Constructions Revised

MEP Constructions for Buildings and Spaces
Contents
Ceiling:
8 in lightweight concrete ceiling
4 in reinforced-concrete ceiling
Carpeted 4 in reinforced-concrete ceiling
5 in reinforced-concrete ceiling (screeded)
5 in concrete ceiling
5 in concrete ceiling (screeded)
1/2 in plaster with TG boards on 16 in joist centers
Plaster, wood boards, glass wool on joists
2 in screed, 6 in cast concrete
Wood blocks, screed, 6 in concrete
Wood blocks, concrete, batting, gypsum
Wood blocks, concrete, batting, metal deck tray
Concrete slab internal
Timber-joist internal
Timber-joist internal - industry
2in heavyweight concrete with false ceiling
4 in heavyweight concrete with false ceiling
4 in lightweight concrete with false ceiling
8 in lightweight concrete with false ceiling
2 in wood deck with false ceiling
3in wood deck with false ceiling
4 in wood deck with false ceiling
Steel deck with false ceiling
Ceiling below joists, no insulation
Ceiling below joists, R-2 board insulation
Ceiling below joists, R-11 blanket or loose fill
Exposed beams, 1 1/2 in wood, no insulation
Exposed beams, 1 1/2 in wood plus R-2 insulation
Exposed beams, 2 in cement-fiber slab, no insulation
Exposed beams, 3 in cement-fiber slab, no insulation
Exposed beams, 1 1/2 in wood plus R-17 to R-18 insulation
Wood block, concrete, plasterboard
ExteriorWall:
Standard wall construction - A
Standard wall construction - B
Standard wall construction - C
Brick / block wall
Timber-frame wall
Lightweight curtain wall
Metal-clad wall
Brick / block wall
Brick / block wall
Timber-frame wall
Brick / block wall
Lightweight concrete-clad wall
Brickwork single-leaf construction dense plaster
Brickwork single-leaf construction light plaster
Un-insulated brick/block wall
Super-insulated external wall
Sheet steel
Sheet aluminum
Brickwork single-leaf construction with insulation and plaster
Brickwork single-leaf construction fiber insulation and render
Brickwork single-leaf construction EPS insulation and render
Lightweight concrete block air gap and plasterboard
Lightweight concrete block GRP insulation and plasterboard
Lightweight concrete block poly-insulation and plasterboard
Brick cavity with dense plaster
Brick cavity with mineral insulation and lightweight plaster
Brick cavity full mineral insulation and lightweight plaster
Brick cavity with UF foam insulation and lightweight plaster
Brick, heavy concrete block, phenolic foam, light plaster
Brick, heavy concrete block, mineral insulation, light plaster
Brick, medium concrete block, foam insulation, light plaster
Brick, light concrete block, foam insulation, light plaster
Brick, light concrete block, light plaster
Brick, foam insulation, light concrete block, light plaster
Brick, mineral insulation, light concrete block, light plaster
Face brick, insulation, light concrete block
4in lightweight concrete
4 in face brick, 8 in common brick
4 in face brick, 8 in heavyweight concrete block
4 in face brick, 8 in lightweight concrete block
4 in face brick air space and 8 in clay tile
4 in face brick air space and 2 in heavyweight concrete
4 in face brick air space and 4 in common brick
4 in face brick air space and 4 in heavyweight concrete block
4 in face brick air space and 4 in lightweight concrete block
12 in heavyweight concrete
8 in heavyweight concrete with 2 in insulation
8 in heavyweight concrete with air space
4 in face brick 8 in common brick with 1 in insulation
4 in face brick 8 in common brick with air space
4 in face brick air space and 4 in lightweight block
Wall with 3 in fiberglass insulation and stucco outside finish
Two-sided brick wall with air space
Brick wall 8 in concrete block and no air space
Brick wall with 4 in concrete block
Brick wall with 8 in concrete block
Brick wall with 6 in concrete
Frame wall with 2 in insulation and 4 in brick veneer
Frame wall with 2 in insulation
Metal curtain wall with 3 in insulation
Wall 12 in concrete with 2 in insulation on the outside
Wall 12 in concrete with 2 in insulation on the inside
Frame wall without insulation
2 in insulation with 12 in heavyweight concrete
2 in insulation with 8 in common brick
2 in insulation with 8 in heavyweight concrete block
2 in insulation with 8 in lightweight concrete block
2 in insulation with 8 in clay tile
2 in insulation with 4 in heavyweight concrete block
4 in face brick, 2 in insulation, 12 in heavy concrete
4 in face brick, 2 in insulation, 8 in heavy concrete
4 in face brick 2 in insulation and 8 in common brick
4 in face brick, 2 in insulation, 8 in heavy concrete block
4 in face brick, 2 in insulation, 8 in light concrete block
2 in face brick 2 in insulation and 8 in clay tile
4 in face brick 2 in insulation and 4 in heavyweight concrete
4 in face brick 2 in insulation and 4 in common brick
4 in face brick, 2 in insulation, 4 in heavy concrete block
4 in face brick with 8 in common brick
8 in heavyweight concrete block with 1 in insulation
8 in heavyweight concrete block
8 in lightweight concrete block with insulation
8 in lightweight concrete block
4 in face brick 8 in clay tile and 1 in insulation
4 in face brick 8 in clay tile and air space
4 in face brick with 8 in clay tile
8 in clay tile with 1 in Insulation
8 in clay tile with air space
8 in clay tile
4 in heavyweight concrete with air space
4 in face brick 4 in common brick and 1 in insulation
4 in face brick 4 in common brick and air space
4 in face brick with 4 in common brick
4 in common brick
4 in face brick, 4 in light concrete block, 1 in insulation
4 in face brick 4 in lightweight concrete block and air space
4 in face brick with 4 in lightweight concrete block
4 in lightweight concrete block and 1 in insulation
4 in lightweight concrete block and air space
4 in face brick 4 in clay tile and 1 in insulation
4 in face brick 4 in clay tile and air space
4 in face brick and 4 in clay tile
4 in clay tile and 1 in insulation
4 in clay tile and air space
4 in clay tile
Sheet metal with 1 in insulation
4 in face brick
4 in face brick
4 in face brick
4 in face brick
4 in face brick
4 in face brick with 2 in insulation
Spandrel glass, R-10 insulation board, gyp board
Metal wall panel, R-10 insulation board, gyp board
Metal wall panel, sheathing, R-11 batt insulation, gyp board
1 in stone, R-10 insulation board, gyp board
1 in stone, sheathing, R-11 batt insulation, gyp board
1 in stucco, sheathing, R-11 batt insulation, gyp board
1 in stucco, 8 in heavyweight CMU, R-11 batt insulation, gyp board
Wood siding, sheathing, batt insulation, 1/2 in wood
EIFS finish, R-5 insulation board, sheathing, gyp board
Synthetic stucco, R-5 plus R-11 insulation, gypsum board
Synthetic stucco, insulation, sheathing, light concrete, gypsum
Synthetic stucco, insulation, concrete, gypsum
Synthetic stucco, insulation board, light concrete, gypsum
Brick, R-5 insulation board, sheathing, gypsum
Brick, sheathing, R-11 batt insulation, gypsum
Brick, R-5 plus R-11 insulation with sheathing, gypsum
Brick, R-5 insulation board, 8 in light-weight concrete block
Brick, 8 in lightweight CMU, R-11 batt insulation, gyp board
Brick, R-5 insulation board, 8 in heavyweight CMU, gyp board
Brick, R-5 insulation board, brick
Brick, R-5 insulation board, 8 in lightweight concrete, gyp board
Brick, R-5 insulation board, 12 in heavyweight concrete, gyp board
Brick, 8 in heavyweight concrete, R-11 batt insulation, gyp board
4 in lightweight concrete, R-5 board insulation, gyp board
4 in lightweight concrete, R-11 batt insulation, gyp board
4 in lightweight concrete, R-10 board insulation, 4 in lightweight concrete
8 in lightweight CMU, R-11 batt insulation, gyp board
8 in concrete block, filled, R-11 insulation, gypsum
8 in lightweight CMU with fill insulation
8 in lightweight CMU with fill insulation, gyp board
8 in lightweight concrete, R-11 batt insulation, gyp board
8 in heavyweight concrete, R-11 batt insulation, gyp board
12 in lightweight CMU with fill insulation, gyp board
12 in heavyweight concrete, R-19 batt insulation, gyp board
R-0 8 in CMU wall
R-20 8 in CMU wall
R-0 wood frame wall
R-11.4 8 in CMU wall
R-13 + R10 metal frame wall
R-13 + R13 metal frame wall
R-13 + R3.8 wood frame wall
R-13 + R7.5 wood frame wall
R-13.3 8 in concrete
R-5.7 8 in concrete
R7.6 8 in concrete
R9.5 8 in concrete
R-0 8 in CMU under ground wall
R7.5 8 in CMU under ground wall
R-19 wood frame wall
R-2.7 8 in CMU under ground wall
R-4 8 in CMU under ground wall
R8.1 8 in CMU under ground wall
R-19 8 in concrete
R-13+3.8 wood frame wall
R-13+7.5 wood frame wall
R-0 metal frame wall
R9 curtain wall
R-11 UG ex-wall
R-13 UG ex-wall
R-15 UG ex-wall
R-19 UG ex-wall
R-30 8 in concrete
8 in concrete wall with perlite filled cores
8 in concrete wall with poured cores
8 in concrete wall hollow
8 in CMU with concrete poured concrete
8 in CMU with perlite poured concrete
Straw bale wall
Insulated concrete form (ICF) wall, 10" thick form
Structurally ins. panel (SIP) wall 4 1/2 in (114 mm)
Structurally ins. panel (SIP) wall 6 1/2 in
R-2 CMU wall
R-13+R13 metal frame wall
R-15+R15 metal frame wall
R-13+3.8 metal frame wall
R-13+7.5 metal frame wall
R-3 8 in CMU wall
R-4 8 in CMU wall
R-6 8 in concrete block
2 ft stone, 2 in airspace, 1 in dense plaster
Stone, insulation, plasterboard
Render, no-fines concrete, plasterboard
Render, no-fines concrete, insulation, plasterboard
Render, mineral fiber insulation, no-fines concrete, plasterboard
9 in solid brick, 1/2 in dense plaster
9 in solid brick, 1/2 in plasterboard
9 in solid brick, mineral fiber insulation, plasterboard
Render, insulation, solid brick, dense plaster
Render, dense concrete block, dense plaster
Render, dense concrete block, plasterboard
Render, dense concrete block, insulation, plasterboard
Render, insulation, dense concrete block, dense plaster
Dense concrete, 1 in insulation, dense concrete, dense plaster
Dense concrete, 1 in insulation, dense concrete, plasterboard
Dense concrete, 2 in insulation, dense concrete, plasterboard
Render, dense concrete, insulation, dense concrete, dense plaster
Brick, air, brick, dense plaster
Brick, air, brick, light-weight plaster
Brick, foam insulation, brick, dense plaster
Brick, blown fiber insulation, brick, dense plaster
Brick, polystyrene insulation, brick, plasterboard
Brick, air, dense concrete block, dense plaster
Brick, foam insulation, dense concrete block, dense plaster
Brick, blown fiber insulation, dense concrete, dense plaster
Brick, polystyrene insulation, dense concrete, dense plaster
Brick, air, light-weight concrete block, dense plaster
Brick, foam insulation, light-weight concrete, dense plaster
Brick, fiber insulation, light-weight concrete, dense plaster
Brick, fiber insulation, light-weight concrete, dense plaster
Brick, polystyrene insulation, light-weight concrete, dense plaster
Brick, air, plywood sheathing, studding, plasterboard
1/2 in dense plaster, 8 in brick, 1/2 in dense plaster
1/2 in dense plaster, dense concrete block, 1/2 in dense plaster
Brick, polystyrene insulation, light-weight concrete, dense plaster
Brick, 4 in autoclaved aerated concrete block, light-weight plaster
Brick, 6 in autoclaved aerated concrete block, light-weight plaster
Brick, insulation, autoclaved aerated concrete block, plaster
Brick, plywood, studding, 4 in insulation, plasterboard
Brick, plywood, studding, 6 in insulation, plasterboard
Plasterboard, concrete block, air, concrete block, plasterboard
InteriorFloor:
Wilton carpet on concrete
Timber flooring, gypsum
Timber flooring, batting, gypsum
Timber flooring, batt, metal deck tray
Timber flooring, joists, plasterboard ceiling
Loft floor - domestic A
Loft floor - domestic B
2in heavyweight concrete floor deck
4 in heavyweight concrete floor deck
2 in lightweight concrete floor deck
8 in heavyweight concrete floor deck
2 in wood deck
3in wood deck
8 in lightweight concrete floor deck
Passive floor, no insulation, tile or vinyl
Passive floor, no insulation, carpet or hardwood
Passive floor, R-2 board insulation, any cover
Radiant floor, R-38 blanket insulation, any cover
Screed, concrete, dense plaster
Vinyl floor covering, screed, concrete
Carpet underlay, screed, concrete
Carpet, underlay, timber on joists, ventilated
Carpet, underlay, screed, concrete, insulation, building board
Vinyl, screed, concrete - A
Vinyl, screed, concrete - B
Vinyl, screed, insulation, concrete
Vinyl, timber, insulation, concrete
Vinyl, timber on joists, ventilated
Vinyl, timber on joists, building board - A
Vinyl, timber on joists, building board - B
Vinyl, screed, concrete, 2 in insulation, building board
Vinyl, screed, concrete, 4 in insulation, building board
InteriorWall:
Light plaster, brick, light plaster
Light plaster, double brick, light plaster
Light plaster, heavy concrete block, light plaster
Light plaster, medium concrete block, light plaster
Light plaster, light concrete block, light plaster
Standard double gypsum with 4 in air gap
Standard double fiberboard with 4 in air gap
4 in single-leaf brick (plastered both sides)
8 in single-leaf brick (plastered both sides)
1 1/4 ft single-leaf brick (plastered both sides)
Solid breeze blocks (plastered both sides)
4in single-leaf brick
5in single-leaf brickwork (plastered on one side)
Aerated concrete blocks
Hollow concrete blocks
Insulated concrete form
Glass blocks
4 in reinforced concrete
9 in medium-weight concrete block
1 1/2 ft dense concrete
Polystyrene faced with hardboard on plasterboard
Expanded-wood chipboard
Block cavity wall with air gap (plastered)
Cast concrete cavity wall with air gap (plastered)
Brick cavity wall with air gap
Brick cavity wall (plaster both sides)
Standard double plasterboard with insulation
3/8 in plasterboard on studs
1/2 in plasterboard on studs
1/2 in plasterboard on studs with mineral fiber slab
1/4 in plywood on studs
3/8 in plywood on studs
Asbestos wallboard on timber frame
Domestic solid party wall
Domestic lightweight party wall
Lightweight plasterboard partition
Solid partition
4in clay tile with plaster
Light-weight concrete block with plaster
Heavy-weight concrete block with plaster
4 in common brick with plaster
Heavyweight concrete with plaster
5in clay tile with plaster
Light-weight concrete block plastered
heavyweight concrete block plastered
8 in common brick with plaster
8 in heavy concrete with plaster
12 in heavy concrete with plaster
4 in clay tile
Light-weight concrete block
4 in common brick
8 in clay tile
8 in common brick
Frame partition with 3/4 in gypsum board
1 in wood
2in wood
3 in wood
4 in wood
Frame partition with 1 in wood
2 in furniture
3in furniture
Frame construction, wood sheathing, wood studs
Frame construction, wood sheathing, metal studs
Frame construction, R-2 board insulation, wood studs
Frame construction, R-2 board insulation, metal studs
Frame construction, R-11 insulation, wood studs
Frame construction, R-11 insulation, metal studs
Frame construction, R-11 plus R-2 insulation, wood studs
Frame construction, R-11 plus R-2 insulation, metal studs
Frame construction, R-11 and R-3 insulation, wood studs
Frame construction, R-15 insulation, wood sheathing, wood studs
Frame construction, R-15 insulation, wood sheathing, metal studs
Frame construction, R-21 insulation, wood sheathing, wood studs
Frame construction, R-21 insulation, wood sheathing, metal studs
Siding, R-2 insulation, interior finish
Siding, R-2 insulation, filled core, interior finish
Siding, R-6 insulation, filled core, plus interior finish
Block, interior/exterior finish, R-11 plus R-2 insulation
Block, interior/exterior finish, R-11 plus R-2 insulation, filled
Light-weight plaster, brick, light-weight plaster
Light-weight plaster, concrete block, light-weight plaster
Plasterboard, timber studding, plasterboard
NonSlidingDoor:
Wooden
Metal
Timber flush-panel hollow-core
Solid hardwood
Hollow core wood
Door - wood - hollow core - wood storm
Hollow core wood, metal storm
Solid core wood
Solid core wood, wood storm
Solid core wood, metal storm
Wood panel
Wood panel with wood storm
Wood panel, metal storm
Metal, fiberglass core
Metal, fiberglass core, storm
Wood frame with single clear glass
Metal frame with single clear glass
Wood frame, single glass door, glass storm
Metal frame, single glass door, glass storm
Wood frame, double glass door
Metal frame, double glass door
Wood frame, double/triple glass, glass storm
Metal frame, double/triple glass, glass storm
French door, wood frame with single glass
French door, metal frame with single glass
French door, wood frame with double glass
French door, metal frame with double glass
French door, wood frame with triple glass
French door, metal frame with triple glass
Roof:
Flat roof - A
Flat roof - B
Flat roof - C
Sloping roof including loft
Lightweight curtain roof
Sloping roof - domestic
Un-insulated flat roof
Super-insulated flat roof
Roof terrace system
Roof terrace system
Steel sheet with 2 in insulation
Stone chipping, asphalt, screed, heavy concrete block
Stone chipping, asphalt, screed, light concrete block
Asphalt, screed, dense cast concrete, dense plaster
Asphalt, aerated concrete slab, dense plaster
Asphalt, fiberboard, aced, air, aced
Asphalt, fiberboard, gypsum
Asphalt, fiberboard, 1 in batting, gypsum
Asphalt, fiberboard, 2 in batting, gypsum
3/4 in asphalt 1/2 in fiberboard 1 in air 3 in batt 3/8 in gyp.
3/4 in asphalt 1/2 in fiberboard 2 in EPS slab 1 in air 3/8 in gyp.
3/4 in asphalt 1/2 in fiberboard 2 in EPS slab 1 in air 3/8 in gyp.
3/4 in asphalt 1/2 in screed 2 in wood wool slab 1 in air 3/8 in gyp.
3/4 in felt / bitumen 1 in EPS slab 1/8 in metal deck
4 in wood with 2 in insulation
2 1/2 in wood with 2 in insulation
8 in lightweight concrete
Concrete ballast, membrane, sheathing, insulation, metal deck
Asphalt shingles, wood sheathing, R-19 batt insulation, gyp board
Slate or tile, wood sheathing, R-19 batt insulation, gyp board
Wood shingles, wood sheathing, R-19 batt insulation, gyp board
Metal roof, R-19 batt insulation, gyp board
Metal roof, R-19 batt insulation, suspended acoustical ceiling
Metal roof, R-19 batt insulation
Membrane, sheathing, R-10 insulation board, wood deck
Membrane, sheathing, R-10 insulation, wood deck, suspended ceiling
Membrane, sheathing, R-10 insulation board, metal deck
Membrane, sheathing, R-10 insulation, metal deck, suspended ceiling
Membrane, sheathing, R-15 insulation board, metal deck
Membrane, sheathing, R-10 plus R-15 insulation boards, metal deck
Membrane, sheathing, R-15 insulation, 4 in light concrete
Membrane, sheathing, R-15 insulation, 6 in heavy concrete
Membrane, sheathing, R-15 insulation, 8 in heavy concrete
Membrane, concrete, R-19 insulation, suspended ceiling
R-10 over roof deck
R-15 over roof deck
R-19 wood framed roof
R-20 over roof deck
R-25 over roof deck
R-30 wood frame roof
R-30 over roof deck
R-15 over roof deck - cool roof
R-18.7 over roof deck
R-18.7 over roof deck - cool roof
R-38 over roof deck
R-38 over roof deck-cool roof
R-50 over roof deck
R-50 over roof deck-cool roof
R-0 wood or steel frame roof
R-0 over roof deck
R-60 over roof deck
R-19 insulation over concret deck
R-38 attic ceiling
R-30 attic ceiling
R-45 attic ceiling
R-22 insulated panels
Ballast, 2 in polystyrene, screed, concrete, plaster
Ballast, 4 in polystyrene, screed, concrete, plaster
Waterproof covering, screed, cast concrete, dense plaster
Waterproof covering, polyurethane, screed, concrete, plaster
Waterproof covering, timber decking, plasterboard
Waterproof covering, mineral fiber insulation, plasterboard
Waterproof covering, 1 1/4 in polyurethane, decking, plasterboard
Waterproof covering, 4 in polyurethane, decking, plasterboard
Waterproof covering, 8 in polyurethane, decking, plasterboard
UndergroundSlab:
Standard slab construction - A
Standard slab construction - B
Solid-ground floor
Suspended timber floor
Industrial solid
Un-insulated solid
Un-insulated suspended timber
Super-insulated
Slab edge uninsulated
Slab edge R-5 insulation
Ceilings
8 in lightweight concrete ceiling U-Value: 1.3610 W/(m² • °K )

8 in (200 mm) lightweight concrete ceiling
Material Description R-Value Thickness Conductivity Density Specific
Heat
8 in lightweight 8 in (200 mm) lightweight - 0.2032 m 0.53 W/(m • °K) 1280 840 J/(kg •
concrete concrete kg/m³ °K)
4 in reinforced-concrete ceiling U-Value: 3.6842 W/(m² • °K )

4 in (100 mm) reinforced-concrete ceiling
Heat
Concrete cast dense Concrete cast dense - 0.100 m 1.90 W/(m • °K) 2300 840 J/(kg •
reinforced reinforced kg/m³ °K)
Carpeted 4 in reinforced-concrete ceiling U-Value: 2.2826 W/(m² • °K)

Carpeted 4 in (100 mm) reinforced-concrete ceiling
Heat
Carpet Carpet - 0.0127 m 0.06 W/(m • °K) 288 kg/m³ 1380 J/(kg
• °K)

Heat
5 in reinforced-concrete ceiling (screeded) U-Value: 2.4275 W/(m² • °K )

5 in (125 mm) reinforced-concrete ceiling (upper floor screeded)
Heat
Screed Screed - 0.075 m 0.41 W/(m • °K) 1200 840 J/(kg •
kg/m³ °K)
5 in concrete ceiling U-Value: 3.4146 W/(m² • °K )

5 in (125 mm) concrete ceiling
Heat
°K)
5 in concrete ceiling (screeded) U-Value: 2.4108 W/(m² • °K )

5 in (125 mm) concrete ceiling (2 in (50 mm) floating screed on upper floor)
Heat
kg/m³ °K)
1/2 in plaster with TG boards on 16 in

U-Value: 1.6929 W/(m² • °K )
joist centers
1/2 in (12 mm) plaster ceiling with TG boards on 16 in (400 mm) joist centers
Heat
Plaster ceiling tiles Plaster ceiling tiles - 0.012 m 0.38 W/(m • °K) 1120 840 J/(kg •
kg/m³ °K)
Plaster, wood boards, glass wool on joists U-Value: 0.8226 W/(m² • °K )

1/2 in (12 mm) plaster ceiling TG boards with 1 in (25 mm) glass wool on joists
Heat
Plaster ceiling tiles Plaster ceiling tiles - 0.012 m 0.38 W/(m • °K) 1120 840 J/(kg •
kg/m³ °K)
Glass fiber wool - Glass fiber wool - fiber quilt - 0.025 m 0.040 W/(m • 12 kg/m³ 840 J/(kg •
fiber quilt °K) °K)

Heat
2 in screed, 6 in cast concrete U-Value: 2.1993 W/(m² • °K )

