L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
001

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- 12" x BEVELLED END
B192-5A-12"-P- BUTT BEVELLED END SCH PIP-
1 5A-DWG-1105, SHT SP07 OS-33M 28.58 1 SCH 140 ASME _ _ 1 _ _
E1N-IS-1105 JOINT 140 ASME B36.10M 000114
2/2, REV 2 mm B36.10M ASTM A106
ASTM A106 B NACE
B NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUAR OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
ENESS T
IM SIZE ORIENTATION WPS
IMIR DULY ✘ No
HEAT ARC
✘ IR ✘
& THK FLANGE EREC. PHYSICAL SLOP
SIGNED No ✘ STRIK
ID STRADLING
✘
COORDINATES CONDITION E
MAT. PART IDENT.REPORT E VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERV ✘
APPROVED WPS AL
✘
INSTRUMENT USED ✘ID NO VALIDITY
ON PIPE GRADE ERECTED
1. WELDING SPOOLS
GUAGE WG-01
VERTICALITY ATION
CODE / SPECIFICATION / STANDARD : ASME B36.10M 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
002

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS ELBOW 45̊

C18040-PP-B192- SP03 BEVELLED END SEAMLESS LR
B192-5A-2"-WP- BUTT 2" x
1 5A-DWG-4301, SHT TO OS- 15 1 SCH 10S ASME _ _ 3 BEVELLED END SCH _ _ _
A9-4301 JOINT SCH10S
1/2, REV 0A SP04 B36.19M ASTM 10S ASME B16.9
A312-TP316 ASTM A403 WP 316

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUAR OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
ENESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘ ARC SLOP
✘
& THK FLANGE EREC. PHYSICAL
SIGNED ID No ✘ ✘ STRIK E
STRADLING COORDINATES CONDITION
MAT. PART IDENT.REPORT E VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERV ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO VALIDITY
ATION
CODE / SPECIFICATION / STANDARD : ASME B36.19M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
003

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS ELBOW 90̊̊

C18040-PP-B192- SP04 BEVELLED END SEAMLESS LR
B192-5A-2"-DF- BUTT 2" x
1 5A-DWG-6101, SHT TO OS- 27 1 SCH XS ASME _ _ 3 BEVELLED END SCH _ _ _
A1-6101 JOINT 5.54mm
3/11, REV 0 SP05 B36.10M ASTM XS ASME B16.9 ASTM
A106B A234 GRWPB

PIPE SEAMLESS TEE EQUAL

C18040-PP-B192- SP02 BEVELLED END SEAMLESS
B192-5A-2"-DF- BUTT 2" x
2 5A-DWG-6101, SHT TO OS- 12 1 SCH XS ASME _ _ 6 BEVELLED END SCH _ _ _
A1-6101 JOINT 5.54mm
2/11, REV 0 SP04 B36.10M ASTM XS ASME B16.9 ASTM
A106B A234 GRWPB

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUAR OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
ENESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘ ARC SLOP
✘
& THK FLANGE EREC. PHYSICAL
SIGNED ID No ✘ ✘ STRIK E
STRADLING COORDINATES CONDITION
MAT. PART IDENT.REPORT E VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERV ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO VALIDITY
ATION
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
004

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS ELBOW 45̊

C18040-PP-B192- SP01 BEVELLED END SEAMLESS LR
B192-5A-8"-DO- BUTT 8" x
1 5A-DWG-2264, SHT TO OS- 3 1 SCH STD ASME _ _ 2 BEVELLED END SCH _ _ _
A1-2264 JOINT 8.18mm
1/1, REV 0 SP02 B36.10M ASTM STD ASME B16.9
A106B ASTM A234 GRWPB

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUAR OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
ENESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘ ARC SLOP
✘
& THK FLANGE EREC. PHYSICAL
SIGNED ID No ✘ ✘ STRIK E
STRADLING COORDINATES CONDITION
MAT. PART IDENT.REPORT E VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERV ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO VALIDITY
ATION
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
005

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

BALL VALVE
SOCKOLET
C18040-PP-B192- SP12A FLOATING TYPE
B192-5A-2"-VG- SOCKET 0.75" x SOCKET WELDED
1 5A-DWG-2101, SHT TO FW102 8 _ _ 13 CL800 PLAIN END _ _ _
A1N-IA-2101 JOINT SCH160 SCH160,CL9000
8/8, REV 0B SP13 FULL BORE(FB) VB-45
ASTM A105NACE
NACE - LNT

