Wf5 Tutorial

PTC/USER 2009
Pro/ENGINEER Wildfire 5.0
Hands On Workshop

WORKSHOP USE ONLY
Please do not write notes in this book or remove
from the workshop. It will be used by all participants.
PTC/USER 2009

Table of Contents
Interactive Modeling ...................................................................................... 3
U U
Molded Part Design Efficiency ..................................................................... 16
U U
Sheet Metal Design & Welding .................................................................... 22
U U
Flexible Assembly ......................................................................................... 36
U U
Simulation .................................................................................................... 46
U U
Drawing Workflow and Efficiency ................................................................ 59
U U
Pro/ENGINEER Manikin ................................................................................ 71
U U
Tolerance Analysis ....................................................................................... 78
U U

Pro/ENGINEER Wildfire Hands On Workshop Page 1

PTC/USER 2009

CAD Files
The CAD files required for this tutorial can be download from this location:
http://download.ptc.com/products/proe/wildfire5/tutorial/wf5_how_student_v2.zip
HU U

Document Format & Printing
This document is setup to be printed with (2) pages per sheet to minimize the total
number of printed pages. If available, please setup your printer for multi‐page printing.

Conventions
Information is provided at the start of many tasks.
Tips are provided along the way, with time‐saving or alternate techniques.
Notes are provided with additional useful details, which may not be required to
complete the tutorial.
• Menu commands are shown in Bold
• The comma character , is as a separator between commands
• Icons are shown in line with command text
• Keyboard keys are shown in Bold CAPS
• The left, middle and right mouse buttons are referred to as LMB, MMB, RMB


PTC/USER 2009

Interactive Modeling
0B
This tutorial will cover some of the new sketcher, feature and edit functions
in Pro/ENGINEER along with placement of User Defined Features (UDF) and
the Model Properties dialog box.
New Sketcher Functions
8B
1. File, Open , INTERACTIVE‐MODELING folder, select housing.prt, Open
Actual exercise model color may be different to improve contrast in sketcher

1. Select Sketch , select the surface shown below (with the hole) as the sketch
plane, Sketch, toggle on No Hidden

PTC/USER 2009

New sketching tools can directly create a slanted rectangle and a slanted

ellipse, providing flexibility and speed in feature creation.
2. Select the fly‐out arrow next to and select Slant Rectangle , sketch a

slanted rectangle in the sketch plane, do NOT snap the rectangle to any
references

3. Pick the fly‐out arrow next to and select Center and Axis Ellipse , start at
mid‐point of the width, end at the corner as shown, LMB to finish the ellipse

4. Select Chamfer , select the adjacent entities for length and width as shown
below, MMB to finish

PTC/USER 2009

5. Hold Ctrl and select the chamfer and the adjacent entity shown, RMB, review all
object‐action constraints, Equal
Sketcher constraints and workflows are more flexible. There are shortcut

menus, object‐action workflow, and a consolidated user interface.
6. Select Delete Segment , delete unnecessary sketch entities as shown

PTC/USER 2009

In the follow tasks, make sure to use the fly‐out to select Geometry
Centerline or Point. These are different than regular sketcher

counterparts. Depending on how the sketch is used, they can produce
datum features in the model.
7. Select the fly‐out arrow next to and select Geometry Centerline , sketch a

geometry centerline snapped to two corners as shown below

8. Select the fly‐out arrow next to and select Geometry Point , sketch a point
at any position inside the sketch, MMB to confirm

9. Select Done to finish sketch

PTC/USER 2009

10.Toggle on Shading display , Named View List , sketcher, toggle on Datum
Axis and Datum Point , review the datum axis and the datum point created
in the Sketcher, toggle off Datum Axis and Datum Point

11.Pick Extrude , select the sketch just created, RMB on the depth control handle ,
Symmetric, change the depth to 1.00, MMB to finish

12.Toggle Axis Display , note that the Geometry Point resulted in a Datum Axis,
toggle off the Axis Display

PTC/USER 2009

Undo/Redo
9B
Some operations will clear the stack. If you do not see the exact list as

shown below, experiment with a few operations and/or the choices
available.
1. Select the arrow next to Undo and select Undo: Sketch

2. Select the arrow next Redo and select Redo: Extrude

Dynamic Edit
10B
You can use the Dynamic Edit command to edit features and immediately
see the impact of dimensional changes on the model geometry. Use the 3D

drag handles on the section to move the entire section. Note that
constraints are enforced.

