The Structural Characteristics

of Carbon
C11-5-03

Organic chemistry is an exceptionally important area of chemistry. The majority of chemicals

occurring either naturally or synthetically are organic compounds. The analogy often given is
that if you were looking at the names in a phone book for a city like Winnipeg, 90% of the
names in the phonebook would belong to the family of organic compounds! Essentially, organic
chemistry is the chemistry of the element carbon. As a Group lV element, carbon has
exceptional versatility when it comes to bonding, thus contributing to the vast number of organic
compounds that occur naturally or can be produced synthetically. This lesson focuses on the
bonding of carbon and some of the compounds carbon can form.

What characteristics of carbon give it its unique bonding properties?

Carbon has a few unique bonding properties - the most important of which is its ability to form long chains
of carbon. No other elements can do this. Silicon has the ability to theoretically do this, but silicon-
oxygen bonds are so strong that silicon would much prefer to make Si - O - Si bonds than silicon-silicon
bonds. The reason carbon can do this is that carbon-carbon bonds are extremely strong. This allows
carbon to make up many of the basic building blocks of life (fats, sugars, etc). Also, because carbon
makes four bonds, it is able to exist in many different forms called isomers. No other element naturally
does this as much as carbon.

Bonding of Carbon with itself: Allotropy

Allotropy is a behavior exhibited by certain chemical elements: these elements can exist in two or more
different forms, known as allotropes of that element. In each different allotrope, the element's atoms are
bonded together in a different manner. Allotropes are different structural modifications of an element.
Carbon is an element that exhibits allotropy. Some of its allotropes are shown below:

a) diamond; b) graphite; c) lonsdaleite; d-f) buckyballs (C60, C540, C70);

g) amorphous carbon; h) carbon nanotube.
 Diamond and Graphite are the two most common
and earliest known allotropes of carbon:

Bonding of Carbon with other atoms to form Organic Compounds:

Organic substances are considered to include all compounds of carbon except oxides of carbon,
carbonates, carbides and cyanides. Organic substances include those derived from living organisms as
well as numerous synthetic substances.

Carbon-carbon bonds are strong and stable. This property allows carbon to form an almost infinite
number of compounds; in fact, there are more known carbon-containing compounds than all the
compounds of the other chemical elements combined except those of hydrogen (because almost all
organic compounds contain hydrogen too).

The simplest form of an organic molecule is the hydrocarbon—a large family of organic molecules that
are composed of hydrogen atoms bonded to a chain of carbon atoms. All bonding in hydrocarbons is
covalent.

The Octet Rule states that chemical compounds tend to form so that each atom, by gaining, losing, or
sharing electrons, has an octet (8) of electrons in its highest occupied energy level, (otherwise known as
the “outer shell”). (But for hydrogen atoms the valence is two). The octet rule is a general rule, and is not
followed by all molecules.

Ionic vs. Covalent Bonds:

Covalent Bonds are chemical bonds formed by the sharing of a pair of electrons between atoms. The
nuclei of two different atoms are attracting the same electrons. Ionic bonds result when an electron is
moved from one atom to another. Since we are discussing compounds of carbon in this activity, the focus
will be on covalent bonding.

Why does chemical bonding occur?

 Bonding occurs in order to lower the total potential energy of each atom or ion.  Throughout nature,
changes that decrease potential energy are favoured.

Bonding Analogy:

Because bonding is such a hard concept for students to grasp, It can be broken down by correlating the
main types of bonds to divorce custody agreements.  Ionic bonding would be like where a child lives with
one parent and never sees the other parent. In this case, the parents do not share the child at all. Non-
polar covalent bonding would be like when a child spends one week with one parent and the next week
with the other.  The child is shared equally with both parents. Polar covalent bonding would be like when
the child spends most of the time with one parent, but every Wednesday and every other weekend with
the other parent.  The child is shared, but not shared equally.

Non-Polar Covalent Bonds vs. Polar Covalent Bonds:

Recall that covalent bonds are chemical bonds formed by the sharing of a pair of electrons between
atoms. In bonds between atoms of the same element the sharing of the electrons is equal between the
two atoms. This is referred to as a non-polar covalent bond. When two atoms of different elements
make a bond, the electrons will not usually be shared equally. The electrons are pulled more toward the
more electronegative element. Electronegativity is the measure of the ability of an atom in a molecule to
draw bonding electrons to itself. In general, electronegativity increases from bottom to top and left to right
on the periodic table. Fluorine is the most electronegative element since it has a tendency to pick up
electrons easily and hold on to them strongly. An element like cesium has a low electronegativity. The
unequal sharing of electrons is called a polar covalent bond. The definition of a polar covalent bond is a
covalent bond in which the bonding electrons spend more time near one atom than the other.

