030 Outdoor Basketball Booklet
030 Outdoor Basketball Booklet
030 Outdoor Basketball Booklet
Basketball
Equipment
Primary Basketball Tower Height Adjustable
The angled support bracket gives a backboard overhang of 1200 mm and also allows the
height of the backboard to be adjusted. The two most popular height settings are provided,
Regulation and Kiwi height and the locating pin can be padlocked for additional security.
The backboard is Primary size (1200 mm x 800 mm) and is manufactured from marine
bonded ply which is fully painted and line marked complete with regulation size goal square.
The post can be permanently concreted into the ground or the optional ground sleeve can be
used making the tower removable.
A lever on the back of the post is operated by standing on a footplate and removing the
locking pin and this allows the backboard to be adjusted from ‘Regulation’ height down to
‘Kiwi’ height and then the locking pin replaced.
The mechanism is spring assisted to make the adjustment easily made by an adult and the
locking pin can be padlocked for additional security.
The special basketball bracket supports a Primary Size (1200 x 800mm) marine bonded ply
backboard which is fully painted and line marked complete with regulation goal square.
All steel work is hot dip galvanised for maximum corrosion protection and the system is
supplied with a regulation size Goliath Hoop.
The post can be permanently concreted into the ground or alternatively an optional ground
sleeve is available which will make the tower removable.
N.B.
For use on Asphalt surfaces please discuss the requirements with us as the standard wheels
will mark the court surface.
A lever on the back of the main post is operated by standing on a footplate and removing a
locking pin which allows the backboard to be adjusted from ‘Regulation’ height to ‘Kiwi’ height
and then replacing the locking pin.
The mechanism is spring assisted making the adjustment quite easy for an adult.
Additional Features:
Primary size backboard (1200 x 800 mm).
Full backboard support frame.
Regulation size ‘Goliath’ Heavy Duty Hoop.
Heavy Duty Steel construction fully hot dip galvanised for maximum corrosion protection.
Powder coat finish available for indoor use units.
Four Heavy Duty Wheels - 2 castoring and lockable for easy positioning.
Special concrete counterweights bolted in place.
Total counterweight nominally 250kg.
Optional floor anchor bolts - recommended for heavy use areas
Some assembly required.
Similar to 030/055 being a fixed height unit but with the advantage of being able to rotate
the post on the base to use the netball hoop fitted to the back of the post.
The backboard is International size and manufactured from marine bonded ply which is fully
painted and finished with regulation line markings.
The system is supplied with your choice of either a Goliath bolt on hoop or a removable
security hoop, or you may choose to pay a little extra and have a Competition Grade Sprung
Hoop for more serious play.
The post can either be permanently concreted into the ground or the optional ground sleeve
can be used which means the tower can be removed.
2 way, 3 Way and 4 Way Towers are also available, please enquire for more details.
The system is supplied with your choice of either Heavy Duty Bolt on Hoops or Removable
Security Hoops.
The post can either be permanently concreted into the ground or the optional ground sleeve
can be used which means the tower can be removed. In either case a solid and secure footing
is required in the ground and we can supply recommendations as to size and depth.
To make the installation easier, the cross arm is supplied as a separate component which is
'bolted' to the post once the post has been set into position.
N.B Outdoor towers are available in Single, 2 Way, Three Way and Four Way Designs.
Plus we are ale to custom manufacture units.
Often when space is limited or a conventional court layout cant work a multiple basketball
tower provides the ideal solution.
The standard 3 Way Tower carries an Engineering Design Certificate and features a 150 mm
diameter steel post and three backboard support arms arranged around a 'top-hat' central
section.
This design allows the main post to be installed and then the backboards lifted into place with
the 'top-hat' sitting over the top of the main post. The 'Top-hat' is then bolted through the
post.
Each Backboard overhangs the posts by 1.2 metres and all steel work is hot dip galvanised
for maximum corrosion protection. The backboards are manufactured from Marine Bonded
Plywood which is fully painted and finished with regulation line markings and are to
International sizing.
The system is supplied with your choice of either Heavy Duty Bolt-on Hoops or Removable
Security Hoops.
The post can either be permanently concreted into the ground or the optional ground sleeve
can be used which means the tower can be removed. In either case a solid and secure
footing is required in the ground and we can supply recommendations as to size and depth.
N.B. Outdoor towers are available in Single, 2 Way, Three Way and Four Way Designs.
Plus we are able to custom manufacture units.
The system is supplied with your choice of either Heavy Duty Bolt on Hoops or Removable
Security Hoops.
The post can either be permanently concreted into the ground or the optional ground sleeve
can be used which means the tower can be removed. In either case a solid and secure
footing is required in the ground and we can supply recommendations as to size and depth.
