DATA SHEET PAGE 1 OF 12

VACUUM SYSTEM REV, B

PROJECT NO. 06049D UNIT Catalytic Dewaxing Unit(CDW)

PROJECT L - PROJECT ITEM NO. CD - J0251

CLIENT Patra-SK SERVICE Vacuum System

PO NO.

REVISION INDEX

REV. DESCRIPTION AND/OR REVISED SHEETS

A ISSUE FOR APPROVAL

B REVISED AS MARKED

Licenser PJT Spec.

Sht Rev. Sht Rev.

REV. A B
DATE Aug.07 '06Mar. 13 '07
PRP'D BY I.K.Shin U.C.Hwang

CHK'D BY UCH/YNJ Y.N.Joo

APP'D BY C.S.Koh J.H.Rha
 PAGE 2 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
STEAM JET EJECTOR SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1 Manufacture Serial No.
2 Other
3
4 TYPE OF UNIT
5 No. of Stages Two Single Element Multiple Elements No. Noncondensing Type Condensing Type
6 Precondenser Intercondenser Aftercondenser Each Element 100% Capacity
n contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7 Barometric Type Barometric Type Barometric Type Element Capacity 1st 3rd
8 Surface type Surface type Surface type 2nd 4th
9
10 OPERATING CONDITION
11 Motive Steam : Nozzle Design Min. Pressure 8.5 (6) kg/cm2G Minimum Temperature 185 (6) ℃
12 Steam Chest Design Nor./ Max. Pressure 10.5 /12.7 (6) kg/cm2G Nor./ Max. Temp. 189 /193 (6) ℃
13 Cooling Water : Temp.(In) 35 ℃ Max. Temp.(Out) 43 ℃ Max. Pressure 4.0 kg/cm2G
14 Suction Pressure (Measured at Suction Inlet) 100 (4) mmHgA
15 Discharge Pressure (Measured at Discharge of Final Stage) 921 (5) mmHgA
16 Ejector to be designed for stability at shutoff ? Yes No
17 Normal Barometric Pressure at Site of Installation 1.033 kg/cm2A
18 Height Required for Barometric Leg Min.15.3 m
19 CAPACITY FOR ONE UNIT
20 Entrained Gas Total 1746x1.4 (1) kg/hr Avg. Mol. Wt. 31 Temperature 65 (4) ℃
21 Consisting of : 29x1.4 kg/hr 29 Mol. Wt. Air 10x1.4 kg/hr 57.4 Mol. Wt. Cracked Gas (3)
22 858x1.4 kg/hr 18 Mol. Wt. Water Vapor kg/hr Mol. Wt.
23 849x1.4 kg/hr 113.5 Mol. Wt. C5 + HC (2) kg/hr Mol. Wt.
24 Evacuation Requirement (if any) to evacua 91 m3 System filled with N2 (gas) at a temperature of 30 ℃ B
25 from an initial pressure o 1.03 kg/cm2A to a final pressure o 100 mmHg A
26 in minutes, with kg/hr Max. air in leakage during evacuation.
27
28 EJECTOR STAGES CONNECTIONS MATERIAL OF CONSTRUCTION
29 Size or Suction Discharge Steam inlet Steam Steam Suction
Stage Steam (kg/hr) Diffuser
30 Model No. (Size/rtg/fcg) (Size/rtg/fcg) (Size/rtg/fcg) Chest Nozzle Chamber
31 First By vendor By vendor By vendor By vendor By vendor CS (7) 316 SS CS (7) CS (7)
32 Second By vendor By vendor By vendor By vendor By vendor CS (7) 316 SS CS (7) CS (7)
33 Third
34 Fourth
35 Fifth
36 Sixth
37 Total Motive Steam Diffuser Steam Jackets on Stages None First Second Third
38
39 NOTE
40 (1) Flow 140% of normal for case "100N EOR".
41 (2) C5 + HC TBP distillation at 760 mm Hg(for 1, 10, 30, 50, 70, 90, 98 vol% distilled): 34, 49, 98, 144, 159, 179, 245℃.
42 (3) Cracked gas composition (mol%): H2=0.00003, H2S=0.003, NH3=0.0012, C1=0.002, C2=0.046, C3=4.79, C4=95.158.
43 (4) Pressure and temperature at precondenser inlet.
44 (5) Discharge pressure and temperature at aftercondenser outlet nozzle.
45 (6) Mechanical design for steam is 12.7 kg/cm2(g), 204℃.
46 (7) CA is 3 mm for CS parts.
47 (8) DELETED B
48 (9) Cooling water flow is parallel flow.
49
50