Ceiling 2 in (50 mm) screed, 6 in (150 mm) cast concrete
Heat
kg/m³ °K)
Wood blocks, screed, 6 in concrete U-Value: 1.5791 W/(m² • °K)

Ceiling 1 in (25 mm) wood blocks 2 in (50 mm) screed 6 in (150 mm) cast concrete
Heat
1 in wood 1 in (25 mm) wood - 0.0254 m 0.15 W/(m • °K) 608 kg/m³ 1630 J/(kg
• °K)
kg/m³ °K)
Wood blocks, concrete, batting, gypsum U-Value: 0.7457 W/(m² • °K)

Ceiling, 1 in (25 mm) wood blocks, 2 1/2 in (65 mm) cast concrete, 1 in (25 mm) air, 1 in (25 mm) batting, 5/8 in (16 mm) gypsum
Heat
• °K)
Ceiling air space Ceiling air space resistance 0.18000 (m² • - - - -
resistance °K)/W
R-30, 9 1/2 in batt R-30, 9 1/2 in (240 mm) batt - 0.2438 m 0.05 W/(m • °K) 19 kg/m³ 960 J/(kg •
insulation insulation °K)
GypBd 5/8 in (GP02) GypBd 5/8 in (1.6 cm) 0.09908 (m² • 0.015879 m 0.160266 W/(m 801.000000 837.360000
°K)/W • °K) kg/m³ J/(kg • °K)
Wood blocks, concrete, batting, metal

U-Value: 0.8057 W/(m² • °K)
deck tray
Ceiling 1 in (25 mm) wood blocks, 2 1/2 in (65 mm) cast concrete, 1 in (25 mm) air, 1 in (25 mm) batt, 1/16 in (2 mm) metal deck tray
Heat
• °K)
resistance °K)/W
Metal surface Metal surface - 0.002 m 45.28 W/(m • 7824 500 J/(kg •
°K) kg/m³ °K)
Concrete slab internal U-Value: 1.0687 W/(m² • °K)

Concrete slab internal ceiling
Heat
6 in lightweight 6 in (150 mm) lightweight - 0.1524 m 0.49 W/(m • °K) 512 kg/m³ 880 J/(kg •
concrete block concrete block °K)
Timber-joist internal U-Value: 1.2585 W/(m² • °K)

Timber-joist internal ceiling
Heat
Timber flooring Timber flooring - 0.1 m 0.14 W/(m • °K) 650 kg/m³ 1200 J/(kg
• °K)
Timber-joist internal - industry U-Value: 1.5926 W/(m² • °K)
Timber-joist internal ceiling - industry
Heat
• °K)
2 in heavyweight concrete with false

U-Value: 1.4128 W/(m² • °K )
ceiling
2 in (50 mm) heavyweight concrete deck with false ceiling
Heat
2 in heavyweight 2 in (50 mm) heavyweight - 0.0508 m 1.95 W/(m • °K) 2240 900 J/(kg •

U-Value: 1.3301 W/(m² • °K )
ceiling
Heat
4 in lightweight concrete with false ceiling U-Value: 1.0411 W/(m² • °K )

4 in (100 mm) lightweight concrete deck with false ceiling
Heat

U-Value: 1.2337 W/(m² • °K )
ceiling
Heat
8 in lightweight concrete with false ceiling U-Value: 0.8144 W/(m² • °K )

8 in (200 mm) lightweight concrete deck with false ceiling
Heat
2 in wood deck with false ceiling U-Value: 0.8985 W/(m² • °K )

2 in (50 mm) wood deck with false ceiling
Heat
• °K)
3 in wood deck with false ceiling U-Value: 0.7559 W/(m² • °K)

Heat
• °K)

U-Value: 1.1504 W/(m² • °K )
ceiling
Heat
4 in wood deck with false ceiling U-Value: 0.6524 W/(m² • °K)

Heat
• °K)
Steel deck with false ceiling U-Value: 1.4427 W/(m² • °K )

Steel deck with false ceiling
Heat
Steel Steel - 0.005 m 45 W/(m • °K) 7800 480 J/(kg •
kg/m³ °K)
Ceiling below joists, no insulation U-Value: 1.3683 W/(m² • °K)

Ceiling below joists, no insulation [Source: CIBSE]
Heat
5/8 in gyp board 5/8 in (16 mm) gyp board - 0.0159 m 0.16 W/(m • °K) 800 kg/m³ 1090 J/(kg
• °K)
No insulation No insulation 0.00001 (m² - - - -
•
°K)/W
Ceiling below joists, R-2 board insulation U-Value: 1.1015 W/(m² • °K)
Ceiling below joists, R-2 board insulation [Source: CIBSE]
Heat
• °K)
R-2 insulation R-2 insulation 0.035222 (m² - - - -
•
°K)/W
Heat
• °K)
•
°K)/W
Heat
• °K)
•
°K)/W
Heat
• °K)
•
°K)/W
Heat
• °K)
•
°K)/W
Heat
• °K)
•
°K)/W
Ceiling below joists, R-10 board insulation U-Value: 0.4315 W/(m² • °K )

Heat
• °K)
R-10 insulation R-10 insulation 1.76110 - - - -
(m² •
°K)/W
Ceiling below joists, R-11 blanket or loose

U-Value: 0.4769 W/(m² • °K)
fill
Ceiling below joists, R-11 blanket or loose fill [Source: CIBSE]
Heat
• °K)
•
°K)/W

U-Value: 0.4315 W/(m² • °K)
fill
Heat
• °K)
•
°K)/W

U-Value: 0.3917 W/(m² • °K)
fill
Heat
• °K)
•
°K)/W

U-Value: 0.2895 W/(m² • °K)
fill
Heat
• °K)
•
°K)/W

U-Value: 0.2668 W/(m² • °K )
fill
Heat
• °K)
•
°K)/W

U-Value: 0.1930 W/(m² • °K)
fill
Heat
• °K)
R-30 insulation R-21 insulation 21 (m² • - - - -
°K)/W

U-Value: 0.1646 W/(m² • °K)
fill
Heat
• °K)
•
°K)/W
Exposed beams, 1 1/2 in wood, no

U-Value: 1.6295 W/(m² • °K)
insulation
Ceiling on exposed beams, 1 1/2 in (40 mm) wood, no insulation [Source: CIBSE]
Heat
1 1/2 in wood 1 1/2 in (40 mm) wood - 0.0376 m 0.15 W/(m • °K) 608 kg/m³ 1630 J/(kg
• °K)
No insulation No insulation 0.00001 (m² • - - - -
°K)/W
Exposed beams, 1 1/2 in wood plus R-2

U-Value: 1.0333 W/(m² • °K)
insulation
Ceiling on exposed beams, 1 1/2 in (40 mm) wood plus R-2 insulation [Source: CIBSE]
Heat
• °K)
R-2 insulation R-2 insulation 0.35222 (m² • - - - -
°K)/W

U-Value: 0.8744 W/(m² • °K )
insulation
Heat
• °K)
(m² •
°K)/W
Exposed beams, 2 in cement-fiber slab, no U-Value: 0.8119 W/(m² • °K )

insulation
Ceiling on exposed beams, 2 in (50 mm) cement-fiber slab, no insulation [Source: CIBSE]
Heat
2 in Cement 2 in (50 mm) Cement 0.07083 (m² • 0.051 m 0.72 W/(m • °K) 1860 840 J/(kg •
°K)/W kg/m³ °K)
°K)/W

U-Value: 0.7608 W/(m² • °K)
insulation
Heat
• °K)
°K)/W

U-Value: 0.6700 W/(m² • °K)
insulation
Heat
• °K)
°K)/W
Exposed beams, 3 in cement-fiber slab, no U-Value: 0.6472 W/(m² • °K )

insulation
Ceiling on exposed beams, 3 in (75 mm) cement-fiber slab, no insulation [Source: CIBSE]
Heat
3 in Cement 3 in (75 mm) Cement 0.10556 (m² • 0.076 m 0.72 W/(m • °K) 1860 840 J/(kg •
°K)/W kg/m³ °K)
°K)/W

U-Value: 0.5961 W/(m² • °K )
insulation
Heat
• °K)
(m² •
°K)/W

U-Value: 0.5166 W/(m² • °K)
insulation
Heat
• °K)
°K)/W

U-Value: 0.4201 W/(m² • °K)
insulation
Heat
• °K)
°K)/W

U-Value: 0.3577 W/(m² • °K)
insulation
Heat
• °K)
°K)/W

U-Value: 0.3066 W/(m² • °K)
insulation
Heat
• °K)
°K)/W

U-Value: 0.2725 W/(m² • °K)

to R-18 insulation
Ceiling on exposed beams, 1 1/2 in (40 mm) wood plus R-17 to R-18 insulation [Source: CIBSE]
Heat
• °K)
(m² •
)/

U-Value: 0.2441 W/(m² • °K)
insulation
Heat
• °K)
°K)/W

U-Value: 0.2214 W/(m² • °K)
to R-23 insulation
Heat
• °K)
°K)/W

U-Value: 0.1987 W/(m² • °K)
to R-26 insulation
Heat
• °K)
°K)/W

U-Value: 0.1816 W/(m² • °K)
to R-29 insulation
Heat
• °K)
°K)/W

U-Value: 0.1646 W/(m² • °K)
to R-32 insulation
Heat
• °K)
•
°K)/W

U-Value: 0.1533 W/(m² • °K)
to R-35 insulation
Heat
• °K)
°K)/W
Wood block, concrete, plasterboard U-Value: 1.58 W/(m² • °K)

1 in (25 mm) wood block, 2 1/2 in (65 mm) cast concrete, 2 in (50 mm) airspace, 1/2 in (12 mm) plasterboard ceiling [Source: CIBSE]
Heat
• °K)
resistance °K)/W
Plasterboard Plasterboard - 0.012 m 0.16 W/(m • °K) 950 kg/m³ 840 J/(kg •
°K)
Exterior Walls
Standard wall construction - A U-Value: 0.3495 W/(m² • °K)

Standard wall construction
Material Description R- Thickness Conductivity Density Specific
Value Heat
Outside surface Outside surface resistance 0.04000 - - - -
resistance (m²
°K)/W
concrete block (filled) concrete block (filled) °K)
Inside vertical surface Inside vertical surface 0.12000 - - - -
resistance resistance (m²
°K)/W
Standard wall construction - B U-Value: 0.2993 W/(m² • °K)

Value Heat
resistance (m²
°K)/W
1 in stucco 1 in (25 mm) stucco - 0.0254 m 0.72 W/(m • °K) 1856 kg/m³ 840 J/(kg •
°K)
8 in concrete block 8 in (200 mm) concrete - 0.2032 m 1.11 W/(m • °K) 800 kg/m³ 920 J/(kg •
block °K)
5/8 in gyp board 5/8 in (16 mm) gyp board - 0.0159 m 0.16 W/(m • °K) 800 kg/m³ 1090 J/(kg •
°K)
°K)/W
Standard wall construction - C U-Value: 0.3967 W/(m² • °K)

Value Heat
resistance (m²
°K)/W
8 in heavyweight 8 in (200 mm) heavyweight - 0.2032 m 1.95 W/(m • °K) 2240 kg/m³ 900 J/(kg •
concrete concrete °K)
°K)
°K)/W
Brick / block wall U-Value: 0.4396 W/(m² • °K)

Brick / block wall
Value Heat
resistance • °K)/W
Metal surface Metal surface - 0.0008 m 45.28 W/(m • 7824 kg/m³ 500 J/(kg •
°K) °K)
Wall air space Wall air space resistance 0.15000 - - - -
R-10, 2 in insulation R-10, 2 in (50 mm) - 0.0508 m 0.03 W/(m • °K) 43 kg/m³ 1210 J/(kg •
board insulation board °K)
°K)
resistance resistance • °K)/W
Timber-frame wall U-Value: 0.4493 W/(m² • °K)

Timber-frame wall
Value Heat
resistance (m²
°K)/W
°K)
°K)/W
Lightweight curtain wall U-Value: 0.4522 W/(m² • °K)

Lightweight curtain wall
Value Heat
resistance (m²
°K)/W
°K)
°K)/W
Metal-clad wall U-Value: 0.4546 W/(m² • °K)

Metal-clad wall
Value Heat
resistance (m²
°K)/W
°K)
Inside vertical surface Inside vertical surface 0.12000 (m² - - - -

Brick / block wall
Value Heat
Outside surface Outside surface resistance 0.04000 (m² - - -
- resistance • °K)/W
°K)
Inside vertical surface Inside vertical surface 0.12000 (m² - - -
- resistance resistance • °K)/W

Brick / block wall
Value Heat
4 in brick 4 in (100 mm) brick - 0.1016 m 0.89 W/(m • °K) 1920 kg/m³ 790 J/(kg •
°K)
Wall air space Wall air space resistance 0.15000 (m² - - -
R-5, 1 in insulation R-5, 1 in (25 mm) insulation - 0.0254 m 0.03 W/(m • °K) 43 kg/m³ 1210 J/(kg •
board board °K)
°K)
Timber-frame wall U-Value: 0.5779 W/(m² • °K)

Timber-frame wall
Value Heat
resistance (m²
°K)/W
°K)
Wall air space Wall air space resistance 0.15000 (m² - - - -
board board °K)
12 in heavyweight 12 in (300 mm) - 0.3048 m 1.95 W/(m • °K) 2240 kg/m³ 900 J/(kg •
concrete heavyweight concrete °K)
°K)

Brick / block wall
Value Heat
°K)
board board °K)
°K)
Lightweight concrete-clad wall U-Value: 0.5445 W/(m² • °K)

Lightweight concrete-clad wall
Value Heat
resistance (m²
°K)/W
°K)
resistance (m²
°K)/W
board board °K)
resistance (m²
°K)/W
°K)
(m²
• °K)/W
Brickwork single-leaf construction dense U-Value: 2.1839 W/(m² • °K)

plaster
Brickwork single-leaf construction dense plaster
Value Heat
Face brick 4 in (BK05) 4 in (10.1cm) face brick 0.07747 0.101585 m 1.311205 W/(m 2082.600000 921.096000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Bldg paper felt (BP01) Permeable felt 0.01057 - - - -
(m²
°K)/W
Wood Sft 3/4 in Wood Sft 3/4 in (1.9 cm) 0.16501 0.019049 m 0.115440 W/(m 512.640000 1381.644000
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Minwool batt R0 w/ Batt, R-0 including framing 0.17083 - - - -
2x4 frame factor (m²
°K)/W
GypBd 5/8 in (GP02) GypBd 5/8 in (1.6 cm) 0.09908 0.015879 m 0.160266 W/(m 801.000000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Brickwork single-leaf construction light

U-Value: 1.9487 W/(m² • °K)

plaster
Brickwork single-leaf construction light plaster
Value Heat
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Un-insulated brick/block wall U-Value: 1.4269 W/(m² • °K)

Un-insulated brick/block wall
Value Heat
Soil 8 in Soil 8 in (20.3 cm) 0.11799 0.204206 m 1.730735 W/(m 1842.300000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Polystyrene 3/4 in Polystyrene 3/4 in (1.9 cm) 0.55031 0.019049 m 0.034615 W/(m 28.836000 1214.172000
(IN32) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Conc heavyweight Conc heavyweight 140lb 8 in 0.15497 0.203200 m 1.311205 W/(m 2242.800000 837.360000
140lb 8 in (CC05) (20.3cm) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Super-insulated external wall U-Value: 0.2204 W/(m² • °K)

Super-insulated external wall
Value Heat
resistance (m²
• °K)/W
°K)
block °K)
°K)
Sheet steel U-Value: 5.8817 W/(m² • °K)

Sheet steel
Value Heat
resistance (m²
°K)/W
°K)
block °K)
°K)
°K)/W
Sheet aluminum U-Value: 5.8821 W/(m² • °K)

Sheet aluminum
Value Heat
resistance (m²
°K)/W
°K)
block °K)
°K)
°K)/W
Brickwork single-leaf construction with

U-Value: 0.6723 W/(m² • °K)

insulation and plaster
Brickwork single-leaf construction with insulation and plaster
Value Heat
°K)
Polyurethane Polyurethane insulation - 0.025 m 0.025 W/(m • 30 kg/m³ 1400 J/(kg •
insulation °K) °K)
Plaster (dense) Plaster (dense) - 0.025 m 0.5 W/(m • °K) 1300 kg/m³ 1000 J/(kg •
°K)
°K)
Brickwork single-leaf construction fiber

U-Value: 0.7362 W/(m² • °K)

insulation and render
Brickwork single-leaf construction fiber insulation and render
Value Heat
°K)
External render External render - 0.019 m 0.5 W/(m • °K) 1300 kg/m³ 1000 J/(kg •
°K)
°K)
Brickwork single-leaf construction EPS

U-Value: 0.5596 W/(m² • °K)

insulation and render
Brickwork single-leaf construction EPS insulation and render
Value Heat
°K)
Expanded polystyrene Expanded polystyrene (EPS) - 0.025 m 0.035 W/(m • 25 kg/m³ 1400 J/(kg •
(EPS) °K) °K)
°K)
°K)
Lightweight concrete block air gap and

U-Value: 0.6825 W/(m² • °K)

plasterboard
Lightweight concrete block air gap and plasterboard
Value Heat
resistance (m²
°K)/W
°K)
Lightweight concrete block GRP U-Value: 0.5602 W/(m² • °K)

insulation and plasterboard
Lightweight concrete block GRP insulation and plasterboard
Value Heat
°K)
Lightweight concrete block poly-

U-Value: 0.4376 W/(m² • °K)

insulation and plasterboard
Lightweight concrete block poly-insulation and plasterboard
Value Heat
°K)
Brick cavity with dense plaster U-Value: 1.4917 W/(m² • °K)

Brick cavity with dense plaster
Value Heat
Brick Brick - 0.220 m 0.72 W/(m • °K) 1920 kg/m³ 840 J/(kg •
°K)
1/2 in plaster (dense) 1/2 in (12 mm) plaster - 0.013 m 0.5 W/(m • °K) 1300 kg/m³ 1000 J/(kg •
(dense) °K)
°K)
Brick cavity with mineral insulation and

U-Value: 0.6945 W/(m² • °K)

lightweight plaster
Brick cavity with mineral insulation and lightweight plaster
Value Heat
°K)
4 in mineral fiber 4 in (100 mm) mineral fiber - 0.095 m 0.035 W/(m • 30 kg/m³ 1000 J/(kg •
insulation insulation °K) °K)
Plaster (lightweight) Plaster (lightweight) - 0.013 m 0.16 W/(m • °K) 600 kg/m³ 1000 J/(kg •
°K)
°K)
Brick cavity full mineral insulation and
U-Value: 0.5065 W/(m² • °K)

lightweight plaster
Brick cavity full mineral insulation and lightweight plaster
Value Heat
°K)
°K)
°K)
Brick cavity with UF foam insulation and

U-Value: 0.8543 W/(m² • °K)

lightweight plaster
Brick cavity with UF foam insulation and lightweight plaster
Value Heat
°K)
Urea formaldehyde Urea formaldehyde (UF) - 0.050 m 0.040 W/(m • 10 kg/m³ 1400 J/(kg •
(UF) foam insulation foam insulation °K) °K)
°K)
°K)
Brick, heavy concrete block, phenolic

U-Value: 0.8048 W/(m² • °K)

foam, light plaster
Brick-air heavyweight concrete block and Phenolic foam and lightweight plaster
Value Heat
°K)
Air space Air space proxy for air wall 0.10919 (m² - - -
- or no
construction • °K)/W
Foam - phenol Foam - phenol - -m 0.040 W/(m • 30 kg/m³ 1400 J/(kg •
°K) °K)
°K)
°K)
Brick, heavy concrete block, mineral

U-Value: 0.5359 W/(m² • °K)
insulation, light plaster
Brick-air heavyweight concrete block and full mineral insulation and lightweight plaster
Value Heat
°K)
Air space Air space proxy for air wall 0.10919 - - - -
or no construction • °K)/W
°K)
°K)
Brick, medium concrete block, foam

U-Value: 0.5487 W/(m² • °K)

Brick-air medium concrete block, urea formaldehyde (UF) foam insulation and light-weight plaster
Value Heat
°K)
- or no construction
• °K)/W
°K) °K)
°K)
°K)
Brick, light concrete block, foam

U-Value: 0.4646 W/(m² • °K)

Brick-air thermolite block and UF insulation and lightweight plaster
Value Heat
°K)
(m² or no construction • °K)/W
°K) °K)
°K)
°K)
Brick, light concrete block, light plaster U-Value: 0.9237 W/(m² • °K)
Brick-air lightweight concrete block and lightweight plaster
Value Heat
°K)
Air space Air space proxy for air wall 0.10919 (m² - - - -
°K)
°K)
Brick, foam insulation, light concrete

U-Value: 0.5856 W/(m² • °K)

block, light plaster
Brick-air UF insulation lightweight concrete block and lightweight plaster
Value Heat
°K)
°K)
°K)
Brick, mineral insulation, light concrete

U-Value: 0.3855 W/(m² • °K)

block, light plaster
Brick mineral insulation thermolite block and lightweight plaster
Value Heat
°K)
°K)
°K)
Face brick, insulation, light concrete

U-Value: 0.5511 W/(m² • °K)

block
4 in (100 mm) face brick 2 in (50 mm) insulation and 4 in (100 mm) lightweight concrete block
Value Heat
°K)
°K)
4 in lightweight concrete U-Value: 1.1407 W/(m² • °K)

4 in (100 mm) lightweight concrete
Value Heat
4 in face brick, 8 in common brick U-Value: 1.2100 W/(m² • °K)

4 in (100 mm) face brick, air space and 8 in (200 mm) common brick
Value Heat
°K)
External wall airspace External wall airspace 0.18000 (m² 0.050 m - W/(m • °K) - kg/m³ - J/(kg • °K)
• °K)/W
°K)
4 in face brick, 8 in heavyweight

U-Value: 1.4244 W/(m² • °K)

concrete block
4 in (100 mm) face brick air space and 8 in (200 mm) heavyweight concrete block
Value Heat
°K)
• °K)/W
°K)
4 in face brick, 8 in lightweight concrete

U-Value: 1.1562 W/(m² • °K)

block
4 in (100 mm) face brick air space and 8 in (200 mm) lightweight concrete block
Value Heat
°K)
• °K)/W
4 in face brick air space and 8 in clay tile U-Value: 1.1077 W/(m² • °K)
4 in (100 mm) face brick air space and 8 in (200 mm) clay tile
Value Heat
°K)
• °K)/W
Hol clay tile 8 in 2 cells, 8 in (20.3cm) 0.32613 0.203200 m 0.623065 W/(m 1121.400000 837.360000
(m² (CT04) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)
4 in face brick air space and 2 in

U-Value: 1.7352 W/(m² • °K)

heavyweight concrete
4 in (100 mm) face brick air space and 2 in (50 mm) heavyweight concrete
Value Heat
°K)
• °K)/W
concrete roof ballast concrete roof ballast °K)
°K)
4 in face brick air space and 4 in common U-Value: 1.4563 W/(m² • °K)

brick
4 in (100 mm) face brick air space and 4 in (100 mm) common brick
Value Heat
°K)
• °K)/W
°K)

U-Value: 1.6013 W/(m² • °K)

heavyweight concrete block
4 in (100 mm) face brick air space and 4 in (100 mm) heavyweight concrete block
Value Heat
°K)
• °K)/W

U-Value: 1.2280 W/(m² • °K)

lightweight concrete block
4 in (100 mm) face brick air space and 4 in (100 mm) lightweight concrete block
Value Heat
°K)
• °K)/W
°K)
12 in heavyweight concrete U-Value: 1.9968 W/(m² • °K)

12 in (300 mm) heavyweight concrete
Value Heat
8 in heavyweight concrete with 2 in

U-Value: 0.6160 W/(m² • °K)

insulation
8 in (200 mm) heavyweight concrete with 2 in (50 mm) insulation
Value Heat
block °K)
block °K)

