Scribd
Upload
81 views

Handson Technology: Arduino Pro Mini Controller Board

The Arduino Pro Mini is a small and low-cost Arduino board intended for advanced users who require flexibility and want to embed the board in a project. It has minimal components and no onboard USB to keep costs down. It is programmed using the Arduino IDE like other Arduino boards. An external USB-to-serial converter is needed to program it since it lacks onboard USB. It runs on 3.3V or 8V power and has an ATmega328P microcontroller running at 16MHz with external resonator.

Uploaded by

Gonzalv Chris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views

Handson Technology: Arduino Pro Mini Controller Board

The Arduino Pro Mini is a small and low-cost Arduino board intended for advanced users who require flexibility and want to embed the board in a project. It has minimal components and no onboard USB to keep costs down. It is programmed using the Arduino IDE like other Arduino boards. An external USB-to-serial converter is needed to program it since it lacks onboard USB. It runs on 3.3V or 8V power and has an ATmega328P microcontroller running at 16MHz with external resonator.

Uploaded by

Gonzalv Chris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Handson Technology

Datasheet

Arduino Pro Mini Controller Board


The Arduino Pro Mini is intended for advanced users who require flexibility, low-cost, and
small size. It comes with the minimum of components. No on-board USB to keep the cost
down. It's a good choice for a board you want to leave embedded in a project. The Arduino
Pro Mini is programmed using the Arduino Software (IDE), compatible with all Arduino
boards.

SKU: MDU1088

Brief Data:

 DC input 3.3V up to 8V (power supply from RAW pin)


 DC input 3.3V (from VCC pin)
 Boot loader: Arduino Pro/Pro Mini (3.3V, 8Mhz) w/ Atmega328
 3.3V regulator
 Max 150mA output
 ATmega328P running at 16MHz with external resonator (0.5% tolerance)
 Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS,
accelerometers, sensors, etc)
 Supports auto-reset
 Over current protected
 Reverse polarity protected
 On board Power and Status LEDs
 Board Dimension: 33x18 mm.

1 www.handsontec.com
Application Examples:
Arduino Pro Mini is without on-board USB interface, we need to use external USB-Serial Converter module
to do sketch uploading within Arduino IDE environment. Refer to below connection to Arduino Pro Mini
using external USB-Serial Converer type FT232RL.

Web Resources:
 https://handsontec.com/index.php/product/ft232r-usb-to-serialttl-converter-module/

2 www.handsontec.com
Handsontec. com

HandsOn Technology provides a multimedia and interactive platform for


everyone interested in electronics. From beginner to diehard, from student
to lecturer. Information, education, inspiration and entertainment. Analog
and digital, practical and theoretical; software and hardware.

HandsOn Technology support Open Source Hardware (OSHW)


Development Platform.

Learn : Design : Share


handsontec.com

3 www.handsontec.com
The Face behind our product quality…
In a world of constant change and continuous technological development, a new or replacement
product is never far away – and they all need to be tested.
Many vendors simply import and sell wihtout checks and this cannot be the ultimate interests of
anyone, particularly the customer. Every part sell on Handsotec is fully tested. So when buying from
Handsontec products range, you can be confident you’re getting outstanding quality and value.

We keep adding the new parts so that you can get rolling on your next project.

Breakout Boards & Modules Connectors Electro-Mechanical Parts

P
Engineering Material Mechanical Hardware Electronics Components

Power Supply Arduino Board & Shield Tools & Accessory

4 www.handsontec.com

You might also like