ELBOW 90̊̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- B192-5A-2"-VG- SP12A BEVELLED END
BUTT 2" x BEVELLED END SCH
2 5A-DWG-2101, SHT A1N-IA- TO OS96 1 SCH160,ASME _ _ 3 _ _ _
JOINT 8.74mm 160 ASME B16.9
8/8, REV 0B 2101/2153 SP01 B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV.
✘
IM No T No ✘ IONS ✘
NESS T
SIZE ORIENTATION WPS
IMIR DULY IR
No HEAT
✘
✘
& THK FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
006

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

PIPE SEAMLESS PIPE SEAMLESS

C18040-PP-B192- BEVELLED END BEVELLED END
B192-5A-2"-VG- BUTT 2" x
1 5A-DWG-2153, SHT SP01 OS01 1 SCH160,ASME _ _ 1 SCH160,ASME _ _ _
A1N-IA-2153 JOINT 8.74mm
1/1, REV 0A B36.10M ASTM B36.10M ASTM
A106BNACE A106BNACE

ELBOW 90̊̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- BEVELLED END
B192-5A-2"-VG- BUTT 2" x BEVELLED END PIP -
2 5A-DWG-2153, SHT SP01 OS01A 3 _ 1 SCH160,ASME _ _ _
A1N-IA-2153 JOINT 8.74mm SCH 160 ASME 000338
1/1, REV 0A B36.10M ASTM
B16.9 ASTM A234
A106BNACE
GR WPB NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
NESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘
SLOP
✘
& THK FLANGE EREC. PHYSICAL ARC
SIGNED ID No ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
007

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS ELBOW 45̊

C18040-PP-B192- SP16 BEVELLED END SEAMLESS LR
B192-5A-2"-WF- BUTT 2" x
1 5A-DWG-4242, SHT TO OS- 1 1 SCH XS ASME _ _ 3 BEVELLED END SCH _ _ _
A1-4242 JOINT 5.54mm
1/7, REV 1A SP01A B36.10M ASTM STD ASME B16.9
A106B ASTM A234 GRWPB

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- SP01 BEVELLED END
B192-5A-2"-WF- BUTT 2" x BEVELLED END SCH
2 5A-DWG-4242, SHT TO OS- 1A 1 SCH XS ASME _ _ 1 _ _ _
A1-4242 JOINT 5.54mm XS ASME B36.10M
1/7, REV 1A SP01A B36.10M ASTM
ASTM A106B
A106B

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
NESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘
SLOP
✘
& THK FLANGE EREC. PHYSICAL ARC
SIGNED ID No ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
008

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS ELBOW 90̊

C18040-PP-B192- SP05 BEVELLED END SEAMLESS LR
B192-5A-6"-P- BUTT 6" x
1 5A-DWG-1239, SHT TO OS-22 1 SCH 80 ASME _ _ 3 BEVELLED END SCH _ _ _
E1N-IS-1239 JOINT 10.97mm
2/3, REV 0B SP06 B36.10M ASTM A106 80 ASME B16.9 ASTM
B NACE A234 GR WPB NACE

ELBOW 90̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- SP06
B192-5A-6"-P- BUTT 6" x BEVELLED END BEVELLED END SCH
2 5A-DWG-1239, SHT TO OS-24 3 _ _ 1 _ _ _
E1N-IS-1239 JOINT 10.97mm SCH 80 ASME B16.9 80 ASME B36.10M
2/3, REV 0B SP06A
ASTM A234 GR WPB ASTM A106 B NACE
NACE

ELBOW 90̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- SP06A
B192-5A-6"-P- BUTT 6" x BEVELLED END BEVELLED END SCH
3 5A-DWG-1239, SHT TO OS-26 3 _ _ 1 _ _ _
E1N-IS-1239 JOINT 10.97mm SCH 80 ASME B16.9 80 ASME B36.10M
2/3, REV 0B SP07
ASTM A234 GR WPB ASTM A106 B NACE
NACE

PIPE SEAMLESS ELBOW 90̊

C18040-PP-B192- SP07 BEVELLED END SEAMLESS LR
B192-5A-6"-P- BUTT 6" x
4 5A-DWG-1239, SHT TO OS-29 1 SCH 80 ASME _ _ 3 BEVELLED END SCH _ _ _
E1N-IS-1239 JOINT 10.97mm
2/3, REV 0B SP08 B36.10M ASTM A106 80 ASME B16.9 ASTM
B NACE A234 GR WPB NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN WITH NE SPL JOIN W.E.P AS PER DIMENS SQUAREN OFFSE
✘ ✘
IM
✘
No
✘
T No DIR & ✘
IONS ✘
LATEST REV. ✘
WPS ESS T
IR SIZE ORIENTATION
IMIR DULY No HEAT ✘
SLOP
✘ ✘
& THK FLANGE EREC. PHYSICAL ARC
SIGNED No ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
009

