Scribd
Upload
111 views4 pages

Instruction Sheet Is-Po9140 Style Number: Po9140Xx: Package Contents

1) The document provides installation instructions for a light fixture. It lists the included parts and provides warnings to turn off electricity before installation. 2) The instructions describe securing a mounting bracket into the ground and assembling the light posts by screwing them together. 3) Wires are connected from the light fixture to house wiring using wire connectors. The fully assembled light fixture is then secured onto the ground mounting bracket, completing the installation. Safety is emphasized throughout the assembly and installation process.

Uploaded by

dayshift5
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views4 pages

Instruction Sheet Is-Po9140 Style Number: Po9140Xx: Package Contents

1) The document provides installation instructions for a light fixture. It lists the included parts and provides warnings to turn off electricity before installation. 2) The instructions describe securing a mounting bracket into the ground and assembling the light posts by screwing them together. 3) Wires are connected from the light fixture to house wiring using wire connectors. The fully assembled light fixture is then secured onto the ground mounting bracket, completing the installation. Safety is emphasized throughout the assembly and installation process.

Uploaded by

dayshift5
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

INSTRUCTION SHEET IS-PO9140

6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: PO9140XX
www . quoizel . com

PACKAGE CONTENTS ISSUED 10-2010

PART DESCRIPTION QUANTITY


A
A Inner Hexagon Spanner 1 pc
B Bracket 1 pc
E
B
C Hexagon Socket-head Bolt 3 pcs
D Anchor Bolt with Nuts 3 pcs
E Upper Post 1 pc
C
F Medium Post 1 pc
G Bottom Post 1 pc

F
D

WARNINGS AND CAUTIONS


WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
off the circuit breaker or removing the fuse.
CAUTION:
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.

PREPARATION

● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Shovel, Electrical tape,
Wire cutter, Safety glasses and proper length Wires (not supplied) .
● Helpful Tools (not included): Wire strippers.

1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: PO9140XX

STEP 1:
a. Take off Lock Balls and Washers from Anchor Bolts. Lock Ball
b. Screw the nipple ends of Anchor Bolts into mounting Washer
holes on the Bracket. Place Washers back over the
Bracket
Anchor Bolts and secure with Lock Balls. Hand-tighten
until snug.
c. Thread Hex Nut against the Bracket and tighten until
snug. Hex Nut

Anchor Bolt

STEP 2:
a. Dig proper hole on the Earth from the desired location Bracket with Anchor Bolts
Wires
for Bracket with Anchor Bolts. Leave at least 1-3/4” to
2” of Bolts extruding from the earth’s surface. Concrete
1/3/4” - 2”
b. Cement grouting into the hole on the Earth to fix the
Bracket with Anchor Bolts. The top surface of the
Concrete should line up the earth’s surface.

Earth Earth

Tube

2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: PO9140XX

STEP 3:
a. Screw the nipple end of the Upper Post into the top end
of the Medium Post. Hand-tighten until snug.
b. Place the end of the Medium Post onto the top end of
the Bottom Post. Line up holes on the Medium Post and
mounting holes on the Bottom Post. Using the Inner
Hexagon Spanner, thread the Hexagon Socket-head
Bolts into the mounting holes on the Bottom Post to Upper Post
secure them. Hand-tighten until snug.

Medium Post

Inner Hexagon
Spanner

Hexagon
Socket-head Bolt

Bottom Post

STEP 4:
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires .
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
carefully. GROUND WIRE GROUND WIRE

FROM HOUSE FROM FIXTURE

3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: PO9140XX

STEP 5:
a. Take apart the Lock Balls and Washers from the Anchor
Bolts.
b. Place the end of the Bottom Post and Washers over the
Anchor Bolts. Secure by threading Lock Balls onto the Bottom Post
Bolts. Hand-tighten until snug.
Lock Ball
Washer

Bracket with Anchor Bolts


Anchor Bolts

Earth Earth

Your installation is completed now. Restore electricity. Retain this sheet for future reference.

4 OF 4

You might also like