BE VIII SEMESTER

COURSE CONTENTS
EE-8001 H.V. Engineering L T P Max. Min.
Marks Marks
Duration 3 1 2 70 22
in hrs.

Course Objective:

UNIT – I :Insulation in power system:

General characteristics of gases, liquid and solid insulators. Mechanism of break down of gases, basic process
of ionization in a gas. Discharge in uniform field. Townsend’s and streamer theory, paschen’s law, discharge in
non uniform field, effect of polarity, effect of wave shape of impressed voltage on the breakdown strength, time
of discharge, corona discharge on the conductor of transmission line. Mechanism of breakdown in liquids,
suspended particle, suspended water and cavitations breakdown. Mechanism of breakdown in solids: intrinsic
and electromechanical, breakdown due to treeing and tracking, thermal breakdown. Electrochemical
breakdown.

UNIT – II :Production and measurement of high voltage:

methods of production of power frequency high voltage: cascade transformers and resonance methods.
Generation of high voltage D.C., voltage stabilization tesla coil.
Principal of generation of impulse voltage. Standard impulse voltage. Analysis and control of simple circuit of
impulse generators, various methods for measurement of high voltage A.C., D.C. and impulse voltage.

UNIT – III :Testing:

Objectives and methods at preventive testing of insulation, measurement of insulation resistance of cables,
measurement of tanδ and high voltage capacitance as a method of preventive testing, high voltage Schering
bridges of insulation. Measurement of breakdown strength of transformer oil. Partial discharge in an insulation
and method of its detection, preventive testing of line substation, transformers and cables.

UNIT – IV :Over voltages and insulation coordination:

over voltages in transmission system. Lightning, switching and temporary over voltages. Traveling waves on
transmission systems, their shape, attenuation and distortion, effect of junction and termination of propagation
of traveling waves, basic impulse insulation level (BIL) and its selection and significance, Control of lightning
and switching over voltages. Basic principle of lightning arrestors. Characteristics of lightning arrestors,
selection of arrestor rating: coordination of protective device with apparatus insulation.

UNIT – V :EHV AC & DC transmission:

Constitution of EHV A.C. & D.C. links, kinds of D.C. links, limitation and advantages of A.C. and D.C.
transmission. Trends in EHV AC and DC Transmission, surge impendence and surge impedance loading,
voltage profile of loaded and unloaded extra long distance line along the line. Power handling capacity of lines,
series and shunt compensation of extra long distance lines. Tuned power lines, problems of extra long,
compensated lines. FACT devices concept and applications, principle applications of A.C. and D.C.
transmission.

References-
1. C.L. Wadhwa, High voltage engineering New age international publishers.
2. L.V. Bewley’s traveling waves on transmission system, Wiley Newyork.
3. Begmudre EHV AC transmission.
4. Kimbark, HVDC transmission.
5. S. Rao, EHV AC & DC transmission.
6. Arrilaga HVDC transmission
7. Podiyar, HVDC transmission.

COURSE OUTCOMES: At the end of the course student will be able

to:
CO1
CO2
CO3
CO4
CO5

Mapping of Course outcomes (COs) with Program outcomes(POs):

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Outcomes
CO1
CO2
CO3
CO4
CO5

List of Experiment

1. Study of sphere gap set.

2. Study of cable test set.
3. study of Tanδ set.
4. Study of transformer oil test set.
5. Measurement of high voltage with sphere gap.
6. Measurement of insulation resistance at cable.
7. Measurement of Tanδ.
8. Measurement of dielectric strength of transformer oil.
 BE VIII SEMESTER
COURSE CONTENTS
EE-8001 Utilization of Electrical Power L T P Max. Min.
Marks Marks
Duration 3 1 0 70 22
in hrs.

Course Objective:

UNIT – I :Insulation in power system:

General characteristics of gases, liquid and solid insulators. Mechanism of break down of gases, basic process
of ionization in a gas. Discharge in uniform field. Townsend’s and streamer theory, paschen’s law, discharge in
non uniform field, effect of polarity, effect of wave shape of impressed voltage on the breakdown strength, time
of discharge, corona discharge on the conductor of transmission line. Mechanism of breakdown in liquids,
suspended particle, suspended water and cavitations breakdown. Mechanism of breakdown in solids: intrinsic
and electromechanical, breakdown due to treeing and tracking, thermal breakdown. Electrochemical
breakdown.