566801442.xls
This datasheet and information contained therein are
51
52
53
54
55 REVISION LOG
56 REVISION ISSUE STATUS DATE PRP'D BY CHK'D BY APP'D BY
57 A ISSUE FOR APPROVAL Aug.07 '06 I.K.Shin UCH/YNJ C.S.Koh
58 B REVISED AS MARKED Mar. 13 '07 U.C.Hwang Y.N.Joo J.H.Rha
59
60

566801442.xls
 PAGE 3 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 - E1 Q'TY One
S&T HEAT EXCHANGER SERVICE Vacuum System - Precondenser
DOC. NO. 06049D-CD-06-J0251 REV. B
1 SIZE : ID x L TYPE : Horiz. Connected in PARALLEL SERIES
2 SURFACE / UNIT : (Gro.)/(Eff.) m2 / SHELL / UNIT : SURFACE / SHELL : (Gro.)/(Eff.) m2 /
3 PERFORMANCE OF ONE UNIT
4 Fluid Allocation SHELL SIDE TUBE SIDE
5 Fluid Name HC / Water / Air Cooling Water
ation contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

6 Fluid Quantity, Total kg/hr 1746 X 1.4 (1)

7 INLET OUTLET INLET OUTLET
8 Vapor kg/hr 849 X 1.4
9 Liquid kg/hr
10 Steam kg/hr 858 X 1.4
11 Water kg/hr
12 Noncondensable kg/hr 39 X 1.4
13 Temperature ℃ 65 35 Max. 43
14 Density, L/V kg/m3
15 Viscosity, L/V cP
16 Molecular Weight, L/V
17 M.W, Noncondensable
18 Specific Heat, L/V kcal/kg℃
19 Thermal Cond., L/V kcal/hrm℃
20 Latent Heat kcal/kg See Note (2)
21 Inlet Pressure kg/cm2G 100 mmHg abs 4.0
22 Velocity m/sec
23 Press. Drop, Allow./Cal. kg/cm2 15 mmHg 0.7
24 Fouling Resistance hrm2℃/kcal 0.0006 0.0004
25 Heat Exchanged(Duty) : MM kcal/hr MTD (Corrected) ℃
26 Transfer Rate Service : kcal/hrm2℃ Clean : kcal/hrm2℃
27 CONSTRUCTION OF ONE SHELL
28 SHELL SIDE TUBE SIDE Sketch (Bundle/Nozzle Orientation)
29 Design/Test Press. kg/cm2G 3.5/F.V 8.5/F.V
30 Design Temp. ℃ 204 / 204 204 / 204
31 No. of Passes
32 Corrosion Allow. mm 3 3
33 Connections In
34 Size & Rating(ANSI Out
35 Interm. Layout to flow : °
36 Tubes No. OD mm Thick Min Avg mm Length mm Pitch mm
37 Tube : SA 179 Seamless Welded Tube .Tubesheet Joint B
38 Shell : SA516 Gr. 70 ID OD mm Shell Cover SA 516 Gr. 70 Integral Removable
39 Channel : SA 516 Gr. 70 Channel Cover SA 516 Gr. 70
40 Tubesheet.Stationary SA516 Gr. 70 (3) Tubesheet. Floating
41 Floating Head Cover Impingement Protection
42 Baffles.Cross Type : % CUT Diam. Area Spacing c/c mm No.
43 Baffles.Long Seal Type Bypass Seal Type No.
44 Expansion Joint Type Avg. Metal Temp. Shell ℃ Tube ℃
45 ρυ²inlet nozzle Bundle Entrance Shell Entrance
46 Gaskets.Shell side Tube Side Floating Head
47 Code Requirements. ASME.Sec. VIII Stamp Yes No TEMA Class :
48 Weights/Shell.Shipping kg Filled with water kg Bundle kg Insulation mm
49 NOTE (1) Flows are 140% of Normal for Case "100N EOR."
50 (2) See page 8~12 for heat curves. Transport properties in two liquid phase region are for non-aqueous phase.
51 (3) See Note 1 on page 4.

