■ Warranty

Immediate repair and/or part replacement shall be provided for breakage/poor condition to be clearly
considered as our responsibility and to be generated within one year after our delivery from our factory. And

R-TYPE
only if the claimed defect arose during normal use, applications and service.
Consumable parts and their replacement shall be out of our warrantee.
However, the following cases shall not be warranted.
(1) In case of operating with % ED rate exceeding the limit and very high frequency.
HOIST GUIDE
(2) In case of operating with the load more than the rated load.
(3) In case of modifying the products and/or accessories without our approval.
(4) In case of operating under very severe conditions exceeding the conditions of their specifications. 500kg a 30t
(5) In case of operating, neglecting Caution/Danger items mentioned in this operation manual.
Any damage for production down to be caused by saddle damage shall not be warranted.

We will not supply any parts that become inoperative because of improper maintenance, eccentric loading,
overloading, chemical or abrasive action, excessive heat, or other abuse.
Equipment and accessories not of our manufacture are warranted only to the extent that they are warranted
by the manufacturer, and only if the claimed defect arose during normal use, applications and service.
EXCEPT AS STATED HEREIN, WE MAKE NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
“Normal use, applications and service”: Those conditions during which a electric hoist, other products,
equipment or accessories is (are) being operated and is (are) performing functions within the scope of the
original design.

●Ordinary type

Caution ●Low headroom type

Do not use our electric hoist or other products in an explosive atmosphere or corrosive environment.
Do not use our electric hoist or products for passenger elevator application. ●Double rail type

Our products are exempted from the scope of guarantee if exported to other nations regulated by the PL law
than Japan.
●Inverter type

●Low headroom Inverter type

●Double rail Inverter type

Advanced technology and dedicated service

KAMIUCHI ELECTRIC WORKS, LTD.
D.
HEAD OFFICE
5-31, TAGAWA 2-CHOME, YODOGAWA-KU,
OSAKA 532-0027, JAPAN
TEL:06-6301-6751 FAX:06-6308-0389
TOKYO OFFICE
22-7 3F, HAMAMATSU-CHO 1-CHOME, MINATO-KU,
TOKYO 105-0013, JAPAN
TEL:03-6402-4525 FAX:03-6402-4526
AYABE FACTORY
ENSHO, 1, TAKATSU-CHO, AYABE-CITY, KYOTO 623-0045,
JAPAN TEL:0773-42-1270 FAX:0773-42-6551
URL http://www.kamiuchi.co.jp/
E-mail o s h i @kamiuchi.co.jp (OSAKA OFFICE)
toshi @kamiuchi.co.jp (TOKYO OFFICE)

Printed in Japan 16.06.500.DP

 APPLICATION OF CONSTRUCTION STANDARDS R R TYPE HOIST

Ordinary Type Double Rail Type

Before selecting hoists, investigate operating and environmental conditions.
1.｢Capacity｣ How many tons is the lifting load ?
2.｢Lifting｣ How many meters is the lifting height ?
3.｢Operating conditions｣ Indoor or Outdoor ?
4.｢Application｣      Up and Down, Up/Down and Left/Right, or Up/Down Plus East/West/South/
North (Crane operation) ?
5.｢Power supply｣ How many voltage and 50Hz or 60Hz ?

Rated load shows the maximum load which hoist can lift up.
Over load can not be admitted by the relative laws and regulation.
The most suitable normal load is 50-63% of the rated load for safety and long time operation.

Lifting height is the height to lift up the load.

Select the height at the time when the hook reached the ground.
It is regulated that more than two rounds of wire should remain on the drum at the lowest position.

SPECIAL OPERATING CONDITIONS

There would be case where the standard hoist can not be used according to operation and/or environmental conditions. KAMIUCHI have
been manufacturing lots of special hoists in order to comply with wide requests from our customers. Pay attention to the following conditions.

