RMX - Kontrol49 Read Me

Korg KONTROL49 Controller Templates
Using a hardware controller with Stylus RMX gives you maximum control
over your groove production. You can edit, re-mix, and manipulate RMX
grooves instantly in real time. It’s powerful, fun, and musically rewarding!
There are two main steps to perform in order to get started; loading the data
for the KONTROL49, and selecting the template in Stylus RMX.
The KONTROL49 has several illuminated displays that function as labels for
the main controls and scenes. Our templates take full advantage of those
features, allowing you to control all eight Stylus RMX parts simultaneously,
by changing scenes on the KONTROL49. You can switch in real-time from
mixing, filtering – even manipulating the Chaos Designer seamlessly for all
eight parts – and much more.
STEP 1 – SET UP THE KONTROL49
Make sure you have installed the hardware and software for the KONTROL49
according to KORG’s documentation.
The KONTROL49 holds twelve controller “scenes” in memory. Scenes can be

stored individually (.k4d extension) or as a Scene Set (.k4s extension).
A Scene Set is a collection of twelve Scenes. We have provided both a Scene

Set file as well as the individual files.
Should I use the Scene Set file or the individual Scene files?
Select the Scene Set file RMX_K49 Scene Set.k4s if you wish to load all of
the Scenes for RMX into the KONTROL49 in one easy step.
Alternatively, you can customize your own Scene Set using the KONTROL49
Editor Librarian. This allows you to mix and match RMX scenes with those
you already have. We’ve provided individual Scene data for this purpose.
Consult KORG documentation for details on how to use the Editor Librarian to
create custom Scene Sets.
TRANSMITTING A SCENE SET TO THE KONTROL49
IMPORTANT - This procedure will overwrite the contents of the

KONTROL49 memory.
1. Launch the KONTROL49 Editor/Librarian.
2. From the File menu, select “Open Scene Set…”.
3. Select the Scene Set file you wish to use.
(For example, RMX_K49 Scene Set.k4s). It is located in the

Korg Kontrol 49 directory within the MIDI Learn directory.
…/SAGE/Stylus RMX/Patches/MIDI Learn/Korg Kontrol 49/RMX_K49 Scene Set.k4s
4. Click “Open”.
The Editor/Librarian now shows the following:
5. Click on the Transmit button to send the data to the KONTROL49.

After a few seconds, the data transmission is complete. Press the
Scene button on the KONTROL49 to enter Play mode.
STEP 2 – SET UP STYLUS RMX
Make sure you have Stylus RMX version 1.5 or above installed.
SELECT THE CONTROLLER TEMPLATE IN RMX
From the Stylus RMX Utility menu (the button denoted with a Floppy icon),
select MIDI Learn / Load Template.
Select the template Korg Kontrol 49 Multi.ctl_rmx
You are ready to control Stylus RMX from the KONTROL49.

USING RMX AND THE KONTROL49
We have provided two controller templates for RMX. It’s important to

understand the difference between them.
Korg Kontrol 49 Multi.ctl_rmx is designed to work with all eight parts

simultaneously. Four KONTROL49 scenes work with this template:
RMXremix, RMX filt, RMXchaos, and RMXpitch.
Korg Kontrol 49 Part.ctl_rmx is designed to work on a single part; one

part at a time. There is only one scene designed to work with this template;
RMX PART.
Be sure that your host application is sending MIDI to RMX; then load grooves
into all eight parts.
On the KONTROL49, select the scene named “RMXremix”. (See KORG

documentation for instruction on how to select a scene.)
Press the SW1 switch on the KONTROL49 – and RMX will “ALL Play”. Press it
again to stop playback.
The table at the end of this document shows how the KONTROL49 hardware
controls are mapped to Stylus RMX. Have fun exploring the amazing features
of Stylus RMX from your hardware controller!
Note to Logic Pro 7 Users:
When launching Logic Pro 7.1 with a KONTROL49 connected to the computer, Logic
will assume that the KONTROL49 is a native Control Surface. You can defeat this
behavior by deleting the KONTROL49 icon in Logic’s Control Surface Setup page (in
Preferences), or you can follow the steps below to permanently disable this
behavior.
1. Ctrl+Click on the Logic Pro application icon on your Applications folder.

