SMC/BMC Design Guide 1

SMC AT I TS BEST: DESI G N F O R MAN U F ACTU R E

From the coffee machines and cookers in our homes, to the electrical cabinets on our streets and the
body panels on our cars, SMC and BMC have been present in our lives for decades. In these, and
countless other applications, SMC and BMC offer competitive and sustainable alternatives to metals
and thermoplastics, and yet these composite materials are still underutilised by many designers and
manufacturers. Here we address a number of frequently asked questions concerning design and
manufacture of SMC/BMC components and offer some practical tips to ensure successful deploy-
ment of these versatile materials.

WHERE SHO UL D S MC/ BMC BE U S E D ?

SMC/BMC materials can be thought of as bridging the

gap between steel and thermoplastics. They deliver
parts that weigh less than metals but provide higher
SMC AND BMC COMPOSITES
strength and stiffness than many thermoplastics. They ————————————————————————
are a particularly good choice for components with
complex shapes. With SMC/BMC it is possible to design Sheet moulding compound (SMC) and bulk mould-
ing compound (BMC) are fibre reinforced polymers,
a highly complex, multi-functional part to replace
also known as composite materials. They consist of
20-25 steel components. This capacity to consolidate
a thermoset resin (typically an unsaturated polyes-
parts at reduced weight has been successfully exploit- ter), a fibre reinforcement, an inorganic filler, and
ed in numerous designs, including automotive various additives to improve processability and
decklids, doors and front-end modules. performance. Formulations can be tailored to deliv-
er specific properties in the final product, such as
fire resistance.
Composites also possess a range of further desirable
properties. Excellent dielectric behaviour means
The reinforcement imparts strength and stiffness to
SMC/BMC is often a safer option than metals for appli- the compound. Glass fibre is the most popular
cations requiring electrical insulation, such as electrici- reinforcement, but carbon fibre can be used to
ty meter cabinets. And extreme temperatures are not provide greater weight savings. In SMC the length of
a problem. the fibre is in the range of 25-50 mm, and in BMC it
is 6-12 mm.

SMC and BMC are converted into components using

cost-effective compression moulding and injection
moulding processes. Production volumes of more
than 1 million parts/year are achievable using these
highly automated, industrial processes.

Because of its longer fibre length, SMC has greater

flexural and tensile strength than BMC. It is ideal
for the manufacture of large, relatively flat, fairly
intricate parts which combine structural perfor-
mance with a smooth finish. The ability to produce
Class A painted surfaces has led to an increasing
number of automotive applications for SMC. BMC is
better suited injection moulding and the manufac-
ture of smaller, more intricate parts. BMC applica-
tions include consumer appliances and car head-
light reflectors.

SMC/BMC components can be recycled at the end

of service life.
1
 SMC/BMC Design Guide 1

WHAT PRODUCTION
VOLUMES ARE POSSIBLE?
SMC and BMC retain their mechanical properties and Compression moulding and injection moulding are
dimensional accuracy over a very wide temperature industrial processes well suited to high levels automa-
range, making them ideal for applications where the tion. Fast cycle times and high production rates are
behaviour of metals and thermoplastics may be dimin- easily achieved, whilst also delivering process consis-
ished, such as components installed in polar regions, tency, and great predictability of dimensions and part
or valve covers for car/truck engines. SMC/BMC is also performance. Typical cycle times are of the order of 1-2
a poor conductor of heat and well suited to high minutes for parts with 2-3 mm wall thickness.
temperature applications where a metal part would
become too hot to touch. This is one of the reasons 20 years ago it was already possible to manufacture
why the exterior housings of kitchen appliances such SMC waterproof housings for outdoor lighting at a rate
as sandwich toasters and waffle makers are often of 15,000 parts a day (more than 2.5 million parts per
made of BMC. year) in a factory operating with 21 robots and only
three people. The components were 1.3 mm thick and
Composite materials are also extremely durable and 1.3-1.6 m long and the reject rate was 0.6%. This
resistant to abrasion, corrosion and weathering, enabled the parts to be highly cost competitive with
resulting in very low maintenance requirements and a comparable thermoplastic and metal alternatives.
longer service life.
Since then SMC technology has continuously
progressed and it is now mature and ready to use for
your end-use application.