PTC/USER 2009

1. Select Round , RMB on an intersection edge between the extrude feature and
the box wall, Pick From List

2. Select the Intent Edges from list for two loops from intersection of extrusion and
the base model, OK

3. Change the round radii to 0.12, MMB to confirm
4. Select the extrude feature just created in the Model Tree or in the graphics
window, RMB Dynamic Edit, select 3D drag handle where the cursor points as
shown below

PTC/USER 2009

5. Move the entire feature towards the hole, review the dynamic changes

6. LMB on the graphic window to exit the dynamic edit

PTC/USER 2009

Failure and Diagnostics
In Pro/ENGINEER Wildfire 5.0, you can deal with failures now or later, and

models can now be saved with failed features. “Failed” geometry is shown
when possible.
1. Named View List , No_Resolve, select the BOSS_1 protrusion feature in the
Model Tree, RMB Dynamic Edit, RMB in the graphics window, check
Show/Hidden All Dims

2. Drag the dim R.13 control handle where the cursor points, dynamically change
the cut narrower until the feature fails and becomes red, LMB in the graphics
window to exit


PTC/USER 2009

There is no resolve mode in Pro/ENGINEER Wildfire 5.0. You are given a

warning and options to fix the failing feature(s).
3. Click OK to accept the result and we will fix the fails later on, review the failed
features highlighted in the Model Tree

4. Select BOSS_1 feature in the Model Tree, RMB Edit Definition, click Placement in
the dashboard, Edit…, drag and redefine the sketch until no intersected entities

Dynamic Edit can be used again for this step

5. Select Done , confirm, review the resolved features

PTC/USER 2009

User Defined Feature (UDF)
1B
You can place user‐defined feature (UDFs) using the new on‐surface
coordinate system as a reference. You can preview the UDF geometry as it

is being placed on the model, and also can see an immediate display of
changes in variable dimensions and even specify additional rotations about
the placement coordinate system
1. Toggle on Csys Display , Insert, User‐Defined Feature…, browse to
INTERACTIVE‐MODELING folder and select boss_udf.gph, Open
2. Check View source model option, resize the BOSS_UDF_GP window, OK, pick the
boss surface to specify the placement reference, toggle off Annotation display

3. Drag the two green placement handles to specify the location references

4. Drag the location handle and move, review the immediate udpates

PTC/USER 2009

5. Select Variables tab, change the rib_instance from 3 to 6, Enter, preview the
changes of UDF boss in the graphics window

6. Select Options, Adjustments tabs to review options, select , toggle off Csys
Display
Model Properties
12B
Model properties, such as materials, units, and accuracy, are located on a

common Model Properties dialog box. This new dialog box also contains
information on relations and parameters used in the model.
1. File, Properties, review all options of Model Properties
2. Select Change next to Material, RMB on the steel.mtl in the left column, Assign,
OK, Close the Model Properties window

PTC/USER 2009

3. Window, Close
4. File, Erase, Not Displayed


PTC/USER 2009

Molded Part Design Efficiency
1B
This tutorial will show some the new features and enhancements to assist in
the design of cast and molded parts including geometry patterns, the new
trajectory rib feature and enhancements to draft check analysis.
Pattern Enhancements
13B
1. File, Open , PART‐MOLDED folder, gearbox.prt, Open

2. Select Hole 1 in the Model Tree, Pattern


PTC/USER 2009

3. On dashboard, select Point from the drop‐down list for type, then the Use Points
option. In the Model Tree select Datum Point 7012, MMB or

4. In Model Tree, select Chamfer 1, Pattern , ensure that the type is Reference,
MMB or
In the next step, it may be helpful to change the smart filter to Geometry.

Refer to the Quick Reference card for guidance on this type of selection.
5. Select geometry using “surface and boundaries” technique. Pick top surface of
the protrusion shown, then Shift+Pick the shell at base of the protrusion.

6. Edit, Geometry Pattern
Geometry patterns make regeneration faster as compared to patterning

the entire feature definition.

PTC/USER 2009

7. Dashboard, Axis, select GEOMETRY_PATTERN_AXIS in Model Tree, enter 5 for
number of pattern members, Angular Extent , enter 180, MMB or

Trajectory Rib Tool
14B
1. In Model Tree, select sketch RIB1, pick Trajectory Rib in the dashboard enter
0.1 for the thickness, select Draft icon , Internal Rounds , External Rounds

2. Select Shape tab and enter 1 for the draft value, and 0.05 for internal rounds, and
Two‐Tangent round, MMB or

PTC/USER 2009

3. In Model Tree, select Trajectory Rib 1, Copy , Paste , in the Model Tree,
select sketch RIB2,
4. Paste , in the Model Tree, select sketch RIB3,


PTC/USER 2009

Draft Analysis
15B
1. Analysis, Geometry, Draft ,select GEARBOX.PRT in the Model Tree, Direction,
Surf:F27(SHELL)


PTC/USER 2009

2. At the bottom of the Color Scale select (options icon), Model Display,
Verticals, review results,

3. Window, Close


PTC/USER 2009

Sheet Metal Design & Welding
2B
This tutorial will show how to use some of the new functionality introduced
for sheet metal part design and use the new Welding user interface to
connect a welded subassembly.
Sheet Metal
16B
This portion of the tutorial will show the user how to pattern a flat wall, mirror
selections, and apply a reinforcement form to complete a sheet metal part.
Use the Search box in the upper‐right corner of the File Open dialog box to

dynamically filter the list. This makes it much easier to find a model from a
large directory.
1. File, Open , FRC‐TEAM1690 folder, frc‐team1690‐robot.asm, Open

