EVEREST TURBO

LET'S GO VALUE ENGINEERING

FISH FARM

SCIHJACUZZI
CLEANING
WATER SEWAGE TREATMENT
TREATMENT DENTAL VACUUM SYSTEMS

PARG & SPA 

AQUATIC BARREL COATING DRYING MEDICAL
LABORATORY  ELECTROPLATING AQUAPONICS

SIDE CHANNEL
FISH TANK AERATION  AQUACULTURE 
HYDROPONICS
SHRIMP FARMING
MANUFACTURING 

VACUUM CONVEYING
BLOWERS
AIR KNIFE BLOWING
ELECTRONICS
RECOVERY
FOOD

FOOD PACKAGING PRESSURE CONVEYING 

ENERGY
BIO GAS

ELECTROPLATING
METALWORK AGRICULTURE WATER TREATMENT
AUTOMOTIVE CHEMICAL & CONSTRUCTION
VENTING PHARMACEUTICAL AQUATIC
DEHUMIDIFICATION GLASS
MEDICAL
VAPOUR
RECOVERY

EVEREST TURBO, a division Of EVEREST BLOWERS Pvt. Ltd. proudly presents

EVEREST SIDE CHANNEL / REGENERATIVE Blower Technology:

Everest Side Channel Blowers, also known as Regenerative Blowers / Vortex Blowers / Ring Blowers / Turbine
Blowers, are designed for all areas where pulsation-free vacuum and pressure services are required. Units may
be installed horizontally or vertically. The die-cast Aluminium construction makes this a very robust product.
Sealed-for-life bearings, a fan-cooled drive and a non-contact impeller all ensure that the Everest Side Channel
Blowers are maintenance-free. Everest Side Channel Blowers are exceptionally environment-friendly, as they
require no operating fluids. An internal silencer allows the Everest Side Channel Blowers to run very quietly,
whilst the drive has energy-efficient motors. Special Anti-Corrosion blowers for highly corrosive environments &
Anti-Explosion blowers for highly explosive environments are also available.

The Salient Features Of EVEREST SIDE CHANNEL BLOWERS are:

100% Oil Free and Dry Quality Air, safe for critical applications. First choice in many automation projects for
applications requiring Low & Medium volumes of clean, dry air at low pressures and vacuum.
Bottom Mounting Base Design to reduce Vibration & Noise. Low noise operation (64-88db(A)) with small
footprint (compact) & virtually maintenance free design. Low vibration.
Constructed from Die Cast Aluminium Alloy. All our blowers are extremely robust, corrosion resistant and are
suitable for the most demanding applications.
Available in single/three phase configuration & single/double/triple stage design.
Designed for continual use up to a maximum ambient temp of 45°C - 50°C.
Equipped with a low-noise, high-efficiency, Class F, IE2/IE3 Induction Motors (50/60 Hz Dual Frequency)
Direct Driven: maximize energy efficiency by eliminating gears or transmission box losses.
Zero maintenance cost: Our blowers do not use gearboxes and oil lubricants used by conventional blowers,
minimizing maintenance requirements, lowering user maintenance costs and improving overall system
stability, Direct Driven, hence maximize energy efficiency. In addition, by adopting air-cooled cooling, there is
no need for cooling water circulation and associated maintenance cost.
Everest Turbo Side Channel Blowers suitable for vertical and horizontal operation. Full ATEX range available.
EVEREST TURBO
LET'S GO VALUE ENGINEERING

FISH FARM

SCIHJACUZZI
CLEANING
WATER SEWAGE TREATMENT
TREATMENT DENTAL VACUUM SYSTEMS

PARG & SPA 

AQUATIC BARREL COATING DRYING MEDICAL
LABORATORY  ELECTROPLATING AQUAPONICS

SIDE CHANNEL
FISH TANK AERATION  AQUACULTURE 
HYDROPONICS
SHRIMP FARMING
MANUFACTURING 

VACUUM CONVEYING
BLOWERS
AIR KNIFE BLOWING
ELECTRONICS
RECOVERY
FOOD

FOOD PACKAGING PRESSURE CONVEYING 

ENERGY
BIO GAS

ELECTROPLATING
METALWORK AGRICULTURE WATER TREATMENT
AUTOMOTIVE CHEMICAL & CONSTRUCTION
VENTING PHARMACEUTICAL AQUATIC
DEHUMIDIFICATION GLASS
MEDICAL
VAPOUR
RECOVERY