How to tell what kind of bond we are dealing with:

Find the electronegativities for each element or ion in compound, (using the electronegativity table provided).

Subtract the electronegativities (using absolute value).

If values are between

4.0-1.7---Ionic bond
1.7-0.3---Polar Covalent bond
0.3-0.0---Non-Polar Covalent

For Example:

H-F molecule: 3.98-2.1 = 1.88, therefore, ionic bond.

C-H bond in CH4: 2.55-2.10 = 0.45, therefore, polar covalent bond.

N≡N molecule: 3.04-3.04 = 0.0, therefore, non-polar covalent bond.

Lewis Dot Structures:

The carbon atom has six electrons, of which four are available for bonding. To reach electronic stability,
carbon atoms must share four electrons from other atoms. (The gaining or losing of four electrons
requires too much energy in such a small atom). Carbon, therefore, forms four (two-electron) bonds to
other atoms, which may be single (one shared pair), double (two shared pairs) or triple (three shared
pairs).

Lewis Dot structure for Carbon:

Lewis Dot Structure and Molecular Models for Methane (the simplest alkane):

VSEPR (valence-shell electron pair repulsion) theory states that valence pairs (pairs available for bonding)
are arranged as far from each other as possible. The repulsion force between electrons is what gives rise to
the shape of molecules. Notice in the above structure of methane that the hydrogen atoms are located as far
apart as possible, giving angles of 109.5o between them. This gives rise to a tetrahedral shape around the
central carbon atom, shown more clearly in the ball-and-stick model on the right. Thus, even though the C-H
bond is polar (as calculated by the electronegativity values above), the molecules is symmetrical and
therefore non-polar overall.

Straight Chain Alkanes

Below is a table that gives the names of the straight chain alkanes. The general formula for an alkane is
CnH2n+2 where n is the number of carbon atoms in the molecule. There are two ways of writing a
condensed structural formula. For example, butane may be written as CH 3CH2CH2CH3 or CH3(CH2)2CH3.

# Carbons Name Molecular Structural

Formula Formula
1  Methane  CH4  CH4 
2  Ethane  C2H6  CH3CH3 
3  Propane  C3H8  CH3CH2CH3 
4  Butane  C4H10  CH3CH2CH2CH3 
5  Pentane  C5H12  CH3CH2CH2CH2CH3 
6  Hexane  C6H14  CH3(CH2)4CH3 
7  Heptane  C7H16  CH3(CH2)5CH3 
8  Octane  C8H18  CH3(CH2)6CH3 
9  Nonane  C9H20  CH3(CH2)7CH3 
 10  Decane  C10H22  CH3(CH2)8CH3 
n CnH2n+2

Multiple Bonds:

Multiple bonds are sometimes found in molecules so that the molecules satisfy the octet rule. A single
bond is when a single pair of electrons is shared between the two atoms. A double bond is when two
pairs of electrons are shared between two atoms. A triple bond is when three pairs of electrons are
shared between two atoms.

Carbon atoms often form multiple bonds with each other to satisfy the octet rule. The class of
hydrocarbons that form single bonds are known as alkanes, while alkenes and alkynes are the names
given to the class of hydrocarbons that form double and triple bonds, respectively. Alkenes have the
general formula CnH2n, while for alkynes it is CnH2n-2.

The molecular models below show the bonding differences in ethane, ethene and ethyne:

Ethane Ethene Ethyne

CH3-CH3 CH2=CH2 CH≡CH

Single C-C bond Double C=C bond Triple C≡C bond

Distinguishing between Carbon Atoms in Hydrocarbons:

When discussing structural formulas, it is often useful to distinguish different groups of carbon atoms by
their structural characteristics. A primary carbon (1º) is one that is bonded to no more than one other
carbon atom. A secondary carbon (2º) is bonded to two other carbon atoms, and tertiary (3º) and
quaternary (4º) carbon atoms are bonded respectively to three and four other carbons. The three C 5H12
isomers shown below illustrate these terms.
 Molecular Structure Activity

Purpose:  to be able to visualize bonding, angles and multiple bonds in many simple organic
hydrocarbons.

Materials:

You will need Ju-Jubes and toothpicks.

Procedure:

Construct the following molecules in three dimensions showing all atoms of one kind of element in the
same colour. Show all bonds.

