Scribd Logo
Upload

Welcome to Scribd!

  • 350 views

    MAT 3421 MCGB - Data Sheet For Suppliers Old MAT No.: 362

    Uploaded by

    Diógenes da Silva Pereira
    This document provides information on MAT 3421, an abrasion resistant cast iron alloyed with chromium. It lists the material's properties, chemical composition limits, mechanical properties, alternative international standards, delivery conditions, and revision history. The material has high abrasion resistance from a eutectic or hypoeutectic structure containing Fe-Cr-carbides in a martensitic matrix. Its composition is within specified limits to achieve this structure. Delivery requires approval of a sample sent to the RD-PD-Metallurgy department before an order is placed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MAT 3421 MCGB - Data Sheet For Suppliers Old MAT No.: 362

    Uploaded by

    Diógenes da Silva Pereira
    350 views3 pages
    This document provides information on MAT 3421, an abrasion resistant cast iron alloyed with chromium. It lists the material's properties, chemical composition limits, mechanical properties, alternative international standards, delivery conditions, and revision history. The material has high abrasion resistance from a eutectic or hypoeutectic structure containing Fe-Cr-carbides in a martensitic matrix. Its composition is within specified limits to achieve this structure. Delivery requires approval of a sample sent to the RD-PD-Metallurgy department before an order is placed.

    Original Title

    3421

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on MAT 3421, an abrasion resistant cast iron alloyed with chromium. It lists the material's properties, chemical composition limits, mechanical properties, alternative international standards, delivery conditions, and revision history. The material has high abrasion resistance from a eutectic or hypoeutectic structure containing Fe-Cr-carbides in a martensitic matrix. Its composition is within specified limits to achieve this structure. Delivery requires approval of a sample sent to the RD-PD-Metallurgy department before an order is placed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    350 views3 pages

    MAT 3421 MCGB - Data Sheet For Suppliers Old MAT No.: 362

    Uploaded by

    Diógenes da Silva Pereira
    This document provides information on MAT 3421, an abrasion resistant cast iron alloyed with chromium. It lists the material's properties, chemical composition limits, mechanical properties, alternative international standards, delivery conditions, and revision history. The material has high abrasion resistance from a eutectic or hypoeutectic structure containing Fe-Cr-carbides in a martensitic matrix. Its composition is within specified limits to achieve this structure. Delivery requires approval of a sample sent to the RD-PD-Metallurgy department before an order is placed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    MAT 3421

    MCGB - DATA SHEET FOR SUPPLIERS Old MAT No.: 362, -, -


    Abrasion Resistant Cast Iron, Cr-alloyed
    (Ducrodan)
    For more information contact FLSmidth

    PROPERTIES:
    Chromium alloyed cast iron with high abrasion resistance.
    To ensure the highest possible impact resistance, the structure has to be eutectic or slightly hypoeutectic,
    with Fe-Cr-carbides in a martensitic matrix.
    The composition limitation indicated below can be used as guidance to obtain a hypoeutectic or eutectic
    structure.
    The composition is well inside the limits stated in the alternative standards referred to.

    Instructions:
    FLS, Instruction V-2821-xx
    Cast lining parts

    CHEMICAL COMPOSITION:
    % C max or % Si max or % Mn max or % P max or % S max or % N max or % Al min or
    Dim. mm
    range range range range range range range
    2.6-2.8 1.0 1.0 - - - -

    % Cr max or % Mo max or % Ni max or % V max or % Nb max % Ti max or % Cu max or % Other max


    Dim. mm
    range range range range or range range range or range

    25-27 - - - - - - -
    It is recommended to keep the composition within this range to obtain an eutectic or hypoeutectic structure.

    MECHANICAL PROPERTIES AT ROOM TEMPERATURE:


    Tensile Imp. Energy
    Yield Strength Elong. M.Elas
    Strength Area Reduction Hardness KV, Min
    Condi- Dim. MPa % GPa
    MPa
    tion mm
    Rm Re A5 Z Z⊥ E HRc HB HV °C J
    HT - - - - - - - 390-450
    HT = Heat Treated. A possible heat treatment is given in EN 12593 (2000): Soft annealing.
    Another possible heat treatment is suggested in V 2821-xx and should be treated as guidance.

    Rev_No : 4,0 Issue Date: 01-06-1998 Prepared by: BKL


    Revision Date: 12-06-2014 Approved by: KHN Page 1 of 3
    MAT 3421

    MCGB - DATA SHEET FOR SUPPLIERS Old MAT No.: 362, -, -


    Abrasion Resistant Cast Iron, Cr-alloyed
    (Ducrodan)
    For more information contact FLSmidth

    ALTERNATIVE INTERNATIONAL STANDARDS TO MAT 3421


    Standard Type of Material Name of Material Material No.
    ASTM A 532/A 532M (2010) Casting Class III, Type A .
    EN 12513 (2011) Casting EN-GJN-HB555(XCr23) 5.5610
    GB/T 8263 (1999) KmTBCr26

    ASTM : American Society for Testing Materials EN: European Norm


    BS: British Standard ISO: International Organisation for Standardization
    DIN: Deutsche Industrie-Norm JIS: Japanese Industrial Standard
    GB/T: Chinese Standard

    DELIVERY CONDITIONS:
    To be delivered according to Instruction V 2821-xx.
    When taking in new suppliers a sample sized 100x100x80 mm must be shipped to the RD-PD-Metallurgy
    department for approval before a purchase order can be placed. The sample must be followed by
    documentation stating chemical composition, hardness and heat treatment.

    Rev_No : 4,0 Issue Date: 01-06-1998 Prepared by: BKL


    Revision Date: 12-06-2014 Approved by: KHN Page 2 of 3
    MAT 3421

    MCGB - DATA SHEET FOR SUPPLIERS Old MAT No.: 362, -, -


    Abrasion Resistant Cast Iron, Cr-alloyed
    (Ducrodan)
    For more information contact FLSmidth

    Revisions:
    Rev. No. Rev. Date Change Responsible
    0,60 10-02-2002 Prepared & Approved changed. AnJo
    References to Alternative Standards added to supplier version.
    Composition limits have been constricted
    0,70 15-01-2004 Standards updated. Rev_no updated: An extra decimal place is added. AsK
    1,0 08-06-2005 Rev. no. changed to 1,0 AsK
    2,0 29-10-2007 Alternative international standard revised AsK
    3,0 19-03-2010 Alternative Chinese standard added. Footer updated. AsK
    4,0 12-06-2014 Alternative standard updated. Name of alternative EN material is now BKL
    specified in accordance with hardness in HB.

    Rev_No : 4,0 Issue Date: 01-06-1998 Prepared by: BKL


    Revision Date: 12-06-2014 Approved by: KHN Page 3 of 3

    You might also like