The document describes a methodology involving manipulating water and air flow rates through columns to measure pressure drops. The methodology involves keeping one flow rate constant while varying the other and recording pressure drop readings over time until a flooding point is observed.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
23 views1 page
METHODOLOGY Absorption Column
The document describes a methodology involving manipulating water and air flow rates through columns to measure pressure drops. The methodology involves keeping one flow rate constant while varying the other and recording pressure drop readings over time until a flooding point is observed.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1
METHODOLOGY
Part A
Constant water flow rate Repeat with water flow
Checked and make sure at 2.5L/min and rate at 3.0L/min and the valves for right manipulate air flow rate 3.5L/min at the same air column for saddle pack at 100L/min,,110L/min are opened. flow rate. and 120L/min
Every 3 minutes, took the
pressure drop reading and air flow rate was Record the pressure drop, increased by 10L/min ∆P from Digital ∆P meter interval until the flooding point was observed
Part B
Checked and make sure Constant air flow rate at
the valves for right 100L/min and manipulate water column for saddle pack flow rate at are opened. 2.5L/min,3.0L/min,3.5L/min
Every 3 minutes, took
Repeat with water flow the pressure drop reading Record the pressure rate at 3.0L/min and and water flow rate was drop, ∆P from Digital 3.5L/min at the same increased by 0.5L/min ∆P meter water flow rate interval until the flooding point was observed