Very thick SMC parts require longer moulding cycles. For typical SMC applications on trucks, like spoilers
For example, a cycle time of 1.5 hours was required for and fenders, 10,000 parts/year is common. For higher
the SMC housing of a swimming pool pump. This volume SMC parts like electrical cabinets, and BMC
component was 130 mm thick in places and weighed parts in appliances, volumes can easily build up to
160 kg. SMC was selected to withstand the corrosive 100,000s of parts/year.
effects of seawater, as well as for its design flexibility
and dimensional accuracy.

2
 SMC/BMC Design Guide 1

HOW IS A SUCCESSFUL SMC/BMC DESIGN DEVELOPED?

The design of an SMC/BMC part is not solely a job for the design team. The design must fulfill the func-
tional requirements of the application, but it is also essential that the part can be manufactured as
efficiently and economically as possible. Developing the design, the material, the moulds and the
production process in parallel is the key to success.

The good news is that huge advances have made in All stages of the production line – from material prepa-
SMC/BMC materials over the past 30 years. A broad ration, to moulding, through to finishing – should be
range of standard SMC/BMC formulations tailored for optimised to ensure fast cycle times and minimal
specific applications are now available and their prop- waste. In an optimised process both reject parts and
erties are well documented. Formulations are more production waste can be reduced significantly,
consistent and much easier to mould, enabling more conserving resources and lowering costs.
reliable production and the manufacture of high-quali-
ty parts of more complex shape. If this collaborative approach is taken, a development
time of 1.5-2 years from the first design to the start of
Correct mould design and construction is also crucial production is typical. For a very simple design, with
to minimise rejects and production downtime. If the one simple mould, this could be cut to as little as little
mould maker is not consulted during the design as six months or less.
process there are likely to be issues in realising some
features of the mould. This could lead to problems in
releasing the part from the mould, or a need for more
frequent mould maintenance.

3
 SMC/BMC Design Guide 1

WHAT ARE THE STEPS WHICH MAIN DESIGN

IN THE DESIGN PROCESS? ELEMENTS INFLUENCE
THE PART’S COST?
The design and validation steps for SMC/BMC are The weight of the part (amount of material used) is of
similar to those for a thermoplastic part. The designer course a major factor, but the thickness of the part is
creates a computer aided design (CAD) model of the also important. Thinner sections cure faster, enabling
part and simulates its mechanical performance under faster cycle times.
real-world conditions using finite element analysis
(FEA) software. The complexity of the design will also influence the
cost of the mould. Features such as undercuts add
The missing link for the development of SMC parts is complexity. Simpler moulds with less undercuts (and
information on how the fibre is orientated, which will consequently fewer moving parts) will lead to lower
strongly influence the part’s mechanical behaviour. maintenance costs, reduced mould downtime, and
For optimum performance the majority of fibres higher production output. An undercut of even 2 mm
should be orientated along the main load paths. Sever- can have large consequences for the design of the
al brands of software are now available to simulate the mould.
compression moulding process, indicating how the
mould will fill and the orientation of the fibres. This
enables the mechanical properties in each element of
the FEA mesh to be calculated far more accurately
than from use of supplier/laboratory data and leads to
more precise results from the structural analysis. The
moulding simulation also provides useful data on
MOULDING TERMINOLOGY
mould fill time and highlights the presence of any ——————————————————————
undesirable effects such as weld lines. The choice of
material, the design of the part or mould can then be
DRAFT ANGLE
modified as necessary.
The degree of taper allowed on the sides of a
mould so that the part can be removed.

EJECTOR PINS
A series of telescopic pins hidden in the male
side of a mould that lift in unison to remove a
cured part from the mould.

UNDERCUT
A negative or reverse draft in a mould that
does not allow part removal without a special
moveable section in the mould construction.

