27Th Dod Explosives Safety Seminar: AUGUST 1996
27Th Dod Explosives Safety Seminar: AUGUST 1996
27Th Dod Explosives Safety Seminar: AUGUST 1996
AUGUST 1996
M J A GOULD
ABSTRACT
With the changing role of UK forces and, in particular, with reference to the Royal Air
Force role in the Rapid Reaction Force, the logistic requirements for bomb storage are
changing. Bombs may, in future, be stored in all-up condition, ie with fuses, fins etc
assembled, and will be stored in all-up round containers (AURCs). They may also be
stored in ISO containers. These changes of storage policy have repercussions in the
ESTC rules governing the storage of bombs. In this paper the currently available test
information regarding the effects of inter-stack stand-off, orientation, stacking height and
traversing is reviewed and analyzed in the light of these new requirements. ISO container
storage is not considered. Recommendations are made on the precautions to be taken
to avoid inter-stack propagation in the event of the accidental initiation of one stack.
Form Approved
Report Documentation Page OMB No. 0704-0188
Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and
maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information,
including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington
VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if it
does not display a currently valid OMB control number.
16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF 18. NUMBER 19a. NAME OF
ABSTRACT OF PAGES RESPONSIBLE PERSON
a. REPORT b. ABSTRACT c. THIS PAGE Same as 24
unclassified unclassified unclassified Report (SAR)
1. The UK conditions for the storage of HE bombs have, to date been those prescribed
in ESTC Leaflet No.5, Part 2 (see Annex A). Although it is not stated, the prescription
relates to the storage of iron bombs without fuses, fins etc and with the fuse wells
protected with robust plugs. That is to say that the bombs must not contain explosives
other than the main filling and, possibly, the booster explosive. There must also be
adequate all round protection from attack by shock or fragments from a nearby donor
explosive event. The requirement, when D1 conditions apply, for a stack height no greater
than one metre has effectively prevented stacking of bombs.
2. With the changing roles of the RAF and in particular with reference to their role in
the Rapid Reaction Forces, tactical and logistic requirements for the storage of bombs are
changing. The RAF now requires (Reference 1) that bombs should be stored in an all-up
condition ready for use in All Up Round Containers (AURCs). The AURCs may be
required ultimately to be stored in ISO Containers. This change of storage concept
presents three major problems in terms of the current ESTC prescription:
b. With the use of AURCs the separation distance between bombs is increased
and the density of bombs (bombs per unit storage area) achieved under current
single layer conditions can only be equalled by stacking.
c. Storage of bombs in ISO containers has never been considered and the
consequences of an accidental initiation both in terms of donor and acceptor effects
may be different.
3. In Reference 2, the RAF have prioritised their requirement for advice on future
bomb storage. It is the purpose of this paper, in line with their priorities, to address
problems a. and b. above.
LITERATURE SURVEY
5. A series of tests were carried out between 23 May 1945 and 5 June 1945 "to
determine the minimum safe distances at which pads of 150lb G. P. T-I bombs without
boosters might be stored without danger of the detonation of one pad propagating to an
adjacent pad". The results are summarised in Table 1 and the conclusions drawn at the
time were as follows:
a. When these bombs are stored one bomb high and nine bombs wide and
placed nose to tail within each pad, 25,000 or 50,000 pounds of explosives may be
safely placed in pads spaced 100ft apart.
b. The tail of these bombs is the most dangerous part as regards adjacent piles
because the missiles produced are much heavier resulting in numerous
penetrations of adjacent bomb cases, while no such effects were observed from the
nose.
c. When the bombs are stored one bomb high and nine bombs wide and with
the noses of four rows facing in one direction and the noses of the other five rows
facing in the opposite direction so that only the noses of bombs face towards
adjacent pads, the safe distance between pads may be reduced to 50 feet for
25000 pounds of explosive per pad.
d. When the bombs are placed as in a. or c. above, the debris from the their
detonation will be generally within the area enclosed by the prolongation of the
sides of the pad and with little or no debris off the corners of the pad."
7. In 1946 the ESTC were requested by the Air Ministry to "express an opinion as to
the safety from propagation of the standard operational supply dumps laid out on an
aerodrome". A series of trials was designed to investigate the possibility of propagation
between typical bomb dump arrangements both with and without traverses. The results
of these trials are summarised in Table 2.
c. The use of empty bomb cases in lieu of an earth traverse was unsuccessful.
d. It has been shown, albeit in only one test, that reaction is not propagated
between earth traversed stacks of 36000kg NEQ separated by 11m (0.33Q1/3 or
nearly D1 distance).
e. Stacks three or four tiers high can be adequately isolated using traverses
designed in accordance with ESTC prescriptions.
