Fomrhi-026 Restoring Keyboard Instruments Barnes

Download as pdf or txt
Download as pdf or txt
You are on page 1of 65

O

No 26 January 1982 *P- ^^.--Unan

FOMRHI Quarterly

BULLETIN 26 2
LIST O F MEMBERS SUPPLEMENT 31
INDEX 1981 29
BOOK NEWS 33
BOUWBREEF CONTENTS XXIII 9

COMMUNICATIONS
388 Yet More on Organological Terminology. J. Montagu 10
389 Should Museum I n s t r u m e n t s be Used? J. Montagu 11
390 Construction of Ivory Cornetti and Tuning
Cornetti at the Sharp End. P. Gretton 13
391 Brass. C. Karp 19
392 A Method of Casting H a r p s i c h o r d R o s e s . J.Paul 21
393 Keyboard R e s t o r a t i o n . J. B a r n e s 24
394 About R e s t o r a t i o n R e p o r t s for F o r t e p i a n o s . J. H e r m o n s 26
395 Construction of Viol Bellies by Bending all Staves.
E. Segerman and J. Duncalf 28
396 Production of P l e c t r u m from Bird F e a t h e r s .
A. Lajaruzny 34
397 Sound Hole Evolution . . . A. Lajaruzny 36 1
398 ASurveyof Lute G r a c e s in the R e n a i s s a n c e and
E a r l y B a r o q u e . E. Segerman 41
REVIEWS 61
399-402 Laying and Decorating H a r p s i c h o r d P a p e r s by P&A
Mactaggart. Modern H a r p s i c h o r d M a k e r s by J. Paul.
A Check-liat of the Double-Reed Musical I n s t r u m e n t s in
t h e Edinburgh University Collection . . . by L. LangwiH.
A Dictionary of E a r l y Music by J. &. E. Roche. All by J. M.

SHIP O F MAKERS AND RESTORERS OF HISTORICAL INSTRUMENTS


•C* J - M o i r t a g u , c / o Faculty of Music, St. A l d a t e ' s Oxford OX1 1DB,U.K.
Bull.26,

FELLOWSHIP of MAKERS and RESTORERS of HISTORICAL INSTRUMENTS


Bulletin no. 26 Januaryt 1982_
As usual in the January Bulletin, a happy new year to a minority
of our members — the rest will read this greeting as and when they
get round to renewing their subscriptions.
Margaret and I thank you for all your greetings and good wishes.
Margaret has asked me to say a few things for her:
a) if you wish to be formal when writing to her, she is Mrs, but she
is quite happy to be Margaret Crowe; do please note that she is
not a manuscript.
b) try to get her address right; at least one renewal went over the
road and stuck there until the people in that house came back
from holiday. It does help to put Margaret Crowe on the envelope
as well as FoMRHI.
c) try to remember next year (and I'll try to remember to remind you,
though it»s clear enough on the form) to make cheques etc payable
to FoMRHI, not to her.
d) put the right postage on the envelope.
I gather from Cary Karp that we have been guilty of putting the
wrong postage on. Would those members in Europe who pay for air mail
please note that what should be on their envelopes is the two words
ALL UP; there shouldn't be anything about printed matter or reduced
rate. If they get an envelope with printed matter on it, would they
please tell Enzo (his address is in the List of Members) straight
away so that he gets it right next time. (His surname is Puzzovio
in case you've forgotten who does the mailing). I'm not sure what
ALL UP means, but it's what the Post Office says should be on letters
to make sure they go by air mail instead of rowing boat. One other
check, of course, is the postmark if it's legible. Air mail should
not take more than a week to anywhere; surface mail, even just across
the Channel, seems to be three weeks minimum; it can take a week to
get across Oxford.
LOST MEMBERS: Q.25 hasn't reached Jane Hutber of Telford and Per
Sabelstrom "of Uppsala. If anyone knows where they now are, would
they please let me know, and if they happen to bump into either of
them, please tell them that the subscription for 1982 is the same
as last year.
INDEX: You will see that one of the Comms herewith is an Index to
the 1981 Qs. We owe this to Rod Jenkins who spent so much time
searching through for something that he remembered reading that,
having made an index of viol-related articles, he decided to do the
whole job. He would be willing to do the whole job if people would
welcome the idea, and asks for any comments that might improve the
one that he's done. He has omitted reviews and book news because
he was ubcertain whether author's name or first word of title, or
what would be best, and would welcome comments on that also.
FURTHER TO: Bull.23, p. 6. I wrote a note about the Korg WT 12
Tuning Meter. Geoff Burton says that he's had one for about 18
months and is very impressed with it. He says: "I must admit that
when I first got the meter, I felt a bit embarrassed and even slight-
ly ashamed. It seemed an admission that my ear was not all it might
be. A very foolish attitude I now feel. In fact, I have found that
it has done a great deal to improve the 'fine-tuning' of my ear. I
bull.2b. p.;?

certainly would not have believed the improvement if it hadn't been


me. And then, of course, it has enabled me to tell my wife she's
blowing too hard - and prove it' (Sometimes, anyway!)".
I have also found another use for it; by combining it with a pocket
calculator, I can establish the exact pitch of instruments in the
Bate and my own collection, so that for those which I and visitors
have worked on, instead of approximate statements like 'a semitone
below modern pitch', we have exact Hertz figures. Geoff also points
out that although I said that it emits tones over five octaves, it
will measure over seven octaves. He and two other members sent me
xeroxes of the English instructions, and I'm grateful to all of them.
Can I offer anybody a mains unit for one for 110 volts? That's what
came with mine, but I've managed to replace LF~with one for English
voltage, so it's going spare.
ARTIFICIAL IVORY (SEE BULLETIN 24 PAGE 9)
a! No,the fakers of Netsuke's cannot help us with artificial Ivory unless one is copying an
original item exactly. Their process is to take a mould from the original and from it a cast <
is made - the grain colour being added to the surface only .
b) If sufficient interest is shown I can arrange for a manufacturer to produce a batch of
GRAINED IVORY "Acetate" type plastic. This would be the same as that used on better quality
piano keys,but with the advantage that the size of slab/block would be more suitable for
turning.Contact Daniel H Bangham, Woodwind Instrument Repairs, 1 Felton St. Cambridge. Tel.
M702.
Bull.25, p.6: Graham Wells says that a comment of mine there implied
that: you can only buy instruments at auction if you are •«
fortunate enough to actually be in London or New York.
In fact we get commission bids from all over the world,
including Australia. I realise that the one factor
that might deter people from bidding is the inability
to examine the instruments, but I am always very happy
to give a critical condition report either through the
nearest Sotheby office, or if necessary by cable."
JM adds: I'm not sure the extent to which people realise that instru-
ments still turn up in the sale rooms, nor to what extent sale cata-
logues are available overseas. If members are interested, they can
always ask Graham for a sample catalogue, to see what sort of things
turn up (his address is in the Members' List), and the other two
London auction houses, Phillips and Christies, would also-probably
help in this way. There are other places too, of course, but I
think both less often and with fewer instruments than in London.
At least, the only other catalogues I see are the New York ones
which seem only once or twice a year, instead of monthly. Perhaps
some other members can tell us what sales tere are in France, Holland
and so on. However, one point worth remembering is a comment that
Horace Fitzpatrick made in the introduction to a concert here recent-
ly: well made modern reproductions can be nearer to the originals
when they were new than the originals are today. Nobody in the 17th
and 18th centuries was using instruments two or three hundred years
old, and age does affect the sound.
Cojom.368: John Rawson writes:
It seems to me that this conun has done much to confuse the
whole problem of how to diferentiate a Spinet from a Virginal.
The necessity to refer to parts of the instrument that are
not visible, or to very minor differences in the layout is
totally superfluous.
bull. 26,

Whatever you care to call them there are two basically different
layouts - and this comnt does not point them Out. Layout A
has the Bass strings at the back, and the bass keys are therefore
usually longer than €he treble ones. Layout B has the Bass strings
at the front and here the treble keys are longer than the bass
ones.. Most people I think call 'A' a Spinet and layout *B'
a Virginal but certainly this point is open to discussion.
The two layouts however are quite distinct and there can be
no intermediate or vague versions of them.
Bull.373: Paul Hailperin writes: "The painting which Buckland mentions,
'The Cat's Dancing Lesson' is certainly the same as the one I mention
under the Dutch title 'De Dansles' in my Comm.32. As I pointed out
in that Comm, there does exist in the Vienna Collection (Kunsthisto-
risches Museum) an instrument of very remarkably similar appearance.
I 'copied' that instrument for the express purpose of performing
Monteverdi works. Experience confirmed its suitability. The Vienna
instrument also is not dated, but its environment suggests that it E
pre-oboe. In his Comm.272 Buckland goes into pirouettes and lip-
control. In this respect one should consider also the pirouette in
Vienna, KHM (see my measurement in 'Some Technical Remarks on the
Shawm and Baroque Oboe', Schola Cantorum Basiliensis, 1970) (the
Nuremberg pirouettes mentioned in above turn out to be non-original
or not in original state). On the difference between shawm and oboe,
it would be interesting to compare the ratios side-hole diameter/
bore diameter at the same point. Yes I know...I'm one of the people
who, with a little time, could do this."
JM adds: I hope that Paul will find the time, and that others, per-
haps, will do so as well. The division between these instruments
is a very grey area, and not only in Europe.
GRANTS AVAILABLE: The f o l l o w i n g comes from t h e C r a f t s C o u n c i l :
The Crafts Council's Conservation Section w i l l be extending the terms of
reference of i t s grant schemes in 1982 to include help for those e s t a b l i s h i n g
or developing independent conservation workshop'*. Pending the p o s s i b l e
introduction of a loan scheme, a new grant scheme has been introduced.
Applications are, therefore, now i n v i t e d from private workshops needing
financial a s s i s t a n c e , for i n s t a n c e , to help with the purchase of s p e c i a l i s e d
equipment which would s p e c i f i c a l l y contribute to the range of work undertaken.
Tne funds a v a i l a b l e in the current f i n a n c i a l year are limited and i t i s
u n l i k e l y that individual grants in excess of El,500 can be awarded.
FOR FURTHER INFORMATION PLEASE CONTACT THE CONSERVATION SECTION, CRAFTS COUNCIL
12 WATERLOO PLACE, LONDON SW1Y 4AU; Tel. 01-930 4811.

MATERIALS AVAILABLE:
Do you need artificial Ivory ? I have finaly found a Manufacturer who will make a batch of
"BEST GRAINED ARTIFICIAL IVORY" in a size that all instrument makers could use. The plastic
is the same as used on quality piano keys and has until now only been availible in sheet
form. If at all interested please contact me as soon .Daniel H Bangham Woodwind Instrument
Repairs. !• Felton street. Cambridge, tel.64702.
JM adds that Daniel said in his covering letter that the maker will
only produce if there's a minimum order of soemwhere around 100kg,
so it's only practicable if enough members are interested and if they
all react speedily. If responses trickle in slowly, it may not work
out.
bull.26. p. 5
A Couple of offers of WOOD: James Crabtree of 11591 Bridgeport Rd,
Richmond, BC, Canada V6X 1T5 writes: "I am supplying very fine Sitka
Spruce and Red Cedar in the demensions (Sic) required for most popu-
lar instruments including guitar tops, lute, violin wedges, viola,
degambas (sic), basses and harpshichord (sic) and ahrps of all sizes.
All the wood is air dried to 7% humidity and has been quarter sawn.
The production of the instrument blanks is in my control from the log
and its handling to the final pieces to be shipped."
David Owen writes: "Supplies of exotic hardwoods (especially in
smaller quantities) e.g. Boxwood, Ebony, Rosewood, Blackwood, Amar-
anth (Purple heart), Lignum vitae, Satinwood, Indian Laurel, Pan Rosa,
Pan Bruna, Padauk (Indian and Andaman), Bubinga, Cocobolo, Tulipwood.
Also good stock of English hardwoods. Also large range of woodturn-
ing tools and equipment. Available from: Alan Holtham, Woodturner,
The Old Stores Turnery. 51 Wistaston Road, Willaston, Nantwich,
Cheshire; phone Crewe (0270) 67010.
MUSIC AVAIIJIBLE: The 1982 list has arrived from Archivum Musicum,
Studio per Edizione Scelte, 50125 Firenze, Lungarno Guicciardini 9 r,
Italy. It includes a large number of facsimiles of vocal and instr-
umental music, with a special list of flute music and guitar music,
ranging roughly from 1600 to 1750 and costing from about 12,000 lire
upwards.
BOUWERSKONTAKT: As I said 1 was going to, I went over to Holland in
November as a FoMRHI representative at the Bouwerskontaktdag in
Utrecht. I hope that it was useful to Bouwerskontakt; it certainly
was to FoMRHI, as you'll see from the list of new members herewith.
It was a very interesting occasion, with nearly 50 makers exhibiting
and over 4,000 visitors in just the one day, I have written it up
in detail for Early Music because there is one aspect which I think
is very important and which is neglected in this country. Unlike
the recent Early Musical Instrument Exhibition at the Horticultural
Hall, where makers were exhibiting finished instruments to potential
customers, the majority of makers in Utrecht were exhibiting instru-
ments in process of construction, as well as finished ones, and were
showing visitors how they made them; some were actually making on
their stands. There was no sense of rivalry between exhibitors
and visitors; the whole atmosphere was one of experienced colleagues
helping new and aspiring colleagues, and there was a very friendly
feeling throughout the school,where the day took place, and all day
long.
Obviously we need the Exhibitions for makers and customers, but I
think that we also need the contact days for makers and colleagues.
The problem is, who can organise it, here and in other countries?
It is the sort of thing that FoMRHI is for, but who would organise
it? I've not got the time, at least not for a year anyway while
I get lectures and the Bate Collection sorted out, and if it's to
be in London, like most things in this country, it wouldn't be so
easy from Oxford. I'vewondered whether the new National Early Music
Association (see next heading) might be interested, and we'll have
to see whether they would. But who could organise such an event in
USA, Canada, Australia, and so on? I would welcome thoughts on this
from members, and indeed indications from members that they would
take part or would, like John Storrs for keyboards, organise such
events locally, even if like John's sessions, they are for only one
type of instrument. If we want successors, and I assume that most
of us do, this is one of the best ways to encourage them. It's also
one of the best ways of discouraging the fly boys, by showing them
how to do it properly.
aws

K»n.26. P.6

One other aspect of that occasion is worth commenting on: it encour-


aged the cooperation between FoMRHI and Bouwerskontakt. We are wor-
king in very much the same area, and we have a very similar member-
ship, some professionals and some amateurs, some experienced and
some beginners. Several of our members have commented on the trans-
lations of articles* from the Bouwbrief in FoMRHIQ and said how use-
fule they've been. We would like more, if either the authors or
Dutch-speaking FoMRHI members can oblige (do get in touch with the
author through Bouwerskontakt or through the List of Members before
starting to translate, in case there is already someone working on
the same article) and we would encourage them to translate more of
our material for the Bouwbrief, or, since most people in Holland read
English, just to reprint. We both provide an information service,
and the more widely the information is spread the better.
EARLY MUSIC SOCIETIES: A demand from America has come for a network
of US/GB Early music societies, promoters, performers, scholars,
instrument makers, etc. This co»es from Daniel Morgenstern, who is
just starting the Northern Ohio Early Music Society. In fact what
he is asking for does exist, though it has lapsed for a while, but
the Early Music Register is being revived again by Christopher Monk,
as Daniel should know if he reads Early Music. Chris has circulated
everyone he knows of asking them to up-date their entries in the
Register, and there seems to me to be little point in duplicating,
or overlapping, what he is doing.
What there is room for is umbrella organisations, and there is one
tht has just started in this country. This is NEMA, the National
Early Music Association, which was formed at a meeting just too late
to make the last issue. It grew out of the Early Music Conference
Committee that has run several very successful conferences since
the original one at the Festival Hall. The idea is that it should
serve a number of functions: an umbrella for all the smaller organ-
isations and for performing groups and individuals, a pressure
group to try to get more happening and to get money to allow things
to happen, to foster public awareness, to create and expand educati-
onal activities, to lobby press and so on so that we get a fair
share of critical attention at concerts and so on. There is a lot
that can be done. At the moment we're hammering out a constitution
(I say 'we» because I was elected on to the committee at the meeting
which set it up; basically the committee consists of those who were
on the Standing Committee of the EM Conference, plus a few others,
especially those who spoke up at the meeting with some doubts as
to how it should run or what it should cost). It already welcomes
members, although the subscription rate has not been finally fixed;
those of us who joined at the meeting all paid £10 on the basis that
if the rate were higher we would be covered for the £10, and if it
were 1 ower, any excess would be credited towards 1983. If you are
interested, write to Francesea McManus (in the List of Members)
with your cheque etc, made out to NEMA, for £10. It sounds a lot,
but a pressure group of this sort can't work on a shoe-string if
it's going to impress people; there has to be a printed letter
head, not a rubber stamp, and literature has to be printed, not
typed, and so forth. Only then can it impress such organisations
as the DES or the Associated Board enough to make them realise that
Early Music is just as much a part of the musical scene as Modern
Music or a ny other.
And if it is to be really effective, NEMA has got to be able to
speak for all of us — in other words, we've all got to join if
we want our interests to be promoted, if * e want kids to be able to
learn our instruments, if we want our concerts reviewed, and so on
and so forth.
REQUESTS: Reinhard Bachofen has recently bought a double flageolet
and he asks whether anyone knows of a tutor, whether recent or antique
but available, so that he can learn to play it.
Uta Henning saw this picture in an Early Music Shop
advertisement; she asked them for its source and
they referred her to Early Music; nobody there has
recognised it and it is now go ng the rounds of the
likely people. It reached me yesterday and I thought
that I'dput it in here in case any of you can give
Uta the reference.
Olov Gibson would like to know more about the finger technique of
playing the six-stringed medieval lyre, and particularly whether
the left hand also plucks the string or whether it is used to stop
the vibration of strings that have been plucked by the right hand.
If anyone has any ideas on this, they might be of general interest
and thus worth sending me a copy for the next Q. Personally I have
a strong impression that the answer is either or both.
Sam Reiner sr. of 235 10th St, North Wales, PA 1945^, USA, asks
whether anyone has plans for a bass Russian balalaika; even the gen-
eral size, string length and fret locations would be a help. I have
suggested that he write to the Glinka Museum in Moscow, where I rem-
ember seeing one, but I don't know whether he'll ever get an answer;
it's so long since we heard from them that we've stopped sending them
FoMRHIQ — I had no reply to two letters asking whether they still
wanted it.
John Underhill says that "I have basic outline drawings of a number
of lutes but am lacking in detailed information on the shapes of
their backs: I would be very grateful for any such data on original
lute backs - particularly the Gerle (Vienna), Venere 7-course (Bo-
logna), Hieber (Brussels; and Hoffmann (Brussels) lutes".
Paul Grettonis preparing an article for the Northumbrian Pipes Maga-
zine on 'Oiling your Pipes'. He would like to know, and so would I,
whether peanut (Amer. groundnut) oil is still thought of as the best
(ie least likely to dry, etc), and asks "What about Soya or Sunflow-
er?" Some of you will remember the barney I had with Michael Zadro
in the pages of Early Music some years ago; I suggested peanut oil
then because it had been recommended as the best by one of the more
eminent German restorers of woodwind instruments (I didn't name him
then and I'm not going to now because as far as I know he-has never
put the idea into print himself; the suggestion arose in discussion
while rebutting somebody else's suggestion of light liquid paraffin,
which he said that he tried and found disastrous - an instrument
oiled with LLP had cracked into little pieces). Replies both to
Paul and to me, please,and if one of our conservationists would
write a Comm on the latest thoughts on this subject, a number of
people would be very grateful.
Dirk Jacob Hamoen, who runs Bouwerskontakt, has asked whether I
know of any forthcoming courses, etc. He would like to list these
in the Bouwbrief, and if he takes them from the Bulletin here, they
are usually over before the next Bouwbrief appears. So any of you
who are running courses of any sort and who would be happy to have
Dutch colleagues attending them, please send the notices direct to
him at Catharijnesingel 85, 3511 GP Utrecht (it's in the Menbers'
List under Bouwerskontakt) at the same time as you send them to me,
NEWS FROM KIEV: I've had a long letter from Anatoly Zajaruzny about
what is going on in Kiev. Very briefly, he says that interest in
early music is growing in the USSR, with a number of enthusiasts,
>m-M.26. P.8