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

ELBOW 90̊̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- BEVELLED END
B192-5A-2"-GI- SP1 TO BUTT 2" x BEVELLED END SCH
1 5A-DWG-5491, SHT OS3 1 SCH160,ASME _ _ 2 _ _ _
A1N-IH-5491 SP01A JOINT 8.74mm 160 ASME B16.9
1/5, REV 0 B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV.
✘
IM No T No ✘ IONS ✘
NESS T
SIZE ORIENTATION WPS
IMIR DULY IR
No HEAT
✘
✘
& THK FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
010

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

ELBOW 90̊ ELBOW 90̊

SEAMLESS LR SEAMLESS LR
C18040-PP-B192- SP03
B192-5A-6"-P- BUTT 6" x BEVELLED END BEVELLED END SCH
1 5A-DWG-1223, SHT TO OS-7 3 _ _ 3 _ _ _
E1N-1223 JOINT 18.26mm SCH 160 ASME 160 ASME B16.9
1/1, REV 0B SP04
B16.9 ASTM A234 ASTM A234 GR WPB
GR WPB NACE NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS PER ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
011

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP10 BEVELLED END
B192-5A-6"-P- BUTT 6" x PIP- BEVELLED END SCH
1 5A-DWG-1086, SHT TO OS92 1 SCH 160 ASME _ 3 _ _ _
E1N-IS-1086 JOINT 18.26mm 000001-2 160 ASME B16.9
8/8, REV 0A SP11A B36.10M A106 B
ASTM A234 GR WPB
NACE
NACE

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- SP11A BEVELLED END
B192-5A-6"-P- BUTT 6" x PIP- BEVELLED END SCH PIP-
2 5A-DWG-1086, SHT TO OS92A 1 SCH 160 ASME _ 1 _ _
E1N-IS-1086 JOINT 18.26mm 000001-2 160 ASME B36.10M 000001-2
8/8, REV 0A SP11 B36.10M A106 B
A106 B NACE
NACE

ELBOW 90̊ ELBOW 90̊

SEAMLESS LR SEAMLESS LR
C18040-PP-B192- SP11
B192-5A-6"-P- BUTT 6" x BEVELLED END BEVELLED END SCH
3 5A-DWG-1086, SHT TO OS94 3 _ _ 3 _ _ _
E1N-IS-1086 JOINT 18.26mm SCH 160 ASME 160 ASME B16.9
8/8, REV 0A SP12
B16.9 ASTM A234 ASTM A234 GR WPB
GR WPB NACE NACE
ELBOW 90̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192-
B192-5A-6"-P- BUTT 6" x BEVELLED END BEVELLED END SCH
4 5A-DWG-1086, SHT SP12 OS95M 3 _ _ 1 _ _ _
E1N-IS-1086 JOINT 18.26mm SCH 160 ASME 160 ASME B36.10M
8/8, REV 0A
B16.9 ASTM A234 A106 B NACE
GR WPB NACE

ELBOW 90̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- B192-5A-6"-P- SP12
BUTT 6" x BEVELLED END BEVELLED END SCH
5 5A-DWG-1086, SHT E1N-IS- TO OS01 3 _ _ 1 _ _ _
JOINT 18.26mm SCH 160 ASME 160 ASME B36.10M
8/8, REV 0A 1086/1230 SP01
B16.9 ASTM A234 A106 B NACE
GR WPB NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
PER WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE VISU
MAT. PART IDENT.REPORT ID
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE ✘
GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
012

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

TEE EQUAL REDUCER

SEAMLESS ECCENTRIC
C18040-PP-B192- B192-5A-12"-P- SP05 12" x
BUTT BEVELLED END SEAMLESS BEVELED
1 5A-DWG-1105, SHT E1N-IS- TO FW-40 28.58 5 _ _ 7 _ _ _
JOINT SCH 140 ASME END SCH 140 ASME
2/2, REV 2 1105/1201 SP11 mm
B16.9 ASTM A234 B16.9 ASTM A234 GR
GR WPB NACE WPB NACE

ELBOW 90̊̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP04 12" x BEVELLED END
B192-5A-12"-P- BUTT BEVELLED END SCH
2 5A-DWG-1105, SHT TO OS-12 28.58 1 SCH 140 ASME _ _ 3 _ _ _
E1N-IS-1105 JOINT 140 ASME B16.9
2/2, REV 2 SP4B mm B36.10M ASTM A106
ASTM A234 GR WPB
B NACE
NACE