9. These trials were, in essence, a continuation of the Soltau trials. They were
designed to test the likelihood of communication between untraversed bomb stacks in the
standard Air Ministry spacing of 125yds and also at 250yds. The results of the trials are
summarised in Table 3.
11. A programme of trials was designed by a USAF special study group, tasked in
September 1966 to determine, based on existing information, if existing bomb storage
quantity-distance criteria could be reduced. Such reductions were sought as real estate
for bomb storage was insufficient. The need for these trials was confirmed by a Munitions
Safety Assessment Team in late September 1966. The tests were to represent standard
barricaded field storage conditions using 250,000lbs donor charges and acceptors of
100,000lbs at "K1.1 distances"(0.43Q1/3 in metric units). The results of the trials are
summarised in Table 4.
c. The modular concept developed by the Air Force Special Study Group and
approved for use in combat zones is sound for large quantity munitions storage.
A module consists of five cells separated from one another by intermediate
barricades.
13. Revised quantity-distance criteria established within the USAF were included in the
USAF Explosives Safety Manual in February 1968.
14. This programme of tests, carried out in 1985 and 1986, was designed to investigate
the use of inert buffer materials between stacks of Mk82 and Mk84 bombs. The buffer
materials were limited to those inert materials which are required to be stored at or near
bomb storage areas. In addition the effects of the orientation of bombs, ie nose to tail,
nose to nose etc. were investigated. The results are summarised in Tables 5 and 6.
15. They conclude that "propagation between stacks of MK82 or MK84 bombs can be
prevented when they are properly oriented, separated, steel nose and tail fuse well
protection is provided and buffer material proven adequate in this test series is used".
16. In open stack storage situations they have shown that, even at as little as 15ft
separation, by orienting the bombs in nose to nose arrays, given that the fuse wells are
protected, acceptor reaction is prevented. However bombs in the acceptor stacks are
damaged by fragment attack.
DISCUSSION
17. Limited information exists regarding the stack to stack reaction between bombs
fitted with fuses. In four of the tests of buffered Mk82 bombs (Table 5), acceptors were
fitted with fuses and booster explosives. These showed that, given an inert barrier
between stacks, there was no reaction in the N(ose)6T(ail) donor6acceptor orientation and
a minor reaction in the T6N direction. The N6N orientation was tested twice and on
neither occasion was there any reaction. This same performance in the N6N orientation
could be emulated by the insertion of a steel rod into the bomb fuse cavities. With plastics
rods in the fuse wells, full detonations occurred in N6T and T6N orientations.
18. Furthermore in tests with MK84 bomb stacks (Table 6) with no barrier at 4.57m
(0.21Q1/3) separation, in the N6N orientation there were no events in four tests whereas
in any other orientation (3 tests each N6T and T6N, 2 each with inert barriers) there were
events ranging from partial events to full detonations. In the N6N cases there was
fragment damage and erosion of the noses of the bombs.
19. Thus, given that the fuse complies with the necessary safing and arming standards,
and the stacks of bombs are directed nose to nose there should be little chance of
propagation between stacks separated by at least 0.21Q1/3. However the number of tests
carried out was small and the confidence in a high probability that propagation will not
occur cannot be high. Therefore, for additional protection the introduction of traverses to
intercept primary fragments between stacks (see paras 24 et seq) will prevent high velocity
fragment attack on acceptor bombs.
20. In all the trials summarised above, with the exception of the 1945 Wingate Trials,
bombs were stacked more than one tier high. In the trials used above to support the
conditions for storage of ready fused bombs, Mk 82 500lb bombs were stacked two high
and Mk 84 2000lb bombs three high. In the Wingate Trials (Table 1) it will be seen that
similar N6N results were achieved between single layer stacks albeit at longer ranges
(>15.24m or 0.68Q1/3). In these same trials there were occasions at the same separation
when N6T or T6N oriented stacks did not interact).
21. Thus, as might be expected, increasing the stack height will increase the probability
for interaction in the N6T and T6N and indeed the S(ide)6S(ide) orientations as the target
presented to the fragments from the donor is much greater. However, by adopting the
N6N orientation where the number of donor fragments is small and the individual bomb
presented area is small and obliquely angled, this increased fragment attack "cross-
section" can be overcome and the probability of propagation between stacks significantly
reduced.
