Self-Propelled Articulating Booms

™
Z -135/70
Specifications
Model Z-135/70 Range Of Motion Z-135/70
Measurements US Metric 140 ft
42.67 m
Working height maximum* 141 ft 43.15 m
Platform height maximum 135 ft 41.15 m 130 ft
39.62 m
Horizontal reach max - riser extended 59 ft 2 in 18.03 m
Horizontal reach max - riser retracted 69 ft 9 in 21.26 m 120 ft
36.58 m
Up and over clearance maximum -
110 ft
riser extended 75 ft 6 in 23.01 m 33.53 m
riser retracted 32 ft 6 in 9.91 m 100 ft
Below ground reach 19 ft 3 in 5.87 m 30.48 m

A Platform length - 8 ft / 6 ft model 3 ft / 2 ft 6 in 0.91 m / 0.76 m 90 ft

27.43 m
B Platform width - 8 ft / 6 ft model 8 ft / 6 ft 2.44 m / 1.83 m
C Height - stowed 10 ft 1 in 3.07 m 80 ft
24.38 m
D Length - stowed 42 ft 5 in 12.93 m
E Width - axles extended 12 ft 11 in 3.94 m 70 ft
21.34 m
Width - axles retracted 8 ft 1 in 2.46 m
60 ft
F Wheelbase - axles extended 13 ft 6 in 4.11 m 18.29 m
Wheelbase - axles retracted 15 ft 6 in 4.72 m
50 ft
G Ground clearance - center 1 ft 8 in 0.51 m 15.24 m

40 ft
12.19 m
Productivity
Lift capacity 600 lbs 272 kg 30 ft
9.14 m
Platform rotation 160°
Vertical jib rotation 110° 20 ft
6.1 m
Turntable rotation 360° continuous
10 ft
Turntable tailswing - axles extended riser up 2 ft 7 in 0.79 m 3.05 m
Turntable tailswing - riser down 14 ft 4.27 m 0 ft
Drive speed - stowed 3.0 mph 4.8 km/h 0m

Drive speed - raised 0.68 mph 1.1 km/h -10 ft

-3.05 m
Lift speed to full height 96 sec
Gradeability - stowed** 45% -20 ft
-6.1 m
Inside turning radius - axles extended 7 ft 6 in 2.29 m -30 ft -20 ft -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft
-9.14 m -6.1 m -3.05 m 0m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m
Inside turning radius - axles retracted 18 ft 1 in 5.51 m
Outside turning radius - axles extended 18 ft 6 in 5.64 m
Outside turning radius - axles retracted 25 ft 6 in 7.77 m
Controls 12 V DC proportional * The metric equivalent of working height adds 2 m to platform height.
Tires 445/65 D22.5 18 ply foam-filled U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for
details regarding slope ratings.
Power *** Weight will vary depending on options and/or country standards.

Power source Deutz Diesel TD 2011 L04i 4-cylinder turbo diesel, 74 hp (55 kW)
Perkins Diesel 804-33T 4-cylinder turbo diesel, 83 hp (62 kW)
Auxiliary power unit 12 V DC
Hydraulic tank capacity 65 gal 246.1 L
Fuel tank capacity 40 gal 151.4 L

Weight***
44,900 lbs 20,366 kg

Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10

E B
C

G
F
D

www.genielift.com
 Self-Propelled Articulating Booms
™
Z -135/70
Features
Standard Features Easily Configured To Meet Your Needs Options & Accessories
Measurements Platform Options Productivity Options
• 141 ft (43.15 m) working height • Steel 8 ft (2.44 m) (standard) • Platform swing gate
• 69 ft 9 in (21.26 m) horizontal reach • Steel 6 ft (1.83 m) • Half-mesh platform inserts with
• 75 ft 6 in (23.01 m) up and over clearance • Steel 6 or 8 ft (1.83 or 2.44 m) tri-entry swing gate
• Up to 600 lb (272 kg) lift capacity • Platform top auxiliary rail
Jib • Air line to platform
Productivity • 12 to 20 ft (3.66 to 6.10 m) Jib-Extend™ • Arc Pro 275™ Heavy-Duty Welder
• ™
Xchassis extendable axles package
Engine Options • Welder Ready package
• 12 to 20 ft (3.66 to 6.10 m) Jib-Extend™
• Self-leveling platform • Deutz turbo diesel, 74 hp (55 kW) • Weld leads to platform
• Hydraulic platform rotation • Perkins turbo diesel, 83 hp (62 kW) • Biodegradable hydraulic oil
• Fully proportional joystick controls • Aircraft protection package
Drive/Steer (6ft platform only)
• On board full diagnostics and engine
monitoring display • 4WD (standard) • Hostile environment kit
• ALC 1000 electronic control system • 4WS (standard) • Deluxe hostile environment kit
• Hydraulic oil cooler • Thumb rocker steer
Tire
• Drive enable • Tool tray
• Extra-wide rough terrain foam-filled • Pipe cradle (pair)
• AC power cord to platform (standard)
• Horn • Flashing beacon
• Solid rough terrain tires (optional)
• Hour meter • Panel cradle package*
• Tilt alarm • Lockable platform control box covers
• Descent, motion, & travel alarms • Work light package
• 360° continuous turntable rotation
Power Options
• Four wheel high angle steer
• AC generator packages (110V/60Hz,
• Four steering modes: front, rear, crab
3000W or 220V/50Hz, 2500W)
and coordinated
• Cold Weather Packages
• Four wheel brakes
• Arctic Packages
• Full-time positive traction 4WD
• Diesel scrubber muffler (Cummins)
• Adjustable foot switch timeout
• Diesel scrubber/spark arrestor muffler
• Two speed wheel motors
(Deutz and Perkins)
• Configurable controls to limit lift height
• Diesel spark arrestor muffler
to 91 ft (27.74 m)
(Deutz and Perkins)
• Engine status display

Power
• All engines are emissions compliant
• 12 V DC auxiliary power
• Engine protection package
• Deutz intake air heater
• Swing out engine tray * Available on select models

Genie United States Genie Europe Distributed By:

18340 NE 76th Street The Maltings
P.O. Box 97030 Wharf Road
Redmond, Washington 98073-9730 Grantham NG31 6BH
Telephone +1 (425) 881-1800 UK
Toll Free in USA/Canada +1 (800)-536-1800 Telephone +44 (0)1476 584333
Fax +1 (425) 883-3475 Fax +44 (0)1476 584334
Email: AWP-InfoEurope@terex.com

Effective Date: February, 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual
for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2012 Terex Corporation.

Z135 3.5K 0109L. Part No. 109366 www.genielift.com