SDS Constellium – Aluminium Metal Alloys

MATERIAL SAFETY DATA SHEET 13/01/2020

Al Alloy

Revised edition n° 4
Aluminium Metal Alloys
Previous version 12/07/2018

SECTION 1 Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Aluminium metal alloy
Identification of the product Solid.
Product code Article code: reference to materials standards (Aluminium metal alloy
1XXX, 2XXX, 3XXX, 4XXX, 5XXX, 6XXX, 7XXX, 8XXX, remelt alloys)
Not Applicable for alloys containing > 1% Ni, > 1% Li or > 0.1% Pb
Trade name Aluminium ingots, aluminium billets, aluminium slabs, coils, extruded products...

1.2. Relevant identified uses of the substance or mixture and uses advised against
Industrial use: Uses of substances as such or in preparations at industrial sites
Metal processing and fabrication

1.3. Details of the supplier of the safety data sheet

This generic Safety Data Sheet has been provided for information purposes only, since according to present
legislation the producer is under no obligation to provide any Safety Data Sheet for this material.
Company identification Constellium International
Washington Plaza,
40-44 rue Washington,
75008 Paris
https://www.constellium.com/contact

1.4. Emergency telephone number

Emergency phone nr Call national emergency number or 112 for Europe or 911 for North America

SECTION 2 Hazards identification

2.1. Classification of the substance or mixture

Hazard Class and Category Code Regulation EC 1272/2008 (CLP)

Not regulated.

2.2. Label elements

Labeling Regulation EC 1272/2008 (CLP)

Not regulated

• Precautionary statements
Does not pose any health hazard under normal conditions of use and as delivered
Fines particles from processing (grinding, cutting, polishing and welding) may be readily ignitable or create an
explosive atmosphere, and needs to be controlled
Fine particles in contact with water or humidity in air may release flammable gases in hazardous quantities, and may
in some cases set off thermal reactions in contact with iron oxide and certain other metal oxides.
For liquid aluminium there is a risk of explosions if in contact with water, and reacts violently in contact with rust,
oxides of some other metals or nitrate.

Version 2020-01-13 Page 1 of 6

 SDS Constellium – Aluminium Metal Alloys

SECTION 3 Composition/information on ingredients

Substance / Preparation : Preparation.

Composition : This product is not hazardous but contains hazardous components.

Aluminium with Al content of > 75 weight by weight %

Substance name Contents CAS No EC No Annex No Classification

Aluminium : >= 75 % 7429-90-5 231-072-3 ----- ----- Not classified

Reach Registration Number:
Constellium Issoire (Only Representative Constellium Rolled Products Ravenswood, LLC): 01-2119529243-45-xxxx
Constellium Neuf Brisach: 01-2119529243-45-xxxx
Constellium Singen: 01-2119529243-45-xxxx
Silicon : <= 15 % 7440-21-3 231-130-8 ----- ----- Not classified
Zinc : <= 12 % 7440-66-6 231-175-3 ----- ----- Not classified
Reach Registration Number:
Constellium Issoire (Only Representative Constellium Rolled Products Ravenswood, LLC): 01-2119467174-37-xxxx
Constellium Neuf Brisach: 01-2119467174-37-xxxx
Copper : <= 10 % 7440-50-8 231-159-6 ----- ----- Not classified
Reach Registration Number:
Constellium Issoire (Only Representative Constellium Rolled Products Ravenswood, LLC): 01-2119480154-42-xxxx