OPTIONAL ACCESSORIES:       
Inlet Vacuum/Pressure Filters with Silencing options
Safety Relief Valve & Non-Return Valve
VFD option For Power Saving and Variation in Output based on Application Demand

APPLICATIONS:
Waste Water Treatment Plant, Sewage Treatment Plant, Effluent Treatment Plant, Central Vacuum Cleaning
System, Aquaculture (Fish/Shrimp Pond Aeration), Pneumatic Conveying, Vacuum Lifting & Clamping,
Packaging & Printing Equipment, Vacuum Holding, Milking, Industrial Vacuum Cleaners, Bag/Hopper/Bottle
Filling, Agitation of Electrolyte, Air Knife Drying, Dental Vacuum System, CNC Router, Biogas/Bio-Methane
Transfer, Vapour/Smoke/Fume Extraction, Jacuzzi/Spa, Pneumatic Tube, Plastic Auxiliary Machinery, Air
Strippers, Fluid Aeration, Blow-Off & Drying, Combustion Burners, Pick-n-Place Applications, Packing Machines,
Swimming Pool Equipment.

APPLICATION SOLUTIONS: EVEREST TURBO AS A POLICY IS AN APPLICATION CENTRIC COMPANY

PROVIDING PRODUCT PLUS PACKAGE. FOR EVERY INDUSTRY THAT WE ADDRESS WE CAN DESIGN THE
BLOWER APPLICATION ACCESSORIES & SUPPLY AS A PACKAGE.

INDUSTRIES WE SERVE:
Sewage/ Water/ Effluent Treatment Plants Bottling Industry Timber Industry
Aquaculture (Fish & Shrimp) Pharmaceutical Industries Environmental Engineering
Hospital & Laboratory Equipment Paper Industry Electronics/Semi-Conductor
Plastic Industry Printing Industry Textile Industry
Rubber Industry Electroplating Industry Paper Industry
Food & Beverage Industry Glass Industry And Many More………………………..

FLOW RATES: Up to 2500 m3/hr (50/60 Hz)

MAXIMUM PRESSURE: 1040 mbar
MAXIMUM VACUUM: 740 mbar

Email: [email protected] www.everestblowers.com Call: +91- 7419990121

EVEREST TURBO
LET'S GO VALUE ENGINEERING

PAPER PACKAGING MACHINERY

ELECTROPLATING
HOT
BLAST AIR
PRINTING

GENERAL AIR SUPPLY

FILM BLOWING MACHINE
FAST DRYING FAST
AIR DRYING SYSTEMS
GRANULAR IMPURITIES
AIR SUPPLY FOR FOOD MACHINERY DRYING
UV PRINTING & DRYING VACUUM SUCTION EQUIPMENT DRAINAGE

CENTRIFUGAL
RAPID
FILM
COOLING
BLOWING
MACHINE CREMATION
BAG FILLING MACHINE POWDER GRANULE TRANSPORT MACHINE

BLOWERS
ULTRASONIC CLEANING

WOOD WORKING MACHINE

PLASTIC EXTRUSION MACHINE
PRINTING MACHINE
MECHANICAL COOLING
CONVEYING POWDER PLASTIC RAW MATERIAL DRYING
SMALL GAS NATURAL GAS COMBUSTION ENGINE
COMBUSTION HOT & COLD GAS PUMPING
ENGINE COMBUSTION
HEAT & COLD INCUBATOR
DRYING BROILER
PRINTING

EVEREST TURBO, a division Of EVEREST BLOWERS Pvt. Ltd. proudly presents

EVEREST ALUMINIUM DIECAST CENTRIFUGAL BLOWER Technology:

The Salient Features Of EVEREST TURBO Established characteristics are based on actual
Centrifugal Blowers are: tests instead of calculations, hence more
     accurate. This can help you determine the
Made from Die Cast Aluminium (ADC-12): High performance of your system/application in
strength Aluminium alloy for light weight, high advance.
volumes of clean, oil free, dry air at low pressure Zero maintenance cost: Our blowers do not use
and vacuum. gearboxes and oil lubricants used by
For the same power, the air flow is 10 times conventional blowers, minimizing maintenance
higher than Side Channel Blowers, however, requirements, lowering user maintenance costs
pressures are limited. and improving overall system stability. In
Adjustable outlets & motor position. addition, by adopting air-cooled cooling in the
Available in single/three phase configurations. entire model, there is no need for a cooling water
Have the added benefits of low noise operation. circulation system and associated maintenance
Virtually maintenance free.        cost.
Extremely robust, corrosion resistant and are Direct Driven Blowers, eliminating gears or
suitable for the most demanding applications. transmission boxes, hence maximize energy
Designed for continual use up to a maximum efficiency.
ambient temp of 45°C to 50°C. Everest Turbo Centrifugal Blowers are suitable for
Equipped with a low-noise, high-efficiency, class vertical and horizontal operation. 
F insulated IE2/IE3 induction Motors. Can be customized for High Temperature
No - oil operation, No vibration. Operation (Up to 200°C), Variable Inlet & Outlet
100% Oil Free and Dry quality Air, safe for critical Sizes, & Special Voltage Operation.
applications. Full ATEX range.
EVEREST TURBO
LET'S GO VALUE ENGINEERING

PAPER PACKAGING MACHINERY

ELECTROPLATING
HOT
BLAST AIR
PRINTING

GENERAL AIR SUPPLY

FILM BLOWING MACHINE
FAST DRYING FAST
AIR DRYING SYSTEMS
GRANULAR IMPURITIES
AIR SUPPLY FOR FOOD MACHINERY DRYING
UV PRINTING & DRYING VACUUM SUCTION EQUIPMENT DRAINAGE

CENTRIFUGAL
RAPID
FILM
COOLING
BLOWING
MACHINE CREMATION
BAG FILLING MACHINE POWDER GRANULE TRANSPORT MACHINE

BLOWERS
ULTRASONIC CLEANING

WOOD WORKING MACHINE

PLASTIC EXTRUSION MACHINE
PRINTING MACHINE
MECHANICAL COOLING
CONVEYING POWDER PLASTIC RAW MATERIAL DRYING
SMALL GAS NATURAL GAS COMBUSTION ENGINE
COMBUSTION HOT & COLD GAS PUMPING
ENGINE COMBUSTION
HEAT & COLD INCUBATOR
DRYING BROILER
PRINTING

APPLICATIONS: BLOWING OFF, SUCTION, HEATING, AERATION & VENTILATION, CONVEYING, COOLING,
DRYING, INCINERATORS, GENERATE NEGATIVE PRESSURE

INDUSTRIES WE SERVE:
PLASTICS INDUSTRY CLEANING & SURFACE TECHNOLOGY
WATER TECHNOLOGY RAIL TECHNOLOGY
FILLING & PACKAGING TECHNOLOGY DRYING TECHNOLOGY
AUTOMOTIVE INDUSTRY ENVIRONMENTAL TECHNOLOGY
PRINTING INDUSTRY PHARMACEUTICAL INDUSTRY
FILTER TECHNOLOGY AND MANY MORE...........
FOODSTUFF / LUXURY FOOD TECHNOLOGY

Email: [email protected] www.everestblowers.com Call: +91- 7419990121

EVEREST TURBO
LET'S GO VALUE ENGINEERING

CONDA AIR KNIFE

CONTAINER RINSING & DRYING 

TEXTILE DRYING AND BLOW OFF 
HIGH SPEED

DRYING
CENTRIFUGAL

 
BLOWERS
DUST DRYING
SPIDER ARM PHARMACEUTICAL
 

AIR KNIFE
 

AUTO PARTS CLEANING

DRYING WINE BOTTLE BEFORE LABELING LCD DISPLAY DESICCATION

AND
WIRE & CABLE DRYING AND BLOW OFF
CAN PRODUCTION LINE DRYING
INDUSTRIAL PRODUCT DRYING
ALUMINUM ALLOY AIR KNIFE 

AIR KNIFE
ELECTROPLATING SURFACE TREATMENT 
BOTTLE PRODUCTION LINE DRYING
INDUSTRIAL PRODUCTS CLEANING DRYING PCB CIRCUIT BOARD