1. Different voltage 4. Alteration of speed ■ Features ■ Safety device

Instruct voltage and frequency other than standard power In case both low or high speed is to be required, there is a
● The totally-enclosed, self-cooled, class F insulation motors, de- ● Magnet (Electromagnetic) brake
supply 3 phase AC200V 50/60Hz and AC220V 60 Hz. case that the modification can be made with the same model
signed for the new series, have high efficiency, high perform- Disc type DC brake is applied for winding-up and trolley.
2. Designation of control voltage or a case that the alteration of the model is necessary.
ance, and high torque, and excel in durability. Lining made from Non-asbestos material with excellent abrasion
In case of different voltage and less than 200V, a transformer 5. Stationary type ● All motors are furnished with an external terminal box, and are resistant performance is applied and so can be used for long
is to be required and so instruct it to us. Stationary type, which can be used as winch, is manufactured easy to wire and maintain. time without anxiety. Their construction is very simple and easy
3. Operating environment separately. ● Made of excellent heat resistant insulating materials, the insu- for the brake gap adjustment. Easy usage and performance are
Indoor operation is a standard. In case of outdoor operation, 6. Lifting height lation system is high in reliability, resisting humidity, heat and improved remarkably.
the housing is necessary. Standard specification can be In special high lifting height type of ordinary type hoist the environment. ● Dual upper limit switch
applied to small amount of dust. Special specifications are to lifting height up to 45m is standardized. The control circuit is cut off by the first upper limit switch to stop
● The torque characteristic and starting input characteristic have a
be required for applications where acid and/or steam exist. (In case of double rail type, up to 36m) lifting. In the case of reverse phase operation, reverse winding
sufficient allowance.
No anti-explosive type is available. or short-circuit the second upper limit switch cut off the main
● The hoist motor is provided with radiation fin, which keeps the
circuit, of the hoist motor.
temperature rise to a minimum.
● Load limiter (option)
CLASSIFICATION OF LIFTING DEVICE ● All the motors are of a low noise type. Overload preventing device through electric current detecting
Less More More More More More More ● As Trolley brake is equipped with Release device, hoist can be system.
Total operating hour than 800 1600 3200 6300 12500 than
(Average daily operating hour) 800 Less Less Less Less Less 25000 moved under Power supply cut-off condition at the time of in- ● Power line sensor (option)
Load rate 1600 3200 6300 12500 25000 stallation and maintenance and inspection. Contact-fusion detecting device. Voltage converter will be
(≦0.5) (≦1) (≦2) (≦4) (≦8) (≦16) (16＜)
100%
● As Trolley motor is equipped with heat radiator fin and external required, if the power source for main circuit is NOT 3-phase,
Normally less than 50% of rated load. fan, it can restrain heat increase. 200V (50Hz/60Hz). Consult us.
Light load Load
Seldom at rated load.
A A A B C D E
0% hour 100%
● Thermal unit (option)
Detecting the winding temperature of the motor, this is a safety
100%
Normally more than 50% and ■ Standard Specification unit to stop the motor when the temperature exceeds the limit.
Medium load Load less than 63% of rated load. A A B C D E F
Sometimes at rated load. Three-phase 200V 50Hz/60Hz, 220V 60Hz, 380V ·
0% hour 100% Power source
400V 50Hz, 400V · 440V 60Hz
100%
Normally more than 63% and ■ Monorail Size (I-beam)
Control Pendant control unit for floor-operation
Heavy load Load less than 80%. A B C D E F F
Often at rated load. Rating 60 minute rating Rated Load Flange width (mm)
0% hour 100%

100% Power feeding method Electric power shall be supplied to the control panel. 500kg · 1t 100※, 125※※, 150※
Normally more than 80%.
Extra heavy load Load
Mostly at rated load or nearly rated load.
B C D E F F F Service temperature From –10°C to +40°C 2t 125※※, 150, 175※
0% hour 100%
Service humidity 90%RH or less (No dew) 2.8t · 3t 125※※, 150, 175※
Protective structure Totally enclosed dustproof type
5t 125※, 150※※, 175
■APPLICATION EXAMPLE OF LIFTING DEVICE CLASS TO VARIOUS CRANE ■HOIST CLASS, ED RATE AND STARTING FREQUENCY Duty rating 40%ED
7.5t 150, 175※※, 190※
CRANE TO BE APPLIED CLASSIFICATION OF LIFTING DEVICE,ETC. ED RATIO STARTING Pertinent JIS C 9620 (Electric Hoist) and Japanese
TYPE CLASS (%ED) FREQUENCY
standards Construction 10t 150, 175※※, 190※
Crane for Electric power generating station use (Time/hour) Flange width
A
Crane for Disassembly and inspection use R D 40 240 Hoist body Munsell 2.5BG6/6.5 15t 175※※, 190
Crane for Machine and Erection plant use A Trolly motor Munsell 2.5PB7/4
• Hoist with creep speed (Ex. RMT-1CT and same series) 20t 175※※, 190
Crane for general plant B-D Hoist class is same class D. Paint color Control box Munsell 5Y7/1 ※※
Overhead travelling crane (with bucket and with magnet) But duty rating is 25% ED and starting frequency is 200 times per hour. Sheave cover (Hook block) Munsell 2.5Y8/12(over 5t) Flange width in the mark will be shipped.
D-F
If flange width in the ※mark is specified, please let us know before
General bridge type crane B-C Sheave cover (Hook block) Munsell 5.5YR6.5/12(bellow 3t) shipment.

