Schedule of Rate MG NREGA 2020

INDEX
Chapter No. Name of Sub-head Page NO.

1 Labour –Basic Rates 1 - 4.
2 Material 5 - 18.
3 Usages charges of Machinery 19 - 22
4 Mortars 23 - 26
5 Carriage by Manual Labour 27 - 30
BUILDING (CIVIL WORK)
6 Earth Work 31 - 34
7 Form Work 35 - 38
8 Concrete 39 - 42
9 Brick Work 43 - 46
Stone Masonry, Precast Concrete Block Masonry and
10 47 - 50
Marble work.
11 Wood Work 51 - 58
12 Paving and Flooring 59 - 64
13 Roof Covering 65 - 68
14 Steel Work 69 - 72
15 Painting and Polishing 73 - 78
Plastering, White Washing, distempering and Other
16 79 - 84
finishes.
17 Miscellaneous Work 85 - 88
WATER SUPPLY AND SANITARY INSTALLATION
18 Internal water supply and sanitary installation. 89 - 94
ROAD WORK
19 Carriage, Crushing of materials and setting out. 95 - 98
20 Site clearance. 99 - 102
21 Earth work, erosion control and drainage. 103 - 106
Granular sub-bases, bases (Non-Bituminous) and
22 107 - 110
shoulders.
23 Cement concrete pavement. 111 - 114
24 Hills Roads. 115 - 118
25 Pipe culvert. 119 - 122
26 Foundation. 123 - 126
27 Substructure. 127 - 130
28 Superstructure. 131 - 134
29 Protection work. 135 - 137
CHAPTER -1
1
Chapter 1
LABOUR
BASIC RATES
Notes:-
1 Rates of unskilled labour has been taken Rs. 184.00 per day as
aproved by the G.O.I for MGNREGA and rate for other semi skilled
/ skilled labour has been taken as per the Govt. of HP notification
No. Fin-(PR)B(7)-33/2010 dated 16-04-2018.
2 The Schedled tribal area of the state shall be allowed 25%
enhancement on the labour wages.
2
CHAPTER - I
BASIC RATES OF LABOUR
CODE DESCRIPTION UNIT RATE
1 Beldar / coolie Each 184.00
Bhisti Each 184.00
2 Blaster Each 267.00
3 Mate Each 184.00
3 Mason 2nd class Each 267.00
4 Mason 1st class Each 346.00
5 Black smith 2nd class Each 267.00
4 Black smith 1st class Each 346.00
6 Carpenter 2nd class Each 267.00
7 Carpenter 1st class Each 346.00
8 Fitter Each 267.00
9 Painter 1st Class Each 267.00
3
4
CHAPTER -2
5
Chapter II
MATERIAL FOR BUILDING WORKS

Notes:-
1 All the rates in this chapter for the materials are prevailing average market
rates.
2 These rates are exclusive of carriage, but include Octroi, Toll-tax, Malkana,
Royalty, Sales Tax etc. Wherever applicable.
3 The rates are for the purpose of analysing the rates of items of work are
not for obtaining supplies from open market. Supplies shall be obtained
either through Controller of Stores, H.P. or after calling tender or
quotations as may be required under rules and order in force.
4 The rates shall not be used for issuing materials from Government Stores.
6
CHAPTER - 2
BASIC RATES OF MATERIAL
1 Sand Cu M 1111.00
2 Agg. 10 mm Cu M 1281.00
3 Agg. 20 mm Cu M 1276.00
4 Agg. 40 mm Cu M 1069.00
5 Brick aggregate 40 mm nominal size Cu M 1750.00
6 Boulder (Stone for wire crstes) / soling stone. Cu M 766.00
7 Stone for C.R. masonry 1st sort Cu M 1368.00
8 Through bond stone (1st sort) 100 nos. 3000.00
9 Ordinary quarid Stone Cu M 1170.00
10 Through and bond stone 100 nos. 2200.00
11 Stone for stone sett pavement (300x200x150mm Each 12.30
12 Stone for edge stone (450x200x350 mm) Each 43.00
13 Bricks (F.P.S. or Modular): 2md class 1000 nos. 5000.00
14 Port land Cement Tonne 6600.00
15 Steel (tested): Steel reinforcement (HYSD Bars) Qtls 5500.00
16 Special Gelatin (80 %). KG 98.00
17 Detonators(ordinary). 100 nos. 300.00
18 Safety fuse wire (Coil 10.00 Mtr. Length) Coil 30.00
19 Binding wire KG 83.00
19 GI Wire crates 4 swg / binding wire KG 62.00
Deodar wood Ist Class
20 In scants. Cum 0.00
21 In Planks. Cum 0.00
Deodar wood 2nd Class
Kail wood Ist Class
Kail wood 2nd Class
Sal wood
7

Flush doors: Decorative teak veneer on both faces:
29 Sq M 2250.00
40mm thick
30 Flush doors: Commercial ply on both faces: 40mm thick Sq M 1500.00
31 Boards: Partical Board. 12mm thick Sq M 400.00

32 6 mm thick standard quality hard board. Sq M 350.00
33 Ply wood: Commercial:6mm thick Sq M 300.00
34 6 mm thick plain asbestos cement sheet Sq M 275.00
35 Prelaminaed board (both side) 12mm thick. Sqm 800.00
36 Balli ( wood) RM 200.00
37 Wire gauge 85 gauge Sq M 450.00
38 GSW mesh of size 100x100mm with 4mm dia. G.I. wire Sq M 189.00
10mm thick anti skid water proof stain and impact

39 Sq M 850.00
resistant heavy duty vitrified tiles Nitco or equivalent
Duro stone vetrified floor tiles 10 mm thick of any shade
40 Sqm 850.00
and size.
Duro stone vetrified tiles 8mm thick of any shade and
41 Sqm 720.00
size.
42 Ceramic spartic titles 5.5 mm Sq M 600.00
Tiles : (First quality) Terrazo tiles (Precast 20mm thick)
43 Sqm 370.00
Medium shade
44 White cement Tonne 24000.00
45 Medium shade pigment Kg 150.00
46 Red sand stone 40mm thick Sqm 500.00
47 Kota stone slabs: 25mm thick Sqm 550.00
48 Garsa (Kullu) Stone slab 12.5mm thick Sqm 575.00
49 20 mm thick White makrana marble. Sqm 800.00
50 PVC antistatic vinyl flooring plain or coloured 2mm thick. Sq M 600.00
51 Adhesive for PVC Flooring Litre 350.00
52 PVC / rubber tile Flooring 2 mm thick Sq M 550.00
53 White glazed tiles Sq M 275.00
54 Glass panes of sizes: Plain glass: 3mm thick. Sq M 350.00
55 Iron hinges 125x65x2.12mm 10 Nos 195.00
56 Iron Hinges 100x58x1.90mm 10 Nos 130.00
8
57 Iron hinges 50x37x1.50 mm 10 Nos 60.00
58 Nickel plated bright finished piano hinges Mtr 75.00
59 Screws 50 mm 100 Nos 125.00
60 Screws 40 mm 100 Nos 65.00
61 Screws 25 mm 100 Nos 60.00
62 Screws 20 mm 100 Nos 50.00
63 CGI / PGI Sheet 0.63 mm thick Qtls 6500.00
64 G.I.seam bolts and nuts . 10 Nos 75.00
65 J or L hooks 10 Nos 100.00
66 Limpet washer 100 Nos 60.00
67 Bitumen washers 100 Nos 40.00
68 Prepainted Sheet 0.60 mm thick. Sq M 850.00
69 Prepainted sheet 60cm overall Rmt 330.00
70 Iron bolts and nuts 10 nos 80.00
71 GI/Plain washer 100 Nos 100.00
71 Bitumen washer Each 50.00
72 Flat iron bracket with 40x3mm.with bolts and nuts Each 50.00
PVC (D-Plast) rain water pipes of working pressure not
less than 4.5 kg/sqm
73 75 mm dia Mtr. 150.00
74 110 mm dia. Mtr. 190.00
75 150 mm dia Mtr. 350.00
Acessories:
Plain bend.
76 75 mm dia each 100.00
77 110 mm dia. each 150.00
78 150 mm dia each 315.00
Collar
79 75 mm dia each 80.00
80 110 mm dia. each 105.00
81 150 mm dia each 245.00
9
PVC plain shoe each
82 75 mm dia each 100.00

83 110 mm dia. each 115.00
84 150 mm dia each 315.00
85 B.P. sheet 1.66 mm to 2mm thick Kg 55.00
86 Welding charges Per cm 3.00
87 Anodized aluminium sliding door bolt 300 x 16 mm Each 250.00
88 Anodized aluminium sliding door bolt 250 x 16 mm Each 200.00
Aluminium tower bolt (barrel type) anodized transparent
89 Each 90.00
or dyed 250x10 mm
90 Each 80.00
or dyed 200x10mm
91 Each 70.00
or dyed 150x10mm
Aluminium handle anodized transparent or dyed
92 Each 50.00
125 mm
93 Each 40.00
100 mm
94 Each 30.00
75 mm
95 M.S.hooks and eyes 150 mm Each 45.00
96 Oxidized M.S. sliding door bolts 300x16mm. Each 160.00
97 Oxidized M.S. sliding door bolts 250x16 mm Each 150.00
98 G.I. Bolts and nuts 50x6 mm Each 2.50
99 Oxidized M.S. tower bolt 200x10mm Each 70.00
102 Oxidized M.S. handles 125mm Each 45.00
105 M.S. safety hasps and staples 115 mm Each 38.00
106 Anodized steel screws 25mm Each 0.60
107 M.S. flats Per Qtls. 5500.00
108 M.S. angle, tee Per Qtls. 5200.00
109 R.S.joists Per Qtls. 5200.00
110 Plates Per Qtls. 7500.00
111 Rivets Per Qtls. 5820.00
10
112 MS pipe 50 mm nominal bore m 320.00
Steel (tested): Steel doors, windows shutters and other

113 accessories ready made steel door with necessary Per Sqm 1000.00
hinges, iron lugs with nuts:single leaf door

114 accessories ready made steel door with necessary Per Sqm 1200.00
hinges, iron lugs with nuts: doubleleaf door
accessories ready made standard steel
115 Per Sqm 950.00
windows/ventilators with necessary fittings :fixed steel
window
116 Per Sqm 1000.00
windows/ventilators with necessary fittings :side hung
window
117 Per Sqm 1200.00
windows/ventilators with necessary fittings :top hung
ventilator
118 M.S. Hollow pipe 50mm dia (moulded hand rail) Per rmt 220.00
Aluminium Sections, Aluminium snap beading,
119 K.G 325.00
Aluminium Angle cleat,
120 C.P. brass /stainless steel screws cent 270.00
121 Dash hold fastners Each 270.00
122 Anodishing K.G. 270.00
123 E-Board 4mm thick Sqm 595.00
124 19mm thick Commercial Board water proof Sqm 800.00
125 1.00mm thick sunmica sheet Sqm 540.00
126 Fevicoal Ltr 230.00

Ready mixed priming paint red lead,Red-oxide/zinc
127 1 Litre 150.00
oxide chrome.
128 Readymixed paint brushing primer for enemel 1 Litre 160.00
129 Readymixed cement primer 1 Litre 110.00
130 Birla white wall putty (Ready made) Per Kg 35.00

Enamel paint (white) 1st quality (Asian/Nerolac/Burger
131 1 Litre 230.00
etc)
132 Enamel paint (other than white) 1 Litre 220.00
133 Aluminium paint (red shade) 1 Litre 200.00
134 Readymixed paint (White /grey/green shade) 1 Litre 230.00
11
weather proof exterior (Apexultima)
135 1 Litre 330.00
(Asian/Nerolac/Burger etc
136 Acrylic Emulsion paint 1 Litre 190.00
137 Spirit 1 Litre 100.00
138 Shallac Per Kg 700.00
139 Lime unslaked per Qtls. 1350.00
140 Dry Distempers: Per Kg 55.00
141 Chalk whiting (Chauk Mitti) Per Kg 30.00
142 Distemper primer: 1 Litre 110.00

Oil bound washable distemper 1st quality (Asian/
143 Per Kg 55.00
Burger/Nerolac
144 Water proofing cement paint Per Kg 40.00
145 Plastic emulsion paint 1 Litre 250.00
146 Water kl 100.00
147 Earth taken from private land cum 63.00

Well graded granular sub-base materialsGrade-A as per
148 Cum 938.00
Table 400.1
Well graded granular sub-base materialsGrade-B as per
149 Cum 924.00
Table 400.1
Well graded granular sub-base materialsGrade-C as per
150 Cum 914.00
Table 400.1
Well graded granular sub-base materials Grade-A as per
151 Cum 920.00
Table 400.2
Well graded granular sub-base materials Grade-B as per
152 Cum 938.00
Table 400.2
Well graded granular sub-base materials Grade-C as per
153 Cum 946.00
Table 400.2
154 Aggregate Grading - 1 90 mm to 45 mm cum 952.00
155 Aggregate Grading - II 63 mm to 45 mm cum 999.00
156 Aggregate Grading - III 53 mm to 22.4 mm cum 1067.00
157 Type A 13.2 mm for Grading-1 cum 1231.00
158 Type B 11.2 mm for Grading 2 cum 1213.00
159 Binding Material for grading 1,2 material cum 600.00
160 Stone Screening Type A 11.2 mm for Grading-2,3 cum 1213.00

Kankar Laterite,Dhandla and naturaly accuring gravels,
161 cum 376.00
querry waste as per table 400.13
12
162 Filter media as per specification cum 751.00
163 Wire brushes (with thick wire) Each 50.00
164 Soft brush Each 40.00
165 Bitumen (S-90) Tonne 50100.00
166 Crushed stone chipping 13.2 mm nominal size Cum 1220.00

Crushed stone chipping of 6.7 mm size 100 per cent
167 cum 1231.00
passing 11.2 mm
Crushed stone coarse aggregates, grading will be as per
168 cum 1220.00
Clause 1501.2.4.1 (Table 1500.1) of specification
169 Interlocking paver blocks 40 mm thick Sq M 450.00

Interlocking Concrete Block Pavements having
170 sqm 620.00
thickness 80 mm
Interlocking Concrete Blcok Pavements having
171 sqm 550.00
thickness 60 mm
172 Edge blocks 60 mx2 m 70.00
RCC pipe NP2 concrete pipe including collar 900
173 m 3016.00
mm dia
174 m 1908.00
mm dia
175 m 1412.00
mm dia
176 Empty bitumen drums Nos. 100.00
177 PVC pipe 100 mm dia m 150.00

Hard drawn steel wire febric 75x25mm mesh
178 Sqm 465.00
heaving weight not less than 7.75 kg per sqm
179 Galvanised steel barbed wire(IS-278-1962 type-I weighing Qtls 5800.00
180 Tiles : (First quality) Terrazo checkered tiles (Precast 22mm thick)
SqmMedium shade
390.00
181 Tiles : (First quality) plain checkered tiles (Precast 22mm thick)Sqm 315.00
Galvanised mild steel tubes (Medium grade)

182 15 mm nominal bore m 125.00
13
Galvanised mild steel tubes (heavy grade)
192 Galvanised mild steel tee 15 mm Each 30.00
193 Galvanised mild steel plug Each 10.00
194 G I Socket 15 mm Nominal bore Each 15.00
195 G I Elbow 15 mm Nominal bore Each 40.00
196 G I Nipple 15 mm x 2" long Each 30.00
197 G I Nipple 15 mm x 3" Each 35.00
198 G I Nippla 15 mm x 4" Each 40.00
199 G I Nipple 15 mm x 6" Each 60.00
200 G I Nippla 15 mm x 9" Each 85.00
Vtreous china water closet squatting pan (Indian

type W.C Pan) size 580 mm In white colour.
201 Long pattern Each 500.00
202 Orrissa pattern : Each 750.00

vitreous china wash down water closet (European
type W.C. pan) with integral P or S trap
203 Ordinary closet: Each 1,750.00
204 Anglo Indian Each 2,250.00

White vitreous china foot rest for long patterns
205 Each 150.00
quatting pan water closet
Plastic seat and cover for wash down water
closet with C.P. Brass hinges and rubber buffers
(solid type)
206 White plastic seat and cover Each 400.00
14
207 Black plastic Seat and cover. Each 350.00

Vitreous china bowl pattern urinal
Flat back type of size 430mmx260mmx350mm. Size
208 Each 620.00
In white colour
Angle back type of size 370mmx430mmx340mm
218 Each 600.00
size in white colour
Sqatting plate urinal size 450x350mm of white
219 Each 750.00
vitreous china
Wite vitreous china automatic flushing cistern of
220 Each 700.00
capacity 5 litres with fittings
221 C.I or M.S bracket Pair 100.00
222 15mm bore C.P brass tube Metre 170.00

White vitreous china flat back wash basin 630mm x
223 Each 1,000.00
450mm size
White vitreous china flat back wash basin
224 Each 800.00
550mmx400mm size
White vitreous chinaCircular 460mm dia
225 Each 1,200.00
(Countertop) wash basin
226 White vitreous china padestal for wash basin Each 720.00
227 C.P Brass waste 32mm dia Each 90.00
228 Bevelled edge mirror 600mmx450mm Each 480.00
229 600mmx450mm,6mm thick A,C or plywood sheet Sqm 400.00
C.P Brass towel rail 600mmx20mm together with a

230 Each 500.00
pair of C.P brass brackets to fit the size of towel rail
Glass shelf with a C.P. Brass guard rail and C.P.

