Scribd Logo
Upload

Welcome to Scribd!

  • 448 views

    60NS

    Uploaded by

    Lawrence Lee
    STRUKTOL(r) 40 MS, 40 MS Flakes 60 NS Flakes Mixture of dark aromatic hydrocarbon resins. Mixture of light-colored aliphatic hydrocarbon resin. Homogenizing agents improve the homogeneity of elastomers of different polarity and viscosity.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    60NS

    Uploaded by

    Lawrence Lee
    448 views2 pages
    STRUKTOL(r) 40 MS, 40 MS Flakes 60 NS Flakes Mixture of dark aromatic hydrocarbon resins. Mixture of light-colored aliphatic hydrocarbon resin. Homogenizing agents improve the homogeneity of elastomers of different polarity and viscosity.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    STRUKTOL(r) 40 MS, 40 MS Flakes 60 NS Flakes Mixture of dark aromatic hydrocarbon resins. Mixture of light-colored aliphatic hydrocarbon resin. Homogenizing agents improve the homogeneity of elastomers of different polarity and viscosity.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    448 views2 pages

    60NS

    Uploaded by

    Lawrence Lee
    STRUKTOL(r) 40 MS, 40 MS Flakes 60 NS Flakes Mixture of dark aromatic hydrocarbon resins. Mixture of light-colored aliphatic hydrocarbon resin. Homogenizing agents improve the homogeneity of elastomers of different polarity and viscosity.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Struktol Company of America

    201 E. Steels Corners Road • P. O. Box 1649


    TECHNICAL
    Stow, Ohio 44224-0649 • www.struktol.com
    Phone (330) 928-5188 • Fax (330) 928-8726
    DATA

    STRUKTOL® 40 MS, 40 MS Flakes, 60 NS Flakes


    HOMOGENIZING AGENTS
    RESIN PLASTICIZERS

    COMPOSITION
    40 MS, 40 MS Flakes Mixture of dark aromatic hydrocarbon resins.
    60 NS Flakes Mixture of light-colored aliphatic hydrocarbon resins.

    PROPERTIES 40 MS 40 MS Flakes 60 NS Flakes


    Appearance dark brown non- dark brown pastilles amber-colored pastilles
    hardening resin
    compound
    Ash Content (%, max.) 0.5 2 2
    Softening Point (°C) 50-60 96-106 95-105
    Specific Gravity 1.02 1.06 0.97
    Physiological Behavior refer to safety data sheet
    Storage Stability At least 2 years under the following storage conditions: It is recommended
    that material not be stored at temperatures above 95o F. Care must be taken
    not to double stack since the additional pressure will cause storage stability
    problems. In addition, as with all resins, the material should be used on a
    first- in, first-out basis.
    Packaging 2 kg. PE-sachets with a 25 kg. PE bags 25 kg. PE bags
    low melting point

    -over-

    The information herein is believed to be reliable, but is presented without guarantee or warranty, express or implied. Nothing
    contained herein is to be construed as a recommendation for any use which is in violation of an existing patent.
    Struktol Company of America
    201 E. Steels Corners Road • P. O. Box 1649
    TECHNICAL
    Stow, Ohio 44224-0649 • www.struktol.com
    Phone (330) 928-5188 • Fax (330) 928-8726
    DATA

    RECOMMENDATIONS FOR APPLICATION


    STRUKTOL® homogenizing agents improve the homogeneity of elastomers of different polarity and
    viscosity. They are rapidly absorbed by the polymers during the mixing cycle. A relatively low
    viscosity mass is quickly achieved into which other compounding ingredients can easily be incorporated.
    The homogenizing agents are particularly effective with those elastomer blends, which tend to crumble
    at the beginning of the mixing cycle. The softening viscous resins wet the surface of the crumbs
    promoting the formation of a compact mass.
    The reduction of compound viscosity and "nerve" achieved with STRUKTOL® homogenizing agents
    assist further processing. For instance, bagging tendency can be reduced, extrusion rates are increased
    without increasing the die swell, and calendering properties are improved. These benefits are retained
    even after long storage periods of the green compounds.
    STRUKTOL® homogenizing agents increase the green tack of many compounds although strictly they
    are not tackifiers. They do, however, boost the efficiency of other tackifying agents.
    STRUKTOL® homogenizing agents do not harden during vulcanization. The hardness of the
    vulcanizate is not reduced as much as when using, for example, mineral oil plasticizers.
    Because of their color, STRUKTOL® 40 MS and STRUKTOL® 40 MS Flakes are not suitable for light
    colored compounds. Staining may occur under certain conditions. Where non-staining is specified,
    STRUKTOL® 60 NS Flakes should be used.
    In most cases, the homogenizing agents are added to the polymers within the mixing cycle.
    STRUKTOL® 40 MS, STRUKTOL® 40 MS Flakes and STRUKTOL® 60 NS Flakes have good
    solubility in aromatic and chlorinated hydrocarbons.

    DOSAGE
    4 - 15 phr

    (08/26/97)typ

    The information herein is believed to be reliable, but is presented without guarantee or warranty, express or implied. Nothing
    contained herein is to be construed as a recommendation for any use which is in violation of an existing patent.

    You might also like