JSA For Electrical Work TCF3-Haradh
JSA For Electrical Work TCF3-Haradh
JSA For Electrical Work TCF3-Haradh
FOR
JOB TITLE:
ELECTRICAL WORKS
TCF-3 Haradh
Safety helmet, Face Shield/Welding Glasses, Safety shoe, Ear protection, Dust Mask, Full
List of PPE’s for Each Person
body harness, Gloves as per job, FRC as per job.
Barricades, Warning signs, Fire extinguisher, Canopy/Fire proof, Blanket, Machine should be in good working condition.
5 Very High 5A 5B 5C 5D 5E
4 High 4A 4B 4C 4D 4E
3 Medium 3A 3B 3C 3D 3E
2 Low 2A 2B 2C 2D 2E
1 Very Low 1A 1B 1C 1D 1E
A B C D E
Severity / (Very Low) (Low) (Medium) (High) (very High)
Consequences
Medium Risk
Low Risk
JSA FOR HOT WORKS
JOB TITLE:
Adverse Road condition Not to take any unwanted risk during shifting.
Plan ahead for the route and always be alert for any
consequences.
Get a map and use and use alternative route for better
road condition.
Presence of mind while behind the wheel and expect
the unexpected. Make eye contact with other
commuters.
JSA FOR HOT WORKS
JOB TITLE:
2 Set up work area Lighting is not enough 3C Prior to start of work we have to ensure there is adequate
light.
Congestion of work area The access area clear of any sort of obstruction
Slips , Trip and Fall Good housekeeping to ensure all around the area
3 Welfare provision Heat stress 2C Cool drinking water station shall be available with regular
water supply
Sanitary waste Toilet facilities with proper disposal of sanitary waste
Hand wash facilities
7 Housekeeping Uncleaned area 2C Promptly clean and dispose all the debris from work.
Scattered materials Keep the materials in a tidy manner during and after work
Trips Do not keep extension cords in a scattered manner, if
passing through walking aisles or road proper protection to
take wither lift it over head or keep inside the sleeve.