1 2
 Ordinary type • Motor trolley hoist Low headroom type • Motor trolley hoist

B A
W E

Q
N Lower

M
Lower flange flange
Lower flange
Lower flange
T

H
D C

L
500kg∼5t 7.5t∼15t 20t 500kg∼5t

●Specification ●Specification ●Specification

Rated Load 500kg 1t 2t 2.8t 3t 5t 7.5t 10t 15t Rated Load 20t Rated Load 500kg 1t 2t 2.8t 3t 5t

RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT-
Model Model Model
1/2CNN 1/2CHNN 1CNN 1CHNN 2CNN 2CHNN 2.8CNN 2.8CHNN 3CNN 3CHNN 5CNN 5CHNN 7.5CNN 7.5CHNN 10CNN 10CHNN 15CNN 15CHNN 20CNN 20CHNN 1/2CLNN 1CL 1CLH 2CL 2CLH 2.8CL 2.8CLH 3CL 3CLH 5CLNN
NN NN NN NN NN NN NN NN

Lifting Height (m) 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 Lifting Height (m) 6 12 Lifting Height (m) 6 6 12 6 12 6 12 6 12 6

0.17 0.17 0.13 0.13 0.13 0.12 0.083 0.075 0.075 0.075 0.17 0.17 0.13 0.13 0.13 0.12
Hoist Lifting 50Hz Hoist Lifting 50Hz Hoist Lifting 50Hz
(10) (10) (7.5) (7.5) (7.5) (7) (5) (4.5) (4.5) (4.5) (10) (10) (7.5) (7.5) (7.5) (7)
Speed Speed Speed
0.20 0.20 0.15 0.15 0.15 0.14 0.10 0.092 0.092 0.092 0.20 0.20 0.15 0.15 0.15 0.14
m/s (m/min) 60Hz m/s (m/min) 60Hz m/s (m/min) 60Hz
(12) (12) (9) (9) (9) (8.4) (6) (5.5) (5.5) (5.5) (12) (12) (9) (9) (9) (8.4)
H H H
o kW 1.5 2.6 3.7 5.3 5.5 9 11 11 18.5 o kW 22 o kW 1.5 2.6 3.7 5.3 5.5 9
i Hoist Motor i Hoist Motor i Hoist Motor
s s s
t Pole 4 4 4 4 4 4 6 6 4 t Pole 4 t Pole 4 4 4 4 4 4
Rated 200V 50Hz 7.0 11.5 16 24 24 34 48 48 68 Rated 200V 50Hz 86 Rated 200V 50Hz 7.0 11.5 16 24 24 34
Current 200V 60Hz 6.6 11.5 16 24 24 34 48 48 68 Current 200V 60Hz 86 Current 200V 60Hz 6.6 11.5 16 24 24 34
(A) 220V 60Hz 6.6 10.5 15 23 23 32 46 46 64 (A) 220V 60Hz 82 (A) 220V 60Hz 6.6 10.5 15 23 23 32
0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.31 0.31 0.31 0.35 0.35 0.35 0.35 0.35 0.35
Trolley 50Hz Trolley 50Hz Trolley 50Hz
(21) (21) (21) (21) (21) (21) (21) (18.5) (18.5) (18.5) (21) (21) (21) (21) (21) (21)
Speed Speed Speed
0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.37 0.37 0.37 0.42 0.42 0.42 0.42 0.42 0.42
T m/s (m/min) 60Hz T m/s (m/min) 60Hz T m/s (m/min) 60Hz
(25) (25) (25) (25) (25) (25) (25) (22) (22) (22) (25) (25) (25) (25) (25) (25)
r r r
o kW 0.2 0.2 0.4 0.4 0.4 0.75 2×0.4 2×0.4 2×0.75 o kW 2×0.75 o kW 0.2 0.2 0.4 0.4 0.4 0.75
l Trolley l Trolley l Trolley
l Motor l Motor l Motor
e Pole 4 4 4 4 4 4 4 4 4 e Pole 4 e Pole 4 4 4 4 4 4
y y y
Rated 200V 50Hz 1.24 1.24 2.35 2.35 2.35 3.88 2×2.35 2×2.35 2×3.88 Rated 200V 50Hz 2×3.88 Rated 200V 50Hz 1.24 1.24 2.35 2.35 2.35 3.88
Current 200V 60Hz 1.09 1.09 2.05 2.05 2.05 3.43 2×2.05 2×2.05 2×3.43 Current 200V 60Hz 2×3.43 Current 200V 60Hz 1.09 1.09 2.05 2.05 2.05 3.43
