INSPECTION REPORT

Factory Audit
Report No. : H-XXXXXXX

INSPECTION INFORMATION
Client XXX
Factory XXX
Factory Address XXX
Contact Person XXX Telephone XXX
Mobile Phone XXX Fax. XXX
E-mail XXX Web: XXX
Date of Audit 2013/6/7 Auditor(s) Mr. Nick Lin
Audit Stage Initial Audit Follow-up Audit Re-Audit (Previous report No.: ________ )
Audit Regulation GWI-PE-TQA-020-HQT

Participators from the factory:

Name Department Position Name Department Position
XXX Sales Sales Director XXX Sales Sales

AUDIT RESULT SUMMARY

Audit Criteria Standard Actual
Percent Grade
Part 0 General Information Score Score
Part 1 Infrastructure and production machines 35 26 74% C
Part 2 Production process control 35 23 66% C
Part 3 Packing, handling and storage 30 21 70% C
Part 4 Training, knowledge, skill, and experience 30 13 43% D
Part 5 Inspection/testing and quality control 40 18 45% D
Part 6 Documentation of management / records control 30 22 73% C
Part 7 Managers in High-Level 30 20 67% C

OVERALL CONCLUSION (GRADE): D

Remark:
Nil

Approved by HQTS Supervisor:

Doc No.: IRP-174-HQT Page 1 of 15

 SPECIAL ATTENTION POINTS
No. Problem Description Ma Min
1 According to factory’s internal program file “xxx finished product inspection control program”
5.1.1, “CR:0, Maj 0.4 Min. 0.65” was required, however, “CR 0, Maj 0.4, Min 1.0” was found
on the other work instruction sheet “MID finished product inspection standard”
2 Multi-meter(S/N:xxxxxx) was found on SMT room for IPQC checking, however, no calibrated
record was found,
And Multi-meter(CAL-xxx) was found on work line for IPQC checking, however, the calibrated
record was out of date.
3 One test facility- AOI examines for PCB quality checking was found on factory, however,
factory use qc to check PCB quality by visual instead of this test facility, factory claimed that
the related qc was sent out for operate training due to software update, they will use it after
training was finished.
4 No inspection work instruction sheet regarding with Game Sonsole was found on factory, only
inspection work instruction sheet for tablet PC.
GENERAL COMMENTS
1 XXX is a private Chinese company, was founded on 2012/4/12, and they had an office mainly for Game
Sonsole research and development. And this company shows some items of Game Sonsole that were
developed by them, however, no documented quality system was adopted.
2 And product producing was at other location, the factory name was xxx, it seems the sales director, xxx,
was familiar with both company XXX and XXX, however, he could not provide any evidence to show the
relationship between these two companies. The production was performed in company 2.
3 Factory XXX had set up a documented quality system based on ISO9001, and also based on ISO14000,

FOLLOW UP SUGGESTIONS
For factory:
1 It was recommended factory to correct their internal work instruction sheet, to make sure all AQL was
suitable.
2 It was recommended factory to send their all test facilities to calibrate in time, to make sure their precision.
3 It was recommended factory to provide enough test facilities for PCB quality checking, and also could use
them for PCB checking.
4 It was recommended factory to compile related work instruction sheet for Game Console.
For client:
1 The production was performed in XXX.
2 It was recommended client to add more detail items in PO, such as all technical requirement, and quality
responsibility, etc.
3 It was recommended client to place a small order at first.
4 It was recommended client to conduct a During-producing Inspection and Pre-shipment Inspection to
make sure the bulk goods was confirmed to client’s requirement.

Doc No.: IRP-174-HQT Page 2 of 15

Audit details are as follows:
Part 0 General Information
 Manpower:
Staff Total number Percentage Staff Total number Percentage
Manager 5 1.9% Technical personnel 25 11.9%
Q.C 30 14% Workers 130 61.9%
Others 30 14% Total number of staff 210 -
 Production planning per day:
One shift: 8 hours / per shift Two shifts: hours / per shift Three shifts: hours / per shift
 Production capability:
Product History of Production (Year) History of Export (Year) Output per Month
MID(tablet PC) 3 3 30Kpcs
Game Console 1 1 10Kpcs

 Production area and workshops:

Only one production area
Total __2__ production area, details:
Location 1: XXX Location 2: XXX
 Technical capability of designing the product:
Design the products independently Design the products jointly Not design any product
 Technical capability of production:
Produce the products Assemble the products Subcontract the order to other factory
 Main production machines/equipments:
Machine Name Numbers Machine Name Numbers
Yamaha SMT 4 temperature humidity chamber 1
AOI examines 1

Doc No.: IRP-174-HQT Page 3 of 15

No. Check and Audit Points Grade
Part 1 Infrastructure and Production Machines
Is the layout/ buildings of the factory /workshop/warehouse reasonable and benefiting the
1.1 C
production?
Do there exist some pollutants like soot, dirt, acid mist and etc. around the factory /workshop B
1.2
/warehouse that affect the production?
Are the workshop/ production lines maintained cleanliness, tidiness and suitable for the B
1.3
production？
Are electronic communicated apparatus such as telephone, fax and other office apparatus such B
1.4
as computer, copycat available in the factory?
Does the factory have adequate kinds/quantities of machines/equipment/fixtures for the C
1.5
production of intended products?
Does the factory maintain the machines/equipment/fixtures regularly to ensure their continuing B
1.6
process capability?
1.7 Based on observation on-site, are the machines/equipment/fixtures in a good condition? B
Part 2 Production Process Control
Does the factory adopt a proper way to make on-the-spot workers understand the concrete
2.1 B
requirements of orders/ plans and the amendments of production?
Does the factory formulate operating instructions for key working process and issue them to B
2.2
related workstations?
Do the operating instructions correctly stipulate the process parameters, product characteristics C
2.3
and workmanship criteria?
Does the factory adopt adequate ways to monitor and control the suitable parameters and C
2.4
product characteristics on key process?
Base on observation on the spot, do workers operate correctly and meet the requirement in the C
2.5
production process?
Are those raw materials, semi-finished products, finished products in workshop arrayed/stock in C
2.6
good order and carefully protected to avoid confused or damaged?
Does the factory adopt a suitable way such as marking, labeling and etc. to identify the raw C
2.7
materials/semi-finished products/finish products to avoid confusion?
Does the factory adopt a suitable way such as marking, labeling and etc. to identify the raw C
2.8 materials/semi-finished products/finish products/samples for specified client to avoid it confusion
with other clients?
Part 3 Packing, Handling and Storage
Does the factory use adequate method/material to pack the products to ensure conformance with
3.1 C
specified requirements?
Does the factory use proper methods/containers/utensils for handling and delivery of product to B
3.2
prevent damage or deterioration?
3.3 Are the warehouses keeping clean, bulk goods piled up suitably? B
Does the factory adopt appropriate methods to prevent the stored goods from improper pressing, C
3.4
crashing, sun burning, leaking, mildewing or insects bite?
Does the factory adopt a suitable way such as making, labeling, and etc. to identify stored goods B
3.5
especially for specified client’s goods to avoid confusion?
Does an appropriate system or methods for controlling receipt and dispatching from stock area C
3.6
exist in the factory?
Part 4 Training, Knowledge, Skill, and Experience
Does the factory exist and implement training procedures / plans to train personnel performing
4.1 C
activities affecting quality?
Base on observation or exam on-spot, are those workers well-trained and skillful for the assigned D
4.2
work?

A=Outstanding=5 B=Good = 4 C=Acceptable =3 D=Below requirement=1 E=Absent or Not-available =0

