BGH-1255F2
(12V 5.5Ah)
Rechargeable Sealed Lead Acid Battery (High Rate Series)
Technical Specification Sheet
General Series Valve Regulated
Lead Acid batteries are designed
with AGM (Absorbent Glass Mat)
technology, high performance
plates and electrolyte to gain extra Application
power output for many commonly
used applications. Special one-way · Alarm System
valves allow excessive gases to · Cable Television
escape but otherwise the battery · Communication Equipment
is completely sealed and therefore · Control Equipment
maintenance-free, leak proof and · Security System
usable in any position · Medical Equipment
· UPS
· Emergency Power System
· Toys
Performance Characteristics
Designed
Floating Life
5 Years General Features
• Superb high-rate discharge characteris-
Capacity 20HR(0.26A,1.75V) 10HR(0.5A,1.75V) 5HR(0.9A,1.75V) 1HR(4.08A,1.75V)
tics that ensure reliable performance in
(25°C) 5.5AH 5AH 4.2AH 3.9AH
UPS applications.
Length Width Height Total Height
Dimensions • Sealed non-spillable maintenance free
90mm(3.54inch) 70mm(2.76inch) 101mm(3.98inch) 107mm(4.21inch)
operation.
Approx.
1.65kg(3.63lbs) • Flexible installation in any position.
Weight
• ABS containers and covers (UL94HB,
Internal UL94V0) optional.
Full charged at 25°C: 0.025 Ohm
Resistance
• VRLA Absorbent Glass Mat (AGM) Tech-
Self Discharge 3% of capacity declined per month at (25°C) nology guarantees safe operation without
Capacity 40°C 25°C 0°C -15°C maintenance.
Affected by • Approved for transport by air. D.O.T.,
102% 100% 85% 65%
Temp. (20HR) I.A.T.A. and F.A.A. certified.
Charge Cycle use Float use • High quality and high reliability.
Voltage 14.4-15V(-30mV/°C), • Exceptional deep discharge recovery
13.6-13.8V(-20mV/°C)
(25°C) max. Current: 1.5A performance.
• Low self-discharge characteristics
Battery Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
batteryguy.com (Note)The above characteristics data are average values obtained
within three charge/discharge cycles not the minimum values.
Toll Free: 800-572-1975 Page 1 of 2
BGH-1255F2 (12V 5.5Ah)
Charge characteristic Discharge characteristic (25°C)
Relationship of OCV and state of charge Self-discharge characteristic
AMBIENT TEMPERATURE:
20 TO 25°C
68 TO 77°C
Constant current discharge ratings (Amperes at 77°F 25°C)
F . V / T im e 5 min 10 min 15 min 30 min 1HR 3HR 5HR 10HR 20HR
1.60V 28.4 17.6 13.3 8.12 4.26 1.72 1.05 0.57 0.31
1.67V 26.6 16.7 12.8 7.76 4.21 1.65 1.03 0.57 0.30
1.70V 24.4 16.1 12.5 7.06 4.08 1.54 1.00 0.56 0.29
1.75V 23.9 15.6 12.1 6.71 3.89 1.49 0.98 0.56 0.29
1.80V 21.4 14.9 11.0 6.21 3.64 1.43 0.92 0.55 0.28
1.85V 18.9 14.2 9.9 5.72 3.39 1.38 0.87 0.54 0.27
Constant power discharge ratings (Watts at 77°F 25°C)
F . V / T im e 5 min 10 min 15 min 30 min 1HR 3HR 5HR 10HR 20HR
1.60V 49.8 31.9 24.3 14.6 7.70 3.04 1.77 1.17 0.62
1.67V 48.0 31.1 24.0 14.3 7.65 2.95 1.76 1.17 0.59
1.70V 45.2 30.8 23.8 13.4 7.50 2.82 1.74 1.16 0.59
1.75V 45.5 30.7 23.6 13.0 7.38 2.75 1.73 1.14 0.57
1.80V 41.6 30.2 21.9 12.4 6.95 2.67 1.67 1.13 0.56
1.85V 37.8 28.7 19.8 11.6 6.54 2.59 1.62 1.11 0.54
batteryguy.com Page 2 of 2
Toll Free: 800-572-1975