U-Value: 0.9683 W/(m² • °K)

insulation
Value Heat
block °K)
board board °K)
block °K)
8 in heavyweight concrete with air space U-Value: 1.6076 W/(m² • °K)

8 in (200 mm) heavyweight concrete with air space
Value Heat
block °K)
External wall airspace External wall airspace 0.18000 0.050 m - W/(m • °K) - kg/m³ - J/(kg • °K)
(m²
°K)/W
block °K)

Value Heat
block °K)
4 in face brick 8 in common brick with 1

U-Value: 0.8091 W/(m² • °K)

in insulation
4 in (100 mm) face brick 8 in (200 mm) common brick with 1 in (25 mm) insulation
Value Heat
°K)
board board °K)
Com brick 8 in (BK02) 8 in (20.3 cm) common 0.28175 (m² 0.203200 0.721197 W/(m 1922.400000 837.360000
m • °K) kg/m³ J/(kg • °K)
brick °K)/W
4 in face brick 8 in common brick with air U-Value: 1.2118 W/(m² • °K)

space
4 in (100 mm) face brick 8 in (200 mm) common brick with air space
Value Heat
°K)
• °K)/W
Com brick 8 in (BK02) 8 in (20.3 cm) common 0.28175 0.203200 m 0.721197 W/(m 1922.400000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
b ick °K)/W

U-Value: 0.9866 W/(m² • °K)

lightweight block
4 in (100 mm) face brick air space and 4 in (100 mm) lightweight block
Value Heat
°K)
• °K)/W
Wall with 3 in fiberglass insulation and
U-Value: 0.4992 W/(m² • °K)

stucco outside finish
Wall with 3 in (75 mm) fiberglass insulation and stucco outside finish
Value Heat
°K)
Two-sided brick wall with air spac e U-Value: 1.9894 W/(m² • °K)
Two-sided brick wall with air space
Value Heat
°K)
(m²
°K)/W
Brick wall 8 in concrete block and no air

U-Value: 1.2320 W/(m² • °K)

space
Brick wall 8 in (200 mm) concrete block and no air space
Value Heat
Brick wall with 4 in concrete block U-Value: 1.8709 W/(m² • °K)

Brick wall with 4 in (100 mm) concrete block
Value Heat
°K)
Brick wall with 8 in concrete block U-Value: 1.6339 W/(m² • °K)

Brick wall with 8 in (200 mm) concrete block
Value Heat
Brick wall with 6 in concrete U-Value: 1.1655 W/(m² • °K)

Brick wall with 6 in (150 mm) concrete
Value Heat

Frame wall with 2 in insulation and 4 in

U-Value: 0.6857 W/(m² • °K)

brick veneer
Frame wall with 2 in (50 mm) insulation and 4 in (100 mm) brick veneer
Value Heat
Polystyrene 3 1/2 in Polystyrene 3 1/2 in (90 2.20138 - - - -
(m² w/ 48 in oc SIP wall mm) including SIP wall • °K)/W
frame frame factor
°K)
frame frame factor
Frame wall with 2 in insulation U-Value: 0.7079 W/(m² • °K)

Frame wall with 2 in (50 mm) insulation
Value Heat
frame frame factor
frame frame factor
Metal curtain wall with 3 in insulation U-Value: 0.5149 W/(m² • °K)

Metal curtain wall with 3 in (75 mm) insulation
Value Heat
°K) °K)
°K) °K)

Value Heat
°K) °K)
°K) °K)
Value Heat
°K) °K)
board board °K)
°K) °K)
Wall 12 in concrete with 2 in insulation

U-Value: 0.6418 W/(m² • °K)

on the outside
Wall 12 in (300 mm) concrete with 2 in (50 mm) insulation on the outside
Value Heat
block °K)
Wall 8 in concrete with 2 in insulation on U-Value: 0.6669 W/(m² • °K)

the outside
Value Heat
block °K)

the outside
Value Heat
Wall 12 in concrete with 2 in insulation U-Value: 0.6418 W/(m² • °K)

on the inside
Wall 12 in (300 mm) concrete with 2 in (50 mm) insulation on the inside
Value Heat
block °K)
block °K)

the inside
Value Heat
block °K)
block °K)

the inside
Value Heat

Value Heat
frame frame factor
frame frame factor

Value Heat

w/ 48 in oc SIP wall mm) including SIP wall (m²
frame frame factor • °K)/W

Value Heat
frame frame factor
board board °K)
frame frame factor
Frame wall without insulation U-Value: 1.9818 W/(m² • °K)

Frame wall without insulation
Value Heat
frame frame factor
frame frame factor
2 in insulation with 12 in heavyweight

U-Value: 0.5945 W/(m² • °K)

concrete
2 in (50 mm) insulation with 12 in (300 mm) heavyweight concrete
Value Heat
block °K)

U-Value: 0.6160 W/(m² • °K)

concrete
Value Heat
block °K)
2 in insulation with 8 in common brick U-Value: 0.5601 W/(m² • °K)

2 in (50 mm) insulation with 8 in (200 mm) common brick
Value Heat
block °K)

U-Value: 0.6020 W/(m² • °K)

concrete block
2 in (50 mm) insulation with 8 in (200 mm) heavyweight concrete block
Value Heat
2 in insulation with 8 in lightweight

U-Value: 0.4900 W/(m² • °K)

concrete block
2 in (50 mm) insulation with 8 in (200 mm) lightweight concrete block
Value Heat
2 in insulation with 8 in clay tile U-Value: 0.5371 W/(m² • °K)

2 in (50 mm) insulation with 8 in (200 mm) clay tile
Value Heat
(CT04) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
U-Value: 0.6391 W/(m² • °K)

concrete
Value Heat

Value Heat
°K)
°K)

U-Value: 0.6315 W/(m² • °K)

concrete block
2 in (50 mm) insulation with 4 in (100 mm) heavyweight concrete block
Value Heat

U-Value: 0.5639 W/(m² • °K)

concrete block
Value Heat

Value Heat
°K)
Hol clay tile 4 in 1 cell, 4 in (10.1cm) 0.19571 (m² 0.101585 m 0.519047 W/(m 1121.400000
(CT02) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)
4 in face brick, 2 in insulation, 12 in

U-Value: 0.5803 W/(m² • °K)

heavy concrete
4 in (100 mm) face brick 2 in (50 mm) insulation and 12 in (300 mm) heavyweight concrete
Value Heat
°K)
°K)
4 in face brick, 2 in insulation, 8 in heavy U-Value: 0.6008 W/(m² • °K)

concrete
Value Heat
°K)
°K)
4 in face brick 2 in insulation and 8 in

U-Value: 0.5475 W/(m² • °K)

common brick
4 in (100 mm) face brick 2 in (50 mm) insulation and 8 in (200 mm) common brick
Value Heat
°K)
Com brick 8 in (BK02) 8 in (20.3 cm) common 0.28175 (m² 0.203200 0.721197 W/(m 1922.400000 837.360000
m • °K) kg/m³ J/(kg • °K)
b ick °K)/W
board insulation board

U-Value: 1.3852 W/(m² • °K)

Value Heat
°K)
- resistance
• °K)/W
°K)

U-Value: 1.5079 W/(m² • °K)

Value Heat
°K)
- resistance
• °K)/W
- resistance
• °K)/W
°K)

concrete block
4 in (100 mm) face brick 2 in (50 mm) insulation and 8 in (200 mm) heavyweight concrete block
Value Heat
°K)
°K)
4 in face brick, 2 in insulation, 8 in light
U-Value: 0.5362 W/(m² • °K)

concrete block
4 in (100 mm) face brick 2 in (50 mm) insulation and 8 in (200 mm) lightweight concrete block
Value Heat
°K)
°K)

U-Value: 0.5362 W/(m² • °K)
clay tile
2 in (50 mm) face brick 2 in (50 mm) insulation and 8 in (200 mm) clay tile
Value Heat
°K)
Hol clay tile 8 in 2 cells, 8 in (20.3cm) 0.32613 (m² 0.203200 m 0.623065 W/(m
1121.400000 837.360000 (CT04) • °K)/W • °K)
kg/m³ J/(kg • °K)
°K)

U-Value: 0.6227 W/(m² • °K)

Value Heat
°K)
°K)

U-Value: 0.5928 W/(m² • °K)
common brick
4 in (100 mm) face brick 2 in (50 mm) insulation and 4 in (100 mm) common brick
Value Heat
°K)
brick • °K)/W • °K) kg/m³ J/(kg • °K)
°K)

concrete block
4 in (100 mm) face brick 2 in (50 mm) insulation and 4 in (100 mm) heavyweight concrete block
Value Heat
°K)
°K)
4 in face brick with 8 in common brick U-Value: 1.5499 W/(m² • °K)

4 in (100 mm) face brick with 8 in (200 mm) common brick
Value Heat
°K)
brick (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)
8 in heavyweight concrete block with 1

U-Value: 0.9342 W/(m² • °K)

in insulation
8 in (200 mm) heavyweight concrete block with 1 in (25 mm) insulation
Value Heat
board board °K)
8 in heavyweight concrete block U-Value: 2.0846 W/(m² • °K)
8 in (200 mm) heavyweight concrete block
Value Heat
8 in lightweight concrete block with

U-Value: 1.5562 W/(m² • °K)

insulation
8 in (200 mm) lightweight concrete block with insulation
Value Heat
board board °K)
8 in lightweight concrete block U-Value: 0.8108 W/(m² • °K)

8 in (200 mm) lightweight concrete block
Value Heat
4 in face brick 8 in clay tile and 1 in

U-Value: 0.5255 W/(m² • °K)
insulation
4 in (100 mm) face brick 8 in (200 mm) clay tile and 1 in (25 mm) insulation
Value Heat
°K)
1121.400000 837.360000 (CT04) • °K)/W • °K)
board board °K)
1121.400000 837.360000 (CT04) • °K)/W • °K)
°K)
4 in face brick 8 in clay tile and air space U-Value: 1.1092 W/(m² • °K)
4 in (100 mm) face brick 8 in (200 mm) clay tile and air space
Value Heat
°K)
(CT04) • °K)/W • °K) kg/m³ J/(kg • °K)
(CT04) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)
4 in face brick with 8 in clay tile U-Value: 1.3859 W/(m² • °K)

4 in (100 mm) face brick with 8 in (200 mm) clay tile
Value Heat
°K)
(CT04) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)
8 in clay tile with 1 in Insulation U-Value: 0.7867 W/(m² • °K)

8 in (200 mm) clay tile with 1 in (25 mm) Insulation
Value Heat
(CT04) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
board board °K)
(CT04) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
8 in clay tile with air space U-Value: 1.1622 W/(m² • °K)

8 in (200 mm) clay tile with air space
Value Heat
(CT04) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
or no construction (m²
°K)/W
(CT04) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
8 in clay tile U-Value: 1.4696 W/(m² • °K)

8 in (200 mm) clay tile
Value Heat
1121.400000 837.360000 (CT04) • °K)/W • °K)
1121.400000 837.360000 (CT04) • °K)/W • °K)
kg/m³ J/(kg °K)
U-Value: 0.6391 W/(m² • °K)

insulation
Value Heat

U-Value: 1.0267 W/(m² • °K)

insulation
Value Heat
board board °K)
4 in heavyweight concrete with air space U-Value: 1.7752 W/(m² • °K)

4 in (100 mm) heavyweight concrete with air space
Value Heat
°K)/W

Value Heat
4 in face brick 4 in common brick and 1

U-Value: 0.9123 W/(m² • °K)
in insulation
4 in (100 mm) face brick 4 in (100 mm) common brick and 1 in (25 mm) insulation
Value Heat
°K)
board board °K)
°K)
4 in face brick 4 in common brick and air

U-Value: 1.4589 W/(m² • °K)

space
4 in (100 mm) face brick 4 in (100 mm) common brick and air space
Value Heat
°K)
(m² • °K) kg/m³ J/(kg • °K)
b ick °K)/W
(m² • °K) kg/m³ J/(kg • °K)
brick °K)/W
°K)
4 in face brick with 4 in common brick U-Value: 1.9784 W/(m² • °K)

4 in (100 mm) face brick with 4 in (100 mm) common brick
Value Heat
°K)
°K)/W
°K)/W
°K)
4 in common brick U-Value: 2.1535 W/(m² • °K)

4 in (100 mm) common brick
Value Heat
°K)/W
°K)/W

Value Heat
4 in face brick, 4 in light concrete block,

U-Value: 0.8171 W/(m² • °K)

1 in insulation
4 in (100 mm) face brick 4 in (100 mm) lightweight concrete block and 1 in (25 mm) insulation
Value Heat
°K)
board board °K)
°K)
4 in face brick 4 in lightweight concrete

U-Value: 1.2299 W/(m² • °K)

block and air space
4 in (100 mm) face brick 4 in (100 mm) lightweight concrete block and air space
Value Heat
°K)
- or no
°K)
4 in face brick with 4 in lightweight

U-Value: 1.5796 W/(m² • °K)

concrete block
4 in (100 mm) face brick with 4 in (100 mm) lightweight concrete block
Value Heat
°K)
°K)
4 in lightweight concrete block and 1 in
U-Value: 0.8455 W/(m² • °K)

insulation
4 in (100 mm) lightweight concrete block and 1 in (25 mm) insulation
Value Heat
board board °K)
4 in lightweight concrete block and air

U-Value: 1.2954 W/(m² • °K)

space
4 in (100 mm) lightweight concrete block and air space
Value Heat
°K)/W

Value Heat
4 in face brick 4 in clay tile and 1 in

U-Value: 0.8816 W/(m² • °K)
insulation
4 in (100 mm) face brick 4 in (100 mm) clay tile and 1 in (25 mm) insulation
Value Heat
°K)
Hol clay tile 4 in 1 cell, 4 in (10.1cm) 0.19571 (m² 0.101585 m 0.519047 W/(m
1121.400000 837.360000 (CT02) • °K)/W • °K)
board board °K)
1121.400000 837.360000 (CT02) • °K)/W • °K)
°K)
4 in face brick 4 in clay tile and air space U-Value: 1.3819 W/(m² • °K)

4 in (100 mm) face brick 4 in (100 mm) clay tile and air space
Value Heat
°K)
Hol clay tile 4 in 1 cell, 4 in (10.1cm) 0.19571 0.101585 m 0.519047 W/(m 1121.400000 837.360000
(CT02) • °K)/W • °K) kg/m³ J/(kg • °K)
(CT02) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)
4 in face brick and 4 in clay tile U-Value: 1.8394 W/(m² • °K)

4 in (100 mm) face brick and 4 in (100 mm) clay tile
Value Heat
°K)
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)
4 in clay tile and 1 in insulation U-Value: 0.9147 W/(m² • °K)

4 in (100 mm) clay tile and 1 in (25 mm) insulation
Value Heat
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
board board °K)
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
4 in clay tile and air space U-Value: 0.9 W/(m² • °K)

4 in (100 mm) clay tile and air space
Value Heat
1121.400000 837.360000 (CT02) • °K)/W • °K)
- or no construction • °K)/W
1121.400000 837.360000 (CT02) • °K)/W • °K)

Value Heat
(CT02) • °K)/W • °K) kg/m³ J/(kg • °K)
Sheet metal with 1 in insulation U-Value: 1.0630 W/(m² • °K)

Sheet metal with 1 in (25 mm) insulation
Value Heat
°K) °K)
board board °K)
°K) °K)

Value Heat
°K) °K)
°K) °K)

Value Heat
°K) °K)
°K) °K)

U-Value: 0.3104 W/(m² • °K)

concrete block
Value Heat

U-Value: 0.2271 W/(m² • °K)
concrete block
Value Heat

Value Heat
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W

U-Value: 0.3565 W/(m² • °K)

insulation
Value Heat
°K)

U-Value: 0.2509 W/(m² • °K)

insulation
Value Heat

Value Heat
°K)/W
°K)/W

Value Heat
°K)/W
°K)/W

Value Heat
frame frame factor

Value Heat
frame frame factor
frame frame factor

Value Heat
frame frame factor
frame frame factor

Value Heat
°K) °K)
°K) °K)
Frame wall with 6 in insulation and 4 in
U-Value: 0.2617 W/(m² • °K)

brick veneer
Value Heat
°K)
°K) °K)
°K) °K)
°K)
Frame wall with 12 in insulation and 4 in U-Value: 0.1358 W/(m² • °K)

brick veneer
Value Heat
°K)
°K) °K)
°K) °K)
°K)
4 in face brick U-Value: 0.3282 W/(m² • °K)

4 in (100 mm) face brick
Value Heat
°K)

Value Heat
°K)

Value Heat
°K)

Value Heat
°K)

Value Heat
°K)

Value Heat
°K) °K)
°K) °K)

Value Heat
°K) °K)
°K) °K)

Value Heat
°K) °K)
board board °K)
°K) °K)
Wall 12 in concrete with 2 in insulation

U-Value: 0.6404 W/(m² • °K)

on the outside
Value Heat

the outside
Value Heat

the outside
Value Heat
4 in face brick with 2 in insulation U-Value: 0.5255 W/(m² • °K)

4 in (100 mm) face brick with 2 in (50 mm) insulation
Value Heat
°K)
Spandrel glass, R-10 insulation board,

U-Value: 0.428 W/(m² • °K)

gyp board
Spandrel glass, R-10 insulation board, gyp board [Source: ASHRAE]
Value Heat
(m² resistance • °K)/W
Opaque spandral glass Opaque spandral glass - 0.0064 m 0.99 W/(m • °K) 2528 kg/m³ 880 J/(kg •
°K)
°K)
(m² resistance resistance • °K)/W
Metal wall panel, R-10 insulation board,

U-Value: 0.429 W/(m² • °K)

gyp board
Metal wall panel, R-10 insulation board, gyp board [Source: ASHRAE]
Value Heat
°K) °K)
°K)
Metal wall panel, sheathing, R-11 batt

U-Value: 0.419 W/(m² • °K)

insulation, gyp board
Metal wall panel, sheathing, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K) °K)
1/2 in fiberboard 1/2 in (12 mm) fiberboard - 0.0127 m 0.07 W/(m • °K) 400 kg/m³ 1300 J/(kg •
sheathing sheathing °K)
°K)
1 in stone, R-10 insulation board, gyp

U-Value: 0.428 W/(m² • °K)

board
1 in (25 mm) stone, R-10 insulation board, gyp board [Source: ASHRAE]
Value Heat
1 in stone 1 in (25 mm) stone - 0.0254 m 3.17 W/(m • °K) 2560 kg/m³ 790 J/(kg •
°K)
°K)
1 in stone, sheathing, R-11 batt

U-Value: 0.417 W/(m² • °K)

1 in (25 mm) stone, sheathing, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
°K)
- resistance resistance
• °K)/W
1 in stucco, sheathing, R-11 batt

U-Value: 0.413 W/(m² • °K)
1 in (25 mm) stucco, sheathing, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
°K)
°K)
1 in stucco, 8 in heavyweight CMU, R-11

U-Value: 0.414 W/(m² • °K)

batt insulation, gyp board
1 in (25 mm) stucco, 8 in (200 mm) heavyweight CMU, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
°K)
Wood siding, sheathing, batt insulation,

U-Value: 0.406 W/(m² • °K)

1/2 in wood
Wood siding, sheathing, batt insulation, 1/2 in (12 mm) wood [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
Wood siding Wood siding - 0.0127 m 0.09 W/(m • °K) 592 kg/m³ 1170 J/(kg •
°K)
5/8 in plywood 5/8 in (16 mm) plywood - 0.0159 m 0.12 W/(m • °K) 544 kg/m³ 1210 J/(kg •
°K)
1/2 in wood 1/2 in (12 mm) wood - 0.0127 m 0.15 W/(m • °K) 608 kg/m³ 1630 J/(kg •
°K)
• °K)/W
EIFS finish, R-5 insulation board,

U-Value: 0.668 W/(m² • °K)
sheathing, gyp board
EIFS finish, R-5 insulation board, sheathing, gyp board [Source: ASHRAE]
Value Heat
EIFS finish EIFS finish - 0.0095 m 0.72 W/(m • °K) 1856 kg/m³ 840 J/(kg •
°K)
board board °K)
°K)
Synthetic stucco, R-5 plus R-11

U-Value: 0.305 W/(m² • °K)

insulation, gypsum board
Synthetic stucco (EIFS) finish, R-5 insulation board, sheathing, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
°K)
board board °K)
°K)
Synthetic stucco, insulation, sheathing,

U-Value: 0.524 W/(m² • °K)

light concrete, gypsum
EIFS finish, R-5 insulation board, sheathing, 8 in (200 mm) lightweight CMU, gyp board [Source: ASHRAE]
Value Heat
°K)
board board °K)
°K)
°K)/W
Synthetic stucco, insulation, concrete,

U-Value: 0.467 W/(m² • °K)
gypsum
EIFS finish, R-10 insulation board, 8 in (200 mm) heavyweight concrete, gypsum [Source: ASHRAE]
Synthetic stucco, insulation board, light

U-Value: 0.650 W/(m² • °K)

concrete, gypsum
EIFS finish, R-5 insulation board, 8 in (200 mm) lightweight concrete, gyp board [Source: ASHRAE]
Value Heat
°K)
°K)
Brick, R-5 insulation board, sheathing,

U-Value: 0.571 W/(m² • °K)

gypsum
Brick, R-5 insulation board, sheathing, gypsum board [Source: ASHRAE]
Value Heat
°K)
board board °K)
°K)
Brick, sheathing, R-11 batt insulation, U-Value: 0.377 W/(m² • °K)

gypsum
Brick, sheathing, R-11 batt insulation, gypsum board [Source: ASHRAE]
Value Heat
°K)
°K)
Brick, R-5 plus R-11 insulation with

U-Value: 0.283 W/(m² • °K)

sheathing, gypsum
Brick, R-5 insulation board, sheathing, R-11 batting insulation, gypsum board [Source: ASHRAE]
Value Heat
°K)
board board °K)
°K)
Brick, R-5 insulation board, 8 in light-

U-Value: 0.581 W/(m² • °K)

weight concrete block
Brick, R-5 insulation board, 8 in (200 mm) lightweight CMU [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
- resistance
• °K)/W
board board °K)
°K)/W
Brick, 8 in lightweight CMU, R-11 batt

U-Value: 0.348 W/(m² • °K)

Brick, 8 in (200 mm) lightweight CMU, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
- resistance
• °K)/W
°K)
• °K)/W
Brick, R-5 insulation board, 8 in

U-Value: 0.628 W/(m² • °K)

heavyweight CMU, gyp board
Brick, R-5 insulation board, 8 in (200 mm) heavyweight CMU, gyp board [Source: ASHRAE]
Value Heat
°K)
board board °K)
block °K)
°K)
Brick, R-5 insulation board, brick U-Value: 0.702 W/(m² • °K)

Brick, R-5 insulation board, brick [Source: ASHRAE]
Value Heat
(m²
°K)
board board °K)
°K)

U-Value: 0.514 W/(m² • °K)

lightweight concrete, gyp board
Brick, R-5 insulation board, 8 in (200 mm) lightweight concrete, gyp board [Source: ASHRAE]
Value Heat
°K)
board board °K)
°K)

U-Value: 0.581 W/(m² • °K)

heavyweight concrete, gyp board
Brick, R-5 insulation board, 12 in (300 mm) heavyweight concrete, gyp board [Source: ASHRAE]
Value Heat
°K)
board board °K)
°K)
resistance (m²
)/
Brick, 8 in heavyweight concrete, R-11

U-Value: 0.389 W/(m² • °K)

Brick, 8 in (200 mm) heavyweight concrete, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
°K)
°K)
4 in lightweight concrete, R-5 board

U-Value: 0.673 W/(m² • °K)

4 in (100 mm) lightweight concrete, R-5 board insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
• °K)/W
4 in lightweight concrete, R-11 batt

U-Value: 0.418 W/(m² • °K)