2. Select “Show Package Contents”
3. Delete the file microKONTROL.bundle located in
…/Logic Pro/Contents/MIDI Device-Plug-ins/microKONTROL.bundle
4. Delete the preference file com.apple.logic.pro.cs located in
~/Library/Preferences/Logic/com.apple.logic.pro.cs
CREATE AND SHARE YOUR OWN TEMPLATES
The templates we have provided are only the beginning of what you can do
with your hardware controller and Stylus RMX. We’ve provided a blank table
for you to document your own Controller Template creations. You will find it
in the User Template Tools folder, which is located inside the MIDI Learn
directory on your hard drive.
…/SAGE/Stylus RMX/Patches/MIDI Learn/User Template Tools/)
We encourage you to create your own templates, and then share them at the
Yahoo Spectrasonics User Group:
http://launch.groups.yahoo.com/group/spectrasonics/
Enjoy using Stylus RMX with your KONTROL49.
Best regards,
The Spectrasonics Team

KONTROL 49 Multi Part Template: Page 1
Remix Scene
HARDWARE CONTROLLER:
KORG KONTROL49 MIDI STUDIO CONTROLLER

HARDWARE DATA FILE: HARDWARE PRESET:
RMX_K49 Scene Set.k4s Scene Name: RMXremix Scene Pad: 1
STYLUS RMX TEMPLATE FILE:
Korg Kontrol 49 Multi.ctl_rmx
TEMPLATE OVERVIEW:
• Sliders 1-8 -> Mixer Level (Part 1-8)
• Rotary Encoders 1-8 -> Master Filter Tone
• Pitch Wheel -> Global Master Filter Tone
• Modwheel -> Master Level
• Pads 1-8 -> Solos (momentary)
• Pads 9-16 -> Part Play
• SW1 -> All Play/Stop
• SW2 -> Global Chaos Pattern Amount (momentary)
• Vector X -> Aux 1 Send
• Vector Y -> Aux 2 Send
• Messages -> Various Resets. See table.
Control CC# Channel Description

Slider 1 11 OMNI Mixer: Level Part 1
Encoder 1 74 OMNI Edit: Master Filter Tone Part 1
Vector-X 58 Host Channel Mixer: Aux 1 Send
Vector-Y 59 Host Channel Mixer: Aux 2 Send
SW1 51 OMNI All Play/Stop
SW2 52 OMNI Chaos: Momentary Global Chaos On/Off
- continues -
Remix Scene
Pitchwheel 56 OMNI Edit: Global Master Filter Tone
Modwheel 1 OMNI Master Level
Pad 1 35 OMNI Mixer: Solo Part 1 (momentary)
Pad 9 43 OMNI Footer: Play/Stop Part 1
MESG1 *Pad 9 Sysex RESET ALL MIXER LEVELS
MESG2 *Pad 10 Sysex RESET ALL PAN
MESG3 *Pad 11 Sysex RESET ALL MASTER FILTER TONE
MESG4 *Pad 12 Sysex RESET ALL MASTER FILTER EMPHASIS
MESG5 *Pad 13 Sysex RESET ALL COARSE PITCH
MESG6 *Pad 14
MESG7 *Pad 15
MESG8 *Pad 16
Foot Switch
Pedal
On the KONTROL49, Messages are sent by holding the MESSAGE button, then
pressing the corresponding Pad, 9 through 16.
Filter Scene

RMX_K49 Scene Set.k4s Scene Name: RMX filt Scene Pad: 2
TEMPLATE OVERVIEW:
• Sliders 1-8 -> Master Filter Tone
• Rotary Encoders 1-8 -> Master Filter Emphasis
• SW2 -> Global Chaos Pattern Amount (momentary)