N.B. Outdoor towers are available in Single, 2 Way, Three Way and Four Way Designs.
Plus we are able to custom manufacture units.
This outdoor tower is manufactured to our well proven design and has been fully checked
by a Registered Engineer and is fabricated so that the backboard projects 1.5 metres from
the main support post.
It features a 100 x 100 mm RHS steel post and cross arm gusseted for strength. The
backboard is supported by a full steel frame which in turn is braced by stays back to the
cross arm.
All steel work is hot dip galvanised for maximum corrosion protection.
The backboard is International size and manufactured from marine bonded ply which is
fully painted and finished with regulation line markings.
Taking its basic design from our standard Heavy Duty Tower, this model achieves an
even greater overhang with increased post and cross arm sizes.
Once again the design has been fully checked by a Registered Engineer and is backed
by an Engineering Design Certificate.
All steelwork is hot dip galvanised for maximum corrosion protection and the tower is
supplied with and International sized marine bonded ply backboard and a bolt on Extra
Heavy Duty Goliath Hoop or option of removable.
This design of heavy duty tower features a 115 mm diameter post rolled to a gooseneck shape
which then supports the backboard on its full steel frame and the design is fully Engineer
checked.
The backboard face to the post overhang is 1.5 metres and stays are included to brace the
backboard back to the top of the post. All steel work is hot dipped galvanised.
The backboard is International size Marine Bonded Ply which is fully painted and finished with
regulation line marking. A Goliath Heavy Duty Hoop is included.
Whilst similar to other towers in our range, this model has been designed with the assistance of
a Registered Engineer and used a 140 mm diameter post which is rolled to achieve the post to
backboard overhang of 2.4 metres.
As with other models, this unit features a full steel backboard frame plus stays and all
steelwork is hot dip galvanised.
The backboard is International size and manufactured from marine bonded ply which is fully
painted and line marked to regulation dimensions.
If required, an optional ground socket is available (code 060/047) although concreting directly
into the ground is preferred.
Heavy duty 100NB Hot Dipped Galvanised round pipe Basketball Tower
This unit is regulation height and features a 1.2 metre overhang with International size
marine bonded ply backboard on a full steel frame and complete with a Heavy Duty
Goliath Hoop.
Come complete with special ground socket which allows post to be reversed for
Basketball or Netball.
A custom designed outdoor unit which sees the backboard attached to support arms which
in turn are attached to posts set into the ground. Typically, the posts may be on the
fenceline of an outdoor court.
The backboard projects into the court but then when the court is needed for other sports, it
can be simply swung sideways and locked out of the way.
All steel work is hot dip galvanised for maximum corrosion protection and the unit is fitted
with an International size Marine Bonded Ply Backboard and supplied with a Goliath bolt on
hoop.
Each unit is custom designed and manufactured to suit each application so please contact
us for further details and pricing.
All Gymleader and Sportmat standard Basketball backboards are manufactured from 18mm
marine bonded plywood, and boards are fully painted and line marked.
For systems where there is no steel support behind the hoop area, we can supply reinforcement
as an additional item - please enquire.
All Gymleader Basketball Hoops are manufactured from solid steel and are very robust. The
design is well proven right throughout the country at Schools and Recreation Centres.
Two models are available, either standard Heavy Duty where the ring is made from 16 mm
diameter steel, or the Goliath Hoop where 20 mm diameter steel is used for the ring.
Both hoops are finished in Orange powder coat as standard although galvanised finish is
available to special order.
The rigid design type means that the hoop is rigidly bolted to the backboard. An optional extra,
a slide out kit can be used which allows the hoop to be removed to prevent theft or
unauthorised play.
All Gymleader Basketball Hoops are manufactured from solid steel and are very robust.
The design is well proven right throughout the country at Schools and Recreation Centres.
Two models are available, either standard Heavy Duty where the ring is made from 16 mm
diameter steel, or the Goliath Hoop where 20 mm diameter steel is used for the ring.
Both hoops are finished in Orange powder coat as standard although galvanised finish is
available to special order.
The rigid design type means that the hoop is rigidly bolted to the backboard.
The Goliath Hoop has a larger back plate which is supplied drilled with a fixing pattern of
50 x 75 mm.
Attach slide plate to backboard with 4 x countersunk machine screws & washers &
nuts.
Plate should be positioned centrally on board & so top of hoop is level with goal
square line as shown.
Use pin with a padlock (not supplied) to prevent unauthorised removal of hoop.
www.gymleader.co.nz
Copyright
All brand names, designs and details used in this file and any other Gymleader New Zealand Limited material are the property
of Gymleader New Zealand Limited and as such are protected by copyright.
No part of this book or any other Gymleader New Zealand Limited information can be reproduced in any form whatsoever
without the prior express written approval of Gymleader New Zealand Limited.