Product data sheet ATS01N106FT

Characteristics soft starter for asynchronous motor - ATS01 - 6 A

Main

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Range of product Altistart 01
Product or component type Soft starter
Product destination Asynchronous motors
Product specific application Simple machine
Device short name ATS01
Network number of phases 1 phase
[Us] rated supply voltage 110...480 V - 10...10 %
Motor power kW 3 kW, 3 phases at 400 V
0.75 kW, 3 phases at 230 V
1.1 kW, 3 phases at 230 V
2.2 kW, 3 phases at 400 V
0.75 kW, 1 phase at 230 V
Motor power hp 1 hp, 3 phases at 230 V
2 hp, 3 phases at 460 V
3 hp, 3 phases at 460 V
0.5 hp, 3 phases at 210 V
1.5 hp, 3 phases at 230 V
IcL starter rating 6 A
Utilisation category AC-53B conforming to EN/IEC 60947-4-2
Current consumption 30 A at nominal load
Type of start Start with voltage ramp
Power dissipation in W 1 W at full load and at end of starting
31 W in transient state

Complementary
Assembly style With heat sink
Function available Integrated bypass
Supply voltage limits 99…528 V
Supply frequency 50...60 Hz - 5...5 %
Network frequency 47.5...63 Hz
Output voltage <= power supply voltage
[Uc] control circuit voltage 110 V AC +/- 10 % at 30 mA
24 V AC/DC +/- 10 % at 25 mA

Apr 5, 2021
1
 240 V AC +/- 10 % at 65 mA
Starting time 1 s / 100
5 s / 20
Adjustable from 1 to 5 s
Starting torque 30...80 % of starting torque of motor connected directly on the line supply
Discrete output current 2 A DC-13
3 A AC-15
Tightening torque 0.8 N.m
Electrical connection Cage type connector - rigid 1 2.5 mm² AWG 14 control circuit
Cage type connector - rigid 1 2.5 mm² AWG 14 power circuit
Cage type connector - rigid 2 1 mm² AWG 17 control circuit
Cage type connector - rigid 2 1 mm² AWG 17 power circuit
Cage type connector - flexible with cable end 1 2.5 mm² AWG 14 control circuit
Cage type connector - flexible with cable end 1 2.5 mm² AWG 14 power circuit
Cage type connector - flexible without cable end 1 2.5 mm² AWG 14 control circuit
Cage type connector - flexible without cable end 1 2.5 mm² AWG 14 power circuit
Cage type connector - flexible with cable end 2 0.75 mm² AWG 18 control circuit
Cage type connector - flexible with cable end 2 0.75 mm² AWG 18 power circuit
Cage type connector - flexible without cable end 2 1 mm² AWG 17 control circuit
Cage type connector - flexible without cable end 2 1 mm² AWG 17 power circuit
Marking CE
Operating position Vertical +/- 10 degree
Height 100 mm
Width 23 mm
Depth 100 mm
Net weight 0.16 kg
Compatibility code ATS01N1
Motor power range AC-3 0.55…1 kW at 200…240 V 3 phases
1.1…2 kW at 380…440 V 3 phases
0.55…1 kW at 200…240 V 1 phase
1.1…2 kW at 200…240 V 3 phases
2.2…3 kW at 380…440 V 3 phases
Motor starter type Soft starter

Environment
Electromagnetic compatibility Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC
61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
Voltage/current impulse level 3 conforming to IEC 61000-4-5
Standards EN/IEC 60947-4-2
Product certifications C-Tick
CCC
CSA
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
UL
GOST
IP degree of protection IP20
Pollution degree 2 conforming to EN/IEC 60947-4-2
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation -10…40 °C (without derating)
40…50 °C (with current derating of 2 % per °C)

2
Ambient air temperature for storage -25…70 °C conforming to EN/IEC 60947-4-2
Operating altitude <= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m

Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 178 g
Package 1 Height 2.5 cm
Package 1 width 10.3 cm
Package 1 Length 10.5 cm
Unit Type of Package 2 S02
Number of Units in Package 2 36
Package 2 Weight 6.778 kg
Package 2 Height 15 cm
Package 2 width 30 cm
Package 2 Length 40 cm

Offer Sustainability
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Circularity Profile End of Life Information
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins

Contractual warranty
Warranty 18 months

3
Product data sheet ATS01N106FT
Dimensions Drawings

Dimensions

Mounting on Symetrical (35 mm) Rail or Asymetrical Rail with Adaptor RHZ 66

4
Product data sheet ATS01N106FT
Connections and Schema

Example of 3-phase Power Supply Connection

(1) A line contactor must be used in the sequence.

5
Product data sheet ATS01N106FT
Technical Description

Function Diagram

Us : Power supply voltage