231 Each 700.00
brass brackets 600mmx120mm
232 C.P brass toilet paper holder of standard size Each 450.00
233 Chromium plated brass soap dish Each 300.00
234 PVC plug 15 mm dia Each 10.00
235 15mm dia C.P. Brass bib tap wt. 400 gms. Each 500.00
236 15mm dia C.P Brass pillar tap wt. 400 gms. Each 650.00
237 CP brass angle valve 15mm without nuts and pipe Each 650.00
238 C.P. stop cock 15mm dia wt. 400 gms. Each 650.00
15mm P.V.C connection pipe 30cm length / 45 cm
239 Each 80.00
length
15
C.P connection pipe 15mm nominal size bore 30cm
240 Each 250.00
length
Brass full way valve:
241 15mm bore Each 300.00
G.I. Union of following sizes :

PVC water storage tank with cover and locking
Litre 7.00
arrangement.
PVC Floor traps.
254 110 mm X 90 mm. Each 250.00
255 110 mm X 75 mm. Each 150.00
PVC pipes.
256 150 mm dia. Mtr. 350.00
257 110 mm dia. Mtr. 190.00
258 90 mm dia. Mtr. 150.00
258 75 mm dia. Mtr. 130.00
PVC door tees.
259 150 mm dia. Each 150.00
260 110 mm dia. Each 125.00
261 75 mm dia. Each 95.00
PVC door bends
16
262 150 mm dia. Each 145.00
263 110 mm dia. Each 130.00
264 75 mm dia. Each 90.00
PVC plain tee
265 150 mm dia. Each 105.00
266 110 mm dia. Each 90.00
267 75 mm dia. Each 60.00
PVC collers.
268 150 mm dia. Each 50.00
269 110 mm dia. Each 40.00
270 75 mm dia. Each 25.00
PVC plain bends.
271 150 mm dia. Each 70.00
272 110 mm dia. Each 65.00
273 75 mm dia. Each 35.00
PVC clamps.
274 150 mm dia. Each 55.00
277 110 mm dia. Each 30.00
278 75 mm dia. Each 25.00
PVC P or S trap.
279 150 mm dia. Each 225.00
280 110 mm dia. Each 190.00
PVC reducer.
281 150 mm X 110 mm dia. Each 65.00
282 110 mm X 90 mm dia. Each 55.00
283 110 mm X 75 mm dia. Each 50.00
284 90 mm x 75 mm dia. Each 35.00
17
Stailess steel Kitchen sink with drain board.
285 610 x 510 mm with boul depth 200 mm. Each 3,300.00
286 610 x460 mm with boul depth 200 mm. Each 3,100.00
287 470 x 420 mm with boul depth178 mm. Each 1,850.00
PTMT Coloured / white high density polythelene /

poly propylene 10 litres capacity ( full flush)
288 Each 930.00
European standard control low level flushing cistern
with fittings
PTMT automatic flushing cistern .
289 5 litres net capacity. Each 630.00
290 10 litres net capacity. Each 740.00
PTMT waste units:-
291 PTMT waste coupling 32 mm. Each 50.00
PTMT urinal waste :-
292 PTMT waste coupling 32 mm. Each 70.00
293 PTMT grating round 100 mm. Each 30.00
18
CHAPTER – 3
USAGE RATES OF MACHINERIES
19
20
CHAPTER -3
BASIC RATES OF MACHINERY.
Sr. No. Machinery Unit Rate
Drilling Equipment : (AIR compressor with ganiting

1 Day 3,720.00
complete)
2 Truck 8 t capacity hour 700.00
3 Crane hour 1,000.00
4 Front end-loader 1 cum bucket capacity @ 45 cum per hour hour 1,281.00
5 Crow bars 2 nos not less than 40 mm dia (hire-charges) Per Hour 1.50
5 Dozer D-50 for spreading @ 200 cum per hour hour 6,285.00
6 Dozer D-50 @ 50 cum per hour (cutting with pushing) hour 3,160.00
7 Motor grader for grading @ 200 cum per hour hour 3,513.00
8 Motor Grader 110 H.P. @50 cum/hr for spreading . hour 2,318.00
9 Water tanker 6 kl capacity hour 500.00
10 Three wheel 80-100 kN Static Roller hour 741.00
Hydraulic Excavator 0.9 cum bucket capacity @ 60 cum

11 hour 1,843.00
per hour
12 Tipper 5.5 cum with 10 t capacity hour 700.00
13 Tractor with Trolley hour 581.00
14 Tractor with ripper attachment hour 687.00
Tractor Mount grader @ 25 cum per hour hour 1,192.00
Tractor with Rotavator 25 cum per hour hour 688.00
15 Hydraulic broom @ 1250 sqm per hour hour 528.00
16 Air Compressor 210 cfm hour 465.00
Bituminus emulsion pressure distributor @ 1750 sqm per

17 hour 1,569.00
hour
Bitumen boiler oil fired capacity 1000 litre fitted with spray
18 hour 1,048.00
set
21
Sr. No. Machinery Unit Rate
19 Mixall 6/10 T capacity hour 2,519.00
20 Concrete mixer 0.4/0.28 cum capacity hour 350.00
22
CHAPTER – 4
MORTARS
23
Chapter - 4
MORTARS
Notes : -
1 These rates are inclusive octroi, royalty etc.

2 Water charges have been allowed on the cost of the Mortar under basic
rates but this has been allowed in the Analysis of complete item in which
these Mortars are used.
24
CHAPTER - 4
MORTAR
Labour Through
Sr. No. MNGREGA/HPSR Item No. Description of items Unit
Rate Rate
MORTAR
1 MR2661 0411 Cement mortar 1:3 (1 cement :3 sand) C.um 208.30 4763.10
2 MR2662 0412 Cement mortar 1:4 (1 cement :4 sand) C.um 208.30 3905.10
3 MR2663 0413 cement mortar 1:5 (1 cement :4 sand) C.um 208.30 3443.10
4 MR2664 0414 cement mortar 1:6 (1 cement :6 sand) C.um 208.30 3047.10
23
25
26
CHAPTER – 5
CARRIAGE OF MATERIAL
27
Chapter 5
LABOUR INCLUDING LOADING, UN-

LOADING AND STACKING
Notes : -
1 (a) The distance shall be measured in units of 50
meters upto 1 km. and in units of 1/2 km. for
distance beyond 1 km.
(b) The units of distance more than 25 meters but less
than 50 meters shall be taken as 50 meters (upto a
total distance of 1 km.) and the distance less than
20 meters shall be ignored. Similarly the units of
distance more than 1/2 km. but less than 1 km.
shall be taken as 1 km. and the distance less than
1/2 km. shall be ignored for distance more than 1
km.
2 Unless otherwise stated, the carriage rates include
loading and un-loading.
3 The payment shall be made on the basis of length
of route most practicable and most economical.
This shall be decided by the Engineer-in-charge as
per site conditions.
4 The unit rates are applicable to net quantities.
28
CHAPTER - 5
CARRIAGE OF MATERIAL BY MANUAL LABOUR I/C LOADING AND UNLOADING AND
STACKING LIGHT MATERIALS DATA SHEETS FOR ANALYAIS OF RATES
S.No. Material unit Rate Beldar
1 2 3 4 6
1 Earth, Sand & stone agg. Below 40 mm
For first 50 mtrs. 1 Cum 60.48 0.329 No.
For every addl. lead of 50 mtr. or part these of
1 Cum 25.20 0.137 No.
beyond 50 mtrs upto 0.50 Km
For 100 mtrs 1 Cum 85.68 0.466 No.
For 1 Km 1 Cum 539.31 2.931 No.
Beyond 1 km per every 1/2 km 1 Cum 269.66 1.466 No.
2 Stone agg. Above 40 mm
1 Cum 27.24 0.150 No.
For 100 mtrs 1 Cum 92.63 0.503 No.
For 1 Km 1 Cum 583.04 3.169 No.
3 Soiling stone & stone for filling crates
1 Cum 25.20 0.140 No.
For 100 mtrs 1 Cum 85.68 0.466 No.
For 1 Km 1 Cum 539.31 2.931 No.
4 Bricks
For first 50 mtrs. 1000 Nos 112.90 0.614 No.
1000 Nos 47.04 0.260 No.
For 100 mtrs 1000 Nos 159.95 0.869 No.
For 1 Km 1000 Nos 1006.71 5.471 No.
Beyond 1 km per every 1/2 km 1000 Nos 503.36 2.740 No.
5 Cement
For first 50 mtrs. 1 Tonne 29.71 0.161 No.
1 Tonne 12.38 0.070 No.
For 100 mtrs 1 Tonne 42.09 0.229 No.
29
S.No. Material unit Rate Beldar
For 1 Km 1 Tonne 264.92 1.440 No.
Beyond 1 km per every 1/2 km 1 Tonne 132.46 0.720 No.
6 Steel including C.G.I. and absestos sheets.
For first 50 mtrs. 1 Tonne 62.72 0.341 No.
1 Tonne 26.13 0.142 No.
For 100 mtrs 1 Tonne 88.86 0.483 No.
For 1 Km 1 Tonne 559.29 3.040 No.
Beyond 1 km per every 1/2 km 1 Tonne 279.64 1.520 No.
30
BUILDING (CIVIL WORK).
CHAPTER 6
EARTH WORK
31
CHAPTER 6
EARTH WORK
Notes. Measurement of Lead and Lift.
1 These shall be measured from the centre of gravity of the excavated earth to that
of the placed earth. For such measurements, the earthwork proposed to be
worked upon shall be demarcated in sections economically for placement of
excavated earth. The mean lead and lift shall be calculated separately for such
sections. When earth has to be carried over a spoil bank and dumped beyond it,
the mean lift would be the difference in level between the centre of gravity of
the excavated earth and top of the spoil bank omitting the dowel. The rate
provided for additional leads are valid for distances upto 300 meters for
disposals done manually. However, the most economical mode i.e. manual
(including the use of wheel barrows), animal transport or mechanical transport
shall be decided by the Engineer-in-Charge and paid as such according to
relevant schedule of rates for manual, animal or mechanical transport.
2 These rates do not include the cost of pumping out of water which shall
normally be done departmentally. Whenever work is to be got done by contract,
the rate shall be settled before execution on the individual case.
3 The labour rates do not include the expenses on account of compressor.
4 The classification of earth work shall be done by the Engineer-in-Charge and
the intermediate classification like P.J/J.B/P.J.B., etc. shall be paid
proportionately.
32
CHAPTER - 6
EARTH WORK
Labour Through
Rate Rate
5 07010000 Cutting in earth work and disposal of
excavated earth upto a lead of 20 meters:-
60.7010100 07010100 Spade Work: C.um 61.27

60.7010200 07010200 Pick Work:- C.um 92.00
60.7010300 07010300 Jumper Work:- C.um 188.89 213.45
60.7010401 07010401 Soft Rock C.um 142.28 240.53
60.7010402 07010402 Hard Rock: C.um 183.68 334.21
07010500 Chiseling/wedging out of rock where
blasting is prohibited:
60.7010501 07010501 Soft Rock:- C.um 441.34
60.7010502 07010502 Hard Rock. C.um 662.14
6 07020000 Excavation in earth work and disposal of all
excavated earth upto a lead of 20 meters
and lift upto 1.50 meters, disposed earth
to be levelled and neatly dressed:
60.7020100 07020100 Spade Work: C.um 75.44

60.7020200 07020200 Pick Work: C.um 107.27
60.7020300 07020300 Jumper Work: C.um 225.69 250.25
07020500 Chiseling/Wedging out of rock (where
blasting is prohibited):
60.7020501 07020501 Soft Rock. C.um 478.14
60.7020502 07020502 Hard Rock. C.um 717.35
7 07040000 Excavation in foundations, trenches etc., in
earth work, lift upto 1.50 Meters stacking
the excavated soil not more than 3 meters
clear from the edge of the excavation and
then returning the stacked soil in 15cm.
layers, when required in to plinths sides of
foundations etc., consolidating each
deposited layer by ramming and watering
and then disposing of all surplus excavated
earth as directed with in a lead of 20
meters.
60.7040100 07040100 Spade Work. C.um 129.24