(A) 220V 60Hz 1.09 1.09 2.02 2.02 2.02 3.35 2×2.02 2×2.02 2×3.35 (A) 220V 60Hz 2×3.35 (A) 220V 60Hz 1.09 1.09 2.02 2.02 2.02 3.35
Falls 2 2 2 2 2 2 4 4 4 Falls 4 Falls 4 4 4 4 4 4
Wire Rope Construction 6×W (19) 6×Fi (29) Wire Rope Construction 6×Fi (29) Wire Rope Construction 6×W (19) 6×Fi (29)
Dia (mm) 5 8 10 12.5 12.5 16 14 16 20 Dia (mm) 22.4 Dia (mm) 4 5 8 9 9 11.2
L 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 L 6000 12000 L 6000 6000 12000 6000 12000 6000 12000 6000 12000 6000
H 680 680 750 750 920 920 1080 1080 1080 1080 1300 1300 1210 1210 1430 1430 1650 1650 H 1750 1750 H 380 450 450 550 550 650 650 650 650 800
A 335 405 370 445 430 500 470 560 470 560 560 660 710 910 780 955 935 1135 A 1010 1235 A 405 435 570 520 660 560 705 560 705 660
B 325 395 415 540 420 530 465 555 465 555 600 700 800 1000 785 960 875 1075 B 975 1200 B 395 480 615 510 650 555 700 555 700 700
E 355 355 355 355 390 390 390 390 390 390 495 495 430 430 440 440 535 535 E 535 535 E 355 355 355 390 390 390 390 390 390 495
Approx. Dimensions F 330 330 330 330 365 365 415 415 415 415 475 475 550 550 690 690 750 750 Approx. Dimensions F 770 770 Approx. Dimensions C 280 350 350 385 385 410 410 410 410 500
(mm) K1 40 75 50 125 50 100 55 105 55 105 65 120 (mm) K1
(mm) D 310 320 320 400 400 440 440 440 440 530
K2 40 70 50 75 45 75 50 90 50 90 50 100 K2 W 190 190 190 230 230 230 230 230 230 280
W 190 190 190 190 230 230 230 230 230 230 280 280 500 500 450 450 600 600 W 750 1200 M 130 130 130 155 155 155 155 155 155 180
M 130 130 130 130 155 155 155 155 155 155 180 180 176 176 176 176 224 224 M 224 224 N φ80 φ80 φ80 φ100 φ100 φ100 φ100 φ100 φ100 φ130
N φ80 φ80 φ80 φ80 φ100 φ100 φ100 φ100 φ100 φ100 φ130 φ130 φ150 φ150 φ150 φ150 φ200 φ200 N φ200 φ200 Q 66 66 66 50 50 50 50 50 50 74
Q 66 66 66 66 50 50 50 50 50 50 74 74 73 73 81 81 72 72 Q 72 72 T 55 75 75 105 105 110 110 110 110 125
S 0 0 0 25 0 20 0 0 0 0 Approx. weight (kg) 150 200 230 360 420 430 480 430 480 720
Approx. weight (kg) 140 160 170 190 310 360 370 420 370 420 650 690 800 900 1300 1450 2000 2150 Approx. weight (kg) 2150 2300
Min. Radius 4mR 3mR 4.5mR
Min. Radius 4mR 3mR 4.5mR Straight track Straight track Straight track Min. Radius Straight track
Standard I beam width (mm) 125 150
Standard I beam width (mm) 125 150 175 Standard I beam width (mm) 175
※Dimensions E and Q vary with the rail width.
※Dimensions E and Q vary with the rail width. ※Dimensions E and Q vary with the rail width. ※Please contact us about your requested curve radius.
※Please contact us about your requested curve radius. ※Please contact us about your requested curve radius.

