PC

210

Hydraulic Excavator
PC210/LC/NLC-8

ENGINE POWER
116 kW / 156 HP @ 2.000 rpm
OPERATING WEIGHT
PC210-8: 21.390 - 22.830 kg
PC210LC-8: 21.990 - 23.750 kg
PC210NLC-8: 21.830 - 23.360 kg
BUCKET CAPACITY
max. 1,68 m³
Walk-Around
The Komatsu Dash 8 crawler excavators set new worldwide standards for construction
equipment. Operator safety and comfort is a focal point in their design, and their outstanding
performance and specifications will contribute directly to the success of your business. With
standard auxiliary hydraulic systems and quick-coupler power lines, these machines are
ready to take on any job, whenever and wherever you need it done. Safely rely on Komatsu’s
80 years of experience and commitment to Quality and Durability: your Dash 8 crawler
excavator will quickly become your number one business partner.

Powerful and environmentally friendly

• Low consumption ecot3 engine
• Komatsu integrated hydraulic system
• Eco-gauge and idle caution
• Reduced wastage

Total versatility
• Ideal for a wide range of applications
• 5 working modes
• Wide choice of options
• Built-in versatility

2
 PC210-8
ENGINE POWER
116 kW / 156 HP @ 2.000 rpm
OPERATING WEIGHT
PC210-8: 21.390 - 22.830 kg
PC210LC-8: 21.990 - 23.750 kg
PC210NLC-8: 21.830 - 23.360 kg
Highest safety standards BUCKET CAPACITY
• Safe SpaceCab™ max. 1,68 m³
• Rear view camera
• Optimal jobsite safety
• Safe access, easy maintenance
• Falling Object Protection System (FOPS) optional

First-class operator comfort

• Wide, spacious cab
• Low noise design
• Low vibration levels
• Pressurised cab
• Large, widescreen TFT monitor panel

Komatsu Satellite
Monitoring System

Quality you can rely on

• Reliable and efficient
• Rugged design
• Komatsu-quality components
• Extensive dealer support network

3
Total Versatility
Ideal for a wide range of Built-in versatility
applications To allow the use of many attach-
Powerful and precise, the Komatsu ments, such as buckets, breakers
PC210-8 is equipped to efficiently or demolition tools, a power sup-
carry out any task your business ply for a hydraulic quick coupler
requires. On big sites or small, for with adjustable pressure settings,
digging, trenching, landscaping or and an additional hydraulic cir-
site preparation, the Komatsu origi- cuit controlled by a foot pedal
nal equipment hydraulic system and a sliding joystick push button
always ensures maximum produc- are standard on the PC210-8. A
tivity and control. second optional auxiliary line is
also available for attachments that
require extra hydraulic actuation.
5 working modes
Power, Lifting, Breaker, Attachment,
and Economy. A wide choice of options
The PC210-8 features 5 selecta-
With a choice of different styles
ble working modes that optimise
of boom, arm and undercarriage,
performance and fuel usage. The
you can configure the PC210-8 to
Economy mode can be adjusted
match specific demands for trans-
for an ideal balance between power
port, working envelope or duty.
and economy to match your work.
The excavator can for instance be
The oil flow delivered to hydraulic
equipped with Komatsu’s own
attachments is adjustable directly
Super Long Front end equipment,
on the class-leading wide screen
to let the machine work in other-
monitor panel.
wise inaccessible areas. Extra hy-
draulic arrangements are available
for every boom and arm configura-
tion, making sure that the machine
always contributes strongly to your
business.

4
5
Powerful and Environmentally Friendly
Low consumption ecot3 Komatsu integrated hydraulic Eco-gauge and idle caution
engine system The unique ECO-gauge helps the
The Komatsu SAA6D107E-1 engine The PC210-8 is a highly respon- operator reduce emissions and fuel
provides high torque, a better per- sive and productive machine with consumption for environmentally
formance at low speed and low fuel all major hydraulic parts designed friendly and energy saving opera-
consumption. This ecot3 engine and manufactured by Komatsu. tions. And to further avoid wast-
features a new combustion cham- The electronic Closed Load Sens- ing fuel when the machine is not
ber design with optimised ignition ing hydraulic System (CLSS) offers actually working, a standard-fit idle
and combustion timing. The opera- complete control during individual caution is displayed if the engine
ting pressure of the new common or combined movements - without idles for 5 minutes or more.
rail system was increased for im- sacrificing performance or produc-
proved injection and fuel efficiency. tivity.
The air-to-air charge cooler reduces
the temperature of the compressed
air supplied by the turbo charger to
the cylinders, and further improves
fuel consumption.

Komatsu SAA6D107E-1

Meets EU Stage IIIA

The new Komatsu ecot3 engine
technology reduces NOx and
particle emissions, fuel consump-
tion and noise level. The Komatsu
SAA6D107E-1 engine is certified for
EU Stage IIIA emission regulations.
To further reduce the machine’s
emissions, a Diesel Particulate Filter
is also available.

Eco-gauge

Idle caution

6
Reduced wastage
To avoid spillage of excess grease –
and prolong the life of your machine
– the PC210-8 can be equipped
with an automatic greasing system
that provides precisely the correct
amount of grease when and where
it’s required.

7
First-Class Operator Comfort
Wide spacious cab Low noise design
The newly designed, wide and Komatsu Dash 8 crawler excava-
spacious cab includes a heated tors feature the lowest in-class
air suspension seat with a reclin- external noise levels and are
ing backrest. The seat height and especially well-suited for work in
longitudinal inclination are easily confined spaces or urban areas.
adjusted with a pull-up lever. You Reduced fan speed, a large capac-
can also set the operational posture ity radiator, and the optimal usage
of the armrest and the position of of sound insulation and of sound Automatic air conditioner
the console or recline the seat all absorbing materials help to make
the way and place it into a fully flat noise levels inside Dash 8 excava-
state with the headrest attached. tors comparable to those inside an
executive car.

Pressurised cab
An automatic air conditioner, an air Cab damper mounting
filter and a positive internal air pres- The built-in stability of the Komatsu
sure (60 Pa) combine to prevent PC210-8, combined with a highly
external dust from entering the cab. rigid deck and a sprung multi-layer
viscous mount system, drastically Hot and cool box
reduces vibration levels for the
operator.