WELD LINES (KNIT LINES)

Surface defects or areas of reduced structural
integrity which potentially occur when flow
fronts meet in the mould cavity.

4
 SMC/BMC Design Guide 1

WHERE DO THI N G S TY P I CALLY G O

W RO NG IN THE D E V E LO P ME N T P R O CE S S ?
As discussed previously, designing the part without For example, centering of the mould – typically
considering the whole manufacturing process is a achieved by adding wear plates around the mould to
frequent mistake. Small changes in part design will precisely guide the two halves of the mould as it
influence manufacturing layout and impact manufac- closes – is a standard mould design. If centering is
turing efficiency. eliminated to reduce mould cost, the mould shear
edge (the 0.1 mm gap between the mould halves
The second common error is incorrect design of the which allows air to escape but prevents SMC flowing
moulds. Some companies are tempted to cut costs in out of the mould) can be damaged after moulding as
the area of mould construction, but this is a false econ- few as 100 parts, resulting in reject parts, production
omy since the resulting moulds are not optimised and downtime, and maintenance costs. In the end, the
do not work efficiently. Although the company initially overall project cost is higher.
saves some money on moulds, ultimately they lose far
more through inefficient production. The efficient release of the part from the mould is
another important consideration. Investment in a
more sophisticated ejection system which guarantees
smooth, reliable ejection of parts will quickly be repaid
through lower reject rates and reduced downtime.

HOW MUCH DOES AN

SMC MOULD COST?
The typical cost of a steel mould for moulding SMC is
less than €100,000, which is approximately 10-30%
lower than the price of a comparable mould for
thermoplastics.

The cost of an aluminium mould is lower than steel, but

aluminium is less suitable for higher volume produc-
tion. As a guideline, a steel mould can mould
10,000-15,000 parts, while an aluminium mould needs
to be replaced after 500-1000 parts.

For prototypes, although a less expensive aluminium

mould may seem attractive, a steel mould moulds more
reliably (with fewer rejects) and it can be re-used for the
first series of production.

The cost of a steel prototype mould depends on the

design of the part. For a part of approximately 1m x 1m,
without ribs, the price could be around €10,000-15,000.
If there are ribs the part ejection process is more
complicated, which increases the cost.

5
 SMC/BMC Design Guide 1

IS IT BETTER TO MANUFACTURE PARTS IN-HOUSE

OR OUTSOURCE PRODUCTION?
Manufacturers choosing to use SMC/BMC for the first There are a variety of SMC/BMC moulders active in the
time should consider whether they want to mould the market and each will have their own specialities and
parts themselves or outsource this work. Obviously, strengths. A key consideration when selecting a
outsourcing does not require investment in moulding sub-contractor is their ability to design the moulds
presses and allows the moulder’s processing and correctly. A design and development partner familiar
design experience to be exploited. Many companies, with the SMC/BMC supply chain can help the manufac-
however, have decided that developing in-house turer choose the right moulder for their project.
SMC/BMC moulding capabilities is of strategic impor-
tance and have therefore invested in building their own
expertise and manufacturing footprint.

ACKNOWLEDGEMENTS

The European Alliance for SMC/BMC would like to thank Jean-Luc Labonne for his invaluable assistance in creating
this guidance. Jean-Luc Labonne possesses more than 25 years of industrial experience in manufacturing SMC/BMC
components for a broad range of applications and markets. In 2016 he established the consultancy CIME, in Queti-
gny, France, and now advises companies on how to develop SMC/BMC parts and optimise their production process-
es. He can be contacted by e-mail: [email protected]

The European Alliance for SMC BMC

Sector Group of EuCIA
Blvd. A. Reyers 80
1030 Brussels
Belgium
www.smcbmc-europe.org
[email protected]

January 2021

Disclaimer
This article is intended for general information
only, and whilst its contents are provided in good
faith it is to be relied upon at the user’s own risk.
No representations or warranties are made with
regards to its completeness or accuracy and no
liability will be accepted by the authors.