60.7040200 07040200 Pick Work. C.um 160.61
60.7040300 07040300 Jumper Work: C.um 299.29 323.85
07040400 Blasting Work.
60.7040401 07040401 Soft Rock. C.um 234.28 340.47
60.7040402 07040402 Hard Rock. C.um 298.68 463.22
07040500 Chiseling/Wedging out of rock (where
blasting is prohibited:
60.7040501 07040501 Soft Rock. C.um 700.04
60.7040502 07040502 Hard Rock : C.um 1050.02
8 07050000 Excavation in drains and channels etc. in
earth work including dressing of side and
bed and disposing of excavated earth upto
a lead of 20 meters and lift upto 1.50
meters disposed earth to be levelled and
neatly dressed:
60.7050100 07050100 Spade Work: C.um 103.47
60.7050200 07050200 Pick Work. C.um 126.59
33
Labour Through
Rate Rate
60.7050300 07050300 Jumper Work. C.um 240.41 264.97
07050400 Blasting Work.
60.7050401 07050401 Soft Rock. C.um 191.40 297.60
07050500 Chiseling/wedging out of rock (where
blasting is prohibited).
60.7050501 07050501 Soft Rock. C.um 631.23
60.7050502 07050502 Hard Rock. C.um 926.00
9 07060000 Excavation in earth work and filling in 15
cm. layers in foundation and plinths
including ramming, watering and
consolidating upto a lead of 20 meters and
lift upto a 1.5 meters.
60.7060100 07060100 Spade Work. C.um 110.19
60.7060200 07060200 Pick Work. C.um 119.53
10 60.7070000 07070000 Filling in plinth with sand under floors
including watering, ramming, consolidating
and dressing complete. C.um 51.55 1179.21
11 60.7100100A 07100100 Dressing the ground including cutting and
filling upto 15 cm. Spade Work: S.qm 4.60
12 60.7110100 07110100 Clearing jungle including uprooting of rank
vegetation, grass, brush wood, trees and
saplings of girth upto 30 cm. measured at a
height of 1 meter above ground and
removal of rubbish upto a distance of 20
meters outside the periphery of the area
cleared: Upto 30 cm Girth:
S.qm 5.96
13 60.7150000 07150000 Removal of slips in all kinds of soil
(including saturated soil but excluding
boulders and rocky portion requiring
blasting upto a distance of 20 meters
disposing of un-serviceable materials,
stacking serviceable materials and neatly
dressing the surface. C.um 104.55
14 60.7160000 07160000 Removal of boulders on rocky portion of
slips (Where blasting is required) upto a
distance of 20 meters disposing of un-
serviceable materials, stacking serviceable
materials and neatly dressing the surface.
C.um 142.28 240.53
34
CHAPTER -7
FORM WORK
35
CHAPTER - 7
FORM WORK
Notes :-
1 The rates are applicable to all conditions of working and at
all floors. Nothing extra shall be payable on account of extra lift
of materials involved. The rates shall include the cost of materials
and labour for various operations involved such as:-
(a) Splayed edging and notching, allowances for overlaps and

passing at angles, centering, shuttering, strutting, propping,
bolting, nailing, wedging, easing, striking and removal.
(b) Filleting.
(c) Dressing with oil
(d) Raking or circular cutting.
36
CHAPTER - 7
FORM WORK
Labour Through
Rate Rate
15 0805000000 Providing form work with steel plates
3.15mm.thick welded with angle iron in
frame 30x30x5mm. So as to give a fair
finish including centering, shuttering,
strutting and propping etc. with wooden
battens.
60.805010000 0805010000 Foundation, footings basis of columns etc. S.qm 41.58 178.99
and mass concrete.
0805020000 Flat surfaces such as soffits of suspended
floors, roofs, landings and the like.
60.805020100 0805020100 Floors etc.upto 200mm. In thickness. S.qm 82.71 286.41
60.805030000 0805030000 Vertical surfaces such as walls (any
thickness) partitions and the like including
attached pilasters buttresses, plinth and
string courses and the like. Detail of cost
for a parapet wall
S.qm 69.85 222.37
60.805040100 0805040100 Columns, pillars, posts and struts Square,
rectangular or polygonal in plan.
S.qm 112.10 268.81
60.805050000 0805050000 Stair cases with sloping or stepped soffits
excluding landing. S.qm 101.53 257.84
0805060000 Beams, cantilever, girders and lintels.
60.805060100 0805060100 Sides and soffits of beams, beam,
haunchings, cantilevers, bressumers and
lintels not exceeding 1 Mtr. In depth in all
heights from floor. S.qm 108.77 294.12
60.805070100 0805070100 Edges of slabs and breaks in floors and
walls: R.mt 15.57 98.73
37
38
CHAPTER 8
CONCRETE
39
CHAPTER 8
CONCRETE
Notes :-
1 The labour and through rates include the cost of water. Where water is
supplied free by the Department the rates shall be decreased
accordingly.
2 The labour as well as through rates of concrete include the cost of
curing.
3 The rates given below are for hand-mixed concrete. In case
mechanical mixer is employed the labour as well as through rates shall
be increased by Rs. 25.00 per cubic meter.
4 The rates give below are for non-vibrated concrete. In case vibrator
is used for compacting the concrete, the corresponding through
rates for concrete shall be increased by Rs . 25.00 per cubic meter.
5 The rates give below are for both cast in-situ and precast work, the
precast work include, the cost of hoisting and fixing in position.
6 The labour rates given in the Chapter include the cost of water,
tools and plants, scaffolding and cost of good earth for mud mortar
wherever required.
7 All rates for cement concrete/reinforced cement concrete have been
worked out using crushed stone aggregate.
40
CHAPTER -8
CONCRETE
Labour Through
Rate Rate
16 60.9120000A 09120000 Providing and laying cement concrete
1:3:6 (1 cement : 3 sand : 6 graded stone
aggregate 40 mm nominal size) excluding
cost of centring and shuttring in
Foundation and plinth C.um 585.63 3598.31
17 60.09130100 09130000 Providing and laying cement concrete
1:4:8 (1 cement:4 sand:8 graded stone
aggregate 40 mm nominal size) and curing
complete excluding cost of form work in:
09130100 Foundation and plinth: C.um 585.63 3259.99

1:4:8 (1cement : 4 sand : 8 Graded stone
complete excluding cost of form work in
foundation and plinth in breast and
retaining walls etc. C.um 585.63 3398.24
1:5:10 (1cement : 5 sand : 10 Graded stone
foundation and plinth C.um 577.85 2993.74
1:6:12 (1 cement: 6 sand : 12 graded stone
complete excluding cost of centring and
shuttering in
21 60.0921010A 09210000 Providing and laying cement concrete
1:3:6 (1 cement : 3 sand : 6 graded stone
aggregate 20 mm nominal size) excluding
cost of form work in Foundation and
plinth C.um 585.63 3800.16
1:2:4 (1 cement: 2 Sand: 4 graded stone
aggregate 20mm nominal size) and curing
23 09320000 Providing and laying cement concrete
1:1½:3 (1cement :1½sand :3 graded stone
aggregate 20mm. nominal size) and curing
complete excluding cost of form work and
reinforcement for feinforced concrete
work in:
60.9320000 09320000 Walls including attached buttresses,
pilasters and thier caps and bases string
courses etc. upto floor two level. C.um 693.03 4931.76
60.9320300 09320300 Column, pillars, posts and struts upto floor
two level : C.um 1070.04 5273.74
60.0952010000 0952010000 Foundation footings bases of columns and
the like and mass concrete. C.um 684.02 4928.40
41
Labour Through
Rate Rate
60.0952020000 0952020000 Suspended floors roofs, landings and
shelves and their supports, balconies,
beams, girders, bressumers and cantilevers
upto floor two level. C.um 719.37 4960.49
60.952030000 0952030000 Stair cases (except spiral stair case)
excluding landing but including preparing
of the surface and finishing of nosing upto
floor two level. C.um 1101.06 5301.88
24 60.9410200 09410200 Providing mild steel / Tor steel
reinforcement for R.C.C. work including
bending, binding and placing in position
complete upto all floor levels : Kg 11.94 64.19
42
CHAPTER – 9
BRICK WORK
43
Chapter - 9
B RICK WORK (WITH CONVENTIONAL BRICKS)
Notes -:
1 The labour rates as well as through rates include the cost of water, if
supplied free by Department , the rates will be reduced accordingly.
2 The labour rates include the cost of water, tools and plants, scaffolding
(labor and material) and cost of good earth for mud mortar.
3 The rates are applicable for conventional bricks with sizes in stated
F.P.S Units. These rates are not applicable for modular bricks.
4 The rates are applicable for laying of brick in foundations and plinth/
floor level two . The plinth level shall be taken as 1.5 meters above
ground level. The maximum storey-height shall be taken as 3 meters. In
case of structure like retaining walls / breast walls, height of 4 mtrs above
ground level shall be reckoned as floor level two. This height shall be 6
meters above ground level in case piers and abutments. Similar
procedure for demarcation of works done in basement shall be adopted for
increase of rates.
44
CHAPTER - 9
BRICK WORK
Labour Through
Rate Rate
25 1001000 Brick work using common burnt clay
building bricks in foundation and plinth in :
60.1001000 10010902 Cement Mortar 1:6 (1 Cement : 6 Sand)
C.um 765.60 3867.76
26 60.10020102 10020102 Extra for brick work in Super-structure
above plinth level (Second Class Bricks).
C.um 130.07 0.00
27 10040101 Half brick masonry in common burnt clay
building bricks in:
60.10040101 10040202 Cement Mortar 1:3 (1 cement:3 sand) S.qm 107.10 523.28
Second Class Bricks
60.10040302 10040302 Cement Mortar 1:4 (1 cement:4 sand) S.qm 107.21 499.01
Second Class Bricks
28 60.10050000 10050000 Extra for half brick masonry in super- S.qm 25.30 -
structure above plinth level
29 60.10070200 10070200 Half Brick thick honey comb brick work S.qm 63.22 300.44
with common burnt clay building bricks in
cement mortar 1:4 (1 Cement : 4 sand)
Second Class Bricks
45
46
CHAPTER – 10
STONE MASONRY, PRECAST CONCRETE
AND BLOCK MASONRY .
47
Chapter XI
STONE MASONRY, PRECAST CONCRETE, BLOCK

MASONRY AND MARBLE WORK
Notes -:
1 The labour rates and through rates are applicable for the stones
quarried in blocks and un-dressed.
2 The labour rates include the cost of water, tools and plants, labor and
materials for scaffolding and centering shuttering, Wherever
required and cost of good earth for mud mortar.
3 Where water is supplied free by the department, the rates shall
be decreased accordingly.
4 The labor rates including the cost of dressing of stones and laying
also.
5 The rates are applicable for laying of stone in foundations and plinth \
floor level two. The plinth level shall be taken as 1.5 meters
above ground level. The maximum story height shall be taken as
3 meters. In case of structures like retaining walls / breast walls
height of 4 meters above ground level shall be reckoned as floor
level two. This height shall be 6 meters above ground level in case of
piers and abutments. Similar procedure for demarcation of works
done in basement shall be adopted for increase of rates.
48
CHAPTER -10
STONE MASONRY PRECAST CONCRETE BLOCK MASONRY WORK
Labour Through
Rate Rate
30 60.1102000000B 1102000000 Construction of dry rubble masonry in C.um 233.74 1558.86
breast wall and retaining walls revetment
walls and parapets etc.
31 60.1104020000C 1104000000 Random rubble masonry/polygonal rubble
masonry (uncoursed/brought to courses)
with hard stones of approved quality in
foundation and plinth in
1104020000 Cement Mortar 1:6 (1 cement:6 sand) C.um 992.85 3387.49
32 60.110500000 110500000 Random rubble masonry/polygonal rubble
masonry (Uncoursed/brought to courses)
with hard stone of approved quality in
foundation and plinth in cement mortar
1:6 (1 cement:6 sand) in breast walls and
retaining walls.
C.um 992.85 3387.49
33 60.11070203000C 1107020000 Squared rubble masonry coursed with
hard stone of approved quality in
foundation and plinth including foundation
and plinth including raking out joints in:-
11070203000 Cement Mortar 1:6 (1 cement : 6 sand) C.um 1924.07 4882.66
34 60.1108010100 1108010000 Extra for squared rubble masonry coursed

with hard stone of approved quality in:-
1108010100 Superstructure above plinth level and upto C.um 155.41 155.41
floor two level :
35 60.1131010000 1131010000 Boulder filling dry hand packed tightly as in C.um 147.20 913.20
wire crate apron bund (wire crates to be
measured separately).
36 60.1131030100 1131030000 Wire crates made of G.I. wire filled with
boulders with square cut faces against the
wire (Boulder filling to be measured and
paid for separetaly).
1131030100 G.I. Wire 4mm thick corresponding to SWG-
8
25cm.x7.5cm. mesh (diagonal dimension). S.qm 31.99 209.00
60.1131030102 1131030102 15cm. x 15cm. mesh. S.qm 17.38 159.94

37 60.1133000000 1133000000 Stone filling behind retaining walls : C.um 165.60 1008.20
38 60.113900000 1139000000 Precast concrete block masonry (including
quion blocks,jamb blocks, closer etc.) with
solid concrete blocks of approved size
made of cement concrete 1:3:6 (1
cement:3 sand:6 graded stone aggregate
40mm and down gauge) foundation and
plinth upto floor level two in :-
1139010000 Cement Mortar 1:6 C.um 1350.09 4436.54
49
Labour Through
Rate Rate
39 60.114100000 114100000 Precast concrete block masonry in
partition walls 10 cm. thick with solid
block of approved size including quion
blocks, jamb blocks, closer etc. made
of cement concrete 1:3:6 (1 cement:3
sand:6 graded stone aggregate 40mm
and down gauge) in :-
1141010000 Cement Mortar 1:6 S.qm 102.30 461.00

40 60.1161000000 1161000000 Providing and laying 20 cm. thick S.qm 576.50 1295.41
composit stone masonry with stone
facing of chisel dressed stones one line
dressed in cement mortar 1:6(1 cement
:6 sand) and concrete backing with
cement concrete 1:3:6 (1 cement: 3
sand: 6 graded stone aggregate 20
mm. nominal size) on inner face of
walls including centring, shuttering and
propping complete.
50
CHAPTER – 11
WOOD WORK
51
Chapter 11
WOOD WORK
Notes :-
1 The through rates include all wastage of timber in sawing and
cutting and sawing charges.
2 The labor rates include the cost of tools and plants and
scaffolding wherever required .
52
CHAPTER -11
WOOD WORK
Labour Through
Rate Rate
41 MR2612 1210200000 Conversion of timber from sleeper to
scantling
1210203000 1st class deodar wood. C.um 92483.00
MR2613 1210204000 2nd class deodar wood. C.um 80983.00
MR2614 1210205000 1st class kail C.um 63733.00
MR2615 1210206000 2nd class kail C.um 57983.00
MR2616 1210209000 sal wood. C.um 52233.00
Conversion of timber from sleepers to

42 1210300000
planks.
MR2676 1210303000 1st class deodar wood. C.um 95085.00
MR2677 1210304000 2nd class deodar wood. C.um 83285.00
MR2678 1210305000 1st class kail wood C.um 65585.00
MR2679 1210306000 2nd class kail wood C.um 59685.00

43 60.1200104000 1200100000 Providing woodwork in frames of doors,
windows, clerestory, windows and other
frames wrought, framed and fixed in
position.
1200104000 2nd class deodar wood
C.um 5015.00 90497.06
60.1200109000 1200109000 Sal Wood.
C.um 5015.00 60149.83
44 60.1200204000 1200200000 Providing wood work in frames of false
celling partitions etc.sawn and put-up in
position.
1200204000 2nd Class kail wood. C.um 3138.16 64057.01
45 60.1200302000 1200300000 Providing wood work in trusses, purlins,

rafters, posts, post plates, wall plates and
the like wrought framed,hoisted and fixed
in position.
1200302000 2nd class deodar wood. C.um 5272.86 90112.19
60.120030300 1200303000 1st class Kail wood. C.um 5272.86 72040.76
46 60.1200500000 1200500000 Providing and fixing panelled glazed or

panelled and glazed shutters for doors
windows and clerestory windows.
including black enamelled iron butt hinges
with necessary screws.
1200503000 40mm thick.
1200503040 2nd Class deodar wood. S.qm 594.08 3742.86

60.1200503060 1200503060 40mm thick
53
Labour Through
Rate Rate
2nd Class Kail wood wood. S.qm 594.40 2912.81
60.1200504040 1200504040 35mm thick.
2nd Class deodar wood. S.qm 594.39 3434.70
60.1200504060 1200504060 35mm thick.
2nd Class Kail wood wood. S.qm 594.18 2691.53
47 60.1200901000 1200901000 Providing and fixing flush door shutters
decorative type core of block board
construction with frames of first class hard
wood and well matched first class indian
teak plyveneering with vertical grains or
cross bends and face venecring on both
faces of shutters.
40mm thick including black enamelled S.qm 168.55 2503.32
M.S. butt hinges.
48 60.1201001000 1201001000 Providing and fixing flush door shutters
interior grade, commercial type, core of
block board construction with frame of
first class hard wood and well matched
commercial ply veneering with vertical
grains of cross bands and face veneers on
both faces of shutters.
40mm thick including black enamelled S.qm 168.55 1751.54
M.S.
49 60.1201901040 1201900000 Providing and fixing wire gauge shutters
using galvanised M.S. wire gauge of I.S.
gauge designation 85g. With wire of dia
0.56mm for doors, windows and
clerestorey windows including bright
finished black enamelled iron hinges with
necessary screws.
1201901040 40mm thick.
2nd class Deodar wood. S.qm 278.91 2828.42

60.1201902000 1201902000 30mm thick.
1201901040 2nd class Deodar wood. S.qm 214.35 2262.61

50 60.1202703000 1202703000 Providing and fixing plain lining with
tongued and grooved jointing and
screws(frame work and cover fillets to be
measured and paid for separately) with.
First class deodar wood. 12 mm thick. S.qm 159.67 1529.84
51 60.1203203000 1203200000 Providing and fixing standard quality hard

board sheet lining with butt jointing and
nails(frame work and cover fillets to be
measured and paid for separately).
1203203000 6 mm thick. S.qm 28.47 395.97
54
Labour Through
Rate Rate
52 60.1203300000 1203300000 Providing and fixing ply wood lining with
butt jointing and nails (frame work and
coner fillets to be measured and paid for
separately).
1203302000 6 mm thick. S.qm 39.22 359.53
53 60.1203500000 1203500000 Providing and fixing commercial ply wood

celing of approved quality with butt
jointing and nails(frame work and cover
fillets to be paid
for separately).
1203503000 6 mm thick. S.qm 22.52 349.52
54 6.1203903000 1203900000 Providing and fixing plain asbestos cement
sheet ceiling of approved quality with butt
jointing and wood screws(frame work and
fillets to be measured and paid for
separately).
1203903000 6 mm thick. S.qm 31.74 352.24
55 60.1204000000 1204000000 Providing and fixing wooden plank ceiling
with tongued and grooved jointing and
wood screws (frame work and cover fillets
to be measured and paid for separately).
1204003000 1st class kail wood.