4 in (100 mm) lightweight concrete, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
board board °K)
°K)
°K)/W
4 in lightweight concrete, R-10 board

U-Value: 0.434 W/(m² • °K)

insulation, 4 in lightweight concrete
4 in (100 mm) lightweight concrete, R-10 board insulation, 4 in (100 mm) lightweight concrete [Source: ASHRAE]
Value Heat
°K)
8 in lightweight CMU, R-11 batt

U-Value: 0.383 W/(m² • °K)

8 in (200 mm) lightweight CMU, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
block °K)
°K)
• °K)/W
8 in concrete block, filled, R-11

U-Value: 0.335 W/(m² • °K)
insulation, gypsum
8 in (200 mm) light-weight concrete block (CMU) with fill insulation, R-11 batt insulation and gypsum board [Source: ASHRAE]
Value Heat
U-Value: 1.056 W/(m² • °K)

8 in lightweight CMU with fill insulation
8 in (200 mm) lightweight CMU with fill insulation [Source: ASHRAE]
Value Heat
°K)
8 in lightweight CMU with fill insulation,

U-Value: 0.834 W/(m² • °K)

gyp board
8 in (200 mm) lightweight CMU with fill insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
board board °K)
- resistance
• °K)/W
°K)
• °K)/W
8 in lightweight concrete, R-11 batt

U-Value: 0.387 W/(m² • °K)

8 in (200 mm) lightweight concrete, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
• °K)/W
8 in heavyweight concrete, R-11 batt

U-Value: 0.434 W/(m² • °K)

8 in (200 mm) heavyweight concrete, R-11 batt insulation, gyp board [Source: ASHRAE]
Value Heat
12 in lightweight CMU with fill insulation, U-Value: 0.689 W/(m² • °K)

gyp board
12 in (300 mm) lightweight CMU with fill insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
• °K)/W
12 in heavyweight concrete, R-19 batt

U-Value: 0.266 W/(m² • °K)

12 in (300 mm) heavyweight concrete, R-19 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
block °K)
°K)
• °K)/W

12 in (300 mm) heavyweight concrete [Source: ASHRAE]
Value Heat
resistance (m²
°K)/W
resistance (m²
)/
R-0 8 in CMU wall U-Value: 6.452772 W/(m² • °K)

ASHRAE 90.1 compliant R0 concrete or block wall [Source: GBS]
Value Heat
(m² 140lb 8 in (CC05) (20.3cm) • °K)/W • °K) kg/m³ J/(kg • °K)

ASHRAE 90.1 compliant R20 concrete or block wall [Source: GBS]
Value Heat
MinBd 3 in R-10.4 R-10.4 MinBd 3 in (7.6 cm) 1.83437 0.076196 m 0.041538 W/(m 240.300000 711.756000
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
R-0 wood frame wall U-Value: 1.912221 W/(m² • °K)

ASHRAE 90.1 compliant R0 16 in (400 mm) on center wood framed wall [Source: GBS]
Value Heat
Face brick 4 in (BK05) 4 in (10.1cm) face brick 0.07747 (m² 0.101585 1.311205 W/(m 2082.600000 921.096000
m • °K) kg/m³ J/(kg • °K)
°K)/W
Bldg paper felt (BP01) Permeable felt 0.01057 (m² - - - -
• °K)/W
Wood Sft 3/4 in Wood Sft 3/4 in (1.9 cm) 0.16501 (m² 0.115440 W/(m 512.640000 1381.644000
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
Minwool batt R0 w/ Batt, R-0 including framing 0.17083 (m² - - -
- 2x4 frame factor
• °K)/W
GypBd 5/8 in (GP02) GypBd 5/8 in (1.6 cm) 0.09908 (m² 0.015879 0.160266 W/(m 801.000000 837.360000
m • °K) kg/m³ J/(kg • °K)
°K)/W
R-11.4 8 in CMU wall U-Value: 0.486022 W/(m² • °K)

ASHRAE 90.1 compliant R11.4 concrete or block wall [Source: GBS]
Value Heat
Minwool Fill 3 1/2 in R11 Fill, 3 1/2 in (8.9 cm) 1.90255 0.088906 m 0.046730 W/(m 9.612000 837.360000
(m² R11 (IN11) • °K)/W • °K) kg/m³ J/(kg • °K)
R-13 + R10 metal frame wall U-Value: 0.331646 W/(m² • °K)

ASHRAE 90.1 compliant R13 + R10 sheathing 16 in (400 mm) on center metal framed wall [Source: GBS]
Value Heat
(m² • °K) kg/m³ J/(kg • °K)
• °K)/W
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
Minwool batt R13 w/ Batt, R-11 including mtl 0.82877 - - - -
Mtl frame framing factor (m² •
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
R-13 + R13 metal frame wall U-Value: 0.281630 W/(m² • °K)

ASHRAE 90.1 compliant R13 + R13 exterior 16 in (400 mm) on center metal framed wall [Source: GBS]
Value Heat
Face brick 4 in (BK05) 4 in (10.1cm) face brick 0.07747 (m² 0.101585 m 2082.600000 921.096000
1.311205 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
MinBd 7/8 in R-3 R-3.0 MinBd 7/8 in (2.2 cm) 0.53491 (m² 0.022219 m 240.300000 711.756000
0.041538 W/(m (N21) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
Wood Sft 3/4 in Wood Sft 3/4 in (1.9 cm) 0.16501 (m² 0.019049 m 512.640000 1381.644000
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)/W
GypBd 5/8 in (GP02) GypBd 5/8 in (1.6 cm) 0.09908 (m² 0.015879 m 801.000000 837.360000
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
R-13 + R3.8 wood frame wall U-Value: 0.368868 W/(m² • °K)

ASHRAE 90.1 compliant R13 + R3.8 sheathing 16 in (400 mm) on center wood framed wall [Source: GBS]
Value Heat
1.311205 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
Polystyrene 1 in Polystyrene 1 in (25 mm) 0.73347 (m² 0.025389 m 28.836000 1214.172000
0.034615 W/(m (IN33) • °K)/W • °K) kg/m³ J/(kg • °K)
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
- 2x4 frame factor • °K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
R-13 + R7.5 wood frame wall U-Value: 0.290248 W/(m² • °K)

ASHRAE 90.1 compliant R13 + R7.5 sheathing 16 in (400 mm) on center wood framed wall [Source: GBS]
Value Heat
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
Polystyrene 2 in Polystyrene 2 in (3.1 cm) 1.4678033 0.050808 m 0.034615 W/(m 28.836000 1214.172000
(IN35) • °K)/W • °K) kg/m³ J/(kg • °K)
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
2x4 frame factor • °K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
R-13.3 8 in concrete U-Value: 0.410167 W/(m² • °K)

ASHRAE 90.1 compliant R13.3 concrete [Source: GBS]
Value Heat
°K)/W
Cellulose 3 1/2 in R- Cellulose 3 1/2 in (8.9 cm) 2.28304 0.088906 m 0.038942 W/(m 48.060000 1381.644000
13 (IN13) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
°K)/W
MinBd 2 in R-7 (IN23) R-7.0 MinBd 2 in (50 mm) 1.22317 0.050808 m 0.041538 W/(m 240.300000 711.756000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
°K)/W
Roof Insul 2 in (IN74) Roof Insul 2 in (3.1 cm) 0.97854 0.050808 m 0.051922 W/(m 256.320000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
R7.6 8 in concrete U-Value: 0.725613 W/(m² • °K)

Value Heat
°K)/W
MinBd 2 in R-7 (IN23) R-7.0 MinBd 2 in (50 mm) 1.22317( 0.050808 m 0.041538 W/(m 240.300000 711.756000
• °K)/W • °K) kg/m³ J/(kg • °K)
R9.5 8 in concrete U-Value: 0.932435 W/(m² • °K)

Value Heat
°K)/W
Polystyrene 1 1/4 in Polystyrene 1 1/4 in (3.2 0.91749 0.031759 m 0.034615 W/(m 28.836000 1214.172000
(IN34) cm) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
R-0 8 in CMU under ground wall U-Value: 0.179987 W/(m² • °K)

ASHRAE 90.1 compliant underground wall with proxy soil and insulation layer [Source: GBS]
Value Heat
UG surface fictitious Fictitious insulation place 5.2833` (m² • - - -
- insulation holder °K)/W
Soil 8 in Soil 8 in (20.3 cm) 0.11799 (m² 0.204206 m 1842.300000 837.360000
1.730735 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Conc heavyweight Conc heavyweight 140lb 8 in 0.15497 (m² 0.203200 m 2242.800000 837.360000
1.311205 W/(m 140lb 8 in (CC05) (20.3cm) • °K)/W kg/m³ J/(kg • °K)
• °K)
R7.5 8 in CMU under ground wall U-Value: 0.179987 W/(m² • °K)

ASHRAE 90.1 compliant R7.5 concr. or block underground wall w/ soil layer and insulation layer [Source: GBS]
Value Heat
UG surface fictitious Fictitious insulation place 5.28331 (m² • - - -
- insulation holder °K)/W
1.730735 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)

ASHRAE 90.1 compliant R19 sheathing 16 in (400 mm) on center wood framed wall [Source: GBS]
Value Heat
Wood shingle (WS01) For walls 0.15392 (m² 0.017769 m 512.640000 1256.040000
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
2x6 frame factor (m² •
°K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

Value Heat
Wood shingle (WS01) For walls 0.15392 0.017769 m 0.115440 W/(m 512.640000 1256.040000
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
Polyurethane 1/2 in Polyurethane 1/2 in (1.3 0.55215 0.012710 m 0.023019 W/(m 24.030000 1590.984000
(IN41) cm) • °K)/W • °K) kg/m³ J/(kg • °K)
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

Value Heat
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

Value Heat
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
Insul Bd 3 in (HF-B4) Insul Bd 3 in (7.6 cm) 1.76102 0.076196 m 0.043268 W/(m 32.040000 837.360000
°K)/W • °K) kg/m³ J/(kg • °K)
(IN31) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN32) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)
R-2.7 8 in CMU under ground wall U-Value: 1.214657 W/(m² • °K)

Value Heat
1.730735 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Polystyrene 3/4 in Polystyrene 3/4 in (1.9 cm) 0.55031 (m² 0.019049 m 28.836000 1214.172000
0.034615 W/(m (IN32) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)
R-4 8 in CMU under ground wall U-Value: 0.993618 W/(m² • °K)

Value Heat
1.730735 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.034615 W/(m (IN33) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)

Value Heat
1.730735 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Polystyrene 1 1/4 in Polystyrene 1 1/4 in (3.2 0.91749 (m² 0.031759 m 28.836000 1214.172000
0.034615 W/(m (IN34) cm) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)
R8.1 8 in CMU under ground wall U-Value: 0.574460 W/(m² • °K)

Value Heat
• °K)/W • °K) kg/m³ J/(kg • °K)
(IN35) • °K)/W • °K) kg/m³ J/(kg • °K)
140lb 8 in (CC05) (20.3cm) • °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
1.730735 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)

Value Heat
1.730735 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Polystyrene 3 in Polystyrene 3 in (7.6 cm) 2.20124 (m² 0.076196 m 28.836000 1214.172000
0.034615 W/(m (IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)

Value Heat
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
R-19 8 in concrete U-Value: 0.243826 W/(m² • °K)

ASHRAE 90.1 compliant R19 concrete wall R = 23.29, U = 0.0429 [Source: GBS]
Value Heat
Conc heavyweight Conc heavyweight 140lb 8 in 0.15497 (m² 0.203200 1.311205 W/(m 2242.800000 837.360000
140lb 8 in (CC05) (20.3cm) • °K)/W • °K) kg/m³ J/(kg • °K)
MinBd 1 in R-3 (IN22) R-3.5 MinBd 1 in (2.5 cm) 0.61122 0.025389 m 0.041538 W/(m 240.300000 711.756000
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
Air Lay < 3/4 in Vert Air space in vertical walls 0.15850 - - - -
(AL11) • °K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
Minwool batt R19 Batt, R-19 15.57 cm 3.59813 0.155684 m 0.043268 W/(m 9.612000 837.360000
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

ASHRAE 90.1 compliant R11.4 concrete R=10.78 [Source: GBS]
Value Heat
(m² (IN35) • °K)/W • °K) kg/m³ J/(kg • °K)
Air Lay < 3/4 in Vert Air space in vertical walls - - - -
0.15850 (m² (AL11) •
°K)/W
GypBd 3/4 in (GP03) GypBd 3/4 in (1.9 cm) 0.11886 (m² 0.019049 m 0.160266 W/(m 801.000000 837.360000
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(AL11) (m²
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(m² (IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
Air Lay < 3/4 in Vert Air space in vertical walls - - - -
0.15850 (m² (AL11) •
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
R-13+3.8 wood frame wall U-Value: 0.378982 W/(m² • °K)

ASHRAE 90.1 compliant R13+3.8 sheathing 16 in (400 mm) on center wood framed wall [Source: GBS]
Value Heat
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
Insul Bd 1 in (HF-B5) Insul Bd 1 in (2 1/2 cm) 0.58466 (m² 0.025297 m 91.314000 837.360000
0.043268 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
R-13+7.5 wood frame wall U-Value: 0.291233 W/(m² • °K)

ASHRAE 90.1 compliant R13+7.5 sheathing 16 in (400 mm) on center wood framed wall [Source: GBS]
Value Heat
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
Polyurethane 1 1/4 in Polyurethane 1 1/4 in (3.2 1.37969 (m² 0.031759 m 24.030000 1590.984000
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
R-0 metal frame wall U-Value: 3.253685 W/(m² • °K)
R0 16 in (400 mm) on center metal framed wall, typical for interior walls [Source: GBS]
Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
- or no
m • °K) kg/m³ J/(kg • °K)
°K)/W
R9 curtain wall U-Value: 0.578705 W/(m² • °K)

R9 curtain wall [Source: GBS]
Value Heat
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
R-11 UG ex-wall U-Value: 0.497089 W/(m² • °K)

R11 UG ex-wall [Source: GBS]
Value Heat
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
R-30 8 in concrete U-Value: 0.168604 W/(m² • °K)

8 in (200 mm) concrete wall with R30 insulation [Source: GBS]
Value Heat
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(AL11) (m²
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
8 in concrete wall with perlite filled cores U-Value: 0.971834 W/(m² • °K)
8 in (200 mm) concrete wall with perlite filled cores [Source: GBS]
Value Heat
CMU MW 8 in PerlFill Perlite filled 8 in (20.3 cm) 1.02898 0.203200 m 0.197477 W/(m 897.120000 837.360000
(m² (CB33) • °K)/W • °K) kg/m³ J/(kg • °K)
8 in concrete wall with poured cores U-Value: 4.222068 W/(m² • °K)

8 in (200 mm) concrete wall with poured cores [Source: GBS]
Value Heat
CMU MW 8 in ConcFill Concrete filled 8 in (20.3 0.23685 0.203200 m 0.857925 W/(m 1970.460000 837.360000
(m² (CB32) cm) • °K)/W • °K) kg/m³ J/(kg • °K)
8 in concrete wall hollow U-Value: 3.301339 W/(m² • °K)

8 in (200 mm) concrete wall hollow [Source: GBS]
Value Heat
CMU MW 8 in hollow Hollow 8 in (20.3 cm) 0.30291 0.203200 m 0.670833 W/(m 849.060000 837.360000
(CB31) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
8 in CMU with concrete poured concrete U-Value: 2.312985 W/(m² • °K)

8 in (200 mm) concrete wall with concrete poured cores R = 2.45, U = 0.408 [Source: GBS]
Value Heat
CMU heavyweight 8 in Concrete filled 8 in (20.3 0.15499 (m² 0.203200 m 2242.800000 837.360000
1.311032 W/(m ConcFill (CB12) cm) • °K)/W • °K) kg/m³ J/(kg • °K)
Air Lay < 3/4 in Vert Air space in vertical walls 0.15850 (m² - - -
- (AL11) • °K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
8 in CMU with perlite poured concrete U-Value: 1.259280 W/(m² • °K)

8 in (200 mm) concrete wall with concrete poured cores R = 4.5, U = 0.222 [Source: GBS]
Value Heat
CMU heavyweight 8 in Perlite filled 8 in (20.3 cm) 0.51676 (m² 0.203200 m 1121.400000 837.360000
0.393223 W/(m PerlFill (CB13) • °K)/W • °K) kg/m³ J/(kg • °K)
Air Lay < 3/4 in Vert Air space in vertical walls 0.15850 (m² - - -
- (AL11) • °K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Straw bale wall U-Value: 0.186824 W/(m² • °K)
Straw bale, 3-string, 23 in (600 mm), R30 [Source: GBS]
Value Heat
Stucco 1 in (SC01) Stucco 1 in (25 mm) 0.03520 0.025389 m 0.721197 W/(m 2659.320000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Straw bale Straw bale, 3-string, 23 inch 5.2822 0.584182 m 0.110594 W/(m 112.140000 1339.776000
(600 mm) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Insulated concrete form (ICF) wall, 10"

U-Value: 0.207854 W/(m² • °K)
thick form
Insulated concrete form (ICF) wall, 10" thick form [Source: GBS]
Value Heat
Stucco 1 in (SC01) Stucco 1 in (25 mm) 0.03502 (m² 0.025389 m 0.721197 W/(m 2659.320000 837.360000
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(m² (IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
ConcLW 80lb 4 in ConcLW 80lb 4 in (10.2 cm) 0.101585 m 0.360512 W/(m 1281.600000 837.360000
0.28178 (m² (CC24) • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² (IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)

U-Value: 0.205809 W/(m² • °K)
thick form
Value Heat
Stucco 1 in (SC01) Stucco 1 in (25 mm) 0.03520 (m² 0.025389 m 0.721197 W/(m 2659.320000 837.360000
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(m² (IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
ConcLW 80lb 6 in ConcLW 80lb 6 in (15.2 cm) 0.152393 m 0.360512 W/(m 1281.600000 837.360000
0.422712.4 (m² (CC25) • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² (IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)

U-Value: 0.196824 W/(m² • °K)
thick form
Value Heat
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
ConcLW 80lb 8 in ConcLW 80lb 8 in (20.2 cm) 0.56364 0.203200 m 0.360512 W/(m 1281.600000 837.360000
(CC26) • °K)/W • °K) kg/m³ J/(kg • °K)
Polystyrene 3 in Polystyrene 3 in (7.6 cm) 2.20124.5 0.076196 m 0.034615 W/(m 28.836000 1214.172000
(IN36) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)
Structurally ins. panel (SIP) wall 4 1/2 in U-Value: 0.384404 W/(m² • °K)
(114 mm)
Structurally insulated panel (SIP) wall 4 1/2 in (114 mm) thick, 48 in o.c., R-14 insulation [Source: GBS]
Value Heat
Stucco 1 in (SC01) Stucco 1 in (25 mm) 0.03520 (m² 0.025389 m 2659.320000 837.360000
0.721197 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
Plywd 5/8 in (PW04) Plywd 5/8 in (1.6 cm) 0.13755 (m² 0.015879 m 544.680000 1214.172000
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Polystyrene 3 1/2 in Polystyrene 3 1/2 in (90 2.20138 (m² - - -
- w/ 48 in oc SIP wall mm) including SIP wall
• °K)/W
frame frame factor
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Structurally ins. panel (SIP) 6 1/2 in (162 mm) wall, 48 in o.c., R-22 insulation [Source: GBS]
Value Heat
0.721197 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
- w/48 in oc SIP wall mm) including SIP wall
• °K)/W
frame frame factor
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
(210 mm)
Structurally ins. panel (SIP) wall 8 1/4 in (210 mm)thick, 48 in o.c., R-28 insulation [Source: GBS]
Value Heat
0.721197 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
frame frame factor
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Structurally ins. panel (SIP) wall 10 1/4

U-Value: 0.180430 W/(m² • °K)
in (260 mm)
Structurally ins. panel (SIP) wall 10 1/4 in (260 mm)thick, 48 in o.c., R-36 insulation [Source: GBS]
Value Heat
0.721197 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
frame frame factor
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Structurally ins. panel (SIP) wall 12 1/4

U-Value: 0.152354 W/(m² • °K)
in (311 mm)
Structurally ins. panel (SIP) wall 12 1/4 in (311 mm) thick, 48 in o.c., R-44 insulation [Source: GBS]
Value Heat
0.721197 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Polystyrene 11 1/4 in Polystyrene 11 1/4 in (290 6.16386 (m² • - - -
°K)/W
frame frame facto
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W • °K) kg/m³ J/(kg • °K)
R-2 CMU wall U-Value: 1.414207 W/(m² • °K)

2001 title 24 90.1 compliant R2 mass wall [Source: GBS]
Value Heat
°K)/W
Polyurethane 1/2 in Polyurethane 1/2 in (1.3 0.55215 0.012710 m 0.023019 W/(m 24.030000 1590.984000
(IN41) cm) (m² • °K) kg/m³ J/(kg • °K)
°K)/W

2001 title 24 compliant R13 16 in (400 mm) on center wood framed wall [Source: GBS]
Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
- 2x4 frame factor
• °K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W

2001 title 24 compliant R11 16 in (400 mm) on center metal framed wall [Source: GBS]
Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W
°K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W
Minwool batt R15 w/ Batt, R-11 including mtl 0.86646 (m² - - -
- Mtl frame framing
factor • °K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W
°K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W
Insul Bd 3 in (HF-B4) Insul Bd 3 in (7.6 cm) 1.76102 (m² • 0.076196 0.043268 W/(m 32.040000 837.360000
m • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W
R-13+R13 metal frame wall U-Value: 0.542130 W/(m² • °K)

2001 title 24 compliant R13+R13 16 in (400 mm) on center metal framed wall [Source: GBS]
Value Heat
1.311205 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
°K)/W
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
R-15+R15 metal frame wall U-Value: 0.520848 W/(m² • °K)

2001 title 24 compliant R15+R15 16 in (400 mm) on center metal framed wall [Source: GBS]
Value Heat
1.311205 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
- Mtl frame framing factor
• °K)/W
- Mtl frame framing factor
• °K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

Value Heat
m • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W
R19 (IN12) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W
R-13+3.8 metal frame wall U-Value: 0.624802 W/(m² • °K)

2001 title 24 compliant R13+3.8 16 in (400 mm) on center metal framed wall [Source: GBS]
Value Heat
1.311205 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
Insul Bd 1 in (HF-B5) Insul Bd 1 in (2 1/2 cm) 0.58466 (m² 0.025297 m 91.314000 837.360000
0.043268 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
R-13+7.5 metal frame wall U-Value: 0.417444 W/(m² • °K)

2001 title 24 compliant R13+7.5 16 in (400 mm) on center metal framed wall [Source: GBS]
Value Heat
1.311205 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
Polyurethane 1 1/4 in Polyurethane 1 1/4 in (3.2 1.37969 (m² 0.031759 m 24.030000 1590.984000
°K)/W
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

2004 Oregon compliant U 0.3 (R-3)mass wall [Source: GBS]
Value Heat
°K)/W
(IN32) (m² • °K) kg/m³ J/(kg • °K)
°K)/W

2004 Oregon compliant U 0.21 (R-4) mass wall [Source: GBS]
Value Heat
Polystyrene 1 in Polystyrene 1 in (25 mm) 0.73347 0.025389 m 0.034615 W/(m 28.836000 1214.172000
(m² (IN33) • °K)/W • °K) kg/m³ J/(kg • °K)
R-6 8 in concrete block U-Value: 0.794961 W/(m² • °K)

2004 Oregon compliant U 0.16 (R-6) mass wall. 8 in (200 mm) concrete block (CMU) [Source: GBS]
Value Heat
• °K)
Polyurethane 1 in Polyurethane 1 in (25 mm) 1.10296 (m² 0.025389 m 24.030000 1590.984000
0.023019 W/(m (IN43) • °K)/W • °K) kg/m³ J/(kg • °K)
2 ft stone, 2 in airspace, 1 in dense