Joysticks with proportional control button for

attachments

8
Large, widescreen TFT
monitor
To enable safe, accurate and
smooth work, the user friendly
monitor is the highly intuitive user
interface for the machine’s Equip-
ment Management and Monitoring
System (EMMS). Multilingual and
with all essential information avail-
able at a glance, it features simple
and easy to operate switches and
multifunction keys that provide the
operator with fingertip access to a
wide range of functions and opera-
ting information.

9
Highest Safety Standards
Safe SpaceCab™ Optimal job site safety
Specifically designed for Komatsu Safety features on the Komatsu
excavators, the Dash 8 cab has a PC210-8 comply with the latest
tubular steel frame. It provides very industry standards and work
high shock absorbency, impact together as a system to minimise
resistance and durability. The seat risks to personnel in and around the
belt is designed to keep the opera- machine. An audible travel alarm
tor in the safety zone of the cab further promotes job site safety.
in the event of a roll-over. At your Very durable anti-slip plates – with
request, the Komatsu PC210-8 can additional high friction covering –
also be fitted with an ISO 10262 maintain long term traction perfor-
Level 2 Falling Object Protective mance.
System (FOPS).

Rear view camera

A standard fitment camera gives
Safe and easy maintenance
an exceptionally clear view of the
Thermal guards are placed around
rear work zone on the wide-screen
high temperature parts of the
monitor panel. Large mirrors on
engine. The fan belt and pulleys
both sides ensure that machine vis-
are well protected and in case of
ibility meets the latest ISO stand-
damage, fire risk is reduced by a
ards.
pump/engine partition that prevents
hydraulic oil from spraying onto the
engine.

Rear view camera

Safe SpaceCab™ Anti-slip plates

10
11
Quality You Can Rely On
Reliable and efficient Komatsu-quality components
Productivity is the key to suc- With the latest computer design
cess – all major components of the techniques and a thorough test pro-
PC210-8 are designed and directly gramme, Komatsu’s global know-
manufactured by Komatsu. Essen- how produces machines that are
tial machine functions are perfectly designed, manufactured and tested
matched for a highly reliable and to meet your highest standards.
productive machine.

Rugged design Extensive dealer support

Maximum toughness and durabil- network
ity – along with top class customer The extensive Komatsu distribution
service – are the cornerstones of and dealer network is standing by
Komatsu’s philosophy. Single piece to help keep your fleet in optimum
plates and castings are used in condition. Customised servic-
key areas of the machine’s struc- ing packages are available, with
ture for good load distribution. express availability of spare parts,
Highly durable rubbing strips on the to make sure that your Komatsu will
underside of the arm protect the continue to perform at its peak.
structure from material falling from
the bucket.

Cast boom foot Single piece boom plates

12
13
Komatsu Satellite Monitoring System
KOMTRAX™ can assist you with: For further details on KOMTRAX™,
please ask your Komatsu dealer for
Full machine monitoring the latest KOMTRAX™ brochure.
KOMTRAX™ is a revolutionary Get detailed operation data to know
machine tracking system designed when your machines are used and
to save you time and money. You how productive they are.
can now monitor your equipment
anytime and anywhere. Use valu- Total Fleet Management
able machine data received via the Keep track of the location of your
KOMTRAX™ web site to optimise machines at all times and discour-
your maintenance planning and age unapproved usage or theft.
machine performances.
Complete machine status
Receive warnings, alerts and cau-
tions, via a web site or by e-mail,
to help with maintenance planning
and for longer machine life.

14
 KOMTRAX™

Machine working time - With the “daily work- Maintenance planning - To increase produc- Fleet location - The machine list instantly
ing record” chart, get precise engine running tivity and improve maintenance planning, locates all your machines, even those in
time data: when your machine was started alerts indicate when items such as filters or other countries.
and when it was shut down, as well as total oil must be replaced.
engine running time.

Machine tracking during transport - When Alarm notifications - You can receive notifi- Added security - The “engine lock” feature
your machine is transported, KOMTRAX™ cation of alarms both via the KOMTRAX™ allows to program when a machine’s engine
sends travel messages to the web site or website and by e-mail. can be started. And with “geo-fence”,
by e-mail to inform you of its progress, and KOMTRAX™ sends notification every time
confirms when it reaches its destination. your machine moves in or out of a predeter-
mined operating area.

15
Easy Maintenance
Side-by-side cooling Easy access to the engine oil Gas-assisted engine hood
Since the radiator, aftercooler and filter and fuel drain valve damper cylinders
oil cooler are arranged in parallel, it The engine oil filter and fuel drain The engine hood can be easily
is easy to clean, remove and install valve are mounted remotely to im- opened and closed with help of the
them. prove accessibility. gas-assisted engine hood damper
cylinders.

Water Washable floor Long-life oil filters

separator The floor is easy to keep clean. The hydraulic oil filter uses high-
This is stand- The gently inclined surface has performance filtering material for
ard equipment a flanged floormat and drainage long element
which removes holes to facilitate runoff. replacement
any water that intervals, which
has become significantly
Inclined track frame
mixed with the reduces mainte-
The track frame is sloped so that
fuel, preventing fuel system dam- nance costs.
dirt will not accumulate and can be
age.
removed easily.

Flexible warranty
When you purchase Komatsu
equipment, you gain access to a
broad range of programmes and
services that have been designed
to help you get the most from
your investment. For example,
Komatsu’s Flexible Warranty
Programme provides a range of
extended warranty options on
the machine and its components.
These can be chosen to meet your
individual needs and activities. This
programme is designed to help
reduce total operating costs.

16
 Specifications
ENGINE SWING SYSTEM

Model........................................................... Komatsu SAA6D107E-1 Type...............................................Axial piston motor driving through