1204003010 12 mm thick. S.qm 147.85 1030.17
56 60.1204700000 1204700000 Providing and fixing plain square edged
cover fillets(beading) 40mmx12mm
section with wood screws in ceiling and
lining including mitring at junctions.
1204702000 1st class deodar wood. R.mt 16.50 75.22
57 60.1205900000 1205900000 Providing 50x50x50mm wooden plugs
including cutting bricks/stone work and
fixing in cement mortar 1:3 (1 cement : 3
sand) and making good the walls etc.
1205902000 2nd class deodar wood. Each 6.24 17.82

58 60.1206100000 1206100000 Providing and fixing wooden ground 50x25
mm including priming coat complete.
1206102000 2nd class deodar wood. S.qm 46920.63 161798.57

59 60.1207201000 1207100000 Providing and fixing M.S. grills of require
pattern in wooden frames of windows etc.
with M.S. Flats, square or round bars with
round headed bolts and nuts or by screws.
1207201000 Plain grill. Kg 24.56 88.07

60 60.1207400000 1207400000 Providing and fixing hard drawn steel wire
fabric 75x25 mm mesh of weight not less
than 7.75kg per sqm. To window frames
etc. including 60x20mm bending of Ist
class deodar wood.
S.qm 130.03 1041.65
55
Labour Through
Rate Rate
61 60.1207500000 1207500000 Providing and fixing fly proof galvanised
M.S. wire gauge of I.S. gauge designation
85 g with wire of dia 0.56 mm to windows
and clerestory windows including 60x20
mm beading of.
1207504000 2nd class deodar wood. S.qm 64.20 914.97

62 60.1207800000 1207800000 Providing 40x3 mm flat iron hold fast
40mm. Long including fixing to frame with
10m diameter bolts nuts and wooden
plugs and embeding in cement concrete
block 30x10x15cm. 1:3:6 (1 cement : 3
sand : 6 graded stone aggregate 20mm
nominal size). Each 20.17 66.06
63 60.1209100000 1209100000 Providing and fixing 75mm x60mm
moulded hand rails in straight length
complete.
1209004000 2nd class deodar wood. R.mt 100.20 751.70
64 60.1210400000 1210400000 Providing and fixing anodized aluminium
sliding door bolt anodized colour and
shade with bolts and nuts screws etc.
complete.
1210401000 300x16mm. Each 17.30 268.80
60.1210402000 1210402000 250x16mm. Each 17.30 218.92
65 60.1210500000 1210500000 Providing and fixing aluminium tower bolts
(berrel type) anodized trans parent or
dyed to required shade and colour with
screws etc. complete.
1210502000 250x10mm. Each 3.46 98.75
60.1210503000 1210503000 200x10mm. Each 3.46 88.88
60.1210504000 1210504000 150x10mm. Each 3.46 78.81
66 60.1210600000 1210600000 Providing and fixing aluminium handles
anodized transparent or dyed to required
colour shade with necessary screws etc.
complete.
1210601000 125 mm. Each 2.08 54.80
60.1210602000 1210602000 100 mm. Each 2.08 44.88
60.1210603000 1210603000 75 mm. Each 2.08 34.82
67 60.121220000 1212200000 Providing and fixing bright finished hard
drawn hooks and eyes.
1212204000 150 mm. Each 2.08 49.92
68 60.1214500000 1214500000 Providing and fixing oxidized M.S. sliding
door bolts with nuts and screws etc.
complete.
1214501000 300x16mm. Each 6.68 188.25
60.1214502000 1214502000 250x16 mm. Each 6.68 178.05
69 0.0000000000 1214700000 Providing and fixing M.S. tower bolts
(barrel type) with necessary screws etc.
complete.
1214702000 200x10mm. Each 2.67 77.70
60.1214703000 1214703000 150x10mm. Each 2.67 66.47
60.1214704000 1214704000 100x10mm. Each 2.67 56.50
70 60.1214800000 1214800000 Providing and fixing oxidized M.S. handles
with the necessary screws etc. complete.
1214801000 125mm. Each 1.60 49.10
56
Labour Through
Rate Rate
60.1214802000 1214802000 100mm. Each 1.60 44.09
60.1214803000 1214803000 75mm. Each 1.60 34.10
71 60.1217000000 1217000000 Providing and fixing M.S. safety hasps and
stapples with necessary screws etc.
complete.
1217002000 115 mm. Each 2.14 44.47
72 60.1217200000 1217200000 P/F 12 mm thick prelaminated board both
side bwp phenal bonded exteiro / interior
grade panalled shutters with frame of first
class deodar wood for doors including
bright finished/black enamelled iron butt
hinges with necessary screws 40mm thick
frame. S.qm 541.97 3521.35
73 60.1217300000 1217300000 P/F 12 mm thick prelaminated board both
side bwp phenol bonded exterior / interior
grade shutters withframe of 1st class
deodar wood for cup board including
nickel plated bright finished piano hinges
25mm thick frame. S.qm 525.00 2631.18
74 60.1217700000 1217700000 Providing and fixing 4mm thick Eboard
(Embassed board) Ceiling of approved
quality of ISI Mark i/c fixing to base frames
with screws and clamps etc complete
(frame work for base & cover fillets to be
measured and paid for separately).
S.qm 34.85 665.60
75 60.1217900000 1217900000 Providing and fixing 19mm thick
Commercial Board water proof shutters for
cup boards i/c fixing with nickel plated
piano hinges with screws etc. complete S.qm 142.79 1166.88
76 60.1218000000 1218000000 Providing and fixing 19mm thick water
proof commercial board in shelves/box for
cup board with butt joints & fixing with
nails & screws etc S.qm 46.30 892.30
77 60.1218200000 1218200000 Providing and fixing 1.00mm thick
coloured or plain lamination sheet
(sunmica) on boards/ply wood sheets with
approved adhesive and nails etc complete.
S.qm 72.58 708.58
78 60.1218300000 1218300000 Providing and fixing square edges cover
fillets (beading) 19mmx6mm section i/c
mitring at junctions with wood screws and
nails complete.
12183020000 1st class deodar wood. S.qm 14.95 26.84
57
58
CHAPTER – 12
PAVING AND FLOORING
59
Chapter 12
PAVING AND FLOORING

Notes :-
1 The rate for items involving terrazzo / glazed tiles have been
worked out on the basis of rates as at district headquarters of
Himachal Pradesh State. All other carriage shall be accounted
for separately depending up to locations of the site of work.
The through rates include all wastage and the labor rates
include the charges on account of from work, tools and plants,
scaffolding, sundries and water charges etc.
2 The labor rates and through rates are applicable for glazed tiles of
white shade and of all sizes as required .
3 In case , the coloured glazed patterned tiles are used the labour
rates shall be increased by 20% or through rates shall be
increased by 10% . These rate are not applicable for specially
decorated tiles for which special rates shall be paid, if used.
60
CHAPTER -12
PAVING AND FLOORING:
Labour Through
Rate Rate
79 60.13160400 13160000 Precast terrazzo tiles hydraulic compressed
20 mm thick with marble chips of specified
sizes laid in floors treads of steps and
landings on a bed of 25 mm average
thickness of cement mortar 1:6 (1 cement
:6 sand) jointed with neat cement slurry
mixed with pigment to match the shade of
tiles(wherever required) incliding rubbing
and polishing complete with tiles of
following shades:-
13160400 MEDIUM. S.qm 263.12 894.60

80 60.13160000 13160000 Precast terrazzo checkered tiles hydraulic
compressed 22 mm thick with marble
chips of specified sizes laid in floors treads
of steps and landings on a bed of 25 mm
average thickness of cement mortar 1:6 (1
cement :6 sand) jointed with neat cement
slurry mixed with pigment to match the
shade of tiles(wherever required) incliding
rubbing and polishing complete with tiles
of following shades:-
MEDIUM. S.qm 263.50 917.31

81 60.1316100000 13161000 Precast palin checkered tiles hydraulic
compressed 22 mm thick with marble
chips of specified sizes laid in floors treads
of steps and landings on a bed of 25 mm
cement :6 sand) jointed with neat cement
slurry mixed with pigment to match the
shade of tiles(wherever required) incliding
rubbing and polishing complete with tiles
of medium shades:-
MEDIUM. S.qm 263.71 833.78

82 60.13180000 13180000 Precast terrazzo tiles hydraulic compressed
20 mm thick (with marble chips of
specified sizes) fixed on wall on 10 mm
thick cement plaster 1:3 (1 cement:3 sand)
jointed with neat cement slurry mixed with
pigment to match the shade of tiles
(wherever required) including rubbing and
polishing complete with tiles of following
shades:-
13160400 MEDIUM. S.qm 315.00 956.52
61
Labour Through
Rate Rate
83 60.13190000 13190000 Precast terrazzo tiles 20 mm thick (with
marble chips of specified sizes) in skirting
and risers of steps not exceeding 30 cm in
height on 10 mm thick cement plaster 1:3
(1 cement: 3 sand)jointed with neat
cement slurry mixed with pigment to
match the shade of tiles (wherever
required)including rubbing and polishing
complete with tiles of following shades.:-
MEDIUM. S.qm 336.34 977.76

84 60.13230000 13230000 White glazed tiles 6 mm thick in skirting
risers of steps and dado 12 mm thick
cement mortar 1:3 (1 cement :3 sand) and
jointed with cement slurry.
S.qm 455.80 873.27
85 60.13310101 13310000 Cement concrete flooring 1:2:4 (1 cement :
2 sand: 4 graded stone aggregate 20 mm
nominal size)laid in one layer finished with
a floating coat of neat Cement.
13310101 40 mm thick. S.qm 840.64 250.77

60.13310201 13310201 50mm thick. S.qm 95.36 301.43
86 60.13410300 13410000 25 mm wooden planking tongued and
grooved, in flooring fixing to wooden base
frame with iron screws complete (base
wooden frame to be paid separately).
13410300 First class deodar wood planks. S.qm 160.90 3020.39

60.13410400 13410400 First class kail wood planks. S.qm 160.23 2140.31
87 60.13470000 13470000 Second class brick flooring laid dry and
grouted with cement mortar 1:4 (1 cement
:4 sand) including finishing the joints flush.
13470100 10 cm thick (using conventional brick) S.qm 64.57 433.26

88 60.13510000 13510000 2 mm thick pvc/rubber tiles flooring plain,
coloured, corbed or mosaic or mottled
finish, laid with approved adhesive on sub
floor (damp proofing treatment(to be
measured separately for payment.)
S.qm 69.90 752.40
89 60.13540000 13540000 Kota stone slab flooring 20 mm (average)
thick base of cement mortor 1:4 (1 cement
:4 sand) laid over and jointed with grey
match the shade of the slab. including
rubbing and polishing complete.
13540100 25 mm thick. S.qm 524.05 1361.48
62
Labour Through
Rate Rate
90 60.13550000 13550000 Kota stone slab 25 mm thick in risers of
steps,skirting dado and pillars laid on 12
mm (average) thick cement mortor 1:3 (1
cement :3 sand) and jointed with grey
match the shade of the slabs including
rubbing and polishing complete.
S.qm 600.28 1420.22
91 60.13560000 13560000 20 cm flagged stone flooring laid in
cement mortor 1:5 (1 cement :5 sand) S.qm 84.26 555.16
92 60.13590000 13590000 Providing and fixing Garsa (Kullu) stone
slab 12.5mm.cladding on R.C.C.surface
side as on faces of Arch masonry walls
etc.on 12mm. Thick cement plaster
1:3(1cement:3sand) and jointed with
cement slurry i/c scaffolding etc. complete.
S.qm 382.20 1104.45
93 60.13600000 13600000 Providing and laying spartic ceramic tiles
5.5mm thick in flooring (300 x300mm.size)
treads of steps laid on a bed of 12mm.
thick cement mortar 1:3 (1cement: 3 sand)
finished with flush pointing in white
cement. S.qm 397.66 1205.28
94 60.136500000 136500000 Providing and fixing 2mm thick PVC
antistatic vinyl Flooring plain or coloured,
carbed or mosaic/ metalled finish laid with
approved adhesive on sub-floor (damp
proofing treatment to be paid for
separately). S.qm 69.25 804.25
95 60.1366000000 136600000 Providing and laying red sand stone slab
flooring 40mm average thick on 20mm
average thick base of cement mortar 1:4 (1
cement : 4 sand) laid over and jointed with
grey cement slurry mixed with pigment to
match the shade of the slab i/c rubbing
and granite polish finish complete.
S.qm 611.61 1410.89
96 60.1367000000 1367000000 Providing and laying red sand stone slab in
treads and risers of steps on a bed of
20mm tick cement mortar 1:4 (1 cement :
4 sand) laid over and jointed with grey
match the shade of the slab i/c preparing
of nosing i/c rubbing and granite polish
finish complete.
S.qm 636.74 1415.80
97 60.1368000000 1368000000 Providing and fixing 10mm thick anti skid
water proof stain and impact resistant
heavy duty vitrified tiles Nitco or
equivalent 600x600mmx10mm
manufactured of approved shade and
colour in flooring, treads of steps and
landings laid over 12mm thick cement
mortar 1:3 (1 cement : 3 sand) jointed with
match the shade of tiles as required
complete. S.qm 40.87 1498.72
63
Labour Through
Rate Rate
98 60.1371010000 137100000 Providing and laying heavy duty precast
cement conrete inter locking paver blocks
vibro compacted upto M-50 grade i/c
border or kurb block grey or coloured over
sub-base of concrete with 25mm thick
cement : 4 sand) laid over and jointed with
neat cement slurry mixed with pigment to
match the shade of blocks i/c curing
rubbing & polishing complete (Sub base
concrete floor to be paid for separately).
137101000 40mm thick precast interlocking blocks.