ensembles and books. Kiev is one of the centres, with himself as a


maker and an ensemble directed by Svjatoslav Czutikov, in which Ana-
toly plays recorders, crumhorns and slide trumpet. They are hoping
to organise a local EM club, which will be the first in the USSR.
Also a first in the USSR, he says, was the construction of a harpsi-
chord, and he asks-me to thank Denzil Wraight and Paul Kemner who
helped him to make this possible by sending him literature and draw-
ings. He has built a one-stop Flemish, a 2x8' + buff Italian, and a
copy of the Marco Jadro 1565 in the Moscow museum. He also asks me
to thank Trevor Robinson for his help with woodwind instruments.
He has been working on the famous frescos in the Cathedral in Kiev
and seems to have found agood deal of information on what was origi-
nally there, beneath the 18th and 19th century over-painting. He
and two colleagues are working on a paper on this, and I hope that
he will send a translation in due course either to us or to GSJ or
Early Music (which wouldbe better than us as they can Illustrate an
article with photos).
He asks whether there is any material on Byzantine secular music.
Can anybody produce any references, or better still send him any
books or music? He would welcome any information on other instru-
ments also; judging from what I've seen and heard, he can turn his
hand to making any instrument, provided that he can get the plans
etc. If you can help him, please do so. It'sbest to send things
by hand, if you can; I sent him some volumes of Early Music, which
arrived safely, but a copy of my Baroque & Classical book didn't
get there.
COURSES: Eric Moulder is running a series of courses on reed-making.
Some have already taken place, and were very successful he says.
There's one on Feb. 13/14 for capped and racket reeds and one on
March 13/14 for shawm and curtal reeds. Each weekend costs £20
including all materials. Space is limited because the workshop is
small, so it's first apply, first served. If you're interested but
can't manage those dates, get in touch withhim anyway and get on his
mailing list for the next series.
Bouwerskontakt have a course on Het kleine orgel, 27/28 February in
the Hague Gemeentemuseum. Cost is Hfl.67.50 .
FORTHCOMING EVENTS: Peter Forrester and Enzo Puzzovio are appearing
on ITV on a programme called 'Bygones' with a hurdy-gurdy that
Peter has made for Enzo. Enzo didn't give me a date but just said
'next spring1 — keep an eye open for it.
I'm in Bridport, Charlton Kings, Wheatstone Hall (Glos) and Dilling-
ton (nr Ilminster) on March 22-25 and would be happy to see any
members living around those parts. And I expect to be touring
Scandinavia with CIMCIM in the middle of June and hope to meet more
of our members in those countries then.
BATE NEWS; By the time you see this, I should at least have every-
thing unpacked and more or less accessible. There'll still be
several months before everything is displayed, but at least it
should all be accessible for measurement and so on.
My own collection should also be more or less unpacked and the house
straight enough that we can offer hospitality to those of you who
are visiting Oxford. I have a home telephone number now: 0865-
726037, but don't use it for FoMRHI queries because all the files
and so on are here at the Faculty.
DEADLINE FOR NEXT ISSUE: Monday, 5th April.
That's it for the moment. Jeremy Montagu
9
Contents of Bouwbrief XXIII. December (sic) 1QR1. Paul Gretton
2.3: Review of The Manufacture of Musical Instruments, ed.Helen
Tullberg and Timothy Davies. """""~"~~"
Review by Marius Lutgerink of The Irish Bap-pipes, their
Construction and Maintenance, by Wilbert Garvin. The review
points out that, although seemingly aimed at the beginning
instrument maker, this book is in fact "more suited to the
experienced builder than the beginner." The drawings are balf-
size, without dimensions being given. One is advised to measure
the drawings directly from the pages of the book. As Marius
points out, any distortion in the printing will be doubled in
the instrument itself. (Translator's note: Garvi^s book
undoubtedly contains a great deal of very useful information,
but a beginner could hardly turn out a set of pipes with its
help alone. Just at some of the trickiest stages, bending the
metal section of the bass drone, for example, one is left to
figure things out for oneself. ("A suitable pipe bender needs to
be constructed for this purpose.") Tuning advice is limited to
reed-adjustment and the use of rushes — there's never any mention
that finger-hole size or undercutting are relevant, and one hears
nothing about beats. There is another very irritating point—
Garvin is clearly indebted in organization, layout and expression
to W.A.Cocks' and J.F.Bryan's pioneering do-it-yourself book: The
Northumbrian Bagpipes (1967, rev.ed.1975)* This is blatently
obvious throughoutfco anyone who has th e two books, but the fore-
runners never get a word of acknowledgement — their work is
only mentioned (without comment) as one of a dozen items in the
bibliography. Is it naive to wonder why?y
5.1: Rembert Weijers recommends the use of waxed polyamide
thread for lapping tenons. Available from leather shops.
5.2.A source for harpsichord and piano parts; Theo de Haas,
Kleine Houtstraat 84, NL-2011 Haarlem, Tel.023-323619. Catalogue.
5,5 Dealer in tools and materials for makers of stringed
instruments: L.Strooker, Einsteinstraat 36, NL-2871 KX Schoon-
hoven, te 1.01823-4-687.
8.1: Jan Dijkstra describes Paul Beekhuiaen's method of making
bagpipe reeds. Applicable to other instruments.
8.2: Jan Bouterse describes the adaptation of a file ('Aven half-
round filemaster") for use in profiling recorder windways. This
is a detailed article with clear diagrams.
9.1: Jan Bouterse goes on to make some useful remarks about
"Recorder-Making: Learning from one's faults." Deals in some
detail with the problem of centring the work-piece.
10.1: Can anyone make or adapt a recorder for an 11 year old
whose left middle three fingers are not fully grown? A few keys
would probably solve the problem. (Might interest someone for
whom there are more important things than authenticity? P.G.)
Cotttact: Mrs Posthuma, Achterwerf 231, Almere-Haven, tel:
03240-13889.
11.2: A performance course "Medieval diatonic plucked psaltery"
is being planned for 1982. The tutor will be Nelly van Ree Bernard.
For information, phone 02502-6162.
Translator's note: If you want copies of any of these articles,
the official FoMRHI procedure is to write to the Hon. Sec.
not to me. And how far is this review of the Bouwbrief really
worth it? Surely very few FoMRHI members read Dutch?/just asking.'^
I don't mind doing it, if there's some point. How many requests *
for copies are in fact received each quarter?
10
FoMRHI Comm. 388
Yet More on Organological Terminology Jeremy Montagu
My first response* to Eph's Comm. 376 is that I owe Eph an apology.
I pulled his leg too hard and it came off in my hand.
My next is that however much I agree with Eph about Hornbostel/
Sachs, and in a number of respects I do agree — there are a
number of inconsistencies, some serious lacunae (often of couBe
of instruments that have been discovered since 1914), and some
serious difficulties in handling various instrument types — ,
it remains both the best system we've got and the only one that
is internationally recognised.
There have been a number of other attempts, both before and
after the appearance of the Hornbostel/Sachs (I and John Burton
perpetrated one; see Ethnomusico1ogy XV:1) but none have been
accepted by the scholarly world. The best explanation of why
they have not proved acceptable, and at the same time the best
description of why the Hornbostel/Sachs should be used, will be
found in the Postscript of Laurence Picken's Folk Musical Inst-
ruments of Turkey.
Reading Laurence's Postscript convinced me a good deal of the
way into abandoning my and John's system; what finished me off
was trying to apply my own system to my own collection. Alright,
you may say that a better system on the same lines (ours was a
binomial system) would have worked, but in fact it wouldn't,
and for the reasons I would refer you to Laurence's Postscript.
I can understand Eph's problems, although they are different
from mine, when dealing with Hornbostel/Sachs, but they're not
insuperable. Even so simple a solution as using different type
(eg LUTE when using it as a class name and lute when referring
to Dowland's instrument) would remove many of his difficulties.
Alternatively, and probably equally easy to someone of mathema-
tical inclination, take advantage of the fact that it is a
numerical system and refer to the 321s or, if being more speci-
fic to the 321.321s, which would separate those with bowl bodies
such as what Eph means by a lute from those with box bodies
(321.322) such as violins and guitars.
If one really wishes to use a proper scientific, intemationaly
recognised system, then it's not difficult to find such an
acceptable solution. What nobody will accept today is a new
system, and particularly they won't accept one with funny names
in dog-Latin. One has to realise that there Ls an accepted sys-
tem and that what we have to do is to make the best of it and
work out ways that will allow us to use it.
11
FoMRHI Comm. 389

Should Museum Instruments be Used? A Response to Comm.380


Jeremy Montagu
There is, of course, an immediate and final reply to Eph's
Comm: Philip Bate gave his collection to Oxford on condition
that it would be used for performance and study.
The question that Eph raises is: was he right to do so?
I believe that he was and that in this immediate instance Eph
is wrong. I say 'in this immediate instance' because on the
whole Eph is right in his arguments. The instruments that have
come down to us are a heritage that it is our duty to pass on
to future generations, and if we're going to muck them about to
make them playable, and then play them, there isn't going to be
a lot to pass on to future generations. Eric Halfpenny had a
comment on this years ago: he said that the only instruments
left, with a few exceptions,were the duds because the good ones
had been played till they fell apart. If we go on playing the
few exceptions, they'll fall apart too.
Now I don't want to imply that what's in the Bate Collection is
a whole batch of duds. What I would say is that there aren't
many really rare instruments, and only a very/unique, and these /few
we do keep a very careful eye on. What there is, is a superb
general survey of the progress of instruments since the mid-18tii
century, and a collection of individual instruments most of
which are duplicated elsewhere. Of course it is a reduction in
human knowledge, in mankind's heritage, when a 2-key oboe vanishes,
but there are plenty more. There are many more Stradivarius
violins than there are Stanesby flutes, but if my own Stanesby,
which I've put in on loan, gets broken while a student plays
it, there are others still (and, like the Strads, my own
Stanesby isn't in original condition).
This is true also of much that we have here. Not many of the
instruments have been chopped like my Stanesby, but they have
all been well used, both in their proper lifetime and subsequen-
tly by Philip and others. I would not say that there is no
evidence still to be garnered from them of the sort that Eph
refers to, but instruments that have been well used profession-
ally in their own time and that have then knocked about the
world, winding up in antique shops, junk shops, auction gall-
eries and so on, cannot be compared with instruments that have
been in a Kunstkabinett (eg Vienna, Kunsthistorisches Museum)
qr in an early collection (eg Brussels, Conservatoire Museum;
or bought more less straight out of the attic where they had
lain since they were last used (eg London, Victoria & Albert
Museum or Leipzig, Karl-Marx-Universitat Musikinstrumenten
Museum, or Ntirnberg and so on). This has to be said of most
modern collections, whether of Philip's generation or of my
own; the instruments we have, have all been used, sometimes
abused, since their own time.
As a result, so long as the great collections are preserved in
safety, there is no reason why our instruments shouldn't be
played. Obviously we do take precautions; we do expect the
instruments to be looked after and we don't lend them to people
about whom we know nothing; we don't even take them out of their
12

case unless we have reason to believe that the customer has a


good reason to want to see or handle the instrument and knows
how to handle it.
We do believe that we have a duty to our immediate successors.
We believe that interest in old instruments, interest in perfor-
ming music on the instruments for which it was written, can
best be fostered by allowing the use of our instruments both
for performance and as models, for measurement and so on, for
the makers of new instruments.
One reason for this is the change in market prices over the past
twenty years. When I first took an interest in playing Mozart's
and Beethoven's horn parts on the instrument they wrote for (this
is where I began in this field), I picked up a hand horn in 1951
for £5, complete set of crooks and all. When I first took an
interest in woodwind, Morley Pegge gave me handful of flutes;
I bought others at 30/- a go (£2.10 for my best one-key flute
seemed an extravagance), John Sothcott sold me a 2-key Milhouse
oboe for a fiver, I bought a 5-key Milhouse clarinet for £8
(again an extravagance, but I found it between rehearsal and con-
cert and blew the fee and the day before's). The trouble is
that a future Bate can't today buy instruments for two concert
fees, and in Philip's time it was even better - he was buying
instruments for half a crown or ten bob.
The only way that the Bates, Segermans, Montagus and whoever
of the future will acquire first the interest and then the
knowledge that we have acquired is by being allowed and indeed
encouraged to use and to study the instruments that we have
collected. So long as there are the great museums preserving
their instruments, we can afford not to dissipate but at least
to risk our own. It is a risk, but for the sake of future
scholarship it's a risk worth taking.

i
u
FoMRHI Comm. 390 _. (See Eull.25, pp. 4 and 5) Paul Gretton
Construction of Ivory Cornetti and Tuning Cornetti at the Sharp End

D Construction of Ivory Cornetti


I'm glad that Bob Marvin has also enjoyed himself at the "Droguerie
Le Lion" and grateful to him for his first-hand comments on the
Metropolitan Museum's ivory cornetto. I only know this particular
instrument from photos, X-rays and drawings. May I make some
comments and ask even more questions? Bob, or someone else, may
know the answers.
Some people have considered the mouthpiece of this instrument
to be non-original on the grounds of its design. The inside rim
diameter is about 13mm, the cup-depth only about 4mm, and the rim
quite sharp. This is not much different, however, from the Vienna
(approx.14mm/4.6mm, sharp) and Offenbach (approx.14.3mm/4mm,sharp)
specimens, and there are similar mouthpieces in other American and
European museums. I have always wondered whether, if some of these
"supposedly original" mouthpieces aren't genuine, who faked them,
when and what did he copy? The general type of mouthpiece used in
the Renaissance and Baroque is becoming increasingly clear, and
Graham Nicholson's forthcoming publication from Basel should clarify
a lot more.
I would like to know more about techniques of softening and
bending ivory — their application to curved ivory cornetti has been
suggested before, and I've even done some nasty experiments with
cow-horns and vinegar. Is the Metropolitan instrument made from
heart-of-the-tusk ivory or is it cut across the grain? How does
one tell this? I don't know much about ivory, but Hermenge's
serpent tutor says that mouthpieces must only be made from heart
ivory.
One thing is certain: like the ivory cornetti in Berlin (ex-
Kanji) and the RCM, the Metropolitan specimen was not made by
boring and reaming a straight piece of ivory, like a cornetto muto
or diritto, and then bending it. (I don't know whether Bob is
actually saying this.) X-rays of all three instruments show that
they were somehow gouged or reamed out when already curved, rather
in the manner of a tonsillectomy! The craftsmanship is breathtaking.
How they were curved in the first place, whether by bending or juat
sawing to that shape, is another matter. Julian Drake paints out
(GSJ XXXIV, p.50) that the bore of the RCM instrument seems to
have circular cross-sections 'with large steps, suggesting a limited
number of inserted, rotating tools. The X-rays of the Berlin
specimen also show irregularities, mainly in the plane of the curve,
as one would expect — it must have been easy enough to keep the
tools, in this plane, but extremely difficult to prevent them
wandering from side to side within it. The more easily accessible
sections of the bore (i.e.: top and bottom) are regular.

Irregularities visible on
X-rays when instrument viewed Much more regular
like this.
<T when viewed from side,

Any further information gratefully received!


2) Tuning Cornetti at the Sharp End
Back to square one I Peter Baldry's supposition that tuning cornetti
to the organ is unauthentic and unnecessary suggests an imperfect
acquaintance with a) even the most familiar early sources, b) surviv-
ing instruments and c) the advanced playing technique of the
instrument. In spite of the existence of "a common local standard
pitch" to which instruments were made, it was still necessary "then",
as it is today, to make further empirical adjustments. Furthermore,
Peter's practical advice to performers is invalid for various
reasons, musical and physiological. A couple of quotations would
suffice to refute him, but I'd like to give more detail than is
strictly needed, in the hope that it may be of general interest
and may clear up a few misconceptions. I hope that my remarks will
be taken in the right New York/Jerusalem, Manchester/Dulwich,
Tweedledum/Tweedledee spirit!

a) SflUECftaj
i) The obvious source, as always, is Praetoriu^. He states
directly (Syntagma Husicum. II* P.35) that one tunes the cornetto
"dergestaldt, dass man oben das Mundstuck welter herausser oder
tieffer hinnein stecke" ("by pulling the mouthpiece further out or
by pushing it further in.") That's to say, players didn't just use
their lips! This statement comes at the end of his chapter on the
recorder, in which he laments the difficulty of tuning to certain
organs "weil ... auch die Orgeln in etzlichen Kirchen, 3o die Kitze
und Kalte leicht treffen kan, im Winter niedriger, im Sofier aber
hoher am Thon befunden werden." ("also because the organs in some
churches, which are susceptible to changes in temperature, are found
to be lower in pitch in winter and higher in summer." p.34) This
difficulty, he says, could even necessitate having two sets of
instruments a semitone apart. He goes on to claim for himself the
invention of two-part tuneable recorders to alleviate the problem
and mentions also that Bassanelli can be tuned in this way. There
then follows the above-quoted passage about the cornetto.
ii) Just as clear and direct is Bartolomeo Bismantova. cornettist
of the Accademia dello Spirito Santo in Ferrara and author of a
Compendlo Musicale (1677), who describes in detail the tuning of a
cornetto to various organ-pitches by means of tuning-bits similar to
those used on early trumpets and trombones, which lengthen the
instrument at both top and bottom. There is even a delightful
illustration showing how such gadgets are to be attached. If the
cornetto has a silver mount, this can be used to extend the sounding
length in the same way. "procurando ancora di sentire prima il tuono
chorista del Organo; 6 altro$ et in caso, che fosse piu alto il
Cornetto del Organo; bisognerft mettervi una 6 piu Giunte; et se fosse
per il contrario piu basso di voce; all'hora bisognera levarne"
(fol.54 recto. "Try first to listen to the tuning note of the organ
or other instrument. If the cornetto is higher in pitch than the
organ it will be necessary to insert one or more tuning bits; if,
on the other hand, it is lower, it will be necessary to remove them,")
Bismantova then describes how a bit for the bottom end^of the instru-
ment should be made and goes on: "e si fa questo; accio slongando il
Cornetto di sopra, e di sotto, le voci tutte; e in spetie 1'acute,*
[my underlining and asterisk] venghino giuste; come l'istesso, si fa
del Flauto; e 1*aviso serva, con iuditio; overo se nel fondo di
detto Cornetto vi saxa per adornamento, la Legatura d'Argento, alta,
e movibile; si potra questa slongarla; che fara l'effetto, che fa
la Giunta.w (fol.55 recto. "This lengthening of the cornetto at the
15
top and bottom ends is in order to get all the notes in tune,
especially the high ones [see below, PGjin the same way as the
recorder is lengthened, QBismantova has previously described a
three-part recorder in g and ho»o to tune it J One should use
common sense in applying this advice. If, however, the cornetto
has a long, movable silver mount at the bottom, one can use this to
lengthen the instrument in the same way as with a tuning-bit.")
Bismantova then goes on to give the most detailed advice we possess
on how to actually play the instrument, but he returns to tuning
problems^at the end of the chapter. "Se per sorte si trovasse
Crgani, 6 Cembali, che fosseroassai bassi del Corista; e che il
Cornetto non si potesse accordare, ne accomodarsi con le voci a
quel Tuono; in ocasione di suonare, Sinfonie, o altro; in questo
caso bisognera accordare il Cornetto una voce piu alta; e poi
suonare, una voce piu bassa; e bisogna saper suonare per tutte le
Chiave; per poter suonare Spostato ne bisogni." (fol.57 verso.
"One may cone across organs or harpsichords which are lower than
choir pitch and it may be impossible to tune or adjust the cornetto
to the mode of the Sinfonie or other pieces one wants to play. In
that case it will be necessary to tune the cornetto a tone higher
and then play a tone lower. One therefore needs to be able to
play in all clefs in order to transpose if necessary.")
Previous to his chapter on the cornetto, Bismantova has already
mentioned two other interesting facts about tuning wind instruments.
Firstly, he suggests the use of wax on the labium as a means of
flattening one-piece recorders, which implies that all Renaissance
recorders, whether one-piece or jointed, were at least potentially
tuneable, contrary to what Peter says, "e se il Flauto fosse / piu
alto del chorista meza voce, 6 meno, 6 piu; e che non si potesse
slongare di. canna; in tal caso, si potrS. mettere un poco di^cera
da una parte della linguetta ben atteso;che cosi s'agiustera."
(fol.50 rec./50ver. "If the recorder is higher than the tuning
pitch when one blows more or less normally and it is not possible
to lengthen it, then you can very carefully put a bit of wax on
one side of the labium, which will solve the problem.") (Such
constriction of the labium is well-known to folk players — it is
the standard method of flattening the old Clarke tin-whistles,
although sellotape has now taken over from wax.) Secondly, Bismantova
is, like Praetorius, aware of the effect the weather has on pitch,
although he describes diametrically opposite changes. "Tempo humido,
f^crescere il Stromento; e il Tempo asciutto, e caldo, lo fa calare
di voce" (fol.52 verso. "Humid weather makes the instrument go
sharp?and hot, dry weather flattens it,") His solution is to pour
a glass of water through the cornetto when playing in the summer!
I have quoted Bismantova at such length because Peter seema to
be unaware of this important source, although it is well-known to
serious players, a facsimile and a translation of the cornetto
and recorder sections having been available since 1978. Bismantova
is the only early source — 1 haven't forgotten Dalla Casa, Mersenne
etc •«•? to give us detailed instructions on aspects of playing
technique other than tonguing, and he stands at the end of the long,
unbroken tradition of cornetto playing in Northern Italy. I see no
reason to think he is describing innovations — it's logical to
assume that his forerunners, not only in Italy, used similar tricks
of the trade, and we can doubtless apply his advice to the Venetian
schooland even earlier periods, as well as to the music of the
Stadtpfeifer later on,