SOCKOLET
PIPE SEAMLESS
C18040-PP-B192- SP4A SOCKET WELDED
B192-5A-12"-P- SOCKE 12" x PLAIN END SCH XXS
3 5A-DWG-1105, SHT TO OS-15 8 SCH 140, CL 9000 _ _ 2 _ _ _
E1N-IS-1105 T JOINT 0.75" ASME B36.10M ASTM
2/2, REV 2 SP4B MSS-SP-97 ASTM
A106 B NACE
A105 NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS PER ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT ID VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
013

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- SP09 BEVELLED END
B192-5A-4"-SW- BUTT 4" x BEVELLED END SCH
1 5A-DWG-4402, SHT TO OS- 23 1 SCH 80 ASME _ _ 1 _ _ _
A1-4402 JOINT 8.56mm 80 ASME B36.10M
1/1, REV 0A SP10 B36.10M ASTM
ASTM A106B
A106B

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
NESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘
SLOP
✘
& THK FLANGE EREC. PHYSICAL ARC
SIGNED ID No ✘
STRADLING
✘
COORDINATES CONDITION STRIKE E
MAT. PART IDENT.REPORT VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
014

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- SP08 BEVELLED END
B192-5A-6"-WI- BUTT 6" x BEVELLED END SCH
1 5A-DWG-1806, SHT TO OS- 40 1 SCH 80 ASME _ _ 1 _ _ _
A1-1806 JOINT 10.97mm 80 ASME B36.10M
4/4, REV 0A SP09 B36.10M ASTM
ASTM A106B
A106B

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
NESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘
SLOP
✘
& THK FLANGE EREC. PHYSICAL ARC
SIGNED ID No ✘
STRADLING
✘
COORDINATES CONDITION STRIKE E
MAT. PART IDENT.REPORT VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
015

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- SP4C BEVELLED END
B192-5A-8"-SV- BUTT 8" x BEVELLED END SCH
1 5A-DWG-2315, SHT TO OS- 24 1 SCH STD ASME _ _ 1 _ _ _
A1-2315 JOINT 8.18mm STD ASME B36.10M
2/2, REV 1C SP05 B36.10M ASTM
ASTM A106B
A106B

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
NESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘
SLOP
✘
& THK FLANGE EREC. PHYSICAL ARC
SIGNED ID No ✘
STRADLING
✘
COORDINATES CONDITION STRIKE E
MAT. PART IDENT.REPORT VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
016

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. ( INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- SP14 BEVELLED END
B192-5A-8"-WF- BUTT 8" x BEVELLED END SCH
1 5A-DWG-4205, SHT TO OS- 40 1 SCH STD ASME _ _ 1 _ _ _
A1-4205 JOINT 8.18mm STD ASME B36.10M
2/2, REV 0 SP15 B36.10M ASTM
ASTM A106B
A106B

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV. No T No ✘ IONS ✘
NESS T
IM SIZE ORIENTATION WPS
IMIR DULY No
IR HEAT ✘
SLOP
✘
& THK FLANGE EREC. PHYSICAL ARC
SIGNED ID No ✘
STRADLING
✘
COORDINATES CONDITION STRIKE E
MAT. PART IDENT.REPORT VISUA
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS L
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING SPOOLS
GUAGE
VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
017

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP07 BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END
1 5A-DWG-1221, SHT TO OS-29 3 _ _ 1 SCH160,ASME _ _ _
E1N-1221 JOINT 18.26mm SCH 160 ASME
2/2, REV 0A SP08 B36.10M ASTM
B16.9 ASTM A234
A106BNACE
GR WPB NACE
ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP08 BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END
2 5A-DWG-1221, SHT TO OS-31 3 _ _ 1 SCH160,ASME _ _ _
E1N-1221 JOINT 18.26mm SCH 160 ASME
2/2, REV 0A SP09 B36.10M ASTM
B16.9 ASTM A234
A106BNACE
GR WPB NACE
ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP09 BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END
3 5A-DWG-1221, SHT TO OS-33 3 _ _ 1 SCH160,ASME _ _ _
E1N-1221 JOINT 18.26mm SCH 160 ASME
2/2, REV 0A SP10 B36.10M ASTM
B16.9 ASTM A234
A106BNACE
GR WPB NACE
ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP10 BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END SCH
4 5A-DWG-1221, SHT TO OS-36 1 SCH160,ASME _ _ 3 _ _ _
E1N-1221 JOINT 18.26mm 160 ASME B16.9
2/2, REV 0A SP11 B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE

ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP11 BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END SCH
5 5A-DWG-1221, SHT TO OS-40 1 SCH160,ASME _ _ 3 _ _ _
E1N-1221/1236 JOINT 18.26mm 160 ASME B16.9
2/2, REV 0A SP01 B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
PER WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE VISU
MAT. PART IDENT.REPORT ID
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
018