566801442.xls
This datasheet and information contained therein 52 (4) Tropicalization is required.
53
54
55 REVISION LOG
56 REVISION ISSUE STATUS DATE PRP'D BY CHK'D BY APP'D BY
57 A ISSUE FOR APPROVAL Aug.07 '06 I.K.Shin UCH/YNJ C.S.Koh
58 B REVISED AS MARKED Mar. 13 '07 U.C.Hwang Y.N.Joo J.H.Rha
59
60

566801442.xls
 PAGE 4 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 - E2 Q'TY One
S&T HEAT EXCHANGER SERVICE Vacuum System - Intercondenser
DOC. NO. 06049D-CD-06-J0251 REV. B
1 SIZE : ID x L TYPE : Horiz. Connected in PARALLEL SERIES
2 SURFACE / UNIT : (Gro.)/(Eff.) m2 / SHELL / UNIT : SURFACE / SHELL : (Gro.)/(Eff.) m2 /
3 PERFORMANCE OF ONE UNIT
4 Fluid Allocation SHELL SIDE TUBE SIDE
5 Fluid Name HC / Water / Air Cooling Water
ation contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

6 Fluid Quantity, Total kg/hr

7 INLET OUTLET INLET OUTLET
8 Vapor kg/hr
9 Liquid kg/hr
10 Steam kg/hr
11 Water kg/hr
12 Noncondensable kg/hr
13 Temperature ℃ 35 Max. 43
14 Density, L/V kg/m3
15 Viscosity, L/V cP
16 Molecular Weight, L/V
17 M.W, Noncondensable
18 Specific Heat, L/V kcal/kg℃
19 Thermal Cond., L/V kcal/hrm℃
20 Latent Heat kcal/kg
21 Inlet Pressure kg/cm2G 4.0
22 Velocity m/sec
23 Press. Drop, Allow./Cal. kg/cm2 0.7
24 Fouling Resistance hrm2℃/kcal 0.0006 0.0004
25 Heat Exchanged(Duty) : MM kcal/hr MTD (Corrected) ℃
26 Transfer Rate Service : kcal/hrm2℃ Clean : kcal/hrm2℃
27 CONSTRUCTION OF ONE SHELL
28 SHELL SIDE TUBE SIDE Sketch (Bundle/Nozzle Orientation)
29 Design/Test Press. kg/cm2G 3.5/F.V 8.5/F.V
30 Design Temp. ℃ 204 / 204 204 / 204
31 No. of Passes
32 Corrosion Allow. mm 3 3
33 Connections In
34 Size & Rating(ANSI Out
35 Interm. Layout to flow : °
36 Tubes No. OD mm Thick Min Avg mm Length mm Pitch mm
37 Tube : SA 179 Seamless Welded Tube .Tubesheet Joint B
38 Shell : SA516 Gr. 70 ID OD mm Shell Cover SA 516 Gr. 70 Integral Removable
39 Channel : SA516 Gr. 70 Channel Cover SA 516 Gr. 70
40 Tubesheet.Stationary SA516 Gr. 70 (1) Tubesheet. Floating
41 Floating Head Cover Impingement Protection
42 Baffles.Cross Type : % CUT Diam. Area Spacing c/c mm No.
43 Baffles.Long Seal Type Bypass Seal Type No.
44 Expansion Joint Type Avg. Metal Temp. Shell ℃ Tube ℃
45 ρυ²inlet nozzle Bundle Entrance Shell Entrance
46 Gaskets.Shell side Tube Side Floating Head
47 Code Requirements. ASME.Sec. VIII Stamp Yes No TEMA Class :
48 Weights/Shell.Shipping kg Filled with water kg Bundle kg Insulation mm
49 NOTE (1) If a fixed tubesheet is used, design for the thermal expansion due to max. difference between shell side (204℃)
50 and tube side (21℃)
51 (2) Tropicalization is required.