iii) Certainly Trlchet. in his Traite des instruments de mualque


of about 1640 (p.102 — at this point not cribbing from Mersenne).
mentions that ornamental silver mounts were already to be found
on cornetti in France. If Bismantova used them to tune, the
redoubtable iiessrs.Quiclet and Sourin may well have done so too.
16
iv) Mersenne himself (Harmonie Unlverselle. pp.273,276,277) describes
a three-part cornetto which he calls "Basse". He says it is in three
pieces to make it easier to carry around, but he's writing about the
time when various less bulky multi-sectioned instruments were in
any case coming on the scene, and we can perhaps assume that the
three-section construdtion provided also some tuning capability.
Multi-sectioned cornetti are, of course, to be found in several
museums.
We shouldn't forget that the cornetto was not just a Renaissance
instrument. After Mersenne and Bismantova it still had a long
and healthy life ahead of it in Germany, and for much of its existence
it was the contemporary of jointed wind instruments. Peter's
comparison of it with the flutes and recorders of just one period
doesnt stick.
v) Altenburg (Trompeter- und Pauker-Kunst. 1795) is admittedly a
late source, but be is discussing a related instrument and, like
Bismantova, he is summing up the practices of a long and still (just)
flourishing tradition. He lets us know that even if a trumpeter is
only going to play with other trumpets, he still needs at least
some tuning bits to be able to tune to bis colleagues. "Derjenige
Trompeter ... kann ... sich mit etlichen kurzen Setzstucken, zur
Einstimmung bey andern Trompeten behelfen." (p.83. "That trumpeter
can get by with some short tuning-bits to tune with other trumpets.")
For really fine tuning, he Says, it may be necessary to use bits
of paper: "Sollte aber ja die Einstimmung ... nicht vttllig treffen,
so wird man sich leicht mit ganz kurzen Setzstucken oder ein wenig
Papier um das Mundstuck gewickelt. damit letzteres nicht zu tief
hinein falle, zu belfen wissen." (p.86. "If the tuning is still
unsatisfactory, one can easily make use of very short tuning bits
or a bit of paper wrapped round the mouthpiece so that it doesn't
go in too far.") It is clear from Altenburgs comments and their
context in his book, that even if a particular court had adopted
a standard pitch in principle (and perhaps bought its trumpets as
a set from a single Nuremberg maker), one might still have to make
slight adjustments. With "lip-vibrated aerophones" this was
usually done by means of mouthpiece positioning. (Perhaps I'd
better add that I'm not suggesting that the trumpet is a3 flexible
in pitch as the cornetto, nor that one should play the two
instruments in a similar manner!)
b) Surviving Instruments:
The two beautiful cornetti in the library of Christ Church,
Oxford, (bought 1605) are provided with removable silver mounts
which serve to lengthen the instruments by about 7 or 8mm at the
mouthpiece end, lowering the pitch considerably. (See the same
article by Julian Drake in GSJ XXXIV, p.45 for a sketch of how
they do so.) It is not known at what date they were added, and they
may have been intended to effect a permanent lowering of pitch
rather than provide an alternative. In either case, they again
show that the answer wasn't always in the lips — their effect is
the equivalent of pulling out the mouthpiece by the same distance.
(Two instruments in the St.Annen museum in Lilbeck have indeed
been permanently lengthened at the bottom end and the fingerholes
altered to allow for playing at a different pitch.)

The above is the historical evidence — from four different


countries — on which i based my statement,that you can and should
tune cornetti by means of mouthpiece-positioning. There is also
the evidence of personal playing experience, mine and others'.

I

17

c) Playing Technique.
Of course every comettoplayer knows what Peter tells us in
such a revelatory manner: the pitch of a given note is flexible
and one can "pull" or "lip" notes up and down. However, if one
goes beyond his "bit of practice" and does a great deal of
practice, various other phenomena make themselves felt. It
becomes apparent that each tone has a "centre" or point of
optimum/maximum resonance at which it sounds and projects best.
(This is even true of the serpent, by the way.) The process of
learning to sound the instrument is one of learning to find these
tonal "centres" by instinct. There is some leeway, but if one
frequently plays at non-central pitches one will never get the
best sound. The difference between a good and a bad instrument,
other factors being equal, is that on the former a greater number
of these centred notes is in tune with one's chosen pitch and
temperament. It is this set of centred notes which one has to
tune to the organ or whatever, and one does it by adjusting the
length of the sounding air-column. I'm not trying to be sarcastic,
but all this is surely obvious and applies, sometimes more and
sometimes less, to all wind instruments. Of course, there is
never a perfect instrument — one always has to lip at least some
notes into tune. Playing in tune is not just a matter of producing
a note of the required pitch anyoldhow but of doing so with the
best possible sound. If one tries to do everything with the lips,
the sound, instead of being "open" and "free", will be "tight" and
"strained" when playing higher than the instrument's intrinsic pitch
and "fuzzy" and "not projected" when playing lower — all very
subjective adjectives, but valid.
In fact the flexibility Peter describes is dependent on other
factors besides lip-tension. For example, it is very much less with
a small ("authentic"??) acorn-cup mouthpiece than with an adapted
trumpet mouthpiece. Indeed, tuning at the sharp end must have been
a necessary provision for the use of various mouthpieces and
various players. If you bought a set of cornetti in Venice for use
in Munich, you had to be sure that Hans, Fritz and Seppl, with
their own personal lips, lungs and mouthpieces, would be in tune.
They must have"bothered to move" their mouthpieces. Just as
significantly, pitch-flexibility varies very much from register to
register of the instrument. Thus it may well be possible to lip
the lowest notes through as much as an octave, but the high notes —
according to Bismantova a characteristic of the cornetto -- are
much more stable and less susceptible to alteration with the lips
alone. Try playing Pezel, or the "Deposuit" from the Monteverdi
Vespers, or a scale from g below the stave to the g three octaves
higher — all on a 440Hz cornetto with say, a 450Hz organ. After
about top a one will be much too flat, and some notes will skip to
the next harmonic. There is, quite simply, a limit to what one can
do with the lips alone. This lack of pitch-flexibility on the higk
notes~Is specifically recognized by Bismantova in the passage I
have marked • — he implies what practical experience shows: one
should tune to a less-flexible high note, blowing quite strongly.
Tuning to a note in the lower octave may be deceptive. The instrument
needs to be capable of sharpening as well as flattening.** Leaps over
large intervals will also show up an instrument whose intrinsic
scale is out of tune with the accompaniment — one tends to hit
these "real" notes even if one is trying to play "de-centred."
For the above reasons one has to be extremely careful when
assigning pitches to museum instruments. Some research is way
off centre, including a recently published book.
Perhaps I should anticipate the objection that the cornetto
muto was of fixed length and couldn't be tuned? I won't dispute
the probability that players had numerous instruments available —
inventories show it. On the other hand, the muto seems to have
been used mostly in chamber ensembles of quieter instruments, which
would have tuned to it in the same way as a modern ensemble tunes
to whichever fixed-pitch instrument is being used. With strings,
reeds, trombones, and even harpsichords this will have presented
ho problem.
In conclusion — tuning the cornetto to the organ was and is a
natural, necessary, and obvious thing to do. (I personally don't
know any serious player who doesn't do it.) "Then" as now, there
was a need to accommodate the instrument to such unforseeable factors
as : varation in supposedly identical instruments, the state of
one's embouchure, fatigue, the weather (which doesn't affect all
instruments in the same way), heating etc, etc, etc. Neither
player ncr instrument is at 440 all the time.
p.s**I know that there are sharp as well as flat organs. Indeed,
my own experience (statistically invalid, of course) is that they
are usually sharp. Furthermore, I have had to play with orchestras
that tuned to about 444-Hz as a matter of course and were surprised
at protests. So one up to P.B.i
p.p.s. Recorders and flutes were not the only other Renaissance
wind instruments. The cornetto is better comparable with those
which obviously could be tuned — reeds and trombones, for example,
p.p.p.s. I didn't suggest "enlarging tuning holes on some reed
instruments." My only mention of reed instruments was to point out
that there has to be a good fit between reed and instrument, in the
same way as between mouthpiece and cornetto. However,I wonder if
Peter has ever actually taken a look at the reed-sockets of original
oboes, bagpipes, crumhorns, etc ? They aren't cylindrical, but
they are aaaarrggghhh! 11

Bibliography
AjLtenburg. Johann Ernst: Versuch einer Anleitung zur heroisch-
miisikalischen Trompeter^ und Pauker-Kunst, Halle 1795.
Bismantova, Bartolomeo: Compendio Musicale, 1677. Facsimile, Archivum
Musicum, Collana di Testi Rari, Florence 1978.
(Bismantova), "The Discussion of Wind ^Instruments in Bartolomeo
Bismantova's Compendio Musicale (1677)": translation and commentary
by Bruce Dickey, Petra Leonards and Edward H.Tarr, in Easier
Jahrbuch fOr Historische Musikpraxjs. II, 1978, pp.143-187.
Drago.Giuliano Q.. detto Dalla Roccia Alta Coronata di Neve: Delle
jjBperfettione del'automobile nuoyo (sic), Venezia, 1 6 — ?,
Facsimile, Forni, forthcoming, ed.J.Leguy.
Drake. Julian: "The Christ Church Cornetts, and the Ivory Cornett in
the Royal College of Music, London" in GSJ XXXIV, 1981, pp.44-50.
Mersenne, Marin, Harmonie Universelle. Paris 1636, Facsim.ed.F.Lesure,
Paris, T963.
Praetorius. Mick:Syntagma Musicum, Wolffenbtittel, 1619. facsimile,
Barenreiter, Kassel, 1958.
PythoniS,Montis Acuti paene Hierosolymitani Jeremiae atque Segerhominis
Ephraimi Novi quondam Eburacensii: Pythonis Montii Liber Haximus
Ultimusque Semel Musicae Antiouae Instrumentorum Omnium, Oppido
I'Ovo Abbatis
Trichet, impressus
P.: Traite desI'iCHLXXAlV
instruments(sicJ, ed.Jacques
de Husique. and Sylyette
ca.1640, ed iKleSufe*'
19

FoMRHI Comm. 391 Brass Cary Karp

The problem with cracked and crazed brass instruments mentioned


in bull. 25, p.8 is a manifestation of two of the several effects
of localised corrosion, i.e. loss of metal from a small area of
a surface which is otherwise relatively unaffected.

The first effect is intergranular corrosion which is caused by


differences in electric potential between the material in the
individual grains of the alloy and the thin boundary layers
between these grains. Corrosion occurs when current flows between
the areas of differing potential. Affected areas appear "crazed"
as the individual grains become prominent due to the deterioration
of their boundaries. In the worst case entire grains may become
totally dislodged. Susceptibility to intergranular corrosion can
be related to the size and pattern of the grains which in turn are
highly dependent on the cold working and heat treatment histories
of the metal and the environmental conditions to which it has been
exposed.

The second effect is stress corrosion cracking which occurs under


the combined action of applied or residual tensile st ress and some
corroding agent or effects of aging. Cracks occur in effected areas,
Susceptibility to this type of Corrosion is also depe ndent on the
cold working history of the metal and environmental c onditions. The
first type of stress corrosion cracking which concern ed metallurgists
(and the invariable textbook example of the problem) was that noticed
in a-brass cartridge cases stored in 8mmonia rich env ironments.
The problem occurred frequently in the tropics during the monsoon
season, hence the name "season" cracking which has si nee been applied
to all ammonia induced stress corrosion cracking.

The propensity for both intergranular corrosion 8nd stress corrosion


cracking can substantially be reduced by annealing which has there-
fore become a standard industrial preventive treatment. Annealing,
however, will not and cannot under any circumstances eradicate the
effects of corrosive damage which has already occurred and is thus
not a "cure" for cracked or crazed instruments. (How in the name of
reason can metal which has corroded away be expected to reappear by
the application of 300°C for 20 minutes??? Has the ICCSON suggestion
really been related accurately?)

Anyon e who has brass instruments which do not show any signs of
these prob lems could probably reduce the likelihood of their later
maoif estin g th emselves by low temperature annealing. Ignoring the
probl ems o f de soldering and resoldering the instrument before and
after trea tmen t it must br realized that brass instrument makers
go to a gr eat deal of trouble to cold work their material to extreme
hardn ess f or w hat are regarded as important musical reasons (see
bull. 25,p. 9 under Medieval Technology). Annealing to lower the risk
of so me ty pes of localised corrosion would quite likely ruin the
music al va lue of any brass instrument. Basset horn bells, aside from
the d estru ctio n of any lacquer with which their insides might be
coate d, ar e pr obably less critical in this regard.
20 CK 2

The amount of material which would have to be sacrificed to provide


experimental results of real use in determining the priorities
would surely be unthinkably large. How, in any case, does one
determine experimentally what will happen to a given object at
some time in the future?

There are other preventive measures which can reduce the risk of
localised corrosion without jeopardising the material or musical
integrity of an instrument. These consist of cleaning the metal to
remove corrosive and electrolytic material, its stabilization to
reduce the likelihood of renewed destructive activity, and providing
some protective barrier between the metal and deleterious environ-
mental elements. The specific techniques are quite straightforward
BUT the choice of procedure must be based upon accurate knowledge
of both the exact type of alloy being treated (a generic term such
as "brass" is far too nonspecific) and the type(s) of corrosion
against which protection is desired. Otherwise the treatment can
cause new problems easily as serious as those it was intended to
avoid. Access to the necessary analytical facilities (very few
museums have them) implies access to the expertice necessary to
deal with the further details of the matter. Otherwise as long as
brasses are not polished problems can often be avoided. Most com-
mercial polishes contain ammonia which will etch out the grain
boundaries in brass and thus weaken it as well as leaving more
space between the grains to trap electrolytic and corrosive material.
Exposure to ammonia in itself is enough to trigger stress corrosion
cracking. Commercial polishes can also contain electrolytes which $k
can "charge" incipient galvanic cells in the uncleaned brass and
initiate intergranular corrosion. The weakened brass will more
easily stress corrosion crack. Safe polishes can easily be formu-
lated, but all polishing removes metal from the instrument so if
polishing is regarded as necessary the instrument will require
subsequent protection from conditions which will cause a need for
renewed polishing. (The practice of repeated cleaning with unsuitable
polishes is, in my experience, the most common cause of the basic
problem in the first place.)

What to do if localise d corrosion has al ready o ccurred? Metal


which is gone is gone, It is possi ble to specul ate on s ome fantastic
(literally) microweldi ng technique which can be used to seal cracks
without substantially effecting ad jascen t metal , but no such tech-
nique is available to us. Even if it wer e, loca lised co rrosion tend?
to occur in somewhat 1 arqer areas of uns table m atnrial so closing
individual cracks woul dn t provide that much h el p. Obv iously,
problem instruments sh ould be clea ned, s tabiliz ed and p rotected
remembering, however, the problems discu ssed ab ove. If the diffi-
culties are the result s of materia 1 aging this treatmen t won't
help much either. Bras s repairers will p atch a crack wi th new
metal which provides a good soluti on to the mec hanical problem but
may be of questionable value where conse rvation in a st ricter museal
sense is desired.