SYSTEMS STAINLESS STEEL

PCB CIRCUIT BOARD

HIGH SPEED NOZZLE
  PACKAGING WIRE & CABLE DRYING
PROCESS AND BLOW OFF
DRYING
DIE CASTING COMPRESSED AIR
PARTS AIR KNIFE 

EVEREST TURBO, a division of EVEREST BLOWERS Pvt. Ltd. proudly presents

EVEREST HIGH SPEED CENTRIFUGAL BLOWER Technology:

Everest High-Speed Centrifugal Blowers & Air Knife Systems are the most professional Air Knife Drying
systems designed to meet specific application needs while maximizing energy efficiency and lowering
operating costs. The technology is derived from the world’s advanced design concepts and decades of
experience in blower industry.
 
Phoenix (Belt Driven) & Challenger (Direct Drive) Series are available with higher efficiencies, lower energy
consumption, longer service life, wider applicability and unparalleled control systems. A wide range of air
knives including Stainless steel air knives, Aluminium alloy air knives, Coanda effect air knives, Stainless-
steel high-speed nozzles, Spider air knives, Super air knives & Air wipes are also available for various drying &
blow off applications.
 
When coupled with a professionally designed air delivery device, centrifugal air blowers provide superior
blow off, drying or air rinsing, to improve product quality, while reducing energy usage by 50-80%. Because
of these energy savings, the return on investment (ROI) for an Everest High Speed Centrifugal Blower is
often about one year.
EVEREST TURBO
LET'S GO VALUE ENGINEERING

CONDA AIR KNIFE

CONTAINER RINSING & DRYING 

TEXTILE DRYING AND BLOW OFF 
HIGH SPEED

DRYING
CENTRIFUGAL

 
BLOWERS
DUST DRYING
SPIDER ARM PHARMACEUTICAL
 

AIR KNIFE
 

AUTO PARTS CLEANING

DRYING WINE BOTTLE BEFORE LABELING LCD DISPLAY DESICCATION

AND
WIRE & CABLE DRYING AND BLOW OFF
CAN PRODUCTION LINE DRYING
INDUSTRIAL PRODUCT DRYING
ALUMINUM ALLOY AIR KNIFE 

AIR KNIFE
ELECTROPLATING SURFACE TREATMENT 
BOTTLE PRODUCTION LINE DRYING
INDUSTRIAL PRODUCTS CLEANING DRYING PCB CIRCUIT BOARD

SYSTEMS STAINLESS STEEL

PCB CIRCUIT BOARD

HIGH SPEED NOZZLE
  PACKAGING WIRE & CABLE DRYING
PROCESS AND BLOW OFF
DRYING
DIE CASTING COMPRESSED AIR
PARTS AIR KNIFE 

The Salient Features of Everest Phoenix (Belt The Salient Features of Everest Challenger (Direct
Driven) Series High Speed Centrifugal Blowers Driven) Series High Speed Centrifugal Blowers, in
are: addition to most of the features of Phoenix Belt
Driven Blowers are: 
Oil Free Operation provides dry, clean, oil-free air.
Unlike compressed air systems, this is safe to cost Higher Efficiency (Up to 85%) – Under the same
effective, runs at low pressure, and allows for energy consumption & pressure the air flow of the
increased production speeds or levels. Challenger Series Bower is 30% more than other
Excellent driving structure: Impellers can reach high-speed centrifugal blowers.
speed of 13000 – 28400 RPM.
Anti-Corrosion Teflon Coating: Blower can work in Lower Energy Consumption – The Challenger-85
acidic and corrosive atmosphere. 7.5 kW can replace the Phoenix-100 11 kW. That
Fitted with ceramic hybrid bearings, flexible air means you can save more than 25000 kW per year. 
outlet, easy to remove steel bearing housing     
assembly, and zinc plated steel motor pulley. Longer Service Life – Challenger Series Blowers are
Lower energy consumption: Driven by IE2/IE3 directly driven, hence no belts, tensioners, etc are
motor, can improve power consumption by up to required. This results in greater stability with longer
50% compared with Side Channel Blower. service life.
Genuine SKF & NSK bearings applied to achieve
higher speed and greater reliability. Wider Applicability – The size & weight are only
Special fluid design, energy efficiency ratio can half of the belt driven high speed centrifugal
reach more than 70% (2 times higher than that of blower, resulting in smaller footprint, more
other high-pressure blowers).
convenient to install & transport. Available with
Large airflow and excellent power-saving ability
(improve 2-3 times production efficiency and save IE3/IE4 Brushless Magnetic High Efficiency Motor
more than 60% power). with bearing working temperatures up to 200°C.
EVEREST TURBO
LET'S GO VALUE ENGINEERING