Type................................Common rail direct injection, water-cooled, planetary double reduction gearbox
emissionised, turbocharged, after-cooled diesel Swing lock...................................Electrically actuated wet multi-disc
Engine power brake integrated into swing motor
  at rated engine speed..................................................... 2.000 rpm Swing speed.................................................................... 0 - 12,4 rpm
  ISO 14396.............................................................116 kW / 156 HP Swing torque.......................................................................... 68 kNm
  ISO 9249 (net engine power)................................110 kW / 148 HP Max. pressure..........................................................................295 bar
No. of cylinders.................................................................................6
Bore × stroke................................................................107 × 124 mm
Displacement............................................................................6,69 ltr DRIVES AND BRAKES
Battery....................................................................... 2 × 12 V/140 Ah
Alternator............................................................................. 24 V/60 A Steering control.........................................2 levers with pedals giving
Starter motor................................................................... 24 V/5,5 kW full independent control of each track
Air filter type............................................... Double element type with Drive method.................................................................... Hydrostatic
monitor panel dust indicator and auto dust evacuator Travel operation.....................................Automatic 3-speed selection
Cooling................... Suction type cooling fan with radiator fly screen Gradeability..........................................................................70%, 35°
Max. travel speeds
  Lo / Mi / Hi........................................................ 3,0 / 4,1 / 5,5 km/h
HYDRAULIC SYSTEM Maximum drawbar pull........................................................ 18.200 kg
Brake system......................................... Hydraulically operated discs
Type...............HydrauMind. Closed-centre system with load sensing in each travel motor
and pressure compensation valves
Additional circuits.....................Depending on the specification up to
2 additional circuits can be installed SERVICE REFILL CAPACITIES
Main pump.............................2 variable displacement piston pumps
supplying boom, arm, bucket, swing and travel circuits Fuel tank.................................................................................325,0 ltr
Maximum pump flow................................................... 2 × 219 ltr/min Radiator....................................................................................20,4 ltr
Relief valve settings Engine oil..................................................................................23,1 ltr
 Implement............................................................................380 bar Swing drive.................................................................................6,6 ltr
 Travel....................................................................................380 bar Hydraulic tank........................................................................137,0 ltr
 Swing...................................................................................295 bar Final drive (each side).................................................................3,3 ltr
  Pilot circuit.............................................................................33 bar

ENVIRONMENT
UNDERCARRIAGE
Engine emissions........................... Fully complies with EU Stage IIIA
Construction................................................... X-frame centre section exhaust emission regulations
with box section track frames Noise levels
Track assembly   LwA external.................................102 dB(A) (2000/14/EC Stage II)
 Type..............................................................................Fully sealed   LpA operator ear.........................69 dB(A) (ISO 6396 dynamic test)
  Shoes (each side)......................... 45 (PC210), 49 (PC210LC/NLC) Vibration levels (EN 12096:1997)
 Tension....................................Combined spring and hydraulic unit  Hand/arm............................. ≤ 2,5 m/s² (uncertainty K = 0,49 m/s²)
Rollers  Body.................................... ≤ 0,5 m/s² (uncertainty K = 0,24 m/s²)
  Track rollers (each side).................... 7 (PC210), 9 (PC210LC/NLC) Contains fluorinated greenhouse gas HFC-134a (GWP 1430).
  Carrier rollers (each side)...............................................................2 Quantity of gas 0,9 kg, CO2 equivalent 1,29 t

OPERATING WEIGHT (APPR.)

MONO BOOM TWO-PIECE BOOM
PC210-8 PC210LC-8 PC210NLC-8 PC210-8 PC210LC-8 PC210NLC-8

Triple grouser Operating Ground Operating Ground Operating Ground Operating Ground Operating Ground Operating Ground
shoes weight pressure weight pressure weight pressure weight pressure weight pressure weight pressure

500 mm – – – – 21.830 kg 0,55 kg/cm² 22.730 kg 0,57 kg/cm²

600 mm 21.390 kg 0,50 kg/cm² 21.990 kg 0,46 kg/cm² 22.190 kg 0,47 kg/cm² 22.290 kg 0,52 kg/cm² 22.890 kg 0,48 kg/cm² 23.090 kg 0,48 kg/cm²
700 mm 21.640 kg 0,43 kg/cm² 22.260 kg 0,40 kg/cm² 22.460 kg 0,40 kg/cm² 22.540 kg 0,45 kg/cm² 23.160 kg 0,42 kg/cm² 23.360 kg 0,42 kg/cm²
800 mm 21.930 kg 0,38 kg/cm² 22.580 kg 0,36 kg/cm² – – 22.830 kg 0,40 kg/cm² 23.480 kg 0,37 kg/cm²
900 mm – – 22.850 kg 0,32 kg/cm² – – 23.750 kg 0,33 kg/cm²
Operating weight, including 2,9 m arm, 900 kg bucket, operator, lubricant, coolant, full fuel tank
and the standard equipment.
17
Dimensions & Performance Figures
MACHINE DIMENSIONS PC210-8 PC210LC-8 PC210NLC-8
A Overall width of upper structure 2.500 mm 2.500 mm 2.500 mm
B Overall height of cab 3.035 mm 3.035 mm 3.035 mm
C Overall length of basic machine 4.810 mm 4.995 mm 4.995 mm
D Tail length 2.770 mm 2.770 mm 2.770 mm
Tail swing radius 2.800 mm 2.800 mm 2.800 mm
E Clearance under counterweight 1.100 mm 1.100 mm 1.100 mm
F Machine tail height 2.110 mm 2.110 mm 2.110 mm
G Ground clearance 440 mm 440 mm 440 mm
H Tumbler centre distance 3.275 mm 3.655 mm 3.655 mm
I Track length 4.080 mm 4.450 mm 4.450 mm
J Track gauge 2.200 mm 2.380 mm 2.040 mm
K Track shoe width 500, 600, 700, 800 mm 600, 700, 800, 900 mm 500, 600, 700 mm
L Overall track width with 500 mm shoe – – 2.540 mm
Overall track width with 600 mm shoe 2.800 mm 2.980 mm 2.640 mm
Overall track width with 700 mm shoe 2.900 mm 3.080 mm 2.740 mm
Overall track width with 800 mm shoe 3.000 mm 3.180 mm –
Overall track width with 900 mm shoe – 3.280 mm –

MONO BOOM

TWO-PIECE BOOM

TRANSPORT DIMENSIONS MONO BOOM TWO-PIECE BOOM

Arm length 1,8 m 2,4 m 2,9 m 1,8 m 2,4 m 2,9 m
M Transport length 9.540 mm 9.555 mm 9.485 mm 9.515 mm 9.420 mm 9.395 mm
N Length on ground (transport) PC210 6.270 mm 5.700 mm 4.815 mm 6.390 mm 5.970 mm 5.185 mm
Length on ground (transport) PC210LC/NLC 6.455 mm 5.885 mm 5.000 mm 6.580 mm 6.160 mm 5.375 mm
O Overall height (to top of boom) 2.985 mm 3.190 mm 2.970 mm 2.865 mm 3.090 mm 3.030 mm

