AIRDUC® PUR-INOX 355 MHF-AS

AS

Ex
Pre-PUR® Abr. Microbe FOOD EL +15%

1 3 Abrasion-proof and antistatic suction and

transport hose; PUR <10⁹ Ω + stainless
steel, heavy, smooth interior
2

Applications • polyurethane complies with: FDA 21 CFR • conform to RoHS guideline

• for transporting inflammable bulk materials and 177.2600 and 178.2010, EC guideline
in areas liable to contain explosive mixtures (ex- 2002/72/EC incl. the amendment 2008/39/EC Temperature Range
plosion protection) and 975/2009, German guideline XXXIX BfR • -40°C to 90°C
• for the food and pharmaceutical industry polyurethane
• for high flow-rates of abrasive solids such as • approved by an independent testing labora- Design, Material
powder, chips and granulates tory for the complete hose acc. to EU Direc- AIRDUC® profile hose
• for gaseous and liquid media tive 2002/72/EC, incl. amending Directive 1. spring steel wire firmly embedded in wall; spiral:
• for industrial vacuum cleaners, granulate con- 2007/19/EC stainless steel wire (INOX)
veying systems, printing machines, blowers and • Approved without additive* by an independent 2. profile with optimised flow properties; wall: per-
compressors testing laboratory for the complete hose accord- manently antistatic premium ether-polyurethane
ing EU Directive 2002/72/EU incl. amending Di- (Pre-PUR® )
Properties rectives 975/2009 and Regulation Nr. 10/2011 3. wall thickness 1,5 mm approx.
• according to TRBS 2153: permanently con- • * Food grade additives complies with: EU Direc- 4. reinforcement of the primary abrasion areas
ductive wall due to non-migrating permanent tive 2002/72/EU incl. 2007/72/EU
antistatic agent: Electrical and surface resis- • odourless and tasteless Delivery variants
tance <10⁹ Ω, recommended for transporting • microbe and hydrolysis resistant • further diameters and lengths available on re-
inflammable bulk materials • good resistance to oil, gasoline and chemicals quest
• heavy model • good resistance to UV and ozone • transparent (standard)
• smooth interior • very good low temperature flexibility (better than • customer-specific product marking
• optimized flow properties comparable ester-polyurethanes) • wall: „bioplastic“ material derived from renew-
• flexible with low weight • small bending radiuses able raw materials without food applicability
• increased pressure and vacuum resistance • kink-proof • as a pre-assembled hose system with CON-
• high tensile strength and tear resistant • free of softener and halogen NECT connectors
• gas and liquid tight • customised connectors

I.D. O.D. Over- Under- Bending Weight Dimensions Further Order No.
in / mm mm pressure pressure Radius kg/m in Stock Production
bar bar mm m Lengths
m
xxx

Standard Version
1 / 25 32 3,470 0,900 19,5 0,280 10 - 355-0025-1018
- / 30 39 3,200 0,880 24,0 0,395 - 10 355-0030-1018
1,25 / 32 42 3,095 0,875 26,0 0,440 10 - 355-0032-1018
1,36 / 35 45 3,010 0,870 27,5 0,480 - 10 355-0035-1018
1,5 / 38 48 2,925 0,865 29,0 0,520 10 - 355-0038-1018
- / 40 50 2,900 0,855 30,0 0,540 10 - 355-0040-1018
1,75 / 44-45 55 2,615 0,845 32,5 0,600 - 10 355-0045-1018
2 / 50 60 2,330 0,835 35,0 0,660 10 - 355-0050-1018
- / 55 65 2,145 0,785 37,5 0,720 - 10 355-0055-1018
2,36 / 60 70 1,955 0,730 40,0 0,780 10 - 355-0060-1018
2,5 / 65 75 1,815 0,675 42,5 0,840 10 - 355-0065-1018
- / 70 81 1,690 0,605 62,0 0,980 10 - 355-0070-1018
3 / 75 86 1,575 0,555 65,5 1,050 10 - 355-0075-1018
- / 80 91 1,480 0,505 69,0 1,110 10 - 355-0080-1018
3,5 / 89-90 101 1,335 0,430 76,0 1,300 - 10 355-0090-1018
4 / 100 111 1,190 0,355 83,0 1,490 10 - 355-0100-1018
- / 110 121 1,085 0,325 90,0 1,630 - 10 355-0110-1018
4,5 / 114-115 126 1,045 0,305 93,5 1,700 - 10 355-0115-1018

Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the
inside of the hose arch. Additional technical data at www.norres.com. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data.

www.norres.com
20141010

1
 AIRDUC® PUR-INOX 355 MHF-AS
AS

Ex
Pre-PUR® Abr. Microbe FOOD EL +15%

I.D. O.D. Over- Under- Bending Weight Dimensions Further Order No.
in / mm mm pressure pressure Radius kg/m in Stock Production
bar bar mm m Lengths
m
4,72 / 120 131 1,000 0,280 97,0 1,770 - 10 355-0120-1018
5 / 125 136 0,960 0,265 100,5 1,840 10 - 355-0125-1018
- / 130 141 0,930 0,250 104,0 1,955 - 10 355-0130-1018
5,5 / 140 151 0,865 0,215 111,0 2,185 - 10 355-0140-1018
6 / 150 161 0,800 0,180 118,0 2,410 10 - 355-0150-1018
6,3 / 160 172 0,785 0,185 125,0 2,560 - 10 355-0160-1018
6,5 / 165 176 0,765 0,180 128,5 2,645 - 10 355-0165-1018
- / 170 182 0,745 0,170 132,0 2,730 - 10 355-0170-1018
- / 175 187 0,725 0,160 135,5 2,815 - 10 355-0175-1018
7 / 178-180 191 0,700 0,150 139,0 2,900 10 - 355-0180-1018
8 / 200 213 0,630 0,135 156,0 3,120 10 - 355-0200-1018
- / 225 241 0,580 0,125 177,5 3,395 - 10 355-0225-1018
9 / 228-229 245 0,575 0,125 180,0 3,430 - 10 355-0228-1018
- / 250 269 0,530 0,115 198,5 3,670 - 10 355-0250-1018
10 / 254 274 0,520 0,115 202,0 3,715 - 10 355-0254-1018
- / 275 297 0,475 0,105 220,0 3,945 - 10 355-0275-1018
11 / 280 303 0,465 0,105 224,0 4,000 - 10 355-0280-1018
- / 300 325 0,425 0,095 241,0 4,220 - 10 355-0300-1018
12 / 305 331 0,415 0,095 245,5 4,275 - 10 355-0305-1018
- / 315 342 0,395 0,090 254,0 4,385 - 10 355-0315-1018
- / 325 353 0,375 0,085 262,5 4,495 - 10 355-0325-1018
13 / 330 359 0,365 0,085 266,5 4,550 - 10 355-0330-1018
- / 350 381 0,325 0,075 283,5 4,770 - 10 355-0350-1018
14 / 356 388 0,315 0,070 288,5 4,835 - 10 355-0356-1018
- / 400 436 0,225 0,001 326,0 5,320 - 10 355-0400-1018
16 / 405-406 443 0,215 0,001 331,0 5,385 - 10 355-0406-1018
- / 450 490 0,125 0,001 368,5 5,870 - 10 355-0450-1018
18 / 457 498 0,110 0,001 374,5 5,945 - 10 355-0457-1018
- / 500 544 0,020 0,001 411,0 6,420 - 10 355-0500-1018
20 / 508 552 0,001 0,001 418,0 6,510 - 10 355-0508-1018

Accessories

CLAMP 212 CLAMP 216 CLAMP 212 EC CLAMP 217 CLAMP 213 CONNECT 228

CONNECT SAFETY CONNECT PRESS CONNECT MOULD CONNECT THREAD CONNECT TRI-CLAMP CONNECT DAIRY FITTING
CLAMP ASSEMBLY 231 ASSEMBLY 232 ASSEMBLY 233 FITTING 234 FITTING 245 247

Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the
inside of the hose arch. Additional technical data at www.norres.com. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data.

www.norres.com
20141010

2
 AIRDUC® PUR-INOX 355 MHF-AS
AS

Ex
Pre-PUR® Abr. Microbe FOOD EL +15%

CONNECT ASEPTIC CONNECT 240 + 241 CONNECT 240 + 241 MHF CONNECT 242 CONNECT 243 CONNECT 243 MHF
FITTING 249

CONNECT 244 CONNECT 244 MHF CONNECT 245 CONNECT 245 MHF CONNECT 246 CONNECT 246 MHF

CONNECT 223 CONNECT 270-271

Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the
inside of the hose arch. Additional technical data at www.norres.com. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data.

www.norres.com
20141010