CONDA AIR KNIFE

CONTAINER RINSING & DRYING 

TEXTILE DRYING AND BLOW OFF 
HIGH SPEED

DRYING
CENTRIFUGAL

 
BLOWERS
DUST DRYING
SPIDER ARM PHARMACEUTICAL
 

AIR KNIFE
 

AUTO PARTS CLEANING

DRYING WINE BOTTLE BEFORE LABELING LCD DISPLAY DESICCATION

AND
WIRE & CABLE DRYING AND BLOW OFF
CAN PRODUCTION LINE DRYING
INDUSTRIAL PRODUCT DRYING
ALUMINUM ALLOY AIR KNIFE 

AIR KNIFE
ELECTROPLATING SURFACE TREATMENT 
BOTTLE PRODUCTION LINE DRYING
INDUSTRIAL PRODUCTS CLEANING DRYING PCB CIRCUIT BOARD

SYSTEMS STAINLESS STEEL

PCB CIRCUIT BOARD

HIGH SPEED NOZZLE
  PACKAGING WIRE & CABLE DRYING
PROCESS AND BLOW OFF
DRYING
DIE CASTING COMPRESSED AIR
PARTS AIR KNIFE 

EVEREST TURBO offers Design and Application Engineering Solutions for Components/Product Drying
needs which are Critical to Productivity and Quality. EVEREST TURBO Offers Package Solutions comprising of
the High-Speed Centrifugal Blower along with Drying Systems. Air Knife Drying Systems are specially designed
for a complete air drying & blow off air system. It can be used for drying and blow off for a wide variety of
bottles, cans, and jars, auto components and so on.

EVEREST TURBO Air Knife Drying Systems are composed of many different components. It must be paired with
EVEREST TURBO High-Speed Centrifugal Blowers & Air Knives in order to deliver the necessary air velocity to
meet our customer’s needs. Save up to 60% of total energy consumption, when compared to compressed
air systems.

APPLICATIONS:
Everest High Speed Centrifugal Blowers and Air Knife Systems are widely used for Automobile spare parts
drying, Plastic parts drying, Lithium battery drying, Painting and drying, Food package drying, Electroplating
surface treatment, Drying beverage bottle before labelling, Wire & cable drying and blow off and many other
drying & blow off applications

INDUSTRIES WE SERVE:
AUTOMOBILE & ALLIED ANCILLARY PLANTS  
FOOD & BEVERAGE PLANTS
BOTTLING PLANTS
PHARMACEUTICAL INDUSTRY
ELECTRONIC INDUSTRY
AND MANY MORE, WHEREVER PRECISION DRYING SOLUTIONS ARE CRITICAL TO QUALITY.

