No.

ED1014
September 2009

Equipment : MS Software

PROCEDURE TO ADJUST THE STEP RANGE OF CMYD KEY

Subject :
CORRECTION

Improvement & Part No. Errata & Technical Product Info. & Modification Field Equip.
Countermeasures Additions Information Specifications Control Countermeasure
UN1 [ ] UN2 [ ] UN3 [ √ ] UN4 [ ] No. No.

<Contents>
The procedure to adjust the step range of the CMYD key correction for 6-frame view and order
screen/1-frame view and order screen/Enlarged view and order screen is described below.

<Version in question>
MS01 Basic Software V.2.5.5

<Adjustment procedure>

1. File
C:\Fes\Datafiles\I2GUISettings - Global.ini

2. Items to be adjusted
Change the parameters described in bold face of I2GUISettings - Global.ini (No. 1 - No. 4) below. After
changing, restart the system. (Note: Do not change other items than those in bold face.)

[I2GUISettings]
colorMultiplier=8 …No. 1
colorMax=20 … No. 2
Example
densityMultiplier=15 … No. 3 Regular Shops with regular Professional
densityMax=34 … No. 4 shops and pro services lab
contrastMultiplier=5
No. 1 8 4 2
contrastMax=10
saturationMultiplier=1 No. 2 20 30 36
saturationMax=9 No. 3 15 8 4
sharpenMultiplier=50
No. 4 34 50 60
sharpenMax=10
hlSDMultiplier=2
hlSDMax=25

Factory Modifications : From Serial No.: Completion Date :

Field Countermeasures : [ ] Individually, with Charge [ ] Individually, Free of Charge [ ] All Free of Charge
Order Basis Automatic Distribution
Part Preparation : [ ] [ ] Available : [ ] Being Prepared by: [ ]
After Order Received by:

1
<Description of items to be adjusted>
No. Key name Default Description Range Restriction
1 colorMultiplier 8 Correction amount of CMY per 1 step. 1 - 512
The smaller the value is, the more The result of
detailed the correction is. multiplying value of No.
2 colorMax 20 The maximum value that CMY can be 1 - 99 1 by value of No. 2
set on the GUI. should be 512 or less.
The minimum value is the negative
value.
(Ex. If this value is 20, the setting can
be done between 20 to -20.)

3 densityMultiplier 15 Correction amount of D per 1 step. 1 - 512

The smaller the value is, the more The result of
detailed the correction is. multiplying value of No.
4 densityMax 34 The maximum value that D can be set 1 - 99 3 by value of No. 4
on the GUI. should be 512 or less.
The minimum value is the negative
value.
(Ex. If this value is 34, the setting can
be done between 34 to -34.)

FUJIFILM Corporation
7-3, Akasaka 9-chome, Minato-ku, Tokyo 107-0052, Japan
Ref. No. PP3-ED1014 QAD-09.9-FP Printed in Japan