UNIT – II :Production and measurement of high voltage:

methods of production of power frequency high voltage: cascade transformers and resonance methods.
Generation of high voltage D.C., voltage stabilization tesla coil.
Principal of generation of impulse voltage. Standard impulse voltage. Analysis and control of simple circuit of
impulse generators, various methods for measurement of high voltage A.C., D.C. and impulse voltage.

UNIT – III :Testing:

Objectives and methods at preventive testing of insulation, measurement of insulation resistance of cables,
measurement of tanδ and high voltage capacitance as a method of preventive testing, high voltage Schering
bridges of insulation. Measurement of breakdown strength of transformer oil. Partial discharge in an insulation
and method of its detection, preventive testing of line substation, transformers and cables.

UNIT – IV :Over voltages and insulation coordination:

over voltages in transmission system. Lightning, switching and temporary over voltages. Traveling waves on
transmission systems, their shape, attenuation and distortion, effect of junction and termination of propagation
of traveling waves, basic impulse insulation level (BIL) and its selection and significance, Control of lightning
and switching over voltages. Basic principle of lightning arrestors. Characteristics of lightning arrestors,
selection of arrestor rating: coordination of protective device with apparatus insulation.

UNIT – V :EHV AC & DC transmission:

Constitution of EHV A.C. & D.C. links, kinds of D.C. links, limitation and advantages of A.C. and D.C.
transmission. Trends in EHV AC and DC Transmission, surge impendence and surge impedance loading,
voltage profile of loaded and unloaded extra long distance line along the line. Power handling capacity of lines,
series and shunt compensation of extra long distance lines. Tuned power lines, problems of extra long,
compensated lines. FACT devices concept and applications, principle applications of A.C. and D.C.
transmission.

References-
8. C.L. Wadhwa, High voltage engineering New age international publishers.
9. L.V. Bewley’s traveling waves on transmission system, Wiley Newyork.
10. Begmudre EHV AC transmission.
11. Kimbark, HVDC transmission.
12. S. Rao, EHV AC & DC transmission.
13. Arrilaga HVDC transmission
14. Podiyar, HVDC transmission.

COURSE OUTCOMES: At the end of the course student will be able

to:
CO1
CO2
CO3
CO4
CO5

Mapping of Course outcomes (COs) with Program outcomes(POs):

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Outcomes
CO1
CO2
CO3
CO4
CO5

List of Experiment

9. Study of sphere gap set.

10. Study of cable test set.
11. study of Tanδ set.
12. Study of transformer oil test set.
13. Measurement of high voltage with sphere gap.
14. Measurement of insulation resistance at cable.
15. Measurement of Tanδ.
16. Measurement of dielectric strength of transformer oil.
 BE VIII Semester ELECTRICAL Engg.
COURSE CONTENTS (UEC SCHEME)
EE-8002 Utilization of Electrical Power L T P C Max. Marks Min. Marks
Duration 3 Hours 3 1 0 4 100 35
UNIT - I
Illumination Engineering: Nature of light, units, sensitivity of the eye, luminous efficiency, glare. Production of
Light; Incandescent lamps, arc lamps gas discharge lamps- fluorescent lamps-polar curves, effect of voltage
variation on efficiency and life of lamps, Distribution and control of light, lighting calculations, solid angle,
inverse square and cosine laws, methods of calculations, factory lighting, flood lighting and street lighting,
Direct diffused and mixed reflection & transmission factor, refractors, light fittings. LED light, Sodium Vapour
lamp & CFL.
UNIT - II
Heating, Welding and Storage Devices: Electrical heating-advantages, methods and applications, resistance
heating, design of heating elements, efficiency and losses control. Induction heating: core type furnaces, core
less furnaces and high frequency eddy current heating, dielectric heating: principle and special applications,
arc furnaces: direct arc furnaces, Indirect arc furnaces, electrodes, design of heating elements, power supply
and control. Different methods of electrical welding, resistance welding, arc welding, energy storage welding,
laser welding, electro beam welding, and electrical equipment for them. Arc furnaces transformer and welding
transformers. Storage devices, dry and wet batteries, battery charging circuits.
UNIT - III
Traction: Special features of Traction motors, Different system of electric traction and their Advantages and
disadvantages, diesel electric locomotives. Mechanics of train movement: simplified speed time curves for
different services, average and schedule speed, tractive effort, specific energy consumption, factors affecting
specific energy consumption, acceleration and braking retardation, adhesive weight and coefficient of
adhesion.
UNIT – IV
Traction Motors: DC motors, single phases and three phases motors, starting and control of traction motors,
braking of traction motors: plugging, rheostatic and regenerative braking, Modern 25 KV A.C. single phase
traction systems: advantages, equipment and layout of 25 KV, line and current selection, single phase power
frequency A.C. traction.
UNIT - V
Electric Drive Applications: Individual and collective drives- electrical braking, plugging, rheostatic and
regenerative braking load equalization use of fly wheel criteria for selection of motors for various industrial
drives, calculation of electrical loads for refrigeration and air-conditioning, intermittent loading and temperature
rise curve.
Text Books:
1. Tailor, E.O., Utilization of Elect. Energy.
2 H. Pratap, Art and Science of Utilization of Electrical Energy.
Reference Books:
4. Garg, G.C., Utilization of Elect. Power and Elect. Traction.
5. N V Suryanarayan, Utilization of Elect. Power including Electric Drives and Elect. Traction, New Age
International.
6. Hancok N N, Electric Power Utilization, Wheeler Pub.
 BE VIII Semester ELECTRICAL Engg.
COURSE CONTENTS (UEC SCHEME)
EE-8003 Power System Protection L T P C Max. Marks Min. Marks
Duration 3 Hours 3 1 2 6 100 35

