0% found this document useful (0 votes)
50 views3 pages

Lab - No.3 To Evaluate The Cost Per MWHR For Increasing Load Demand of Five Bus Power System

Power System Control and Operation Lab 3

Uploaded by

Hafeez Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
50 views3 pages

Lab - No.3 To Evaluate The Cost Per MWHR For Increasing Load Demand of Five Bus Power System

Power System Control and Operation Lab 3

Uploaded by

Hafeez Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Lab.No.

3
To Evaluate the Cost per MWhr for Increasing Load
Demand of Five Bus Power System
Apparatus:
 MATLAB Software
 MATPOWER 7.1

Circuit Diagram:

Procedure:
1. First of all, I opened the MATLAB Software from my PC desktop.
2. Then I opened the matpower7.1 in my MATLAB.
3. I run the IEEE-5 bus power system by using the following commands to get before contingency
values:
a = loadcase(‘case5’);
b = runpf(a)
4. Then, I run the file with changed value of load and run the file.
5. Similarly, I observed the values for different loads and calculated their cost.
6. Finally, I plot the table for the lambda and generating cost.
Tables:

Sr. P Q
Load Total Cost
# (Lambda) (Lambda)

16.935 0.357

26.550 0.367

1 1000 30 0.105 17551.89

39.712 -

10 -

17.003 0.362

26.713 0.373

2 2000 30.198 0.107 23552.77

40 -

10 -

17.015 0.409

26.860 0.455

3 3000 30.397 0.101 29612.26

40 -

10 -

17.023 0.432

26.955 0.456

4 4000 30.470 0.056 32303.01

40 -

10 -

17.009 0.385

26.787 0.414

5 5000 30.297 0.104 26577.54

40 -

10 -
Conclusion:
I was able to understand the impact of increasing load in the 5-bus power system and its impact on total cost
of the system. I became familiar with the load bus system of IEEE-5. I became familiar with working on the
MATLAB Software and I was able to see the implementation of the load bus power system in it. I was able
to analyze the IEEE-5 bus system with different load parameters and concluded its behavior with increasing
load on P and Q.

You might also like