Draw representations of each molecule in the chart that follows.

*Remember to use the appropriate number of toothpicks if multiple bonds occur.

1. CH4
2. C2H6 (ethane)

3. C2H4 (ethene)

4. C2H2 (ethyne)

5. C3H8 (propane)

6. C3H6 (propene)

7. C3H4 (propyne)
 8. Gasoline (C8H18) (octane)

9. C6H6 (Benzene - cyclic with alternating single and double bonded carbon atoms)

Analysis:

1. Complete the chart below:

Hydrocarbon Chemical Expanded Condensed General

Formula Structural Formula Structural Formula Formula/Type of
Hydrocarbon

Methane

H H CnH2n+2
Ethane C2H6 H-C-C-H H3C-CH3
H H Alkane

Ethene

Ethyne

Propane

Propene

Propyne

Octane

Benzene N/A

Aromatic
2. On the condensed structural formulas above, circle at least one carbon atom with a different color
to indicate whether it is primary, secondary, tertiary or quaternary. Include a legend/key.

3. Compare the general formulas for the alkanes, alkenes and alkynes. Explain why the general
formula differ (i.e. explain the pattern in terms of bonding).

4. Compare your Ju-Jube molecules to the expanded structural formula in your chart. What are the
benefits to making the Ju-Jube molecules?

5. What does each toothpick represent?

6. What effect does each toothpick have in terms of the number of hydrogen atoms that each
carbon has? Explain why each toothpick (i.e. bond) reduces the number of hydrogen atoms on
each carbon atom.

7. What is a saturated hydrocarbon? Which of the hydrocarbons constructed are saturated?

Below are some Animations/Tutorials that may be useful throughout the Organic
Chemistry unit. Some are beyond the scope of the course but may aid in a more
in-depth understanding of organic chemistry.

Chirality, Stereoisomerism and Optical activity :

http://www.learnerstv.com/animation/animation.php?ani=60&cat=chemistry

Hybridization, Bonding and VSEPR Theory: (with audio)

http://www.learnerstv.com/animation/animation.php?ani=199&cat=chemistry

Compound Structure and Representation:

http://ochem.jsd.claremont.edu/movies.dir/repcmpds.htm

Nomenclature of Alkanes (with audio):

http://ochem.jsd.claremont.edu/movies.dir/pre_nomenclature1.htm

Lewis Structures: (with audio):

http://ochem.jsd.claremont.edu/movies.dir/pre_lewisstr.htm

Nomenclature of Functionalized Molecules:

http://ochem.jsd.claremont.edu/movies.dir/pre_nomenclature2.htm
 Electronegativity Table of the Elements
  Group

Period 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

H He
1                                
2.1 0

Li Be B C N O F Ne
2                    
0.98 1.57 2.04 2.55 3.04 3.44 3.98 0

Na Mg Al Si P S Cl Ar
3                    
0.93 1.31 1.61 1.9 2.19 2.58 3.16 0

K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr
4
0.82 1 1.36 1.54 1.63 1.66 1.55 1.83 1.88 1.91 1.9 1.65 1.81 2.01 2.18 2.55 2.96 0

Rb Sr Y Zr Nb Mo Tc Ru Rh Pd Ag Cd In Sn Sb Te I Xe
5
0.82 0.95 1.22 1.33 1.6 2.16 1.9 2.2 2.28 2.2 1.93 1.69 1.78 1.96 2.05 2.1 2.66 2.6

Cs Ba La Hf Ta W Re Os Ir Pt Au Hg Tl Pb Bi Po At Rn
6
0.79 0.89 1.1 1.3 1.5 2.36 1.9 2.2 2.2 2.28 2.54 2 2.04 2.33 2.02 2 2.2 0

Fr Ra Ac
7 Rf Db Sg Bh Hs Mt Uun Uuu Uub          
0.7 0.89 1.1

Ce Pr Nd Pm Sm Eu Gd Tb Dy Ho Er Tm Yb Lu
  Lanthanides
1.12 1.13 1.14 1.13 1.17 1.2 1.2 1.1 1.22 1.23 1.24 1.25 1.1 1.27

Th Pa U Np Pu Am Cm Bk Cf Es Fm Md No
  Actinides Lr
1.3 1.5 1.38 1.36 1.28 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3

                No 0-.6 .66- 1- 1.33- 1.66- 2- 2.33- 2.66-

Key:
 data 6 1 1.33 1.66 2 2.33 2.66

Credit to Craig Counterman (MIT) for this periodic table.