If these comments are not felt to provide enough useful information


it must be realized, however reluctantly, that the musical instru-
ments which interest us so intensely have finite lifespans and that
we will not be able to avoid seeing some of them reach the end of
their days* It would seem more reasonable to expend energy preser-
ving the material which still survives than on a search for a
"cure" for material which has disintegrated.
21
Fo M R H I C o m m 392

A Method of casting harpsichord roi« ( . John Paul

Vhon I firet came to make "7 rose* in metal, I found


that sand casting «»•• an Insufficiently fine and dotallod
finish, and I did not like the look of casting* la the
traditional load alloys. For thoos reason* I workod out
a version of th* method of catting using what Is known as
• valve mould. It would really bo hotter to call it a
"bi-valve Mould" bocaue* the mould is in tiro shell - lik*
helves llko an oyster. It 1* a version of gravity die
casting and givee results of similar quality.
The metal I US* 1* sine which i* available in a number
of commercial alloys such as th* Kazak range, designed for
dts casting. Anyone wanting to do son* first trials will
find that carburettor bodies from a ear breaker will be
•ultable; th*** are nearly always of floe. Zino has th*
advantage that it is a hard metal, which will buff and take
a high polish, but it le also poesible to carv* it, •• that
th* casting can be cleaned up easily. It will plat* if
required - I usually gold plat* sry roses. The Belting
temperature is low, *20 C for the pur* metal. It can be
•elted easily in a plumber's lsdle over a gas torch, while
Small quantities can be reel ted on a kitchen (as stove.
On* must start by making a waster pattern in two stages
as follow*. First, turn in the lath* a piece of wood
(booch 1* ideal), thick enough to go in th* ehuok and at
least on lnoh larger across th* fees than th* rose is to bo.
Turn the face flat, and than turn away sufficient wood to
leave a ring proud on the surface. This ring Should be
3/16 inch proud, shout ±/k inch wide, and a suitable outside
diameter would be between 2\ and 3 inches. The sides must
slope and net be vertical. The wood block should be turned
to a diameter 1 inch larger than the ring, and when this is
done, rubbed smooth with glasspaper and renewed from the
lathe. Polish with Preach polish and beeswax or beeswax
alone. The area inside the ring is to contain the rose
pattern and, to make this, fill th* area with plasticine or
casting wax and carve the required image in this. very
Importantt all cuts must have sloping sides with ne under-
cute. The advantage of using materials of this kind is
that any mistake can easily be rectified and th* image can
be gone over until it is satisfactory. ¥h*n it is
satisfactory, wrap a strip of tinfoil round the block se
that it is at least half an lnoh high all round, and pour
Into this sufficient polyester plaeti* to fill. Th* plastic
should have in it the manufacturer recommended hardener and
catalyst and a small amount of inert filler and colour, then
Set, this is a female mould ot the rose and can be used for
casting plastic rosee. (Go no further if this is what you
want). Coat the mould with a proper release agent or
wax it. I have found beeswax, furniture polish or shoe
polish to be suitable. The mould is placed flat on the
bench and filled with polyester, again with a little filler
and colour in it. Work the liquid plastic into the detail
with a fine paint brush. This is to be the master pattern
and it must be carefully carved over to sharpen the detail
22

and then put in the lathe and the back turned flat until
it is of the required finished thickness. The way to
fix it in the lathe is to chuck a piece of wood, turn the
face of this flat and then turn a depression into which
the roee will exactly fit. The rose is then screwed to
this plsoe of wood. Do not uss wood turning techniques
on plastio but turn as for brass.
Mow comes the mounting of the master pattern. Take two
pieces of half inch or threequartor ply, each about k inches
by 5*f for a 2? inch rose and face them with a polished
plastic surface - Formica is suitable. On one, the
plastic master pattern le glued with epoxy glue, •} inch up
from the bottom. On the other, the pattern for the filler
cup must be formed. This must bo ohapsd like a very
rounded triangle. 2 inches wide at the top and about f
inch thick, tapering down to nothing. It is fixed with
the wide end flush with the top of the block, and must be
long enough to come down to a t inch lower than the top
of the rose pattern when the two blocks are faced up. In
the mould, this forms ths feed for the molten metal. It
le important that it should be large, especially at the
top, as it acts as a runnel. Ths weight of molten metal
in the feed cup also provides pressure to push the metal
into the datail of the casting. Make ths male shape in
wood and copy it in plastic through either a plastic or
plastsr intermediate mould. Plx with epoxy to the second
block. Just as with thy roee pattern. When all this is
done, there will be two matching master patterns, one for
the roee, one for the filler cup, which will last
indefinitely. Proa theos the two casting shell moulds
are made.
Cut up a number of pieces of 3mm or 4mm ply and screw
thess to the sidss of the pattern plates, in such s way
that each becomes a shallow, open box, 1 inch deep. Into
thess ths aould material is poured. The mould material is
a sand/cement mixture, one part Portland cement to one part
fine silica eandj. This sand is available from pottery 4f£^,
suppliere but the stuff sold in pot shops as fins silver*""
sand appears to be tho same thing. It is important to
ensure that no air bubbles are entrapped to mar the surface,
by repeated tapping. It is a good idea to reinforce the
grout with asbestos string or the special concrete quality
glass fibre. Allow to set for seven to ten daye before
removing the aould from the pattern, and then leave to
cure for ssvsral weeks. In the meantime, more roee moulds
can be aade and perhaps a spars feed aould.
When the time comes to cast, bake the moulds in a
domestic oven for an hour to dry thoroughly and then give
then a further heating with a gas torch. Wear protective
clothing, gloves and goggles. Fit the two halves of the
mould together with 0 - cramps; they must fit smoothly
face to face so that no molten metal escapes. This needs
to bs checked earlier and the faces rubbed down if
necessary. Melt up to half a pound of zinc in a plumber's
ladle, using a gas torch or a large gas burner, and when it
is molten, skim off any dross with a piece of wood and pour
ths molten metal into the closed mould. It is best to have
the mould at an angle to the vertical and to pour with a
23

steady stream, holding back any dress with a stick. As


soon aa the metal has chilled, part the mould and renews
the casting carefully. A new casting can be mads
immediately if the mould is undamaged - I get anything
from one to six perfect ro»»m from a aould, and it seems
to be largely chance how long a mould lasts. The us*
of an aerosol foundry releass agent prolongs mould life.
I usually have several moulds ready when casting, so that
I can cast at least a dosen at a time. The food part
of the coating 1* *awn off for remelting, and the rose
cleaned, detail engraved over as necessary, and polished.
It is possibls to have an iron mould cast at a
foundry from the master pattern and this will last far
hundreds of castings. I have also made permanent moulds
from aluminium| not so far for rose casting, but this is
a method I am trying out now and I will report in due
course if it works.
I shall be heppy to demonstrats this system to
anyon* who care* to visit me.
24

FoMRHI COMM. 393 JOHN BARNES


KEYBOARD RESTORATION
David 0. Jones has expressed an interest in the two restoration
reports which comprised ay Comm. 366 but says it would be more
interesting to know what I would do with a square piano retaining
only one hammer, three dampers and a few strings. The answer is:
be thankful that you have some evidence of what the hammers,
dampers and strings were like (assuming they are original) and make
a "hammer strip" tapered from bass to treble and complete with a
continuous strip of leather hinge. This should be out into separate
hammers, each of which has s separate wrapping of (usually) two
kinds of leather. With a grand, the hammer strip can be covered
with hammer leather before cutting into separate hammers. Dampers
can usually be made in strip form, often with damper cloth attached
before cutting apart. I expect this is what Mr. Jones is now
doing on his current restoration.
The philosophy of this is that anything missing should be made
new (not cannibalised from other old pianos) as accurately like the
original ae possible• New work should be identified discreetly
(e.g. stamped with the year) but it may be coloured to blend in with
the old parts. Thus a casual inspection reveals an instrument whole
and in good condition, but a fuller inspection can distinguish the
old and the new.
The repair of damage is, I think, best aimed at removing signs
of abuse as far as possible, but not attempting to disguise the
legitimate history of the instrument, including patina and wear
patterns. If an instrument is badly damaged or has many parts
missing it may be uneconomic to restore, but that is a separate
question and depends on its rarity.
Mr. Jones was curious about my technique of separating the
outer hammer layer from the inside ones. It usually changes the
sound a little, though I would always try one hammer first to check
that the sound is improved. Undoubtedly the layers were originally
in contact but not adhering to each other over the part which hits
the string, though the layers would originally have been tighter
than one finds in an old instrument. I expect my treatment for
separating the layers would last at least twenty years, but it can
be repeated as often as necessary. One cannot expect to restore
an instrument so that it needs less maintenance than it did when
new, and one is entitled to expect that the user will provide a
good environment. In fact, a restorer should enquire about
maintenance and conservational prospects before accepting a
commission.

My green woollen cloth was bought from a local department store,


now closed. It was a Shetland worsted 1.1 mm thick, but most
worsteds are probably suitable. It had a strong direction and a
yielding direction, like the old cloth. Stores of the House of
Fraser group may be able to supply aotaething suitable.
V

25

I never replied to John Rawson who asked "Is restoration


doomed?" in Comm. 268, arising from my article in "Early Music"
April 1980. He ends: "Logic leade to . . . the replacement of
the restorer by the replioa-maker. But where does this leave
people who want to know what the original instruments sounded
like?"

I was arguing, amongst other things, that before a restoration


is decided upon there should be two stages of discussion: (1) on
the best procedure assuming the instrument is to be restored (2)
on the advantages and disadvantages of the best restorations!
procedure compared with other options including conserving but
not restoring the original and building a copy from scratch.

The restoration option may be right for a particular instrument


in particular conditions. Restoration is not doomed, but its
implications ought to be scrutinised before action is taken, and
it should never be assumed that it ia obligatory.
49
About restoration reoortr. for forteolono'; Jon Hermans
(further to Corn 36ft) FoMRHI C o m m 394
I'd like to comment on the restoration reoorts by "c John Barnes.
First of oil, I think these reoorts are qood specimen to be
handed over to the customer (oho'It be Interested only In what's
neen done or to ,<what extent the plono needed restorlnq). !'y own
restorotlon reoorts aren't different fron "r n a m e s ' s. Hut the
members of FoMRHI need -I nuess- o nore detailed kind of descrip-
tion of the methods used. F.l. Lt wouldn't be enough to s o that
the damper reolsterft-osstralohtened, but to tell then exoctU'
how It wos done! Of course, one could or^ue like I'.r Frledenann
Hell'jjln (the curator of the Nfjrnbero Museum) , who totd ne once
that If one alves bits of Information on nethods then any lau-
man mill start restorlno and a lot of beautiful Instruments nloht
or shaLl InevLtablu come to (irreversible) harm. At the other
hand, he also sous, that anuone nho r-eolln Is detemLned to Learn
to restore needs a Lot of tonnlble Information. So ^Ive It to hln
ond he mlnht or FIQU avoid dolno hoVn to Instruments. There are
orouments In favour of both points of view. I don't know muself
which attitude I should take. If one fovours the first opinion
FoMRHI has consequently not to channe Its none and become FoMHl,
In that case I'm afraid a rather formal Qttltude should be adop-
ted (bu whom?). Unfortunately, It's true that a lot of darnaqe 1$
done bu oeoole who don't knoi': what then ore dolno. The following
lllustrotes this quite clearlu: someone wants to clean an old
polntlnq (a portrait) which has become dirty over the years,
reads somethlno about the subject, decides to do the job himself
and where does he start cleanLnn... rlnhfc In the middle of the
face! Don't osk about the consequences In this particular Instance,
t'ost people simply haven't not enounh patience to wait tLLL then
are oulte sure about thlnos! If that were so, there would be no
oroblens. A future restorer mould wolr until he's mothered enough
reLlable Information (throuoh personal contacts, thorough studu-
Inn, courses, aoprentlceshlp etc... ond nerseverance!). One nloht
also aroue that It Isn't oulte simple to stort a restoration
uiorkshop (nu InltloL outset costs mounted to about 5600£ the crlce
of onu Instruments not Included), so that not many peopLe will
start restorlno (eso. not If theu onLn want to own one Instrument
Ln qood pLatjln^ order). It wouLdn't he worth the rone^ or toe
trouble. So far as this 'Introduction' Is concerned. I'd Ll'-e now
to sau something about the reports naraorooh after oaraoraoh:

-As o motter of course I (nearLn) always re.olace the old strlnos


bu nei'i ones. Of course I do return the old strings luLth the re-
stored Instrument (Ln view of reverslbllLtu and documentation).
In my experience oLd strlnos (over 150 uears or more) have Lost
their resilience ond their tone-qualities. If onlu some strlnos
ore repLaced, the new ones won't oLve a oood tonoL match nLth the
old. At least I hear the difference. One can never be cults sure
how manu ond which strlnos hove already been renewed. TT tfhe
soundboard shoris (open exoonslon) cracks or If It's vent dlrtn, Lf
ports of the varnish have dlsapoeored or Lf the brldne hes becone
unnLued, one usuolLu has not to remove the strlnos onuwou In order
to do o oroper job. Veru rarelu one finds a olono which onLn noedr-
the dust to he blo:m of ond thot's that... I shrink ot ollln^ Iron
or brass (on the continent we call It messlno) wire (not sneaking
of nut). I 'n afraid that onu oil would further rustlnq Ln future.
MB Llstlna tope must he I nuess a synonyn for the 'continental'
strlnalno hrold or felt.

-"The modern back-touch strip IOS removed ac- It wos harder toon tl
orloLnol two Loners of woollen cloth,
be Interested In sne^ thlnos no a detailed description of the quo-
Lltles of oil sorts of cloth, ;~elt etc... and where to qet these.
Levelllno the kens (and other common action reoulotlno jobs) doesn't
noor1 on" exoLonatlon 'couoe toet should be a familiar procedure.
5 co tue leod ken welohts I refer to a previous article about the
subject. Llohtln hanmerlno them Is the best method If theu aren't
too heavLli! corroded.

-"Most of toe banners were too tloht to foLL under their own welqht."
I hoven't exoerlenced such a feature up tlLL now, but very often
the ooooslte. In oractlcolln 60-' of the pianos I restored the bushlnq
the hammers had torn out exceslvelu. In that case the actions
renew the bushings,

- T oe method of softenlnn the outer compacted Layer of the honner


coverings by Lnsertlno o steel U-shope wire Is sonethlno quite new
to me. I must try It out once. I wonder If Mr 3arnes could give ne
••,orn details on the correct orocedure? If the hammer shanks are
whoroed I always use an electrLc shank bender (which Is veru reliable
becouse there's no danger of overheotlno the shanks In any way. I
always reoloce ami broken shanks (pechaps here I sin aqaLnst rever-
slblLltu).

-The next oaraorooh could be somewhat unclear to some people, esp.


If their native tonoue Isn't English. After aLL there are so many
different sorts of actions etc... The followlno drawing opplles
to the orobLems discussed In this paragraph:

fc"1 .&£
\jj-j" if
±rr ^Wr^\\\\\\\\v\\\\wvT\V
ftp^-i-

=?
* *1
•H •W-X AaA-^U k*J 1~~>.-
°&
A^aln the Information would be nore useful Lf the reader were toLd
how the domoer reolster was stralohtened.

-The sooe remark apoLLes also for the followlno paraaraphs: how wos
the domoer cloth put Ln the required shaoe aqoln? V/hat kind of
Leather isos oLued to the notched port of some dampers? Exactly how
was the piece of mlsslno veneer replaced, the set-off of the hammers
ad iusted etc .. . ?
As a final conclusion (In the Lloht of the Introduction) we must see
to It that we olve verii concrete and tonglble Information. Perhaps
In future oil restoratlo n peopLe (whether me are talking about
kenboards or other Lnstr uments) should start a discussion on methods
snsthenotlcolln: I.e. mo ke o list of oil thlnqs that can be wronq Ln
Instruments ond the best won to cope with Lt.
FoMRHI Comm. 395

Construction of Viol Bellies by Bending all Staves


„ by E p h r a i m Segerman and John Duncalf

It is r e m a r k a b l y easy. Worked like a t r e a t first t i m e . And


being a lute m a k e r helps. Conceptually our method is as follows:
1. Make a standard bulkhead-type of mold like for lute backs (see Comm
267). The shapes of the bulkhead tops a r e the c r o s s - a r c h i n g c u r v e s of
the under side of the belly and the b a s e - b o a r d has the belly outline.
2. Saw the mold (bulkheads and all) into five s t r i p s . The saw cuts a r e
p e r p e n d i c u l a r to the b a s e - b o a r d and along the l i n e s of the stave joins.
3. On each bulkhead section of each s t r i p , draw the highest straight line
that goes all the way a c r o s s while staying within the section. Cut the top
of the section off along that line. Note the maximum t h i c k n e s s amongst
the pieces cut off for each s t r i p . This t h i c k n e s s plus the final t h i c k n e s s
of the finished belly t h e r e is the minimum t h i c k n e s s of s p r u c e board
needed at that point for that stave of the belly. We found that this did not
exceed twice the final t h i c k n e s s .
4. P l a n e , cut and heat-bend s p r u c e b o a r d s to fit onto the tops of the
bulkhead sections for each s t r i p .
5. Clamp each s p r u c e board to its s t r i p at those bulkhead sections
needed to e n s u r e that the board s i t s snugly on each section. Shoot the
edges with a t r y plane.
6. With the above c l a m p s still in place, glue the s t a v e s together by
clamping the s t r i p s together.
7. When the glue is dry, leave enough c l a m p s on all the t i m e to keep the
belly snug onto the mold while shaping the belly top surface in the t r a d -
itional way, following arching t e m p l a t e s .
8. Remove belly from mold and shape inside to final thicknessing.
9. If r e s i d u a l s t r e s s r e m a i n s distorting the belly with m o r e force than
c a n be held by glueing to the s i d e s , r e s h a p e belly by local bending using a
bending iron, (try to avoid the stave joins; linen s t r i p s glued over the
joins inside and out can avoid their opening up). T h i s step is conjectural
since we have not yet needed such reshaping.
We actually didn't do it p r e c i s e l y t h i s way. We designed the
bulkhead sections with t h e i r straight tops beforehand and built each s t r i p
independently. Though t h i s design is readily done with pencil and paper
s t a r t i n g with the a r c h i n g c u r v e s and belly thicknessing, we actually did it
with a m i c r o c o m p u t e r that happened to be available. The p r o g r a m m e was
w r i t t e n a s part of a suite for plotting out g e o m e t r i c a l a n a l y s e s (see Comm
5) and t h e o r e t i c a l a r c h i n g c u r v e s .

F o r background to the English p r a c t i c e of constructing viol


b e l l i e s in bent s t a v e s , see Comm 289. Incidentally, it may not be a
coincidence that o r p h a r i o n and bandora backs (see Comm 16) a r e easily
m a d e t h i s way a s well.
29
INDEX 1981

Numbers after entry refer to Quarterly,page or if prefixed by C,the


Communication number. (R) refers to a book review.

Aeolian Hall 25,5. Early Music-Border Marches E.M.


America-Guild of A. Luthiers Forum 25,5
2*+,? -E.M. Society of Victoria 25,6
Archaeology-Nautical 22,6 -E.M. Standing Committee 22,5
-Instruments from Ship- Exhibitions-Boston 22,6;23,10
wrecks etc C317 -Heme 24,6
Archlute 22,4;22,36 -Importing Instruments C345
Australian Association of -London 22,6;23,10;24,6
Instrument Makers 24,7 Fingerholes-Undercutting Measuring
Bagpipes 22,3*24,7*24,8 Device C333
-Convention 25,4 Flauto D'Echo C328;25,4;25,9
-Fingering Gaita Gallega C355 Flute-Embouchure Hole C327
-Valves and Mouthpieces C358 -Renaissance F. Design C369
Belly eee Soundboard Gesso 24,4;C374
Bending 22,3*23,5 Gittern 22,5
Bentsides 22,3;C356 Glue 24,5;25,3
Books-Suppliers 24,12 -Cheese 25,4;2^,4;C3?4
Bows 25,9 -Hide,Waterproofing 22,3;23,3
-Thickness of Tourte C379 C339;24,3;25,3
Brass-Annealing 25,4 Guitar-Baroque CJ19
-Cracking 25,8 Harp 23,8
Browning Harpsichord Pins C367 -Aeolian 24,9
Cane 22,9 -Folk 23,6
Carnyx 22,15 -Strings 22,14;23,6;25,3
Cases 24,10-25,11 Harpers 25,3
Casein C374 Harpsichord-Bentside6 22,3
Catalogues 24,3 -Browning H. Pins C367
-Edinburgh University C363(R) -Sinking H. Soundboards C35*+
-Flutes 22,13 Hurdy Gurdy-Shafts and Bearings C340
-Karl Marx Universistat 22,15; Iconography 23,9
C348 Ivory-Artificial 24,9
-Nurnberg 22,13;23,12 Keyboards-Lead in K. C341
-Haags Gemeentemuseum 22,13 Logarithms 22,10
-Shrine to Music C365 (R) Lute-Action C335
-Ashmolean (Hill) 22,12 -Belly 23,46
-Vancouver Museum 23,2 -Construction C321
Cittern 22,16 -Enigmatic Bars C334
Climate 22,3;23,4 -Fretting C334
Chitarrone 22,4;22,36 -Moulds 24,8
Clavichord-C./Spinette C370 -Outlines C377
Collection-Bate 25,7 -pegs 24 t 9 '
•., -Dean Castle 25,5 -Shape C324
-van Raalte C36O Luthiers-Guild of American L. 24,7
Computation 22,10*22,12 Manuscript-Facsimiles 22,13;24,11
Conservation C38O Materials^General 22,7
Construction-Lute C321 Measurement-Small Objects C357
Copper-Annealing 25,4 Mordent-Inverted C359
Cornett 22 ,3;22,'+; 22,5;C357 Music see Manuscript
Coursfts 22,7;23,10;24,8 Nomenclature see Terminology
Doucaine C373 Organ Pitch C342;C372
30