U-Value: 1.23 W/(m² • °K)
plaster
2 ft (600 mm) stone, 2 in (50 mm) airspace, 1 in (25 mm) dense plaster [Source: CIBSE]
Value Heat
Hard stone Hard stone (unspecified) - 0.600 m 3.49 W/(m • °K) 2880 kg/m³ 840 J/(kg •
(unspecified) °K)
• °K)/W
Plaster (dense) Plaster (dense) - 0.025 m 0.5 W/(m • °K) 1300 kg/m³ 1000 J/(kg •
°K)
Stone, insulation, plasterboard U-Value: 0.65 W/(m² • °K)

2 ft (600 mm) stone, 2 in (50 mm) airspace, 1 in (25 mm) EPS insulation, 1/2 in (12 mm) plasterboard on battens [Source: CIBSE]
Value Heat
Hard stone Hard stone (unspecified) - 0.600 m 3.49 W/(m • °K) 2880 kg/m³ 840 J/(kg •
(unspecified) °K)
External wall airspace External wall airspace 0.18000 (m² 0.050 m - W/(m • °K) - kg/m³
- J/(kg • °K)
°K)/W
(EPS) °K) °K)
°K)
Render, no-fines concrete, plasterboard U-Value: 1.50 W/(m² • °K)

3/4 in (19 mm) render, 9 in (225 mm) no-fines concrete, 2 in (50 mm) airspace, 1/2 in (12 mm) plasterboard on battens [Source: CIBSE]
Value Heat
°K)
No-fines concrete No-fines concrete - 0.220 m 0.96 W/(m • °K) 1800 kg/m³ 840 J/(kg •
°K)
- J/(kg • °K)
°K)/W
°K)
Render, no-fines concrete, insulation,

U-Value: 0.52 W/(m² • °K)
plasterboard
3/4 in (19 mm) render, 9 in (225 mm) no-fines concrete, 2 in (50 mm) mineral fiber insulation between battens, 1/2 in (12 mm)
plasterboard on battens [Source: CIBSE]
Value Heat
°K)
°K)
Mineral fiber Mineral fiber insulation - 0.050 m 0.035 W/(m • 30 kg/m³ 1000 J/(kg •
°K)
Render, mineral fiber insulation, no-fines U-Value: 0.48 W/(m² • °K)

concrete, plasterboard
3/4 in (19 mm) render, 2 in (50 mm) mineral fiber insulation between battens, 9 in (225 mm) no-fines concrete, 2 in (50 mm) airspace, 1/2
in (12 mm) plasterboard on battens [Source: CIBSE]
Value Heat
°K)
°K)
• °K)/W
°K)
9 in solid brick, 1/2 in dense plaster U-Value: 2.14 W/(m² • °K)

9 in (225 mm) solid brick, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
(dense) °K)
9 in solid brick, 1/2 in plasterboard U-Value: 1.43 W/(m² • °K)

9 in (225 mm) solid brick, 2 in (50 mm) airspace, 1/2 in (12 mm) plasterboard on battens [Source: CIBSE]
Value Heat
°K)
External wall airspace External wall airspace 0.18000 (m² 0.050 m - - kg/m³ - J/(kg • °K)
W/(m • °K)
°K)/W
°K)
9 in solid brick, mineral fiber insulation,

U-Value: 0.51 W/(m² • °K)
plasterboard
9 in (225 mm) solid brick, 2 in (50 mm) mineral fiber insulation between battens, 1/2 in (12 mm) plasterboard on battens [Source: CIBSE]
Value Heat
°K)
°K)
Render, insulation, solid brick, dense

U-Value: 0.49 W/(m² • °K)
plaster
3/4 in (19 mm) render, 2 in (50 mm) EPS insulation, 9 in (225 mm) solid brick, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
2 in Expanded 2 in (50 mm) Expanded - 0.050 m 0.035 W/(m • 25 kg/m³ 1400 J/(kg •
polystyrene (EPS) polystyrene (EPS) °K) °K)
°K)
(dense) °K)
Render, dense concrete block, dense

U-Value: 2.73 W/(m² • °K)
plaster
3/4 in (19 mm) render, 8 in (200 mm) dense concrete block, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
Concrete block Concrete block (dense) - 0.200 m 1.63 W/(m • °K) 2300 kg/m³ 1000 J/(kg •
(dense) °K)
(dense) °K)
Render, dense concrete block,

U-Value: 1.68 W/(m² • °K)
plasterboard
3/4 in (19 mm) render, 8 in (200 mm) dense concrete block, 2 in (50 mm) airspace, 1/2 in (12 mm) plasterboard on battens [Source:
CIBSE]
Value Heat
°K)
(dense) °K)
- J/(kg • °K)
°K)/W
°K)
Render, dense concrete block, insulation, U-Value: 0.71 W/(m² • °K)

plasterboard
3/4 in (19 mm) render, 8 in (200 mm) dense concrete block, 1 in (25 mm) polyurethane insulation, 1/2 in (12 mm) plasterboard on battens
[Source: CIBSE]
Value Heat
°K)
(dense) °K)
°K)
Render, insulation, dense concrete block, U-Value: 0.56 W/(m² • °K)
dense plaster
3/4 in (19 mm) render, 2 in (50 mm) mineral fiber insulation between battens, 8 in (200 mm) dense concrete block, 1/2 in (12 mm) dense
plaster [Source: CIBSE]
Value Heat
°K)
(dense) °K)
(dense) °K)
Dense concrete, 1 in insulation, dense

U-Value: 0.95 W/(m² • °K)
concrete, dense plaster
3 in (75 mm) dense concrete, 1 in (25 mm) EPS insulation, 4 in (100 mm) dense concrete, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
Dense concrete Dense concrete - 0.080 m 1.70 W/(m • °K) 2200 kg/m³ 840 J/(kg •
°K)
(EPS) °K) °K)
4 in dense concrete 4 in (100 mm) dense - 0.100 m 1.70 W/(m • °K) 2200 kg/m³ 840 J/(kg •
concrete °K)
(dense) °K)

U-Value: 0.78 W/(m² • °K)
3 in (75 mm) dense concrete, 1 in (25 mm) EPS insulation, 4 in (100 mm) dense concrete, 2 in (50 mm) airspace, 1/2 in (12 mm)
plasterboard on battens [Source: CIBSE]
Value Heat
°K)
(EPS) °K) °K)
concrete °K)
- J/(kg • °K)
°K)/W
°K)

U-Value: 0.55 W/(m² • °K)
3 in (75 mm) dense concrete, 2 in (50 mm) EPS insulation, 4 in (100 mm) dense concrete, 1/2 in (12 mm) plasterboard [Source: CIBSE]
Value Heat

°K)
concrete °K)
°K)
Render, dense concrete, insulation,

U-Value: 0.56 W/(m² • °K)
dense concrete, dense plaster
3/4 in (19 mm) render, 3 in (75 mm) dense concrete, 2 in (50 mm) EPS insulation, 4 in (100 mm) dense concrete, 1/2 in (12 mm) dense
Value Heat
°K)
°K)
concrete °K)
(dense) °K)
Brick, air, brick, dense plaster U-Value: 1.47 W/(m² • °K)

4 in (100 mm) brick, 2 in (50 mm) airspace, 4 in (100 mm) brick, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
External wall airspace External wall airspace 0.18000 (m² 0.050 m - W/(m • °K) - J/(kg • °K)
- kg/m³
°K)/W
°K)
(dense) °K)
Brick, air, brick, light-weight plaster U-Value: 1.36 W/(m² • °K)

4 in (100 mm) brick, 2 in (50 mm) airspace, 4 in (100 mm) brick, 1/2 in (12 mm) lightweight plaster [Source: CIBSE]
Value Heat
°K)
External wall airspace External wall airspace 0.18000 (m² 0.050 m - W/(m • °K) - J/(kg • °K)
- kg/m³
°K)/W
°K)
°K)
Brick, foam insulation, brick, dense
U-Value: 0.57 W/(m² • °K)
plaster
4 in (100 mm) brick, 2 in (50 mm) UF foam insulation, 4 in (100 mm) brick, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
°K)
(dense) °K)
Brick, blown fiber insulation, brick, dense U-Value: 0.57 W/(m² • °K)
plaster
4 in (100 mm) brick, 2 in (50 mm) blown fiber insulation, 4 in (100 mm) brick, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
Blown fiber insulation Blown fiber insulation - 0.050 m 0.040 W/(m • 12 kg/m³ 840 J/(kg •
°K) °K)
°K)
(dense) °K)
Brick, polystyrene insulation, brick,

U-Value: 0.79 W/(m² • °K)
plasterboard
4 in (100 mm) brick, 1 in (25 mm) EPS insulation, 4 in (100 mm) brick, 1/2 in (12 mm) plasterboard on battens [Source: CIBSE]
Value Heat
°K)
(EPS) °K) °K)
°K)
°K)
Brick, air, dense concrete block, dense

U-Value: 1.75 W/(m² • °K)
plaster
4 in (100 mm) brick, 2 in (50 mm) airspace, 4 in (100 mm) dense concrete block, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
- J/(kg • °K)
• °K)/W
concrete °K)
(dense) °K)
Brick, foam insulation, dense concrete

U-Value: 0.61 W/(m² • °K)
block, dense plaster
4 in (100 mm) brick, 2 in (50 mm) urea formaldehyde (UF) foam insulation, 4 in (100 mm) dense concrete block, 1/2 in (12 mm) dense
Value Heat
°K)
concrete °K)
(dense) °K)
Brick, blown fiber insulation, dense

U-Value: 0.61 W/(m² • °K)
4 in (100 mm) brick, 2 in (50 mm) blown fiber insulation, 4 in (100 mm) dense concrete block, 1/2 in (12 mm) dense plaster [Source:
CIBSE]
Value Heat
°K)
°K) °K)
concrete °K)
(dense) °K)
Brick, polystyrene insulation, dense

U-Value: 0.55 W/(m² • °K)
4 in (100 mm) brick, 2 in (50 mm) EPS insulation, 4 in (100 mm) dense concrete block, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
°K)
concrete °K)
(dense) °K)
Brick, air, light-weight concrete block,

U-Value: 0.96 W/(m² • °K)
dense plaster
4 in (100 mm) brick, 2 in (50 mm) airspace, 4 in (100 mm) lightweight aggregate concrete block, 1/2 in (12 mm) dense plaster [Source:
CIBSE]
Value Heat
°K)
• °K)/W
Lightweight aggregate Lightweight aggregate - 0.100 m 0.19 W/(m • °K) 600 kg/m³ 1000 J/(kg •
(dense) °K)
Brick, foam insulation, light-weight

U-Value: 0.47 W/(m² • °K)
4 in (100 mm) brick, 2 in (50 mm) UF foam insulation, 4 in (100 mm) lightweight aggregate concrete block, 1/2 in (12 mm) dense plaster
[Source: CIBSE]
Value Heat
°K)
(dense) °K)
Brick, fiber insulation, light-weight

U-Value: 0.47 W/(m² • °K)
4 in (100 mm) brick, 2 in (50 mm) blown fiber insulation, 4 in (100 mm) lightweight aggregate concrete block, 1/2 in (12 mm) dense
Value Heat
°K)
°K) °K)
(dense) °K)
Brick, fiber insulation, light-weight

U-Value: 0.30 W/(m² • °K)
4 in (100 mm) brick, 4 in (100 mm) blown fiber insulation, 4 in (100 mm) lightweight aggregate concrete block, 1/2 in (12 mm) dense
Value Heat
°K)
4 in Blown fiber 4 in (100 mm) Blown fiber - 0.100 m 0.040 W/(m • 12 kg/m³ 840 J/(kg •

(dense) °K)
Brick, polystyrene insulation, light-

U-Value: 0.44 W/(m² • °K)
weight concrete, dense plaster
4 in (100 mm) brick, 2 in (50 mm) EPS insulation, 4 in (100 mm) lightweight aggregate concrete block, 1/2 in (12 mm) dense plaster
[Source: CIBSE]
Value Heat
°K)
(dense) °K)
Brick, air, plywood sheathing, studding,

U-Value: 1.13 W/(m² • °K)
plasterboard
4 in (100 mm) brick, 2 in (50 mm) airspace, 3/4 in (19 mm) plywood sheathing, 4 in (100 mm) studding, 1/2 in (12 mm) plasterboard
[Source: CIBSE]
Value Heat
°K)
- J/(kg • °K)
°K)/W
Plywood Sheathing Plywood Sheathing - 0.019 m 0.14 W/(m • °K) 530 kg/m³ 1800 J/(kg •
°K)
Timber studding Timber studding - 0.095 m 0.14 W/(m • °K) 650 kg/m³ 1200 J/(kg •
°K)
1/2 in plasterboard 1/2 in (12 mm) plasterboard - 0.013 m 0.16 W/(m • °K) 950 kg/m³ 840 J/(kg •
°K)
1/2 in dense plaster, 8 in brick, 1/2 in

U-Value: 1.57 W/(m² • °K)
dense plaster
1/2 in (12 mm) dense plaster, 8 in (200 mm) brick, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
(dense) °K)
°K)
(dense) °K)
1/2 in dense plaster, dense concrete

U-Value: 2.36 W/(m² • °K)
block, 1/2 in dense plaster
1/2 in (12 mm) dense plaster, 8 in (200 mm) dense concrete block, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
(dense) °K)
(dense) block (dense) °K)
(dense) °K)
Brick, polystyrene insulation, light-

U-Value: 0.57 W/(m² • °K)
weight concrete, dense plaster
4 in (100 mm) brick, 1 in (25 mm) airspace, 1 in (25 mm) EPS insulation, 4 in (100 mm) lightweight aggregate concrete block, 1/2 in (12
mm) dense plaster [Source: CIBSE]
Value Heat
°K)
1 in external wall 1 in (25 mm) external wall 0.18000 (m² 0.025 m - W/(m • °K) - kg/m³
- J/(kg • °K) airspace airspace • °K)/W
(EPS) °K) °K)
(dense) °K)
Brick, 4 in autoclaved aerated concrete

U-Value: 1.07 W/(m² • °K)
block, light-weight plaster
4 in (100 mm) brick, 2 in (50 mm) airspace, 4 in (100 mm) autoclaved aerated concrete block (density 700 kgm3), 1/2 in (12 mm)
lightweight plaster [Source: CIBSE]
Value Heat
°K)
- J/(kg • °K)
°K)/W
Autoclaved Aerated Autoclaved Aerated concrete - 0.100 m 0.27 W/(m • °K) 700 kg/m³ 1050 J/(kg •
concrete block block (density 700) °K)
(density 700)
°K)
Brick, 6 in autoclaved aerated concrete

U-Value: 0.71 W/(m² • °K)
block, light-weight plaster
4 in (100 mm) brick, 2 in (50 mm) airspace, 6 in (150 mm) autoclaved aerated concrete (AAC) block (density 500 kgm3), 1/2 in (12 mm)
lightweight plaster [Source: CIBSE]
Value Heat
°K)
- J/(kg • °K)
°K)/W

(density 500)
°K)
Brick, insulation, autoclaved aerated

U-Value: 0.47 W/(m² • °K)
concrete block, plaster
4 in (100 mm) brick, 1 in (25 mm) airspace, 1 in (25 mm) EPS insulation, 6 in (150 mm) autoclaved aerated concrete block (density500
kgm), 1/2 in (12 mm) lightweight plaster [Source: CIBSE]
Value Heat
°K)
(EPS) °K) °K)
(density 500)
°K)
Brick, plywood, studding, 4 in insulation,

U-Value: 0.29 W/(m² • °K)
plasterboard
4 in (100 mm) brick, 2 in (50 mm) airspace, 3/4 in (19 mm) plywood sheathing, 4 in (100 mm) studding, 4 in (100 mm) mineral fiber
insulation between studs, 1/2 in (12 mm) plasterboard [Source: CIBSE]
Value Heat
°K)
- J/(kg • °K)
°K)/W
°K)
°K)
°K)
Brick, plywood, studding, 6 in insulation,

U-Value: 0.21 W/(m² • °K)
plasterboard
4 in (100 mm) brick, 2 in (50 mm) airspace, 3/4 in (19 mm) plywood sheathing, 6 in (150 mm) studding, 6 in (150 mm) mineral fiber
insulation between studs, 1/2 in (12 mm) plasterboard [Source: CIBSE]
Value Heat
°K)
- J/(kg • °K)
°K)/W
°K)
6 in timber studding 6 in (150 mm) timber - 0.140 m 0.14 W/(m • °K) 650 kg/m³ 1200 J/(kg •
studding °K)
°K)
Plasterboard, concrete block, air,

U-Value: 0.62 W/(m² • °K)
concrete block, plasterboard
1/2 in (12 mm) plasterboard on battens, 4 in (100 mm) lightweight aggregate concrete block, 3 in (75 mm) airspace, 4 in (100 mm)
lightweight aggregate concrete block, 1/2 in (12 mm) plasterboard on battens [Source: CIBSE]
Value Heat
°K)
°K)
Floors
Wilton carpet on concrete U-Value: 1.2908 W/(m² • °K)

1/2 in (12 mm) Wilton carpet, 1/2 in (12 mm) cellular rubber underlay, 2 in (50 mm) screed, 6 in (150 mm) cast concrete
Value Heat
Carpet Carpet - 0.0127 m 0.06 W/(m • °K) 288 kg/m³ 1380 J/(kg •
°K)
Cellulose 5 1/2 in R-20 Cellulose 5 1/2 in (13.4 3.58695 (m² 0.139683 m 0.038942 W/(m 48.060000 1381.644000
(IN14) cm) • °K)/W • °K) kg/m³ J/(kg • °K)
kg/m³ °K)
Timber flooring, gypsum U-Value: 1.8135 W/(m² • °K)

Ceiling, 3/8 in (10 mm) timber flooring, 8 in (200 mm) air, 5/8 in (16 mm) gypsum
Value Heat
Timber flooring Timber flooring - 0.1 m 0.14 W/(m • °K) 650 kg/m³ 1200 J/(kg •
°K)
Ceiling air space Ceiling air space 0.18000 (m² - - - -
• °K)/W • °K) kg/m³ J/(kg • °K)
Timber flooring, batting, gypsum U-Value: 0.8500 W/(m² • °K)

Ceiling, 3/8 in (10 mm) timber flooring, 8 in (200 mm) air, 1 in (25 mm) batt, 5/8 in (16 mm) gypsum
Value Heat
°K)
R-30, 9 1/2 in batt R-30, 9 1/2 in (240 mm) - 0.2438 m 0.05 W/(m • °K) 19 kg/m³ 960 J/(kg •
insulation batt insulation °K)
• °K)/W • °K) kg/m³ J/(kg • °K)
Timber flooring, batt, metal deck tray U-Value: 0.9290 W/(m² • °K)
Ceiling, 3/8 in (10 mm) timber flooring, 1 in (25 mm) air, 1 in (25 mm) batting, 1/16 in (2 mm) metal deck tray
Value Heat
°K)
Metal surface Metal surface - 0.002 m 45.28 W/(m • 7824 500 J/(kg •
°K) kg/m³ °K)
Timber flooring, joists, plasterboard

U-Value: 1.88 W/(m² • °K)
ceiling
3/4 in (19 mm) timber flooring or chipboard on 4 in (100 mm) joists, 1/2 in (12 mm) plasterboard ceiling
Value Heat
°K)
°K)
°K)
Loft floor - domestic A U-Value: 0.3596 W/(m² • °K)

Loft floor - domestic
Value Heat
°K)
Loft floor - domestic B U-Value: 0.2481 W/(m² • °K)

Loft floor - domestic
Value Heat
°K)
2 in heavyweight concrete floor deck U-Value: 4.3599 W/(m² • °K )

2 in (50 mm) heavyweight concrete floor deck
Value Heat
2 in heavyweight 2 in (50 mm) - 0.0508 m 1.95 W/(m • °K) 2240 900 J/(kg •
concrete heavyweight concrete kg/m³ °K)

Value Heat
2 in lightweight concrete floor deck U-Value: 3.7475 W/(m² • °K )

2 in (50 mm) lightweight concrete floor deck
Value Heat
2 in lightweight concrete 2 in (50 mm) lightweight - 0.051 m 0.53 W/(m • °K) 1280 840 J/(kg •
°K)

Value Heat
2 in wood deck U-Value: 1.6133 W/(m² • °K)

2 in (50 mm) wood deck
Value Heat
2 in wood 2 in (50 mm) wood - 0.0508 m 0.15 W/(m • °K) 608 kg/m³ 1630 J/(kg •
°K)
3 in wood deck U-Value: 1.2052 W/(m² • °K)

3 in (75 mm) wood deck
Value Heat
°K)
8 in lightweight concrete floor de ck U-Value: 1.3610 W/(m² • °K )

8 in (200 mm) lightweight concrete floor deck
Value Heat
8 in lightweight concrete 8 in (200 mm) - 0.2032 m 0.53 W/(m • °K) 1280 840 J/(kg •
lightweight concrete kg/m³ °K)
Passive floor, no insulation, tile or vinyl U-Value: 2.9582 W/(m² • °K )

Passive floor, no insulation, tile or vinyl [Source: CIBSE]
Value Heat
Slate or tile Slate or tile - 0.0127 m 1.59 W/(m • °K) 1920 1260 J/(kg •
kg/m³ °K)
No insulation No insulation 0.00001 - - - -
(m² •
°K)/W
Passive floor, no insulation, carpet or

U-Value: 2.1860 W/(m² • °K)
hardwood
Passive floor, no insulation, carpet or hardwood [Source: CIBSE]
Value Heat
°K)
(m² •
°K)/W
Passive floor, R-2 board insulation, any
U-Value: 1.3967 W/(m² • °K)
cover
Passive floor, R-2 board insulation, any cover [Source: CIBSE]
Value Heat
°K)
(m² •
°K)/W

U-Value: 1.1072 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.9198 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.7892 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.6870 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W
U-Value: 0.6132 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.5507 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.4996 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.4599 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.4485 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W
U-Value: 0.3861 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.3463 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.2839 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.2668 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.1987 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W
U-Value: 0.1703 W/(m² • °K)
cover
Value Heat
°K)
(m² •
°K)/W
Radiant floor, R-38 blanket insulation,

U-Value: 0.1760 W/(m² • °K)
any cover
Radiant floor, R-38 blanket insulation, any cover [Source: CIBSE]
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.4996 W/(m² • °K)
any cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.4315 W/(m² • °K)
any cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.3804 W/(m² • °K)
any cover
Value Heat
°K)
(m² •
°K)/W
U-Value: 0.3122 W/(m² • °K)
any cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.2839 W/(m² • °K)
any cover
Value Heat
°K)
(m² •
°K)/W

U-Value: 0.2157 W/(m² • °K)
any cover
Value Heat
°K)
(m² •
°K)/W
Screed, concrete, dense plaster U-Value: 2.38 W/(m² • °K)

2 in (50 mm) screed, 6 in (150 mm) cast concrete, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
kg/m³ °K)
6 in lightweight concrete 6 in (150 mm) - 0.1524 m 0.49 W/(m • °K) 512 kg/m³ 880 J/(kg •
block lightweight concrete °K)
block
1/2 in plaster (dense) 1/2 in (12 mm) plaster - 0.013 m 0.5 W/(m • °K) 1300 1000 J/(kg •
(dense) kg/m³ °K)
Vinyl floor covering, screed, concrete U-Value: 0 W/(m² • °K)

Vinyl floor covering, 3 in (75 mm) screed, 6 in (150 mm) cast concrete [Source: CIBSE]
Value Heat
AbsVinyl tile (AV01) AbsVinyl tile 0.00881 (m² - - - -
• °K)/W
kg/m³ °K)
block lightweight concrete
block
Carpet underlay, screed, concrete U-Value: 0 W/(m² • °K)