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS PIPE SEAMLESS

C18040-PP-B192- BEVELLED END BEVELLED END
B192-5A-6"-P- BUTT 6" x PIP-
1 5A-DWG-1221, SHT SP10 OS-33A 1 SCH160,ASME _ 1 SCH160,ASME _ _ _
E1N-1221 JOINT 18.26mm 000001
2/2, REV 0A B36.10M ASTM B36.10M ASTM
A106BNACE A106BNACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
PER WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE VISU
MAT. PART IDENT.REPORT QC SIGN/STAMP EREC. PRESERVATI ✘
APPROVED WPS
✘
MAT. SPEC & PAINTING ICS FOR ✘ AL
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
019

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

PIPE SEAMLESS ELBOW 90̊

C18040-PP-B192- SP11 BEVELLED END SEAMLESS LR
B192-5A-6"-P- BUTT 6" x
1 5A-DWG-7522, SHT TO OS-31 1 SCH 80 ASME _ _ 3 BEVELLED END SCH _ _ _
E1N-IH-7522 JOINT 10.97mm
4/4, REV 0C SP11A B36.10M ASTM A106 80 ASME B16.9 ASTM
B NACE A234 GR WPB NACE

ELBOW 90̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192-
B192-5A-6"-P- BUTT 6" x BEVELLED END BEVELLED END SCH
2 5A-DWG-7522, SHT SP11A OS-29A 3 PIP-000039 _ 1 _ _ _
E1N-IH-7522 JOINT 10.97mm SCH 80 ASME B16.9 80 ASME B36.10M
4/4, REV 0C
ASTM A234 GR WPB ASTM A106 B NACE
NACE

PIPE SEAMLESS ELBOW 90̊

C18040-PP-B192- BEVELLED END SEAMLESS LR
B192-5A-6"-P- BUTT 6" x PIP-
3 5A-DWG-7522, SHT SP11A OS-29B 1 SCH 80 ASME PIP-000001 _ 3 BEVELLED END SCH _ _
E1N-IH-7522 JOINT 10.97mm 000039
4/4, REV 0C B36.10M ASTM A106 80 ASME B16.9 ASTM
B NACE A234 GR WPB NACE

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- SP11A BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END SCH PIP-
4 5A-DWG-7522, SHT TO OS-29C 1 SCH 80 ASME _ _ 1 _ _
E1N-IH-7522 JOINT 10.97mm 80 ASME B36.10M 000001
4/4, REV 0C SP10 B36.10M ASTM A106
ASTM A106 B NACE
B NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS PER ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT ID VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
020

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP08 BEVELLED END
B192-5A-10"-P- BUTT 10" x BEVELLED END SCH
1 5A-DWG-1201, SHT TO OS-35 1 SCH 140 ASME _ _ 3 _ _ _
E1N-IS-1201 JOINT 25.4mm 140 ASME B16.9
3/3, REV 0 SP09 B36.10M ASTM A106
ASTM A234 GR WPB
B NACE
NACE

ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP09 BEVELLED END
B192-5A-10"-P- BUTT 10" x BEVELLED END SCH
2 5A-DWG-1201, SHT TO OS-37 1 SCH 140 ASME _ _ 3 _ _ _
E1N-IS-1201 JOINT 25.4mm 140 ASME B16.9
3/3, REV 0 SP10 B36.10M ASTM A106
ASTM A234 GR WPB
B NACE
NACE

REDUCER
PIPE SEAMLESS
ECCENTRIC SMLS
C18040-PP-B192- SP10 BEVELLED END
B192-5A-10"-P- BUTT 10" x BEVELLED END SCH
3 5A-DWG-1201, SHT TO OS-39 1 SCH 140 ASME _ _ 7
E1N-IS-1201 JOINT 25.4mm 140 X SCH140 ASME
3/3, REV 0 SP11 B36.10M ASTM A106
B16.9 ASTM A234GR
B NACE
WPB

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS PER ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT ID VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
021

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
TYPE MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. OF ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. INCH X DESCRIPTION NO. DESCRIPTION NO.
JOINT
MM )

ELBOW 45°
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END SCH PIP-
1 5A-DWG-1223, SHT SP03 OS-5 1 SCH160,ASME _ _ 4 _ _
E1N-1223 JOINT 18.26mm 160 ASME B16.9 000039
1/1, REV 0B B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE
ELBOW 45°
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END PIP- PIP-
2 5A-DWG-1223, SHT SP02 4M 4 _ 1 SCH160,ASME _ _
E1N-1223 JOINT 18.26mm SCH 160 ASME 000039 000001
1/1, REV 0B B36.10M ASTM
B16.9 ASTM A234
A106BNACE
GR WPB NACE
ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- BEVELLED END
B192-5A-6"-P- BUTT 6" x PIP- BEVELLED END SCH
3 5A-DWG-1223, SHT SP02 3M 1 SCH160,ASME _ 3 _ _ _
E1N-1223 JOINT 18.26mm 000001 160 ASME B16.9
1/1, REV 0B B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE
ELBOW 90̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP01 BEVELLED END
B192-5A-6"-P- BUTT 6" x BEVELLED END SCH
4 5A-DWG-1223, SHT TO 1M 1 SCH160,ASME _ _ 3 _ _ _
E1N-1223 JOINT 18.26mm 160 ASME B16.9
1/1, REV 0B SP02 B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS PER ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M/ASME B 16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
022