Unit - I
Relay: Philosophy of protective relaying system, Characteristics of relay, zones of protection, construction
realization of characteristics of different relays- Electromagnetic attraction and induction type relays, Buchholz
relay, differential relay, distance relay.
Unit - II
Apparatus protection: Types and detection of faults and their effects, generator protection, power transformer
protection, bus-bar protection, Feeder protection
Unit - III
Fundamentals of switchgear: Theory of current interruption, arc phenomenon, energy balance theory, arc
quenching restricting voltage and recovery voltage, RRRV calculations, L.T. switchgear- basic definitions,
types of fuses, HRC fuse , construction and applications.
Unit - IV
Classification of switchgear: Different types of circuit breakers, bulk oil and minimum oil circuit breakers, air
break and air blast circuit breaker, SF 6 circuit breaker, vacuum circuit breaker, rating selection and testing of
circuit breaker.
Unit - II
Modern trends in protection: static relays, advantages and limitations of static relays, static amplitude and
phase comparators, level detector, logic and training circuits, static over current, directional, distance relay,
numerical over current and distance protection, microprocessor and computer based protection schemes.
List of Experiments:
Operating Characteristics of
1) Over Voltage Relays
2) IDMT Relays
3) Percentage based differential relays
4) Determination of instantaneous relays
5) Buchholz relays
6) Solid state over current relays
References Books:
1 Van A. R & Warrington C., “ Protective Relays : Their Theory and Practice”, Vol 1 & 2, Chapman and Hall.
2. Paithankar Y. O.,” Transmission Network Protection: Theory and Practice”, Marcel Deicker, Inc.
3. GEC Measurements,” Protective Relays : Application Guide”, GEC Measurements.
4. Masson R.J., Art & Science of Protective Relaying.
5. J & P Switchgear handbook Ravindra Nath B., and Chandar M., Power systems protection and switchgear
6. Rao Sunil S, Switchgear and protection.
7. Crane P.H.C., Switchgear Principle.
8. The Elementary Council, “Power System Protection”, Vol.1,2 &3, Peter Peregrinus Ltd.
9. Badriram & Vishwakarma, Power System Protection.
Text Books:
1. Ravindranath & Chander, Power System Protection & Switchgear.
2. C.L. Wadhwa : Electrical Power Synthesis: New Edge International Ltd.
 BE V SEMESTER
COURSE CONTENTS
EE-5004 Network Analysis & Synthesis L T P Max. Min.
Marks Marks
Duration 3 1 2 70 22
in hrs.

Course Objective:

UNIT – I : Graph Theory:

Graph of network, terminology used in network graph, incidence matrix, tie – set matrix and cut set matrix,
formulation of equilibrium equations on loop and node basis.

UNIT – II : Network functions:

Concept of complex frequency, network functions, poles and zeros, restrictions on the location of poles and
zeros of driving point function and transfer functions, time domain behaviour from pole – zero plot.

UNIT – III : Two port network

Two port parameters, relationship between parameter sets, interconnection of two – port network, condition of
reciprocity and symmetry.

UNIT – IV : Synthesis of passive network:

Synthesis of network with two kinds of elements – LC admittance function, RL and RC impedance or
admittance function, positive real function, Huraitz polynomial Foster and Cauer form.

