Scribd
Upload
62 views1 page

RF-42 SMS Codes

This document contains SMS commands and descriptions to configure settings for a GPS tracking device. Some of the commands include setting emergency contacts, turning GPS and indicator lights on/off, configuring alert methods, setting vibration and sound alarms, and rebooting or factory resetting the device.

Uploaded by

a100b100
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

RF-42 SMS Codes

This document contains SMS commands and descriptions to configure settings for a GPS tracking device. Some of the commands include setting emergency contacts, turning GPS and indicator lights on/off, configuring alert methods, setting vibration and sound alarms, and rebooting or factory resetting the device.

Uploaded by

a100b100
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RF-V42 SMS Command Command Function

pw,123456,center,number# ********** has been set for the master number Successfully
sos2,number# Emergency contact number 2 has been set successfully
sos3,number# Emergency contact number 3 has been set successfully
sos4,number# Emergency contact number 4 has been set successfully
gprsgps,0# Close GPS positioniong,only GSM standby
gprsgps,1# Open GPS positioniong(default)
Change the SMS language to English, the first digital is for
lz,0,8# language,
1 is Chinese,0 is English. the second digital is for timezone
url# Check the location
upload,digital# Set interval of the position data upload the unit is second
led,1# Turn on the indicator light
led,0# Turn off the indicator light
Has closed the anti harassment function, please be careful to
dnd,1#
use
dnd,0# Has opened the anti harassment function
The device is in hands-free push-to-talk (PTT) mode
ans,0#
currently
The device is in auto-answer (hands-free) monitoring mode
ans,1#
currently
ans,2# The device is in silent monitoring mode currently.
pic,1# Taking the picture
sosp,1# It will take picture when SOS
sosp,0# It will not take picture when SOS
mod,0# The alert send to APP only
mod,1# The alert send to APP,SMS and then call
mod,2# The alert send to APP, and call
mod,3# The alert send to APP,SMS
ts# check the device information
lsn,0# LED light induction has been closed
lsn,1# LED light induction has been started
von,1# Level 1 vibration sensor alarm ON
von,2# Level 2 vibration sensor alarm ON
von,3# Level 3 vibration sensor alarm ON
von,4# Level 4 vibration sensor alarm ON
von,0# Vibration sensing alarm function is closed
non,1# Sound sensing alarm function is opened
non,0# Sound sensing alarm function is closed
fon,0# Fall down alarm OFF
Fall down alarm ON,please wear this device correctly incase
fon,1# of misalarm.
which will affect standby time
reboot# The device will be reboot soon
factory# The device will power off after 30s
apn,apndata,username,password,plmncode# Configure the apn setting

You might also like