S.qm 260.50 942.25
60.1371020000 1371020000 60mm thick precast interlocking blocks.
S.qm 262.96 1056.35
60.1371030000 1371030000 80mm thick precast interlocking blocks.
S.qm 260.72 1132.27
64
CHAPTER – 13
ROOF COVERINGS
65
Chapter 13
ROOF COVERINGS
Notes :-
1 The labour and through rates include the cost of water, tools
and plants, scaffolding and cost of good earth for mud mortar
wherever required.
66
CHAPTER -13
ROOF COVERING
Labour Through
Rate Rate
99 60.14010200 14010000 Providing corrugated G.I sheet roofing
fixed with galvanised iron J.or L. hooks
bolts and nuts 8 mm diameter with
bitumen and G.I. limpet washers filled with
white lead complete excluding the cost of
purlins refters and trusses.
14010200 0.63 mm thick sheet. S.qm 38.41 670.26
100 60.14030000 14030000 Providing ridges or hips 60 cm over all in
plain with galvanised iron G.I.sheet J or L
hooks. bolts and nuts 8mm dia G.I. Limpet
and bitumen washers copmlete:-
14030100 0.63mm thick sheet . R.mt 111.68 428.37

101 60.14040000 14040000 Providing valleys 90 cm over all in plain G.I.
sheets fixed with galvanised iron J or L
hooks. bolts and nuts 8mm dia G.I. limpet
and bitumen washers complete:-
102 60.14050000 14050000 Providing flushing 38cm. overall in plain
G.I. sheet fixed with galvanised iron. J or L
hooks, bolts and nuts, G.I. limpet and
bitumen washers complete bent to shape
and fixed in walls with cement mortar 1:3
(1 cement.3 sand).
103 60.14060000 14060000 Providing and fixing 15 cm. wide 45 cm.
overall semicircular plain G.I. sheetgutter
with iron brackets 40x3mm size bolts and
nuts and washers etc. including making
necessary conections with rain water pipe
complete as per design.
14060200 0.63mm thick sheet. R.mt 110.35 350.02

104 60.14550000 14550000 Providing and fixing 0.60mm thick
prepainted steel sheet in roofing with hot
dipped metallic zinc coated sheet with top
coat of regular modified polyster (RNP)
organic coating of 20 microns over 5
microns primer coating to back coat of
polyster of 5 microns over 5 microns
primer coating i/c fixing with prepainted
iron J or L hooks, bolts and nuts 6mm dia
metre with prepainted limpet and rubber
washers complete with all accesoriees as
required as per the direction of Engineer-
in-charge.
S.qm 38.18 1233.37
67
Labour Through
Rate Rate
105 60.14560000 14560000 Providing and fixing ridges or hips 60 cm
overall with 0.60mm thick prepainted steel
sheets in roofing with hot dipped metalic
zinc coated sheets with top coat of regular
modified polyster organic coating of 20
microns over 5 microns primer coating +
back microns primer coating i/c fixing with
prepainted iron J or L hooks, bolts & nuts
6mm dia & prepainted G.I. limpet and
bitumen washers complete with all
accessories as required as per the direction
of Engineer in Charges.
R.mt 80.71 451.37
106 60.14570000 14570000 Providing and fixing valley 60 cm overall
0.60mm thick prepainted steel sheet in
roofing with hot dipped metalic zinc
coated sheet with top coat of regular
modified polyster organic coating of 20
microns over 5 microns primer coating
back coat of polyster of 5 microns over 5
microns primer coating i/c fixing with
prepainted iron J or L hooks, bolts and nuts
6mm dia with prepainted G.I. limpet and
bitumen washers complete with all
accessories as required as per the direction
of Engineer-in-charge.
R.mt 118.98 490.39
107 14590000 Providing and fixing on wall face PVC (D-
Plast) rain water pipes of working pressure
not less than 4.5 kg/sqm including filling
the joints with approved adhesive
complete.
60.1459000000 1459010000 75mm dia pipes R.mt 27.49 186.68
60.1459020000 1459020000 100mm dia pipes. R.mt 28.55 227.75
60.1459030000 1459030000 150mm dia pipes. R.mt 28.56 387.76
108 1460000000 Providing and fixing on wall faces PVC (D-
Plast) accessories for rain water pipes
including filling the joints with approved
adhesive complete.
60.146001000 1460010000 PVC Plain bend 75mm dia Each 10.00 110.00
60.14600100 1460010000 PVC Plain bend 110mm dia. Each 15.00 165.00
60.1460010000 1460010000 PVC Plain bend 150mm dia. Each 11.20 340.20
109 60.1461000000 1461000000 Providing and fixing M.S. BP Sheet 1.66mm S.qm 49.89 1280.49
to 20mm thick in eaves
board/facia/soffits/ceiling including
cutting, fixing and welding to steel roof
members and applying a coat of red lead
primer complete as per the instruction of
Engineer-in-charge (Base members of steel
work shall be measured & paid separtely).
68
CHAPTER 14
STEEL WORK
69
CHAPTER 14
STEEL WORK
Notes :–
1 The through rates include the cost on account of water.
2 The through rates include the wastage of steel during
fabrication.
3 The rated for hoisting take into account the element of
labor cost only . The rates are exclusive of the cost of
temporary structures, arrangements for providing counter
weight or launching truss / nose and of hire charges of
machinery etc. If actually required for hoisting wherever
such like items are required, additional rates shall be paid on
the merits of the individual case. For temporary structures,
credit will be afforded for the salvaged materials . The
most economical procedure for hoisting as warranted
according to site condition shall be worked out by the
Engineer-in –Charge.
70
CHAPTER -14
STEEL WORK
Labour Through
Rate Rate
60.1501010000 1501000000 Steel work in single sections including
cutting, hoisting, fixing in position and
110
applying a priming coat of red lead paint.
1501010000 In R.S.Joists,channels angles,tees QtL. 447.52 6053.20

111 60.1504010000 1504000000 Steel work welded in built up sections,
trusses and framed work,including cutting,
hoisting, fixing in position and applying a
priming coat of red lead paint.
1504010000 In beams joists channels , angles,tee, flats QtL. 296.79 9112.19

with connection plates or angle cleats as in
main and cross beems,hip and jack
rafters,purlins connected to common
rafters and the like.
60.1504040000 1504040000 In gratings framed guard bars,ladders, QtL. 2025.00 8699.85
railling, brackets and similar works.
60.1504060000 1504060000 In trusses and trussed purlings in buildings. QtL. 639.80 8152.34
60.1504070000A 1504070000 In Trussed steel bridges .

1504070100 Upto 15 metres span. QtL. 928.53 8436.98
112 60.1506000000 1506000000 Providing and fixing angle iron
door,window,clerestory window frame
manufactured from steel iron section of
40X40X6 mm,thickness including hinges
jamb,lock jamb,beed and if required angle
thrashold ofmild steel angle 50X25 mm
welded or rigidly fixed by mechanical
means,lugs with split end tails to each
jamb including steel but thinges 2.5 mm
thick with provision for locking
arrangement and shock absorber as
specified and applying a coat of approved
steel primer after preteatment of the
surface as directed by Engineer-in- Charge.
R.mt 21.05 232.82

113 1516000000 Providing and fixing steel glazed
doors,windows and ventilators of standerd
rolled steel sections, joints mitred and
welded with 16x3.15 mm lugs 10 cm.long
embedded in cement concrete blocks 15
cmx10cmx10cm size of 1:3:6 (1 cement:3
sand:6 graded stone aggregate 20mm
nominal size) or with wooden plugs and
screws or rawl plug and screws or with
fixing clips or with bolts and nuts as
required and iron fittings,including
providing and fixing of glass panes with
glazing clips and special metal sesh putty
of approved make complete including
applying a priming coat of red lead paint.
71
Labour Through
Rate Rate
60.1516000000 1516010200 Steel doors Single leaf doors. S.qm 179.66 1515.00
60.1516010300 1516010300 Steel doors Double leaf doors. S.qm 179.66 1715.00
60.1516020100 1516020100 Steel windows. Fixed steel windows
S.qm 179.66 1465.00
60.1516020200 1516020200 Steel windows. Side hung windows
S.qm 179.66 1515.00
60.1516030100 1516030100 Steel ventilators. Top hung ventilators.
S.qm 179.66 1715.00
60.1516030200 1516030200 Centre hung ventilator.
S.qm 179.66 1715.00
114 60.1532000000 1532000000 Providing and fixing angle iron door,
window, clerestory window frame
manufactured from M.S.Angle iron
section of 50X50X6 mm, thickness
including hinges jamb, lock jamb, beed
and if required angle thrashold ofmild
steel angle 50X25 mm welded or rigidly
fixed by mechanical means,lugs with
split end tails to each jamb including
steel butt hinges 2.5 mm thick with
with provision for locking arrangement
and shock observer as specified and
applying a coat of approved steel
primer after preteatment of the surface
as directed by Engineer-in-charge.
R.mt 21.00 286.85
115 60.1533000000 1533000000 Providing and fixing angle iron
cupboard frames manufactured from
M.S.Angle iron section 25X25X5mm
thickness including hinges jamb,lock
jamb,beed and if required angle
thrashold of mild steel angle 25X25 mm
welded or rigidly fixed by mechanical
means, lugs with split end tails to each
jamb including steel butt hinges 2.5
mm thick with provision for locking
arrangement and shock observer as
specified and applying a coat of
approved steel primer after
preteatment of the surface as directed
R.mt 20.73 139.38
by Engineerin- Charge.
116 60.1534000000 1534000000 Providing and fixing moulded hand rail
of M.S. hollow pipe 50mm dia welded
in straight lenght over M.S. flat at top
of vertical balusters including one coat
of red oxide priming coat complete
(M.S. flat & balusters of railings shall be
mesaured & paid separetely.
R.mt 41.80 299.63
72
CHAPTER 15
PAINTING AND POLISHING
73
CHAPTER 15
Notes :–
1 The through rates include the cost of materials, wastage,
sand papers and brushes required for completion of any
item. The labor rates include the cost of brushes , sand
papers scaffolding etc. and other appurtenant sundries.
2 The specification-paints, and other goods shall be of Grade–I

notified by the Exeutive Engineers of Rural Development
Department from time to time.
74
CHAPTER -15
Labour Through
Rate Rate
117 16005000 Painting two costs (excluding priming cost)
on new steel and other metal surfaces eith
enamel paint brushin to give an even
shade including cleaning the surface of all
dirt,dust and other foregin matters :--
60.16005000 16005010 Enamel white paint:- S.qm 27.54 51.14

60.16005020 16005020 Enamel paint other than white :-- S.qm 27.93 50.53
118 16007000 Painting one coat (excluding priming coat)
on reviously painted steel and other metal
surfaces with enamel paint brushing to
give an even shade including cleaning the
surface of all dirt,dust and other foreign
matter :--
60.160070000 16007010 With white enamel paint. S.qm 18.66 33.29
60.16007020 16007020 With Enamel paint other than white. S.qm 18.60 32.62
119 16033000 Painting two or more coats on G.I Sheets
with readymix paint of approved brand
and manufecture on new work to give an
even shade.
60.160330000 16033010 Readymixed paint. (Red Shade). S.qm 26.47 42.77
60.16033020 16033020 White /grey/green shade. S.qm 26.62 45.32
120 16034000 Painting one or more coats on G.I Sheets
with readymix paint of approved brand
and manufecture on old work to give an
even shade.
60.160340000 16034010 Readymixed paint. (Red Shade). S.qm 18.48 27.98
60.16034020 16034020 White /grey/green shade. S.qm 18.62 29.50
121 60.16036000 16036000 Applying priming coat over new wood and
wood based surfaces after and including
prepering the surface by thoroughly
cleaning oil,grease,dirt and other foreign
matters sand papering and knotting.
16036040 Readymixed paint brushing primer for S.qm 14.78 28.08

enemel.
122 16040000 Painting two coats(excluding priming coat)
on new wood and wood based surface
with enamel paint to give an even shade
including cleaning the surface of dirt,dust
and other foreign matter,sand papering &
stoping.
60.160400000 16040010 With white enamel paint. S.qm 26.37 50.67
60.16040020 16040020 With enamel paint other than white. S.qm 26.30 49.60
75
Labour Through
Rate Rate
123 16041000 Painting one coat(excluding priming coat)
on previously painted wood and wood
based surfaces with enamel paint to given
and even shade including cleaning of all
dirt,dust and other foreign matter sand
papering and stopping
60.16041000 16041010 With white enamel paint S.qm 17.96 33.29
60.16041020 16041020 With enamel paint other than white S.qm 17.90 32.62
124 16042000 Extra over item No. 16040000 and
16041000 for every subsequent coat of
paint
60.16042000 16042010 With white enamel paint S.qm 15.43 29.76
60.16042020 16042020 With enamel paint other then white S.qm 15.39 29.11
125 60.16053000 16053000 Polishing two coats with french polish on
new wood and wood based surfaces to
give an even surface including cleaning the
surface of all dirt,dust,and sand papered
smooth and including a coat of wood filler.
S.qm 94.25 133.30
126 60.16054000 16054000 Polishing one coat with french polish on
previously polished wood and wood based
surface to give an even surface including
cleaning the surface of all dirt,dust and
sand papered smooth and including a coat
of wood filler. S.qm 47.49 68.59
127 60.16055000 16055000 Extra over items 16053000 and 16054000
for every subsequent coat of polishing.
S.qm 38.24 59.34
128 60.16070000 16070000 Applying priming with cement primer coat
on new concrete /masonry / asbestos
Applying priming with cement primer coat
on new concrete / masonry / asbestos.
16070010 Readymixed primer. S.qm 11.33 22.57

129 60.16077000 16077000 Painting two coats (excluding priming
coat)on new concrete / masonry /
plastered surfaces with enamel paint of
approved brand and manufacture for use
on floors to give an even shade, including
cleaning of all dirt,dust and other foreign
matter and sand papering as required.
S.qm 26.50 59.76
130 60.16078000 16078000 Painting one coat (excluding priming
coat)on previously painted
concrete/masonry / plastered surface with
enamel paint of approved brand and
manufacture for use on floors to give an
even shade including cleaning of all
dirt,dust and other foreign matter and
sand papering as required. S.qm 18.42 38.92
131 60.16079000 16079000 Extra over items 16077000 and 16076000
for every subsequent coat of paint.
S.qm 15.33 35.33
76
Labour Through
Rate Rate
132 60.16103000 16103000 Applying white wall care putty over plaster
surface after thoroughly brushing the
surface free from mortar drops, dust, loose
materials and other foreign matters sand
papered smooth to give final matter finish
to the surface complete.
S.qm 26.70 38.77
133 60.161040000 161040000 Finishing wall with weather proof exterior
grade emulsion of approved design
(Apexultima) or its equarlied on
undecorated wall surfaces (two coats) to
give an even shade and final finish after
throughly cleaning the surface to remove
all dirt, dust and other foreign matter etc
including sand paper smooth complete.
S.qm 25.93 66.86
134 60.161050000 161050000 Wall painting (two coats) with acrylic
emulsion paint of approved brand and
manufacture for interior grade on
undecorated concrete / stone / plastered
wall surfaces to give an even shade
including t horoughly brushing the surface
free from mortar dropping and other
foreign matter and sand papered smooth
including applying of putty a required for
metling the surface.
S.qm 25.22 49.95
77
78
CHAPTER 16
PLASTERING, POINTING, WHITE

WASHING, DISTEMPERING AND OTHER
FINISHES
79
CHAPTER 16
PLASTERING, POINTING, WHITE WASHING , COLOUR

WASHING, DISTEMPERING AND OTHER FINISHES
Notes :–
1 The labour rates include the sundry items like sand papers,
scrappers, soap and soda etc. as also the water charges.
2 The labour rates also include the labor required for thoroughly
mixing the mortar and all sorts of scaffolding and ladders, etc.
3 The paints used shall be specified in HPPWD Specification 1993 of

