The 202 Series regulators are intended for primary pressure
control of non-corrosive, high purity or liquefied gases (up to grade 4.5) in applications where minor fluctuations in outlet pressure due to diminishing inlet supply pressure can be tolerated.
• Single Stage • Chrome-Plated Forged Brass Body • 316L Stainless Steel Diaphragm • Five Port Configuration
Typical Applications Gas supply purging Gas system charging Fuel gas supply control Atomic absorption acetylene 202 1331-580 shown
Features Materials Specifications
CAPSULE® Seat Body Maximum Inlet Pressure Increased serviceability and life Chrome-plated forged brass 3000 PSIG (210 BAR) 316L Stainless Steel Diaphragm Bonnet Temperature Range No inboard diffusion Chrome-plated die-cast zinc -40°F to 140°F (-40°C to 60°C) Forged Body Seat Gauges Durable, long-lasting construction PTFE 2 1/2" (68mm) diameter chrome-plated Field-Adjustable Pressure Limit Filter brass Safeguard downstream equipment 10 micron sintered bronze Ports Large Convoluted Diaphragm Diaphragm 1/4” FPT Smooth pressure changes 316L stainless steel Helium Leak Integrity Standard Relief Valve Internal Seals 1 x 10-8 scc/sec Diaphragm and gauge protection PTFE Cv Chrome-Plated Forged Brass Body 0.2 Economical high purity design See page 193 for flow curves
High Flow Capacity Weight (202 1331-580)
Supply multiple user locations 3.8 lbs. (1.74 kg)
Pressure Ranges 0-15 to 0-200 PSIG
(0-1 to 0-34 BAR) Broad range of applications
CRN OH 5216.5R1
146 CONCOA Research & Specialty Gas CONCOA • 1.800.225.0473 • www.CONCOA.com
200 Series Regulators Installation InstallationInformation Dimensions
Ordering Information 202 A B C D -CON Options Series Outlet Pressure Outlet Inlet Gauge Outlet Assemblies Assembly Gauges Inlet Connections Installed Options 202 Gauge 1: 0-15 PSIG 0-30 PSIG/ 0: None 0: 1/4” FPT port 0: Bare body 000: 1/4” FPT B: Protocol alarm station (0-1 BAR) 0-2 BAR (110/220 VAC) 2: 0-40 PSIG 0-60 PSIG/ 3: 0-4000 PSIG/ 1: 1/4" MPT 1: Standard assembly TF2: 1/8" tube C: Protocol switchover station (0-3 BAR) 0-4 BAR 0-275 BAR (PSIG/kPa gauges) 3: 0-120 PSIG 0-200 PSIG/ 5: 0-1000 PSIG/ 2: 1/4" tube fitting 2: Standard assembly TF4: 1/4" tube H: Protocol switchover (0-8 BAR) 0-14 BAR 0-70 BAR (BAR/PSIG gauges) station with alarm (110/220 VAC) 4: 0-200 PSIG 0-400 PSIG/ 6: 0-400 PSIG/ 3: Diaphragm valve 1/4" tube TF6: 3/8" tube M: Protocol station (0-14 BAR) 0-27 BAR 0-27 BAR fitting
5: 0-15 0-30 PSIG/ 9: 0-600 PSIG/ 4: Diaphragm valve 1/4" MPT M06: 6mm tube Q: Protocol purge station (0-1 BAR)* 0-2 BAR 0-42 BAR *With redline for acetylene use 5: Needle valve 1/4" MPT CGA T: Tee purge DIN 477 6: 1/8" tube fitting BS 341 7: 3/8" tube fitting and others available 8: Diaphragm valve 1/8" tube fitting 9: Diaphragm valve 1/4” FPT A: 3/8” BSP RH fitting B: Diaphragm valve 3/8" tube fitting C: 3/8” BSP LH fitting D: 6mm brass hose barb (Not available if A=4 or 5) G: 1/8” stainless steel tube fitting H: 1/4” stainless steel tube fitting M: 6mm tube fitting S: Diaphragm valve 6mm tube fitting
CONCOA • 1.800.225.0473 • www.CONCOA.com CONCOA Research & Specialty Gas 147
50 220 (3.4) 2000 PSIG {137 BAR) IN (15.2) 2000 PSIG {137 BAR) IN
500 PSIG (34 BAR) IN 1000 PSIG (70 BAR) IN
500 PSIG (34 BAR) IN 200 PSIG (14 BAR) IN 200 200 PSIG {14 BAR) IN