18
 PC210-8 / MAX. BUCKET CAPACITY AND WEIGHT
MONO BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,56 m³ 1.100 kg 1,38 m³ 1.025 kg 1,27 m³ 950 kg
Material weight up to 1,5 t/m³ 1,33 m³ 1.000 kg 1,18 m³ 925 kg 1,08 m³ 875 kg
Material weight up to 1,8 t/m³ 1,15 m³ 900 kg 1,00 m³ 850 kg 0,94 m³ 800 kg

TWO-PIECE BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,47 m³ 1.075 kg 1,30 m³ 975 kg 1,18 m³ 925 kg
Material weight up to 1,5 t/m³ 1,25 m³ 950 kg 1,10 m³ 875 kg 1,00 m³ 825 kg
Material weight up to 1,8 t/m³ 1,09 m³ 875 kg 0,96 m³ 800 kg 0,87 m³ 750 kg

PC210LC-8 / MAX. BUCKET CAPACITY AND WEIGHT

MONO BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,68 m³ 1.200 kg 1,62 m³ 1.150 kg 1,47 m³ 1.075 kg
Material weight up to 1,5 t/m³ 1,50 m³ 1.075 kg 1,38 m³ 1.025 kg 1,25 m³ 950 kg
Material weight up to 1,8 t/m³ 1,30 m³ 975 kg 1,20 m³ 925 kg 1,09 m³ 875 kg

TWO-PIECE BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,68 m³ 1.200 kg 1,50 m³ 1.075 kg 1,38 m³ 1.025 kg
Material weight up to 1,5 t/m³ 1,45 m³ 1.050 kg 1,28 m³ 975 kg 1,18 m³ 925 kg
Material weight up to 1,8 t/m³ 1,26 m³ 950 kg 1,11 m³ 875 kg 1,02 m³ 850 kg

PC210NLC-8 / MAX. BUCKET CAPACITY AND WEIGHT

MONO BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,53 m³ 1.100 kg 1,38 m³ 1.025 kg 1,24 m³ 950 kg
Material weight up to 1,5 t/m³ 1,30 m³ 975 kg 1,18 m³ 925 kg 1,05 m³ 850 kg
Material weight up to 1,8 t/m³ 1,13 m³ 900 kg 1,00 m³ 850 kg 0,91 m³ 775 kg

TWO-PIECE BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,44 m³ 1.050 kg 1,27 m³ 950 kg 1,15 m³ 900 kg
Material weight up to 1,5 t/m³ 1,23 m³ 950 kg 1,08 m³ 875 kg 0,98 m³ 825 kg
Material weight up to 1,8 t/m³ 1,07 m³ 850 kg 0,94 m³ 800 kg 0,85 m³ 750 kg

Max. capacity and weight have been calculated according to ISO 10567:2007.
Please consult with your distributor for the correct selection of buckets and attachments to suit the application.

BUCKET AND ARM FORCE

Arm length 1,8 m 2,4 m 2,9 m
Bucket digging force 16.500 kg 16.500 kg 14.100 kg
Bucket digging force at PowerMax 17.500 kg 17.500 kg 15.200 kg
Arm crowd force 13.800 kg 12.200 kg 10.300 kg
Arm crowd force at PowerMax 14.800 kg 13.000 kg 11.000 kg

19
Working Range
MONO BOOM

ARM LENGTH 1,8 m 2,4 m 2,9 m

A Max. digging height 9.500 mm 9.800 mm 10.000 mm
B Max. dumping height 6.630 mm 6.890 mm 7.110 mm
C Max. digging depth 5.380 mm 6.095 mm 6.620 mm
D Max. vertical wall digging depth 4.630 mm 5.430 mm 5.980 mm
E Max. digging depth of cut for 2,44 m level 5.130 mm 5.780 mm 6.370 mm
F Max. digging reach 8.850 mm 9.380 mm 9.875 mm
G Max. digging reach at ground level 8.660 mm 9.190 mm 9.700 mm
H Min. swing radius 3.010 mm 3.090 mm 3.040 mm

20
TWO-PIECE BOOM H
(m)
12

11

10

6
A 5

B 4

1
0 G.L.

-1

-2
D -3
C E
-4

-5

-6

-7 (m)
11 10 9 8 7 6 5 4 3 2 1 0
2.440 mm

G
F

ARM LENGTH 1,8 m 2,4 m 2,9 m

A Max. digging height 10.260 mm 10.660 mm 11.060 mm
B Max. dumping height 7.295 mm 7.695 mm 8.090 mm
C Max. digging depth 5.120 mm 5.700 mm 6.210 mm
D Max. vertical wall digging depth 4.040 mm 4.745 mm 5.250 mm
E Max. digging depth of cut for 2,44 m level 5.000 mm 5.590 mm 6.105 mm
F Max. digging reach 8.900 mm 9.440 mm 9.935 mm
G Max. digging reach at ground level 8.695 mm 9.250 mm 9.750 mm
H Min. swing radius 3.105 mm 2.890 mm 2.640 mm

21
Lifting Capacity
PC210-8 MONO BOOM
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length

7,5 m kg *2.800 *2.800 *4.150 *4.150

6,0 m kg *2.650 2.600 *3.450 2.800 *4.250 *4.250
4,5 m kg *2.650 2.150 4.150 2.750 *4.850 4.150 *5.400 *5.400
3,0 m kg *2.750 1.950 4.000 2.600 *5.800 3.900 *7.350 6.200 *11.450 *11.450
2,9 m 1,5 m kg 2.950 1.850 3.850 2.500 5.550 3.600 8.900 5.600 *6.350 *6.350
0,0 m kg 3.000 1.850 3.700 2.350 5.300 3.400 8.450 5.200 *7.200 *7.200
760 kg -1,5 m kg 3.250 2.050 3.650 2.300 5.200 3.250 8.250 5.050 *10.450 9.800 *6.300 *6.300
-3,0 m kg 3.900 2.450 5.200 3.250 8.300 5.100 *15.250 10.000 *10.050 *10.050
A – Reach from swing center
-4,5 m kg 5.400 3.450 8.550 5.300 *12.950 10.450
B – Bucket hook height
7,5 m kg *4.150 *4.150
6,0 m kg *3.950 3.000 *4.750 4.200 C – Lifting capacities, including
bucket (760 kg), bucket
4,5 m kg 3.750 2.450 4.050 2.650 *5.350 4.050 *6.200 *6.200 linkage (200 kg) and bucket
3,0 m kg 3.400 2.200 3.950 2.550 5.800 3.800 *8.050 6.000 cylinder (140 kg)
2,4 m 1,5 m kg 3.250 2.050 3.800 2.450 5.500 3.550 8.700 5.450
0,0 m kg 3.350 2.100 3.700 2.350 5.300 3.350 8.350 5.150 *6.750 *6.750
760 kg -1,5 m kg 3.700 2.350 3.700 2.350 5.200 3.300 8.300 5.100 *11.600 9.900 *7.300 *7.300 – Rating over front