22. The packaging of bombs in AURCs effectively separates the bombs from one
another both within the AURC and between AURCs. This separation is not so effectively
achieved when bombs are strapped to pallets as, on any one pallet the bombs are held in
close contact with each other.
23. It is known that, when shell or bombs are initiated in close contact with each other,
a reaction zone is generated between the munitions within which fragments of much higher
velocity and density can be generated (Reference 8). By separating the munitions even
by a fraction of one charge diameter it is believed that this effect can be diminished.
Therefore the use of AURCs, or to a lesser extent palletisation may have the advantage
of reducing these enhanced fragmentation effects and thus reducing the chance of
propagation.
24. It has been shown above that the probability of inter-stack propagation can be
markedly reduced, in particular, by appropriately orienting the bombs within stacks relative
to one another. However, to ensure that the probability of fragment initiated propagation
is reduced to the absolute minimum, the fragments must be prevented from arriving at the
acceptor stack, or, if they do arrive, they should have insufficient energy to stimulate a
reaction in the acceptor bombs. A number of types of barricade have been tested in the
trials surveyed:
a. Simple earth traverses were used in many of the tests (see Tables 2 & 4). These
were typically 1:2 sloped compacted local earth with a 0.91m wide top. They
extended above the height of the bomb stacks by at least 0.66m. They comply with
the ESTC requirements for Standard Double Slope Traverses.
b. Various stacks of inert components or small calibre ammunition (Tables 2 & 5).
e. Soil/cement mixture traverses allowing steep (3:1) sides with 0.91m minimum
thickness (Reference 6).
25. Simple earth traverses were shown to be very effective. In 12 out of the 14 tests
carried out acceptor bombs were all undamaged though covered in the earth displaced
from the traverse. In the remaining two tests low order events occurred, one where a
750lb bomb was pinched between the two broken halves of the concrete ground slab and
the other where a 750lb bomb had fallen from the top of the stack and was then crushed
by a 2000lb bomb. There was no evidence of any interaction between these bombs and
those around them.
26. The protection provided by stacks of inert components, small calibre ammunition
and oil drums was very variable and highly dependent on the orientation and disposition
of the stacks. For example, in one test, (Table 5), a barricade of one row of CBU58s,
cluster bombs classified HD 1.2, resulted in a low order event in the acceptor and on two
occasions a two row barricade of the same munitions resulted in full detonation of the
acceptor. It is unlikely that any general rules for this type of barricade can be deduced
owing to the dependence on the specific nature, geometry, stacking etc of the barrier
components.
27. In the trials in which metal bin and soil/cement traverses were tested, live acceptor
charges were not used. It is not, therefore, possible to comment on their efficiency in
preventing propagation. However, it was found that, in the case of the metal bin barriers,
components of the bins themselves became a hazard in that they were thrown upwards
of 250m, in one case steel sections were found 460m away. The soil/cement traverse
behaved much like earth traverses. Some larger lumps of the soil/cement matrix were
thrown around 10m, the rest breaking down and covering the area beyond the traverse to
about 0.9m depth. A paper on related barrier designs is presented elsewhere in this
Seminar.
28. Whilst no trials evidence has been presented here there is growing opinion that
barriers of water will be very effective in preventing propagation between stacks. If this
is considered an attractive proposition from the user's point of view it could be further
investigated.
29. Given that the precautions so far described (use of earth traverses, appropriate
bomb orientations and seperations) are taken, the "Big Papa" trials (Table 4) showed that
propagation could be prevented with donor charges up to 113400kg at separation
distances down to 15.2m (0.31Q1/3). The donor charge layout in these tests was four rows
of bombs four tiers high, the overall stack dimensions being 12.2m x 9.1m x 2.7m high.
There is no reason to suppose that the extension of the stack in the long dimension with
appropriate extension of the traverses should increase the likelihood of propagation.
Therefore the total NEQ in any one stack could, potentially be much greater than
100,000kg. The important consideration should, therefore be the number of munitions that
can economically or tactically be put at risk in any one stack.