Magnesium : <= 5 % 7439-95-4 231-104-6 ----- ----- Not classified

Reach Registration Number:
Constellium Issoire (Only Representative Constellium Rolled Products Ravenswood, LLC): 01-2119537203-49-xxxx
Constellium Neuf Brisach: 01-2119537203-49-xxxx
Constellium Singen: 01-2119537203-49-xxxx
Iron : <= 3 % 7439-89-6 231-096-4 ----- ----- Not classified
Manganese : <= 2 % 7439-96-5 231-105-1 ----- ----- Not classified
Reach Registration Number:
Constellium Issoire (Only Representative Constellium Rolled Products Ravenswood, LLC): 01-2119449803-34-xxxx
Nickel : <1% 7440-02-0 231-111-4 028-002-00-7 ----- H351, H317, H372
Lithium : <1% 7439-93-2 231-102-5 003-001-00-4 ----- H260, H314
Silver : <= 0.7 % 7440-22-4 231-131-3 ----- ----- Not classified
Titanium : <= 0.5 % 7440-32-6 231-142-3 ----- ----- Not classified
Reach Registration Number:
Constellium Issoire (Only Representative Constellium Rolled Products Ravenswood, LLC): 01-2119484878-14-xxxx
Chromium : <= 0.5 % 7440-47-3 231-157-5 ----- ----- Not classified
Zirconium : <= 0.5 % 7440-67-7 231-176-9 ----- ----- Not classified
Reach Registration Number:
Constellium Issoire (Only Representative Constellium Rolled Products Ravenswood, LLC): 01-2119490102-49-xxxx
Vanadium : <= 0.5 % 7440-62-2 231-171-1 ----- ----- Not classified
Bismuth : <= 0.5 % 7440-69-9 231-177-4 ----- ----- Not classified
Strontium : <= 0.5 % 7440-24-6 231-133-4 ----- ----- Not classified
Lead : < =0.1% % 7439-92-1 231-100-4 ----- ----- H360, H362, H372

SECTION 4 First aid measures

4.1. Description of first aid measures

- Inhalation In case of dust generation during some work operations and inhalation remove to
ventilated area and keep calm. In case of ongoing discomfort consult a physician
- Skin contact In case of burns from hot/liquid metal, rinse with plenty of water and contact
physician. In case of liquid metal splashes, remove affected clothing
- Eye contact If particles comes into contact with eyes treatment for mechanical irritation or
injury may be required; in case of ongoing discomfort consult a physician
- Ingestion Not applicable here

4.2. Most important symptoms and effects, both acute and delayed
None known.

4.3. Indication of any immediate medical attention and special treatment needed
Get medical advice.

SECTION 5 Firefighting measures

5.1. Extinguishing media

This product does not present fire or explosion hazards as shipped. Small chips, dust and fines may be ignitable.
Avoid sparks and prevent electrostatic charges from accumulating.
- Suitable extinguishing media Use class D extinguishing agents on dust, fines or molten metal

Version 2020-01-13 Page 2 of 6

 SDS Constellium – Aluminium Metal Alloys

- Unsuitable extinguishing media Water, foam, halogenated extinguishing agents. Do not use water with liquid
aluminium.

5.2. Special hazards arising from the substance or mixture

Specific hazards None known.
Reaction with water Fine particles in contact with water may generate flammable gases, dust
explosions may also occur.

5.3. Advice for firefighters

Special protective equipment for fire fighters Fire fighters should wear approved, positive pressure, self-
contained breathing apparatus and full heat protective clothing
when appropriate
Specific methods The product as such is not flammable. Use firefighting extinguishing methods suitable
to surrounding conditions
Fine dispersed aluminium (dust, powder) may form explosive mixtures in contact with
air. In case of fine particles in contact with water, flammable gases in hazardous
quantities may be released.
Molten aluminium may explode on contact with water or moisture, and may react
violently with rust, certain metal oxides and nitrates.

SECTION 6 Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

See protection measures listed in section 8.

6.2. Environmental precautions

Collect scrap for recycling

6.3. Methods and material for containment and cleaning up

Clean-up methods Pick up mechanically. In liquid form let solidify and cool down to ambient air
temperature.

