Scribd
Upload
68 views3 pages

Microprocessors and Microcontrollers/Assembly Language of 8086 Multiple Choice Questions

This document contains 16 multiple choice questions about assembly language and operations in 8086 microprocessors. The questions cover topics like effective addressing modes, conditional branch instructions, trap vectors, I/O ports, arithmetic and logical instructions, shifts, pushes, divides, and adjustment instructions. The correct answers are provided at the end.

Uploaded by

Vaibhav Godbole
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views3 pages

Microprocessors and Microcontrollers/Assembly Language of 8086 Multiple Choice Questions

This document contains 16 multiple choice questions about assembly language and operations in 8086 microprocessors. The questions cover topics like effective addressing modes, conditional branch instructions, trap vectors, I/O ports, arithmetic and logical instructions, shifts, pushes, divides, and adjustment instructions. The correct answers are provided at the end.

Uploaded by

Vaibhav Godbole
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions

1. The contents of different registers are given below. Form Effective addresses for
different addressing modes are as follow :
Offset = 5000H
[AX]- 1000H, [BX]- 2000H, [SI]- 3000H, [DI]- 4000H, [BP]- 5000H,
[SP]- 6000H, [CS]- 0000H, [DS]- 1000H, [SS]- 2000H, [IP]- 7000H.
I. MOV AX, [5000H]
a) 5000Hb) 15000H c) 10500H
II. MOV AX, [BX] [SI]
a) 13000H b) 15000H c) 12000H
III. MOV AX, 5000H [BX] [SI]
a) 20000H b) 1A000H c) 1A00H
2. The conditional branch instruction JNS performs the operations when if __
a) ZF =0 b) SF=0 c) PF=0 d) CF=0
3. Vector address of TRAP
a) 24H b) 36H c) 24 d) 18H
4. SOD pin can drive a D flip-flop?
a) SOD cannot drive any flip-flops.
b) SOD cannot drive D flip-flop, but can drive any other flop-flops.
c) Yes, SOD can drive D flop-flop.
d) No, SOD cannot drive any other flop-flops except D flop-flop.
5. IDIV and DIV instructions perform the same operations for?
a) Unsigned number b) Signed number c) Signed number & Unsigned number d)
none of above.
6. What is the output of the following code
AL=88 BCD, CL=49 BCD
ADD AL, CL
DAA
a) D7, CF=1 b) 37, CF=1 c) 73, CF=1 d) 7D, CF=1
7. What is the output of the following code
AL= 49 BCD, BH= 72 BCD
SUB AL, BH
DAS
a) AL=D7, CF=1. b) AL=7D, CF=1. c) AL=77, CF=1 d) none of them.
8. What is the output of the following code
AL= -28 decimal, BL=59 decimal
IMUL BL
AX=? , MSB=?
a) AX= F98CH, MSB=1. b) AX= 1652, MSB=1. c) BX F9C8H, MSB=1. d)
BX= 1652, MSB=1.
9. What is the output of the following code
AL= 00110100 BL= 00111000
ADD AL, BL
AAA
a) AL = 6CH b) 12H c) 12 d) C6H
10. What is the output of the following code
AL=00110101 BL= 39H

M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/1


Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions

SUB AL, BL
AAS
a) AL= 00000100, CF=1 b) BL=00000100, CF=0 c) AL=11111100 CF=1 d) BL=
00000100, CF=1
11. What is the output of the following code
CF =0, BH = 179
RCL BH, 1
a) CF=0, OF= 1, BH= 01100101 b) CF=1, OF=1, BH=01100110
c) CF=1, OF =0, BH= 01001101 d) CF=0, OF=0, BH=00101100
12. What is the output of the following code
SI=10010011 10101101, CF=0
SHR SI, 1
a) 37805, CF=1, OF=1 b) 18902, CF=1, OF=1
c) 19820, CF=1, OF=1 c) 53708, CF=1, OF=1
13. What is the output of the following code
BX=23763 CL=8
ROL BX, CL
a) 0101110011010011, CF=0 b) 1101001101011100, CF=0
c) 0110100010011101, CF=1 c) 1011100110001100, CF=1
14. What is the output of the following code
PUSH AL
a) Decrement SP by 2 & push a word to stack
b) Increment SP by 2 & push a word to stack
c) Decrement SP by 2 & push a AL to stack
d) Illegal
15. What is the output of the following code
AX = 37D7H, BH = 151 decimal
DIV BH
a) AL = 65H, AH= 94 decimal
b) AL= 5EH, AH= 101 decimal
c) AH= E5H, AL= 5EH
d) AL= 56H, AH= 5EH
16. In 8086 microprocessor one of the following instructions is executed before an
arithmetic operation
a) AAM b) AAD c) DAS d) DAA

M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/2


Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions

Key:
2.1 (I) B (II) C (III) B 2.2 B 2.3 A 2.4 C 2.5 B
2.6 B 2.7 C 2.8 A 2.9 C 2.10 A 2.11 B
2.12 B 2.13 B 2.14 D 2.15 B 2.16 B

M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/3

You might also like