Size of bombs
30. Whilst the evidence presented above brackets but does not specifically include
tests on 1000lb bombs, there is nothing to indicate that, unless bomb case thicknesses
and materials are markedly different, the effects and reactions from stacks of both smaller
and larger bombs should not be relevant to 1000lb bombs. Traverses, given that they are
of sufficient height relative to the stack heights, along with stacking orientation controls,
will ensure that fragment initiation of acceptors will not occur. Shock wave initiation of
acceptors without fuses from donors as close as 0.31Q1/3 for NEQs of 113400kg does not
occur (Table 4). For smaller NEQs up to 8816kg, including bombs fitted with type 904 and
905 fuses, (Table 6), no shock interaction, either air or ground transmitted, has been
observed as close as 0.21Q1/3. Again, unless there are marked design differences in the
1000lb bombs or in the robustness of the fuses, this data will read across to those bombs.
31. Given that the acceptor bombs are protected from the donors by a traverse, the
acceptors will only be vulnerable to air or ground transmitted shock. Ignoring secondary
effects, eg the bomb pinched between segments of a concrete pad lifted by ground shock
(Reference 6), the susceptibility of the bombs will be very much a function of the shock
sensitivity of their fillings. In Table 7 (extracted from Reference 9) Large Scale Gap Test
results are given for the explosives used in the various test programmes. The most
sensitive, Pentolite, filled bombs were used in the Soltau tests to address the problem of
shock interaction between stacks. At 0.33Q1/3 there was no reaction in the acceptor stack.
In the Buffered Bomb tests some bombs contained booster explosives whose Gap test
energies would be between 1GPa and 2GPa. Again no acceptor reactions were observed
which could be related to an air or ground shock interaction.
CONCLUSIONS
32. The storage of stacks of 1000lb bombs in an all-up condition complete with fuses
and tail fins etc will not adversely effect their vulnerability to shock from the accidental
initiation of neighbouring stacks of bombs provided that the conditions currently laid down
in ESTC Leaflet 5 Part 2 for the storage of unfused bombs. The insertion of the fuses into
their fuse wells may reduce the vulnerability of acceptor stacks relative to that of unfused
or lightly capped bombs (paras 17 et seq) when donor and acceptor bombs are oriented
nose-to-nose.
33. Stacking of bombs in their AURCs to a height of 3 tiers is acceptable as long as the
earth traversing is increased in height commensurate with the height of the stack of bombs
and in accordance with ESTC prescriptions. Nose to nose orientation between bombs in
adjacent stacks will further reduce the probability of interaction (paras 20,21) and the
separation provided by the packaging may reduce the fragment hazard from the donor.
34. Whilst earth traverses built to ESTC prescriptions perform well in preventing the
fragment attack of acceptor stacks, the effectiveness of inert munition component or small
calibre ammunition barriers is highly dependent on the specific components and their
stacking arrangements and it is thus impossible to generate generic prescriptions for their
use. Some guidance has been given in NATO Manual AASTP-1 (Reference 10) on
specific arrangements found to be effective.
35. Stack size need only be limited by consideration of the maximum acceptable losses
that will be incurred in the event of an accidental initiation of an individual stack and the
normal IBD considerations calculated on the basis of the maximum credible event being
a single stack.
36. Given that there is no major excursion from the traditional iron bomb case design
principals, the above conclusions are independent of the size of the individual bombs.
37. Propagation by ground or air shock will not occur given that the main charge filling
or booster explosives have Large Scale Gap Test sensitivity results in excess of 1GPa.
RECOMMENDATIONS
38. That ESTC Standards be amended to include the storage of all-up bombs either
palletised or in all up round containers within current advice for the storage of unfused
bombs subject to the restrictions specified below.
39. Bombs stored either on pallets or in their AURCs are to be stacked no more than
3 tiers high.
41. That the outside rows of bombs in any one stack are oriented such that they are
nose-to-nose with the bombs in the outer rows of adjacent stacks.
42. An assessment of new fuze designs should be made to determine their vulnerability
to blast and fragment impact compared to those used in the tests reported.
43. That consideration be given to the potential for the use of barriers constructed of
alternative materials between stacks of bombs. US work in the field should be reviewed
and augmented where necessary by a UK programme of tests.
3. Tests With Bombs, 150#, G P T-I, Army-Navy Explosives Safety Board Report
dated 18 June 1945.
9. Explosion Effects and Properties - Part III. Properties of Explosives and Explosive
Compositions, Thomas N Hall & James R Holden, NSWC, Dahlgren, Report NSWC
MP 88-116, October 1988.