6.4. Reference to other sections

See section 13

SECTION 7 Handling and storage

7.1. Precautions for safe handling

General Ensure good ventilation / local exhaust at the workplace in the case of operations
generating dust, like cutting, grinding, polishing
Fine dispersed aluminium (dust, powder) may form explosive mixtures in contact
with air and in contact with water may release highly flammable gases in
hazardous quantities. Remelt ingots needs to be kept dry and preheated before
charging into liquid metal

7.2. Conditions for safe storage, including any incompatibilities

Storage Product should be kept dry. Pay attention to stack stability

SECTION 8 Exposure controls/personal protection

8.1. Exposure limits

CAS# EC# Component Total part mg/m3 Respirable part mg/m3 Comments

7429-90-5 231-072-3 Aluminium 10 4 Nuisance dust

7440-21-3 231-130-8 Silicon 10 3 Nuisance dust
7439-89-6 213-096-4 Iron 10 4 Nuisance dust
7439-95-4 231-104-6 Magnesium 10 4 Nuisance dust
7440-50-8 231-159-6 Copper 1.0 0.1 Several EU MS
7440-66-6 231-158-0 Zinc 5 Zinc oxide fume
7439-96-5 231-105-1 Manganese 0,2 0,02 Inhalable Germany
7440-32-6 231-142-3 Titanium 10 4 Nuisance dust

Version 2020-01-13 Page 3 of 6

 SDS Constellium – Aluminium Metal Alloys

7440-47-3 231-157-5 Chromium 2 EU

7440-02-0 231-111-4 Nickel 0.05 Norway, Denmark
0,5 Austria, UK
1 Finland, France,
Belgium, Italy
7439-93-2 231-102-5 Lithium None
7440-69-9 231-177-4 Bismuth 5 Nuisance dust
7440-22-4 231-131-3 Silver 0.1 EU
7440-67-7 231-176-9 Zirconium 1.0 Resp Germany
7440-24-6 231-133-4 Strontium 5 Nuisance dust
7440-62-2 231-171-1 Vanadium 0.05 Inhalable France
7439-92-1 231-100-4 Lead 0,15 EU
0,1 Austria, Finland,
France, Germany,
Sweden,
Switzerland
0,05 Denmark, Poland,
Norway

8.2. Exposure controls

8.2.1. Appropriate engineering controls
Adequate ventilation should be used to convey finely divided metallic dust generated by grinding, sawing or polishing
operations, in order to eliminate explosion hazards.

8.2.2. Individual protection measures, such as personal protective equipment

Personal protection Use appropriate PPE when handling ingots and hot metal (CEN standards) and
flame retardant and molten metal splash resistant clothing when handling liquid
metal.
- Respiratory protection Respiratory equipment: not required under recommended conditions of use.
In case dust or fumes are released personal protective equipment required if
exposure limits are exceeded.
- Hand protection Wear suitable gloves.
- Ingestion Ingestion unlikely.

8.2.3. Environmental exposure controls

No special exposure controls necessary.

SECTION 9 Physical and chemical properties

9.1. Information on basic physical and chemical properties

9.1.a. Appearance Physical state : Solid at 1013 mbar / 20°C
Colour : Silvery or silvery grey
9.1.b. Odour None.
9.1.d. pH pH value : Not applicable on massive form.
9.1.e. Melting point / Freezing point Approx 660°C
9.1.f. Initial boiling point - boiling range Approx 2467°C
9.1.g. Flash point Not applicable on massive form.
9.1.i. Flammability Not applicable on massive form.
9.1.m. Relative density 2.7 g/cm3
9.1.n. Solubility Material nearly insoluble in water.
9.1.s. Explosive Properties Not applicable on massive form.

SECTION 10 Stability and reactivity

10.1. Reactivity
Stability and reactivity Stable under normal conditions of storage, handling and use.

10.2. Chemical stability

Stability Stable under normal conditions of storage, handling and use.