2. LMB pick plate_electronics.prt from Model Tree or graphics window, RMB Open

PTC/USER 2009

3. LMB pick the Flat 8 feature as shown

4. Edit, Pattern
5. LMB pick attachment Edge:F20(Flat_7) as the direction reference
6. Flip the pattern direction
7. change the number of pattern members to 4
8. Set the member spacing to 70.6

PTC/USER 2009

9. Select from the dashboard or MMB
10.CTRL‐LMB pick Group MIRROR and Pattern 1 of Flat 8 from the Model Tree

11.Edit, Mirror
12.LMB pick datum plane MIRROR_REF from the Model Tree as the Mirror Plane
Reference
13.Select from the dashboard or MMB

PTC/USER 2009

14.Insert, Shape, Punch Form Tool
15.Open , FRC‐TEAM1690 folder, reinforcement_form.prt and place on
Surf:F12(Wall Surface)

16.Drag the left most green drag handle to Edge:F43(Flat_7__2) – the top rear edge
of the part

17.Drag the remaining green drag handle to Edge:F12(WALL SURFACE)

PTC/USER 2009

18.Select the placement tab check the Add rotation about first axis and enter 180
degrees
19.Enter 200 for the offset value from the first reference and 125 for the second
reference


PTC/USER 2009

20.Ensure the yellow direction arrow is facing down or LMB the arrow


22.LMB pick the WALL_EDIT feature from the Model Tree

PTC/USER 2009

23.RMB Edit Definition
24.Move each of the side drag handles from the current value of 80 to 75 or type ‐75
25.Select the Relief tab from the dashboard
26.Check the Define each side separately box
27.Set the relief for side one as Obround
28.Set the relief for side two as Rectangular


PTC/USER 2009

30.Window, Close
31.Window, FRC‐TEAM1690‐Robot.asm

Weld
17B
This portion of the tutorial will show the user how to leverage the new

user interface to place multiple sets of fillet welds, apply material
properties, combine annotations, and easily change the weld definition.
1. Expand CHASSI.ASM from the Model Tree, LMB pick
LOWER_FRAME_WELD.ASM, RMB Open

PTC/USER 2009

2. Application, Welding
3. Insert, Weld, Fillet Weld or select
4. LMB pick Surf:F5(EXTRUDE_1):FRAME_SIDE

5. RMB Side 2
6. LMB pick Surf:F5(EXTRUDE_1):BEAM_CROSS
7. CTRL‐LMB pick Surf:F5(EXTRUDE_1):BEAM_CROSS – the opposite side
8. CTRL‐LMB pick Surf:F5(EXTRUDE_1):FRAME_BACK

PTC/USER 2009

9. Change the Weld Leg Length D to 12
10.RMB New Set
11.LMB pick Surf:F5(EXTRUDE_1):BEAM_CROSS
12.RMB Side 1

13.LMB pick Surf:F5(EXTRUDE_1):BEAM_CROSS
14.CTRL‐LMB pick Surf:F5(EXTRUDE_1):BEAM_CROSS – the opposite side
15.CTRL‐LMB pick Surf:F5(EXTRUDE_1):FRAME_BACK

PTC/USER 2009

16.Select the Options tab and change the Weld Geometry Type to Light
17.Change the Weld Geometry Type back to Surface
18.Select Define for Weld Material
19.Select Define for Material and select AL6061, , Ok
20.Select Open and select FRC‐TEAM 1690 folder , frame.spwm, OK


PTC/USER 2009

22.Toggle on Annotation Display
23.LMB pick F9(1:Fillet Weld)


PTC/USER 2009

24.CTRL‐LMB pick F10(2:Fillet Weld)

25.Edit, Weld, Combine or RMB Combine to consolidate both welds to the same
annotation
26.Ensure Both Sides is selected

28.Change the selection filter from Smart to Annotation

PTC/USER 2009

29.LMB pick the weld value of 12 in the annotation

30.RMB Value enter 8
31.Select or MMB
32.Edit, Regenerate
33.Window, Close


PTC/USER 2009

Flexible Assembly
3B
This tutorial will show how to create simplified representations on the fly,
restructure components, copy‐n‐paste components to multiple locations and
use the new explode animation.
Simplified Representation OntheFly
18B
8. File, Open , FRC‐TEAM 1690 folder, frc_team1690‐robot.asm, Open Rep…,
Define…

9. In the dialog box type frame for the simplified representation name,
The dialog box and columns can be resized to simplify identification of

desired objects. When selecting for RMB actions, pick the object name,
NOT the checkbox. Selecting the checkbox will activate the default rule.
10. Expand the CHASSI.ASM, LMB LOWER_FRAME_WELD.ASM + Shift + first
occurrence of MOTOR_SPROCKET.ASM, RMB Representation, Master