10. AASTP-1, Manual of NATO Safety Principles for the Storage of Military Ammunition
and Explosives
TABLE 1 SUMMARY OF THE 1945 WINGATE TRIALS (Reference 3)
150 37.8 TNT 11338 NONE 15.24 150 37.8 TNT 11338 N6T NO
LB LB REACTION
MINOR
DAMAGE
150 37.8 TNT 11338 NONE 22.86 150 37.8 TNT 11338 T6N NO
LB LB REACTION
MINOR
DAMAGE
150 37.8 TNT 11338 NONE 7.62 150 37.8 TNT 11338 N6T NO
LB LB REACTION
MINOR
DAMAGE
150 37.8 TNT 11338 NONE 15.24 150 37.8 TNT 11338 T6N SOME
LB LB REACTIONS
MUCH
DAMAGE
150 37.8 TNT 11338 NONE 15.24 150 37.8 TNT 11338 T6T SOME
LB LB REACTIONS
MUCH
DAMAGE
150 37.8 TNT 11338 NONE 15.24 150 37.8 TNT 11338 N6N NO
LB LB REACTION
NO DAMAGE
150 37.8 TNT 11338 NONE 22.86 150 37.8 TNT 11338 T6T SOME
LB LB REACTIONS
SOME
DAMAGE
150 37.8 TNT 11338 NONE 22.86 150 37.8 TNT 11338 N6N NO
LB LB REACTION
NO DAMAGE
TABLE 1 Continued
150 37.8 TNT 11338 NONE 30.48 150 37.8 TNT 11338 T6T NO
LB LB REACTION
SOME
DAMAGE
150 37.8 TNT 11338 NONE 30.48 150 37.8 TNT 11338 N6N NO
LB LB REACTION
MINOR
DAMAGE
150 37.8 TNT 11338 NONE 30.48 150 37.8 TNT 11338 T6T NO
LB LB REACTION
NO DAMAGE
150 37.8 TNT 11338 NONE 30.48 150 37.8 TNT 11338 N6N NO
LB LB REACTION
MINOR
DAMAGE
150 37.8 TNT 22676 NONE 30.48 150 37.8 TNT 22676 N6T NO
LB LB REACTION
NO DAMAGE
150 37.8 TNT 22676 NONE 38.1 150 37.8 TNT 22676 T6N NO
LB LB REACTION
NO DAMAGE
150 37.8 TNT 22676 NONE 30.48 150 37.8 TNT 22676 N6T NO
LB LB REACTION
NO DAMAGE
150 37.8 TNT 22676 NONE 30.48 150 37.8 TNT 22676 T6N NO
LB LB REACTION
MINOR
DAMAGE
TABLE 1 Continued
150 37.8 TNT 11338 NONE 15.24 150 37.8 TNT 11338 N6N NO
LB LB REACTION
MINOR
DAMAGE
150 37.8 TNT 11338 NONE 15.24 150 37.8 TNT 11338 N6N NO
LB LB REACTION
MINOR
DAMAGE
NOTES
500 88 MINOL 20333 TOP 9.50 500 88 MINOL 20333 T6T NO REACTION
LB (i) SOIL LB NO DAMAGE
250 36.3 AMATOL 20390 TOP 10.97 250 36.3 PENTOLITE 20390 T6T NO REACTION
lb 60/40 (ii) SOIL LB NO DAMAGE
250 36.3 AMATOL 36281 TOP 10.97 250 36.3 PENTOLITE 36281 T6T NO REACTION
LB 60/40 & (iii) SOIL LB D1 NO DAMAGE
PENTOLITE
D1
250 36.3 AMATOL 20390 NONE 18.29 250 36.3 AMATOL 20391 T6T BOTH STACKS
LB 60/40 & (iv) LB 60/40 & DETONATED
PENTOLITE PENTOLITE
D1 D1
250 36.3 AMATOL 20245 EMPTY 18.29 250 36.3 AMATOL 20245 T6T BOTH STACKS
LB 60/40 & (v) BOMB LB 60/40 & DETONATED
PENTOLITE CASES PENTOLITE
D1 D1
500 88 MINOL 2 OR 36249 TOP 10.97 4000 1306.1 AMATOL 33959 T6T NO REACTION
LB TNT OR (vi) SOIL LB NO DAMAGE
RDX/TNT
NOTES
i. Donor and acceptor charges 5 rows of 40 bombs with 31 bombs on 2nd tier in front row.
ii. Donor and acceptor charges 6 rows of 94 bombs in 3 tiers.
iii. Donor and acceptor charges 6 rows of 167 bombs in 4 tiers.
iv. Donor and acceptor charges 2 rows of 268 and 294 bombs in 7 tiers.
v. Donor and acceptor charges 3 rows of 186 bombs in 4 tiers.
vi. Donor and acceptor charges 5 rows of 83 bombs in 3 tiers.
vii. All bombs were complete with exploder but without detonators. Transit plugs were fitted in the nose fuse wells.