-3,0 m kg 4.550 2.900 5.250 3.350 8.400 5.150 *14.500 10.200 *12.150 *12.150 – Rating over side
-4,5 m kg *6.800 4.450 *8.100 5.450 *11.500 10.700
– Rating at maximum reach
7,5 m kg *4.950 *4.950
6,0 m kg *4.550 3.450 *5.450 4.150 *5.750 *5.750
4,5 m kg 4.200 2.750 *5.900 4.000 *7.100 6.450 *10.050 *10.050 When removing bucket, linkage
or cylinder, lifting capacities can
3,0 m kg 3.750 2.450 3.950 2.550 5.700 3.750 *8.900 5.800 be increased by their respective
1,8 m 1,5 m kg 3.600 2.350 3.850 2.450 5.450 3.500 8.550 5.300 weights.
0,0 m kg 3.750 2.400 3.800 2.400 5.300 3.350 8.350 5.150 With 600 mm shoes
760 kg -1,5 m kg 4.200 2.700 5.300 3.350 8.350 5.150 *12.100 10.100
-3,0 m kg 5.400 3.500 5.450 3.500 8.550 5.300 *13.150 10.400
-4,5 m kg

PC210-8 TWO-PIECE BOOM

7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length

7,5 m kg
6,0 m kg *2.450 2.450 *3.700 2.700 *5.150 4.300
4,5 m kg *2.400 2.000 4.000 2.650 *5.450 4.100 *6.750 *6.750
3,0 m kg *2.450 1.800 3.900 2.500 5.750 3.800 *9.050 6.150
2,9 m 1,5 m kg *2.650 1.700 3.800 2.350 5.500 3.450 8.800 5.400
0,0 m kg *2.850 1.700 3.650 2.250 5.200 3.200 8.300 4.950 *5.900 *5.900
760 kg -1,5 m kg 3.150 1.900 3.600 2.200 5.050 3.100 8.100 4.800 *8.750 *8.750
-3,0 m kg 3.750 2.300 5.100 3.100 *8.000 4.850 *8.750 *8.750
A – Reach from swing center
-4,5 m kg
B – Bucket hook height
7,5 m kg
6,0 m kg *3.950 2.800 *5.450 4.200 *6.900 6.900 C – Lifting capacities, including
bucket (760 kg), bucket
4,5 m kg 3.550 2.250 4.000 2.600 *5.800 4.000 *7.900 6.600 *9.550 *9.550 linkage (200 kg) and bucket
3,0 m kg 3.200 2.000 3.900 2.450 5.650 3.700 9.200 5.900 cylinder (140 kg)
2,4 m 1,5 m kg 3.100 1.900 3.750 2.350 5.400 3.400 8.600 5.250
0,0 m kg 3.200 1.950 3.650 2.250 5.150 3.200 8.200 4.900
760 kg -1,5 m kg 3.500 2.150 3.600 2.200 5.100 3.100 8.100 4.850 *9.350 *9.350 – Rating over front
-3,0 m kg *3.850 2.700 *5.150 3.200 *7.100 4.950
– Rating over side
-4,5 m kg
– Rating at maximum reach
7,5 m kg
6,0 m kg *4.300 3.300 *5.900 4.050 *7.600 6.900
4,5 m kg 4.050 2.600 5.850 3.900 *8.800 6.400 *10.500 *10.500 When removing bucket, linkage
or cylinder, lifting capacities can
3,0 m kg 3.650 2.300 3.850 2.450 5.600 3.650 9.100 5.700
be increased by their respective
1,8 m 1,5 m kg 3.500 2.200 3.750 2.350 5.400 3.400 8.450 5.100 weights.
0,0 m kg 3.650 2.250 3.700 2.300 5.200 3.200 8.200 4.900 With 600 mm shoes
760 kg -1,5 m kg 4.100 2.550 5.200 3.200 8.200 4.950
-3,0 m kg
-4,5 m kg

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
22
PC210LC-8 MONO BOOM
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length

7,5 m kg *2.800 *2.800 *4.150 *4.150

6,0 m kg *2.650 *2.650 *3.450 3.200 *4.250 *4.250
4,5 m kg *2.650 2.500 *4.550 3.150 *4.850 4.750 *5.400 *5.400
3,0 m kg *2.750 2.250 4.900 3.050 *5.800 4.450 *7.350 7.100 *11.450 *11.450
2,9 m 1,5 m kg *3.000 2.200 4.750 2.900 *6.750 4.150 *9.250 6.450 *6.350 *6.350
0,0 m kg *3.400 2.200 4.600 2.750 6.600 3.950 *10.450 6.050 *7.200 *7.200
760 kg -1,5 m kg 4.050 2.400 4.550 2.700 6.450 3.800 10.450 5.900 *10.450 *10.450 *6.300 *6.300
-3,0 m kg 4.800 2.900 6.450 3.850 *10.450 5.950 *15.250 11.900 *10.050 *10.050
A – Reach from swing center
-4,5 m kg *6.300 4.000 *9.000 6.150 *12.950 12.350
B – Bucket hook height
7,5 m kg *4.150 *4.150
6,0 m kg *3.950 3.450 *4.750 *4.750 C – Lifting capacities, including
bucket (760 kg), bucket
4,5 m kg *3.950 2.850 4.950 3.100 *5.350 4.650 *6.200 *6.200 linkage (200 kg) and bucket
3,0 m kg 4.150 2.550 4.850 3.000 *6.200 4.350 *8.050 6.900 cylinder (140 kg)
2,4 m 1,5 m kg 4.050 2.450 4.700 2.850 6.750 4.100 *9.800 6.350
0,0 m kg 4.150 2.500 4.600 2.750 6.550 3.900 10.550 6.000 *6.750 *6.750
760 kg -1,5 m kg 4.600 2.750 4.600 2.750 6.450 3.850 10.500 5.950 *11.600 *11.600 *7.300 *7.300 – Rating over front