PTC/USER 2009

11.At the upper‐right of the dialog box, try view options ‐ View, Show Active, Show
Inactive, Show All

12.Select CIM_GEAR_ASM.ASM, RMB Representation, Master, OK

PTC/USER 2009

13.In Model Tree, expand CHASSI.ASM and select LOWER_FRAME_WELD.ASM, Shift
+ MOTOR_SPROCKET.ASM , RMB Move to New Subassembly

PTC/USER 2009

14.Type Frame_ASM for the name, OK

15.Copy From Existing, Browse, template.asm, OK, RMB Default Constraint,

PTC/USER 2009

16.In the Model Tree, select and drag CIM_GEAR_ASM.ASM into newly created
subassembly FRAME_ASM.ASM
17.FRAME_ASM.ASM, RMB Open, Master Rep, OK
When restructuring, you must still be cognizant and careful about

implications of parent/child and external references.
Assembly Enhancements
19B
1. Assemble , FRC‐TEAM1690 folder, trailer_hitch.asm, Open, select In Window
and Separate Window


PTC/USER 2009

2. Model Tree(2) switch to Layer Tree

3. In Model Tree(2), ASSEMBLY_DATUMS, select F7(HITCH_PLANE)

4. In the FRAME_ASM.ASM layer, expand HITCH_ASM_DATUMS, expand
FRAME_BACK.PRT, F19(HITCH_PLANE)

PTC/USER 2009

5. In the TRAILER_HITCH.ASM layer, select F8(HITCH_ASM_AXIS_LEFT)
6. In the FRAME_ASM.ASM, select F20(HITCH_AXIS_LEFT),
7. Select to return to the Model Tree
Copy and Paste with RMB to Multiple Locations
20B
1. Select 1_4_20BHCS_BOLT_NABA.PRT, Edit, Copy , Edit, Paste

2. Select BRIDGE_WHEEL_LEFT_OUT:Surf:F7(HOLE_1) for the insert surface

3. Select BRIDGE_WHEEL_LEFT_OUT:Surf:F5(EXTRUDE_1) for the mate surface

PTC/USER 2009

4. RMB, New Location, on the other side of the frame, select
BRIDGE_WHEEL_RIGHT_OUT:Surf:F7(HOLE_1),
BRIDGE_WHEEL_RIGHT_OUT:Surf:F5(EXTRUDE_1),

Explode Animation and Edit Position
21B
1. Select MOTOR_SPROCKET.ASM in the Model Tree, RMB Open
2. View Manager , Explode Tab, Double‐click Default Explode, New, Enter,
Properties

PTC/USER 2009

3. Edit Position , Translate , CRTL+ select the 3 SPACER_DENSO.PRT, grab and
U U
hold X‐axis, move up as shown below

4. Rotate , select DENSO_PLATE.PRT, Edge:F5(EXTRUDE_1), grab and hold drag
handle and move as shown below


PTC/USER 2009

5. View Plane , select DENSO_WINDOW_MOTOR_2.PRT, grab and hold drag
handle and move as shown below,

6. List, Edit, Save, OK, Double‐click Default Explode, Double‐click Exp0001
7. RMB, Uncheck Explode

8. Select Close from dialog box
9. Window, Close
10.File, Erase, Not Displayed


PTC/USER 2009

Simulation
4B
This tutorial will show how to set up one of the new mechanism connections
for enhanced machine simulation, then setup, run, and analyze the results of
a structural analysis of a model using Mechanica.
Mechanism Belt Connection
2B
This portion of the tutorial will show the user how to set up a belt

connection within mechanism mode.
1. File, Open , FRC‐TEAM1690 folder, frc‐team1690‐robot.asm, Open

2. View, View Manager or select , double click Belts simplified rep, Close

PTC/USER 2009

3. Application, Mechanism
4. Insert, Belts or select
5. LMB pick Surf:F2(IMPORT_FEATURE):SPROCKET__CHAIN,
Ctrl+LMB pick Surf:F5(REVOLVE_1):MIDDLE_SPROCKET,
Ctrl+LMB pick Surf:F5(REVOLVE_1):MIDDLE_SPROCKET

6. Click and drag the white drag handle to untwist the third pulley

PTC/USER 2009

7. Select from the dashboard or MMB
8. View, Orientation, Drag Components or select click and move any of the three
pulleys (Observe the other pulleys moving through the belt connection)

9. MMB three times to close the drag window
10.Window, Close

PTC/USER 2009

Mechanica Analysis
23B
This portion of the tutorial will show the user how to reuse a weld feature,

automatically generate mid surface shells, work with heterogeneous units,
and view the results after running the analysis.
1. File, Open , FRC‐TEAM1690 folder, search with keywords naba_left,
naba_left.asm, Open the generic
2. Pick ANALYSIS.ASM from the Model Tree, RMB Open