UNIT – V : Filters:
Filter fundamentals, active and passive filter, analysis of prototype low pass, high pass and band pass filters,
m-derived filters, comparison between m – derived and prototype filters.

References-
1. M.E. Van Valkenburg, (PHI) - Network Analysis.
2. F.F.Kuo - Network Analysis.
3. Mittal GK, Khanna Publisher - Network Analysis.
4. Roy Choudhary D - Network and systems.
5. William D Stanley - Network Analysis with Applications
6. Chakraborti - Circuit theory:
Network Analysis & Synthesis
COURSE OUTCOMES: At the end of the course student will be able to:

CO1 Solve circuits using tree, cutset and tie set methods.
CO2 Understand & formulate the network transfer function in S-domain and
pole- zero concept.
CO3 Evaluate two port network parameters.
CO4 Synthesize one port network using Foster and Cauer forms.
CO5 Understand, analyze and design prototype L-C filters.

Mapping of Course outcomes (COs) with Program outcomes(POs):

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Outcomes
CO1
CO2
CO3
CO4
CO5

List of Experiment

1. To Determine Z parameters of a Two Port Network.

2. To Determine Y parameters of a Two Port Network.
3. To Determine A, B, C, D parameters of a Two Port Network.
4. To Determine h parameters of a Two Port Network.
5. To Determine Y parameters of 2 parallel connected Two Port Networks.
6. To Determine Z parameters of 2 series connected Two Port Networks.
7. To Determine ABCD parameters of 2 cascade connected Two Port N
 BE V SEMESTER
COURSE CONTENTS
EE-5006 Power System-II L T P Max. Min.
Marks Marks
Duration 3 1 2 70 22
in hrs.

Course Objective:

UNIT – I : Concept of distributed generations:

General consideration on various sources of energy, energy conversion employing steam, energy conversion
using water gas turbine, Gas power station, Block diagram, gas cycle, combined cycle power plants,
comparison between these power stations:
a) MHD generation
b) Solar generation
c) Wind power station
d) Geothermal power generation.

UNIT – II : Thermal, nuclear and hydro power station:

Block diagram of thermal power station, selection of site. Different types of auxiliaries used in thermal power
station. Nuclear Power Station: Different types of reactors and fuels, safety methods, waste disposal. Choice
of site, block diagram including surge tank and penstock, Hydrographs, flow duration curve. Types of turbines,
base load and peak load power station.

UNIT – III : Economic aspects of power plant operations:

Definitions load factor, demand factor and Diversity factor. Calculation of cost of generation, fixed charges,
interest and depreciations, Methods of Depreciation. Tariffs: Different types of tariffs, power factor
improvement.

UNIT – IV : Economic Scheduling of Power Stations:

Economic operation of power system, criteria of loading of power plants with and without transmission loss,
load dispatching in power system, co-generation and coordination of power plants.

UNIT –V : Power flow analysis:

Requirement of load flow studies, classification ………….., static load flow equation, solution of load flow
equation using N-R, GS & FDLF methods and their comparison.

References-
1. G.R.Nagpal, Khanna Publisher - Power Plant Engineering,
2. M.V.Deshpandey - Modern Design of Power Station.
Power System-II
COURSE OUTCOMES: At the end of the course student will be able
to:
CO1 Discuss power generation from MHD, solar, wind and geothermal power
plants.
CO2 Describe the main components of power system plants and understand their
functionalities.
CO3 Learn the economic aspects of power generation like load curve, demand,
diversity and plant utilization factors etc. and describe how mathematical
optimization techniques can be applied to the economic operation of power
systems.
CO4 Solve the problems related to the economic dispatch of power, plant
scheduling, unit commitment and formulate strategies to minimize
transmission line losses and penalties imbibed.
CO5 Perform steady state power flow analysis of power system networks using
Gauss-Seidel, Newton-Raphson and Fast decoupled iterative methods.

Mapping of Course outcomes (COs) with Program outcomes(POs):

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Outcomes
CO1
CO2
CO3
CO4
CO5

BE V SEMESTER
COURSE CONTENTS
EE-5005 Communication Engineering L T P Max. Min.
Marks Marks
Duration 3 1 2 70 22
in hrs.