Ornamentation-Musical C359 ExtendedLutes C337


paint 22,8;24,4;24,10 -Harp 23,8
pegs 25,6 -Harpsichord etc 24,4
Photogrammetry C320;C332 -Plucked Keyboard C368
Piano-Restoration Report C366 -Problems of Nomenclature C323
Pitch C322 Theorbo 22,4;22,36
-Organ C342;C372 Timber see Wood
Plane Scraping C318 Titebond 22,8*24,8
Planes 23,7 Toneholes-tJndercutting Measuring
Plans 23,5 Device C333
-Bate Collection 25,6 Tools 22,3;22,8
-Berlin Musikinstrumenten Trumpet-Baroque Manufacture C330
Museum 22,25 Tuner 22,8;23,6
-Brussels Conservatoire 22,19 Tuning Pins-Manufacture in Lathe
-Copying 23,*+ C372
-Hill Collection 22,12 -Surface Finish 24,5;C367
-Smithsonian Washington 2*+,33 -Traditional C341
-Kunthistorisch.es Museum Varnish-Spirit 22,14
Vienna 24,21 Viol-Design of Belly C381
-Viola D'Amore 25,6 -Tailpieces 25,8
Plywood. 23,4 -Talbot's Measurements C382
pricing 23,3 -Treble Lower Backfold C352
pumice 22,8 Violin-Restoration Report C378
Recorder-Windway Modification C331 Violoncello Piccolo 22,14
-Restoration of Edge C353 Wire 22,33
Reed 22,9 Wood 22,8-24,9
Reeds-Early Double, Survey Pros- -Box 23,10;24,11;25,4;25,9
pectus C336 -Cypress 24,11
Restoration Report-Piano C366 -Identification 24,8
-Violin C378 Workshop-Proposed Mediaeval C375
Ribs-Lute C321 Wrest Pins see Tuning Pins
Router^Duplicator 23,4 Zurna see Shawm-Forked
Saxophone-Sopranissimo 23,3
Shakunachis 23,11
Shalmes-Styll 21,4;C373
Shawm-Forked 22,4-,25,3
Sound Bank 22,11
Soundboard-A Possible S. Finish
C341
-Lute 22,23
Spinette-Clavichord/S. C370
Strings-Covered S. Clavichord and
Square Piano C329
-Diameter Mersenne*s Bass
Viol C343
-Grosseur, Mersenne C344
-Gut 23,7;24,3
-Number of Guts C325
-Winding 23,22
-Wire 22,33;23,6;24,11
Survivability see Climate
Tambourine 22,16
Terminology-Organalogical C376
-Criteria for Naming Instruments
C323;C351
FELLOWSHIP of MAKERS and RESTORERS of HISTORICAL INSTRUMENTS
1981 LIST of MEMBERS — 3rd Supplement, as at 14th January 1982
* in left-hand margin denotes a change of address etc from the Main
List or previous Supplements. Not all those shown have yet renewed
their subscriptions for 1982, so that it vey be that a few of those
listed will not in fact be members for 1982.
• Ian Abernethy, 47 Main St, Heiton, Kelso, Roxburghshire, Scotland,
TD5 8JR, UK; tel: Roxburgh 273.
E.J.Baars, Robert Kochlaan 630, NL-2035 BV Haarlem, Netherlands;
tel: 023-340077.
Domenico Bertoletti, Sabbionara, via S.Antonio no.22, 38063 Avio,
Trento, Italy (lute, guitar; M.R).
Daniel Beuman, Langelaar 61, NL-4847 EL Teteringen, Netherlands; tel:
076-812186 (hpschd; M ) .
M.J.Bezemer. Frankendaal 22, NL-5653 PE Eindhoven, Netherlands
(hpschd).
* Benjamin Bland, 8 Polstead Close, Lavenham Park, Stowmarket IP14 2PJ.
* Lars Bohman, tel: 0755-10078 (Nyckelharpa, str.instrs).
G.N.Burton, "Mar-y-Mar", Minster Drive, Minster-in-Sheppey, Kent
MEL2 2NG; tel:0795-873485 (ww, keybds, hurdy-g; M,P).
E.P.M.de Clippelaar, Hogeweg 126A, NL-3815 LX Amersfoort, Netherlands;
tel: 033-753258 (vln, uill.pipes, flutes).
E.J.Cole, 1 Field View Rise, Bricket Wood, St.Albans, Herts AL2 3RT,
UK; tel: 09273-77863 (wind; M ) .
Ivor van Dael, Oud Liesboslaan 271, NL-4839 AC Breda, Netherlands;
tel: 076-142824 (fortepiano; M,R).
Michael J.Daniels, 6 Chestnut Hill, Eaton, Norwich NR4 6NL, UK; tel:
0603-52236 (lute,clavchd; M,P).
* Theodore Diehl, 2de Leliedwarsstr.9, NL-1015 TB Amsterdam, Netherlands;
tel: 020-258058.
Th.M.van Dijk, v.d.Kooystraat 12, NL-8921 BB Leeuwarden, Netherlands;
tel: 05100-27502 (hpschd, organ).
R.J.Dodds, 138 Bedeburn Road, Jarrow, Tyne & Wear NE32 5AU, UK; tel:
Jarrow 897885 (fiddle, nthbr.pipes,P; str.instrs, M,R).
• John Downing. 34 Birch Hill, Baie d'Urfe*, Gue"bec, Canada H9X 3H8;
tel: (51*4) 457-5845.
* Nicholas Driver, Thornham Herbs, The Walled Garden, Thornham Magna,
nr Eye, Suffolk IP23 8HA, UK; tel: Mellis 510.
Gtlnter Dullat, D-6085 Nauheim, Wilh.-Leibl-Str.10, West Germany; tel:
00152/6538 (brass, ww; C ) .
Brian Edwards, Mount Pleasant Stores, Alltwen, Pontardawe, Swansea
SA8 3AH, UK; tel:0792-862220 (organ, hpschd, str.instrs; M,R).
* Winfried Eggenweber, Favoritenstr.235a/6, A-1100 Wien, Austria.
Paul Elst, Jozef Embrechtsstraet 26, B-2360 Oud-Turnhout, Belgium;
tel:014/415802 (hpschd, M; harmoniums, C ) .
• James Fawcett, Langham Vicarage, Holt, Norfolk NR25 7BX, UK; tel:
032-875246.
jtagje Feldbrugge, Gravenstraat 77, NL-4331 KN Middelburg, Netherlands;
tel: 01180-36234.
Craig Fischer, 2 Nichols St, Forestville, SA 5035, Australia; tel:
08-2971187 (guitar, mandolin, etc; M,R).
David Fisher, 30 Vista Way, Kenton, Harrow. Middx HA3 OSW, UK; tel:
01-907 5443 (gtar, hospchd, clavchd; M ) .
• Eric R.Franklin, 15 High Street, Pirton, Herts SG5 3PS, UK; tel:
Pirton 480.
P.Gilbert, 84 Hunter House Road, Sheffield Sll 8TW; tel: Sheffield
683112 (folk instrs).
Michel Gohier. 37 72e ave.(est), Blainville, Quebec, Canada J7C 1S8;
tel: (514) 430-2887 (ww; M f R,C).
• Ian Gould, 22 Dumolos Lane, Glascote, Tamworth, Staffs B77 2BX; tel:
0827-56810.
Carl Dudley Hanson, tel: Halifax 21209.
Ian Harwood, tel: 0903-814382 (& bows).
H.A.Hens, Maaskade 121, NL-59H EZ Venlo, Netherlands (clavchd).
Chris Isbell, tel: 0703-618875.
Mark Jackson, Stable Gottage, c/o Hundson House, Eastwick Road,
nr Ware, Herts, UK; tel: Ware 871090.
James L.Kammerer, 19 Westover PI.,North East, MD 21901, USA; tel:(301)
287-2550 (gtar, lute, hpschd; C,P).
Geoffrey Kime, 18 Jane Street, Saltaire, Shipley, W.Yorks BD18 3HA,UK;
tel: Bradford 590538.
Andre Klaassen, Oude Noord 4, Utrecht, Netherlands.
Jitze Kopinga, Sportstraat 17B, NL-6707 GG Wageningen, Netherlands;
tel:08370-20711 (fidl, lute, bagppe, dulcmr; M,P).
H.G.Laarman, Comeniusstr.123, NL-1065 BJ Amsterdam, Netherlands; tel:
020-152396.
Eugene Lambe, tel: Cragga 222.
G.J.K.Landwehr, Amsteldijk 82iii, NL-1074 JA Amsterdam, Netherlands;
tel: 020-726468 (bows, viols; M,P). P
Robert Lay, tel: Duntocher 75996.
Francis Longmaid, tel: 0772-864571.
Philip Lord, tel: 02207-19733.
Robert Lundberg, 6532 SE 71st Avenue, Portland, OR 97206, USA; tel: fc
(503) 775-9388 (lute, archlute, theorbo; M,R,C).
Alan Mills, Magill Campus, SA College of Advanced Education, Magill,
SA 5072, Australia; tel: 08-332 4711.
William Molan, tel: Ubbeston 613.
Anthony Moonen, tel: 043-74322.
Frits van den Munckhof, Hamerstraat 52, NL-6411 CW Heerlen, Nether-
lands; tel: 045-716372 (violin; M,R).
Arnold Myers, 21 Campbell Park Crescent, Edinburgh EH13 OHT; tel: 031-
441 3133 (all instrs, Cur; brass, C; sackbut,P).
David Owen, tel: 0270-625304.
Luis Artur C.M.Esteves Pereira, Av.Humberto Delgado 94-40D, 4760 V.N.
Famalicao, Portugal; tel: 24713.
Mark Primavesi, Cruachan, Manor Lane, Newbury, Berks; tel:0635-48328
(harp, spinet; M,R).
Thomas Rein, 178 North Upper, Lexington, KY 40507, USA.
Carsten Rosbaek, Pra3stevaenget 3, DK-5610 Assens, Denmark.
Richard Schaumloffel, 10 Yeo Ave, Highgate, SA 5063, Australia; tel:
08-272 3035 (hpschd; M,R).
Steven Silverstein, 376 Call Hollow Road, Stony Point, NY 10980, USA;
tel:(914) 354-2349 (recrdr, flute, cornett; M,P).
G.M.Simons, Soesterbergstraat 4, NL-6417 EW Heerlen, Netherlands;
tel:045-413497 (virgnl, vln, hpschd; M ) .
A.Peter Slootweg, Theemsdreef 394, NL-3562 ER Utrecht, Netherlands;
tel:030-627418 (lute, sq.pfte, hpschd, viols, bows; M,R).
Len Stanners, tel: 665-203.
C.Stroom, Gerrit van der Veenstraat 169, NL-1077 EB Amsterdam, Nether-
lands; tel:020-725533 (wind; M ) .
Jonathan Swayne, 1 Gilbert's Corner, Baltonsborough, Glastonbury,
Somerset BA6 8RB,UK; tel:0458-50911.
W.S.Thorneycroft, Hovenierstraat 101, Alkmaar, Netherlands; tel:
Alkmaar 618292 (lute; P ) .
M.J.Turner, 20 Gallants Lane, East Harling, Norwich NR16 2NQ, UK.
Maish Weisman, The Willows, Sutton Lane, Stanton Harcourt, Oxon, UK;
tel:0865-882020 (until April 1st, then back to New Mexico).
Richard Wells, 43 Waterworks Road, Trowbridge, Wilts BA14 OAL, UK
(lute; M,P).
J.P.Zeebrechts, Neumannlaan 2. NL-5624 KM Eindhoven, Netherlands;
tel:040-437315 (hpschd; M ) .
33
I
David Zimet, 354 Villa Canto, El Paso, TX 79912, USA; tel: (915)
584-8628 (ww, esp.clarinet; M,R).
J.C.de Zwart, Maduroweg 3, NL-2252 TS Voorschoten, Netherlands;
tel: 01717-5824 (hpschd; M,P).
S X X S X S X X X X X X X X
Even though I've had to start a third page, would members please forgive
me if we don't have the usual indexes of instruments and places? I'm
a bit up to the eyebrows this quarter.
One you might note: The Edinburgh University Collection of Historic
Instruments (Reid School of Music - what was the Galpin Society Per-
manent Collection, including the original Rerdall Collection) can
be added to the list of Museums; Arnold Myers (see the previous page)
is the curator there.
Next quarter we get the next main list; please check that you are
listed as you wish to be (NB I haven't added the new zip/PO codes
you sent Margaret with your renewals above, but I have noted them).
You might like to bear in mind that we are a fairly informal gang
and that first names are a bit more friendly than initials, but
that's up to you. There is always a good deal of variation in the
List, as you must have noticed (eg St, Street, Ave, Avenue) but I
put them in as you send them, assuming that that is how you prefer
to be listed.
The one thing I don't do,as you must have noticed also, is put in
titles, whether Mr., Mrs., Miss, Dr., Prof., or any other, and that
is deliberate. For one thing, so far as ladies are concerned, I
usually don't know which they are (and I refuse to have female manu-
scripts in the list), for another,with a fair number of overseas
members I don't even know which sex they are, being unfamiliar with
first names in some languages, and for the third, some of our known
Dr and Prof use the titles and others don't, so it seems better to
have none than some. Perhaps one day a lord or a duke will join,
and then I'll have to put the title in as it's part of the name, but
till then I hope you agree that we're on the right lines in this
respect; none of you have commented on it anyway!
Any corrections to this or the main list to me by 4th April, please;
any corrections to what appears on your envelopes to Enzo Puzzovio
as soon as possible.
Jeremy Montagu
(there wasn't room for the address c/o Faculty of Music
at the bottom of the Bulletin, but St.Aldate's
you probably know it anyway) Oxford 0X1 1DB, UK.

FoMRHI Book News Chris Isbell


There is an article in the October 1981 Scientific American on
'The Acoustics of Violin Plates' by Carleen Maley Hutchins, on how
they are trying to scientifically evaluate what qualities in the raw
top and back plates make a good instrument. Some of the methods
would be fairly easy to apply 'at home'. I assume that much of the
information in the article would also apply to other string instru-
ments.
34

FoMRHI Comm. 396 by Anatoly Lajaruzny

Production of P l e c t r u m from Bird F e a t h e r s

It is very delicate work that r e q u i r e s great c a r e , but due to the


simple device invented by my friend, the c o m p o s e r and p e r f o r m e r (but
not a m a k e r ) - S Krutikov - he managed to do it perfectly and quickly.
His device is made from medical p i n c e r s (fig 1). Both tips a r e ground in
such a way that the line of their contact makes an a r c (fig 2). It is
convenient to make this with a d e n t i s t ' s d r i l l . The radius of t h i s a r c is
equal to the radius of an average quill (1.2 - 1.5 mm for a raven feather,
and 2 - 2.5 mm for a crow feather). The tips a r e turned from the outside
to the required cone (fig 3) , and lastly: on to the inside (concave and
convex) s u r f a c e s of the pincer legs a r e glued thin pieces of l e a t h e r (fig 4).

P l e c t r u m production c o n s i s t s of two s t a g e s :
a) cut the stem of the feather into pieces (cylinders) of the r e q u i r e d
length (8 - 12 mm) with a new r a z o r blade
b) take every cylinder length with the pincer and cut everything protruding
from the pincer legs with the blade.

The finished plectrum r e m a i n s clamped in the pincer exactly


copying its form. R e l e a s e it and clamp again the r e m a i n d e r of cylinder
but from the other side, etc. Such cutting out saves m a t e r i a l (fig 5).
1

i
Ui.

4.
2.

" *
36

FoMRHI Comm. 397 by Anatoly Lajaruzny

Sound Hole Evolution, or from Q to /Jj

1. The sound-hole is an important acoustic and constructive


element of a m u s i c a l i n s t r u m e n t . T h e r e a r e two significant quantities
which a r e known and a r e taken into consideration by m u s i c a l m a k e r s when
designing i n s t r u m e n t s :
a) dimensions of a hole which d e t e r m i n e the resonant frequency of a i r
volume in the body of an i n s t r u m e n t and thus influence the t i m b r e of the
i n s t r u m e n t ' s sound.
b) position of the hole, which influences the construction of the body and
dictates the placing of b a r s on the soundboard etc.

2. H i s t o r i c a l and aesthetic a s p e c t s of the sound-hole problem a r e


l e s s worked out. In the p r o c e s s of making some e a r l y stringed i n s t r u m e n t s
I was faced with a problem of selection between this or the other con-
figuration of the sound-hole. Studying this narrow question (on the b a s i s of
n u m e r o u s p i c t u r e s of i n s t r u m e n t s in the books catalogues etc), I've
unexpectedly come to two very important (in my opinion) conclusions:
a) evolution of t h i s element is subjected to a definite s y s t e m bound to a
great extent with time factor r a t h e r than with variety of i n s t r u m e n t s ,
and t h a t ' 8 why -
b) it is possible to study changing of the sound-hole as such without
taking in account the development of i n s t r u m e n t s of s e p a r a t e families.

3. In my notes I don't pretend to elucidate fully the question of the


sound-hole evolution. It is m e r e l y the way a problem is put and possibility
of its decision. In addition it is simply some thoughts and logical
c o n s t r u c t i o n s which I want to d i s c u s s with my colleagues. T h e r e a r e
m o r e questions than a n s w e r s . . . So . . .

4. F i r s t of all t h e r e was a hole. One or s e v e r a l but c e r t a i n l y in


the c e n t r e (of the board) and certainly round. This form was dictated by
rotation of the cutting tool, simplicity and l a c o n i c i s m of the c i r c l e a s a
g e o m e t r i c a l figure, prompted by n a t u r e (hollow of a t r e e , the moon and so
on). The heathen cult of the sun has consolidated this element on the
soundboard of many folk i n s t r u m e n t s (here at the Ukrain - bandura, fig 4. 1)
till our days. In .Europe it is confirmed in all stringed i n s t r u m e n t s with
a low b r i d g e : lute (4. 2) mandoline (4. 3) g u i t a r e (4. 4). The difference is
only in decoration of the hole.

5. V e r y seldom do we meet e a r l y i n s t r u m e n t s with holes of


non-round form. It i s i n t e r e s t i n g to note that the configuration of some
of them is adopted from the a r c h i t e c t u r e (5. 1). If instead of one round
hole in the c e n t r e it w a s d r i l l e d (or burnt through) many little ones, the
figure they m a d e differed from a c i r c l e but a s a b a s e it often r e m a i n e d a
37

c i r c l e (5. 2)

6. The division of s t r i n g i n s t r u m e n t s into plucked and bowed h a s


led to a higher bridge in the second group of i n s t r u m e n t s and i n c r e a s i n g
of s t r i n g s t r e s s on the soundboard. The bridge was placed in the c e n t r e
of the soundboard and a longitudinal b a r was r e q u i r e d for strengthening it.
So the hole b e c a m e b i f u r c a t e d . In the i n s t r u m e n t s of the e a r l y Middle
Ages we can s e e two p r i n c i p l e s of the hole division, "doubling 1 ' (6.1 and
6.2) and " c u t t i n g " to two p a r t s (6.3 and 6.4). Very often two such holes
a r e i n s c r i b e d into a c i r c l e (6. 5).

7. In the c o u r s e of t i m e each of t h e s e two holes b e c a m e of


independent aesthetic significance. In some i n s t r u m e n t s t h i s tendency is
l e s s e x p r e s s e d (7.1 and 7.2), in o t h e r s - m o r e e x p r e s s e d (7.3 and 7.4).

8. At l a s t an imprtant moment came when old t r a d i t i o n s gave way


to new s e a r c h e s and a e s t h e t i c t r e n d s : both soundholes departed completely
from subjecting to one main figure and aquired quite independent form, At
first the b a s i c f o r m s a r e old ones: s q u a r e holes (8.1) and c r e s c e n t s . But
in t h e s e c r e s c e n t s we see a p r o t e s t against the e a r l y form (8.2).

9. By the 15th and 16th c e n t u r i e s f o r m s of holes b e c a m e


complicated (9.1); narrow holes a r e often finished with a round cut, a
prototype of the future baroque volute (9.2 and 9.3). N e a r to baroque the
form of the sound-hole b e c a m e m o r e p l a s t i c , s o m e t i m e s repeating
configurations of a body (9.4 and 9.5). Another significant moment c a m e
when a f i g u r e of the type (9.2 - 9.5), typical for this epoch turned with its
lower part and b e c a m e a b a s i s for the next sound-hole changes in the
whole families of bowed i n s t r u m e n t s . The e a r l i e s t s i m i l a r figure I have
met dated from the second half of the 16th century (9.6). T h i s mentioned
example has c a r r i e d in itself t r a c e s of old f o r m s : the narrow c e n t r a l
part h a s one width a c r o s s the whole length, straight, without any p r o j e c -
tions a s on fig (9.5) but it is the last step to the well-known violin " f ' .

