Electricity Meters
Grid metering
Electricity Meter
Landis+Gyr E850
ZMQ200
Increased revenue through
high accuracy and tailored
grid functions
Landis+Gyr E850 (ZMQ200) is our latest high precision meter
for all grid metering applications that provides increased cost-
effectiveness and process efficiency in the metering of large
energy quantities.
With its excellent measuring capabilities, exceptional precision,
and reliability, you are equipped for both simple and complex
metering applications. Additionally, this meter provides a
future oriented communication protocol, while offering
complete compatibility with pre-installed metering equipment.
No one can tell what the market will require tomorrow.
A precision meter with tailored functionalities and independent
communication channels for future demands helps to increase
your revenue.
Highest accuracy under all operational conditions
Flexible software configuration for every application
Three independent communication channels for different users
Power quality values for grid application needs
Application
Generation, transmission, substation grid connected I&C consumers
Class 0.2S / 0.5S active, 0.5 / 1 reactive
For all networks, voltages and currents
Interfaces/Communication
Up to eight transmitting contacts and three independent
communication channels, DLMS protocol
Innovation for greater competitiveness
A high-precision meter for production and transmission applications, as well as the facilities of
major consumers. These meters deliver precision, long-term stability and reliability. We provide a
metering system with the highest resolution and measuring dynamics, and a profile memory with
short capture periods. Our meter sets new standards delivering functionality that meets the highest
demands for high-precision metering.
Basic Functionality
Measurement Nominal current 1A or 5A set by parameterization
for Cl.0.2S
Highly stable immune measuring processing
Transmitting contacts
Power Supply 3-phase from measuring-circuit voltage and
additional power supply
Recording Two independent profiles
8 Mbyte memory for profiles and status
8/16/36 measurement channels with total registers
24 energy registers for tariffs
41 diagnostic registers
Event log
Monthly and daily profiles for indicies
Feature Real-time clock with power reserve
Easy adaption to primary values
Power quality values (dips and THD)
Instantaneous voltage and current values
Optical interface according to IEC62056
Backlit display
Housing Wall mount f6
Rack mount f9 with Essailec connector
covers all mounting needs, e.g., cabinets and
panels
Configuration Selectable Communication
M22
G32
P32
E22
B4
C.8
C.4
C.6
RS232 Interface
Application Transformer-operated meter for RS485 Interface
voltage and current transformer
connection PSTN-Modem
Special version for direct voltage GSM-Modem
connection
Measuring Active energy, class 0,2S Ethernet TCP / IP
accuracy Active energy, class 0,5S GSM / GPRS-Module
Reactive energy, class 0,5, 1
Communication Integrated RS485 interface
with DMLS-protocol
Software Energy profiles
Configuration (original meter values) Communication
Parameters Time-of-use (TOU)
Only reliable, total availability of precisely measured data provides
Operating events and alarms the prerequisites for an efficient data processing and billing process.
Voltage and current monitoring In order to meet your communication needs both now and in the
future, the meter features the DLMS protocol. This protocol provides
Voltage and current unbalance
transmission of original meter values to the central station (according
Line and transformer loss to STOM method). With the integrated RS485 interface a direct link
measurement to other meters is possible without the use of a communication unit.
Voltage dip table A module is only required for communication with the central station.
Total harmonic distortion THD
All necessary communication applications are covered by a small
Tariff control number of units. This modularity also offers you full freedom of
CT/VT error correction choice for deploying new technologies.
Bypass feeder operation
Communication unit Q22
Delta values The combination of ZMQ and Q22 allows three completely
Average demand, Pmax independent communication channels with RS485. With Q22 you
can serve a broad range of communication possibilities. The unit
Apparent energy measurement,
power factor allows access to meter data from three independet central stations
at the same time.
Single-phase energy measurement
Status contacts (optional)
- Integration period
- Power threshold
Additional registers allow you to provide a large selection of measured
quantities adding value to your service. Diagnostic values with
threshold registers allow for a comprehensive analysis of the supply.
Operational irregularities are also detected, stored, and transmitted.
Enhanced operating and installation support simplifies the installation
and service.
Our meter provides important functions for measurement in high
voltage networks. These include alarms and operating messages for
network monitoring and additional power supply for remote meter
reading when the measuring circuit voltage is off.
Additional Functionality
Measured Instantaneous values for voltage, current, phase angle,
Quantities power factor (all phases), frequency
THD as a percentage or kWh of active energy
Network Alarm indication with alarm contact
monitoring Operating indication with phase failure and current
without voltage in individual phases
Self-test function
Regular testing of all memories
Voltage, current and power as 1s-Values
Frequency Demand supervision
Additional Special operating mode for low loading of instrument transformer lines
power supply Status information if additional supply is present
Software Tools
MAP 120 Database of parameterization files for an engineering department
MAP 110 Installation support
Primary data adaption
Meter data readout
Load profile analysis
DIP table visualization
Communication settings
MAP 110 configures all settings at the metering point
Manage energy better
Landis+Gyr is the leading global provider of integrated energy management
products tailored to energy company needs and unique in its ability to deliver
true end-to-end advanced metering solutions. Today, the Company offers the
broadest portfolio of products and services in the electricity metering industry,
and is paving the way for the next generation of smart grid.
Landis+Gyr, an independent growth platform of the Toshiba Corporation
(TKY:6502) and 40% owned by the Innovation Network Corporation of Japan,
operates in 30 countries across five continents, and employs 5,000 people with
the sole mission of helping the world manage energy better.
More information is available at www.landisgyr.com.
Landis+Gyr in short
5000 employees worldwide
Operations on all five continents
Broadest portfolio of products and services in the industry
25 years of smart metering experience
1000 AMM systems delivered
300 million energy meters produced
Largest relevant engineering capacity in the industry
65 years of direct load management experience
15 million load management receivers produced
ISO certified for quality and environmental processes
World leader in integrated energy management solutions
Committed to improved energy efficiency and environmental conservation
Solid and established partner network
Landis+Gyr AG
Theilerstr. 1
6301 Zug
Switzerland
Tel. +41 41 935 6000
Fax +41 41 935 6601
[email protected] www.landisgyr.eu
D000011399 k en
Landis+Gyr operates according to the principle of continuous improvement. The information in this document is subject to change without notice and is given without any representation,
warranty or guarantee whatsoever, including as to the accuracy, completeness or suitability for a purpose. The statements made in this document shall not be deemed to be a guarantee or
representation. Landis+Gyr is a trademark of the Landis+Gyr Group. This document is copyright protected. The information is updated at the time of printing (08-2012)