TABLE 3 SUMMARY OF THE 1947 ESTC DUNE AND HELIGOLAND TRIALS (Reference 5)
250 40.59 MINOL 2 22649 NONE 114.3 250 40.59 MINOL 2 22649 T6T DELAYED
LB (i) LB REACTION
(25
MINUTES)
FULL
DETON'N
250 40.59 MINOL 2 22649 NONE 228.6 250 40.59 MINOL 2 29225 T6T DELAYED
LB (ii) LB (iii) REACTION
(17
MINUTES)
FULL
DETON'N
250 40.59 MINOL 2 22649 NONE 228.6 250 40.59 MINOL 2 15099 T6T NO
LB (ii) LB (iv) REACTION
NOTES
M66A2 535 TRITONAL 113400 EARTH 21.3 M66A2 535 TRITONAL 113400 N6T NO
(191) (v) (191) (vi) REACTION
M117 175 M117 175 NO DAMAGE
(62) (62)
M66A2 535 TRITONAL 113400 EARTH 17.8 M66A2 535 TRITONAL 34020 S6S NO
(191) (v) (55) (vi) REACTION
M117 175 M117 175 NO DAMAGE
(62) (26)
M66A2 535 TRITONAL 113400 EARTH 21.3 M66A2 535 TRITONAL 34020 T6N ONE BOMB
(191) (v) (55) (vi) LOW
M117 175 M117 175 ORDER
(62) (26) (ii)
M66A2 535 TRITONAL 113400 EARTH 48.2 M66A2 535 TRITONAL 34020 S6S NO
(191) (v) (55) (vi) REACTION
M117 175 M117 175 NO DAMAGE
(62) (26)
M66A2 535 TRITONAL 113400 EARTH 53.0 M66A2 535 TRITONAL 34020 S6S ONE BOMB
(191) (v) (55) (vi) (vii) LOW
M117 175 M117 175 ORDER
(62) (26) (iii)
M66A2 535 TRITONAL 113400 EARTH 21.3 M66A2 535 TRITONAL 34020 T6N NO
(191) (v) (55) (vi) REACTION
M117 175 M117 175 NO DAMAGE
(62) (26) (iv)
M66A2 535 TRITONAL 113400 EARTH 15.2 M66A2 535 TRITONAL 34020 S6S NO
(191) (v) (55) (vi) REACTION
M117 175 M117 175 NO DAMAGE
(62) (26)
TABLE 4 Continued
M66A2 535 TRITONAL 113400 EARTH 21.3 M66A2 535 TRITONAL 34020 N6T NO
(191) (v) (55) (vi) REACTION
M117 175 M117 175 NO DAMAGE
(62) (26)
M117 175 TRITONAL 14000 EARTH 24.4 M66A2 535 TRITONAL 20865 N6T NO
(80) (viii) REACTION
NO DAMAGE
M117 175 TRITONAL 14000 EARTH 24.4 M66A2 535 TRITONAL 20865 S6S NO
(80) (VIII) REACTION
NO DAMAGE
NOTES
MK82 81.63 H6 8816 NONE .76 MK82 81.63 H6 980 N6T FULL
500LB 500LB DETONATION
MK82 81.63 H6 8816 NONE .76 MK82 81.63 H6 980 T6N FULL
500LB 500LB DETONATION
MK82 81.63 H6 8816 1 ROW 1.52 + AMMO MK82 81.63 H6 980 N6T NO REACTION
500LB 20MM TP 500LB
(ii) PALLETS FUSED
MK82 81.63 H6 8816 1 ROW 1.52 + UNITS MK82 81.63 H6 980 T6N ONE LOW
500LB CBU58 500LB ORDER
(ii) FUSED
MK82 81.63 H6 8816 7 ROWS 1.52 + FINS MK82 81.63 H6 2939 T6N NO REACTION
500LB MK 15 500LB
FINS
MK82 81.63 H6 8816 2 ROWS 1.52 + AMMO MK82 81.63 H6 2939 N6T FULL
500LB 20MM TP 500LB DETONATION
PALLETS
MK82 81.63 H6 8816 2 ROWS 1.52 + UNITS MK82 81.63 H6 2939 T6N FULL
500LB CBU58 500LB DETONATION
MK82 81.63 H6 8816 5 ROWS 1.52 + FINS MK82 81.63 H6 2939 N6T NO REACTION