10. The 17th to 18th c e n t u r i e s is the epoch of d i v e r s i t y of sound-


hole f o r m s , when they take v a r i o u s outlines. This is the t i m e of m o r e o r
l e s s stable t r a d i t i o n s : the r o s e of a lute differs from a guitar, and even a
violin from a viola etc, but even h e r e is felt an influence of the old
Medieval and e a r l y R e n a i s s a n c e t h e m e s (10.1 and 10.2 - c o m p a r e with
9.L.10.3 and 10.4 - with 9.5 and 9.6).

11. It r e m a i n s to add that the development of the soundhole did not


go straightly, t h e r e w e r e some deviations , r e t u r n i n g to the past (11.1
and 11.2). However t h e s e deviations w e r e not typical and only confirmed
to
the g e n e r a l tendency from simple to complicated, from O ^5 •

Such s e e m s to m e r e t r o s p e c t i v e of the sound-hole form develop-


ment. I hope the enclosed table, made on the b a s t s of t h i s d i s c u s s i o n
and suppositions will help one m o r e freely to orient oneself while
selecting t h i s or that form of the sound-hole suitable for an i n s t r u m e n t of
this or that epoch.
38

4.1 4 3 '-r,4
bdnoijra TK.irJoun :/if' * Q

O
£* o o

i
.^ O
6

o
0
o
o

o
o
o

t).l Warp, /3V0 52 fP'indi/T ( JJOOQ ?/<?•"/•

io.l 6.3 6A __ 6,5


kowe<LltG?Q jidil, m

J.I } 2 ?, ti
v i
Solve/ 6ou>t'J.
• tits {160 I b'C m 3S - 94
39

I
S.Z
fJucLed' ///

9-1 91 9.3 3A 3.5 9.6


Pochetti, Li ?a Ja p?4cao
w£yt /sII %M /too*

/O. I \fja\ 10,1 V.oft


U iitc&b Mb ci'ainocd wit Ib99
J amba. Mi
KJ
a i. /w/ HI litafa'farre.
§Uriiall lilt isa
* • »
» 0 *
© •
9

s1 xi1

t
Xi¥

)
XVI

XV*"

J
41

Preamble « 5

It has been suggested that the discussion of gracing practices


which I indulged in in Comm. 359 should be continued in the Newsletter or
Journal of the Lute Society. If a reply to my Comm. appears in any such
publication I will gladly respond there. Yet the subject is relevant to
performance of early music on all instruments (as well as voices) and
deserves a wider reading audience than lute specialists.

Perhaps Early Music Magazine would be a more appropriate


vehicle, but the lead time between writing and publication there is long
enough to discourage an extended dialogue. The glossyness and therefore
implied formality in that journal also inhibits the expression of ideas that
might not be as comprehensively researched as one would have liked.

When I write ideas which conflict with those of others, I have


some reason to believe I am correct, but I am much more interested in
learning from the response I get than in remaining correct. The search
for ultimate truth in scholarship is much more important than winning
fights. The informality in this Quarterly encourages me to speak my
mind with every expectation of quick recovery after being shown I was a
fool and quick resolution of disagreements back into friendship.

As for reading audience, our members include a large contingent


of performers as well as makers. These performers are members
because they are particularly interested in the details of historical
instruments. These tend also to be just those performers who are
interested in the details of historical performance practices.

As for the makers, many are very interested in the topic. The
makers of any sort of equipment usually keep well aware of the uses their
customers put that equipment to. This is very pertinent to design and
quality control, as well as to the instruction that new customers some-
times need. Musical instrument makers are not exceptions.

If other journals suspect that what I write here could be of


interest to their readership, 1 would be most honoured either to give
permission for a reprint or to spruce it up for their purposes.
42
FoMRHI Comm 398

A SURVEY OF LUTE. GRACES IN THE RENAISSANCE AND EARLY


BAROQUE
By Ephraim Segerman

Introduction

Almost all of the information on how lute graces were performed


in the Renaissance that I am aware of has been published (and when
appropriate, translated) by Gombosi (1) and Poulton (2),(3). The aim of
this paper is to provide a much more detailed analysis of the significance
of that information than that offered by these authors. There is no
implication here that their understanding of the information was in any
way deficient. Gombosi obviously was primarily concerned with Capirolafs
repertoire, and to him gracing was not an issue that warranted extended
discussion. Poulton was particularly concerned with gracing, but her
scholarly style has always involved presenting the historical information
in as objective a way as possible, keeping speculation down to a minimum.

When those authors wrote on the subject, gracing on lutes was


very rare, and there was no issue of possible misinterpretation of the
information they presented. The situation nowadays is quite different.
The majority of accomplished lute players are now incorporating some
graces in their performances of Renaissance and early Baroque music.
But the fashion is to use the inverted mordent almost to the exclusion of
other graces. To be a leading lute player one needs to be somewhat of a
scholar. These player-scholars cite the information printed by Gombosi
and Poulton as evidence justifying their gracing practices. This inter-
pretation is contrary to the conclusions these authors themselves came to.
Since the interpretation of the evidence they presented had become
controversial, it is important that this evidence should now be subjected
to more detailed analysis than those authors would have considered
necessary at the time they wrote on the subject.

In this Comm, I am covering the same ground as the fundamental


article on graces by Poulton (2). This is inevitable, and I owe much to
that article.

A note on historical method is appropriate here. If what an


early writer wrote about a practice does not agree with our concept of
what the practice was, it is all tod easy to assume that the writer was
confused, or he was mistaken either because of incompetence or accident,
or he was trying to sell his own atypical ideas. One can expect these from
writers of any age. In this way each of us can write our own histories
wtth a minimum of recourse to the surviving historical information. This
approach is used by a surprising number of historians. History can be
more objective than what each historian would like it to be.
An objective history has a maximum of consistency between the
historical story and the surviving historical information. There is still
much need to flesh out the story with speculation where no historical
information survives, so multiple histories are possible. Yet, an
insistence on the truth of the surviving information will keep this number
down to a minimum, which is the best that scholarship can do.

Thus, for an objective history, one must assume that, unless


there is contrary evidence, the early writer was utterly competent,
truthful, consistent and typical of his time and place. Though this is
unlikely in detail, this assumption will lead to historical stories with the
highest probability of resembling historical truth because it uses more of
the surviving information.

In this spirit, I have extracted every bit of information I can


from each source, considering what the writer wrote, and what he did
not include. Some readers might judge that I have indulged in more
analysis of the writings of the early writers than the casualness of these
writings can justify. I strongly disagree. I believe the correct approach
is that of typical detective story, where every piece of casual evidence
is taken very seriously in attempting to piece together the story.

Capirola

In 1955, Gombosi published his transcription of the manuscript


book of Capirola's lute music written by his student Vitali in circa 1517
(1). This is probably the earliest surviving lute sources to describe
notate and illustrate the application of optional graces to notes in the music.
The description is in Vitali's introduction and the quotes from that
description given below are from Gombosi's translation.

A lute grace involves an initial pluck by a finger of the right hand,


with all subsequent variations in sound caused by left-hand fingering. In
his discussion of the ornaments Vitali never mentions right-hand plucking.
We can thus not be absolutely sure that graces are described. Neverthe-
less since execution is described as very rapid with no comments on
associated right-hand technique, left-hand-only execution is likely, so we
assume that graces are described.

There are two types of graces notated and discussed. The first
is notated by a number made of red dots following the tablature number
(in black) that it is associated with. The appearance of dotted red
numbers "means nothing else than that they should be played with a
tremolo . . .". Execution is illustrated by an example where "you make
a beat on the second fret of the highest string; hold fast to this beat and
tremolize with another finger on the 3rd fret". To "make a beat" clearly
means to stop a fret. It is not clear as to whether this term implies a
pluck when the fret is first stopped or perhaps later when the tremolizing
s t a r t s . Since the implication of the notation in dots is "like a tremolizing
thing that cannot be held fast by the finger", rapid a p p e a r a n c e and
d i s a p p e a r a n c e of the ^auxilliary note is c h a r a c t e r i s t i c of a t r e m o l o . The
number of t i m e s t h i s happens i s not c l e a r from this d e s c r i p t i o n .

Using G o m b o s i ' s numbering, this g r a c e a p p e a r s in p i e c e s


numbered 4, 6, 7, 8, 13, 14, 16, 17, 18, 26, 27, 29 and 37 in the book. In
p i e c e s 13 and 14 the dotted red number a p p e a r s a s the s a m e number a s
the note preceeding it. By following the example, one would then expect a
two-finger vibrato (or c l o s e shake) on the indicated fret. T h i s g r a c e i s
j^v*^ effective when the f r e t s a r e relatively thick and the string tension
A relatively low. In the other a p p e a r a n c e s of t h i s g r a c e the dotted red note
[.J*1*" sounds one diatonic note higher than the black note it is a s s o c i a t e d with.

The second g r a c e is notated by two red dots above the relevant


t a b l a t u r e number. It is introduced by the p h r a s e "And if it o c c u r s to you
to t r e m o l i z e on a single note . . . ". Execution is i l l u s t r a t e d by an example
w h e r e " You make a beat on the first fret of the middle s t r i n g and then . . .
t r e m o l i z e this note with the single finger". Since no other finger is
involved in the example of this g r a c e , either t h e r e is no auxilliary note, in
which c a s e the g r a c e would be a single-finger vibrato, or the auxilliary
note i s the open s t r i n g . Neither of t h e s e is possible if the graced note is
unfretted so we a s s u m e that the a p p e a r a n c e of two red dots over a 0 in
the 10th m e a s u r e of piece 17 in the book i s an e r r o r , and the dots should
be over the 3 just below on the next s t r i n g in the t a b l a t u r e .

C a p i r o l a ' s second g r a c e a p p e a r s in p i e c e s 4, 6, 7, 9, 16, 17, 26, 29,


and 37. In the m u s i c , the two red dots appear over f r e t s 2, 3, and 5 in
addition to 1 a s d i s c u s s e d in the example. With r e s p e c t to the higher-
numbered frets, if the g r a c e is a vibrato no further a s s u m p t i o n s a r e
r e q u i r e d . If the g r a c e i n v o l v e s a lower auxilliary, the most probable
candidate is the diatonic lower note, but the open s t r i n g or s e v e r a l lower
notes cannot be ruled out. Except for the unlikely possibility that the
auxilliary note is always the open s t r i n g , at least one other finger is
involved in stopping the s t r i n g while another finger t r e m o l i z e s .

If we accept the d i a t o n i c - l o w e r - n o t e possibility on higher frets


in the second g r a c e , then we have one fret being stopped and another
involved in t r e m o l i z i n g , just like in the first g r a c e . Yet t h i s second
g r a c e is c h a r a c t e r i z e d a s t r e m o l i z i n g *'on a single note" which is
differentiated from the first g r a c e in t h i s r e s p e c t . The only way I can
s e e for t h i s to be so is if the meaning of " t r e m o l i z i n g " a note includes
repetition, and that a n o n - r e p e a t e d note i s not considered to be t r e m o l i z e d .
Then if the lower auxilliary note in the second g r a c e is not r e p e a t e d the
t e r m does not apply to it and that g r a c e is t r e m o l i z i n g on a single note
(the main one). This g r a c e would then be the n o r m a l lower m o r d a n t . We
must a s s u m e that Capirola was consistant (unless t h e r e is c o n t r a r y
evidence) so the auxilliary note in the first g r a c e would then also need to
be r e p e a t e d . That g r a c e would then be a shake. Whether the shake
s t a r t s on the main note or upper auxilliary is not c l e a r , but t h i s a n a l y s i s
excludes an upper mordent a s a possible short shake s t a r t i n g on the main
note s i n c e the upper auxilliary note is not repeated in an upper m o r d a n t .

In s u m m a r y , It is not absolutely c l e a r whether Capirola*s second


g r a c e (notated with two red dots over the t a b l a t u r e number) has auxilliary
notes o r not. If there is no auxilliary note, the second g r a c e is a vibrato,
and all we know of the first g r a c e (notat ed by a following number in red
dots) is that it h a s an auxilliary note that s o m e t i m e s is the s a m e a s the
main note but usually is a diatonic note higher. If the second g r a c e does
have an a u x i l l i a r y note, then the g r a c e most probably is a lower mordent,
and the first g r a c e is usually a shake (starting note unspecified) and s o m e -
t i m e s a close s h a k e . This possibility involving a lower mordent is m o r e
likely since the specification of two m e a n s of generating a vibrato is an
unlikely sophistication for the t i m e . It does not include an inverted or
upper m o r d e n t a s a possible i n t e r p r e t a t i o n .

T h i s a n a l y s i s does not differ from G o m b o s i ' s conclusions


concerning the nature of C a p i r o l a ' s g r a c e s in any significant way, but it
does differ from the conclusions of some of the u p p e r - m o r d e n t advocates
amongst t o d a y ' s l u t a n i s t s . T h i s point and other points with r e s p e c t to
C a p i r o l a ' s g r a c e s will be d i s c u s s e d further after Sancta M a r i a ' s evidence
is reviewed.

F r a n c e s c o da Milano and P i e t r o Paulo Borrono

The 1548 print of music by F r a n c e s c o da Milano and P i e t r o Paulo


B o r r o n o (4) d e s c r i b e s and notates a single g r a c e .

The d e s c r i p t i o n (with my b r a c k e t s added to P o u l t o n ' s translation)


(2) is: " w h e r e a c i r c l e is found ( ), two fingers must be placed on the
string and the finger on the l e s s e r number must be held firm. Pull down
L • ,. L ft- plucking initially)
the string with the finger which is on the higher number J 2 n o ^ s o , 7 n d i n g J
. lower , .. . fi. e. the fret
a s if the voice w e r e notated on the of the two f r e t s . L e iower
lower on the fingerboard (towards the b r i d g e ) ] T h i s .g d o n e b e c a u s e the
of the two fret n u m b e r s (towards the nut) J
lute will sound s w e e t e r . But the said c i r c l e is one stroke only."

The d e s c r i p t i o n a s s u m e s the c a s e where both the main note and


the upper auxilliary a r e stopped. The first sentefsqe t e l l s u s that at the
beginning of the g r a c e , both fingers a r e down on the s t r i n g . The section
of the second section before editorial b r a c k e t s can then only mean that
the finger is pulled off in such a way a s to subsequently sound the note of
the lower number. The r e s t of that sentence is u n c l e a r in itself, and the
bracketed additions show two different i n t e r p r e t a t i o n s . The choice does
not effect the execution. The final sentence indicates that one r i g h t -
hand pluck is involved in the g r a c e but does not state when it o c c u r s . If
this pluck is after the operation d e s c r i b e d in the second sentence then one
would only hear the main note sounding twice. Then the placing of the
plucking left-hand finger would be i m m a t e r i a l . Since the placing of that
finger is carefully notated to be diatonically related to the main note,
this possibility is ruled out. T h e r e f o r e the right-hand pluck must be at
the beginning of the gi-ace.

T h i s g r a c e is then an appoggiatura from above. Repetition of the


operation of the second sentence is not mentioned but cannot be ruled
out. If it is repeated, the g r a c e would be a shake s t a r t i n g on the upper
auxilliary.

It is c u r i o u s that only one g r a c e is mentioned in this s o u r c e and


its 1550 imitation printed in Switzerland by Wyssenbach (5). All other
s o u r c e s of lute music from the middle of the 16th century mention none at
all . But is only one g r a c e enough for any lute r e p e r t o i r e ? The vast
majority of lute s o u r c e s that mention g r a c e s at all r e f e r to at least two.
This consideration a r g u e s against the possibility that the g r a c e s as used
before by Capirola and a f t e r w a r d s by many w e r e forgotten in m i d - c e n t u r y
Italy and Switzerland. This l e a d s to the suggestion that the shake (includ-
ing close shake) and lower mordent w e r e probably known and used by all
then, and the r e a s o n for the inclusion of the appoggiatura from above in
t h e s e publications was that t h i s was a new g r a c e just coming into fashion
and the p u b l i s h e r s expected that r e a d e r s wanted to l e a r n how to add it to
t h e i r r e p e r t o i r e of g r a c e s .

This suggestion is supported by the point noted by Poulton (op.


cit. ) that this g r a c e is never applied to any of F r a n c e s c o da Milano's works
in this s o u r c e . F r a n c e s c o died in 1543 and if the g r a c e was new in 1548,
fond m e m o r i e s of how F r a n c e s c o played his works would c l e a r l y not have
included its use.

It is possible to g u e s s at r e a s o n s why repetition (resulting in a


shake s t a r t i n g from the upper auxilliary) was not mentioned in t h e s e
publications. The p o s s i b i l i t i e s a r e that 1. ) such a shake was commonly
used but not new, 2. ) such a shake was not used, 3. ) all shakes then
w e r e played with no e m p h a s i s on the s t a r t i n g note, which was so
fleeting that the identity of that s t a r t i n g note was of no significance, and
4. ) such a shake was new as well but it was deemed too advanced or its
description was considered too diffcult or lengthy to include. Without
further information the fourth possibility would normally be the least
acceptable because it l o w e r s the information value of the p r e c i o u s little
h i s t o r i c a l data that s u r v i v e s . But t h e r e is further information that
pushes it to the fore,and that is in the Sancta Maria book(6). Sancta
M a r i a d e s c r i b e d the shake as s t a r t i n g on the main note (see t r a n s l a t i o n
by D Poulton)(3) but then added that a very new p r a c t i c e was to s t a r t it
on the .note above.

Sancta M a r i a

B e c a u s e of the g r e a t s i m i l a r i t y between vihuela and lute


technique it is a p p r o p r i a t e to c o n s i d e r s o u r c e s relating to g r a c e s on the
*» /

vihuela together with those of the lute. Sancta Maria's book was
obviously primarily written for keyboard, but the apparent claim that
much of it is relevant to vihuelas as well needs to be respected. To
summarize Sancta Maria's graces, he described the redoble, repeated
trill, special minim trill and two simple trills. The redoble can be made
only on semibreves and it involves both a lower and upper auxilliary, one
of which must be only a semitone from the main note. The initial descrip-
tion could be expressed as an initial lower mordent followed by a shake.
The shake stopped well before the end of the note being graced, allowing
the final main note to sound over a considerable and probably majority
fraction of the time available. This is true for all of Sancta Maria's
graces. The later comment by Sancta Maria mentioned above (concerning
the new way to start the shake) also applies to the redoble, so the new way
to start a redoble is with a turn from above.

The repeated trill is the shake we have already mentioned. It is


performed only on minims. The special minim trill is a turn from above,
allowed only when the upper auxilliary is a tone above the main note and
the lower auxilliary a semitone below. This is also described as a new
grace. The crotchet trills a r e upper and lower mordents, applied to
crotchets and exceptionally "by a miracle" to quavers.
Concerning where the graces are used, this is mentioned only
with repeated trills and simple trills. Repeated trills "are done on all
minims where it is possible for the fingers to do them. " The lower-
mordent type of simple trill is used on alternating crotchets in ascending
scalewise passages while the upper-mordent type is used on alternating
crotchets in descending scalewise passages. In addition an upper mordent
is appropriate where a note marks the change between an ascending and
descending scalewise passage of crotchets. In descending scalewise
passages which are not a sequence of crotchets, the upper mordent should
also be used on two adjacent crotchets following a semibreve, and
crotchets following dotted minims.
The two final examples of the use of simple trills include,
besides the grace marks associated with crotchets as discussed, also
grace marks associated with notes not mentioned in the text: dotted
minims and the final breve of the passage. It is rather more likely that
the graces appropriate to longer notes (repeated trill or redoble) are
intended here (to illustrate the juxtaposition of the graces on long and
short notes) than the application of the simple trills being discussed to
ihese long notes.