3/8 in (10 mm) carpet underlay, 3 in (75 mm) screed, 6 in (150 mm) cast concrete [Source: CIBSE]
Value Heat
carpet/underlay - carpet/underlay - - 0.010 m 0.023 W/(m • 24 kg/m³ 1590 J/(kg •
polyurethane board polyurethane board °K) °K)
cellular cellular
kg/m³ °K)
block
Carpet, underlay, timber on joists,

U-Value: 0 W/(m² • °K)
ventilated
3/8 in (10 mm) carpet with underlay, 3/4 in (19 mm) timber or chipboard on 4 in (100 mm) joists, ventilated underfloor cavity [Source:
CIBSE]
Value Heat
cellular cellular
3/4 in chipboard 3/4 in (19 mm) chipboard - 0.019 m 0.067 W/(m • 430 kg/m³ 1260 J/(kg •
°K) °K)
Air space Air space proxy for air 0.10919 (m² - - - -
wall or no construction • °K)/W
Carpet, underlay, screed, concrete,

U-Value: 0.28 W/(m² • °K)
insulation, building board
3/8 in (10 mm) carpet/underlay, 2 in (50 mm) screed, 6 in (150 mm) cast concrete, 4 in (100 mm) mineral fiber insulation between
battens, 1/2 in (12 mm) cementitious building board on underside [Source: CIBSE]
Value Heat
cellular cellular
kg/m³ °K)
Asbestos cement Asbestos cement building - 0.012 m 0.6 W/(m • °K) 1920 840 J/(kg •
building board board kg/m³ °K)
Vinyl, screed, concrete - A U-Value: 2.01 W/(m² • °K)

Value Heat
AbsVinyl tile (AV01) AbsVinyl tile 0.00881 - - - -
• °K)/W
kg/m³ °K)
block
Vinyl, screed, concrete - B U-Value: 1.77 W/(m² • °K)

Value Heat
• °K)/W
kg/m³ °K)
block
Vinyl, screed, insulation, concrete U-Value: 0 W/(m² • °K)

Vinyl floor covering, 3 in (75 mm) screed, 2 in (50 mm) extruded polystyrene insulation, 6 in (150 mm) cast concrete [Source: CIBSE]
Value Heat
• °K)/W
kg/m³ °K)
Polystyrene 2 in (IN35) Polystyrene 2 in (3.1 cm) 1.46780 (m² 0.050808 m 0.034615 W/(m 28.836000 1214.172000
• °K)/W • °K) kg/m³ J/(kg • °K)
block
Vinyl, timber, insulation, concrete U-Value: 0 W/(m² • °K)

Vinyl floor covering, 3/4 in (19 mm) timber or chipboard, 2 in (50 mm) extruded polystyrene insulation, 6 in (150 mm) cast concrete
[Source: CIBSE]
Value Heat
• °K)/W
°K) °K)
Polystyrene 2 in (IN35) Polystyrene 2 in (3.1 cm) 1.46780 (m² 0.050808 m 0.034615 W/(m 28.836000 1214.172000
• °K)/W • °K) kg/m³ J/(kg • °K)
block
Vinyl, timber on joists, ventilated U-Value: 0 W/(m² • °K)

Vinyl floor covering, 3/4 in (19 mm) timber or chipboard on 4 in (100 mm) joists, ventilated underfloor cavity [Source: CIBSE]
Value Heat
AbsVinyl tile (AV01) AbsVinyl tile 0.00881 - - - -
• °K)/W
°K) °K)
Air space Air space proxy for air 0.10919 - - - -
wall or no construction • °K)/W
Vinyl, timber on joists, building board - A U-Value: 1.52 W/(m² • °K)

Vinyl floor covering, 3/4 in (19 mm) timber or chipboard on 4 in (100 mm) joists, 1/2 in (12 mm) cementitious building board on underside
[Source: CIBSE]
Value Heat
cellular cellular
°K) °K)
block
Vinyl, timber on joists, building board - B U-Value: 1.38 W/(m² • °K)

Vinyl floor covering, 3/4 in (19 mm) timber or chipboard on 4 in (100 mm) joists, 1/2 in (12 mm) cementitious building board on underside
[Source: CIBSE]
Value Heat
cellular cellular
°K) °K)
block
Vinyl, screed, concrete, 2 in insulation,

U-Value: 0.50 W/(m² • °K)
building board
Vinyl floor covering, 2 in (50 mm) screed, 6 in (150 mm) cast concrete, 2 in (50 mm) mineral fiber insulation between battens, 1/2 in (12
mm) cementitious building board on underside [Source: CIBSE]
Value Heat
• °K)/W
kg/m³ °K)
Vinyl, screed, concrete, 4 in insulation,
U-Value: 0.29 W/(m² • °K)
building board
Vinyl floor covering, 2 in (50 mm) screed, 6 in (150 mm) cast concrete, 4 in (100 mm) mineral fiber insulation between battens, 1/2 in (12
mm) cementitious building board on underside [Source: CIBSE]
Value Heat
• °K)/W
kg/m³ °K)
Interior Walls
Light plaster, brick, light plaster U-Value: 1.6896 W/(m² • °K)

1/2 in (12 mm) light-weight plaster, 4 in (100 mm) brick, 1/2 in (12 mm) light-weight plaster
Value Heat
°K)
1.311205 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
°K)
Light plaster, double brick, light plaster U-Value: 1.0625 W/(m² • °K)
1/2 in (12 mm) light-weight plaster, 4 in (100 mm) brick, 1 in (25 mm) air, 4 in (100 mm) brick, 1/2 in (12 mm) light-weight plaster
Value Heat
°K)
Face brick 4 in (BK05) 4 in (10.1cm) face brick 0.07747 (m² 0.101585 m 1.311205 W/(m 2082.600000
921.096000
°K)/W °K) kg/m³ J/(kg °K)
Face brick 4 in (BK05) 4 in (10.1cm) face brick 0.07747 (m² 0.101585 m 1.311205 W/(m 2082.600000
921.096000
°K)
Light plaster, heavy concrete block, light

U-Value: 2.0668 W/(m² • °K)

plaster
1/2 in (12 mm) light-weight plaster, 4 in (100 mm) heavy-weight concrete block, 1/2 in (12 mm) light-weight plaster
Value Heat
°K)
°K)
Light plaster, medium concrete block,

U-Value: 1.6166 W/(m² • °K)

light plaster
1/2 in (12 mm) light-weight plaster, 4 in (100 mm) medium-weight concrete block, 1/2 in (12 mm) light-weight plaster
Value Heat
°K)
°K)
Light plaster, light concrete block, light

U-Value: 1.0539 W/(m² • °K)

plaster
1/2 in (12 mm) light-weight plaster, 4 in (100 mm) light-weight concrete block, 1/2 in (12 mm) light-weight plaster
Value Heat
°K)
°K)
Standard double gypsum with 4 in air

U-Value: 1.3289 W/(m² • °K)

gap
1 in (25 mm) gypsum, 4 in (100 mm) air, 1 in (25 mm) gypsum
Value Heat
Gypsum lightweight Gypsum lightweight agg 1 0.11030 0.025389 m 0.230188 W/(m 720.900000 837.360000
(m² agg 1 in (GP05) in (25 mm) • °K)/W • °K) kg/m³ J/(kg • °K)
Gypsum lightweight Gypsum lightweight agg 1 0.11030 0.025389 m 0.230188 W/(m 720.900000 837.360000
(m² agg 1 in (GP05) in (25 mm) • °K)/W • °K) kg/m³ J/(kg • °K)
Standard double fiberboard with 4 in air

U-Value: 1.1905 W/(m² • °K)

gap
1/2 in (12 mm) fiberboard, 4 in (100 mm) air, 1/2 in (12 mm) fiberboard
Value Heat
4 in single-leaf brick (plastered both

U-Value: 1.9709 W/(m² • °K)

sides)
4 in (100 mm) single-leaf brick (plastered both sides)
Value Heat
°K)
Brick - brickwork inner Brick - brickwork inner leaf - 0.115 m 0.62 W/(m • °K) 1700 kg/m³ 800 J/(kg •
leaf °K)
°K)
8 in single-leaf brick (plastered both
U-Value: 1.4433 W/(m² • °K)

sides)
8 in (200 mm) single-leaf brick (plastered both sides)
Value Heat
°K)
leaf °K)
leaf °K)
°K)
1 1/4 ft single-leaf brick (plastered both

U-Value: 1.1080 W/(m² • °K)

sides)
1 1/4 ft (400 mm) single-leaf brick (plastered both sides)
Value Heat
°K)
leaf °K)
leaf °K)
leaf °K)
°K)
Solid breeze blocks (plastered both

U-Value: 1.1789 W/(m² • °K)

sides)
Solid breeze blocks (plastered both sides)
Value Heat
°K)
leaf °K)
leaf °K)
°K)
4 in single-leaf brick U-Value: 2.2448 W/(m² • °K)

4 in (100 mm) single-leaf brick
Value Heat
leaf °K)
5 in single-leaf brickwork (plastered on
U-Value: 2.0302 W/(m² • °K)

one side)
5 in (125 mm) single-leaf brickwork (plastered on one side)
Value Heat
leaf °K)
°K)
Aerated concrete blocks U-Value: 1.4778 W/(m² • °K)

Aerated concrete blocks
Value Heat
Autoclaved Aerated Autoclaved Aerated - 0.100 m 0.27 W/(m • °K) 700 kg/m³ 1050 J/(kg •
concrete block (density concrete block (density °K)
700) 700)
Hollow concrete blocks U-Value: 1.2718 W/(m² • °K)

Hollow concrete blocks
Value Heat
Insulated concrete form U-Value: 0.8554 W/(m² • °K)

Insulated concrete form
Value Heat
Glass blocks U-Value: 2.4823 W/(m² • °K)

Glass blocks
Value Heat
Concrete cast glass Concrete cast glass - -m 0.90 W/(m • °K) 1950 kg/m³ 840 J/(kg •
reinforced reinforced °K)
4 in reinforced concrete U-Value: 3.0172 W/(m² • °K)

4 in (100 mm) reinforced concrete
Value Heat
9 in medium-weight concrete block U-Value: 1.4464 W/(m² • °K)

9 in (225 mm) medium-weight concrete block
Value Heat
Concrete block Concrete block - 0.220 m 0.77 W/(m • °K) 1900 kg/m³ 840 J/(kg •
mediumweight 9 in mediumweight 9 in °K)
1 1/2 ft dense concrete U-Value: 1.6204 W/(m² • °K)

1 1/2 ft dense concrete
Value Heat
Polystyrene faced with hardboard on

U-Value: 0.7987 W/(m² • °K)

plasterboard
1 in (25 mm) polystyrene faced with 1/8 in (3 mm) hardboard on 3/8 in (10 mm) plasterboard
Value Heat
0.034615 W/(m (IN33) • °K)/W • °K) kg/m³ J/(kg • °K)
Hardboard Hardboard - 0.003 m 0.08 W/(m • °K) 600 kg/m³ 2000 J/(kg •
°K)
3/8 in plasterboard 3/8 in (10 mm) - 0.009 m 0.16 W/(m • °K) 950 kg/m³ 840 J/(kg •
plasterboard °K)
Expanded-wood chipboard U-Value: 2.8846 W/(m² • °K)

1/2 in (12 mm) expanded-wood chipboard
Value Heat
Chipboard Chipboard - 0.013 m 0.067 W/(m • 430 kg/m³ 1260 J/(kg •
°K) °K)
Block cavity wall with air gap (plastered) U-Value: 1.3381 W/(m² • °K)
8 in (200 mm) block-cavity wall with 2 in (50 mm) air gap (plastered)
Value Heat
°K)
°K)
Cast concrete cavity wall with air gap

U-Value: 1.1684 W/(m² • °K)

(plastered)
8 in (200 mm) cast concrete cavity wall with 2 in (50 mm) air gap (plastered)
Value Heat
°K)/W
Brick cavity wall with air gap U-Value: 1.2331 W/(m² • °K)
4 in (100 mm) brick cavity wall with 2 in (50 mm) air gap
Value Heat
Brick cavity wall (plaster both sides) U-Value: 1.1519 W/(m² • °K)
4 in (100 mm) brick cavity wall with 1/2 in (12 mm) (plaster both sides)
Value Heat
°K)
°K)
Standard double plasterboard with

U-Value: 0.9662 W/(m² • °K)

insulation
Two 1/2 in (12 mm) plasterboard leaves with 1 in (25 mm) glass wool in cavity
Value Heat
°K)
Glass fiber wool - fiber Glass fiber wool - fiber quilt - 0.025 m 0.040 W/(m • 12 kg/m³ 840 J/(kg •
quilt °K) °K)
°K)
3/8 in plasterboard on studs U-Value: 1.8100 W/(m² • °K)

3/8 in (10 mm) plasterboard on 2 in (50 mm) by 4 in (100 mm) studs at 16 in (400 mm) centers
Value Heat
3/8 in plasterboard 3/8 in (10 mm) - 0.009 m 0.16 W/(m • °K) 950 kg/m³ 840 J/(kg •
plasterboard °K)
1/2 in plasterboard on studs U-Value: 1.6598 W/(m² • °K)
1/2 in (12 mm) plasterboard on 2 in (50 mm) by 4 in (100 mm) studs at 16 in (400 mm) centers
Value Heat
°K)
°K)
1/2 in plasterboard on studs with

U-Value: 0.7594 W/(m² • °K)

mineral fiber slab
1/2 in (12 mm) plasterboard on studs at 16 in (400 mm) centers with 1 in (25 mm) mineral fiber slab
Value Heat
°K)
°K)
Mineral fiber insulation Mineral fiber insulation - 0.025 m 0.035 W/(m • 30 kg/m³ 1000 J/(kg •
°K) °K)
1/4 in plywood on studs U-Value: 1.9231 W/(m² • °K)

1/4 in (6 mm) plywood on 2 in (50 mm) by 2 in (50 mm) studs at 2 ft (600 mm) centers
Value Heat
°K)
°K)
°K) °K)
3/8 in plywood on studs U-Value: 1.7857 W/(m² • °K)

3/8 in (10 mm) plywood on 2 in (50 mm) by 2 in (50 mm) and 1 in (25 mm) by 2 in studs at 18 in centers 2 in (50 mm) apart
Value Heat
°K)
°K)
°K) °K)
Asbestos wallboard on timber frame U-Value: 2.1127 W/(m² • °K)

Asbestos wallboard on 1 1/4 in (32 mm) timber frame 8 in (200 mm) apart
Value Heat
Asbestos fiber Asbestos fiber - 0.010 m 0.06 W/(m • °K) 640 kg/m³ 840 J/(kg •
°K)
°K)
Domestic solid party wall U-Value: 1.4572 W/(m² • °K)

Domestic solid party wall
Value Heat
°K)
Domestic lightweight party wall U-Value: 1.1905 W/(m² • °K)

Domestic lightweight party wall
Value Heat
°K)
Lightweight plasterboard partit ion U-Value: 1.5936 W/(m² • °K)

Lightweight plasterboard partition
Value Heat
°K)
Solid partition U-Value: 1.1658 W/(m² • °K)

Solid partition
Value Heat
°K)
4 in clay tile with plaster U-Value: 1.4778 W/(m² • °K)

4 in (100 mm) clay tile with 3/4 in (19 mm) plaster
Value Heat
(CT02) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Cmt plaster 3/4 in Plaster with sand 0.02635 0.019 m 0.721197 W/(m 1858.320000 837.360000
(CM03) aggregate, 3/4 in (19 mm) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Light-weight concrete block with plaster U-Value: 1.3053 W/(m² • °K)

4 in (100 mm) lightweight concrete block with 3/4 in (19 mm) plaster
Value Heat
Cmt plaster 3/4 in Plaster with sand 0.019 m 0.721197 W/(m 1858.320000 837.360000
0.02635 (m² (CM03) • °K) kg/m³ J/(kg • °K)
aggregate 3/4 in (19 mm) • °K)/W
Heavy-weight concrete block with
U-Value: 1.7352 W/(m² • °K)

plaster
4 in (100 mm) heavyweight concrete block with 3/4 in (19 mm) plaster
Value Heat
0.02635 (m² (CM03) • °K) kg/m³ J/(kg • °K)
4 in common brick with plaster U-Value: 1.5662 W/(m² • °K)

4 in (100 mm) common brick with 3/4 in (19 mm) plaster
Value Heat
°K)/W
Heavyweight concrete with plaster U-Value: 1.7938 W/(m² • °K)

4 in (100 mm) heavyweight concrete with 3/4 in (19 mm) plaster
Value Heat
0.02635 (m² (CM03) • °K) kg/m³ J/(kg • °K)
5 in clay tile with plaster U-Value: 1.3866 W/(m² • °K)

5 in (125 mm) clay tile with 3/4 in (19 mm) plaster
Value Heat
Clay tile 4 in (HF-C1) 4 in (10.1 cm) clay tile 0.17786.0 0.101585 m 0.571143 W/(m 1121.400000 837.360000
1 (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
Light-weight concrete block plastered U-Value: 0.9676 W/(m² • °K)

8 in (200 mm) lightweight concrete block plastered both sides
Value Heat
0.02635 (m² (CM03) • °K) kg/m³ J/(kg • °K)
0.02635 (m² (CM03) • °K) kg/m³ J/(kg • °K)
heavyweight concrete block plastered U-Value: 1.5294 W/(m² • °K)

8 in (200 mm) heavyweight concrete block plastered both sides
Value Heat
(CM03) aggregate, 3/4 in (19 mm) • °K)/W • °K) kg/m³ J/(kg • °K)
(CM03) aggregate, 3/4 in (19 mm) • °K)/W • °K) kg/m³ J/(kg • °K)
8 in common brick with plaster U-Value: 1.2849 W/(m² • °K)

8 in (200 mm) common brick plastered Both Sides
Value Heat
°K)/W
°K)/W
8 in heavy concrete with plaster U-Value: 1.6228 W/(m² • °K)

8 in (200 mm) heavy concrete plastered both sides
Value Heat
°K)/W
°K)/W
12 in heavy concrete with plaster U-Value: 1.4816 W/(m² • °K)

12 in (300 mm) heavy concrete plastered both sides
Value Heat
°K)/W
°K)/W

Value Heat
Clay tile 4 in (HF-C1) 4 in (10.1 cm) clay tile 0.17786 0.101585 m 0.571143 W/(m 1121.400000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Light-weight concrete block U-Value: 1.8962 W/(m² • °K)

4 in (100 mm) light-weight concrete block
Value Heat

Value Heat

Value Heat

Value Heat

Value Heat
Clay tile 8 in (HF-C6) 8 in (20.3 cm) clay tile 0.35578 0.203200 m 0.571143 W/(m 1121.400000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat

Value Heat

Value Heat

Value Heat

Value Heat
Frame partition with 3/4 in gypsum

U-Value: 1.4733 W/(m² • °K)

board
Frame partition with 3/4 in (19 mm) gypsum board
Value Heat
°K)/W
°K)
1 in wood U-Value: 2.1280 W/(m² • °K)

1 in (25 mm) wood
Value Heat
°K)

2 in (50 mm) wood
Value Heat
°K)

3 in (75 mm) wood
Value Heat
Wood 3 in (HF-B1) Wood 3 in (7.6 cm) 0.62893 0.076196 m 0.121151 W/(m 592.740000 837.360000
(m²
• °K)/W • °K) J/(kg • °K)

4 in (100 mm) wood
Value Heat
°K)
Frame partition with 1 in wood U-Value: 1.1630 W/(m² • °K)

Frame partition with 1 in (25 mm) wood
Value Heat
°K)
2 in furniture U-Value: 0.7815 W/(m² • °K)

2 in (50 mm) furniture
Value Heat
°K)
3 in furniture U-Value: 0.5884 W/(m² • °K)

3 in (75 mm) furniture
Value Heat
Wood 3 in (HF-B1) Wood 3 in (7.6 cm) 0.62893 0.076196 m 0.121151 W/(m 592.740000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
Frame construction, wood sheathing,

U-Value: 1.4365 W/(m² • °K)
wood studs
Frame construction, no cavity insulation, no board insulation, wood sheathing, wood studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W

studding °K)
Frame construction, wood sheathing,

U-Value: 1.7885 W/(m² • °K)

metal studs
Frame construction, no cavity insulation, no board insulation, wood sheathing, metal studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
6 in metal studding 6 in (150 mm) metal - 0.140 m 0.14 W/(m • °K) 650 kg/m³ 1200 J/(kg •
studding °K)
Frame construction, R-2 board

U-Value: 1.1015 W/(m² • °K)

insulation, wood studs
Frame construction, no cavity insulation, R-2 board insulation, wood studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 1.3059 W/(m² • °K)

insulation, metal studs
Frame construction, no cavity insulation, R-2 board insulation, metal studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.9198 W/(m² • °K)

Value Heat
w/ 48 in oc SIP wall mm) including SIP wall • °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 1.0618 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.7892 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.8914 W/(m² • °K)
Value Heat
• °K)/W
frame frame factor
No insulation No insulation 0.00001 (m² • - - -
-
°K)/W
R-4 insulation R-4 insulation 0.70444 (m² • - - -
-
°K)/W
studding °K)

U-Value: 0.6927 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.7722 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.6189 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.6813 W/(m² • °K)

Value Heat
frame frame factor
°K)/W
°K)/W
studding °K)
Frame construction, R-11 insulation,

U-Value: 0.5507 W/(m² • °K)

wood studs
Frame construction, R-11 cavity insulation, no board insulation, wood studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.6927 W/(m² • °K)

metal studs
Frame construction, R-11 cavity insulation, no board insulation, metal studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)
Frame construction, R-11 plus R-2

U-Value: 0.4883 W/(m² • °K)
Frame construction, R-11 cavity insulation, R-2 board insulation, wood studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
studding °K)

U-Value: 0.6018 W/(m² • °K)

Frame construction, R-11 cavity insulation, R-2 board insulation, metal studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)
Frame construction, R-11 and R-3

U-Value: 0.4485 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.5450 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.4144 W/(m² • °K)
Value Heat
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.4996 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.3861 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.4599 W/(m² • °K)
Value Heat
• °K)/W
frame frame factor
°K)/W

(m² •
°K)/W
studding °K)

U-Value: 0.3633 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.4258 W/(m² • °K)

Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.4883 W/(m² • °K)

wood sheathing, wood studs
Frame construction, R-15 cavity insulation, no board insulation, wood sheathing, wood studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)
Frame construction, R-15 insulation, U-Value: 0.6189 W/(m² • °K)

wood sheathing, metal studs
Frame construction, R-15 cavity insulation, no board insulation, wood sheathing, metal studs [Source: CIBSE]
Value Heat
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.4372 W/(m² • °K)

Frame construction, R-15 cavity insulation, R-2 insulation, wood studs [Source: CIBSE]
Value Heat
- w/ 48 in oc SIP wall mm)
including SIP wall • °K)/W frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.5507 W/(m² • °K)

Frame construction, R-15 cavity insulation, R-2 insulation, metal studs [Source: CIBSE]
Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.4031 W/(m² • °K)
Value Heat
°K)/W
(m² •
°K)/W
studding °K)

U-Value: 0.4996 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.3747 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.4599 W/(m² • °K)

Value Heat
°K)/W
R-4 insulation R-4 insulation 0,70444 (m² • - - - -
°K)/W
studding °K)
Frame construction, R-15 plus R-5 U-Value: 0.3520 W/(m² • °K)

Value Heat
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.4258 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.3293 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.3974 W/(m² • °K)
Value Heat
°K)/W
(m² •
°K)/W
studding °K)

U-Value: 0.36907 W/(m² • °K)
wood sheathing, wood studs
Frame construction, R-21 cavity insulation, no board insulation, wood sheathing, wood studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.5621 W/(m² • °K)

wood sheathing, metal studs
Frame construction, R-21 cavity insulation, no board insulation, wood sheathing, metal studs [Source: CIBSE]
Value Heat
• °K)/W
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.3406 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