566801442.xls
This datasheet and information contained therein 52
53
54
55 REVISION LOG
56 REVISION ISSUE STATUS DATE PRP'D BY CHK'D BY APP'D BY
57 A ISSUE FOR APPROVAL Aug.07 '06 I.K.Shin UCH/YNJ C.S.Koh
58 B REVISED AS MARKED Mar. 13 '07 U.C.Hwang Y.N.Joo J.H.Rha
59
60

566801442.xls
 PAGE 5 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD -J0251 - E3 Q'TY One
S&T HEAT EXCHANGER SERVICE Vacuum System - Aftercondenser
DOC. NO. 06049D-CD-06-J0251 REV. B
1 SIZE : ID x L TYPE : Horiz. Connected in PARALLEL SERIES
2 SURFACE / UNIT : (Gro.)/(Eff.) m2 / SHELL / UNIT : SURFACE / SHELL : (Gro.)/(Eff.) m2 /
3 PERFORMANCE OF ONE UNIT
4 Fluid Allocation SHELL SIDE TUBE SIDE
5 Fluid Name HC / Water / Air Cooling Water
ation contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

6 Fluid Quantity, Total kg/hr

7 INLET OUTLET INLET OUTLET
8 Vapor kg/hr
9 Liquid kg/hr
10 Steam kg/hr
11 Water kg/hr
12 Noncondensable kg/hr
13 Temperature ℃ 43 35 Max. 43
14 Density, L/V kg/m3
15 Viscosity, L/V cP
16 Molecular Weight, L/V
17 M.W, Noncondensable
18 Specific Heat, L/V kcal/kg℃
19 Thermal Cond., L/V kcal/hrm℃
20 Latent Heat kcal/kg
21 Inlet Pressure kg/cm2G 4.0
22 Velocity m/sec
23 Press. Drop, Allow./Cal. kg/cm2 0.7
24 Fouling Resistance hrm2℃/kcal 0.0006 0.0004
25 Heat Exchanged(Duty) : MM kcal/hr MTD (Corrected) ℃
26 Transfer Rate Service : kcal/hrm2℃ Clean : kcal/hrm2℃
27 CONSTRUCTION OF ONE SHELL
28 SHELL SIDE TUBE SIDE Sketch (Bundle/Nozzle Orientation)
29 Design/Test Press. kg/cm2G 3.5/F.V 8.5/F.V
30 Design Temp. ℃ 204 / 204 204 / 204
31 No. of Passes
32 Corrosion Allow. mm 3 3
33 Connections In
34 Size & Rating(ANSI Out
35 Interm. Layout to flow : °
36 Tubes No. OD mm Thick Min Avg mm Length mm Pitch mm
37 Tube : SA 179 Seamless Welded Tube .Tubesheet Joint B
38 Shell : SA516 Gr. 70 ID OD mm Shell Cover SA 516 Gr. 70 Integral Removable
39 Channel : SA516 Gr. 70 Channel Cover SA 516 Gr. 70
40 Tubesheet.Stationary SA516 Gr. 70 (1) Tubesheet. Floating
41 Floating Head Cover Impingement Protection
42 Baffles.Cross Type : % CUT Diam. Area Spacing c/c mm No.
43 Baffles.Long Seal Type Bypass Seal Type No.
44 Expansion Joint Type Avg. Metal Temp. Shell ℃ Tube ℃
45 ρυ²inlet nozzle Bundle Entrance Shell Entrance
46 Gaskets.Shell side Tube Side Floating Head
47 Code Requirements. ASME.Sec. VIII Stamp Yes No TEMA Class :
48 Weights/Shell.Shipping kg Filled with water kg Bundle kg Insulation mm
49 NOTE (1) See Note 1 on page 4.
50 (2) Tropicalization is required.
51