Grade – I or as declared by the Executive Engineers Rural
Development Department.
80
CHAPTER -16
PLASTERING, POINTING, WHITE WASHING, COLOUR WASHING, DISTEMPRING AND OTHER FINISHES
Labour Through
Rate Rate
135 17044000 6mm Cement plaster to ceiling
60.17044000 17044000 (a) In Cement mortar 1:3(1 Cement:3
Sand) S.qm 41.72 74.51
60.17044020 17044020 (b) In Cement Mortar 1:4(1 Cement:4
Sand) S.qm 41.48 68.10
136 17047000 15mm Cement plaster in single coat on the
rough side of brick/ concrete/stone walls
for interior plastering upto floor two level
including arrises,internal rounded angles,
chamfers and/or rounded angles not
exceeding 80mm in girth and finished even
and smooth.
60.17047020 17047020 Cement Mortar 1:4 (1Cement:4 Sand). S.qm 64.63 128.21
60.17047040 17047040 Cement Mortar 1:6 (1Cement:6 Sand). S.qm 64.09 112.92
137 17048000 15mm cement plaster in single coat on fair

side of brick/concrete / stone walls for
interior plastering upto floor two level
including arrises,internal rounded angles,
chamfers and / or rounded angles not
exceeding 80mm in girth and finished even
and smooth.
60.17048000 17048020 Cement mortar 1:4 (1 cement:4 sand).
S.qm 62.92 123.92
60.17048040 17048040 Cement Mortar 1:6 S.qm 62.41 109.25
138 17049000 20mm Cement plaster in single coat on
rough side of brick/stone masonry for
interior plastering upto floor two level
including arrises,internal rounded
angles,chamfers and/or rounded angles
not exceeding 80mm in girth and finished
even and smooth.
60.17049040 17049040 Cement Mortar 1:6 S.qm 75.61 139.20
139 60.17138000 17138000 White washing with lime on undecorated
wall surfaces two coats to give and even
shade including throughly brooming the
surface to remove all dirt dust mortar dirt
and other foreign matter.
S.qm 5.09 7.79
140 60.17139000 17139000 White washing with lime on decorated
wall surfaces (one coat) to give an even
shade including thoroughly brooming the
surface to remove all dirt,dust,mortar
drops and loose scale of lime wash and
other foreign matter. S.qm 2.49 3.84
141 60.17141000 17141000 Extra over item No. 1713800 for white
washing with lime on ceiling and/or
sloping roofs. S.qm 0.50 -
142 60.17142000 17142000 Extra over item No. 1713900 for white
washing with lime on ceiling and/or
81
Labour Through
Rate Rate
143 60.17143000 17143000 Extra over item No.1714000 for every sub
sequent coat of white washing with lime
ceiling and/or sloping roofs. S.qm 0.30 -
144 60.17164000 17164000 Distempering with dry distemper of
approved brand and manufacture(Two
coats)and of required shade on
undecorated wall surface to given an even
shade over and including primer coat of
whiting after thoroughly brushing the
surface free from mortar droppings and
other foreign matter including preparing
the surface even and sand papered
smooth. S.qm 29.44 38.34
145 60.17165000 17165000 Distempering with dry distemper of
approved brand and manufacture(one
coat) and of required shade on decorated
wall surface to give an even shade after
thoroughly brushing the surface clean of
all grease,dirt,loose pieces of scales
including preparing the surface even and
sand papered smooth. S.qm 7.84 11.16
146 60.17166000 17166000 Extra over item No. 17164000 and
17165000 for every sub sequent coat of
distempering with dry distemper of
approved brand and manufacture. S.qm 5.06 7.76
147 60.17167000 17167000 Extra over item No.17164000 for
distempering with dry distemper on ceiling
and/or sloped roofs. S.qm 3.41 -
148 60.1716800 17168000 Extra over item No 17165000 for
distempering with dry distemper on ceiling
and/or sloped roofs. S.qm 0.80 -
149 60.17169000 17169000 Extra over item no.17166000for every
subsequent coat of distempering with dry
distemper on ceiling and or sloping roofs.
S.qm 0.50 -
150 60.17170000 17170000 Distempering (two coats) with oil bound
washable distemper of approved brand
and manufacture and of required shade on
undecorated wall surfaces to give an even
shade over and including a priming coat
with distemper primer of approved brand
and manufacture after thoroughly
brushing the surface free from mortar
droppings and other foreign matter and
also including preparing the surface even
and sand papered smooth. Priming coat
with distemper primer
S.qm 35.46 54.82
82
Labour Through
Rate Rate
151 60.17172000 17172000 Distempering(one coat) with oil bound
washable distemper of approved brand
and manufature and of required shade,on
decorated wall surfaces to give an even
shade,after thoroughly brushing the
surface clean of all grease, dirt,loose
pieces of scales and also including
preparing the surface even and sand
papered smooth. S.qm 14.95 21.15
152 60.17173000 17173000 Extra over item No 17170000, 17171000
and 17172000 for every sub sequent coat
of distempering with oil bound washable
distemper of approved brand and
manufacture. S.qm 10.28 16.13
153 60.17174000 17174000 Extra over item Nos 17170000 and
17171000 for distempering with oil bound
distemper on ceiling and / or sloping roofs.
S.qm 3.91 -
154 60.17175000 17175000 Extra over item no. 17172000 for
distempering with oil bound distemper on
ceiling and/or sloping proofs. S.qm 1.60 -
155 60.17176000 17176000 Finishing wall with water proofing cement
paint of approved brand and manufacture
and of required shade on undecorated wall
surfaces (two coats) to give an even shade
after thoroughly brushing the surface to
remove all dirt and remains of loose
powdered materials.
S.qm 26.48 39.08
156 60.17177000 17177000 Finishing wall with water proofing cement
paint of approved brand and manufacture
and of required shade on decorated wall
surfaces (one coat) to give an even shade
after thoroughly brushing the surface to
remove all dirt,loose or softened paint.
S.qm 15.28 23.18
157 60.17178000 17178000 Extra over item No. 17176000 and
water proofing cement paint of approved
brand and manufacture. S.qm 9.96 15.26
158 60.17179000 17179000 Extra over item No.17176000 for finishing
with cement paint on ceiling and/or
159 60.17180000 17180000 Extra over item no. 17177000 for finishing
with cement paint on ceiling and / or
slopping roofs. S.qm 1.42 -
83
Labour Through
Rate Rate
160 60.17181000 171801000 Wall painting (two coats) with plastic
manufacture on undecorated wall surfaces
to give an even shade including thoroughly
brushing the surface free from mortar
droppings and other foreign matter and
sand papered smooth including applying of
putty a required for making the surface.
S.qm 25.91 57.06

161 60.171820000 171820000 Wall painting(one coat)with plastic
manufacture on decorated wall surface to
give an even shade including thoroughly
brushing the surface clean of all dirt
grease,loose pieces of scale and sand
papered smooth. S.qm 19.30 38.45
162 60.17183000 17183000 Extra over item No 17181000 and
wall painting with plastic emulsion paint of
approved brand and manufacture.
S.qm 12.58 25.73
163 60.17184000 17184000 Extra over item No 17181000 for painting
with plastic emulsion paint of approved
brand and manufacture on ceiling and/or
164 60.17185000 17185000 Extra over item No 17182000 for painting
with plastic emulsion paint of approved
brand and manufacture on ceiling and/or
84
CHAPTER 17
MISCELLANEOUS WORK
85
CHAPTER 17
MISCELLANEOUS WORK
Notes :–
1 The labour rates include the cost on account of water, scaffolding
and sundries.
2 The through rates include wastage of all the materials involved for
any item.
86
CHAPTER -17
MISCELLANEOUS WORK
Labour Through
Rate Rate
165 60.19020000 19020000 Providing plinth protection 50mm thick in
cement concrete 1:3:6 (1 Cement : 3 Sand :
6 Graded stone aggregated 20mm nominal
size) S.qm 29.28 190.01
166 60.19040000 19040000 Providing under layer for plinth protection
of 75mm thick (unconsolidated) bed dry
brick / stone aggregated 40mm nominal
size will rammed and consolidated and
grouted with fine sand including
preparation of ground.
S.qm 62.77 200.68
167 60.19240000 19240000 Supply and fixing galvanized steel bar-bed
wire (IS:278-1962 Type-I) weighing 9.38 kg
per 100 metres (minimum) straining and
fixing to any type of standard rails,
straining bolts including securing with and
provision of galvanized mild steel wire,
staples or Steel pins etc. as directed (posts 100.00
and struts of wood concrete, steel etc. and Metre
straining bolts shall be paid for seperately). each
line of
wire 1.79 7.29
168 60.07010502 07010502 Extraction / Collection of stone and
stacking at site hard stone by manual
labour. C.um 662.15
87
88
WATER SUPPLY & SANITARY INSTALLATION.
CHAPTER - 18
WATER SUPPLY, PLUMBING AND SANITARY FUTTINGS
89
CHAPTER - 19
WATER SUPPLY, PLUMBING AND SANITARY FUTTINGS
1 The cost of materials covers the cost as at District headquarters with 100 metre carriage
on head load and 1 km. by mechanical transport. All other carriage shall be paid
separately depending upon the location of the site of execution of work. All materials and
fittings shall confirm to the relevant Indian Standards.
2 The labour rates include the cost on account of water but do not include the cost of
materials like cement, sand, span-yarn or lead etc. required for jointing and other works
except where specialised stated.
3 For items of work, like brick works, concrete, RCC etc. reference may be made to the
respective chapter of the Building Schedule-2009 in case where the items to be executed
are not covered by the scheduled items as listed below in this chapter.
90
CHAPTER -18
WATER SUPPLY AND SANITARY INSTALLATION

Labour Through
Rate Rate
169 60.3.2 3.2 Providing and fixing to wall ceiling and
floor galvanised mild steel tubes
(medium grade) tube fitting and clamps
including making good the wall, ceiling
and floor:-
60.3.2.1 (a) 15mm nominal bore R.mt 36.08 182.53
60.3.2.2 (b) 20mm nominal bore R.mt 38.75 208.58
60.3.2.3 (c) 25mm nominal bore R.mt 41.42 240.47
60.3.2.4 (d) 32mm nominal bore R.mt 48.78 329.65
60.3.5 (e) 40mm nominal bore R.mt 61.48 371.72
170 3.5 Providing and laying in trenches,
galvanised mild steel tubes (medium
grade) tube fitings (Earth work in
trenches to be measured and paid for
separately)
60.3.5 (a) 15mm nominal bore R.mt 6.17 135.01
60.3.5.1 (b) 20mm nominal bore R.mt 6.17 155.61
60.3.5.2 (c) 25mm nominal bore R.mt 9.26 184.48
60.3.5.3 (d) 32mm nominal bore R.mt 9.26 256.60
60.3.5.4 (e) 40mm nominal bore R.mt 12.43 285.56
171 60.3.24 3.24 Providing and fixing vtreous china
water closet squatting pan (Indian type
W.C Pan) size 580 mm earth work.bed
concrete. Foot rest and trap to be
measured and paid for separately.
(i) Orrissa pattern : Each 334.18 1094.71

172 60.3.25 3.25 Providing and fixing vitreous china
wash down water closet (European
type W.C. pan) with integral P or S trap
including jointing the trap with soil pipe
in cement mortar 1:1( 1 cement : 1
sand) (seat and cover to be measured
and paid for separately)
(i) Ordinary closet: Each 349.33 2119.72
60.3.25.1 (ii) Vitreous china pattern(Anglo Indian) Each 356.90 2632.21
Universal closet
173 60.3.34 3.34 Providing and fixing plastic seat (solid /
Holow type) and cover for wash down
water closet with C.P. Brass hinges
and rubber buffers.
(i) Solid type:
(a) White plastic seat and cover Each 25.00 437.00
60.3.34.1 (b) Black plastic Seat and cover. Each 25.00 387.00
174 60.3.35 3.35 Providing and fixing vitreous china bowl
pattern urinal including connection the
urinal with waste pipe by means of
white lead mixed with chopped hemp
(waste pipe to be measured and paid
for separately.)
91
Labour Through
Rate Rate
(i) Flat back type of size 430mm x 260mm
x 350mm. Size In white colour
Each 202.95 839.42
60.3.35.1 ii) Angle back type of size 370mm x
430mm x 340mm size in white colour Each 202.95 827.05
squatting plate pattern urinal of size
450mmx350mm with intergal flush pipe.
Each 609.27 1398.87
wash basin with single hole for pillar
tap with C.I. Or M.S brackets painted
white including cutting holes and
making good the same but excluding
fittings :
a Flat back
(I) 630mmx450mm Each 416.33 1619.33
60.3.39.1 (ii) 550mmx400mm Each 412.93 1389.38
177 60.3.46 3.46 Providing and fixing C.P. brass waste
for wash basin or sink :
(a) 32mm dia Each 8.00 99.00
178 60.3.52 3.52 Providing and fixing 600mm x450mm
bevalled edge mirror of superior glass
mounted on 6mm thick A. C. sheet or
ply wood sheet and fixed to wooden
plug with C.P. brass Screw and
washers : Each 180.40 814.53
179 60.3.53 3.53 Providing and fixing C.P Brass towel
rail complete with C.P Brass brackets
fixed to wooden plugs with C.P brass
screws.
(ii) 600mmx20mm size Each 90.20 619.70
180 60.3.54 3.54 Providing and fixing 600mmx120mm
glass shelf with C.P brass brackets and
guard rail complet fixed to wooden
plugs with C.P Brass screws: Each 171.38 897.53
181 60.3.55 3.55 Providing and fixing toilet paper holder
(i) C.P Brass Each 63.14 554.20

182 60.3.57 3.57 Providing and fixing Chromium plated
brass soap dish with C.P. brass
brackets fixed to wooden plug with C.P.
brass screws: Each 63.14 392.20
183 60.3.68 3.68 Providing and fixing C.P brass bib taps
with capstan head weigth 400 gms .
(i) 15mm dia Each 18.00 525.00

60.3.68.1 (ii) C.P Brass pillar tap with capstan head
(a) 15mm dia Each 18.00 669.50

184 60.3.70 3.7 Providing and fixing CP brass angle
valve 15mm nominal size Each 18.00 669.50
185 60.3.71 3.71 Providing and fixing C.P. stop cocks.
(a) 15mm dia Each 18.00 669.50
92
Labour Through
Rate Rate
186 60.3.94 3.94 Providing and fixing P.V.C connection
pipe with bras unions.
(a) 30cm length / 45 cm length
(I) 15mm Nominal size bore Each 5.00 88.00
187 3.104 Providing and fixing brass full way
value with wheel:
60.3.104 (a) 15mm nominal bore. Each 6.00 309.00
60.3.104.1 (b) 20mm nominal bore. Each 15.00 371.00
60.3.104.2 (c) 25 mm nominal bore. Each 15.00 424.00
60.3.104.3 (d) 32 mm nominal bore. Each 20.00 530.00
60.3.104.4 (e) 40 mm nominal bore. Each 25.00 699.60
188 3.109 Providing and fixing G.I./M.I. Union of

following sizes where not included in
the items :
60.3.109 (a) 15mm nominal bore : Each 5.00 66.00
60.3.109.1 (b) 20mm nominal bore : Each 7.50 99.00
60.3.109.2 (c) 25 mm nominal bore. Each 10.00 132.00
60.3.109.3 (d) 32 mm nominal bore. Each 13.00 165.00
60.3.109.4 (e) 40 mm nominal bore. Each 17.00 220.00
189 3.114 Providing and fixing PVC water storage
tank of ISI : 12701 marked,G.I. inlet
and outlet connection, 15mm nominal
bore ball valve and mosquito proof
PVC cover with locking arrangement
including hoisting upto a height of 10
metres above ground level :-
60.3.114 i) 500 litres net capacity tank Each 607.60 4132.60