3 4
 Double rail type • Motor trolley hoist

R-TYPE INVERTER HOIST

■ Standard Specification
Rail
head Three-phase 200V 50Hz/60Hz, 220V 60Hz, 380V
Rail Power source
head 50Hz (380V · 400V 50Hz, 400V · 440V 60Hz)
Pendant control unit for floor-operation (two-step
Control
push-in method)
Duty rating 40%ED
Y or more
Service temperature From –10°C to +40°C
Humidity 90%RH (not to condense dew)
Gauge Span R
Atmosphere Free from corrosive gas, low dust level
Control method Inverter drive
2.8t∼20t 30t Cable power feeding
Power Hoist-up inverter can be supplied from trolley
feeding (tandem collector)
method However, momentary power failure of over 10
msec should not occur
●Specification
Protective structure Dustproof type
Rated Load 2.8t 3t 5t 7.5t 10t 15t 20t 30t Pertinent JIS C 9620 (Electric Hoists) and Japanese
standards Construction Codes for Crane

Model
RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- ■ Hoist Class, ED Rate and Starting Frequency
2.8CDNN 2.8CDHNN 3CDNN 3CDHNN 5CDNN 5CDHNN 7.5CDNN 7.5CDHNN 10CDNN 10CDHNN 15CDNN 15CDHNN 20CDNN 20CDHNN 30CDNN 30CDHNN STARTING
TYPE CLASS ED RATIO FREQUENCY
(%ED) (Time/hour)
R D 40 240
Lifting Height (m) 6 12 6 12 8 12 8 12 8 12 8 12 8 12 8 12
• Hoist with creep speed (Ex. RMT-1CT and same series)
Hoist class is same class D.
0.13 0.13 0.12 0.083 0.075 0.075 0.075 0.037 But duty rating is 25% ED and starting frequency is 200 times per hour.
Hoist Lifting 50Hz
(7.5) (7.5) (7) (5) (4.5) (4.5) (4.5) (2.2)
Speed
m/s (m/min) 60Hz
0.15
(9)
0.15
(9)
0.14
(8.4)
0.10
(6)
0.092
(5.5)
0.092
(5.5)
0.092
(5.5)
0.045
(2.7)
■ Special Features
H ● The
o kW 5.3 5.5 9 11 11 18.5 22 18.5
most suitable speed can be selected. ● Safety design of the built-in protection circuit.
i Hoist Motor The winding UP/DOWN speed can be set in the range of Many protection circuits are built in and so very safety for
s
t Pole 4 4 4 6 6 4 4 4 1-1/10 speed ratio. various abnormality.
Rated 200V 50Hz 24 24 34 48 48 68 86 68 The painting and galvernizing line works can be made at Also, the digital operator showing the contents of
Current 200V 60Hz 24 24 34 48 48 68 86 68 the most suitable speed and so the uniformalization of the damages can make quick maintenance.
(A) 220V 60Hz 23 23 32 46 46 64 82 64
0.35 0.35 0.35 0.35 0.31 0.31 0.31 0.31 products can be achieved. ● Small electric power.
Trolley 50Hz ● Small shock to the load.
(21) (21) (21) (21) (18.5) (18.5) (18.5) (18.5) Inverter output suitable for motor by sensorless vector
Speed
m/s (m/min) 60Hz
0.42 0.42 0.42 0.42 0.37 0.37 0.37 0.37 ※In case of free run stop (Standard) control. control and so no excess current at the time of low speed.
T (25) (25) (25) (25) (22) (22) (22) (22)
r Smooth start and no shock at the time of speed change. ※In case of standard model, the inverter control is only for winding up.
o kW 0.4 0.4 0.75 0.75 0.75 1.5 1.5 2×1.5 ※In case of the speed reducing stop (Semi standard) control. Regarding the inverter control of travelling and (winding up +
l Trolley
l Motor Smooth start and stop and no shock. Also, no shock at the time travelling), please consult with us.
e Pole 4 4 4 4 4 4 4 4 of speed change.
y
※As option, the load limiter function and the right load speed up
Rated 200V 50Hz 2.35 2.35 3.88 3.88 3.88 6.97 6.97 2×6.97 function are prepared.
Current 200V 60Hz 2.05 2.05 3.43 3.43 3.43 6.29 6.29 2×6.29
Also, small electric power by small starting current at the
(A) 220V 60Hz 2.02 2.02 3.35 3.35 3.35 6.00 6.00 2×6.00
time of start compared with commercial use.
■ Operation Pattern
Falls 4 4 4 4 4 4 4 8
Wire Rope Construction 6×Fi (29)
Dia (mm) 9 9 11.2 14 16 20 22.4 20
L
H
6000
450
12000
450
6000
450
12000
450
8000 12000
540 540
8000
660
12000
660
8000
680
12000
680
8000
800
12000
800
8000 12000
950 950
8000
1450
12000
1450
FREE RUN STOP (STANDARD) SPEED REDUCING STOP (SEMI STANDARD) ■ Inverter
The inverter converts 3 phase
A 560 705 560 705 710 810 810 910 830 955 1010 1135 1135 1235 1315 1515
●In case of Low speed operation ●In case of Low speed operation Alternating current voltage to Direct
B 555 700 555 700 750 850 900 1000 835 960 950 1075 1100 1200 1250 1450 Acceleration Speed reducing
C 555 700 555 700 715 815 1465 1665
Acceleration Speed reducing
current voltage by the diode bridge and
E 780 780 780 780 930 930 950 950 1230 1230 1250 1250 1250 1250 1815 1815 Low speed Low speed change the rotation speed of the electric
K 380 380 380 380 440 440 470 470 630 630 680 680 680 680 1150 1150 Push button is Push button is motor through the variable controlling of
pushed down state Release 1st stage Release pushed down state Release 1st stage Release
Approx. Dimensions W 600 600 600 600 750 750 750 750 950 950 1000 1000 1000 1000 1300 1300 the frequency of the voltage to be
(mm) J 200 200 200 200 225 225 225 225 225 225 260 260 280 280 ●In case of High speed operation ●In case of High speed operation Speed reducing
charged to the power transistor with the
T 450 450 450 450 535 535 540 540 665 665 690 690 690 690 Acceleration Acceleration
micro computer (CPU).
R 650 900 650 900 900 1150 1150 1300 900 1150 1150 1400 1400 1600 1800 2200 High speed High speed
Change the frequency in order to
Y 400 700 400 700 560 760 750 950 600 850 790 1040 1040 1240 change the rotation speed of the
M 45 45 45 45 45 45 45 45 45 45 56 56 56 56 80 80 Push button is Push button is induction electric motor.
G 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 pushed down state Release 2nd stage Release pushed down state Release 2nd stage Release