500LB MK 15 500LB
FINS
MK82 81.63 H6 8816 2 ROWS 1.52 + UNITS MK82 81.63 H6 2939 T6N FULL
500LB CBU58 500LB DETONATION
(iii) (i)
MK82 81.63 H6 8816 2 ROWS 1.52 + FINS MK82 81.63 H6 2939 N6T FULL
500LB MK 15 500LB DETONATION
(iii) FINS
TABLE 5 Continued
MK82 81.63 H6 8816 2 ROWS 1.52 + FINS MK82 81.63 H6 1959 N6N NO REACTION
500LB MAU FINS 500LB
(ii) PALLETIZ
ED
MK82 81.63 H6 8816 3 ROWS 1.52 + AMMO MK82 81.63 H6 1959 N6N NO REACTION
500LB 20MM TP 500LB
(ii) PALLETS
MK82 81.63 H6 8816 2 ROWS 1.52 + UNITS MK82 81.63 H6 2939 N6N NO REACTION
500LB CBU58 500LB
(iv)
MK82 81.63 H6 8816 3 ROWS 1.52 + UNITS MK82 81.63 H6 2939 N6N NO REACTION
500LB CBU58 500LB
(iv)
NOTES
i. All donors and acceptors had plastic nose and tail plugs unless otherwise stated.
ii. All acceptors fused with Type 904 and 905 fuses.
iii. All acceptors fitted with 150mm plastic rods in fuse wells.
iv. All donors and acceptors fitted with steel rods in fuse wells.
v. All stacks were 2 tiers high.
TABLE 6 SUMMARY OF THE 1986 BUFFERED MK84 BOMB TRIALS (Reference 7)
MK84 428.6 H6 10285 NONE 4.57 MK84 428.6 H6 5143 N6N NO REACTION
2000LB 2000LB SOME
DAMAGE
MK84 428.6 H6 10285 NONE 4.57 MK84 428.6 H6 5143 N6N NO REACTION
2000LB 2000LB SOME
DAMAGE
MK84 428.6 H6 10285 NONE 4.57 MK84 428.6 H6 5143 T6N FULL
2000LB 2000LB DETONATION
MK84 428.6 H6 10285 NONE 4.57 MK84 428.6 H6 5143 N6T FULL
2000LB 2000LB DETONATION
MK84 428.6 H6 10285 NONE 4.57 MK84 428.6 H6 5143 N6N NO REACTION
2000LB 2000LB SOME
DAMAGE
MK84 428.6 H6 10285 NONE 4.57 MK84 428.6 H6 5143 N6N NO REACTION
2000LB 2000LB SOME
DAMAGE
MK84 428.6 H6 10285 1 ROW 4.57 INC MK84 428.6 H6 5143 T6N 1 LOW
2000LB 55GAL DRUMS 2000LB ORDER
DRUMS SEVERE
DAMAGE
MK84 428.6 H6 10285 1 ROW 4.57 INC MK84 428.6 H6 5143 N6T 1 LOW
2000LB 55GAL DRUMS 2000LB ORDER
DRUMS SEVERE
DAMAGE
MK84 428.6 H6 10285 5 ROWS 4.57 INC MK84 428.6 H6 5143 T6N 1 LOW
2000LB 55GAL DRUMS 2000LB ORDER
DRUMS SEVERE
DAMAGE
TABLE 6 Continued
MK84 428.6 H6 10285 5 ROWS 4.57 INC MK84 428.6 H6 5143 N6T 1 LOW
2000LB 55GAL DRUMS 2000LB ORDER
DRUMS SEVERE
DAMAGE
NOTES
b. The bombs must be relatively strong so as to withstand intense air shock without
being crushed.
c. There should be the minimum of flammable dunnage, etc., which could catch
alight and lead to subsequent mass explosion of a stack.
d. When the D1-distances are used then the stacking height must not exceed 1 m.
D1-distances: 0.35Q1/3
D2-distances: 0.44Q1/3