60.3.114.1 ii) 1000 litres net capacity tank Each 607.23 7647.23
190 60.3.115 3.115 Providing and fixing PVC floor trap of
self cleaning design including fixing
with approved adhesive, cost of cutting
and making good the wall and floors
etc. complete.
i) 110 mm X 75 mm. Each 318.00 482.06
191 3.116 Providing and fixing ISI marked high
pressure PVC spigot and socket,
waste and ventilating pipes including
fixing with approved adhesive etc.
60.3.116 i) complete.
110 mm dia. R.mt 8.24 208.09
60.3.116.1 ii) 75 mm dia. R.mt 8.24 145.08
192 3.117 Providing and fixing PVC single equal
branch with oval access door, insertion
rubber washer 3 mm complete
including fixing with approved
adhesive etc. complete.
60.3.117 i) 110 mm dia. Each 6.00 137.50
60.3.117.1 ii) 75 mm dia. Each 4.00 104.50
193 3.120 Providing and fixing PVC collers
60.3.120 i) 110 mm dia. Each 4.00 44.00
60.3.120.2 ii) 75 mm dia. Each 2.50 27.50
93
Labour Through
Rate Rate
194 3.121 Providing and fixing PVC plain bend
60.3.121 i) 110 mm dia. Each 5.00 71.50
60.3.121.1 ii) 75 mm dia. Each 2.50 38.50
195 3.125 Providing and fixing PVC clamps of
approved design with steel screws and
rawal plugs etc. complete.
60.3.125 i) 110 mm dia. Each 2.00 33.00
60.3.125.1 ii) 75 mm dia. Each 2.00 27.50
196 60.3.130 3.130 Providing and fixing PVC 'P' or 'S' trap
for water closet (squatting pan)
including jointing the trap with the pan
and PVC pipe with approved adhesive
etc. complete.
ii) 110 mm dia. Each 10.00 209.00
197 3.132 Providing and fixing stainless steel
kitchen sink of approved standard ISI
make with drain board and C.P. waste
with C.I. or M.S. brackets painted white
including cutting holes and making
good the same but excluding fitting.
60.3.132 i) Stainless steel kitchen sink 610 x 510

mm with boul depth 200 mm. Each 387.23 3798.27
60.3.132.1 ii) Stainless steel kitchen sink 610 x460
mm with boul depth 200 mm. Each 384.22 3594.67
60.3.125.2 iii) Stainless steel kitchen sink 470 x 420
mm with boul depth178 mm. Each 365.32 2315.32
198 60.3.133 3.133 Providing and fixing PTMT Coloured /
white high density polythelene / poly
propylene 10 litres capacity ( full flush)
European standard control low level
flushing cistern with fittings with a pair
of brackets with fittings such as lead
valve, syphon, 15mm nominal size
PVC ball valve with polythene
float,with push button,couplings for
connections with inlet, outlet and
ovrflow pipe, 40mm dia C.P. flush bend
including cutting holes in walls and
making good the same and connecting
the flush bend with cistern and closet
(overflow) pipe to be measured and
paid for separately . Each 293.79 1230.62
199 60.3.135 3.135 Providing and fixing PTMT waste
coupling of approved quality 32 mm
nominal bore. Each 4.00 55.00
200 60.3.136 1.136 Providing and fixing PTMT urinal
waste coupling of approved quality 32
mm nominal bore. Each 6.00 77.00
201 60.3.140 3.140 Providing and fixing PTMT grating
round of approved quality 100 mm
nominal dia. Each 2.00 33.00
94
ROAD & BRIDGE WORS
CHAPTER - 19
CARRIAGE CRUSHING OF MATERIALS AND SETTING OUT
95
CHAPTER - 19
Preamble:
1 The rate analysis for haulage of materials has been made in terms
of tonne-kilometre (t.km) for ease of adoption depending upon the
lead in km and load in tonnes.
2 The cost of carriage will vary depending upon the riding surface of
the road. Provision has accordingly been made considering
surfaced roads, unsurfaced gravel roads and katcha tracks.
3 Analysis for carriage of materials is exclusive of the loading,
unloading and stacking and this has to be added as applicable.
96
ROAD WORK
CHAPTER - 19
MNGREG Reference to
Labour Through
Sr. No. A Item HPSR Item No. MORD Description of items Unit
Specifications Rate Rate
No.
202 1.10 Haulage excluding Loading & Unloading
Haulage of materials by tipper excluding

cost of loading, unloading and stacking.
Case-I : Surfaced Road Per

Tonne 4.83
Case-II: Unsurfaced Gravel Road Per
Tonne 5.81
Case-III: Katcha Track and Track in River Per
Bed/Nallah Bed and Choe Bed Tonne 11.69
203 1.11 Haulage excluding Loading & Unloading
Haulage of materials by truck excluding

cost of loading, unloading and stacking.
Case-I : Surfaced Road
I) Hume pipe 900/1000/1200 mm dia Per Pipe 53.67
II) Hume pipe 750 mm dia Per Pipe 32.20
III) Hume pipe 600/500/300 mm dia Per Pipe 23.00
Case-II: Unsurfaced Gravel Road

Case-III: Katcha Track and Track in River

Bed/Nallah Bed and Choe Bed
204 1.21.2 Bracking stone by manual labour and

stacking at site
60.07011 i) 63 mm size C.um 280.14 -

60.07011 ii) 50 mm size C.um 326.83 -
60.07011 iii) 40 mm size C.um 373.52 -
60.07011 iv) 25 mm size C.um 466.90 -
97
MNGREG Reference to
Labour Through
No.
60.07011 v) 20 mm size C.um 560.28 -
60.07011 vi) 12 mm size C.um 747.04 -
60.07011 vii) 6 mm size C.um 933.80 -
98
CHAPTER - 20
SITE CLEARANCE
99
CHAPTER - 20
SITE CLEARANCE
Preamble:
1 Unless otherwise stated, the rates include sorting and disposal of unserviceable material and
stacking of serviceable material with all lifts and upto a lead of 1000 m.
2 Where only grass wild growth is met with, rate of item No.2.1, i.e., clearing grass and removal of
rubbish can be applied.
3 Rate analysis for removing of stumps and roots has also been provided separately.
100
CHAPTER - 20
SITE CLEARANCE
MNGREG Reference to
Labour Through
No.
205 60.2.1 2.1 201 Clearing Grass and Removal of
Rubbish
Clearing grass and removal of rubbish
up to a distance of 30 m outside the
periphery of the area as per Technical
Specification Clause 201.
By Manual Means Per 7654.40 -

hectare
206 60.2.2 2.2 201 Clearing and Grubbing Road Land
Clearing and grubbing road land
including uprooting wild vegetation,
grass, bushes, shrubs, saplings and
trees of girth upto 300 mm, removal of
stumps of such trees cut earlier and
disposal of unserviceable materials and
stacking of serviceable material to be
used or auctioned, upto a lead of 1000
m including removal and disposal of top
organic soil not exceeding 150 mm in
thickness as per Technical
By Manual Means Per

60.2.2 In area of non-thorny jungle hectare 29284.09 0.00
60.2.3 In area of thorny jungle Per 39434.10 0.00
hectare
101
102
CHAPTER-21
EARTHWORK, EROSION CONTROL AND DRAINAGE
103
CHAPTER-21
EARTHWORK, EROSION CONTROL AND DRAINAGE
Preamble:
1 The rates have been analysed using Manual means for certain items have also been provided
which can be used for areas inaccessible to machines and also for small jobs.
2 In the rate analyses of earthwork, compacted volume of earth has been considered.
3 In case excavated rock is found suitable for incorporation in works, suitable credit for the available
rock shall be given.
4 For excavation of structures refer to Chapter 11 dealing with items of Foundation.
5 The possibility of using the blasted rock fragments for backfilling behind structures or backfilling of
foundation pits or filling in medians/separators or use in service road shall be examined before
proposing disposal of excavated rock.
6 For inhabited areas, controlled blasting with limited charges of explosives has been provided. This
involves smaller drill holes and additional requirement of electric detonators. Provision has been
made accordingly.
7 Earth excavated from drains can be used in roadway berms. Hence carriage for disposal of same
is not provided.
8 In case of rock fill embankment, it is assumed that material is available at site from rock cutting.
104
CHAPTER -21
EARTH WORK, EROSION CONTROL AND DRAINAGE

MNGREG Reference to
Labour Through
No.
207 3.19 307 Surface Drains in Soil
Construction of unlined surface drains
of average cross-sectional area 0.40
sqm in soil to specified lines, grades,
levels and dimensions. Excavated
material to be used in embankment
with a lift upto 3m and lead of 50 m
(average lead 25 m) as per Technical
60.3.19 (A) Manual Means R.mt. 38.27 -
60.3.19.1 (ii) Surface Drains in Ordinary Rock R.mt. 57.41 -
105
106
CHAPTER-22
GRANULAR SUB-BASES, BASES (NON-BITUMINOUS) AND SHOULDERS
107
Chapter – 22
Preamble:
1 Quantities of materials provided are approximate and are meant for the purpose of estimating
only. Actual quantities shall be as per mix design.
2 For construction of sub-base, two alternatives as under have been provided.
a. Mix in place method
b. Plant mix method
3 While providing for the rate of materials, detailed local enquires should be made and prevailing
market rates ascertained from concerned suppliers in the area keeping in view the location of
crushing plants and lead involved.
4 The quantities considered in the output are the compacted quantities. The quantities of
aggregates provided in the rate analysis under the head material are the uncompacted quantities.
5 The extra Cost of Carriage, including loading, unloading is required to be added for the purpose of
justification.
108
CHAPTER - 22

MNGREG Reference to
Labour Through
No.
208 60.4.7 4.7 405 Water Bound Macadam Sub-base/base
1) WBM Grading 1
Providing, laying, spreading and

compacting stone aggregates of
specific sizes to water bound macadam
specification including spreading in
uniform thickness, hand packing, rolling
with three wheel 80-100 kN static roller
in stages to proper grade and camber,
applying and brooming, stone
screening / binding materials to fill-up
the interstices of coarse aggregate,
watering and compacting to the
required density Grading 1 as per
Technical Specification Clause 404.
(A) By Manual Means. C.um 2,173.68

60.4.7.1 2) WBM Grading 2
with smooth wheel roller 80-100 kN in
stages to proper grade and camber,
screening/ binding materials to fill-up
the interstices of coarse aggregate,
watering and compacting to the
required density grading 2 as per
(A) By Manual Means. C.um 2,240.20

60.4.7.3 3) WBM Grading 3
with smooth wheel roller 80-100 kN in
stages to proper grade and camber,
screening to fill-up the interstices of
coarse aggregate, watering and
compacting to the required density
Grading 3 as per Technical
Specification Clause 405. C.um 2,242.10
209 60.4.18 4.18 412 Brick Soling
109
Laying brick soling layer on prepared S.qm 418.69
sub-grade with brick on end edging
according to lines, graded and cross-
section shown on the drawing filling
joints with sand and earth, spreading
25 mm thick layer of earth over brick
soling, watering and rolliing the same
with three wheel road roller 80-100 kN
as per Technical Specification Clause
412
110
CHAPTER-23
CEMENT CONCRETE PAVEMENT
111
CHAPTER-23
Preamble:
1 Use of cement concrete pavement for rural roads is likely to be limited to small stretches. These
will, therefore, have to be constructed without use of heavy equipment, like, high capacity
batching/mixing plant and slip form pavers. Accordingly, the rate analysis is based on concrete
mixer of suitable capacity with weigh batcher, fixed side forms and screed, plate and needle
vibrators.
2 The rates of materials taken in the analysis/schedule are on lowest prevailing market rate has
finalized and approved by the committee constituted. The concrete mixer placement is also
assured close to the site of work so that transporting and placement of concrete can be done by
labour alone.
3 Quantities of materials provided in the rate analysis are for the estimate purpose. Exact quantity of
materials will be determined from the job mix formula.
4 The extra Cost of Carriage, including loading, unloading is required to be added based on Tonne -
Kilometerage as per Chapter -I for the purpose of justification.
112
CHAPTER - 23

MNGREG Reference to
Labour Through
No.
210 60.6.6 6.6 1500 Rectangular Concrete Block Pavement
Manufacturing, laying of cement S.qm 88.96 569.19

concrete blocks of size 0.450 m x 0.300
m x 0.15 m of Cement Concrete (C.C.)
M30 garde and spreading 25 mm thick
sand under neath and filling joints with
sand on existing W.B.M. base as per
211 60.6.7 6.7 1500 Interlocking Concrete Block Pavement
(1) Providing and Laying of Interlocking S.qm 24.21 735.02

Concrete Block Pavements having
thickness 80 mm as per drawings and
60.6.7.1 (2) Providing and Laying of Interlocking S.qm 21.31 653.18

Concrete Blcok Pavements having
thickness 60 mm as per drawing and
Technical Specification Clause 1504
113
114
CHAPTER-24
HILL ROADS
115
CHAPTER-24
HILL ROADS
Preamble:
1 The Chapter covers only the analysis of rates for items which are peculiar to hill roads. For other
items, reference may be made to relevant Chapters and analysis modified as suggested in note 2
below.
2 Extra Provision for High Altitude Areas
Considering the loss of output of men and machines above 2100 m altitude, the following
percentage addition to cost of manpower and usage rates of machines may be considered in the
analysis of rates given in various Chapters.
% of the value in
% of the value in
Altitude in m Machine
Manpower
to be added to rates
2100 to 2400 0.07 0.03
2401 to 2700 0.15 0.06
2701 to 3000 0.25 0.09
3001 to 3300 0.32 0.12
3301 to 3600 0.48 0.15
3601 to 3900 0.66 0.18
3901 to 4200 0.86 0.21
4201 to 4500 1.08 0.24
4501 to 4800 1.32 0.27
4801 to 5100 1.86 0.3
The above provisions are based on the report of Defence Institute of Physiology and Allied
Sciences, Delhi Cantt. regarding quantitative reduction in the physical work capacity of individuals
working in high altitude areas and the recommendation of the Committee on Cost of Construction
set-up by Border Roads Development Board for reduction in output of machines while working in
high altitudes. These figures are adopted from ‘Standard Schedule of Rates’ of BRO as applicable
to high altitude areas.
3 The above addition is also to be applied on the analysis of rates for items provided in this Chapter.
4 The extra Cost of Carriage, including loading, unloading is required to be added based for the
purpose of justification.
116
CHAPTER -24
HILL ROADS
MNGREG Reference to
Labour Through
No.
212 60.8.3 8.3 1600 & 300 Earthwork in Hill Road
(i) Excavation in Hilly Areas in Soil by
manual means.
A) Excavation in soil in Hilly Area by
manual means including cutting and
trimming of side slopes and disposing
of excavated earth with a lift upto 1.5 m
and a lead upto 20 m as per drawing
and Technical Specification Clause
1603.1 C.um 95.68 -
60.8.3.1 B) Extra for Every Additional Lift of 1.5 m
or Part thereof C.um 10.12 -
(iii) Excavation in Hilly Area in Ordinary
Rock by manual means
60.8.3.2 A) Excavation in ordinary rock using C.um 210.50 -
manual means including loading in a
truck and carrying of excavated
material to embankment site with a lift
upto 1.5 m and lead upto 20 m as per
Clause 1603.2.
60.8.3.3 B) Extra for Every Additional Lift of 1.5 m C.um 15.82 -
or Part thereof
213 60.8.12 8.12 Preparation of sub grade by dressing to
combor (Earth work for the cutting
involved for sub-grade to be paid for
separately depending upon the
classification of soil completed as per
HP.PWD specifications. Sqm 0.59 0.61
214 60.814 8.14 Stone soling properly hand-packed
filling interstices with spalls and
consolidating with power road roller to
the requeired gradient and camber
including spreading watering and rolling
of binding materials moorum or earth
etc. complete as per HP.PWD
specification. 100 mm spread thickness
(finished work including materials and
labour) C.um 80.66 902.19
215 60.8.16 8.16 Providing dry stone Kharanja drain 45
cm wide complete with 25 cm side
stone complete as per HP.PWD
specification R.mt 12.82 122.36
cm wide including 25 cm side stone laid
in cement morrte 1:6 (1 cement: 6
sand) complete as per HP.PWD
cm wide including 25 cm side stone laid
in cement morrte 1:6 (1 cement: 6
sand) complete as per HP.PWD
117
118
CHAPTER-25
PIPE CULVERTS
119
CHAPTER-25
PIPE CULVERTS
Preamble:
1 Pipe culverts of sizes 600, 900 mm dia in single row which are generally used on roads, have been
included. Providing and laying of pipe has been included in the rate analysis. Items of auxiliary
works such as excavation, bedding, backfilling, concrete and masonry shall be analysed, as
provided under the respective sections and paid for separately.
2 Analysis has been given separately for NP2 pipes for ease of adoption.
3 Cost of any river training and protection work like stone pitching, apron, curtain wall etc. may be
analysed under the respective item included in Chapter 14.
4 The joining of pipes is proposed by collar joints.
5 The thickness of first class bedding has been taken as 150 mm. The height of bedding has been
taken as 1/10th of overall height of pipe in the analysis. This may be modified as per thickness
indicated in the approved drawing.
6 The extra Cost of Carriage, including loading, unloading is required to be added based on Tonne -
Kilometerage as per Chapter -I for the purpose of justification.
120
CHAPTER - 25
PIPE CULVERTS
MNGREG Reference to
Labour Through
No.
218 60.9.3 9.3 11100 Providing and laying reinforced
cement concrete pipe NP2 as per
design in single Row.
Providing and laying reinforced cement
concrete pipe NP2 for culverts on first
class bedding of granular material in
single row including fixing collar with
cement mortar 1:2 but excluding
excavation, protection work, back
filling, concrete and masonary work in
head walls and parapets clause 1108.
60.9.3 A 900mm dia Metre 50.20 3,098.52

