Scribd
Upload
116 views2 pages

Technitron T2050: Fixed Format Standard Heat (%), Primary Constant Current Control, or Secondary Constant Current Control

The Technitron T2050 is an all-in-one resistance weld control that combines years of research and development. It uses a 16-bit processor operating at 16MHz to provide accurate and stable welding over a wide range of conditions. It offers options for primary or secondary constant current control and networking capabilities. The compact and cost-effective T2050 provides high-end technology for welding applications.

Uploaded by

Nestor Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
116 views2 pages

Technitron T2050: Fixed Format Standard Heat (%), Primary Constant Current Control, or Secondary Constant Current Control

The Technitron T2050 is an all-in-one resistance weld control that combines years of research and development. It uses a 16-bit processor operating at 16MHz to provide accurate and stable welding over a wide range of conditions. It offers options for primary or secondary constant current control and networking capabilities. The compact and cost-effective T2050 provides high-end technology for welding applications.

Uploaded by

Nestor Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technitron T2050

AC Control

Fixed Format Standard Heat (%), Primary


Constant Current Control, or Secondary
Constant Current Control

The T2050 resistance weld control is a compact All-In-One


weld control. Combining years of research and development
of high-end resistance weld control technology; the T2050 is
an easy to use, reliable, compact, and durable control.

A 16-bit processor operating at 16MHz executing over


4,000,000 instructions per second. This cutting edge
technology provides the ability to operate in AVC (% Heat),
Primary Constant Current, or Secondary Constant Current
with only the “flip” of a switch. This control runs a
sophisticated algorithm that is extremely accurate and
stable over a wide range of welding conditions
A choice of four enclosure styles and a retrofit package are available.
Each unit is built on a common platform, which makes standardization
and interchangeability a reality.

The All-In-One concept also includes networking capability. This optional feature
provides for upload/download of weld schedules, data collection, and data
backup from any weld control on the network. Individual controls can be
connected to a Laptop or PC and perform the same functions.

The T2050 is High End technology in a small cost effective package.

Key Features

Primary or secondary constant current


Chain or successive sequences
Four available linear steppers
DEP can be front, side or remote
mounted
Parts counter
Primary or secondary weld monitoring
60 available schedules
Seven error fault indicators
Technitron T2050
AC Control

Standard Features Options

Constant current control or % of available current Secondary current coil


Primary or secondary current monitoring Network Software
Low current limit Network up to 15 timers
Automatic voltage compensation (AVC) with % Statistical process control (SPC)
available current Program uploading and downloading
Seam mode (intermittent or continuous) Last weld data
Seven faults (E-Stop, Contactor Shorted, Over Fault history
Temp, ½ Cycle, Compensation, Low Current, Anti-Tie down Anti Repeat (“SL”, “ST” and “ML”
and Stepper End) enclosures)
Steppers (four, two-segment linear steppers) Weld indicator light (“SL”, “ST” and “ML”
Successive weld sequences (multiple pilot) enclosures)
Chain multiple sequence (single pilot) Integral gun kit with quick disconnect connector
Pressure switch or second stage operation (“ST” and “ML” enclosures)
External pilots (discrete or binary) Lockout switch
RS-485 Port Retraction (“ST” or “ML” enclosures)
Upload / Download Schedule select box
External E-Stop and No Weld inputs
Program lockout - four different security levels
Repeat or Non-Repeat
Pressure Control via binary outputs
Weld counter / Parts counter
Diagnostic faults

Bench Kit

“ST” Enclosure

“SL” Enclosure “ML” Enclosure

Data Sheet #: ML-00202 R1.1

120 Nowlin Lane, Chattanooga, TN 37421• Phone (423) 894-6234 • Toll Free (800) 669-7669
[email protected] • www.tjsnow.com

You might also like