N1 φ150 φ150 φ150 φ150 φ150 φ150 φ150 φ150 φ200 φ200 φ200 φ200 φ200 φ200 φ300 φ300 FORMULA TO FIGURE OUT THE NUMBER OF ROTATION
●In case of Low/High speed change operation ●In case of Low/High speed change operation
N2 φ178 φ178 φ178 φ178 φ178 φ178 φ178 φ178 φ230 φ230 φ230 φ230 φ230 φ230 φ340 φ340 Speed reducing Acceleration Speed reducing
Acceleration
Acceleration Acceleration
Speed reducing
Approx. weight (kg) 430 480 430 480 720 780 850 900 1400 1550 2100 2200 2250 2350 3800 4050 High speed
Speed reducing
High speed N=(120 F/P) (1-S)
Low speed Low speed
N: Rotation speed (rpm)
Push button is Push button is
pushed down state Release 1st stage 2nd stage 1st stage Release pushed down state Release 1st stage 2nd stage 1st stage Release
F: Frequency (Hz)
P: Number of pole
※In case of speed reducing operation, the operation is continued due to reducing the speed by the inverter after releasing the push button. S: Slip (%)
※The above speed reducing stop is standard for travelling.

5 6
 Ordinary type • Motor trolley hoist Low headroom type • Motor trolley hoist

Lower
Lower Lower flange
flange flange Lower
flange

500kg∼5t 7.5t∼15t 20t 500kg∼5t

●Specification ●Specification ●Specification

Rated Load 500kg 1t 2t 2.8t 3t 5t 7.5t 10t 15t Rated Load 20t Rated Load 500kg 1t 2t 2.8t 3t 5t

RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT-
RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT-
Model Model Model 1/2 1 1 2 2 2.8 2.8 3 3 5
1/2CVN 1/2CHVN 1CVN 1CHVN 2CVN 2CHVN 2.8CVN 2.8CHVN 3CVN 3CHVN 5CVN 5CHVN 7.5CVN 7.5CHVN 10CVN 10CHVN 15CVN 15CHVN 20CVN 20CHVN
CLVN CLVN CLHVN CLVN CLHVN CLVN CLHVN CLVN CLHVN CLVN

Lifting Height (m) 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 Lifting Height (m) 6 12 Lifting Height (m) 6 6 12 6 12 6 12 6 12 6