-3,0 m kg 5.650 3.400 6.550 3.900 *10.150 6.050 *14.500 12.100 *12.150 *12.150 – Rating over side
-4,5 m kg *6.800 5.150 *8.100 6.300 *11.500 *11.500
– Rating at maximum reach
7,5 m kg *4.950 *4.950
6,0 m kg *4.550 3.950 *5.450 4.700 *5.750 *5.750
4,5 m kg *4.550 3.200 *5.900 4.550 *7.100 *7.100 *10.050 *10.050 When removing bucket, linkage
or cylinder, lifting capacities can
3,0 m kg 4.600 2.850 4.800 3.000 *6.700 4.300 *8.900 6.700 be increased by their respective
1,8 m 1,5 m kg 4.450 2.700 4.700 2.900 6.750 4.100 *10.400 6.200 weights.
0,0 m kg 4.600 2.800 4.650 2.850 6.550 3.900 10.550 6.000 With 600 mm shoes
760 kg -1,5 m kg 5.200 3.150 6.550 3.900 10.550 6.000 *12.100 11.950
-3,0 m kg 6.650 4.050 6.700 4.050 *9.600 6.200 *13.150 12.300
-4,5 m kg

PC210LC-8 TWO-PIECE BOOM

7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length

7,5 m kg
6,0 m kg *2.450 *2.450 *3.700 3.150 *5.150 4.900
4,5 m kg *2.400 2.350 *4.300 3.100 *5.450 4.700 *6.750 *6.750
3,0 m kg *2.450 2.100 *4.550 2.950 *6.100 4.400 *9.050 7.050
2,9 m 1,5 m kg *2.650 2.050 4.700 2.800 6.800 4.050 *10.400 6.300
0,0 m kg *2.950 2.050 4.550 2.650 6.500 3.800 *9.900 5.850 *5.900 *5.900
760 kg -1,5 m kg *3.500 2.250 4.500 2.600 6.350 3.650 *9.800 5.700 *8.750 *8.750
-3,0 m kg *3.780 2.750 *5.900 3.700 *8.000 5.750 *8.750 *8.750
A – Reach from swing center
-4,5 m kg
B – Bucket hook height
7,5 m kg
6,0 m kg *3.950 3.250 *5.450 4.750 *6.900 *6.900 C – Lifting capacities, including
bucket (760 kg), bucket
4,5 m kg *3.900 2.650 4.900 3.000 *5.800 4.600 *7.900 7.500 *9.550 *9.550 linkage (200 kg) and bucket
3,0 m kg 4.000 2.350 4.800 2.900 *6.450 4.300 *9.650 6.800 cylinder (140 kg)
2,4 m 1,5 m kg 3.850 2.250 4.650 2.750 6.700 3.950 *10.600 6.150
0,0 m kg 3.950 2.300 4.550 2.650 6.450 3.750 *10.400 5.800
760 kg -1,5 m kg 4.400 2.550 4.500 2.650 6.350 3.700 *9.250 5.700 *9.350 *9.350 – Rating over front
-3,0 m kg *3.850 3.200 *5.150 3.750 *7.100 5.850
– Rating over side
-4,5 m kg
– Rating at maximum reach
7,5 m kg
6,0 m kg *4.300 3.800 *5.900 4.650 *7.600 7.850
4,5 m kg *4.200 3.050 *6.250 4.500 *8.800 7.350 *10.500 *10.500 When removing bucket, linkage
or cylinder, lifting capacities can
3,0 m kg *4.300 2.700 4.750 2.850 6.900 4.200 *10.350 6.600
be increased by their respective
1,8 m 1,5 m kg 4.350 2.600 4.650 2.750 6.650 3.950 10.700 6.000 weights.
0,0 m kg 4.500 2.650 4.600 2.700 6.500 3.800 *10.050 5.800 With 600 mm shoes
760 kg -1,5 m kg *4.750 3.000 *6.450 3.800 *8.500 5.800
-3,0 m kg
-4,5 m kg

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
23
Lifting Capacity
PC210NLC-8 MONO BOOM
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length

7,5 m kg *2.800 *2.800 *4.150 *4.150

6,0 m kg *2.650 2.550 *3.450 2.750 *4.250 *4.250
4,5 m kg *2.650 2.150 *4.550 2.700 *4.850 4.100 *5.400 *5.400
3,0 m kg *2.750 1.900 4.950 2.600 *5.800 3.800 *7.350 6.050 *11.450 *11.450
2,9 m 1,5 m kg *3.000 1.800 4.800 2.450 *6.750 3.550 *9.250 5.350 *6.350 *6.350
0,0 m kg *3.400 1.850 4.650 2.350 6.650 3.300 *10.450 5.100 *7.200 *7.200
760 kg -1,5 m kg 4.100 2.000 4.600 2.300 6.500 3.150 10.600 4.800 *10.450 8.800 *6.300 *6.300
-3,0 m kg 4.850 2.400 6.550 3.200 *10.450 4.950 *15.250 9.600 *10.050 *10.050
A – Reach from swing center
-4,5 m kg *6.300 3.400 *9.000 5.150 *12.950 10.000
B – Bucket hook height
7,5 m kg *4.150 4.150
6,0 m kg *3.950 2.950 *4.750 4.150 C – Lifting capacities, including
bucket (760 kg), bucket
4,5 m kg *3.950 2.450 *4.950 2.650 *5.350 4.000 *6.200 *6.200 linkage (200 kg) and bucket
3,0 m kg *4.200 2.150 4.900 2.550 *6.200 3.750 *8.050 5.850 cylinder (140 kg)
2,4 m 1,5 m kg 4.100 2.050 4.750 2.400 6.850 3.500 *9.800 5.200
0,0 m kg 4.200 2.100 4.650 2.350 6.650 3.300 10.700 5.050 *6.750 *6.750
760 kg -1,5 m kg 4.650 2.300 4.650 2.300 6.550 3.200 10.600 4.800 *11.600 8.900 *7.300 *7.300 – Rating over front
-3,0 m kg 5.700 2.850 6.600 3.300 *10.150 5.050 *14.500 9.750 *12.150 *12.150
– Rating over side
-4,5 m kg *6.800 4.350 *8.100 5.300 *11.500 10.250
– Rating at maximum reach
7,5 m kg *4.950 *4.950
6,0 m kg *4.550 3.400 *5.450 4.050 *5.750 *5.750
4,5 m kg *4.550 2.750 *5.900 3.950 *7.100 6.300 *10.050 *10.050 When removing bucket, linkage
or cylinder, lifting capacities can
3,0 m kg 4.650 2.400 4.850 2.550 *6.700 3.700 *8.900 5.700
be increased by their respective
1,8 m 1,5 m kg 4.500 2.300 4.750 2.450 6.800 3.450 *10.400 5.100 weights.
0,0 m kg 4.700 2.350 4.700 2.400 6.600 3.300 10.650 5.000 With 500 mm shoes
760 kg -1,5 m kg 5.250 2.650 6.600 3.250 10.650 4.850 *12.100 9.050
-3,0 m kg 6.750 3.400 6.800 3.450 *9.600 5.200 *13.150 10.000
-4,5 m kg