The notation used to show the execution of the various graces


are not of the same time values as the notes they apply to. The old
redoble is written as 4 or 8 quavers and a breve to replace a semibreve,
the old repeated trill is written as 8 quavers and a breve to replace a
minim, the special minim trill is written as a quaver rest, 3 quavers and
a breve to replace a minim, and the simple trills are written as 2 quavers
and a semibreve or breve to replace a crotchet or quaver. The most
probable intention is to show the graces in slow-motion, and the fast
notes of each grace were intended to be played as fast as possible.
48

Sancta Maria makes it quite clear that the initial upper auxilliary
note of the three new~graces (new redoble, new repeated trill and special
minim trill) does not sound on the main beat but just before the beat in
the first two and just after in the third. This approach reflects a rather
unique theoretical purity, insisting on main beat consonance. Since
there is no evidence that the first note of a grace was dwelled upon in
this period (as was often the case in later gracing), it is quite possible
for the ear not to care whether that note appeared on or slightly before or
slightly after the beat. This would allow musicians to play it on the beat
if they wished while theoreticians could maintain their consonant purity.

Sancta Maria describes one type of redoble and four types of


trills (he states six types, considerir g simple trills with the auxilliary
note a semitone away from the main note as different from it being a
tone away , but with no distinction in application). The category of
"trill" includes old (starting on the main note) and new (starting on the
upper auxilliary) shakes, a turn from above, and upper and lower mordent.
He states that mordents are used on crotchets rather than shakes because
of the time limitation.

This is no justification, as some players nowadays assume, for


using the upper mordent as an abbreviated old shake on shorter notes in
all cases where a shake seems to be appropriate. Sancta Maria offers
no sanction for using a mordent except in scalewise passages, and then
the choice of which type of mordent is clearly prescribed according to
which direction the scale goes in.

In the 16th century there was much travelling of musicians


between musical establishments of the church and the nobility in different
countries, and so there is some reason to expect a degree of uniformity
in musical practices throughout Europe, with of course, local variants
and different specific preferences of individual musicians. It is there-
fore not unreasonable to assume that Sancta Maria's writings largely
represent practices not confined to Spain. A comparison with previous
writer e on graces is thus of interest.

Sancta Maria and Borrono

The appoggiatura from above as illustrated in Borrono*s music


and described in the aforementioned print of music by Francesca da
Milano and Pietro Borrono, is not mentioned in Sancta Maria's book.
Possible reasons are that 1.) this grace was not used extensively in Spain
in the 1550's, 2.) it was used on plucked instruments in Spain but not on
keyboard instruments, 3.) it was extensively used but Sancta Maria
disapproved of it, or 4.) the Spanish equivalent of this grace at the time
was the turn from above. There is no basis to choose between these
possibilities, but it is worth commenting that the appoggiatura from
above could easily have been considered by Sancta Maria and some of his
contemporaries as more flagrantly threatening the principle of consonance
49

on the beat than the turn because, not having both upper and lower
Uiaries, it pulled tonal focus away from the main note more.
auxilliaries

Sancta Maria and Capirola

Since, according to Sancta Maria, the shake starting on the


upper auxilliary was new in the middle of the 16th century, earlier shakes
such as those of Capirola are most likely to have started on the main
note. In the book of Capirola's music the shake occurs once on a
semibreve (I), about 3 dozen times on a minim(r) and about 3 | dozen
times on a crotchet (£), the last almost always occurring in scalewise
descending passages. By comparison with Sancta Maria, this could be
taken to imply that the shake on a crotchet could have been an upper
mordent, contrary to the analysis of the instructions in the Capirola
book given above. Capirola's shake on a crotchet (or the old short shake)
would have sounded the upper auxilliary twice, thus totalling 5 notes to
the grace as opposed to 3 notes for the upper mordent. If there was not
enough time for a proper short shake in Sancta Maria's crotchet, how
could<there have been in Capirola's crotchet? I know of no data to
indicate that the actual time for the two crotchets was any different or
that Sancta Maria's harpsichorcTjna"d a particularly slower action than
Capirola's lute.

The crucial issue here is the possibly different criteria that


the authors had for what fraction of the crotchet's time had to be devoted
to the final main note of the grace. Sancta Maria notated the mordent as
two quavers and a semibreve or a breve. If taken literally, this would
give the final main note either 4/5ths or 1 0 / l l t h s of the crotchet's time.
It is unlikely that he intended his notation to be taken literally, but I
would guess that he intended to convey the idea that the final main note
should last rather more than half of the crotchet's time. Sancta Maria,
being rather a theoretical purist and not wanting graces to interfere with
the clarity of the harmony, would likewise not want them to interfere
with the clarity of the melodic sequence. A relevantcomment of his is:
"redobles must not be very long, or the music is made ugly. "

Capirola could easily not have had such scruples. It the length
of his final main note of the grace could be shorter, a proper short old
snake could fit into the crotchet time with the fast notes no faster than
those of Sancta Maria. This is not much faster than the written plucked
semiquavers that appear in Capirola's music.

In the Capirola book, the lower mordent occurs about a dozen


times on minims and about two dozen times on crotchets. In the latter
they almost always appear in ascending scalewise passages. Except
for the use on minims, there is no conflict between this usage and that
of Sancta Maria.

Capirola's close shake (or vibrato) appears about a half-dozen


times, always on crotchets. It is not surprising that this grace was not
mentioned by Sancta M a r i a since it is not possible on the h a r p s i c h o r d
or organ. It is possible on the clavichord, and the omission leads u s to
wonder whether the clavichord was popular in Spain at that t i m e .
j0j

Other points about C a p i r o l a ' s g r a c e s d e s e r v e mention. Within


a piece, a p a r t i c u l a r g r a c e tends always to appear in the s a m e place
within a s e m i b r e v e bar. This place is s o m e t i m e s on the main beat at
the beginning of the bar, but in many m o r e pieces it is on the subsidiary
beat half-way through the bar. G r a c e s don't seem to appear when the
music goes into t r i p l e t i m e .

Finally, since the old redoble of Sancta M a r i a was not new in


his t i m e , did it appear between his and C a p i r o l a ' s t i m e ? This may be
the wrong question to ask. The redoble was supposed to be used only on
s e m i b r e v e s and such notes r a r e l y appear in lute music except a s the
final note of a cadence. At that point a lute player would probably use a
cadential division and not a g r a c e . The difference between a division
and a g r a c e is not as c l e a r on a keyboard instrument a s it is on a finger-
board instrument. As a g r a c e , the redoble may not have been used much
on l u t e s or vihuelas.

Henestrosa

Writing probably at the same t i m e as Sancta Maria (mid 15SO's)


H e n e s t r o s a also wrote a book (7) of instructions for v a r i o u s i n s t r u m e n t s .
In c o n t r a s t to Sancta M a r i a , H e n e s t r o s a concerned himself with the
differences between the i n s t r u m e n t s he d i s c u s s e d . In Poulton 1 s t r a n s -
lation (2), H e n e s t r o s a wrote the following concerning g r a c e s on the
vihuela: "The quiebro is to shake the finger on the string and the fret that
you wish to play, or to keep it in place and shake with the second or third
finger one o r two frets higher. "

The terminology h e r e is r e m a r k a b l y s i m i l a r to that in the


Capirola book. They both present the s a m e problem of uncertanty as to
whether t h e r e was a lower auxilliary note when the main note is being
shaked. But H e n e s t r o s a does not give us the added information that
allows us to a s s e s s the probabilities of choices. All one can then say is
that H e n e s t r o s a ' s first g r a c e is a single-finger vibrato if t h e r e is no
auxilliary note or a lower mordent or repeated lower mordent if t h e r e i s .
His second g r a c e is a shake of unspecified type.

The description of g r a c e s do not include the possibility of a


g r a c e having both upper and lower auxilliary notes. It is no s u r p r i s e
that t h i s excludes the redoble on the vihuela, but it a l s o excludes the
t u r n . P e r h a p s he was deliberately being sketchy because g r a c i n g fashions
w e r e rapidly changing and he was not willing, as Sancta M a r i a w a s , to
take a position with r e s p e c t to the new g r a c e s s t a r t i n g on the upper
auxilliary. Of c o u r s e , he may have just d e s c r i b e d the most important
g r a c e s , which a r e m o s t likely to have been the shake and lower mordent.
51

Waissel

The final 16th century source relating to graces on the lute is


that of Waissel in 1592 (8). In Poulton's translation (2), he wrote:
"Mordanten are made by the fingers of the left hand, but only in stops of
whole or half beats and in runs where four letters are on one beat. In
'Coloraturen' they are not used because of the speed when eight or sixteen
are on one beat, except sometimes at the end. Mordanten serve to make
the playing lovely; they are made sometimes with the forefinger some-
times with the middle finger and sometimes with the little finger in such
a way that the fingers are put a little later on the letters and moved two
or three times up and down. Of these things certain rules cannot be
described, they must be left to time and practise. "

It is most probable that Waissel's whole beat was a semibreve,


so that 'Mordanten' are applied to semibreves, minims and sequences of
crotchets, and usually not to quavers and semiquavers. This corresponds
with what Sancta Maria wrote. The term 'letters' could mean the notated
or main notes or it could mean the fret positions. Only one finger seems
to be moving in any particular execution of the grace so two pitches are
involved. That it is "put a little later on the letters" implies that the
lower pitch is the first. That the finger motion is repeated implies that
the grace is either a shake starting on the main note (excluding an upper
mordent) or a repeated appoggiatura from below.

If the sequence "up and down" has significance, a start with "up"
is consistent with "a little later" if the sequence refers to finger position
rather than direction of motion. The final "down" would then favour the
second possibility for the nature of the grace. If Waissel was writing
more generally, giving no significance to the sequence "up and down",
then each of the possibilities or both are equally probable. No other grace
is consistent with his description.

It is unlikely that the second grace, which includes the new


element of starting on a lower auxilliary, was the only one Wais6el used.
Perhaps he was explaining a new grace to be added to the r e a d e r ' s
repertoire of graces, or he was being comprehensive, in which case that
repertoire consisted of either the first or both possibilities, or he was
^describing the most usual grace, deliberately ignoring the others. It
seems to me that the final choice of those three is the most likely. The
first, though, cannot be dismissed lightly.

Robinson
That graces starting on the lower auxilliary were in the air then
is demonstrated by Robinson's book (9) which was published about a
decade after Waissel's. In it Robinson explicitly describes the execution
of but one grace, the appoggiatura from below, which he calls a "fall"
(p. Cij r). The context is the lute m a s t e r ' s response to the student's
52
question of "when and how to use a fall with a r e l i s h . " T h e r e is no hint
h e r e of d i s c u s s i n g g r a c e s comprehensively. It could very easily be a
r e q u e s t for explanation of the latest gimmick being d i s c u s s e d in the a l e -
house.

The m a s t e r ' s r e s p o n s e m a k e s it c l e a r that a fall can o c c u r with


or without a r e l i s h . His r e l i s h then was not a general t e r m for g r a c e
which could have included the fall.

On the previous page (p. C v), Robinson d i s c u s s e s which finger


is used to r e l i s h . Since it is only one finger, the r e l i s h involves but two
pitches (with the possibility of a close shake included). In the example
of the fall followed by a r e l i s h (p. Cij r) the r e l i s h ' s two pitches a r e the
main note and the upper auxilliary.

Two pages e a r l i e r (p. C r), Robinson d i s c u s s e s "a general r u l e


to g r a c e " where the t e r m ' r e l i s h ' is used generally, a s if it is a synonym
for ' g r a c e ' . This section includes the famous statement "note that the
longer the t i m e of a single s t r o k e , that the m o r e neede it hath of a r e l i s h ,
for a r e l i s h will help, both to g r a c e it, and also it helps to continue the
sound o.i the note his full t i m e : but in a quicke time a little touch or j e r k e
will s e r v e . . . ". Thus both a shake lasting the full length of a long note
and an appoggiatura from above would most probably be examples of
relishes.

T h i s is the point that specific instructions on how to play the


r e l i s h that supports a long note or the "touch or j e r k e " would be a p p r o p -
r i a t e , but they a r e absent. P o s s i b l e r e a s o n s for omission a r e 1. that the
execution was so well known and obvious, it would be a waste of space,
2. that the execution of a r e l i s h was so complex that its description would
take too much space, or^the r e l i s h was a family of g r a c e s and the explan-
ation of all m e m b e r s would take too much space. The first possibility is
argued against by the fall, as obvious a g r a c e a s can be imagined, being
explained. The second possibility is argued against by noting that at
least the sequence of notes in the most complex g r a c e is easily notated
in t a b l a t u r e . The third possibility is argued for by our expectation that
a variety of g r a c e s (i. e. both long and short shakes starting on the main
note and on the upper auxilliary, close shake,appoggiatura from above,and
lower and upper m o r d e n t s ) should have a place in Robinson's terminology.

The lower mordent having a lower auxilliary is allowed to be


included in the family by Robinson's statement that one finger is involved
in executing a r e l i s h , and his example of a r e l i s h with an upper auxilliary
that follows the fall does not rule t h i s possibility out. T h i s inclusion m a k e s
the association of the name ' r e l i s h ' w i t h the lower mordent a half-century
l a t e r in the M a n c h e s t e r Gamba Book l e s s e x t r a o r d i n a r y than o t h e r w i s e .
53

Robinson's description of the relish in t e r m s of only one moving


finger is not consistent with including the turn from above as an example.
Yet this was one ol the old graces in use since the middle of the 16th
century, and from the criteria of old vs. new and graces starting from
the main note or upper auxilliary vs. those starting from a lower
auxilliary, the turn from above would easily fit into the relish family. If
it was not a very prominent grace, Robinson could easily have not
considered it worthwhile to mention as an exception.

Robinson1 s general comments on graces discussed above seem to


refer only to relishes, but the "touche or jerke" phrase does not read as
necessarily referring only to relishes. It could refer to an appoggiatura
from above or a mordent amongst the relishes, but it could also include
the fall. Nevertheless, it is clear that Robinson considered that relishes
were the basic graces that a student needs to learn, and that the fall was
somewhat exceptional, mentioned almost by accident in response to a
very specialized question.

If, as Robinson implies, the term "relish" included all of the


major graces used, and the fall was different and of lesser importance,
then it is likely that in earlier times the t e r m s "relish and "grace" were
equivalent, and that the fall was of relatively recent origin.

Robinson's separation in terminology between the fall and almost


every other grace is attractive because very many of the English
tablatui-«?3 use but two grace signs, the ^ b e i n g much more prevalent and
probably associated with the term 'relish' and the Arbeing rather less
prevalent and probably associated with the term 'fall'.

It is quite possible that the 'fall' represented a class of graces


just as the relish did, with the appoggiatura from below being only one
member. As the relishes are presumed here to be all of the old graces
that started on the main note or the upper auxilliary, the falls would be
the new graces that start below the main note. A most probable member
of this class is the conjunct double appoggiatura from below (a scalewise
slur up to the note from a third below). Donington calls this grace an
•ascending slide' and illustrates its currency in Italy around 1600 by
mentioning its description in 1594 by Bovicelli (which involves the first
note being held) and in 1602 by Caccini (who deplored its extensive use
with the first note held, suggesting that the first note should be "but
lightly touched"). Perhaps a repeated appoggiatura from below could be
another member of this class. The turn from below could also be a mem-
ber if it was considered a grace in its own right, or it could have been
considered a compound grace, one of the many combinations of a type of
fall followed by a relish.

In this paper I shall use the term "fall" to denote both a class of
graces (especially with respect to notation) and a specific grace
(appoggiatura from below). I expect that this attempt at imitating early
usage does not lead to more confusion than my attempts to express the
ideas here in modern language.

Dowland
•*
The Dowland translation of 1610 (10) of the instructions by
Besardus (originally published in 1603) mentions graces once, in a
statement explaining why they are not described. The terminology used
is "sweet relishes and shakes". On first sight this terminology seems
inconsistent with that of Robinson since Robinson's shake was a type of
relish. But it is quite possible that the distinction was between "sweet
relishes" and "shakes". Robinson wrote (p. Cv) ". . . either a strong
relysh for loudness, or a milde relysh for passionate attencion. "
Different types of relishes could have had different emotional connotations
(as was mentioned by Simpson much later), and a shake (perhaps Mace's
hard shake) may have been the main "strong relysh" and other graces
could have served as "sweet relishes" (Dowland) or "milde relysh£esj"
(Robinson).

The above discussion of Robinson's and Dowland's comments


concerning graces is not consistent with what I wrote in Comm 359, and
is intended to replace them. This change does not materially affect the
argument presented there, which I still subscribe to.

English Manuscript Tablatures

As stated above, Robinson's separation of graces into relishes


and falls has a ready parallel in the manuscript tablatures that use two
grace signs. We shall assume that Robinson's terminology was general
in the very beginning J>f the 17th century. In those tablatures using only
one sign, this sign could well represent the relish family of graces. In
those that use more than two grace signs, it seems reasonable to expect
that the grace category of 'relish' was split into components. These might
still often represent sub categories rather than specific graces. Of
course, new signs will also have been used for new graces.

As a logical consequence of Dowland's distinction mentioned


above, later manuscripts often separated shakes, particularly long
shakes, from the other relishes. In the following two examples, the
shakes retained the # sign. These are the tables of graces in the Downes
ms. of c. 1615 (16) and in the Board Book of c. 1625 or 1630 (12). The
other graces in the Downes ms. are the 'falle' (with the X sign), the
•relish' and the 'tast* (the signs for the last two are illegible). All
except the 'tast* are clear enough. The 'tast' could well be the 'tasto' or
acciaccatura, which is executed by simultaneously playing the main note
(usually on an open string) and the appoggiatura from below to that same
note but on another string. This lovely grace, which starts with a clash
and resolves on a unison, was hardly ever specifically notated in lute
music this early in the baroque, perhaps because it was considered as a
55
type of fall.

In the Board Book table, the fall category is r e p r e s e n t e d by a


•fall forward 1 with the sign ( . A ' s l i d e ' is listed, notated by a curved
slur line under the notes played with one right-hand pluck. I have been
following Donington in using the t e r m 'slide* for t h r e e slurred scalewise
notes, but the Board Book usage includes not only t h e s e but Only two notes
a s well, and not always in s c a l e w i s e relation. The Board Book notation
is a way of writing out any g r a c e . The g r a c e s so written out include the
a
P P ° g g i a t u r a from above (but with the initial auxilliary note with s o m e t i m e s
equal and s o m e t i m e s m o r e time than the final main note), the appoggiatura
from below (with equal t i m e for the two notes), the ascending slide (with
the final note longer than the other two) and the descending slide ( a
s c a l e w i s e s l u r from a t h i r d above; both with equal t i m e for all t h r e e notes
and with the first note held much longer than the other two).

Of the other g r a c e s in the Board Book table, the 'long shake'


r e p r e s e n t e d by ifchas already been mentioned. The 'pul back' r e p r e s e n t e d
by ) i s most probably the n o r m a l appoggiatura from above with a very
short initial auxilliary note. T h e r e is only one m o r e relevant entry in the
table r e p r e s e n t e d by + . We would expect it to r e f e r to at least the major
r e m a i n i n g types of r e l i s h : the short shake and the lower mordent. The
table entry s t a t e s " to beat downe ti.afinger with a shake". This can
r e a d i l y be construed to r e p r e s e n t these two g r a c e s , but other i n t e r p r e t -
ations a r e obviously possible and have been made. Since the sign a p p e a r s
once a s s o c i a t e d with a note on an open string, an interpretation exclusively
in t e r m s of a g r a c e with a lower auxilliary is not tenable without
postulating that the s c r i b e made a m i s t a k e .

T h e r e a r e s e v e r a l e x a m p l e s of two g r a c e signs applying to the


s a m e t a b l a t u r e l e t t e r . T h i s most probably m e a n s two g r a c e s to be /
applied in tandem. When one g r a c e follows another, if one thinks in
t e r m s of how the action of each finger c o n v e r t s the previous note to a new
note, the first note of the second g r a c e would have to duplicate the final
note of the first g r a c e . On the other hand, if one thinks of the overall
sequence of notes a s the sum of the sequences defined by the component
g r a c e s , this overlap will not occur. Thus a turn from below would be
the sum of an appoggiatura from below followed by an upper mordent
according to the first view, or followed by an appogg iatura from above
according to the second. Mersenne (15) s e e m s to have taken the second
view when d e s c r i b i n g t h i s g r a c e as part of the seventh in his list (see
below). My suspicion is that this is the relevant view for i n t e r p r e t i n g
the tandem g r a c e s in English t a b l a t u r e s .