3. Application, Mechanica
4. Insert, Connection, Weld or Select
5. Select Weld Feature from the Type drop down menu

PTC/USER 2009

6. Select F5(1:Fillet Weld, Rod:WELDMAT001)

7. Select OK
8. Insert, Midsurface, Auto Detect Shell Pairs

PTC/USER 2009

9. Select ANALYSIS.ASM from the Model Tree and enter 12 for the Characteristic
Thickness.

10.Select Start
11.AutoGEM, Review Geometry
12.Select Apply from the simulation geometry window

13.Select Close
14. Insert, Pin Constraint or select the arrow next to and select
15.LMB pick Surf:F6(Extrude_1):MAZLEG_SIDE

PTC/USER 2009

16.Select Fixed for both Angular Constraint and Axial Constraint
17.Select OK
18.Insert, Surface Region or select LMB pick part MAZLEG_SIDE.PRT

19.RMB Define Internal Sketch
20.LMB pick Surf:F6(Extrude_1):MAZLEG_SIDE

PTC/USER 2009

21.Click Sketch
22.Sketch, Circle, Center and Axis Ellipse or select the arrow next to and select

23.Click with the LMB once to define the center and a second time to define the
radius and a third time to finish (This ellipse can be approximate)

24.
25.Select Surf:F6(EXTRUDE_1):MAZLEG_SIDE as the placement surface

PTC/USER 2009

27.Insert, Force/Moment Load or select , select the previously created surface
region as the reference
28.Add a force of 800 N in the X direction and add a moment of 600 in lbf in the Z
direction
29.Change the units for force to KN
30.Select the 800 Value

PTC/USER 2009

31.RMB Convert to Unit, lbf

PTC/USER 2009

32.Select Preview

33.Select Ok
34.Analysis, Mechanica Analysis/Studies
35.File, New Static
36.Select OK

PTC/USER 2009

37.Select Run Select No for interactive Diagnostics
38.Once analysis has reached the complete status, Analysis, Results or select
39.Select Fringe for display type, and select Stress for the quantity
40.Select OK and Show

41.Insert, Results Window, select Analysis1, OK
42. Select Vector for display type and set the quantity to Displacement
43.Select Ok and Show

PTC/USER 2009

44.Window, Swap
45.Window, Close


PTC/USER 2009

Drawing Workflow and Efficiency
5B
Pro/ENGINEER includes many new enhancements for creating and working
with 2D drawings and improved interaction with 3D drawings.

• Improved creation and display of 2D & 3D annotations
• Improved display and management of annotations
• Easy creation and manipulation of geometry annotation
• Enhanced user experience and productivity
• Enhanced capabilities and support for 2D documentation
• Enhanced capabilities and support for 2D print and plotting
TaskBased User Interface
24B
1. File, Open , FTC‐ROBOT folder, search with keywords ftc, ftc‐robot.drw, Open
Now drawing commands are re‐organized into a ribbon‐style user

interface. The new user interface (UI) is designed to display only those
drawing commands which are appropriate for the current task.
2. Select Table tab, Annotate, Sketch, Review, Publish and review the ribbon‐style
top level UI
3. Select Layout tab, hold Alt and select the balloon in the drawing

PTC/USER 2009

Publish
The print preview display considers the current printer configuration to
determine line weights and styles, priorities and colors. The preview

displays white background paper space and users have full control
leveraging pan and zoom to assess preview display in the graphics window
1. Select Publish tab, click Preview , zoom in the plot preview to review what the
printed output looks like before sending it to the printer, Close Preview
2. Check PDF option, Settings , check Solid Hidden Lines in Line style column,
OK, Preview, in PDF reader, toggle on Pages , select page 1, page 2 and review
the pages, open Bookmarks , select new_view_1, new_view_3 in the
bookmarks list, review the details, Close Adobe Acrobat Reader
3. Window, Close
Model Annotation Tool
25B
Selectable drawing objects appear in a tree hierarchy, the content of the
Drawing Tree varies depending on the tab selected, simplifying the tree

structure. Objects are highlighted in the graphics window when you select
them from the graphics window or the Drawing Tree
1. File, Open , DETAILING folder, fan_cover.drw, Open
2. Annotate, expand Annotations of TOP_VIEW in the Drawing Tree, select
Model:d642, Model:d643, review the corresponding highlighted dimensions in
the graphics window

PTC/USER 2009

The new options gives user more control over the tolerance display and

allow the user to select the dimensions true significant digits
3. RMB the Model:d649 dim in the Drawing Tree, Properties, change Decimal
Places to 2, Enter to preview update, check the Rounded Dimension Value
option, change Tolerance mode from Nominal to Plus‐Minus, OK, review the
updates of the dimension

New Show Model Annotations tool for dimensions, GTOL’s, notes, surface
finish, symbols and datums can select by view or by feature within a view,

and annotations available to be shown will preview, you just select them
to show in the drawing

PTC/USER 2009

4. Select Show Model Annotations icon on the ribbon, select the thickness in the
Front Cross Section view as shown, preview dimensions, check d891 which stands
for the thickness of the part, OK, select the .10THICK and move it to empty area