Scoring:
N= Not Applicable (Not be scored)
Page 4 of 15
No. Check and Audit Points Grade
Are the workers with good attitude regarding to production, quality requirements, inspections and C
4.3
re-work action?
Has the factory ever provided enough courses of product standard and inspection/testing to the D
4.4
Q.C/inspectors?
Base on observation or exam on-spot ，does those Q.C/inspectors have suitable knowledge/ D
4.5
ability/ skill to meet the requirements for their assigned work?
Are the leader of Q.C department, managers of workshop with good attitude regarding to the 2nd B
4.6
and 3rd part’s inspection or audit?
Part 5 Inspection / Testing and Quality Control
Does the factory carry out receiving inspection/testing process when receiving or before using the C
5.1
purchased materials and subcontracted product?
Does the factory set up adequate number of inspect/testing stations on suitable process of C
5.2 production to ensure that the quality of product conformed to the specified requirement before
being released?
Does the factory designate an adequate number of inspectors to perform the in-process C
5.3
inspection and testing?
Does the factory carry out the final inspection for all batches of products in accordance with the C
5.4
final inspection standard?
Does the factory formulate the final-inspection standard for all products? Are all related D
5.5
parameters/characteristic/criteria and inspection methods stipulated on the standard?
Does the factory ensure that only when the result of final inspection meet specified requirement C
5.6
or standard, the product can be released?
Does the factory equipped with adequate types and quantities of inspection and testing D
5.7
equipments/ apparatus for final inspection?
Are the inspection/ measuring and test equipments used for final-inspection calibrated and well D
5.8
maintained?
5.9 When finding nonconforming product, does the factory identify and segregate them immediately? C
5.10 Does the factory carry out re-inspection/testing for all reworked and repaired products? C
Part 6 Documentation of Management / Records Control
Does the factory have document such as management manual to describe the quality
6.1 B
management
Dose the factory has document to define the responsibility, authority of the personnel who
6.2 B
manage, perform and verify work affecting quality?
Does the factory has established and documented min management procedures which affecting
6.3 B
quality strictly?
Does the factory have procedure for collecting, filling, storage, maintenance and etc of product
6.4 B
quality records?
Does the factory preserve related quality records (especially final inspection records, calibration
6.5 C
of testing equipment records) in an adequate period?
Are the data and information recorded in those quality records clear, integrated, veracious and
6.6 C
signed by related recorder?
Part 7 Managers in High-Level
7.1 What about the knowledge, experience and ability of the managers in high-level C
What is the attitude of the managers in high-level for client’s requirement, inspection, quality,
7.2 B
nonconforming product and corrective action?
7.3 What is the attitude of the managers in high-level for this audit? B
7.4 Does the factory respond the customer’s complaint in time and deal with it correctly? C
7.5 When problems on trade appear, is the factory willing to undertake their relevant responsibility? C
7.6 When the customers require compensation, is the factory willing to indemnify the client’s lost? C

A=Outstanding=5 B=Good = 4 C=Acceptable =3 D=Below requirement=1 E=Absent or Not-available =0

Scoring:
N= Not Applicable (Not be scored)
Page 5 of 15
 PHOTO ATTACHMENT

1 Factory office

1 Office view 1 2 Office view 2

3 Office view 3 4 Office view 4

2 License and certificate

1 Business license 2 tax registration certificate

Page 6 of 15
 3 Organization Code Certificate 4 ISO9001 Certificate of registration

5 ISO1400 Certificate of registration 1 6 ISO1400 Certificate of registration 2

03 Warehouse

1 Warehouse office 1 2 Warehouse office 2

Page 7 of 15
 3 Raw material warehouse 4 Finished product warehouse
04 Workshop

1 SMT workshop 1 2 Work instruction for SMT machine 1

3 Work instruction for SMT machine 2 4 Work instruction for SMT machine 3

Page 8 of 15
5 Work instruction for SMT machine 4 6 Work instruction for SMT machine 5

7 Work instruction for SMT machine 6 8 Work instruction for SMT machine 7

9 Work instruction for SMT machine 8 10 Work instruction for SMT machine 9

Page 9 of 15
11 Daily producing record 12 SMT daily maintain record

13 Workline 1 14 Workline 2

15 Workline 3 16 Packing

Page 10 of 15
 05 QC

1 IQC 2 IQC record

3 Work instruction for IQC 1 4 Work instruction for IQC 2

5 Work instruction for IQC 3 6 SMT first article inspection record 1

Page 11 of 15
7 SMT first article inspection record 2 8 SMT first article inspection record 3

9 SMT first article inspection record 4 10 IPQC daily record 1

11 IPQC daily record 2 12 FQC 1

Page 12 of 15
 13 FQC 2 14 Test facility for outside QC

15 temperature humidity chamber 16 Test facility 1

17 Test facility 2 18 Test facility 3

Page 13 of 15
 19 Test facility 4 20 Test facility 5

21 Test facility 6 22 Out of date calibrated record

23 Finished product inspection work instruction for table 24 Finished product inspection work instruction for
PC table PC

Page 14 of 15
 06 Global Circuit Document system

1 organization chart 2 Quality manual 1

3 Quality manual 2 4 Quality management procedure files

5 Quality target completion statistics for 2012 6 Qualified supplier list

******************************** End of Report ********************************

Page 15 of 15