Value Heat
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.3350 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.4655 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.3007 W/(m² • °K)
Value Heat
°K)/W
(m² •
°K)/W
studding °K)

U-Value: 0.4258 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.2839 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

U-Value: 0.3974 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)

Value Heat
frame frame factor
°K)/W
°K)/W
studding °K)

U-Value: 0.3747 W/(m² • °K)

Value Heat
°K)/W
°K)/W
studding °K)
Siding, R-2 insulation, interior finish U-Value: 1.1412 W/(m² • °K)

Block, stucco or siding, R-2 board insulation, open core, plus interior finish [Source: CIBSE]
Value Heat
Concrete block (dense) Concrete block (dense) - 0.200 m 1.63 W/(m • °K) 2300 kg/m³ 1000 J/(kg •
°K)
°K)
°K)/W
Finish (HF-A6) Finish (HF-A6) 0.03060 (m² 0.012710 m 1249.560000 1088.568000
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Siding, R-2 insulation, filled core, interior U-Value: 0.8687 W/(m² • °K)

finish
Block, stucco or siding, R-2 board insulation, filled core, plus interior finish [Source: CIBSE]
Value Heat
°K)
°K)
°K)/W
Finish (HF-A6) Finish (HF-A6) 0.03060 0.012710 m 0.415376 W/(m 1249.560000 1088.568000
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

finish
Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

finish
Value Heat
°K)
°K)
(m² •
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

finish
Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Siding, R-6 insulation, filled core, plus

U-Value: 0.5394 W/(m² • °K)
interior finish
Value Heat
°K)
°K)
°K)/W
Finish (HF-A6) Finish (HF-A6) 0.03060 (m² 0.012710 m 0.415376 W/(m 1249.560000
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Siding, R-10 insulation, filled core,

U-Value: 0.3917 W/(m² • °K)

interior finish
Value Heat
°K)
°K)
°K)/W
Finish (HF-A6) Finish (HF-A6) 0.03060(m² 0.012710 m 0.415376 W/(m 1249.560000 1088.568000
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
°K)
°K)
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Siding, R-15 insulation, filled core,

U-Value: 0.2895 W/(m² • °K)
interior finish

Value Heat
°K)
°K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
Block, interior/exterior finish, R-11 plus

U-Value: 0.5507 W/(m² • °K)

R-2 insulation
Block, any exterior finish, R-11 stud cavity, R-2 board, open core, interior finish [Source: CIBSE]
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4769 W/(m² • °K)

R-2 insulation, filled
Block, any exterior finish, R-11 stud cavity, R-2 board, filled core, interior finish [Source: CIBSE]
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.5053 W/(m² • °K)

R-3 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

U-Value: 0.4428 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4655 W/(m² • °K)

R-4 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4088 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
Finish (HF-A6) Finish (HF-A6) 0.03060 (m² 0.415376 W/(m
0.012710 m • °K) J/(kg • °K)

U-Value: 0.4258 W/(m² • °K)

R-5 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.3804 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.5053 W/(m² • °K)

R-2 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
U-Value: 0.4428 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4655 W/(m² • °K)

R-3 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4144 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4315 W/(m² • °K)
R-4 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
Finish (HF-A6) Finish (HF-A6) 0.03060 (m² 0.012710 m 0.415376 W/(m 1249.560000
• °K)/W • °K) kg/m³ J/(kg • °K)

U-Value: 0.3861 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.3974 W/(m² • °K)

R-5 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.3577 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

U-Value: 0.4712 W/(m² • °K)

R-2 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4144 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4315 W/(m² • °K)

R-3 insulation
Value Heat
°K)
°K)
°K)/W
(m² •
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

U-Value: 0.3861 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.4031 W/(m² • °K)

R-4 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.3633 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
U-Value: 0.3747 W/(m² • °K)

R-5 insulation
Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

U-Value: 0.3406 W/(m² • °K)

Value Heat
°K)
°K)
°K)/W
°K)/W
0.415376 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Light-weight plaster, brick, light-weight

U-Value: 1.75 W/(m² • °K)
plaster
1/2 in (12 mm) lightweight plaster 4 in (100 mm) brick, 1/2 in (12 mm) lightweight plaster [Source: CIBSE]
Value Heat
°K)
°K)
°K)
Light-weight plaster, concrete block,

U-Value: 1.05 W/(m² • °K)
light-weight plaster
1/2 in (12 mm) lightweight plaster, 4 in (100 mm) lightweight concrete block, 1/2 in (12 mm) lightweight plaster [Source: CIBSE]
Value Heat
°K)
°K)
Plasterboard, timber studding,

U-Value: 1.75 W/(m² • °K)
plasterboard
1/2 in (12 mm) plasterboard, timber studding, 1/2 in (12 mm) plasterboard [Source: CIBSE]
Value Heat
°K)
°K)
°K)
Doors
Wooden U-Value: 2.1944 W/(m² • °K)

Wooden door
Heat
1 1/2 in wood 1 1/2 in (40 mm) wood - 0.0376 m 0.15 W/(m • °K) 608 kg/m³ 1630
J/(kg •
°K)
Metal U-Value: 3.7021 W/(m² • °K)

Metal door
Heat
Metal surface Metal surface - 0.0008 m 45.28 W/(m • 7824 500 J/(kg
°K) kg/m³ • °K)
J/(kg •
°K)
°K) kg/m³ • °K)
Timber flush-panel hollow-core U-Value: 2.3256 W/(m² • °K)

Timber flush-Panel hollow-core door (normally hung)
Heat
°K) kg/m³ • °K)
J/(kg •
°K)
°K) kg/m³ • °K)
Solid hardwood U-Value: 2.5572 W/(m² • °K)

Solid Hardwood door (normally hung)
Heat
°K) kg/m³ • °K)
J/(kg •
°K)
°K) kg/m³ • °K)
Hollow core wood U-Value: 3.1796 W/(m² • °K)

Hollow core wood [Source: CIBSE]
Heat
5/8 in plywood 5/8 in (16 mm) plywood - 0.0159 m 0.12 W/(m • °K) 544 kg/m³ 1210
J/(kg •
°K)
Air space Air space proxy for air wall or 0.10919 (m² - - - -
no construction °K)/W
J/(kg •
°K)
Door - wood - hollow core - wood storm U-Value: 1.8737 W/(m² • °K)
Door - wood - hollow core - wood storm [Source: CIBSE]
Heat
J/(kg •
°K)
no construction •
°K)/W
J/(kg •
°K)
Hollow core wood, metal storm U-Value: 2.0441 W/(m² • °K)

Hollow core wood, metal storm [Source: CIBSE]
Heat
J/(kg •
°K)
no construction •
°K)/W
J/(kg •
°K)
Solid core wood U-Value: 2.6119 W/(m² • °K)

Solid core wood [Source: CIBSE]
Heat
J/(kg •
°K)
Solid core wood, wood storm U-Value: 1.6466 W/(m² • °K)

Solid core wood, wood storm [Source: CIBSE]
Heat
J/(kg •
°K)
Solid core wood, metal storm U-Value: 1.8170 W/(m² • °K)
Solid core wood, metal storm [Source: CIBSE]
Heat
J/(kg •
°K)
Wood panel U-Value: 3.8042 W/(m² • °K)

Wood panel [Source: CIBSE]
Heat
J/(kg •
°K)
Wood panel with wood storm U-Value: 2.0440 W/(m² • °K)

Wood panel with wood storm [Source: CIBSE]
Heat
J/(kg •
°K)
Wood panel, metal storm U-Value: 2.3279 W/(m² • °K)

Wood panel, metal storm [Source: CIBSE]
Heat
J/(kg •
°K)
Metal, fiberglass core U-Value: 3.3500 W/(m² • °K)

Metal, fiberglass core [Source: CIBSE]
Heat
°K) kg/m³ • °K)
1/2 in fiberboard 1/2 in (12 mm) fiberboard - 0.0127 m 0.07 W/(m • °K) 400 kg/m³ 1300
sheathing sheathing J/(kg •
°K)
°K) kg/m³ • °K)
Metal, fiberglass core, storm U-Value: 2.0838 W/(m² • °K)

Metal with fiberglass core and storm door [Source: CIBSE]
Heat
°K) kg/m³ • °K)
1/2 in fiberboard 1/2 in (12 mm) fiberboard - 0.0127 m 0.07 W/(m • °K) 400 kg/m³ 1300
sheathing sheathing J/(kg •
°K)
°K) kg/m³ • °K)
Wood frame with single clear glass U-Value: 5.6212 W/(m² • °K)
Wood frame with single clear glass [Source: CIBSE]
Heat
J/(kg •
°K)
Opaque spandral Opaque spandral glass - 0.0064 m 0.99 W/(m • °K) 2528 880 J/(kg
glass kg/m³ • °K)
Metal frame with single clear glass U-Value: 6.5580 W/(m² • °K)
Metal frame with single clear glass [Source: CIBSE]
Heat
J/(kg •
°K)
Wood frame, single glass door, glass storm U-Value: 2.6970 W/(m² • °K)
Wood frame, single glass door, glass storm [Source: CIBSE]
Heat
J/(kg •
°K)
Metal frame, single glass door, glass storm U-Value: 3.6907 W/(m² • °K )
Metal frame, single glass door, glass storm [Source: CIBSE]
Heat
°K) kg/m³ • °K)
Wood frame, double glass door U-Value: 3.1286 W/(m² • °K)

Wood frame, double glass door [Source: CIBSE]
Heat
J/(kg •
°K)
• °K)
Metal frame, double glass door U-Value: 4.1165 W/(m² • °K )

Metal frame, double glass door [Source: CIBSE]
Heat
°K) kg/m³ • °K)
Wood frame, double/triple glass, glass

U-Value: 1.9361 W/(m² • °K)
storm
Wood frame, double/triple glass, glass storm [Source: CIBSE]
Heat
J/(kg •
°K)
Metal frame, double/triple glass, glass

U-Value: 2.7822 W/(m² • °K )
storm
Metal frame, double/triple glass, glass storm [Source: CIBSE]
Heat
°K) kg/m³ • °K)
French door, wood frame with single glass U-Value: 5.3089 W/(m² • °K)
French door, wood frame with single clear glass [Source: CIBSE]
Heat
J/(kg •
°K)
French door, metal frame with single glass U-Value: 6.8703 W/(m² • °K )
French door, metal frame with single clear glass [Source: CIBSE]
Heat
°K) kg/m³ • °K)
French door, wood frame with double glass U-Value: 2.9639 W/(m² • °K)
French door, wood frame with double glass [Source: CIBSE]
Heat
J/(kg •
°K)
French door, metal frame with double glass U-Value: 4.2812 W/(m² • °K )
French door, metal frame with double glass [Source: CIBSE]
Heat
°K) kg/m³ • °K)
French door, wood frame with triple glass U-Value: 2.1065 W/(m² • °K)
French door, wood frame with triple glass [Source: CIBSE]
Heat
J/(kg •
°K)
French door, metal frame with triple glass U-Value: 3.3216 W/(m² • °K )
French door, metal frame with triple glass [Source: CIBSE]
Heat
°K) kg/m³ • °K)
Roofs
Flat roof - A U-Value: 0.2497 W/(m² • °K)

Flat roof
Value Heat
resistance (m²
°K)/W
°K) °K)
Ceiling air space Ceiling air space resistance 0.18000 - - - -
resistance (m²
°K)/W
°K)
Inside horizontal Inside horizontal surface 0.16000 - - - -
surface resistance resistance (m²
°K)/W
Flat roof - B U-Value: 0.2277 W/(m² • °K)

Flat roof
Value Heat
resistance (m²
°K)/W
°K) °K)
resistance (m²
°K)/W
resistance (m²
°K)/W
Acoustic tile Acoustic tile - 0.0191 m 0.06 W/(m • °K) 368 kg/m³ 590 J/(kg •
°K)
°K)/W
Flat roof - C U-Value: 0.3183 W/(m² • °K)

Flat roof
Value Heat
resistance (m²
°K)/W
Built-up roofing Built-up roofing - 0.0095 m 0.16 W/(m • °K) 1120 kg/m³ 1460 J/(kg •
°K)
Inside horizontal Inside horizontal surface 0.16000 (m² - - - -
surface resistance resistance • °K)/W
Sloping roof including loft U-Value: 0.1589 W/(m² • °K)

Value Heat
resistance (m²
°K)/W
°K)
resistance (m²
°K)/W
°K)
°K)/W
Sloping roof including loft U-Value: 0.2330 W/(m² • °K)

Value Heat
resistance (m²
°K)/W
Wood shingles Wood shingles - 0.0064 m 0.04 W/(m • °K) 592 kg/m³ 1300 J/(kg •
°K)
°K)
resistance (m²
°K)/W
resistance (m²
°K)/W
°K)
°K)/W
Lightweight curtain roof U-Value: 0.2487 W/(m² • °K)

Value Heat
°K) °K)
°K)
Lightweight curtain roof U-Value: 0.2392 W/(m² • °K)

Value Heat
resistance (m²
°K)/W
Slate or tile Slate or tile - 0.0127 m 1.59 W/(m • °K) 1920 kg/m³ 1260 J/(kg •
°K)
°K)
resistance (m²
°K)/W
resistance (m²
°K)/W
°K)
°K)/W
Sloping roof - domestic U-Value: 3.3775 W/(m² • °K)

Sloping roof - domestic
Value Heat
Wood shingle (WS01) For walls 0.15392 (m² 0.017769 m 0.115440 W/(m 512.640000
1256.040000
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Un-insulated flat roof U-Value: 1.5583 W/(m² • °K)
Un-insulated flat roof
Value Heat
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Super-insulated flat roof U-Value: 0.1769 W/(m² • °K)

Super-insulated flat roof
Value Heat
resistance (m²
°K)/W
°K)
°K) °K)
Roof terrace system U-Value: 0.4694 W/(m² • °K)

Roof terrace system
Value Heat
Blt-Up roof 3/8 in Blt-Up roof 3/8 in (1 cm) 0.05870 0.009540 m 0.162516 W/(m 1121.400000 1465.380000
(BR01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Roof terrace system U-Value: 1.3824 W/(m² • °K)

Roof terrace system
Value Heat
Asph roll roof (AR01) Rolled roofing 0.02642 - - - -
(m²
°K)/W
(m²
• °K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
2x4 frame factor • °K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
Steel sheet with 2 in insulation U-Value: 0.5343 W/(m² • °K)

Steel sheet with 2 in (50 mm) insulation
Value Heat
(m²
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(m²
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(m²
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Value Heat
(m²
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
resistance (m²
°K)/W
°K)
°K)
resistance (m²
°K)/W
°K)
°K)/W

Value Heat
(m²
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(IN05) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Value Heat
(m²
°K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Stone chipping, asphalt, screed, heavy

U-Value: 2.5405 W/(m² • °K)

concrete block
1 in (25 mm) stone chipping 3/4 in (19 mm) asphalt 1 1/2 in (40 mm) screed 6 in (150 mm) concrete block (heavy)
Value Heat
°K)
Poured asphalt Poured asphalt - 0.019 m 1.20 W/(m • °K) 2100 kg/m³ 920 J/(kg •
°K)
Screed Screed - 0.075 m 0.41 W/(m • °K) 1200 kg/m³ 840 J/(kg •
°K)
Cast concrete Cast concrete - 0.150 m 1.13 W/(m • °K) 2000 kg/m³ 1000 J/(kg •
°K)
Stone chipping, asphalt, screed, light

U-Value: 0.9165 W/(m² • °K)

concrete block
1 in (25 mm) stone chipping 3/4 in (19 mm) asphalt 1 1/2 in (40 mm) screed 6 in (150 mm) concrete block (light)
Value Heat
°K)
°K)
°K)
°K)
Asphalt, screed, dense cast concrete,

U-Value: 2.0240 W/(m² • °K)
dense plaster
3/4 in (19 mm) asphalt 3 in (75 mm) screed 6 in (150 mm) cast concrete (dense) 1/2 in (12 mm) plaster (dense)

Value Heat
Poured asphalt Poured asphalt
- 0.019 m 1.20 W/(m • °K) 2100 kg/m³ 920 J/(kg •
°K)
°K)
°K)
(dense) °K)
Asphalt, aerated concrete slab, dense

U-Value: 0.8760 W/(m² • °K)

plaster
3/4 in (19 mm) asphalt 6 in (150 mm) Aerated concrete slab 1/2 in (12 mm) plaster (dense)
Value Heat
°K)
(density 500)
(dense) °K)
Asphalt, fiberboard, aced, air, aced U-Value: 1.5867 W/(m² • °K)

3/4 in (19 mm) asphalt 1/2 in (12 mm) fiberboard 3/8 in (10 mm) aced 1 in (25 mm) air 3/8 in (10 mm) aced
Value Heat
°K)
°K)
- or no construction
• °K)/W
°K)
Asphalt, fiberboard, gypsum U-Value: 1.3207 W/(m² • °K)

3/4 in (19 mm) asphalt 1/2 in (12 mm) fiberboard 1 in (25 mm) air 3/8 in (10 mm) gyp.
Value Heat
°K)
- or no
m • °K) kg/m³ J/(kg • °K)
°K)/W
Asphalt, fiberboard, 1 in batting, gypsum U-Value: 0.7923 W/(m² • °K)
3/4 in (19 mm) asphalt 1/2 in (12 mm) fiberboard 1 in (25 mm) air 1 in (25 mm) batt 3/8 in (10 mm) gyp.
Value Heat
°K)
GypBd 1/2 in (GP01) GypBd 1/2 in (1.3 cm) 0.07931 (m² 0.012710 m 0.160266 W/(m 801.000000
837.360000
Asphalt, fiberboard, 2 in batting, gypsum U-Value: 0.5299 W/(m² • °K)

Value Heat
°K)
Minwool batt R7 Batt, R-7 5.74 cm 1.32571 (m² 0.057361 m 0.043268 W/(m 9.612000
837.360000
(IN01) °K)/W °K) kg/m³ J/(kg °K)
837.360000
3/4 in asphalt 1/2 in fiberboard 1 in air 3 U-Value: 0.3981 W/(m² • °K)

in batt 3/8 in gyp.
Value Heat
°K)
837.360000
3/4 in asphalt 1/2 in fiberboard 2 in EPS

U-Value: 0.7399 W/(m² • °K)
slab 1 in air 3/8 in gyp.
3/4 in (19 mm) asphalt 1/2 in (12 mm) fiberboard 2 in (50 mm) EPS slab 1 in (25 mm) air 3/8 in (10 mm) gyp.
Value Heat
°K)
• °K)/W • °K) kg/m³ J/(kg • °K)
3/4 in asphalt 1/2 in fiberboard 2 in EPS

U-Value: 0.4841 W/(m² • °K)
slab 1 in air 3/8 in gyp.
3/4 in (19 mm) asphalt 1/2 in (12 mm) fiberboard 2 in (50 mm) EPS slab 1 in (25 mm) air 3/8 in (10 mm) gyp.
Value Heat
°K)
837.360000
3/4 in asphalt 1/2 in screed 2 in wood

U-Value: 1.0502 W/(m² • °K)

wool slab 1 in air 3/8 in gyp.
3/4 in (19 mm) asphalt 1/2 in (12 mm) screed 2 in (50 mm) wood wool slab 1 in (25 mm) air 3/8 in (10 mm) gyp.
Value Heat
°K)
°K)
W/(m 801.000000 J/(kg • °K)
°K)/W °K) kg/m³
3/4 in felt / bitumen 1 in EPS slab 1/8 in U-Value: 1.1206 W/(m² • °K)

metal deck
3/4 in (19 mm) felt / bitumen 1 in (25 mm) EPS slab 1/8 in (3 mm) metal deck
Value Heat
°K)
°K)
- or no
• °K)/W • °K) kg/m³ J/(kg • °K)
4 in wood with 2 in insulation U-Value: 0.3688 W/(m² • °K)

4 in (100 mm) wood with 2 in (50 mm) insulation
Value Heat
°K)
°K)
2 1/2 in wood with 2 in insulation U-Value: 0.6746 W/(m² • °K)

2 1/2 in wood with 2 in (50 mm) insulation
Value Heat
°K)
°K)

Value Heat
°K)
°K)

Value Heat
°K)
board board °K)
°K)

2 1/2 in (65 mm) wood with 1 in (25 mm) insulation
Value Heat
°K)
board board °K)
°K)

Value Heat
°K)
board board °K)
°K)

Value Heat

Value Heat

Value Heat

U-Value: 0.5103 W/(m² • °K)

insulation
Value Heat
U-Value: 0.5181 W/(m² • °K)

insulation
Value Heat

U-Value: 0.5261 W/(m² • °K)

insulation
Value Heat

U-Value: 0.7305 W/(m² • °K)

insulation
Value Heat
board board °K)

U-Value: 0.7465 W/(m² • °K)

insulation
Value Heat
board board °K)
2 in heavyweight concrete with 1 in U-Value: 0.7632 W/(m² • °K)

insulation
Value Heat
board board °K)

Value Heat
°K)
°K)

Value Heat
°K)
°K)

Value Heat
°K)
°K)

Value Heat
°K)
board board °K)
°K)

Value Heat
°K)
board board °K)
°K)

Value Heat
°K)
board board °K)
°K)

Value Heat

Value Heat

Value Heat
°K)

U-Value: 0.6819 W/(m² • °K)
insulation

Value Heat

U-Value: 0.6958 W/(m² • °K)

insulation
Value Heat

U-Value: 0.7103 W/(m² • °K)

insulation
Value Heat

U-Value: 1.1418 W/(m² • °K)

insulation
Value Heat
board board °K)

U-Value: 1.1814 W/(m² • °K)
insulation
Value Heat
board board °K)

U-Value: 1.2238 W/(m² • °K)

insulation
Value Heat
board board °K)

U-Value: 0.3244 W/(m² • °K)

insulation
Value Heat

U-Value: 0.3214 W/(m² • °K)

insulation
Value Heat

U-Value: 0.3184 W/(m² • °K)
insulation

Value Heat

U-Value: 0.2314 W/(m² • °K)

insulation
Value Heat

U-Value: 0.1641 W/(m² • °K)

insulation
Value Heat

U-Value: 0.1271 W/(m² • °K)

insulation
Value Heat

Value Heat
°K)
°K)

Value Heat
°K)
°K)

Value Heat
°K)
°K)
Concrete ballast, membrane, sheathing,
U-Value: 0.297 W/(m² • °K)

insulation, metal deck
2 in (50 mm) concrete roof ballast, membrane, sheathing, R-15 insulation board, metal deck [Source: ASHRAE]
Value Heat
°K)
°K) °K)
Inside horizontal Inside horizontal surface 0.16000 (m² - - -
- surface resistance resistance • °K)/W
Asphalt shingles, wood sheathing, R-19

U-Value: 0.235 W/(m² • °K)

Asphalt shingles, wood sheathing, R-19 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
Asphalt shingles Asphalt shingles - 0.0032 m 0.04 W/(m • °K) 1120 kg/m³ 1260 J/(kg •
°K)
°K)
Ceiling air space Ceiling air space resistance 0.18000 (m² - - -
- resistance
• °K)/W
- resistance
• °K)/W
°K)
- surface resistance resistance
• °K)/W
Slate or tile, wood sheathing, R-19 batt

U-Value: 0.239 W/(m² • °K)

Slate or tile, wood sheathing, R-19 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
°K)
°K)
Wood shingles, wood sheathing, R-19

U-Value: 0.231 W/(m² • °K)

Wood shingles, wood sheathing, R-19 batt insulation, gyp board [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
Wood shingles Wood shingles - 0.0064 m 0.04 W/(m • °K) 592 kg/m³ 1300 J/(kg •
°K)
°K)
- resistance
• °K)/W
- resistance
• °K)/W
°K)
• °K)/W
Metal roof, R-19 batt insulation, gyp