5. Select Show Model Annotations icon, select the BOT_EXT_CUT feature from
the Model Tree, preview the dimensions showing up, Cancel

6. Select Show Model Annotations icon, pick model edge as shown below, see
the difference in what dimensions appear, Cancel

PTC/USER 2009

7. Select Geometry Tolerance from the Insert ribbon, select , Reference Type:
Feature

8. Select the hole feature in the Top view

9. Set Placement Type to As Free Note

PTC/USER 2009

10. LMB place the Geometry Tolerance Annotation below the hole note, OK

Sheet Tab & Hole Table
26B
Drawing sheets appear as tabs across the bottom of the graphics window.

The new Hole Table automatically includes extrude and revolve cuts in the
table
1. Click the hole_table tab at the bottom of the drawing area, RMB on hole_table
tab to show all shortcut options
2. Review the Hole table

PTC/USER 2009

3. Highlight STANDARD_HOLE_PATTERN, EXTRUDE_HOLE, REVOLVE_HOLE‐1 and
REVOLVE_HOLE‐2 features in the Model Tree, and in the drawing review the
corresponding highlighted holes created in different methods

4. Window, Close
Combined View Tab
27B
1. File, Open , DETAILING folder, bracket.prt, Open,
toggle on Annotation Display if necessary
You can easily navigate between the combined states of a model without

opening the View Manager. Combined or All states appear as tabs, each
with a thumbnail preview, in the graphics window
2. Select View Manager , All, check Display combined views, Close
3. Move cursor to combined view tabs at the bottom of the graphics window, show
the thumbnail preview of combined view

PTC/USER 2009

4. Click Mbd‐00‐Front tab, Mbd‐01‐Bottom, Mbd‐02‐Left, Mbd‐03‐Right, Show_All
combined view tabs to review the model information from different angles, RMB
on Show_All view tab, preview all shortcut options, select Redefine, change
Orientation to 3D‐Detail,
Layer Visibility
28B
You can create layer visibility states from the View Manager, and you can

toggle the display of all layer‐assigned content.
1. Select , select View Manager , Layers, double‐click Mbd‐00‐Front, Mbd‐01‐

Bottom, Mbd‐02‐Left, Mbd‐03‐Right, Show_All, and review the corresponding
layers visibility changes in the Layer Tree
2. RMB on ANNOT_ALL_TBLOCK in the Layer Tree on the Navigator, Hide, Repaint

3. Create New Layer on View Manager, No to Modified State Save, input the name
No_Titleblock, double click Show_All, then double click No_Titleblock, review the
layer state changes

PTC/USER 2009

Move Annotation to Plane
29B
1. Double click the Show_All layer state, change the global filter to Annotation,
select the hole annotation at top right corner, RMB in the graphics window, Move
to Plane

2. Select the top surface as showing, review the Z orientation update of the 3D
annotation

PTC/USER 2009

Target Datum Annotation
30B
1. Named View List , Datum_Target, Insert, Cosmetic, Designated Area, select
the sketch circle, MMB to confirm

3. Select Datum Target Annotation , OK to Add Annotation, Name: D, check
Geometry reference option, select the top surface of the part

PTC/USER 2009

4. Select a point on the top surface to place the annotation

5. OK on Set Datum Tag dialog box, RMB on the graphics window, Flip

6. Select Add from the annotation definition dialog box, select Browse… to open
defined symbol, double click single, select circareatgt.sym, Open, change Next
leader type to On Surface, select the designated area, move the mouse away and
MMB to confirm placement

PTC/USER 2009

7. Select Variable Text tab, Pick Dimension, select the radii 25 of the designated
area, OK, OK to close Datum Target Annotation Feature dialog box

8. Select the datum target annotation, RMB Select Reference

9. Window, Close


PTC/USER 2009

Pro/ENGINEER Manikin
6B
Objective
31B
This tutorial will show how to access Pro/ENGINEER Manikin, place a manikin
into a design assembly, position and define postures and run some simple
human factors analysis.
Insert Manikin
32B
The PTC Manikin library must be installed correctly to access the manikin
specified below. This can be downloaded or ordered from the Technical

Support Software Downloads page under Pro/ENGINEER. The
ptc_maniking.asm included with this exercise has limitations.
1. File, Open , MANIKIN folder, working_zone.asm, Open
2. Select Insert, Manikin to assemble a Manikin
3. Select M_IT_50.ASM from the population database and select Open.

The Manikin is added to your assembly; now move it near the workstation.
4. Saved View View 2
5. The Place Manikin dialog box defaults to a standing position and requires two
references…
• First, the right foot needs to be placed. Select the location by clicking on the
floor as indicated by the yellow circle below.

PTC/USER 2009

• Next, you will select a plane that the Manikin will face. Select the surface
indicated below.
6. Select OK in the Place Manikin dialog box
The left foot will interfere after initial placement; we will fix this in a

moment. This interference allows the manikin to get close enough to the
work cell equipment.