Email: [email protected] www.everestblowers.com Call: +91- 7419990121

EVEREST TURBO
LET'S GO VALUE ENGINEERING

PNEUMATIC CONVEYING 

BLENDING PETROCHEMICALS
WASTE
WATER

PLATING BATH
OXYGEN PLATING
DISSOLUTION BATH

TURBO
ATOMIZATION FGD - FLUE GAS BACK WASHING
SAND BLASTING DESULFURIZATION DEHUMIDIFICATION

TURBO
AERATION FOR
INDUSTRIAL
AIR KNIFE - STEEL INDUSTRY
COMPOSTING FERMENTATION

BLOWERS
WASTEWATER AERATION FOR MUNICIPAL WASTEWATER TREATMENT

BLOWERS
TREATMENT SAND BLASTING

MECHANICAL CONVEYING SYSTEM

OXYGEN SUPPLY
AIR KNIFE BACK WASHING
STEEL
INDUSTRY
COOLING AIR - POWER PLANT GENERATOR

BACK WASHING
COMBUSTION AIR - BLENDING
POWER GENERATION PLANT PETROCHEMICALS
AERATION FOR INDUSTRIAL INCINERATORS
WASTEWATER
TREATMENT

EVEREST TURBO, a division of EVEREST BLOWERS PVT. LTD. proudly presents

EVEREST NAMWON TURBOONE Air Foil Bearing Turbo Blower Technology:

Turbo technology is the suggested method for The prevailing force couples are so high that they
achieving the highest efficiency in air compression keep the shaft permanently in the centre of the
up to 1 bar. When the first turbo blower was bearing, even in the case of considerably varying
manufactured, spectacular improvements were and challenging operating conditions — and thus
visible compared to the conventional rotary piston free-floating without surface contact. The brilliance
and screw compressors. Vast reduction in of this principle is the fact that in operation the air
necessary power, the sound pressure and cushion forms automatically — and thus without
maintenance schedule of the turbo blowers was further energy input.
observed. With the optimization of the techniques
used, we have perfected our series of Everest Turbo blowers are particularly suitable for processes
Namwon Turboone Turbo Blowers and simplified where long-term air compression between 0.3 and
them into a universal compact turnkey module. In 1.0 bar is required. In addition to energy targets, the
this process, we have engineered ease of use, total cost of ownership will prove that,
control, security and communication into an economically, Everest Turbo Blowers are by far the
extremely reliable machine. best solution. Everest has introduced this product
  under special cooperation with Namwon Turboone
Everest Turbo Blowers use Air as bearing system. who is a specialized manufacturer of Turbo Blowers
Air Foil Technology has evolved substantially since and has been researching, developing, producing &
the 1960s to become industry standard for military selling the highest performance products by
and commercial aviation.  Simple and reliable combining the best technology in each field such
these bearings are mechanical and do not require as air bearing, precision machined impeller, ultra-
complicated control systems or external power to high speed & high efficiency permanent magnet
operate. The shaft centres in the bearing itself and motor, high speed control inverter, automatic
increases the pressure in the air gap to more than control logic and system design.
30bar.
EVEREST TURBO
LET'S GO VALUE ENGINEERING

PNEUMATIC CONVEYING 

BLENDING PETROCHEMICALS
WASTE
WATER

PLATING BATH
OXYGEN PLATING
DISSOLUTION BATH

TURBO
ATOMIZATION FGD - FLUE GAS BACK WASHING
SAND BLASTING DESULFURIZATION DEHUMIDIFICATION

TURBO
AERATION FOR
INDUSTRIAL
AIR KNIFE - STEEL INDUSTRY
COMPOSTING FERMENTATION

BLOWERS
WASTEWATER AERATION FOR MUNICIPAL WASTEWATER TREATMENT

BLOWERS
TREATMENT SAND BLASTING

MECHANICAL CONVEYING SYSTEM

OXYGEN SUPPLY
AIR KNIFE BACK WASHING
STEEL
INDUSTRY
COOLING AIR - POWER PLANT GENERATOR

BACK WASHING
COMBUSTION AIR - BLENDING
POWER GENERATION PLANT PETROCHEMICALS
AERATION FOR INDUSTRIAL INCINERATORS
WASTEWATER
TREATMENT

The Salient Features of EVEREST NAMWON TURBOONE TURBO Blowers are:

Core Technology 1: Air Foil Bearing

Non-contact bearing supporting the load of the rotating body by using the force which is compressed by the
wedge effect around the shaft rotating at high speed. Requires no lubricant, 20 years maintenance free life,
simple system components & power loss under 0.5% with high speed motor.