0.017-0.17 0.017-0.17 0.013-0.13 0.013-0.13 0.013-0.13 0.012-0.12 0.0083-0.083 0.0067-0.075 0.0067-0.075 0.0067-0.075 0.017-0.17 0.017-0.17 0.013-0.13 0.013-0.13 0.013-0.13 0.012-0.12
Hoist Lifting 50Hz Hoist Lifting 50Hz Hoist Lifting 50Hz
(1.0-10) (1.0-10) (0.8-7.5) (0.8-7.5) (0.8-7.5) (0.7-7) (0.5-5) (0.4-4.5) (0.4-4.5) (0.4-4.5) (1.0-10) (1.0-10) (0.8-7.5) (0.8-7.5) (0.8-7.5) (0.7-7)
Speed Speed Speed
0.020-0.20 0.020-0.20 0.015-0.15 0.015-0.15 0.015-0.15 0.013-0.14 0.010-0.10 0.0083-0.092 0.0083-0.092 0.0083-0.092 0.020-0.20 0.020-0.20 0.015-0.15 0.015-0.15 0.015-0.15 0.013-0.14
m/s (m/min) 60Hz m/s (m/min) 60Hz m/s (m/min) 60Hz
(1.2-12) (1.2-12) (0.9-9) (0.9-9) (0.9-9) (0.8-8.4) (0.6-6) (0.5-5.5) (0.5-5.5) (0.5-5.5) (1.2-12) (1.2-12) (0.9-9) (0.9-9) (0.9-9) (0.8-8.4)
H H H
o kW 1.5 2.6 3.7 5.3 5.5 9 11 11 18.5 o kW 22 o kW 1.5 2.6 3.7 5.3 5.5 9
i Hoist Motor i Hoist Motor i Hoist Motor
s s s
t Pole 4 4 4 4 4 4 6 6 4 t Pole 4 t Pole 4 4 4 4 4 4
Rated 200V 50Hz 7.0 11.5 16.0 24 24 34 48 48 68 Rated 200V 50Hz 86 Rated 200V 50Hz 7.0 11.5 16 24 24 34
Current 200V 60Hz 6.6 11.5 16.0 24 24 34 48 48 68 Current 200V 60Hz 86 Current 200V 60Hz 6.6 11.5 16 24 24 34
(A) 220V 60Hz 6.6 10.5 15.0 23 23 32 46 46 64 (A) 220V 60Hz 82 (A) 220V 60Hz 6.6 10.5 15 23 23 32
0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.31 0.31 0.31 0.35 0.35 0.35 0.35 0.35 0.35
Trolley 50Hz Trolley 50Hz Trolley 50Hz
(21) (21) (21) (21) (21) (21) (21) (18.5) (18.5) (18.5) (21) (21) (21) (21) (21) (21)
Speed Speed Speed
0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.37 0.37 0.37 0.42 0.42 0.42 0.42 0.42 0.42
T m/s (m/min) 60Hz T m/s (m/min) 60Hz T m/s (m/min) 60Hz
(25) (25) (25) (25) (25) (25) (25) (22) (22) (22) (25) (25) (25) (25) (25) (25)
r r r
o kW 0.2 0.2 0.4 0.4 0.4 0.75 2×0.4 2××0.4 2×0.75 o kW 2×0.75 o kW 0.2 0.2 0.4 0.4 0.4 0.75
l Trolley l Trolley l Trolley
l Motor l Motor l Motor
e Pole 4 4 4 4 4 4 4 4 4 e Pole 4 e Pole 4 4 4 4 4 4
y y y
Rated 200V 50Hz 1.24 1.24 2.35 2.35 2.35 3.88 2×2.35 2×2.35 2×3.88 Rated 200V 50Hz 2×3.88 Rated 200V 50Hz 1.24 1.24 2.35 2.35 2.35 3.88
Current 200V 60Hz 1.09 1.09 2.05 2.05 2.05 3.43 2×2.05 2×2.05 2×3.43 Current 200V 60Hz 2×3.43 Current 200V 60Hz 1.09 1.09 2.05 2.05 2.05 3.43
(A) 220V 60Hz 1.09 1.09 2.02 2.02 2.02 3.35 2×2.02 2×2.02 2×3.35 (A) 220V 60Hz 2×3.35 (A) 220V 60Hz 1.09 1.09 2.02 2.02 2.02 3.35
Falls 2 2 2 2 2 2 4 4 4 Falls 4 Falls 4 4 4 4 4 4
Wire Rope Construction 6×W (19) 6×Fi (29) Wire Rope Construction 6×Fi (29) Wire Rope Construction 6×W (19) 6×Fi (29)
Dia (mm) 5 8 10 12.5 12.5 16 14 16 20 Dia (mm) 22.4 Dia (mm) 4 5 8 9 9 11.2
L 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 L 6000 12000 L 6000 6000 12000 6000 12000 6000 12000 6000 12000 6000
H 680 680 750 750 920 920 1080 1080 1080 1080 1300 1300 1210 1210 1430 1430 1650 1650 H 1750 1750 H 380 450 450 550 550 650 650 650 650 800
A 335 405 370 445 430 500 470 560 470 560 560 660 710 910 780 955 935 1135 A 1010 1235 A 405 435 570 520 660 560 705 560 705 660
B 580 580 580 580 580 580 580 580 580 580 600 700 800 1000 785 960 875 1075 B 975 1200 B 395 480 615 510 650 555 700 555 700 700
E 355 355 355 355 390 390 390 390 390 390 495 495 430 430 440 440 535 535 E 535 535 E 355 355 355 390 390 390 390 390 390 495
F 360 360 360 360 395 395 420 420 420 420 475 475 550 550 690 690 750 750 F 770 770 C 340 380 420 430 430 530
Approx. Dimensions F' Approx. Dimensions F' Approx. Dimensions
590 590 670 670 740 740 800 800 D 510 510 570 670 670 810
(mm) (mm) (mm)
K1 40 75 50 125 50 100 55 105 55 105 65 120 K1 W 190 190 190 230 230 230 230 230 230 280
K2 40 70 50 75 45 75 50 90 50 90 50 100 K2 M 130 130 130 155 155 155 155 155 155 180
W 190 190 190 190 230 230 230 230 230 230 280 280 500 500 450 450 600 600 W 750 1200 N φ80 φ80 φ80 φ100 φ100 φ100 φ100 φ100 φ100 φ130
M 130 130 130 130 155 155 155 155 155 155 180 180 176 176 176 176 224 224 M 224 224 Q 66 66 66 50 50 50 50 50 50 74
N φ80 φ80 φ80 φ80 φ100 φ100 φ100 φ100 φ100 φ100 φ130 φ130 φ150 φ150 φ150 φ150 φ200 φ200 N φ200 φ200 T 55 75 75 105 105 110 110 110 110 125
Q 66 66 66 66 50 50 50 50 50 50 74 74 73 73 81 81 72 72 Q 72 72
S 0 0 0 25 0 20 0 0 0 0 Approx. weight (kg) 170 220 250 390 450 460 510 460 510 770
Approx. weight (kg) 170 180 190 210 340 400 400 450 400 450 730 770 850 950 1450 1600 2150 2300 Approx. weight (kg) 2300 2450
Min. Radius 4mR 3mR 4.5mR
Min. Radius 4mR 3mR 4.5mR Straight track Straight track Straight track Min. Radius Straight track
Standard I beam width (mm) 125 150
Standard I beam width (mm) 125 150 175 Standard I beam width (mm) 175
※Dimensions E and Q vary with the rail width.
※Dimensions E and Q vary with the rail width. ※Dimensions E and Q vary with the rail width. ※Please contact us about your requested curve radius.
※Please contact us about your requested curve radius. ※Please contact us about your requested curve radius.