Slider 1 74 OMNI Edit: Master Filter Tone Part 1
Encoder 1 82 OMNI Edit: Master Filter Emphasis Part 1
SW2 52 OMNI Chaos: Momentary Global Chaos On/Off
- continues -
Filter Scene
MESG6 *Pad 14
MESG7 *Pad 15
MESG8 *Pad 16
Foot Switch
Pedal
* On the KONTROL49, Messages are sent by holding the MESSAGE button, then
Chaos Scene

RMX_K49 Scene Set.k4s Scene Name: RMXchaos Scene Pad: 3
TEMPLATE OVERVIEW:
• Sliders 1-8 -> Chaos On/Off, Chaos Pattern Amount
• Rotary Encoders 1-8 -> Chaos On/Off, Chaos Buzz Amount
• SW2 -> Global Reverse (momentary)

Slider 1 90 OMNI Chaos: On/Off, Pattern Amount Part 1
Encoder 1 98 OMNI Chaos: On/Off, Buzz Amount Part 1
SW2 52 OMNI Edit: Momentary Global Reverse
- continues -
Chaos Scene

MESG6 *Pad 14
MESG7 *Pad 15
MESG8 *Pad 16
Foot Switch
Pedal
Pitch Scene
RMX_K49 Scene Set.k4s Scene Name: RMXpitch Scene Pad: 4
TEMPLATE OVERVIEW:
• Sliders 1-8 -> Coarse Pitch
• Rotary Encoders 1-8 -> Reverse
• Pitch Wheel -> Global Coarse Pitch

Slider 1 66 OMNI Edit: Coarse Pitch Part 1
Encoder 1 106 OMNI Edit: Reverse Part 1
SW2 55 OMNI Edit: Momentary Global Reverse
- continues -
Pitch Scene

Pitchwheel 56 OMNI Edit: Global Coarse Pitch
MESG6 *Pad 14
MESG7 *Pad 15
MESG8 *Pad 16
Foot Switch
Pedal
KONTROL 49 Single Part Template: Page 1
PART Scene

RMX_K49 Scene Set.k4s Scene Name: RMX PART Scene Pad: 12
Korg Kontrol 49 Part.ctl_rmx
This scene controls a single RMX part. Select the Korg Kontrol 49 Part.ctl_rmx template
when using this scene in the KONTROL49. The part you control is determined by the host
track/MIDI channel.
TEMPLATE OVERVIEW:
• Slider 1 -> Mixer Level (for current Part)
• Slider 2 -> Master Filter Tone
• Slider 3 -> Coarse Pitch
• Slider 4 -> Chaos Pattern Amount
• Slider 5 -> Amp Attack
• Slider 6 -> Amp Hold
• Slider 7 -> Amp Decay
• Slider 8 -> Amp Release
• Rotary Encoder 1 -> Mixer Part Pan
• Rotary Encoder 2 -> Master Filter Emphasis
• Rotary Encoder 3 -> Reverse
• Rotary Encoder 4 -> Chaos On/Off
• Rotary Encoder 5 -> Chaos Repeat Amount
• Rotary Encoder 6 -> Chaos Buzz Amount
• Rotary Encoder 7 -> Chaos Buzz Time
• Rotary Encoder 8 -> Chaos Buzz Speed
- continues -
PART Scene

Slider 1 11 Host Channel Mixer: Level
Slider 2 74 Host Channel Edit: Master Filter Tone
Slider 3 66 Host Channel Edit: Pitch
Slider 4 90 Host Channel Chaos: Pattern Amount
Slider 5 62 Host Channel Edit: Amp Attack
Slider 6 63 Host Channel Edit: Amp Hold
Slider 7 64 Host Channel Edit: Amp Decay
Slider 8 65 Host Channel Edit: Amp Release
Encoder 1 19 Host Channel Edit: Pan
Encoder 2 82 Host Channel Edit: Master Filter Emphasis
Encoder 3 106 Host Channel Edit: Reverse
Encoder 4 52 Host Channel Chaos: On/Off
Encoder 5 115 Host Channel Chaos: Repeat Amount
Encoder 6 98 Host Channel Chaos: Buzz Amount
Encoder 7 53 Host Channel Chaos: Buzz Time
Encoder 8 54 Host Channel Chaos: Buzz Speed
SW1 51 Host Channel All Play/Stop
SW2 55 Host Channel Edit: Momentary Global Reverse
Pitchwheel 56 Host Channel Edit: Global Master Filter Tone
Modwheel 1 Host Channel Master Level
- continues -
PART Scene