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

SOCKOLET
PIPE SEAMLESS
C18040-PP-B192- SP05 SOCKET WELDED
B192-5A-12"-P- SOCKET 12" x PLAIN END SCH XXS
1 5A-DWG-1105, SHT TO OS-23 8 SCH 140, CL 9000 _ _ 2 _ _ _
E1N-IS-1105 JOINT 0.75" ASME B36.10M ASTM
2/2, REV 2 SP06 MSS-SP-97 ASTM
A106 B NACE
A105 NACE

ELBOW 90̊̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- SP05 12" x
B192-5A-12"-P- BUTT BEVELLED END BEVELLED END SCH
2 5A-DWG-1105, SHT TO OS-30 28.58 3 _ _ 1 _ _ _
E1N-IS-1105 JOINT SCH 140 ASME 140 ASME B36.10M
2/2, REV 2 SP07 mm
B16.9 ASTM A234 ASTM A106 B NACE
GR WPB NACE
ELBOW 90̊̊ ELBOW 90̊̊
SEAMLESS LR SEAMLESS LR
C18040-PP-B192- 12" x
B192-5A-12"-P- BUTT BEVELLED END BEVELLED END SCH PIP-
3 5A-DWG-1105, SHT SP07 OS-32A 28.58 3 _ _ 3 _ _
E1N-IS-1105 JOINT SCH 140 ASME 140 ASME B16.9 000276
2/2, REV 2 mm
B16.9 ASTM A234 ASTM A234 GR WPB
GR WPB NACE NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS PER ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
023

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. ( MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

ELBOW 90̊̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- 12" x
B192-5A-12"-P- BUTT BEVELLED END BEVELLED END SCH PIP-
1 5A-DWG-1105, SHT SP07 OS-32B 28.58 3 PIP-000276 _ 1 _ _
E1N-IS-1105 JOINT SCH 140 ASME 140 ASME B36.10M 000114
2/2, REV 2 mm
B16.9 ASTM A234 ASTM A106 B NACE
GR WPB NACE

ELBOW 90̊̊ ELBOW 90̊̊

SEAMLESS LR SEAMLESS LR
C18040-PP-B192- B192-5A-12"-P- 12" x
BUTT BEVELLED END BEVELLED END SCH
2 5A-DWG-1105, SHT E1N-IS- SP07 OS-34 28.58 3 _ _ 3 _ _ _
JOINT SCH 140 ASME 140 ASME B16.9
2/2, REV 2 1105/1232 mm
B16.9 ASTM A234 ASTM A234 GR WPB
GR WPB NACE NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION
LI VERIFICATION OF MARKING INSPECTION CHECK

APPROVED DRG/DCN NE ✘
SPL ✘
JOIN DIR & W.E.P AS PER ✘
DIMEN SQUAREN OFFSE
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
ESS T
WPS
IMIR DULY IR
No HEAT & N
✘ ✘ ✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT ID VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVATI ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ON
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
024

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

ELBOW 90̊̊
PIPE SEAMLESS
SEAMLESS LR
C18040-PP-B192- SP01 BEVELLED END
B192-5A-2"-GI- BUTT 2" x BEVELLED END SCH
1 5A-DWG-5491, SHT TO OS-6 1 SCH160,ASME _ _ 2 _ _ _
A1N-IH-5491 JOINT 8.74mm 160 ASME B16.9
1/5, REV 0 SP02 B36.10M ASTM
ASTM A234 GR WPB
A106BNACE
NACE

PIPE SEAMLESS PIPE SEAMLESS

C18040-PP-B192- BEVELLED END BEVELLED END
B192-5A-2"-GI- BUTT 2" x
2 5A-DWG-5491, SHT SP02 OS-7B 1 SCH160,ASME _ _ 1 SCH160,ASME _ _ _
A1N-IH-5491 JOINT 8.74mm
1/5, REV 0 B36.10M ASTM B36.10M ASTM
A106BNACE A106BNACE

