Atlas Copco Rock Drilling Tools: Quantum Leap® Hammers

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Atlas Copco Rock Drilling Tools

SECOROC Down-the-hole equipment


Quantum Leap® Hammers

Strong performance and affordability


Our Quantum Leap® product line is available for those seeking
a good balance between strong performance and cost. This pro-
duct line was the drilling industry’s first hybrid-combination
of valve and valveless-air cycle down-hole drills. Setting many
industry benchmarks, the Quantum Leap® line continues to
offer good value.
QL 200 Specifications
General Specifications Air Consumption:
Standard Special Standard Special
English Metric English Metric 100 psi/ 6,9 bar (scfm & l/s) 1,584 747 1,584 747
Standard drill pipe connection (see options) 85/ 8 API reg pin 85/ 8 API reg pin blows per minute 701 701
Outside diameter (in & mm) 15.6 396 15.6 396 150 psi/ 10,3 bar (scfm & l/s) 2,470 1165 2,470 1165
Length w/o bit shoulder to shoulder (in &mm) 65.8 1670 72.1 1831 blows per minute 807 807
200 psi/ 13,8 bar (scfm & l/s) 3,389 1599 3,389 1599
Length with bit extended (in & mm) 75.3 1911 83.5 2120
blows per minute 923 923
Length with bit retracted (in & mm) 73.3 1861 81.5 2069
250 psi/ 17,2 bar (scfm & l/s) 4,341 2048 4,341 2048
Weight w/o bit (lb & kg) 2579 1172 2983 1356 blows per minute 1,049 1,049
Backhead across flats Special Wrench/Tongs Required 300 psi/ 20,7 bar (scfm & l/s) 5,324 2511 5,324 2511
Minimum bit size (in & mm) 17.5 444 28.0 711 blows per minute 1,185 1,185
Maximum bit size (in & mm) 26.0 660 36.0 914 350 psi/ 24,1 bar (scfm & l/s) 6,340 2991 6,340 2991
Bore (in & mm) 12.25 311 12.25 311 blows per minute 1,331 1,331
Piston weight (lb & kg) 610 277 610 277 Above specifications/ratings are based on initial factory setting
Stroke (in &mm) 4.0 102 4.0 102
Maximum pressure differential (psig & bar) 250 17 250 17
Maximum choke diameter (in & mm) 0.88 22.3 0.88 22.3
Make-up torque (ft-lb & N-m) 18000 24372 18000 24372
Shank style QL200 QL200
PHYSICAL FEATURES

OTHER FEATURES

Left Hand Threads


CONNECTIONS

Blank Backhead

Cutting Backhead
Two Piece Chuck
4-1/2 BECO pin

High Frequency

Retrieval System
Quarry Mining

Oversize Chuck
4-1/2 reg pin

Low Pressure
8-5/8 reg box

No Backhead
6-5/8 reg pin

8-5/8 reg pin

Tough Casing

Hydrocyclone
Thick Casing

Reduced OD
Deep Hole
Standard

AirSelect
Part Information
Oil Free
Mizer

Prod. code Part No. Description


52286523 9720-36-50-00 QL200 X X
52328069 9720-43-50-00 QL200 X X
52286531 9720-36-50-06 QL200S X X X

Atlas Copco Secoroc offers a wide range of bit body designs


and button inserts to meet your specific drilling requirements.
Consult the Drill Bits catalogue, or contact your local sales
office for details.

2006.01
9851 2393 01

Atlas Copco Secoroc AB


Box 521, SE-737 25 Fagersta, Sweden
Tel +46 223 461 00 – Fax +46 223 461 01
www.atlascopco.com

You might also like