R Motor Encoder

P EM Brake and Temp Sensor

inc. duplex for 4 way Amp Superseal 4 way Rubber boot
(Mfr p/n = 493581-1
150mm Motion Bleeper (Mfr p/n = 282088-1
2 way Amp Superseal
(Mfr p/n = 282080-1
Q Strobe and Bleeper
RS = 314-1211)
2 way Amp Superseal
RS = 679-7132)
2 way Rubber boot
RS = 314-1198) 2 way Molex minifit 2 way Molex minifit (Mfr p/n = 282080-1 (Mfr p/n = 880810-1

W Outputs from
2 way Rubber boot Molex 39-01-2021 Molex 39-01-2021 RS = 314-1198) RS = 366-2061)

O Lift/Lower Hydraulic. V Outputs from

(Mfr p/n = 880810-1

Used to drive direction

RS = 366-2061) switch B and B-
No connector
S Main Contactor
switch A and B-
solenoid harness inc. start
A 4 way Molex plug
(Molex - 39-01-2041) solenoid (MM P/N 014-08700)
No connector. Isolate the
2 x 1/4" Female locking
terminals - shroud
Spare switch ends of cover Black
supply, (PP007-040) In addition to contactor harness branches V & W
3 core B lack
battery + after CRIMP PINS (MM P/N 014-08800) 150mm Cable with heat shrink.
K/S with (Molex - 39-00-0041)
two outputs (PP007-080) 6 way Molex minifit
(Molex - 39-01-2061)
2 core B lack 1900mm
250mm 2 core B lack Flat Cable 3 core B lack
Branch
B 4 way Molex plug
(Molex - 39-01-2041)
Branch Flat Cable
1140mm 300mm
Cable
200mm 6 core
2 core Black
Spare switch
Branch Branch Flat Cable
supply, (PP007-040) Branch Screened
battery + after CRIMP PINS cable 450mm
K/S with (Molex - 39-00-0041) Branch
two outputs (PP007-080)
1300mm
G Key switch H Horn Branch

C
3 way Molex minifit 2 x 1/4" Female locking
Socket Plug 1 x 1/4" Female locking terminals - shroud
PP007-274 terminals - shroud
Fast a nd Slow cover black
(Hare /Tortoise) Molex Pt No. 39-01-4036
cover Black. 1 x Insulated 50mm
pin terminal.
N Traction Controller
Pins IN4007
PP007-080
200mm Branch
Diode
Molex Pt No. 39-00-0041 2 core B lack

I Interlock 1350mm Branch Flat Cable

1234
2 core B lack
Flat Cable
2 x 1/4" Female locking
D
Lift and
4 way Molex plug
(Molex - 39-01-2041)
Automotive Blade
fuse with Lid
1amp fuse
terminals - shroud
cover Black
2 core B lack
300mm Branch Flat Cable
(PP007-040)
Lower CRIMP PINS
(Molex - 39-00-0041) 35 PIN Amp Wedge
(PP007-080) PLUG (Amp -776164-1)
Suggested Label 18 core JZ (PP007-217)
Position Flexi Cable CRIMP SOCKET
1450mm B ranch to (Amp - 770854-3)
E
2 way Molex minifit
end of connectors 150mm PP007-218
Socket Plug 1900mm Branch
H orn PP007-046
250mm Branch Branch 1 core B lack
Button Molex Pt No. 39-01-2021
400mm
Pins
PP007-080 T Curtis Keypad 300mm
Branch 0.75mm
Branch Black
0.75m m Cable
200mm
Molex Pt No. 39-00-0041 0.75mm Branch
300mm Non terminated
Branch
10 way Molex minifit Y Charger interlock
F Socket Plug
Throttle PP007-269 6 way Molex minifit
B- input disables
drive (pot 2 input)

M N egative
Molex Pt No. 39-01-2101 (Molex - 39-01-2061) Isolate the
U 2 X Keypad Relay
Automotive Blade
Pins fuse with Lid ends of
PP007-080 M8 Ring Terminal branches X & Y
A+B
10amp fuse
Molex Pt No. 39-00-0041 with heat shrink.
8 x 1/4" Female locking

L Program m er Port
3 core B lack
K G auge
terminals - shroud
cover Black Flat Cable
8 way Molex Receptacle 200mm
NOTES 4 way Molex plug
(Molex - 39-01-2080) (Molex - 39-01-2041)
Branch

J Positive
Supply Looms individually Bagged
X Auxillary input
(PP007-001) (PP007-040)
Label each Loom with Curtis Item No.

DO NOT SCALE
CRIMP SOCKETS CRIMP PINS
and Revision Status and Batch code. M10 Ring Terminal (Molex - 39-00-0039) (Molex - 39-00-0041) device, includes
Label the following branches with its function (PP007-002) (PP007-080) B+ after K/S, B- and
Branches H , I , S , U(a+b), V , W , X , Y + Z 24V input to controller

The Design and Technical

information appearing on this
Revision History Initial Drawn By MATERIAL
Curtis Instruments UK Ltd
Title: Harness AC Standard Tug
drawing is the property of REV ECN DATE BY Change / Update PD 0.5mmSQ
5 upper Priory Street
Curtis Instruments UK Ltd
and is disclosed in confidence.
D -- 25th Jun 2012 PY Move 1 Amp blade fuse to branch G. Date 6th Sept 2011
unless stated
otherwise Northampton for MM Truck 014-08000
Tel: 44 (0) 1604 629755
It is not to be copied, reproduced,
revealed to or appropriated by
E -- 28th Jun 2012 PY Isolate the ends of branches V,W,X & Y Checked By Tolerance unless Fax: 44 (0) 1604 629876 Schematic drawing
others, either in whole or in part
without the express written consent
of Curtis Instruments UK Ltd
F
F
17/10/13
20/11/13
DE
DE
Change branch R & P to have AMP seal connecters
No change to harness, change to schematic
Date
PH
6th Sept 2011
otherwise stated

+/- 10mm
cURTIS [email protected]
www.curtisinst.co.uk Drg. No: 18427095-01 (Item 18427095)