PIPE SEAMLESS PIPE SEAMLESS

C18040-PP-B192- SP02 BEVELLED END BEVELLED END
B192-5A-2"-GI- BUTT 2" x
3 5A-DWG-5491, SHT TO OS-7A 1 SCH160,ASME _ _ 1 SCH160,ASME _ _ _
A1N-IH-5491 JOINT 8.74mm
1/5, REV 0 SP02A B36.10M ASTM B36.10M ASTM
A106BNACE A106BNACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV.
✘
IM No T No ✘ IONS ✘
NESS T
SIZE ORIENTATION WPS
IMIR DULY IR
No HEAT
✘
✘
& THK FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA ABDUL KALAM

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
025

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

PIPE SEAMLESS ELBOW 90̊̊

C18040-PP-B192- SP02 BEVELLED END SEAMLESS LR
B192-5A-8"-WI- BUTT 8" x
1 5A-DWG-1800, SHT TO OS-15 1 SCH120,ASME _ _ 4 BEVELLED END SCH _ _ _
E1-1800 JOINT 18.56mm
1/7, REV 0A SP02A B36.10M ASTM 160 ASME B16.9
A106B ASTM A234 GR WPB

SOCKOLET
PIPE SEAMLESS
C18040-PP-B192- SP01A SOCKET WELDED
B192-5A-8"-WI- SOCKET 8" x 0.75" PLAIN END SCH XXS
2 5A-DWG-1800, SHT TO OS-5 8 SCH 120, CL 9000 _ _ 2 _ _ _
E1-1800 JOINT 7.82mm ASME B36.10M ASTM
1/7, REV 0A SP01B MSS-SP-97 ASTM
A106 B
A105

PIPE SEAMLESS
PIPE SEAMLESS
C18040-PP-B192- BEVELLED END
B192-5A-8"-WI- BUTT 8" x BEVELLED END
3 5A-DWG-1800, SHT SP01A 4A 1 SCH120,ASME _ _ 1 _ _ _
E1-1800 JOINT 18.56mm SCH120,ASME
1/7, REV 0A B36.10M ASTM
B36.10M ASTM A106B
A106B

PIPE SEAMLESS ELBOW 90̊̊

C18040-PP-B192- BEVELLED END SEAMLESS LR
B192-5A-8"-WI- BUTT 8" x
4 5A-DWG-1800, SHT SP01A 3M 1 SCH120,ASME _ _ 4 BEVELLED END SCH _ _ _
E1-1800 JOINT 18.56mm
1/7, REV 0A B36.10M ASTM 160 ASME B16.9
A106B ASTM A234 GR WPB
ELBOW 90̊̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- SP01A
B192-5A-8"-WI- BUTT 8" x BEVELLED END BEVELLED END
5 5A-DWG-1800, SHT TO OS-2 4 _ _ 1 _ _ _
E1-1800 JOINT 18.56mm SCH 160 ASME SCH120,ASME
1/7, REV 0A SP01
B16.9 ASTM A234 B36.10M ASTM A106B
GR WPB
QC CHECK SHEET Checked X Not Applicable
DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV.
✘
IM No T No ✘ IONS ✘
NESS T
SIZE ORIENTATION WPS
IMIR DULY IR
No HEAT
✘
✘
& THK FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
026

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

ELBOW 90̊̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- SP01
B192-5A-8"-WI- BUTT 8" x BEVELLED END BEVELLED END
1 5A-DWG-1842, SHT TO OS-37 4 _ _ 1 _ _ _
E1-1800/1842 JOINT 18.56mm SCH 160 ASME SCH120,ASME
5/5, REV 0A SP015
B16.9 ASTM A234 B36.10M ASTM A106B
GR WPB

ELBOW 90̊̊
SEAMLESS LR PIPE SEAMLESS
C18040-PP-B192- SP15
B192-5A-8"-WI- BUTT 8" x BEVELLED END BEVELLED END
2 5A-DWG-1842, SHT TO OS-33 1 _ _ 1 _ _ _
E1-1842 JOINT 18.56mm SCH 160 ASME SCH120,ASME
5/5, REV 0A SP14
B16.9 ASTM A234 B36.10M ASTM A106B
GR WPB

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV.
✘
IM No T No ✘ IONS ✘
NESS T
SIZE ORIENTATION WPS
IMIR DULY IR
No HEAT
✘
✘
& THK FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-IT-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
01

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

IUG SYSTEM ELBOW 90̊̊

PIPE SEAMLESS
ASSEMBLY FOR V- B192-5A-2"-SV- BUTT 2" x SEAMLESS LR
1 SP-01 OS-01 _ _ _ _ BEVELLED END _ _ _
450 FOR B192-5A A10-IA-2309 JOINT 5.54mm BEVELLED END
SCH40S, SS316
PLATFORM SCH 10S SS316