PTC/USER 2009

Posture and Reach
3B

Now you need to apply an appropriate posture to the Manikin.
1. Select Manikin > Apply Posture
2. In the Macro folder, select the CARRYING_BOX.MPD posture and Apply

3. Toggle the Reach Envelope on; select Manikin, Reach Envelope
5. Toggle the reach envelopes off; select Manikin, Reach Envelope

PTC/USER 2009

In addition to applying postures to the Manikin, you can manipulate the

Manikin into a desired position. You will use 2D drag to move the right
hand and arm.
1. Select Manikin, Manipulate
2. In the Manikin Motion dialog box, select 2D Body Drag. Click the middle of the
right hand once and slowly move the mouse upward.

3. When the hand is in place click once, then select Close in the Manikin Motion
dialog box.

PTC/USER 2009

Although this method is good for free‐hand manipulation of your manikin,

in this example the Reach tool will provide placement with greater
precision.
4. Toggle Point Display on
5. Select Manikin, Reach
6. The Reach dialog box requires three references…
• First, select the middle of the right hand
• Next, select the point shown in the image below
• Finally, select the end plane of the component that the Manikin is reaching
for
7. Select Close in the Manikin Motion dialog box.
Vision
34B

Now you will have the manikin look at a point in the assembly.
2. Select Manikin, Look At
3. The Look At dialog box requires two references…
• Since your Manikin is the only one in this session it is automatically selected

PTC/USER 2009

• Select the point circled in the image below
4. Select Close in the Manikin Motion dialog box
5. Toggle Display Points points off
6. Toggle the Vision Cones on; select Manikin, Vision Cones
Vision cones for manikins are available at any time. They represent…
• Peripheral vision (global vision)

• Binocular (the visual field that can be seen by both eyes)
• Optimal (operational zones)
• Accurate (reading zone)

PTC/USER 2009

8. Toggle the vision cones off; Manikin, Vision Cones

You can also view your assembly from the Manikin’s viewpoint.
10.Toggle the Vision Window on; select Manikin, Vision Window
11.Toggle the vision window off; select Manikin, Vision Window
12.Saved View View 7
13.Window, Close

PTC/USER 2009

Tolerance Analysis
7B
The objective of this analysis is to determine whether it is possible to
assemble the PCB into the assembly. The current assembly process specifies
that the bottom screws are to be installed and tightened first. Next, the plug
is snapped into holes in the PCB
Then the PCB assembly is placed into the assembly and the top screws
inserted and tightened. There should be a minimal gap between the plug and
the pan, but an interference condition could prevent the ability to insert the
screws into the PCB

Open Model and Set the View
35B
1. File, Open , TOLERANCE‐ANALYSIS folder, circuit‐card.asm, Open
2. Saved View ISO

PTC/USER 2009

Initiate Tolerance Analysis Measurement
36B
1. Analysis, Tolerance Study
The Tolerance Analysis Manager dialog box lists all of the existing
tolerance analysis measurements in this model. You can add, edit, and
delete tolerance analysis measurements from this dialog box.
2. Select the Add icon in the Tolerance Analysis Manager dialog box.
3. Now you will need to select two entities…
• First, select the inside vertical surface of the pan Surf:F1(FIRST
FEATURE):PAN (see the figure below).
• Select the hidden vertical surface of the plug Surf:F4(PROTUSION):REC‐
3PIN (see the figure below). Use Query Select or Pick from List.


PTC/USER 2009

Restarting a Measurement
If you make a mistake and you want to start over, you can right‐click in the
Measurement Table view and select Restart Measure from the shortcut
menu
Select Dimensions
37B
Redisplaying the Candidate Dimensions
During the dimension selection process, the candidate dimensions for the
active part are automatically displayed. You can change active parts by
clicking a new part. If you don’t see the expected dimensions, the wrong
part may be the active part. In that case, click the part from which you
need to select dimensions
1. Now you need to select four dimensions…
A. First, select 146 +/‐ 0.1, the pan length
B. Next, select 119.2, the basic locating dimension for the screw hole
C. Then, select 0.2, the position tolerance for the hole pattern
D. Last, select 3.5 +.1/‐0, the hole diameter


PTC/USER 2009

If you accidentally select the wrong dimension, you don’t have to start
over. During dimension selection, select Cancel in the Select menu. You
have a number of cancel options (shown in the Pro/ENGINEER prompt
area). Option 1 will undo the last selection and resume the selection
process.
2. In the Select Option dialog box, select Selected Cylinder is a Hole, then hit OK
3. Saved View UNDERNEATH
4. Click the bottom screw; then select 3.4 +0/‐.1, the major diameter of the threads

5. In the Select Option dialog box, select Selected Cylinder is a Pin, then OK

PTC/USER 2009

Explore the Tolerance Analysis Extension
38B
1. RMB Fit to Width in the Dimension Loop Diagram