10.3. Possibility of hazardous reactions

Hazardous reactions Massive metal is stable and none reactive under normal conditions of use,
storage and transport.
Molten aluminium may react violently in contact with certain metal oxides and
nitrates (rust etc.).
Version 2020-01-13 Page 4 of 6
 SDS Constellium – Aluminium Metal Alloys

10.4. Conditions to avoid

Avoid melting wet or cold materials as molten metal may cause explosions in contact with water or wet surfaces.
In areas with very high dust concentrations, aluminium dust may form an explosive atmosphere.

10.5. Incompatible materials

None.

10.6. Hazardous decomposition products

None.

SECTION 11 Toxicological information

11.1. Information on toxicological effects

All data are given for aluminium as the main constituent

Acute toxicity None.

Rat oral LD50 > 5000 mg/kg bwt
Rabbit dermal LD50 No effects
Rat inhalation LC50 > 2.350 mg/l/4h
Irritation
Dermal irritation (rabbit) No effects
Eyes irritation (rabbit) No effects. Aluminium particles may produce irritation due to mechanical
abrasion or alloying element effect.
Sensitization None.
Repeated dose toxicity Sub acute oral Toxicity: None - Calculated DNEL 3,95 mg/kg bwt/day
Sub-acute inhalative Toxicity: None - see occupational exposure limits.
Calculated DNEL 3,7 mg/m3 respirable
Carcinogenicity Not classified.
Mutagenicity Not classified.
Toxicity for reproduction Not classified.

Symptoms related to the physical, chemical and toxicological characteristics

Specific symptoms in animal tests: none after swallowing, skin contact or inhalation

Other information
Toxicokinetics, metabolism and distribution:
Oral uptake < 0.1%, nearly insoluble in lung fluids. Most absorbed aluminium is rapidly excreted through urine. Main
deposit in body is in bone structure.

SECTION 12 Ecological information

12.1. Toxicity
All data are given for aluminium as the main constituent

Product/ingredient name Test Result Species Exposure

Al metal shavings Fish OECD TG 203 > 100mg/l Salmo trutta pH 8
Al metal shavings Daphnia OECD TG 202 > 100 mg/l Daphnia Magna pH 8
Al metal shavings Algae OECD TG 201 > 100 mg/l Selenastrum Capricor pH 8
Not classify for ecotoxicity
No acute or chronic classification is appropriate for Al alloys (massive) based on non-toxic results below the
Ecotoxicity
Reference Value (ERV) of tests with aluminium metal and alloying elements.

12.2. Persistence and degradability

Not relevant for metals

12.3. Bioaccumulative potential

Not bio-accumulative

12.4. Mobility in soil

Version 2020-01-13 Page 5 of 6
 SDS Constellium – Aluminium Metal Alloys

Not mobile under normal environmental conditions; may be leached from the ground at low pH (< 5.5) or high pH (>
8.5).

12.5. Results of PBT and vPvB assessment

Not relevant for metals

12.6. Other adverse effects

None.

SECTION 13 Disposal considerations

13.1. Waste treatment methods

General Metallic residues are secondary raw materials and subject of recycling
Special precautions Recycle aluminium alloys packing. Any disposal according to national regulation

SECTION 14 Transport information

General information Not regulated.

SECTION 15 Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or
mixture
No knowledge about classification or special regulations. Follow general rules for handling, transport and waste
management.
Chemical Safety Assessment carried out for Aluminium

SECTION 16 Other information

Further information In dealing with products the national laws and regulation must be observed and
applied.
This information is based on our present knowledge. However, this shall not
constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship

The contents and format of this SDS are in accordance with REGULATION (EC) No 453/2010 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL

DISCLAIMER OF LIABILITY The information in this SDS was obtained from sources which we believe are reliable.
However, the information is provided without any warranty, express or implied, regarding its correctness. The
conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond
our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss,
damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product.
This MSDS was prepared and is to be used only for this product. If the product is used as a component in another
product, this MSDS information may not be applicable.

End of document

Version 2020-01-13 Page 6 of 6