UNIT – I :
Fourier series, Fourier Transform and its properties, Probability, random variables & their moments, their
significance, convolution, auto correlation, cross Correlation & power spectral density, Gaussian & Rayleigh
probability density Function, mean, variance & standard deviation, central limit theorem, voltage & Power
decibel scales. Signal Processing : Types of signal, deterministic & random, periodic & non Periodic, analog &
discrete, energy & power signals, Representation of sinusoid in different forms & their conversion

UNIT – II :
Need of modulation in a communication system, block schematic of a typical Communication system. AM
modulation system, modulation index, generation & detection of AM wave, side bands & power content in an
AM wave, DSB-SC, SSB, their methods of generation & detection, vestigial side Band modulation, AM
transmitter block diagram, comparison of various AM system, modulation & demodulation circuits. Relationship
between phase & freq. modulation, FM wave & its spectrum, phasor diagram of a narrow band FM signal, wide
band FM, methods of generation & detection of FM, discriminators, pre-emphasis & de-emphasis,
Stereophonic FM broadcasting, FM transmitters.

UNIT – III :
TRF receiver & its limitations, necessity of heterodyning, super heterodyning Receivers, IF amplifiers, selection
of intermediate frequency. RF amplifiers, detectors, AGC, AVC, FM receivers, AFC.

UNIT – IV :
Nyquist sampling theorem, TDM, pulse modulations & PCM, quantization error, necessity of non linear
quantizer, A-law, μ-law, FSK & PSK, QPSK, QAM. Source of noise, noise figure, noise bandwidth, effective
noise temperature, performance of AM, FM & digital system in presence of noise.

UNIT – V :
Satellite system block diagram, satellite freq. bands, satellite multiple access Format like TDMA, FDMA,
transponders, earth station & satellite eclipses, Link calculation

References-
1. Taub & shilling, Communication System, TMH
2. Singh & Sapre, Communication System, TMH
3. B.P. Lathi, Modern Digital and ana communication system,
4. Simon Haykins, Communication System. John Willy
5. Wayne Tomasi, Electronic Communication system.
6. Schaum outline Series, Analog and digital communication
7. Martin S. Roden, Analog & Digital Communication System., Discovery Press.
8. Frank R. Dungan, Electronic Communication System, Thomson/Vikas
9. John G. Prokis,Masoud Salehi, Gerhard Bauch, Contemporary communication sytems using
MATLAB,
Cengage learning 2004.

Communication Engineering
COURSE OUTCOMES: At the end of the course student will be able to:

CO1
CO2
CO3
CO4
CO5

Mapping of Course outcomes (COs) with Program outcomes(POs):

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Outcomes
CO1
CO2
CO3
CO4
CO5
 BE V SEMESTER
COURSE CONTENTS
EE-5007 Principles of Management & L T P Max. Min.
Economics Marks Marks
Duration 3 1 0 70 22
in hrs.

Course Objective:

UNIT – I : Management Concept:

Management, Administration and Organization Difference and Relationship between Organization
Management and Administration. Importance of Management, Characteristics of Management

UNIT – II : Management:
Scientific Management, Principles of Management, Process of Management, Functions of Management,
Levels of Management, Project Management

UNIT – III : Decision Making:

Introduction and Definition, Types of Decisions, Techniques of Decision Making, Decision making under
certainty Decision making under uncertainty, Decision Making under risk

UNIT – IV : Managerial Economics:

Introduction, Factors Influencing Manager, Micro and Macro-economics, Theory of the Cost, Theory of the
Firm, Theory of Production Function.

UNIT – V : Productivity:
Input-Output Analysis, Micro-economics Applied to Plants and Industrial Undertakings, Production and
Production system, Productivity, Factors affecting Productivity, Increasing Productivity of Resources

References-

1. Peter Drucker Harper and Row - The Practice of Management.

2. Koontz, Prentice Hall of India - Essentials of Management.
3. Prentice Hall of India - Management Staner.
4. T.N. Chhabra, Dhanpat Rai New Delhi - Principle and Practice of Management
5. T.R. Banga and S.C. Sharma, Economics Khanna -Industrial Organization and Engineering.
6. O.P. Khanna, Dhanpat Rai - Industrial Engineering and Management.
7. Joel Dean, Prentice Hall of India - Managerial Economics.
8. V.L. Mote, Samuel Paul, G.S. Gupta, Tata Mc Graw Hill New Delhi – Managerial Economics Concepts
& Cases
9. V.L. Mote, Tata McGraw Hill - Managerial Economics
COURSE OUTCOMES: At the end of the course student will be able
to:
CO1
CO2
CO3
CO4
CO5

Mapping of Course outcomes (COs) with Program outcomes(POs):

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Outcomes
CO1
CO2
CO3
CO4
CO5