PC210NLC-8 TWO-PIECE BOOM

7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length

7,5 m kg
6,0 m kg *2.450 2.400 *3.700 2.650 *5.150 4.250
4,5 m kg *2.400 2.000 *4.300 2.600 *5.450 4.050 *6.750 6.700
3,0 m kg *2.450 1.750 *4.550 2.500 *6.100 3.750 *9.050 5.950
2,9 m 1,5 m kg *2.650 1.650 4.750 2.300 6.850 3.400 *10.400 5.250
0,0 m kg *2.950 1.700 4.600 2.200 6.550 3.150 *9.900 4.850 *5.900 *5.900
760 kg -1,5 m kg *3.500 1.850 4.550 2.150 6.450 3.050 *9.800 4.700 *8.750 *8.750
-3,0 m kg *3.800 2.250 *5.900 3.050 *8.000 4.750 *8.750 *8.750
A – Reach from swing center
-4,5 m kg
B – Bucket hook height
7,5 m kg
6,0 m kg *3.950 2.750 *5.450 4.100 *6.900 6.700 C – Lifting capacities, including
bucket (760 kg), bucket
4,5 m kg *3.900 2.200 4.950 2.550 *5.800 3.900 *7.900 6.450 *9.550 *9.550 linkage (200 kg) and bucket
3,0 m kg *4.000 1.950 4.850 2.450 *6.450 3.650 *9.650 7.550 cylinder (140 kg)
2,4 m 1,5 m kg 3.900 1.850 4.700 2.300 6.750 3.350 *10.600 5.100
0,0 m kg 4.000 1.900 4.600 2.200 6.550 3.100 *10.400 4.750
760 kg -1,5 m kg 4.450 2.100 4.550 2.200 6.450 3.050 *9.250 4.750 *9.350 9.050 – Rating over front

-3,0 m kg *3.850 2.650 *5.150 3.150 *7.100 4.800 – Rating over side
-4,5 m kg
– Rating at maximum reach
7,5 m kg
6,0 m kg *4.300 3.250 *5.900 4.000 *7.600 6.750
4,5 m kg *4.200 2.550 *6.250 3.850 *8.800 6.250 *10.500 *10.500 When removing bucket, linkage
or cylinder, lifting capacities can
3,0 m kg *4.300 2.250 4.800 2.400 *6.900 3.600 *10.350 5.550 be increased by their respective
1,8 m 1,5 m kg 4.400 2.150 4.700 2.300 6.750 3.300 *10.750 5.000 weights.
0,0 m kg 4.550 2.200 4.650 2.250 6.550 3.150 *10.050 4.750 With 500 mm shoes
760 kg -1,5 m kg *4.750 2.500 *6.450 3.150 *8.500 4.800
-3,0 m kg
-4,5 m kg

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
24
 Super Long Front Specification
WORK EQUIPMENT

b
Boom
  Length (a).........................................................................8.795 mm
  Height (b).........................................................................1.555 mm
 Weight................................................................................ 2.200 kg
a
Arm
  Length (c).........................................................................7.375 mm
  Height (d).........................................................................1.000 mm

d
 Weight................................................................................ 1.350 kg

M
TRANSPORT DIMENSIONS
M Transport length 12.435 mm
N Length on ground (transport) 4.725 mm
O
O Overall height (to top of boom) 3.390 mm

MAX. BUCKET CAPACITY AND WEIGHT

PC210LC-8 PC210NLC-8
General purpose bucket
Max. bucket width 955 mm
Material weight up to 1,2 t/m³ 0,66 m³ 525 kg 0,48 m³ 425 kg
Material weight up to 1,5 t/m³ 0,56 m³ 475 kg 0,41 m³ 400 kg
Material weight up to 1,8 t/m³ 0,49 m³ 425 kg 0,36 m³ 375 kg

Ditch cleaning bucket

Max. bucket width 2.100 mm
Material weight up to 1,2 t/m³ * 1.300 kg * 1.000 kg
Material weight up to 1,5 t/m³ * 1.300 kg * 1.000 kg
Material weight up to 1,8 t/m³ – –
* Maximum load at end of arm (bucket + payload).

Max. capacity and weight have been calculated according to ISO 10567:2007.
Please consult with your distributor for the correct selection of buckets and attachments to suit the application.

OPERATING WEIGHT (APPR.)

PC210LC-8 PC210NLC-8
Triple grouser shoes Operating weight Ground pressure Operating weight Ground pressure
500 mm – – 24.010 kg 0,60 kg/cm²
600 mm 24.170 kg 0,51 kg/cm² 24.370 kg 0,52 kg/cm²
700 mm 24.530 kg 0,44 kg/cm² 24.730 kg 0,44 kg/cm²
800 mm 24.890 kg 0,39 kg/cm² – –
900 mm 25.250 kg 0,36 kg/cm² – –

Operating weight, including Super Long Front work equipment, bucket, operator, lubricant, coolant, full fuel tank and the standard equipment.

25
Super Long Front Specification
Working range PC210LC/NLC-8 Super Long Front

F
14 m

13 m

12 m

11 m

10 m

9m

8m
A

7m
B

6m

5m

4m

3m

2m

1m

-0 m

-1 m

-2 m

-3 m

-4 m

-5 m
C

-6 m

-7 m

-8 m

-9 m

-10 m

-11 m

-12 m
16 m 15 m 14 m 13 m 12 m 11 m 10 m 9m 8m 7m 6m 5m 4m 3m 2m 1m 0m

E
D

SUPER LONG FRONT

A Max. digging height 13.880 mm
B Max. dumping height 11.680 mm
C Max. digging depth 11.510 mm
D Max. digging reach 15.250 mm
E Max. digging reach at ground level 15.190 mm
F Min. swing radius 3.990 mm

26
Lifting capacity PC210LC/NLC-8 Super Long Front

A – Reach from swing center – Rating over front A

B – Bucket hook height – Rating over side

C – Lifting capacities, including – Rating at maximum reach

bucket (367 kg)

When removing bucket, linkage

or cylinder, lifting capacities can
be increased by their respective
weights.