U-Value: 0.249 W/(m² • °K)

board
Metal roof, R-19 batt insulation, gyp board [Source: ASHRAE]
Value Heat
°K) °K)
°K)
(m² surface resistance resistance • °K)/W
Metal roof, R-19 batt insulation,
U-Value: 0.227 W/(m² • °K)

suspended acoustical ceiling
Metal roof, R-19 batt insulation, suspended acoustical ceiling [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K) °K)
- resistance
• °K)/W
- resistance
• °K)/W
°K)
• °K)/W
Metal roof, R-19 batt insulation U-Value: 0.255 W/(m² • °K)

Metal roof, R-19 batt insulation [Source: ASHRAE]
Value Heat
resistance (m²
°K)/W
°K) °K)
resistance (m²
°K)/W
°K)/W
Membrane, sheathing, R-10 insulation

U-Value: 0.393 W/(m² • °K)

board, wood deck
Membrane, sheathing, R-10 insulation board, wood deck [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
°K)
°K)/W
Membrane, sheathing, R-10 insulation,

U-Value: 0.329 W/(m² • °K)

wood deck, suspended ceiling
Membrane, sheathing, R-10 insulation board, wood deck, suspended acoustical ceiling [Source: ASHRAE]
Value Heat
°K)
°K)
°K)

U-Value: 0.452 W/(m² • °K)

board, metal deck
Membrane, sheathing, R-10 insulation board, metal deck [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
°K) °K)
• °K)/W
Membrane, sheathing, R-10 insulation,

U-Value: 0.370 W/(m² • °K)

metal deck, suspended ceiling
Membrane, sheathing, R-10 insulation board, metal deck, suspended acoustical ceiling [Source: ASHRAE]
Value Heat
Outside surface Outside surface resistance 0.04000 (m² - - - -
°K)
°K) °K)
Ceiling air space Ceiling air space resistance 0.18000 (m² - - - -
°K)

U-Value: 0.323 W/(m² • °K)

board, metal deck
Membrane, sheathing, R-15 insulation board, metal deck [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
°K) °K)
• °K)/W
Membrane, sheathing, R-10 plus R-15

U-Value: 0.206 W/(m² • °K)

insulation boards, metal deck
Membrane, sheathing, R-10 plus R-15 insulation boards, metal deck [Source: ASHRAE]
Value Heat
- resistance
• °K)/W
°K)
°K) °K)
Membrane, sheathing, R-15 insulation, 4
U-Value: 0.304 W/(m² • °K)

in light concrete
Membrane, sheathing, R-15 insulation board, 4 in (100 mm) lightweight concrete [Source: ASHRAE]
Value Heat
°K)

U-Value: 0.296 W/(m² • °K)

in light concrete
Value Heat
°K)

U-Value: 0.288 W/(m² • °K)

in light concrete
Value Heat
°K)
surface resistance • °K)/W

U-Value: 0.315 W/(m² • °K)

in heavy concrete
Membrane, sheathing, R-15 insulation board, 6 in (150 mm) heavyweight concrete [Source: ASHRAE]
Value Heat
°K)

U-Value: 0.313 W/(m² • °K)

in heavy concrete
Membrane, sheathing, R-15 insulation board, 8 in (200 mm) heavyweight concrete [Source: ASHRAE]
Value Heat
°K)
Membrane, concrete, R-19 insulation,

U-Value: 0.239 W/(m² • °K)

suspended ceiling
Membrane, 6 in (150 mm) heavyweight concrete, R-19 batt insulation, suspended acoustical ceiling [Source: ASHRAE]
Value Heat
°K)
°K)
°K)/W
R-10 over roof deck U-Value: 0.483402 W/(m² • °K)

ASHRAE 90.1 compliant continuous R10 insulation over roof deck [Source: GBS]
Value Heat
Blt-Up roof 3/8 in Blt-Up roof 3/8 in (1 cm) 0.05870 (m² 0.162516 W/(m 1121.400000 1465.380000
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
MinBd 2 in R-7 (IN23) R-7.0 MinBd 2 in (50 mm) 1.22317 (m² 0.050808 0.041538 W/(m 240.300000 711.756000
m • °K) kg/m³ J/(kg • °K)
°K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
R-19 wood framed roof U-Value: 0.346474 W/(m² • °K)

ASHRAE 90.1 compliant R19 wood framed roof with attic [Source: GBS]
Value Heat
Asph roll roof (AR01) Rolled roofing 0.02642 (m² - - - -
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
(BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
R-30 wood frame roof U-Value: 0.167165 W/(m² • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN05) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
(m²
)/
• °K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN04) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN05) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN05) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
(BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
R-15 over roof deck - cool roof U-Value: 0.373047 W/(m² • °K)
ASHRAE 90.1 compliant continuous R15 insulation over roof deck with reflective coating [Source: CIBSE]
Value Heat
Blt-Up roof 3/8 in Blt-Up roof 3/8 in (1 cm) 0.05870 (m² 0.009540 m 1121.400000 1465.380000
0.162516 W/(m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
MinBd 2 in R-7 (IN23) R-7.0 MinBd 2 in (50 mm) 1.22317 (m² 0.050808 m 240.300000 711.756000
0.041538 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
MinBd 2 in R-7 (IN23) R-7.0 MinBd 2 in (50 mm) 1.22317 (m² 0.050808 m 240.300000 711.756000
0.041538 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
ASHRAE 90.1 compliant continuous R20 insulation over roof deck-Cool roof [Source: CIBSE]
Value Heat
Blt-Up roof 3/8 in Blt-Up roof 3/8 in (1 cm) 0.05870 (m² 0.009540 m 1121.400000 1465.380000
0.162516 W/(m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
0.115440 W/(m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
R-18.7 over roof deck U-Value: 0.303780 W/(m² • ° K)

ASHRAE 90.1 compliant continuous R18.7 insulation over roof deck [Source: CIBSE]
Value Heat
(BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
ASHRAE 90.1 compliant continuous R30 insulation over roof deck [Source: CIBSE]
Value Heat
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
R-18.7 over roof deck - cool roof U-Value: 0.303780 W/(m² • °K)
ASHRAE 90.1 compliant continuous R18.7 insulation over roof deck [Source: CIBSE]
Value Heat
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
m • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
Blt-Up roof 3/8 in Blt-Up roof 3/8 in (1 cm) 0.05870 (m² 0.009540 0.162516 W/(m 1121.400000 1465.380000
(BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
MinBd 7/8 in R-3 R-3.0 MinBd 7/8 in (2.2 cm) 0.53491 0.022219 m 0.041538 W/(m 240.300000 711.756000
(N21) • °K)/W • °K) kg/m³ J/(kg • °K)
MinBd 7/8 in R-3 R-3.0 MinBd 7/8 in (2.2 cm) 0.53491 0.022219 m 0.041538 W/(m 240.300000 711.756000
(N21) • °K)/W • °K) kg/m³ J/(kg • °K)
(WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
R-38 over roof deck-cool roof U-Value: 0.148155 W/(m² • °K)

Value Heat
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN24) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
MinBd 7/8 in R-3 R-3.0 MinBd 7/8 in (2.2 cm) 0.53491 (m² 0.041538 W/(m 240.300000 711.756000
0.022219 m (N21) • °K)/W • °K) kg/m³ J/(kg • °K)
MinBd 7/8 in R-3 R-3.0 MinBd 7/8 in (2.2 cm) 0.53491 (m² 0.041538 W/(m 240.300000 711.756000
0.022219 m (N21) • °K)/W • °K) kg/m³ J/(kg • °K)
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN04) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
R-50 over roof deck-cool roof U-Value: 0.114398 W/(m² • °K)

Value Heat
0.009540 m (BR01) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN04) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
0.019049 m (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)

ASHRAE 90.1 compliant R13 wood framed roof [Source: CIBSE]
Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
Cellulose 3 1/2 in R- Cellulose 3 1/2 in (8.9 cm) 2.28304 0.088906 m 0.038942 W/(m 48.060000 1381.644000
13 (IN13) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN02) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² R11 (IN11) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
Insul Bd 2 in (HF-B3) Insul Bd 2 in (3.1 cm) 1.17637 (m² 0.050899 m 0.043268 W/(m 32.040000 837.360000
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN05) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN02) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(IN05) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
GypBd 5/8 in (GP02) GypBd 5/8 in (1.6 cm) 0.09908 (m² 0.160266 W/(m
0.015879 m • °K) J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(m² R11 (IN11) • °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)

Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
MinBd 2 in R-7 (IN23) R-7.0 MinBd 2 in (50 mm) 1.22317 (m² 0.050808 m 0.041538 W/(m 240.300000 711.756000
• °K)/W • °K) kg/m³ J/(kg • °K)
MinBd 2 in R-7 (IN23) R-7.0 MinBd 2 in (50 mm) 1.22317 (m² 0.050808 m 0.041538 W/(m 240.300000 711.756000
• °K)/W • °K) kg/m³ J/(kg • °K)
• °K)/W • °K) kg/m³ J/(kg • °K)
R-0 wood or steel frame roof U-Value: 4.835096 W/(m² • °K)

R0 wood or steel framed roof [Source: CIBSE]
Value Heat
(BR01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
Plywd 5/8 in (PW04) Plywd 5/8 in (1.6 cm) 0.13755 0.015879 m 0.115440 W/(m 544.680000 1214.172000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

R0 insulation over roof deck [Source: CIBSE]
Value Heat
(BR01) (m² • °K) kg/m³ J/(kg • °K)
• °K)/W
(m²
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W

R60 insulation over roof deck [Source: CIBSE]
Value Heat
(BR01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(m²
°K)/W
(IN04) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN05) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(WD01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
R-19 insulation over concret deck U-Value: 0.286936 W/(m² • °K)

R19 insulation over concrete deck [Source: CIBSE]
Value Heat
(BR01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Polyurethane 3 in Polyurethane 3 in (7.6 cm) 3.31014 0.076196 m 0.023019 W/(m 24.030000 1590.984000
(IN46) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
140lb 6 in (CC04) (15.2 cm) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
R-38 attic ceiling U-Value: 0.136704 W/(m² • °K)

R38 over gypboard [Source: CIBSE]
Value Heat
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(IN02) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

Value Heat
(IN01) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(IN03) (m² • • °K) kg/m³ J/(kg • °K)
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W

2001 title 24 compliant R11 wood framed roof with attic [Source: CIBSE]
Value Heat
• °K)/W
• °K)/W
(m² (WD01) • °K)/W • °K) kg/m³ J/(kg • °K)
(m² 2x4 frame factor • °K)/W
• °K)/W • °K) kg/m³ J/(kg • °K)
R-22 insulated panels U-Value: 0.237473 W/(m² • °K)

Structurally ins. panel (SIP) 6 1/2 in (162 mm) roof, 48 in o.c., R-22 insulation [Source: CIBSE]
Value Heat
Asph siding (AR02) Shingle and siding 0.07749 (m² - - - -
• °K)/W
• °K)/W
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
- w/48 in oc SIP roof mm) including SIP roof
• °K)/W
frame frame factor
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W • °K) J/(kg • °K)

Structurally ins. panel (SIP) roof 8 1/4 in (210 mm) thick, 48 in o.c., R-28 insulation [Source: CIBSE]
Value Heat
• °K)/W
• °K)/W
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
frame frame factor
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)

Structurally ins. panel (SIP) roof 10 1/4 in (260 mm)thick, 48 in o.c., R-36 insulation [Source: CIBSE]
Value Heat
• °K)/W
• °K)/W
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
• °K)/W
frame frame factor
0.115440 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
0.160266 W/(m kg/m³ J/(kg • °K)
°K)/W °K)
Ballast, 2 in polystyrene, screed,

U-Value: 0.51 W/(m² • °K)
concrete, plaster
Ballast (chips or paving slab), 2 in (50 mm) extruded polystyrene insulation, waterproof roof covering, 3 in (75 mm) screed, 6 in (150 mm)
cast concrete, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
Ballast (chips or Ballast (chips or paving - -m 0.96 W/(m • °K) 1800 kg/m³ 1000 J/(kg •
paving slab) slab) °K)
Extruded polystyrene Extruded polystyrene - 0.050 m 0.035 W/(m • 25 kg/m³ 1400 J/(kg •
Waterproof roof Waterproof roof covering - -m 0.19 W/(m • °K) 960 kg/m³ 840 J/(kg •
covering °K)
°K)
(dense)
Ballast, 4 in polystyrene, screed,

U-Value: 0.30 W/(m² • °K)
concrete, plaster
Ballast (chips or paving slab), 4 in (100 mm) extruded polystyrene insulation, waterproof roof covering, 3 in (75 mm) screed, 6 in (150 mm)
cast concrete, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
Ballast (chips or Ballast (chips or paving - -m 0.96 W/(m • °K) 1800 kg/m³ 1000 J/(kg •
paving slab) slab) °K)
4 in Extruded 4 in (100 mm) Extruded - 0.100 m 0.035 W/(m • 25 kg/m³ 1400 J/(kg •
polystyrene insulation polystyrene insulation °K) °K)
covering °K)
°K)
°K)
(dense) °K)
Waterproof covering, screed, cast

U-Value: 2.05 W/(m² • °K)
Waterproof covering, 3 in (75 mm) screed, 6 in (150 mm) cast concrete, 1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
covering °K)
°K)
°K)
(dense) °K)
Waterproof covering, polyurethane,

U-Value: 0.53 W/(m² • °K)
screed, concrete, plaster
Waterproof roof covering, 1 1/4 in (32 mm) polyurethane insulation, vapor control layer, 3 in (75 mm) screed, 6 in (150 mm) cast concrete,
1/2 in (12 mm) dense plaster [Source: CIBSE]
Value Heat
covering °K)
1 1/4 in polyurethane 1 1/4 in (32 mm) - 0.035 m 0.025 W/(m • 30 kg/m³ 1400 J/(kg •
insulation polyurethane insulation °K) °K)
Vapour control layer Vapour control layer - -m - W/(m • °K) - kg/m³ - J/(kg • °K)
°K)
°K)
(dense) °K)

U-Value: 0.22 W/(m² • °K)
Waterproof roof covering, 4 in (100 mm) polyurethane insulation, vapour control layer, 3 in (75 mm) screed, 6 in (150 mm) cast concrete,
Value Heat
covering °K)
4 in polyurethane 4 in (100 mm) polyurethane - 0.100 m 0.025 W/(m • 30 kg/m³ 1400 J/(kg •
°K)
°K)
(dense) °K)

U-Value: 0.12 W/(m² • °K)
Waterproof roof covering, 8 in (200 mm) polyurethane insulation, vapour control layer, 3 in (75 mm) screed, 6 in (150 mm) cast concrete,
Value Heat
covering °K)
°K)
°K)
(dense) °K)
Waterproof covering, timber decking,

U-Value: 1.87 W/(m² • °K)
plasterboard
Waterproof roof covering, 3/4 in (19 mm) timber decking, ventilated airspace, vapour control layer, 1/2 in (12 mm) plasterboard [Source:
CIBSE]
Value Heat
covering °K)
Timber decking Timber decking - 0.019 m 0.14 W/(m • °K) 650 kg/m³ 1200 J/(kg •
°K)
Flat roof airspace Flat roof airspace 0.16000 (m² -m - W/(m • °K) - kg/m³
- J/(kg • °K)
°K)/W
- 0.012 m 0.16 W/(m • °K) 950 kg/m³ 840 J/(kg •
°K)
Waterproof covering, mineral fiber

U-Value: 0.51 W/(m² • °K)
insulation, plasterboard
Waterproof roof covering, 3/4 in (19 mm) timber decking, ventilated airspace, 2 in (50 mm) mineral fiber insulation, vapour control layer,
1/2 in (12 mm) plasterboard [Source: CIBSE]
Value Heat
covering °K)
°K)
Flat roof airspace Flat roof airspace 0.16000 (m² -m - W/(m • °K) - kg/m³
- J/(kg • °K)
°K)/W
°K)
Waterproof covering, 1 1/4 in

U-Value: 0.52 W/(m² • °K)
polyurethane, decking, plasterboard
Waterproof roof covering, 1 1/4 in (32 mm) polyurethane insulation, vapour control layer, 3/4 in (19 mm) timber decking, unventilated
airspace, 1/2 in (12 mm) plasterboard [Source: CIBSE]
Value Heat
covering °K)
1 1/4 in polyurethane 1 1/4 in (32 mm) - 0.035 m 0.025 W/(m • 30 kg/m³ 1400 J/(kg •
insulation polyurethane insulation °K) °K)
°K)
Pitched roof airspace Pitched roof airspace 0.18000 (m² -m - W/(m • °K) - kg/m³
- J/(kg • °K)
°K)/W
°K)
Waterproof covering, 4 in polyurethane,

U-Value: 0.22 W/(m² • °K)
decking, plasterboard
Waterproof roof covering, 4 in (100 mm) polyurethane insulation, vapour control layer, 3/4 in (19 mm) timber decking, unventilated
Value Heat
covering °K)
°K)
Pitched roof airspace Pitched roof airspace 0.18000 -m - W/(m • °K) - kg/m³ - J/(kg • °K)
(m²
• °K)/W
°K)
Waterproof covering, 8 in polyurethane,

U-Value: 0.12 W/(m² • °K)
decking, plasterboard
Waterproof roof covering, 8 in (200 mm) polyurethane decking, insulation, vapour control layer, 3/4 in (19 mm) timber unventilated
Value Heat
covering °K)
°K)
Pitched roof airspace Pitched roof airspace 0.18000 (m² -m - W/(m • °K) - kg/m³
- J/(kg • °K)
°K)/W
°K)
Slabs
Standard slab construction - A U-Value: 0.2499 W/(m² • °K)

Standard slab construction
Value Heat
• °K)
Concrete cast dense Concrete cast dense - 0.200 m 1.90 W/(m • °K) 2300 kg/m³ 840 J/(kg •
Standard slab construction - B U-Value: 0.4063 W/(m² • °K)

Standard slab construction
Value Heat
• °K)
Solid-ground floor U-Value: 0.4063 W/(m² • °K)

Solid-ground floor
Value Heat
• °K)
Suspended timber floor U-Value: 0.3857 W/(m² • °K)

Suspended timber floor
Value Heat
• °K)
Industrial solid U-Value: 0.4082 W/(m² • °K)

Solid-ground floor - industry
Value Heat
• °K)
Un-insulated solid U-Value: 0.7059 W/(m² • °K)

Un-insulated Solid-ground floor
Value Heat
• °K)
Un-insulated suspended timber U-Value: 0.6278 W/(m² • °K)

Un-insulated Suspended timber floor
Value Heat
• °K)
Super-insulated U-Value: 0.2756 W/(m² • °K)

Super-insulated floor
Value Heat
• °K)
R-34 insulation R-34 insulation 34 (m² • - - - -
°K)/W
Slab edge uninsulated U-Value: 0.27 W/(m² • °K)

Slab edge uninsulated [Source: GBS]
Value Heat
UG surface fictitious Fictitious insulation place 5.28331 - - - -
insulation holder (m² •
°K)/W
Soil 8 in Soil 8 in (20.3 cm) 0.11799 • 0.204206 m 1.730735 W/(m 1842.300000 837.360000
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
Conc heavyweight Conc heavyweight 140lb 0.15497 • 0.203200 m 1.311205 W/(m 2242.800000 837.360000
140lb 8 in (CC05) 8 in (20.3cm) (m² • °K) kg/m³ J/(kg • °K)
°K)/W
Carpet fiber pad (CP01) With fibrous pad 0.36631 • - - - -
(m²
°K)/W
Slab edge R-5 insulation U-Value: 0.15 W/(m² • °K)

Slab edge R-5 insulation [Source: GBS]
Value Heat
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m²
°K)/W
Value Heat
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m²
°K)/W

Value Heat
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m²
°K)/W

Value Heat
UG surface fictitious Fictitious insulation place 5.2833` - - - -
°K)/W
(m² • °K) kg/m³ J/(kg • °K)
°K)/W
°K)/W
(m²
°K)/W

Constructions Revised

Uploaded by

Copyright:

Available Formats

Constructions Revised

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Constructions Revised

Uploaded by

Copyright:

Available Formats

MEP Constructions for Buildings and Spaces

8 in lightweight concrete ceiling U-Value: 1.3610 W/(m² • °K )

4 in reinforced-concrete ceiling U-Value: 3.6842 W/(m² • °K )

Carpeted 4 in reinforced-concrete ceiling U-Value: 2.2826 W/(m² • °K)

8 in reinforced-concrete ceiling U-Value: 2.9167 W/(m² • °K )

5 in reinforced-concrete ceiling (screeded) U-Value: 2.4275 W/(m² • °K )

5 in concrete ceiling U-Value: 3.4146 W/(m² • °K )

5 in concrete ceiling (screeded) U-Value: 2.4108 W/(m² • °K )

1/2 in plaster with TG boards on 16 in

Plaster, wood boards, glass wool on joists U-Value: 0.8226 W/(m² • °K )

12 in reinforced-concrete ceiling U-Value: 2.4138 W/(m² • °K )

2 in screed, 6 in cast concrete U-Value: 2.1993 W/(m² • °K )

Wood blocks, screed, 6 in concrete U-Value: 1.5791 W/(m² • °K)

Wood blocks, concrete, batting, gypsum U-Value: 0.7457 W/(m² • °K)

Wood blocks, concrete, batting, metal

Concrete slab internal U-Value: 1.0687 W/(m² • °K)

Timber-joist internal U-Value: 1.2585 W/(m² • °K)

2 in heavyweight concrete with false

4 in heavyweight concrete with false

4 in lightweight concrete with false ceiling U-Value: 1.0411 W/(m² • °K )

8 in heavyweight concrete with false

8 in lightweight concrete with false ceiling U-Value: 0.8144 W/(m² • °K )

2 in wood deck with false ceiling U-Value: 0.8985 W/(m² • °K )

3 in wood deck with false ceiling U-Value: 0.7559 W/(m² • °K)

12 in heavyweight concrete with false

4 in wood deck with false ceiling U-Value: 0.6524 W/(m² • °K)

Steel deck with false ceiling U-Value: 1.4427 W/(m² • °K )

Ceiling below joists, no insulation U-Value: 1.3683 W/(m² • °K)

Ceiling below joists, R-10 board insulation U-Value: 0.4315 W/(m² • °K )

Ceiling below joists, R-11 blanket or loose

Ceiling below joists, R-13 blanket or loose

Ceiling below joists, R-15 blanket or loose

Ceiling below joists, R-19 blanket or loose

Ceiling below joists, R-21 blanket or loose

Ceiling below joists, R-30 blanket or loose

Ceiling below joists, R-38 blanket or loose

Exposed beams, 1 1/2 in wood, no

Exposed beams, 1 1/2 in wood plus R-2

Exposed beams, 1 1/2 in wood plus R-3

Exposed beams, 2 in cement-fiber slab, no U-Value: 0.8119 W/(m² • °K )

Exposed beams, 1 1/2 in wood plus R-4

Exposed beams, 1 1/2 in wood plus R-5

Exposed beams, 3 in cement-fiber slab, no U-Value: 0.6472 W/(m² • °K )

Exposed beams, 1 1/2 in wood plus R-6

Exposed beams, 1 1/2 in wood plus R-7

Exposed beams, 1 1/2 in wood plus R-10

Exposed beams, 1 1/2 in wood plus R-12

Exposed beams, 1 1/2 in wood plus R-15

Exposed beams, 1 1/2 in wood plus R-17

Exposed beams, 1 1/2 in wood plus R-20

Exposed beams, 1 1/2 in wood plus R-21

Exposed beams, 1 1/2 in wood plus R-24

Exposed beams, 1 1/2 in wood plus R-27

Exposed beams, 1 1/2 in wood plus R-30

Exposed beams, 1 1/2 in wood plus R-33

Wood block, concrete, plasterboard U-Value: 1.58 W/(m² • °K)

Standard wall construction - A U-Value: 0.3495 W/(m² • °K)

Standard wall construction - B U-Value: 0.2993 W/(m² • °K)

Standard wall construction - C U-Value: 0.3967 W/(m² • °K)