Core Technology 2: Impeller & PMS Motor

Manufactured with state-of-the-art aerodynamic style technology ensuring high efficiency with the most
sophisticated design & precise processing. High durability due to use of high strength heat treated Aluminium
AL7075. High Efficiency, High Speed Permanent Magnet Motors are optimized for high speed rotation,
minimizing current loss and delivering maximum efficiency of 98%.

Core Technology 3: VFD & PLC

VFD (Inverter) which enables to start the motor with minimal starting current, thereby reducing electricity & cable
investment. Low noise, high performance soft start, digital control, over 96% efficiency, high stability, high
reliability and good response to sudden load changes. PLC (Programmable Logical Controllers) of internationally
renowned brands, and their automation solutions meet global quality standards,
providing users with solutions from control to final connection to load.

The Advantages of EVEREST NAMWON TURBOONE TURBO Blowers are:

Complete One-Stop System that does not allow for a single error.
Highly Efficient & Energy Saving: Air Bearing Turbo Blowers maximize energy efficiency by using air foil
bearings, direct connection technology, high efficiency impellers, and permanent magnet motors.
Low Noise: Due to combination of Turbo Technology and Air Foil Bearing Technology, the noise is low in the
entire area of the blower operation, so no additional sound proofing is required.
No-Oil Operation, No Vibration: By adopting air foil bearing, Everest Namwon Turboone Turbo Blower achieves
ISO 8573-1 Class 0 air quality & no vibration operation.
Low Maintenance Cost: Our blowers do not use gear boxes and oil lubricants used by conventional blowers,
minimizing maintenance requirements, lowering user maintenance costs and improving overall system
stability. In addition, by adopting air-cooled cooling in the entire model, there is no need for cooling water
circulation and its maintenance cost required for water cooling.
Compact Structure: The structure is simple, compact, lightweight, and easy to move & install.
Convenient Operation & Control: All information related to the operation of the blower, such as flow rate,
pressure, temperature and operating speed can be monitored and controlled by a central control system.
HMI (Human-Machine Interface): The touch-based HMI (Touch Panel) is easy to operate and provides all
information about the operation of the device and supports multiple languages.
EVEREST TURBO
LET'S GO VALUE ENGINEERING

PNEUMATIC CONVEYING 

BLENDING PETROCHEMICALS
WASTE
WATER

PLATING BATH
OXYGEN PLATING
DISSOLUTION BATH

TURBO
ATOMIZATION FGD - FLUE GAS BACK WASHING
SAND BLASTING DESULFURIZATION DEHUMIDIFICATION

TURBO
AERATION FOR
INDUSTRIAL
AIR KNIFE - STEEL INDUSTRY
COMPOSTING FERMENTATION

BLOWERS
WASTEWATER AERATION FOR MUNICIPAL WASTEWATER TREATMENT

BLOWERS
TREATMENT SAND BLASTING

MECHANICAL CONVEYING SYSTEM

OXYGEN SUPPLY
AIR KNIFE BACK WASHING
STEEL
INDUSTRY
COOLING AIR - POWER PLANT GENERATOR

BACK WASHING
COMBUSTION AIR - BLENDING
POWER GENERATION PLANT PETROCHEMICALS
AERATION FOR INDUSTRIAL INCINERATORS
WASTEWATER
TREATMENT

APPLICATIONS:
COMMON USES ARE AERATION, PNEUMATIC TRANSPORTATION OF BULK GOODS, AIR SUPPLY IN
COMBUSTION PROCESSES, AIR KNIFE DRYING, FLUE GAS DESULPHURIZATION, AND OXIDATION
PROCESSES

INDUSTRIES WE SERVE:
SEWAGE TREATMENT PLANTS
WATER TREATMENT PLANTS
EFFLUENT TREATMENT PLANTS
CHEMICAL INDUSTRIES
FOOD PROCESSING INDUSTRIES
AQUACULTURE MEGA FARMS
PAPER INDUSTRY
CEMENT INDUSTRY
AND MANY MORE...........

FLOW: 3 – 500 m³/min

PRESSURE: 3,000 – 10,000 mmWC
SHAFT POWER: 10 – 600 hp

Email: [email protected] www.everestblowers.com Call: +91- 7419990121