In the usual c i r c u m s t a n c e when this combination of g r a c e s o c c u r s


on a long note, the second g r a c e is probably some type of long shake
(taking R o b i n s o n ' s advice). Since the first g r a c e most probably ends on
the m a i n note, the shake would s t a r t on the main note according to the
first view above, and on the upper auxilliary according to the second.
56

In her a r t i c l e on g r a c e s (2), Poulton mentions a g r a c e sign looking


like a comma that " O c c u r s in a limited number of p i e c e s in[B. L.] Add
38539 [ s o m e t i m e s called the Sturt M S ] , always on a note immediately
preceded by the note above. Often o c c u r s in fairly fast r u n s . " She has
r e m a r k e d (11) that this context fits the c r i t e r i a for the use of the upper
mordent that I presented in Comm 359. This is a very likely possibility,
but the short shake, as s e e m s to have been used by Capirola in this
context, cannot be ruled out. I think that it is possible that the special
symbol II that a p p e a r s in the Board Book (12) s i m i l a r l y could have
referred*lo an upper mordent.

A working hypothesis that I have been following when playing the


late 16th and e a r l y 17th century English r e p e r t o i r e , and against which
I have so far found no evidence, is that t h e r e w e r e p a i r s of g r a c e s that
always used the s a m e sign and w e r e considered equivalent and freely
exchangeable. The choice between them was largely one of fingering
convenience. One such pair is the appoggiatura from below and the
ascending slide. Another is the short shake and the lower mordent.

An equivalence between the appoggiatura from below and the


ascending slide may be behind M e r s e n n e ' s ' m i s t a k e ' by replacing the
f o r m e r by the l a t t e r while describing the execution of his eighth g r a c e
(see below).

In playing the English r e p e r t o i r e , I am most tempted to i n t e r p r e t


a fall sign as an ascending slide when the notated tablature l e t t e r is a
third above the open string. With the first note on the open string, this
g r a c e falls so easily under the fingers. This has led me to experiment
with the c o n v e r s e g r a c e in t h e few p i e c e s w h e r e a unique g r a c e sign is
almost always applied to the.open string and the various r e l i s h e s a r e
a l r e a d y otherwise notated or s e e m i n a p p r o p r i a t e . The descending slide
falls equally well under the fingers. The aforementioned inclusion of
this g r a c e amongst the written-out ' s l i d e s ' i n the Board Book t e s t i f i e s to
its aesthetic acceptability in England at that t i m e .

A note about the variety to be expected amongst shakes might be


in o r d e r h e r e . They could be either long or short (the l a t t e r with two
soundings of the upper auxilliary), they could s t a r t e i t h e r on the
main note or the upper auxilliary, the first note could be either
emphasized by being louder or being held for a longer t i m e or not (in
which c a s e it may be so fleeting that which note it is may not be
audibly obvious), and the speed by which the notes a r e produced may e i t h e r
stay constant or change in v a r i o u s p o s s i b l e ways (e. g. a c c e l e r a t i n g )
during the shake.

T h e r e is some question concerning how completely the notated


g r a c e s r e p r e s e n t the actual g r a c i n g h e a r d in a typical p e r f o r m a n c e . It
is quite possible that they w e r e often just a rough guide, with the s c r i b e
noting only what he c o n s i d e r e d was e s s e n t i a l to his i n t e r p r e t a t i o n . G r a c e s
could have been used at additional p l a c e s in the music but not notated
57

either because the context made their use obvious or their use with the
same basic interpretation varied from performance to performance.
Examples of the obvious could be L a phrase musically related to one
with already-notated graces 2. mordents on scalewise passages, 3. a
long shake to sustain a long note or 4. a "little touch or t e r k e " applied
almost unconsciously when the fingers happen already to be appropriately
positioned. We must also bear in mind that the other types of ornament-
ation such as time variation (e. g. dotted rhythms), division (especially at
cadences) and right hand devices (e.g. strums or arpeggiation) could
have been used to decorate passages in conjunction with or instead of
graces, and these could be equally annotated.

Other graces described in early 17th century French books

Nicolas Valet in his book published in 1620 (13) mentions a grace


marked by a double cross which was not included amongst the graces he
described in his earlier book of 1615 (14) and not described previously in
any source. This is a single-finger vibrato where the thumb leaves the
back of the neck and the hand violently oscillates along the fingerboard
direction. It must have instantly achieved immense popularity since
Mersenne in 1636 (15) when describing it, mentioned that it was overused
in former times (and by reaction underused at his time of writing). The
sign'.'; that appears in the Board Book and is elsewhere called a 'whip' ,
could easily b ^ t h i s grace.

Mersenne's book offers a new grace, but a look at his whole


catalogue of graces might be of interest here: He calls all graces
'tremblemens' including the fall, so the term when applied to a finger's
motion does not necessarily imply repetition. This contention is
supported by the grace he describes first, which has no name other than
'ordinary' (vulgairement tremblement). Details such as the placing of
the finger are carefully stated and 'tremblement' is used with reference
to its motion but the sequence of notes is never mentioned. He does
indicate that it has an upper auxilliary. Possibilities are shakes of all
sorts (except the close shake ) the appoggiatura from above and the upper
mordent. The appoggiatura from above must be included because there
is no place else for it and it was certainly in the repertoire since it is
described (with the name 'accent') as the beginning of the 'battement'. It
is unimaginable that shakes would not also be included in the first grace,
but the upper mordent is an open question. Mersenne's lack of distinction
between the shake and appoggiatura from above parallels Robinson's
before him and Mace's use of the same sign (for the backfall and shaked
backfall) afterwards.

Mersenne calls his second grace 'accent plaintif and h i s


description clearly indicates that it is a fall. His third and fourth graces
are called 'martlemens' and they turn out to be lower mordents, the
former with the lower auxilliary on the open string, and the latter with
it stopped. A repeated mordent cannot be ruled out. The fifth grace,
called 'verre casse' is the aforementioned violent vibrato. Mersenne's
58
sixth grace is the new one, and he mentions that it is more practical on
the violin than on the lute. It is called •battement' and it starts with an
appoggiatura from above followed by repeated rapid playing of the main
note with the right hand for the rest of the note's time. There is some
doubt as to whether this should be called a grace at all.

The seventh and eighth graces are unnamed and are combinations
of the others. The seventh is stated to be a combination of the second
and sixth, i.e. joining the accent (plaintif) to the battement. This amounts
to a fall and appoggiatura from above (= a turn from below) + battement
proper. The instructions for execution stop just before the battement
proper should start, but it is expected that the continuation would be
understood. The eighth and last grace is stated to be a combination of
the second (accent plaintif or fall)and the fifth (verre casse or violent
vibrato). The instructions for execution describe an ascending slide
rather than the appoggiatura from below given in the definition of the
accent plaintif.

There are some difierences between this review of Mersenne's


graces and the summary of them in Poulton's fundamental paper on graces.
These should be ironed out in due course. My French is not all that good
and I wouldn't mind being proved wrong.

Conclusion

In this paper I have attempted to review critically the information


I know of about graces on the lute in the Renaissance and early baroque,
and to speculate on how that information can be fitted into an overall view
of the development of gracing during that period. This view of gracing
practice during the period is. outlined in the diagram which follows.

Perhaps the informed speculation here that might attract the


widest interest is the association of the ubiquitous two grace signs in
c. 1600 English lute music (and perhaps harpsichord music as well) with
Robinson's fall and relish, each being a class of graces: the fall is the
new set which is characterized by beginning with an auxilliary note below
the main note and the relish is the old set which is characterized by
beginning with either the main note or an upper auxilliary. Various
writers have speculated on the interpretation of these signs in the past
and, using internal evidence from the music, suggested that they could
have meant particular members of these classes. It has been widely
held that these choices are not completely satisfactory in all contexts.
This problem vanishes in the hypothesis here , where the assunprion is
that the notation signifies classes of graces rather than particular ones.
Besides having some historical basis, this assumption is attractive
because the wide variety of graces involved makes understandable the
reluctance of contemporary authors to explain gracing practice in what
seems to us as a satisfactory way, and it provides the means for realizing
the richness and variety of performance contemporary accounts lead us
to expect.
59
P l a y e r s c e r t a i n l y need guidelines on early gracing p r a c t i c e s , and
t h i s is what I am t r y i n g to offer. Though much h e r e is of c o u r s e highly
s p e c u l a t i v e , a l t e r n a t i v e speculations, though easily possible, need
carefully to be evaluated by c o m p a r i s o n with the surviving h i s t o r i c a l
information. If the competing set of speculations is based on an attitude
t o w a r d s h i s t o r y that does not t r y to be objective, t h e r e is no b a s i s for
d i s c u s s i o n . If they a r e a s s o c i a t e d with an attempt to be objective, I
look forward to some fruitful c o r r e s p o n d e n c e .

Conjectural Chronology and F r e q u e n c y of Grace Usage

Grace Type 1500 1600

Shake Close C
Shake main A
Mordent lower B
Mordent upper >B C
Appoggiatura above A
Shake above >A
Turn above >B C
Appoggiatura below > B
Slide ascending >B
Turn below > c
Slide descending > C
Vibrato violent 7>B c

Key: > first popular use


A used very often in most pieces
B used moderately often in most p i e c e s
C used occasionally for special effects

ca 1600 r e l i s h includes first seven of list


60

REFERENCES

Gombosi, O. , "Compositione di M e s e r Vincenzo Capirola", (1955)


Societe de Musique d'Autrefois, N e u i l l y - s u r - S e i n e
2. Poulton, D. , E a r l y Music, 3/_2_, (April 1975), pp 107-114
3. Poulton, D. . Lute Society J o u r n a l , XII_ (1970), pp 23-30
4. Milano, F. da and B o r r o n o , P . B. , "Intavolatura di Lauto. . . " (1548),
Milan
5. Weyssenbach, R. , " T a b u l a t u r a uff die Lutten", (1550), Z u r i c h
6. Sancta Maria, T. de, " L i b r o llamado A r t e . . . "., (1565), Villadolid
(publication was delayed 8 y e a r s because of paper shortage).
7. Henestrosa, L. V. de, " L i b r o de Cifra . . . ", (1557), Alcala
8. Waissel, M. , "Lautenbuch Darinn. . . ", (1592), Frankfurt a. d. 0.
9. Robinson, T. , "The Schoole of Musicke", (1603), London; facs.of
Intro, in mod.edit. ed. L u m s d e n , D . , (1976), CNRS, P a r i s
10. Dowland,R., " V a r i e t i e of L u t e - L e s s o n s " , (1610), London; facs. edit.
ed. Hunt, E. , (1958), London
11. Poulton, D., P r i v a t e Communication
12. "The Board Lute Book" (ca. 1625), facs. edit.ed. Spencer, R. ,(1976),
Leeds
13. Vallet, N . , " P i e t a R o y a l l e . . . ", (1620), A m s t e r d a m
14. Vallet, N. , " S e c r e t u m M u s a r u m . . . ", (1615), A m s t e r d a m
15. Mersenne, M. , " H a r m o n i e U n i v e r s e l l e " , (1636), P a r i s ; Facs.edit.
e d . L e s u r e , F . , (1975), CNRS, P a r i s ; Eng. t r a n s l . by Chapman,
R. E . , (1957), The Hague

16. " Downes L y r a Viol Ms. " (B. L. Egerton m s , 2971); d i s c u s s e d by


Dart, T. , Galpin Soc. J. XIV(l961), pp. 30-33
61
FoMRHI Comm. 399 Jeremy Montagu
Review of: Peter & Ann Mactaggart, Laving & Decorating Harpsichord
Papers, Mac & Me Ltd, 19 Mill Lane, Welwyn, Herts, ALb 9EU,
1981, 18pp, 9 plates, £1.50 + p&p.
I owe Peter and Ann an apology for this; they gave me a copy at the
Horticultural Hall and I forgot about it till after I'd finished and
sent off the last Q.
They have produced, very concisely,a complete manual for do-it-your-
self Flemish decoration. The booklet is divided into three sections,
the first historical and descriptive, telling us what sort of decora-
tion was used, the second practical, telling us to do it, concentra-
ting on the papers and laying them onto the harpsichord, the third,
also practical, describing how to decorate on top of the paper,
adding the lines and mottoes, etc. Every process, tool and technique
is explained with exemplary clarity; there are recipes for paints,
pastes and varnishes. As the authors say in the preface, there is
no one 'right'way to decorate a harpsichord, but these ways described
here are tried and tested and known to work; these recipes are known
to produce certain results, and there are a number of warnings of
what will happen if you try various other ways and recipes.
If you are making 'Flemish' harpsichords and virginals and want to
do your own decorating, this book is a must. Not only is it as good
as I've said above, but the authors are the experts on the subject
and, as you probably know, they have recut the wood blocks necessary
to produce reproductions of the original papers, and many of them
are now available again from them.

FoMRHI Comm. 400 Jeremy Montagu


Review of: John Paul, Modern Harpsichord Makers. Victor Gollancz,
1981, 280 pp, plates, £15.50.
It's difficult to know how to head this review; is John the author
or the editor? He has written the first chapter, 'An introduction
to the harpsichord' and the lead into each subsequent chapter, but
all the rest is by the individual makers. Unlike Zuckermann's book
of similar coverage, this one lets each maker speak for himself.
The result is variable. From some one gets an insight into the
whys and wherefores of their work and their choice of instruments;
from others one gets little more than a string of words. Certainly
it is fascinating to know from Martin Huggett why he still believes
that William de Blaise was on the right lines, just as it is to
know from others that the old makers knew what they were doing and
that we do something else at our peril. Whether the result is
worth the rather high cost to those of you who read FoMRHIQ, I'm
not-at all sure — I think it's aimed at a rather different market.
Certainly it's worth looking at a copy and deciding for yourself,
and if you are interested in knowning more about your colleagues,
and in many cases fellow-members of FoMRHI, and their philosophy
as well as something of their techniques, then it's worth having
a copy.
The makers covered are: Arnold & Carl Dolmetsch, by Carl Dolmetsch;
John Barnes on plans and drawings, with a good list of what's avai-
lable from whom, which alone might make the book worth having;
Malcolm Rose; Andrea Goble (now the head of Robert Goble & Son);
Dave Law on the London College of Furniture, which is very inters-
ting in its descriptions of the College; John Rawson, thought-pro-
voking as always; Mark Stevenson, with a number of important
remarks, among vum: xo J.O...~.- supreme anachronism to go to the
lengths of playing music on the correct instrument for its epoque
and then to provide an instrument which has a sonority which the
composercould never have lived to hear." and an emphasis on the
fact that many of the original makers were very quick workers, putting
a carcase together in a matter of hours rather than days, and that
this radically alters the tensions built into an instrument; Dennis
Woolley: Trevor Beckerleg, with a strong preference for quill over
Delrin (it's interesting to meet in the same book a number of makers,
some of whom swear that they can't hear any difference between the
two and others who are convinced that there is all the difference in
the world) and stressing the importance of failure and making the
point that a number of instruments surviving today may have been con-
sidered failures in their own time - do we really know what were the
preferred criteria in any of the historical periods? - and also mak-
hg the point that most of theinstruments produced today "are not
ideally suited to the music of any of the major composers in the
repertoire"; Donald Garrod; Martin Huggett, already mentioned above
as a pupil and follower of de Blaise; John Morley; Robert Davies;
Ann Feldberg and Peter Whale and two of their colleagues, Timothy
Constable and Christopher Jones; Derek Adlam, with an emphasis on
precision and that"instrument making is engineering in wood";
William Mitchell; Richard Clayson & Andrew Garrett; Peter & Ann
Mactaggart on decorating of all periods, not only the Flemish style
covered by their book reviewed above; and John Paul himself.
Skimming through the book to write the above, and noting all the
passages I'd marked as especially interesting (not just the ones
quoted above), makes me think that I was unfair above and this is
a book that any keyboard maker should read. Indeed it could also
make makers of other instruments think again about what they are
doing and why they are doing it the way that they are. Perhaps we
need a whole series of books like this - The Modern Lute Maker,
Viol Maker, Recorder Makers and the rest.

FoMRHI Comm. 401 (see Comm.363) Jeremy Montagu


Review of: Lyndesay Langwill, A Check-list of the Double-Reed
Musical Instruments in the Edinburgh University Collec-
tion of Historic Musical Instruments, 1981, 8pp. £1.00.
A third in the series reviewed a couple of Qs ago. Like the pre-
vious ones, the descripitons are very summary, confined to the marks
and the number of keys etc. As before, however, if you want to
know where things are, such check-lists are essential material,
and if double-reeds are your line, write to the Reid School of Music,
Teviot Place, Edinburgh EH8 9AG for a copy. This one covers the
oboes, a few shawms and musettes as well, including d'amore and
cor anglais, and bassoons, and it includes as well (were they
double reed instruments? I thought that the whole point was that
they were single reeds) the Caledonica and the Alto Fagotto, the
former unique and the latter one of only two known.
63
FoMRHI Comm. 402 Jeremy Montagu
Review of: Jerome & Elizabeth Roche, A Dictionary of Early Music.
Faber & Faber, 1981, 208 pp, line drawings of instru-
ments, £2.95 paperback & £6.95 hardback.
For its size and its price this gives excellent coverage, especially
biographically, of music and musicians 'from the Troubadours to
Monteverdi'. It's no Grove, of course, but for those of us who
can't afford Grove but who still want to know who x or y were, it's
going to be very useful. Chris Page had a look at it for me and
says that he's reasonably happy about the musical and biographical
entries. I'm less happy about the instruments, especially about
the illustrations, a good many of which have been drawn, not from
contemporary sources, but from bad modern non-reproduction instru-
ments. Perhaps a modern dictionary should be realistic and recog-
nise the modern state of the art, but I don't really see why a
crumhorn should be shown with a key above the finger holes, and I
certainly object to a tenor recorder with a side-action key on an
axle between pillars and with finger holes dotted around from side
to side of the central axis. Nor do I see the relevance of a mod-
ern South Chinese shawm (captioned 'Oriental shawm') to that sub-
ject; we are agreed that the shawm 'came to Europe from the Saracen
armies during the Crusades' (for a small disctionary like this,
that's near enough, without worrying about other possible lines of
transmission), but that the Crusaders got as far as Canton is a new
one on me.
While they seem to bow to Laurie Wright's reversal of gittern/citole
nomenclature, the Instrument illustrated under gittern seems to be
an attempt at drawing what used to be called a gittern before GSJ 30
appeared, ie a citole. And heaven knows where they got the naker
picture from, especially the beaters. Some of the descriptions are
debatable too. Every picture of chime bells I can think of off
hand shows them with clappers, not 'tongueless' and they are nor-
mally shown clouted with carpenters' hammers, not 'small beaters'.
The mute cornett is described, but the straight ordinary cornett
is ignored. Could one say that the curtal had a 'widely-expanding
conical bore'? I can't see how a horn can be described as having
a cylindrical bore; how did it fit over the core on the animal's
head if it had? Nor why it is described as having 3 finger holes;
there aren't many medieval pictures of finger-hole horns, but those
that I know show more holes than that, and they were combined (which
we don't know) with hand-stopping as in Sweden more recently, even
if there were only three holes, they could produce moi e than six
notes. I wouldn't mind knowing the evidence for the statement that
the 16th century trumpet was normally pitched in D; admittedly I
don't know any 16th c scores with trumpet parts written a tone lower
than the rest of the music, but the score of L'Orfeo, a century
later, seems to suggest C as the key.
Most of the instrument articles are so short that there isn't much
room for debatable points (though the 7-lineclaviorganum manages
two: was it experimental and were its tuning problems intractable?);
longer entries, eg bagpipe (how do we know the mouthpipe had a non-
return valve - many players today use their tongue - or that there
were 8 finger holes, and why did its continuous sound 'make it more
sutiable than other wind instruments for dance music'?), drums and
percussion, manage to include rather more.
It's still well worth buying a copy if you want a quick reference
for musicians and composers, for which it'll be a very useful
handbook.

You might also like