60.9.3.1 B 600mm dia Metre 30.07 1,461.46
121
122
CHAPTER-26
FOUNDATION
123
CHAPTER-26
FOUNDATION
Preamble:
1 Excavation for structures has been provided by and large by manual means.
2 The earth excavated from foundation has been proposed to be backfilled in the foundation
trenches except for marshy soil where disposal has been provided.
3 The rock surface for foundations is to be prepared which has been analysed accordingly.
4 In case of rock, excavation has been considered upto a depth of 1500 mm for rock of ultimate
crushing strength of 10 Mpa or more, which shall be reckoned as hard rock.
5 Mixing of cement concrete has been considered by using concrete mixer with weigh batching
facility fitted with water measuring device. It is preferable to use concrete mixes fitted with load
cells for weigh batching.
6 In remote areas, for isolated slab culvert/box culvert upto 2 m span, concrete can be hand mixed
in accordance with Clause 806 of MORD Specifications. Therefore, in the analysis, for items of
concrete, the alternative of hand mixing has also been considered.
7 Steel reinforcement for cement concrete work is required to be provided separately. The rate for
the same has been analysed using HYSD and TMT bars.
8 Necessary safety precautions shall be taken for excavation for open foundation for which
guidance may be taken from IS:3764. Cost of shoring and shuttering has been provided on
percentage basis, which may be adjusted according to site condition.
9 For brick masonry work, clay fly ash bricks of approved type can be used in accordance with
Section 600 of MORD Specifications and rate may be adopted accordingly.
10 Rates of all materials used in the analysis/schedule are on lowest prevailing market rates as
finalized and approved by the committee constituted and should include cartage from crusher.
124
CHAPTER - 26
FOUNDATION
MNGREG Reference to
Labour Through
No.
219 60.11.1 11.1 300 Excavation for Structures

Earthwork in excavation for structures
as per drawing and technical
specifications Clause 305.1 including
setting out, construction of shoring and
bracing, removal of stumps and other
deleterious material and disposal upto
a lead of 50 m, dressing of sides and
bottom and backfilling in trenches with
excavated suitable material.
I. Ordinary soil
60.11.1 (i) Upto 3 m depth Cum 153.09
60.11.1.1 (ii) 3 m to 6 m depth Cum 181.79
60.11.1.2 II. Ordinary rock (not requiring blasting)
Upto 3 m depth Cum 191.36
220 11.4 800 & 1200 Providing concrete for plain / reinforced
concrete in open foundations complete
as per drawings and technical
specifications Clause 802, 803, 1202 &
1203
I. P.C.C grade M 10
60.11.4 (i) Nominal mix 1:3:6 Cum 414.88 3,981.54
60.11.4.1 (ii) Nominal mix 1:3.6 (Hand mixing) Cum 487.59 3,908.66
II. P.C.C grade M 15
60.11.4.2 (i) Nominal mix (1:2.5:5) Cum 414.88 3,961.40
60.11.4.3 (ii) Nominal mix 1:2.5:5 (Hand mixing) Cum 487.59 3,888.52
III. P.C.C. grade M 20
60.11.4.4 (i) Nominal mix (1:2:4) Cum 414.88 4,463.32
60.11.4.5 (ii) Nominal mix 1:2:4 (Hand mixed) Cum 487.59 4,390.43
60.11.4.7 V. R.C.C. grade M 25 1:1/1/2:3 Cum 440.15 5,076.02
60.11.4.8 vi PCC grade M-15(1:2.5:5) Cum 414.88 3,536.33
221 11.6 700 & 1200 Stone masonry work in cement mortar
in foundation complete as per drawing
and technical specifications Clauses
702, 704, 1202 & 1203.
I. Coursed rubble masonry (1st sort)
60.11.6.1A (ii) In 1:4 cement mortar Cum 1,008.37 3,832.21
60.11.6.2A (iv) In 1:6 Cement mortar Cum 1,008.38 3,574.81
II. Coursed rubble masonry (2nd sort)
60.11.6.4A (iv) In 1:4 Cement mortar Cum 927.03 3,560.76
60.11.6.7A (iv) In 1:6 Cement mortar Cum 927.03 3,570.82
222 60.11.8 11.8 1000 & Supplying, fitting and placingTMT bar Tonne 1,869.60 60,117.60
1200 reinforcement in foundation complete
as per drawings and technical
specifications Clauses 1000 and 1202
223 60.11.10 11.10 800 & 1200 Providing and Laying concrete for Cum 414.88 3,311.55
plain/reinforced concrete in open
foundations complete as per drawing
and technical specification clauses 802,
803, 1202 and 1203
125
MNGREG Reference to
Labour Through
No.
224 60.11.12 11.12 800 & 1200 Providing and Laying concrete for Cum 414.88 3,036.99
803, 1202 and 1203
225 11.13 11.13 800 & 1200 Providing and Laying concrete for Cum 414.88 2,899.71
803, 1202 and 1203
126
CHAPTER-27
SUBSTRUCTURE
127
CHAPTER-27
SUBSTRUCTURE
Preamble:
1 The cost of formwork will vary with the height and cross-section of the substructure. Provision has
been made accordingly.
2 As the higher grade of concrete is costlier, the provision made for formwork on percentage basis
has been suitably adjusted to make it compatible with other grades.
3 Filter media and backfilling behind abutment are required to be provided as per guidelines in
IRC:78- 2000.
4 Bearing shall be set truly level so as to have full and even seating.
5 The bearing should be procured only from those manufacturers who have been pre-qualified by
MORTH.
6 For spans in gradient, the soffit shall be made horizontal specially at the supports and the bearing,
where provided, shall be placed horizontally.
7 Weep holes shall be provided as per specifications.
8 For elastomeric bearings, the concrete surface shall be leveled such that the variation is not more
than 1.5 mm from a straight edge placed in any direction across the area.
128
CHAPTER - 27
SUBSTRUCTURE
MNGREG Reference to
Labour Through
No.
226 60.12.3 12.4 600 Plastering with cement mortar (1:4), 15 S.qm 43.42 132.15
mm thick on brickwork in substructure
as per technical specification Clauses
613.4 & 1204
227 60.12.6A 12.6 700 Construction of dry rabble masonry for C.um 822.36 2,212.56
retaining walls, breast walls, revetment
walls and parapets etc. for sub
structure and super structure complete
as per drawing and technical
specification clauses 704.6 and 1302.5
228 12.7 700 Stone masonry in cement mortar for

substructure complete as per drawing
& technical specification Clauses 702,
704, 1202 and 1204
I. Coursed rubble masonry (1st sort)
60.12.7.1A (ii) In 1:4 cement mortar C.um 1,058.79 4,023.82
60.12.7.2A (iv) In cement morter 1:6 C.um 1,058.79 3,753.55
II. Coursed Rubble masonry (2nd sort)
60.12.7.4A (ii) In 1:4 cement mortar C.um 973.37 3,738.80
60.12.7.5A (iv) In cement morter 1:6 C.um 942.43 3,441.50
III. Random rubble masonry
60.12.7.6A (i) In cement mortar (1:3) C.um 894.54 3,862.97
60.12.7.7A (ii) In 1:4 cement mortar C.um 894.54 3,565.68
60.12.7.8A (iv) In cement morter 1:6 C.um 894.54 3,268.38
229 12.8 800 Plain/reinforced cement concrete in sub

structure as per drawings and technical
specification clauses 802, 804, 805,
806, 807, 1202 and 1204
I P.C.C. grade M 15 (1) upto 5 metre height
60.12.8 (i) Nominal mix (1:2.5:5) C.um 438.81 4,189.94
60.12.8.1 (II) Nominal mix 1:2.5:5 (Hand mixing) upto C.um 515.72 4,112.86
5m height
60.12.8.2 III P.C.C. grade M 20
(i) Nominal mix (1:2:4) for height upto 5m C.um 438.81 4,566.82
230 60.12.13 12.13 600 Providing weapholes in brick masonry / Each 7.68 214.92
stone masonry /plain reinforced
concrete abutment, wing wall, return
wall with 100 mm dia PVC pipe
extending through the full with of the
structures with slop of 1(v):20(H)
towards drawing face complete as per
drawing and technical specification
clauses 614, 709, 1204.3.7
231 60.12.14 12.14 1200 Backfilling behind abutment, wing wall C.um 196.51 647.71
and return wall complete as per
drawings & technical specification
Clause 1204.3.8
129
MNGREG Reference to
Labour Through
No.
232 60.12.15 12.15 1200 Providing and laying filter media with C.um 200.56 1,101.76
granular crushed aggregates as per
specification to a thickness of not less
than 600 mm with smaller size towards
the soil and bigger size towards the
wall and providing over the entire
surface behind abutment, wing wall,
return wall to the full height, compacted
to firm condition complete as per
drawing and technical specification
Clause 1204.3.8
130
CHAPTER-28
SUPERSTRUCTURE
131
CHAPTER-28
SUPERSTRUCTURE
Preamble:
1 The rate analysis has been done for the following types of railings & parapet:
i. M.S. railing
justification.
132
CHAPTER - 28
SUPERSTRUCTURE
MNGREG Reference to
Labour Through
No.
233 60.13.1 13.1 800 Providing and laying reinforced cement
concrete in superstructure as per
drawing and technical specifications
Clauses 800, 1205.4 and 1205.5
I. R.C.C grade M 20
60.13.1 (i) I For nominal mix 1:2:4 upto 5 m height C.um 509.09 5,429.27
(i) II For nominal mix 1:2:4
60.13.2 Height from 5m to 10m C.um 530.30 5,459.13
60.13.3 (ii) I For nominal mix 1:2:4 (Hand mixed) up C.um 562.61 5,291.76
to 5 m height
60.13.4 Height from 5m to 10m C.um 586.05 5,319.66
60.13.5 III. (i) R.C.C. Grade M 30 upto 5 m height C.um 509.09 6,043.16
60.13.6 III. (ii) R.C.C. Grade M 30 (5 to 10m height) C.um 530.30 6,076.76
234 60.13.7 13.3 1000 Supplying, fitting, and placing TMT bar Tonne 2,353.96 60,767.96
reinforcement in superstructure
complete as per drawing and technical
specifications Clauses 1002, 1010 and
1202
235 60.13.8 13.7 1200 Providing fitting and fixing mild steel R.mt 182.55 2,607.06
railing complete as per drawing and
technical specifications Clause 1208.2
236 60.13.34 13.34 1200 Providing steel R.S.Js/built-up steel

sections including cutting, welding /
rivetting, hoisting, fixing in position for
composite girders with shear
connectors complete with painting as
per drawing and technical
specifications Clause 1205.6
A) Steel section Qtis. 535.31 6,296.49
133
MNGREG Reference to
Labour Through
No.
134
CHAPTER-29
PROTECTION WORKS
135
Chapter –29
PROTECTION WORKS
Preamble:
1 Three types of aprons as under have been catered for:
a. Boulder apron laid dry
b. Boulder apron laid in wire crates
c. Apron laid in cement concrete blocks of M 15 grade
2 A toe wall for toe protection of pitching can be either in random rubble masonry or in nominal mix
cement concrete M 10, or in brick masonry. Depending upon the design, the rates may be
adopted.
3 Flooring has been proposed in dry rubble stone, rubble stone laid in cement mortar 1:3, cement
concrete blocks M 15 and brick on edge laid in cement mortar (CM) 1:3.
justification.
136
CHAPTER - 29
PROTECTION WORKS
MNGREG Reference to
Labour Through
No.
237 60.14.1 14.1 1300 Providing and laying boulder apron for C.um 266.46 1,185.66
bed protection with stone boulders of
minimum size and weight as per Table
1300.1, no fragment weighing less
than 25 kg laid dry complete as per
drawing and technical specifications
Clause 1301
238 60.14.2A 14.2 1300 Providing and laying of boulder apron C.um 167.05 1,791.67
laid in wire crates with 4 mm dia GI wire
conforming to IS:280 and IS:4826 in
100 mm x 100 mm mesh (woven
diagonally) including 10 per cent extra
for laps and joints laid with stone
boulders weighing not less than 25 kg
each as per drawing and technical
specifications Clause 1301
239 60.14.7 14.7 1300 Providing and laying flooring laid over
cement concrete bedding complete as
per drawing and technical specification
Clause 1303
I. Rubble stone laid in cement mortar 1:3 C.um 947.34 3,358.44
240 60.14.8 14.8 1303 Providing and laying of dry rubble C.um 467.40 1,795.98
flooring complete as per drawings and
technical specifications Clause 1303.3
137

Schedule of Rate MG NREGA 2020

Uploaded by

Copyright:

Available Formats

Schedule of Rate MG NREGA 2020

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Schedule of Rate MG NREGA 2020

Uploaded by

Copyright:

Available Formats

INDEX

Chapter No. Name of Sub-head Page NO.

CODE DESCRIPTION UNIT RATE

1 Beldar / coolie Each 184.00

Bhisti Each 184.00

2 Blaster Each 267.00

3 Mate Each 184.00

3 Mason 2nd class Each 267.00

4 Mason 1st class Each 346.00

5 Black smith 2nd class Each 267.00

4 Black smith 1st class Each 346.00

6 Carpenter 2nd class Each 267.00

7 Carpenter 1st class Each 346.00

8 Fitter Each 267.00

9 Painter 1st Class Each 267.00

MATERIAL FOR BUILDING WORKS

28 In scants. Cum 0.00

31 Boards: Partical Board. 12mm thick Sq M 400.00

10mm thick anti skid water proof stain and impact

45 Medium shade pigment Kg 150.00

46 Red sand stone 40mm thick Sqm 500.00

47 Kota stone slabs: 25mm thick Sqm 550.00

48 Garsa (Kullu) Stone slab 12.5mm thick Sqm 575.00

49 20 mm thick White makrana marble. Sqm 800.00

50 PVC antistatic vinyl flooring plain or coloured 2mm thick. Sq M 600.00

51 Adhesive for PVC Flooring Litre 350.00

52 PVC / rubber tile Flooring 2 mm thick Sq M 550.00

53 White glazed tiles Sq M 275.00

54 Glass panes of sizes: Plain glass: 3mm thick. Sq M 350.00

55 Iron hinges 125x65x2.12mm 10 Nos 195.00

56 Iron Hinges 100x58x1.90mm 10 Nos 130.00

57 Iron hinges 50x37x1.50 mm 10 Nos 60.00

58 Nickel plated bright finished piano hinges Mtr 75.00

59 Screws 50 mm 100 Nos 125.00

60 Screws 40 mm 100 Nos 65.00

61 Screws 25 mm 100 Nos 60.00

62 Screws 20 mm 100 Nos 50.00

63 CGI / PGI Sheet 0.63 mm thick Qtls 6500.00

64 G.I.seam bolts and nuts . 10 Nos 75.00

65 J or L hooks 10 Nos 100.00

66 Limpet washer 100 Nos 60.00

67 Bitumen washers 100 Nos 40.00

68 Prepainted Sheet 0.60 mm thick. Sq M 850.00

69 Prepainted sheet 60cm overall Rmt 330.00

70 Iron bolts and nuts 10 nos 80.00

71 GI/Plain washer 100 Nos 100.00

71 Bitumen washer Each 50.00

74 110 mm dia. Mtr. 190.00

75 150 mm dia Mtr. 350.00

76 75 mm dia each 100.00

77 110 mm dia. each 150.00

78 150 mm dia each 315.00

79 75 mm dia each 80.00

80 110 mm dia. each 105.00

81 150 mm dia each 245.00

PVC plain shoe each

82 75 mm dia each 100.00

96 Oxidized M.S. sliding door bolts 300x16mm. Each 160.00

97 Oxidized M.S. sliding door bolts 250x16 mm Each 150.00