566801442.xls
This datasheet and information contained therein 52
53
54
55 REVISION LOG
56 REVISION ISSUE STATUS DATE PRP'D BY CHK'D BY APP'D BY
57 A ISSUE FOR APPROVAL Aug.07 '06 I.K.Shin UCH/YNJ C.S.Koh
58 B REVISED AS MARKED Mar. 13 '07 U.C.Hwang Y.N.Joo J.H.Rha
59
60

566801442.xls
 PAGE 6 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
VACUUM SYSTEM SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1
2 1.0 Scope of Supply
3
4 1.1 The Vacuum system shall be a skid-mounted and piped unit consisting of the following:
5
6 - One precondenser (CD-J0251-E1) (NOT SKID-MOUNTED). Vendor to confirm economics of including a
tion contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7 precondenser.
8
9 - Two first stage steam ejectors (CD-J0251-J1A and CD-J0251-J1B) in parallel designed for 1/3 (J1A)
10 and 2/3 (J1B) of the load.
11
12 - One first stage Intercondenser (CD-J0251-E2)
13
14 - Two second stage steam ejectors (CD-J0251-J2A and CD-J0251-J2B) in parallel, each design for 100%
15 of the load.
16
17 - One second stage aftercondenser (CD-J0251-E3)
18
19 1.2 The vendor package shall include all interconnecting piping and instrumentation.
20 Cooling water piping is by Owner.
21
22 1.3 The vendor package shall include isolating valves for process inlet, steam inlet and steam/precess outlet
23 of each ejector.
24
25 1.4 The vendor shall provide a recirculation loop with a control valve to control the suction pressure
26 of the system.
27
28 1.5 The vendor shall provide and guarantee steam consumption rate.
29
30 1.6 The flow rates noted on the ejector data sheet are for the percondenser. Vendor to determine actual
31 flow rates to ejector based on precondenser selection.
32
33 2.0 The following referance specifications are application to this unit:
34
35 SP-46810 Ejector Systems
36 ESS-40210 Shall and Tube Exchanger
37 Piping Spec 9902
38 ESS-70030 Instrumentation for packaged Unit
39 ESS-82110 Painting
40 ESS-90100 Equipment Noise Level
41
42 3.0 Data for precondenser and ejectors shown for 100N EOR(page 2,3) conditions.
43
44
45
46
47
48
49
50
51

566801442.xls
 This datasheet and information contained therein

60
59
58
57
56
55
54
53
52

566801442.xls
 PAGE 7 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
VACUUM SYSTEM SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1
2
3
4
5
6
tion contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7
8
9
10
11
12
13
14
VACUUM SYSTEM PACKAGE
15
MP STEAM
16
17
18
19 CD-J0251-J1A CD-J0251-J2A
1ST STAGE 2ND STAGE
20 EJECTOR EJECTOR

21
VACUUM TOWER OVERHEAD
22 CD-J0251-J1B CD-J0251-J2B
1ST STAGE 2ND STAGE
23 EJECTOR EJECTOR

24 CWR

25
26 FORM PIC AT VAC
TOWER OVERHEAD
27
28 CWR CWR
65°
C 100mm Hg Abs
29
30 PRECONDENSER 1ST STAGE AFTERCONDENSER
INTERCONDENSER
31
CD-J0251-E1 CD-J0251-E2 CD-J0251-E3
32
CWS CWS CWS
33
* 45℃
45°
C 921mm Hg Abs
34 B
35 *