2. Click the various objects in the Name column of Measurement Table. Then click
the various objects in the Dimension Loop Diagram. Notice the cross‐highlighting
between the two

Resume the Dimension Selection Process
39B
1. Saved View ISO
2. Choose the Select Model or Dimension icon in the Tolerance Analysis dialog
box

PTC/USER 2009

3. Click the PCB to display the candidate dimensions for that part; then select 3.5
+0.1/‐0, the hole diameter

4. In the Select Option dialog box, select Selected Cylinder is a Hole, then OK
5. Now you need to select two dimensions…
• First, select 25 +/‐ 0.2, the screw hole location
• Next, select 7.1 +/‐ 0.2, the plug hole location

PTC/USER 2009

6. Click the Plug to display the candidate dimensions for that part
7. Now you need to select two dimensions…
• First, select 8.8, the basic locating dimension for the snap fit
• Next, select 0.2, the position tolerance for the snap fit


PTC/USER 2009

Specify Measurement Limits
40B
1. Click Cancel in Select dialog box to pause the selection process
2. Rename the analysis to Fit_Clearance by typing in the text field at the bottom of
the Tolerance Analysis dialog box

3. Under the Goal heading in the Tolerance Analysis dialog box select Limit. Enter an
upper value of 1.0 and a lower value of 0.0

Modify the Interface Properties
41B
Whenever the last feature of one part and the first feature on the following part are a
pin and hole, the application creates a pin/hole interface. By default, the pin is assumed
to be centered in the hole. However, the clearance between the pin and the hole is
often an important consideration in a tolerance analysis, so you have a number of
options for how to represent that interface: centered right (tangent), left (tangent), or
floating
First, consider the screw in the pan. The screw is inserted into the hole and
tightened down in the standoff, so the screw is randomly located within
the clearance of the hole. This situation is best represented with the float
option

1. Select Float from the Attachment column for Pan/Screw below Pan

PTC/USER 2009

• With the Float command, the application introduces a variable that
represents the random variation of the location of the pin in the hole.
Notice that a double‐arrow in the Dimension Loop Diagram indicates that
this interface is floating

Now, consider the screw in the PCB. In this case, the screws are inserted
into the holes and loosely threaded into the standoffs. Before the screws
are tightened, the PCB can slide left or right until a hole comes in contact
with a screw. Since we are trying to predict the probability of fit for this
case, we should set the properties of this pin/hole interface to maximize
the clearance between the plug and the pan.
2. Select Left from the Attachment column for Screw/PCB below Screw

PTC/USER 2009

Notice that the vertical line joining the pin and hole in the dimension loop
diagram is at the left tangent location. The PCB is pushed away from the
interface that we are measuring (indicated by the dashed vertical lines) so
that the PCB hole is touching the pin on the left side. Notice also that the
nominal value of the measurement changes when you change the
interface from centered to left tangent.
Examine the Results
42B
1. Click the Results tab at the bottom of Tolerance Analysis dialog box to view the
analysis results


PTC/USER 2009

The Analysis Results view has two display regions. The left region shows a
variation plot for the measurement. The variation plot shows the statistical
variation plot and the worst‐case range for the measurement based on the
specified tolerances for the dimensions in the dimension loop.

The right region of the Analysis Results view is a tabbed display of
contribution and sensitivity plots. For example, the Statistical Contribution
plot shows the percent contribution of each dimension to the variance of
the measurement. The results indicate that two of the dimensions from
the PCB are the largest contributors (d266 and d43).

PTC/USER 2009

2. Click the tolerance field for the d266 dimension in the PCB. Change the value to
0.1 and press the Enter key. Then Close the input dialog box. Repeat these steps
for the d43 dimension in the PCB

Notice that when you make a change to the tolerance, the results
automatically update. You can continue to change the tolerance values
until you get the desired measurement variation. Note that the actual
Pro/ENGINEER dimension properties are not modified until you close the
Tolerance Analysis Extension Powered by CETOL Technology interface and
accept the changes.

PTC/USER 2009

3. RMB Create Report in the Measurement Table, and Close

The report is displayed in the Pro/ENGINEER browser. Click in the
Tolerance Analysis Extension Powered by CETOL Technology window to
save the tolerance analysis measurement feature, update the modified
Pro/ENGINEER tolerances and close the application
4. Window, Close

Congratulations! You have completed the tutorials in this Hands On
Workshop! Thank you for your participation and we look forward to having
you attend another Hands On Workshop in the future.

Wf5 Tutorial

Uploaded by

Copyright:

Available Formats

Wf5 Tutorial

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wf5 Tutorial

Uploaded by

Copyright:

Available Formats

2. Select the fly‐out arrow next to and select Slant Rectangle , sketch a

7. Select the fly‐out arrow next to and select Geometry Centerline , sketch a

1. Select , select View Manager , Layers, double‐click Mbd‐00‐Front, Mbd‐01‐

You might also like