Scribd
Upload
109 views2 pages

Plug in The Adapter: This Manual Explains How To Install and Configure The USB To Bluetooth Adapter On Your Windows

1. Plug the USB-to-Bluetooth adapter into a USB port on the Windows PC. Windows will install the necessary drivers. 2. Open the Bluetooth Devices window and click "Add..." to begin the pairing process. 3. The Add Bluetooth Device Wizard will scan for nearby Bluetooth devices. Select the adapter, enter the passcode "1234", and finish the wizard to complete setup. The adapter will now be available as a Bluetooth device on the PC.

Uploaded by

Verneti
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
109 views2 pages

Plug in The Adapter: This Manual Explains How To Install and Configure The USB To Bluetooth Adapter On Your Windows

1. Plug the USB-to-Bluetooth adapter into a USB port on the Windows PC. Windows will install the necessary drivers. 2. Open the Bluetooth Devices window and click "Add..." to begin the pairing process. 3. The Add Bluetooth Device Wizard will scan for nearby Bluetooth devices. Select the adapter, enter the passcode "1234", and finish the wizard to complete setup. The adapter will now be available as a Bluetooth device on the PC.

Uploaded by

Verneti
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Windows XP/Vista: Installing USB to Bluetooth Adapter

Introduction The Add Bluetooth Device Wizard will appear: The Wizard will connect to the scan tool, and
exchange passkeys:
This manual explains how to install and configure
the USB to Bluetooth adapter on your Windows
XP or Windows Vista PC.

1. Plug in the Adapter


Plug the USB-to-Bluetooth Adapter into any
available USB port. Windows will locate and
install the drivers.
Check the My Device is set up and ready to be
Once the passkeys are exchanged the wizard will
2. Set up the Bluetooth Connection found check box, then click the Next > button.
display the COM port numbers:
Locate the “Bluetooth Devices” icon in the The Wizard will search for and display Bluetooth
system tray: devices within range:

Double-click the icon.

If the icon does not appear in the system tray,


remove and re-insert the USB-to-Bluetooth Write down the number of the outgoing COM port,
adapter. you may need it later to configure the diagnostic
software.
The Bluetooth Devices window will appear:
Click on the ScanTool.net-XXXX icon, then click
the Next > button. Click Finish.

You will be asked to enter your passkey: The wizard will close and you should see
ScanTool.net-XXXX under the All other devices
view:

Select the Use the passkey found in the


documentation: radio button. Enter 1234 in the
text box then click Next >
Click the Add… button. Click OK to complete setup process.
Windows 7: Installing USB to Bluetooth Adapter
Introduction The Select a device to add to this computer The Enter the pairing code for the device dialog
dialog will appear: will appear:
This manual explains how to install the USB to
Bluetooth adapter on your Windows 7 PC.

1. Introduction Plug in the Adapter


Plug the USB-to-Bluetooth Adapter into any
available USB port. Windows will locate and
install the drivers.

2. Set up the Bluetooth Connection


Locate the Show hidden icons arrow in the Enter 1234 into the text box then click the Next
system tray: button.

The This device has been successfully added


to this computer dialog will appear:
Click the icon.
Click on the ScanTool.net-XXXX icon, then click
The Notification Area will appear: the Next button.

The Select a pairing option dialog will appear:

Click the Close button to complete the Add


Double-click the Bluetooth icon. Bluetooth device process.
The Bluetooth Devices window will appear:

Click Enter the device’s pairing code.


Click Add a device. Click the ‘X’ button to close the dialog.

You might also like