36 *
37 * TO VACUUM TOWER OVERHEAD DRUM CD-D0253

38
39
40
41
42
43
44
45
46
47
48
49
50
51

566801442.xls
 This datasheet and information contained therein

60
59
58
57
56
55
54
53
52

566801442.xls
 PAGE 8 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
VACUUM SYSTEM SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1
2
3
Heating Curve CD-J0251.HCURVE(0) Summary
4
Liquid Vapour
5 Number Temperature Pressure Enthalpy Liq Frac Latent Ht Density Density
6 C KG/CM2G M*KCAL/HR WT KCAL/KG KG/M3 KG/M3
tion contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7 1 65.0000 -0.8973 0.6348 0.0000 N/A 750.6094 0.1474

8 2 61.6667 -0.8973 0.6322 0.0004 74.7503 742.6334 0.1489
3 58.3333 -0.8973 0.6294 0.0020 76.2271 735.8573 0.1502
9
4 55.0000 -0.8973 0.6264 0.0056 77.6159 730.8204 0.1513
10 5 51.6667 -0.8973 0.6229 0.0121 78.8715 726.6590 0.1521
11 6 48.4057 -0.8973 0.6190 0.0227 499.2902 723.2826 0.1523
12 7 48.3333 -0.8973 0.6060 0.0373 504.6979 795.8202 0.1535
13 8 45.0000 -0.8973 0.2779 0.4800 347.8842 873.6885 0.1967
14
15
16
Heating Curve CD-J0251.HCURVE(0) Summary
Liquid Vapour Liquid Vapour Liquid
17
Number Temperature Pressure Viscosity Viscosity Therm Cond Therm Cond Surface Tens
18
C KG/CM2G CP CP KCAL/HR-M-C KCAL/HR-M-C DYNE/CM
19 1 65.0000 -0.8973 1.2124 0.0097 0.0728 0.0177 23.5224
20 2 61.6667 -0.8973 1.0577 0.0096 0.0798 0.0175 23.2088
21 3 58.3333 -0.8973 0.9452 0.0095 0.0863 0.0173 22.9607
22 4 55.0000 -0.8973 0.8717 0.0094 0.0914 0.0171 22.7917
5 51.6667 -0.8973 0.8163 0.0093 0.0962 0.0169 22.6690
23
6 48.4057 -0.8973 0.7745 0.0092 0.1003 0.0168 22.5923
24
7 48.3333 -0.8973 0.5935 0.0092 0.1232 0.0167 60.1490
25 8 45.0000 -0.8973 0.5946 0.0088 0.1774 0.0158 65.9772
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51

566801442.xls
 This datasheet and information contained therein

60
59
58
57
56
55
54
53
52

566801442.xls
 PAGE 9 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
VACUUM SYSTEM SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1
2
3
Heating Curve CD-J0251.HCURVE(1) Summary
4
Liquid Vapour
5 Number Temperature Pressure Enthalpy Liq Frac Latent Ht Density Density
6 C KG/CM2G M*KCAL/HR WT KCAL/KG KG/M3 KG/M3
tion contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7 1 65.0000 -0.6254 0.2126 0.6354 290.4841 845.7423 0.6202

8 2 61.6667 -0.6254 0.1636 0.7281 262.1097 837.3699 0.6725
3 58.3333 -0.6254 0.1346 0.7850 237.2900 832.3572 0.7130
9
4 55.0000 -0.6254 0.1147 0.8245 215.1667 828.9333 0.7436
10
5 51.6667 -0.6254 0.0998 0.8541 195.9057 826.4659 0.7652
11 6 48.3333 -0.6254 0.0879 0.8774 179.6329 824.6841 0.7786
12 7 45.0000 -0.6254 0.0779 0.8962 166.2587 823.4576 0.7846
13
14
15 Heating Curve CD-J0251.HCURVE(1) Summary
16 Liquid Vapour Liquid Vapour Liquid
Number Temperature Pressure Viscosity Viscosity Therm Cond Therm Cond Surface Tens
17
C KG/CM2G CP CP KCAL/HR-M-C KCAL/HR-M-C DYNE/CM
18
1 65.0000 -0.6254 0.4316 0.0094 0.1624 0.0169 62.1912
19 2 61.6667 -0.6254 0.4514 0.0094 0.1575 0.0167 62.2199
20 3 58.3333 -0.6254 0.4727 0.0094 0.1548 0.0165 62.3621
21 4 55.0000 -0.6254 0.4959 0.0096 0.1530 0.0164 62.5556
22 5 51.6667 -0.6254 0.5210 0.0097 0.1518 0.0163 62.7780
6 48.3333 -0.6254 0.5484 0.0099 0.1510 0.0163 63.0207
23
7 45.0000 -0.6254 0.5784 0.0102 0.1505 0.0164 63.2807
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51