PC210LC-8 With 700 mm shoes

14,0 m 12,0 m 10,0 m 8,0 m 6,0 m

10,0 m kg 950* 950* 1.750* 1.750*

6,0 m kg 950* 950* 2.050* 1.750 2.050* 2.050*

3,0 m kg 1.000* 1.000 1.500* 1.100 2.400* 1.550 2.650* 2.250 3.100* 3.100* 3.950* 3.950*

0,0 m kg 1.200* 950 1.650* 1.000 2.400 1.400 3.200 1.950 4.200* 2.800 5.900* 4.200

-3,0 m kg 1.550* 1.000 2.250 1.250 3.000 1.750 4.200 2.450 6.450 3.700

-6,0 m kg 2.250 1.250 2.250 1.250 2.950 1.700 4.100 2.350 6.400 3.650

-9,0 m kg 3.400 2.000 4.250 2.550 6.050 3.900

PC210NLC-8 With 500 mm shoes

14,0 m 12,0 m 10,0 m 8,0 m 6,0 m

12,0 m kg 1.050* 1.050* 1.200* 1.200*

10,0 m kg 950* 950* 1.750* 1.750*

6,0 m kg 950* 900 2.050* 1.400 2.050* 2.050*

3,0 m kg 1.000* 750 1.500* 800 2.400* 1.200 2.650* 1.800 3.100* 2.700 3.950* 3.950*

0,0 m kg 1.200* 650 1.650* 700 2.250 1.050 3.100 1.500 4.200* 2.200 5.900* 3.350

-3,0 m kg 1.550* 700 2.150 900 2.850 1.300 4.000 1.900 6.200 2.850

-6,0 m kg 2.150 950 2.150 900 2.800 1.250 3.900 1.800 6.100 2.800

-9,0 m kg 3.250 1.550 4.100 1.950 6.050* 3.050

-10,0 m kg 3.750* 2.050 3.800* 2.100 5.350* 3.200

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
Lifting capacity table is published for guidance only, the machine is not intended for use as a crane.

27
Hydraulic Excavator
PC210/LC/NLC-8

Standard and Optional Equipment

ENGINE CABIN SAFETY EQUIPMENT
Komatsu SAA6D107E-1 turbocharged common rail Reinforced safety SpaceCab™; Highly pressurised Rear view camera system 
direct injection diesel engine  and tightly sealed hyper viscous mounted cab with Electric horn 
EU Stage IIIA compliant tinted safety glass windows, large roof window
Overload warning device 
Suction type cooling fan with radiator fly screen  with sun shade, pull-up type front window with
 Lockable fuel cap and covers 
locking device, removable lower window, front
Automatic engine warm-up system 
window wiper with intermittent feature, sun roller Audible travel alarm 
Engine overheat prevention system  blind, cigarette lighter, ashtray, luggage shelf, floor Boom safety valves 
Fuel control dial  mat Large handrails, rear-view mirrors 
Auto-deceleration function  Heated air suspension seat with lumbar support, Battery main switch 
Engine key stop  height adjustable arm rests and retractable seat 
belt Arm safety valve (not with Super Long Front) 
Engine ignition can be password secured on
 Automatic climate control system  OPG Level II front guard (FOPS) 
request
12 Volt power supply 
OPG Level II top guard (FOPS) 
Alternator 24 V/60 A 
Starter motor 24 V/5,5 kW  Beverage holder and magazine rack 
Batteries 2 × 12 V/140 Ah  Hot and cool box 
DRIVES AND BRAKES
Diesel particulate filter  Radio 
Hydrostatic, 3-speed travel system with automatic
Lower wiper  shift and planetary gear type final drives, and 
Rain visor (not with OPG)  hydraulic travel and parking brakes
HYDRAULIC SYSTEM PPC control levers and pedals for steering and

Electronic closed-centre load sensing (E-CLSS) travel

hydraulic system (HydrauMind)
Pump and engine mutual control (PEMC) system 
SERVICE AND MAINTENANCE
One additional hydraulic circuit (optional with Super Automatic fuel line de-aeration  LIGHTING SYSTEM
 Double element type air cleaner with dust indicator Working lights: 2 revolving frame, 1 boom (l.h.) 
Long Front) 
5-working mode selection system; Power mode, and auto dust evacuator Additional working lights: 4 cab roof (front), 1 cab
economy mode, breaker mode, attachment mode  KOMTRAX™ - Komatsu satellite monitoring system  roof (rear), 1 boom (r.h.), 1 counterweight (rear), 
and lifting mode Multi-function video compatible colour monitor with beacon
PowerMax function  Equipment Management and Monitoring System 
Adjustable PPC wrist control levers for arm, boom, (EMMS) and efficiency guidance
bucket and swing, with sliding proportional control  Toolkit and spare parts for first service  OTHER EQUIPMENT
for attachments and 3 auxiliary buttons Automatic greasing system  Standard counterweight 
Prepared for hydraulic quick-coupler (not with Service points  Heavy counterweight (with Super Long Front) 

Super Long Front) Remote greasing for swing circle and pins 
Additional hydraulic functions (not with Super Long Electric refuelling pump with automatic shut off
 
Front) function
WORK EQUIPMENT Standard colour scheme and decals 
Mono boom  Parts book and operator manual 
UNDERCARRIAGE Two-piece boom 
Biodegradable oil for hydraulic system 
Track roller guards  Super Long Front boom and arm (15 m) (LC/NLC Customised paint 

Track frame under-guards  only)
STD, LC and NLC undercarriages  1,8 m; 2,4 m; 2,9 m arms 

500, 600, 700, 800, 900 mm triple grouser track- Bucket linkage with lifting eye  Further equipment on request

shoes Komatsu buckets 
 standard equipment
Full length track roller guards  Komatsu breakers 
 optional equipment

Your Komatsu partner:

Komatsu Europe
International NV
Mechelsesteenweg 586
B-1800 VILVOORDE (BELGIUM)
Tel. +32-2-255 24 11
Fax +32-2-252 19 81
www.komatsu.eu

UESS11010 1/2017 Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.

Printed in Europe – This specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.