IUG SYSTEM ELBOW 90̊̊

PIPE SEAMLESS
ASSEMBLY FOR V- B192-5A-2"-SV- BUTT 2" x SEAMLESS LR
2 SP-01 OS-02 _ _ _ _ BEVELLED END _ _ _
450 FOR B192-5A A10-IA-2309 JOINT 5.54mm BEVELLED END
SCH40S, SS316
PLATFORM SCH 10S SS316

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN WITH NE SPL JOIN DIMENS SQUARE OFFSE
✘ ✘ ✘ DIR & W.E.P AS PER ✘
LATEST REV.
✘
IM No T No ✘ IONS ✘
NESS T
SIZE ORIENTATION WPS
IMIR DULY IR
No HEAT
✘
✘
& THK FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVAT ✘
APPROVED WPS AL
✘
✘
ON PIPE GRADE
INSTRUMENT USED
ERECTED
1. WELDING GUAGESPOOLS VERTICALITY
ID NO
ION
VALIDITY
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 WG-01 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018
 L & T HYDROCARBON ENGINEERING LIMITED

MODULAR FABRICATION FACILITY, HAZIRA

PROJECT NAME : CLUSTER 8 MARGINAL FIELDS REPORT NO. : OFF-FIT-B192-5A-PIP-IT-

FIT UP INSPECTION REPORT (PIPING) PROJECT
W.O. NO. : MODULE NAME : B192-5A
02

CLIENT NAME : ONGC, INDIA

CONTRACT NO. : BASE MATERIAL 1 BASE MATERIAL 2

SIZE &
MI NO . REMARKS
SR ISO. DRAWING NO. SPOOL JOINT TYPE OF THK. MATERIAL HEAT MATERIAL HEAT
LINE NO. ITEM IMIR NO. ITEM IMIR NO.
NO. & REV NO. NO. NO. JOINT ( INCH X DESCRIPTION NO. DESCRIPTION NO.
MM )

ELBOW 90̊̊ FLANGE WNRTJ

SEAMLESS LR WITH JACK SCREW
C18040-PP-B192-
B192-5A-3"-VT- BUTT 3" x BEVELLED END HOLE 63AARH
1 5A-DWG-F870-9NA, SP-01 OS-01 _ _ _ _ _ _ _
E1N-F870-9NA JOINT 15.24mm SCH XXS ASME SCHXXS,CL900ASME
SHT 1/1, REV 0
B16.9 ASTM A234 B16.5
GR WPB NACE ASTMA105NACE

ELBOW 90̊̊ FLANGE WNRTJ

SEAMLESS LR WITH JACK SCREW
C18040-PP-B192-
B192-5A-3"-VT- BUTT 3" x BEVELLED END HOLE 63AARH
2 5A-DWG-F870-9NA, SP-01 OS-02 _ _ _ _ _ _ _
E1N-F870-9NA JOINT 15.24mm SCH XXS ASME SCHXXS,CL900ASME
SHT 1/1, REV 0
B16.9 ASTM A234 B16.5
GR WPB NACE ASTMA105NACE

QC CHECK SHEET Checked X Not Applicable

DOCUMENT VERIFICATION VERIFICATION OF MARKING INSPECTION CHECK
LI
APPROVED DRG/DCN NE SPL JOIN DIR & DIMEN SQUARE OFFSE
✘ ✘ W.E.P AS PER ✘
✘
WITH LATEST REV.
✘
IM No T No
SIZE ✘ ORIENTATIO SIONS ✘
NESS T
WPS
IMIR DULY IR
No HEAT & N
✘
✘
FLANGE EREC. PHYSICAL ARC SLOP
SIGNED No THK ✘ ✘
E
ID STRADLING COORDINATES CONDITION STRIKE
MAT. PART IDENT.REPORT VISU
QC SIGN/STAMP MAT. SPEC & PAINTING ICS FOR EREC. PRESERVA ✘
APPROVED WPS AL
✘
INSTRUMENT USED ✘
ID NO VALIDITY
ON PIPE GRADE ERECTED
1. WELDING GUAGESPOOLS WG-01
VERTICALITY TION
CODE / SPECIFICATION / STANDARD : ASME B36.10M / B16.9 14.02.2022
2. HIGH-LOW GUAGE HI-02 14.02.2022
STATUS SR NO.
ACCEPT
RECTIFY & REOFFER
REJECT
LTHE PRODUCTION OMTECH QC LTHE QC TPI - VCS CA - ABS
NAME VASANT RANE ABDULKADIR MULLA

SIGN.

DATE
TIME
MFF/QC/FORM/2021 REV. 4 DATE : 01-01-2018