566801442.xls
 This datasheet and information contained therein

60
59
58
57
56
55
54
53
52

566801442.xls
 PAGE 10 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
VACUUM SYSTEM SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1
2
3
Heating Curve CD-J0251.HCURVE(2) Summary
4
Liquid Vapour
5 Number Temperature Pressure Enthalpy Liq Frac Latent Ht Density Density
6 C KG/CM2G M*KCAL/HR WT KCAL/KG KG/M3 KG/M3
tion contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7 1 65.0000 -0.3535 0.1215 0.8448 201.0846 817.8305 1.1992

8 2 61.6667 -0.3535 0.1083 0.8708 185.1304 815.8591 1.2228
3 58.3333 -0.3535 0.0976 0.8915 171.9534 814.5614 1.2349
9
4 55.0000 -0.3535 0.0884 0.9080 161.2987 813.8306 1.2368
10 5 51.6667 -0.3535 0.0804 0.9214 152.7876 813.5875 1.2302
11 6 48.3333 -0.3535 0.0732 0.9321 146.0030 813.7596 1.2171
12 7 45.0000 -0.3535 0.0666 0.9409 140.5541 814.2767 1.1992
13
14
15 Heating Curve CD-J0251.HCURVE(2) Summary
16 Liquid Vapour Liquid Vapour Liquid
Number Temperature Pressure Viscosity Viscosity Therm Cond Therm Cond Surface Tens
17
C KG/CM2G CP CP KCAL/HR-M-C KCAL/HR-M-C DYNE/CM
18
1 65.0000 -0.3535 0.4267 0.0100 0.1483 0.0173 60.7316
19 2 61.6667 -0.3535 0.4462 0.0102 0.1474 0.0173 60.9969
20 3 58.3333 -0.3535 0.4674 0.0105 0.1468 0.0173 61.2847
21 4 55.0000 -0.3535 0.4904 0.0108 0.1465 0.0174 61.5930
22 5 51.6667 -0.3535 0.5156 0.0111 0.1465 0.0175 61.9204
6 48.3333 -0.3535 0.5432 0.0115 0.1466 0.0177 62.2648
23
7 45.0000 -0.3535 0.5735 0.0119 0.1469 0.0179 62.6237
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51

566801442.xls
 This datasheet and information contained therein

60
59
58
57
56
55
54
53
52

566801442.xls
 PAGE 11 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
VACUUM SYSTEM SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1
2
3
Heating Curve CD-J0251.HCURVE(3) Summary
4
Liquid Vapour
5
Number Temperature Pressure Enthalpy Liq Frac Latent Ht Density Density
6 C KG/CM2G M*KCAL/HR WT KCAL/KG KG/M3 KG/M3
tion contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7 1 65.0000 -0.0816 0.1037 0.9024 166.7323 807.2593 1.6672

