Scribd Logo
Upload

Welcome to Scribd!

  • 81 views

    Form N 2 Sample Welding Procedure Specification

    Uploaded by

    Viswanath Sreepada
    This document is a welding procedure specification that provides details for welding processes, base metals, filler metals, shielding, techniques, preheat and postweld heat treatment requirements, and pass-by-pass welding parameters. It specifies the welding process, position, joint design, electrical characteristics, technique, preheat and postweld heat treatment requirements. It also includes a table detailing the filler metals, current type and amperage, wire feed speed, voltage, travel speed, and joint details for each weld pass or layer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Form N 2 Sample Welding Procedure Specification

    Uploaded by

    Viswanath Sreepada
    81 views1 page
    This document is a welding procedure specification that provides details for welding processes, base metals, filler metals, shielding, techniques, preheat and postweld heat treatment requirements, and pass-by-pass welding parameters. It specifies the welding process, position, joint design, electrical characteristics, technique, preheat and postweld heat treatment requirements. It also includes a table detailing the filler metals, current type and amperage, wire feed speed, voltage, travel speed, and joint details for each weld pass or layer.

    Original Title

    Form-N-2-Sample-Welding-Procedure-Specification

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a welding procedure specification that provides details for welding processes, base metals, filler metals, shielding, techniques, preheat and postweld heat treatment requirements, and pass-by-pass welding parameters. It specifies the welding process, position, joint design, electrical characteristics, technique, preheat and postweld heat treatment requirements. It also includes a table detailing the filler metals, current type and amperage, wire feed speed, voltage, travel speed, and joint details for each weld pass or layer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    81 views1 page

    Form N 2 Sample Welding Procedure Specification

    Uploaded by

    Viswanath Sreepada
    This document is a welding procedure specification that provides details for welding processes, base metals, filler metals, shielding, techniques, preheat and postweld heat treatment requirements, and pass-by-pass welding parameters. It specifies the welding process, position, joint design, electrical characteristics, technique, preheat and postweld heat treatment requirements. It also includes a table detailing the filler metals, current type and amperage, wire feed speed, voltage, travel speed, and joint details for each weld pass or layer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    AASHTO/AWS D1.5M/D1.

    5:2020 ANNEX N

    WELDING PROCEDURE SPECIFICATION (WPS)


    PREQUALIFIED QUALIFIED BY TESTING
    or PROCEDURE QUALIFICATION RECORDS (PQR) Yes
    AASHTO/AWS D1.5 Qualification Type 7.12.1 – 7.12.2 – 7.12.4

    Contractor/ Identification ___________________________________


    Organization __________________________________ Revision _______ Date __________ By ____________
    Welding Process(es) ____________________________ Authorized by __________________ Date __________
    Type: Manual Semiautomatic Supporting PQR No.(s) __________________________
    Mechanized Automatic
    POSITION
    Tandem Parallel
    Position of Groove ______________ Fillet __________
    Vertical Progression: Up Down
    JOINT DESIGN USED ELECTRICAL CHARACTERISTICS
    Single Double Weld Transfer Mode (GMAW): Globular Spray
    Backing: Yes No Material _______________ Current: AC DCEP DCEN Pulsed
    Root Opening ______ Root Face Dimension ________
    Electrical Stick Out ______________________________
    Groove Angle ___________ Radius (J–U) _________
    Other ________________________________________
    Backgouging: Yes No Method ____________
    Root Treatment ________________________________ TECHNIQUE
    Stringer or Weave Bead __________________________
    BASE METALS Multi-pass or Single Pass (per side)_________________
    Material Spec. _________________________________ Number of Electrodes ___________________________
    Type or Grade _________________________________ Electrode Spacing: Longitudinal __________________
    Thickness: Groove ____________ Fillet __________ Lateral _______________________ Angle__________
    Diameter (Pipe) ________________________________ Interpass Cleaning ______________________________
    PREHEAT
    FILLER METALS Preheat Temp., Min. _____________________________
    AWS Specification______________________________ Interpass Temp., Min. ____________________________
    AWS Classification _____________________________ Interpass Temp., Max. ___________________________
    Manufacturer Trade Name________________________
    POSTWELD HEAT TREATMENT
    Temp. _________________ Hold Time_____________
    SHIELDING
    Heating/Cooling Rate ____________________________
    Flux _________ Mfg. Trade Name ________________
    Electrode-Flux (Class)___________________________ HEAT INPUT
    Gas Composition ______________________________ Calculated Heat Input Value: kJ/in kJ/mm
    Flow Rate ______________ Gas Cup Size _________ Max. Heat Input _________ Min. Heat Input_________

    WELDING PROCEDURE
    Filler
    Pass or Metals Current
    Weld Type & Amps or Wire Travel
    Layer(s) Process Diam. Polarity Feed Speed Volts Speed Joint Details

    Form N-2

    Form N-2—Sample Welding Procedure Specification

    293

    You might also like