Scribd
Upload
61 views1 page

Member Design Eurocode-Macau

This document summarizes the beam design of a BH100x100x20x20 beam according to the Macau Code 29/2001. The beam was designed to resist an axial force of 85kn, a bending moment of 30kn-m, and a shear force of 300kn. The material properties and cross section dimensions are provided. Calculations are shown for checking the beam's resistance to axial force, bending, shear, and lateral torsional buckling according to clauses in the code. All capacity checks were passed successfully.

Uploaded by

chirathip vasuvattakul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views1 page

Member Design Eurocode-Macau

This document summarizes the beam design of a BH100x100x20x20 beam according to the Macau Code 29/2001. The beam was designed to resist an axial force of 85kn, a bending moment of 30kn-m, and a shear force of 300kn. The material properties and cross section dimensions are provided. Calculations are shown for checking the beam's resistance to axial force, bending, shear, and lateral torsional buckling according to clauses in the code. All capacity checks were passed successfully.

Uploaded by

chirathip vasuvattakul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Beam Design according to Macau Code 29/2001

Beam Mark ECTIE-BH100x100x20x20 (Modified from BH125x125x20x20)


Design Force Material Properties
NEd MEd VEd Fy E e
γm0
(kn) (kn-m) (kn) (n/mm2) (n/mm2)
85 30 300 355 200000 0.814 1.1

Section H B t1 t2 r weight A Ix Iy Wel,x Wel,y Wpl,x Wpl,y rx ry


(mm) (mm) (mm) (mm) (mm) (kg/m) 2
(cm ) (cm )
4 4
(cm )
3
(cm )
3
(cm )
3
(cm )
3
(cm ) (cm) (cm)
BH100x100x20x20 100 100 20 20 0 40.8 52 689 337 138 67 178 106 3.6 2.5

Cross-section classification …Clause Article31 ( Table 14)


Cf/Tf = 2.00 < 10 e Cw/Tw = 3.00 - e
Overall class flange class web class(M) web class(N)
1 1 - 1

Axial Force Resistance …Clause Article 32


Nc,Rd = A Fy / γm0 1678.18 KN
Nc,Rd (for class4) -
NEd/Nc,Rd = 0.05 < 1 OK!

Bending Resistance …Clause Article 34


Mc,Rd = Wpl,x Fy / γm0 = 57.45 KN-m
MEd/Mc,Rd = 0.52 < 1 OK!

Shear Resistance …Clause Article 35


Av = H t1 = 2000 mm2
Vpl,Rd = Av ( Fy / 3 ) / γm0 = 372.65 KN
VEd/Vpl,Rd = 0.81 <1 OK!

Shear Buckling Check …Clause Article 40


69e = 56.14
hw/tw = 5.00 < 69e No shear buckling check required

Combined bending and shear …Clause Article 36


2
r = (2Ved /Vpl,Rd - 1) = 0.372
My,v,Rd = (Wpl,x - rA2v /4 t1) Fy / γm0 = 51.44 KN-m
MEd/Mc,Rd = 0.58 < 1 OK!

Lateral Torsional Buckling Check …Clause Article 39


Unbraced length (L) = 1 m
Shear modulus (G) = 81000 N/mm2
Torsion constant (It) = 800000 mm4
Warping constant (Iw) = 5.397E+09 mm4
C1 = 1.1
c1 π2 E Iy Iw L2 G It
Elastic buckling moment (Mcr) = L2
( + 2
Iy π E Iy
) = 779.70 KN-m

Wx Fy
Mcr
Non-dimentional lateral torsional slenderness (λLT) = = 0.28
Imperfection factor (αLT) = 0.34 Ref. Table3.8,6.1( EN1993-1-1)
∅LT = 0.5( 1 + αLT (λLT - 0.2) + λLT2 ) = 0.55

You might also like