8 2 61.6667 -0.0816 0.0952 0.9170 157.9558 806.9644 1.6626
9 3 58.3333 -0.0816 0.0877 0.9286 150.9398 807.1317 1.6488
4 55.0000 -0.0816 0.0808 0.9380 145.2927 807.6783 1.6281
10
5 51.6667 -0.0816 0.0746 0.9455 140.6803 808.5285 1.6030
11
6 48.3333 -0.0816 0.0687 0.9517 136.8383 809.6162 1.5751
12 7 45.0000 -0.0816 0.0631 0.9567 133.5674 810.8862 1.5461
13
14
15 Heating Curve CD-J0251.HCURVE(3) Summary
16 Liquid Vapour Liquid Vapour Liquid
17 Number Temperature Pressure Viscosity Viscosity Therm Cond Therm Cond Surface Tens
C KG/CM2G CP CP KCAL/HR-M-C KCAL/HR-M-C DYNE/CM
18
1 65.0000 -0.0816 0.4238 0.0110 0.1439 0.0180 60.0686
19
2 61.6667 -0.0816 0.4434 0.0113 0.1438 0.0182 60.4149
20 3 58.3333 -0.0816 0.4648 0.0117 0.1439 0.0183 60.7802
21 4 55.0000 -0.0816 0.4881 0.0120 0.1442 0.0185 61.1613
22 5 51.6667 -0.0816 0.5135 0.0124 0.1446 0.0187 61.5548
23 6 48.3333 -0.0816 0.5413 0.0128 0.1451 0.0188 61.9573
7 45.0000 -0.0816 0.5718 0.0132 0.1457 0.0190 62.3658
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51

566801442.xls
 This datasheet and information contained therein

60
59
58
57
56
55
54
53
52

566801442.xls
 PAGE 12 OF 12
PROJECT NO. 06049D
PROJECT NAME L - Project
ITEM NO. CD - J0251 Q'TY One
VACUUM SYSTEM SERVICE Vacuum System
DOC. NO. 06049D-CD-06-J0251 REV. B
1
2
3
Heating Curve CD-J0251.HCURVE(4) Summary
4
Liquid Vapour
5 Number Temperature Pressure Enthalpy Liq Frac Latent Ht Density Density
6 C KG/CM2G M*KCAL/HR WT KCAL/KG KG/M3 KG/M3
tion contained therein are the property of SK Engineering & Const. Co. Ltd (SKEC). They are merely loaned and shall not be disclosed to others or reproduced in any manner without written permission of SKEC.

7 1 65.0000 0.2189 0.0961 0.9314 151.5159 801.4409 2.0971

8 2 61.6667 0.2189 0.0894 0.9401 146.3759 802.1984 2.0705
9
3 58.3333 0.2189 0.0832 0.9472 142.1315 803.2410 2.0392
4 55.0000 0.2189 0.0774 0.9530 138.5510 804.5029 2.0053
10
5 51.6667 0.2189 0.0718 0.9577 135.4627 805.9311 1.9703
11 6 48.3333 0.2189 0.0665 0.9615 132.7415 807.4833 1.9354
12 7 45.0000 0.2189 0.0614 0.9648 130.2978 809.1264 1.9017
13
14
15 Heating Curve CD-J0251.HCURVE(4) Summary
16 Liquid Vapour Liquid Vapour Liquid
17
Number Temperature Pressure Viscosity Viscosity Therm Cond Therm Cond Surface Tens
C KG/CM2G CP CP KCAL/HR-M-C KCAL/HR-M-C DYNE/CM
18
1 65.0000 0.2189 0.4222 0.0120 0.1416 0.0189 59.6762
19 2 61.6667 0.2189 0.4419 0.0124 0.1420 0.0191 60.0832
20 3 58.3333 0.2189 0.4635 0.0128 0.1425 0.0193 60.5016
21 4 55.0000 0.2189 0.4869 0.0132 0.1430 0.0194 60.9278
22 5 51.6667 0.2189 0.5125 0.0135 0.1436 0.0196 61.3590
23
6 48.3333 0.2189 0.5404 0.0139 0.1443 0.0198 61.7927
7 45.0000 0.2189 0.5710 0.0142 0.1450 0.0199 62.2267
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51

566801442.xls
 This datasheet and information contained therein

60
59
58
57
56
55
54
53
52

566801442.xls