MESG1 *Pad 9 Sysex RESET CURRENT PART MIXER LEVEL
MESG2 *Pad 10 Sysex RESET CURRENT PART PAN
MESG3 *Pad 11 Sysex RESET CURRENT PART MASTER FILTER TONE
MESG4 *Pad 12 Sysex RESET CURRENT PART MASTER FILTER EMPHASIS
MESG5 *Pad 13 Sysex RESET CURRENT PART COARSE PITCH
MESG6 *Pad 14
MESG7 *Pad 15
MESG8 *Pad 16
Foot Switch
Pedal

RMX - Kontrol49 Read Me

Uploaded by

Copyright:

Available Formats

RMX - Kontrol49 Read Me

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

RMX - Kontrol49 Read Me

Uploaded by

Copyright:

Available Formats

Korg KONTROL49 Controller Templates

The KONTROL49 holds twelve controller “scenes” in memory. Scenes can be

A Scene Set is a collection of twelve Scenes. We have provided both a Scene

TRANSMITTING A SCENE SET TO THE KONTROL49

IMPORTANT - This procedure will overwrite the contents of the

1. Launch the KONTROL49 Editor/Librarian.

2. From the File menu, select “Open Scene Set…”.

3. Select the Scene Set file you wish to use.

(For example, RMX_K49 Scene Set.k4s). It is located in the

…/SAGE/Stylus RMX/Patches/MIDI Learn/Korg Kontrol 49/RMX_K49 Scene Set.k4s

5. Click on the Transmit button to send the data to the KONTROL49.

SELECT THE CONTROLLER TEMPLATE IN RMX

Select the template Korg Kontrol 49 Multi.ctl_rmx

You are ready to control Stylus RMX from the KONTROL49.

We have provided two controller templates for RMX. It’s important to

Korg Kontrol 49 Multi.ctl_rmx is designed to work with all eight parts

RMXremix, RMX filt, RMXchaos, and RMXpitch.

Korg Kontrol 49 Part.ctl_rmx is designed to work on a single part; one

On the KONTROL49, select the scene named “RMXremix”. (See KORG

Note to Logic Pro 7 Users:

1. Ctrl+Click on the Logic Pro application icon on your Applications folder.

…/Logic Pro/Contents/MIDI Device-Plug-ins/microKONTROL.bundle

4. Delete the preference file com.apple.logic.pro.cs located in

…/SAGE/Stylus RMX/Patches/MIDI Learn/User Template Tools/)

Enjoy using Stylus RMX with your KONTROL49.

The Spectrasonics Team

KORG KONTROL49 MIDI STUDIO CONTROLLER

RMX_K49 Scene Set.k4s Scene Name: RMXremix Scene Pad: 1

STYLUS RMX TEMPLATE FILE:

Korg Kontrol 49 Multi.ctl_rmx

Control CC# Channel Description

KORG KONTROL49 MIDI STUDIO CONTROLLER

STYLUS RMX TEMPLATE FILE:

Korg Kontrol 49 Multi.ctl_rmx

Control CC# Channel Description

KORG KONTROL49 MIDI STUDIO CONTROLLER

STYLUS RMX TEMPLATE FILE:

Korg Kontrol 49 Multi.ctl_rmx

Control CC# Channel Description

Control CC# Channel Description

STYLUS RMX TEMPLATE FILE:

Korg Kontrol 49 Multi.ctl_rmx

Control CC# Channel Description

Control CC# Channel Description

KORG KONTROL49 MIDI STUDIO CONTROLLER

STYLUS RMX TEMPLATE FILE:

Korg Kontrol 49 Part.ctl_rmx

Control CC# Channel Description

Control CC# Channel Description

You might also like