7 8
 Creep speed
Double rail type • Motor trolley hoist Ordinary type • Motor trolley hoist

Lower flange Lower flange

Rail
head

Y or more

2.8t∼20t 1t∼5t 7.5t∼15t

●Specification ●Specification

Rated Load 2.8t 3t 5t 7.5t 10t 15t 20t Rated Load 1t 2t 2.8t 3t 5t 7.5t 10t 15t

RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT-
Model Model
2.8CDVN 2.8CDHVN 3CDVN 3CDHVN 5CDVN 5CDHVN 7.5CDVN 7.5CDHVN 10CDVN 10CDHVN 15CDVN 15CDHVN 20CDVN 20CDHVN 1CTN 1CHTN 2CTN 2CHTN 2.8CTN 2.8CHTN 3CTN 3CHTN 5CTN 5CHTN 7.5CTN 7.5CHTN 10CTN 10CHTN 15CTN 15CHTN

Lifting Height (m) 6 12 6 12 8 12 8 12 8 12 8 12 8 12 Lifting Height (m) 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12

0.013-0.13 0.013-0.13 0.012-0.12 0.0083-0.083 0.0067-0.075 0.0067-0.075 0.0067-0.075 S

t 0.17 0.13 0.13 0.13 0.12 0.083 0.075 0.075
Hoist Lifting 50Hz a Hoist Lifting 50Hz
(0.8-7.5) (0.8-7.5) (0.7-7) (0.5-5) (0.4-4.5) (0.4-4.5) (0.4-4.5) n (10) (7.5) (7.5) (7.5) (7) (5) (4.5) (4.5)
Speed d Speed
0.015-0.15 0.015-0.15 0.013-0.14 0.010-0.10 0.0083-0.092 0.0083-0.092 0.0083-0.092 a 0.20 0.15 0.15 0.15 0.14 0.10 0.092 0.092
m/s (m/min) 60Hz r
d m/s (m/min) 60Hz
(0.9-9) (0.9-9) (0.8-8.4) (0.6-6) (0.5-5.5) (0.5-5.5) (0.5-5.5) (12) (9) (9) (9) (8.4) (6) (5.5) (5.5)
H S
p
o kW 5.3 5.5 9 11 11 18.5 22 e
e Hoist Motor kW 2.6 3.7 5.3 5.5 9 11 11 18.5
i Hoist Motor
d
s C 0.017 0.013 0.013 0.013 0.012 0.0083 0.0075 0.0075
t Pole 4 4 4 6 6 4 4 r Hoist Lifting 50Hz
e (1.0) (0.75) (0.75) (0.75) (0.7) (0.5) (0.45) (0.45)
e Speed
Rated 200V 50Hz 24 24 34 48 48 68 86 p 0.020 0.015 0.015 0.015 0.014 0.010 0.0092 0.0092
m/s (m/min) 60Hz
Current 200V 60Hz 24 24 34 48 48 68 86 S
p
(1.2) (0.9) (0.9) (0.9) (0.84) (0.6) (0.55) (0.55)
(A) 220V 60Hz 23 23 32 46 46 64 82 e
e Hoist Motor kW 0.75 0.75 0.75 0.75 1.5 1.1 1.8 2.6
0.35 0.35 0.35 0.35 0.31 0.31 0.31 d
Trolley 50Hz
(21) (21) (21) (21) (18.5) (18.5) (18.5) T
0.35 0.35 0.35 0.35 0.35 0.35 0.31 0.31
Speed Trolley 50Hz
0.42 0.42 0.42 0.42 0.37 0.37 0.37 r (21) (21) (21) (21) (21) (21) (18.5) (18.5)
T m/s (m/min) 60Hz o Speed
(25) (25) (25) (25) (22) (22) (22) 0.42 0.42 0.42 0.42 0.42 0.42 0.37 0.37
r l m/s (m/min) 60Hz
o l (25) (25) (25) (25) (25) (25) (22) (22)
kW 0.4 0.4 0.75 0.75 0.75 1.5 1.5 e
l Trolley
l y Hoist Motor kW 0.2 0.4 0.4 0.4 0.75 2×0.4 2×0.4 2×0.75
Motor
e Pole 4 4 4 4 4 4 4
Falls 2 2 2 2 2 4 4 4
y
Rated 200V 50Hz 2.35 2.35 3.88 3.88 3.88 6.97 6.97 Wire Rope Construction 6×Fi (29)
Current 200V 60Hz 2.05 2.05 3.43 3.43 3.43 6.29 6.29 Dia (mm) 8 10 12.5 12.5 16 14 16 20
(A) 220V 60Hz 2.02 2.02 3.35 3.35 3.35 6.00 6.00 L 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000
Falls 4 4 4 4 4 4 4 H 750 750 920 920 1080 1080 1080 1080 1300 1300 1210 1210 1430 1430 1650 1650
Wire Rope Construction 6×Fi (29) A 370 445 430 500 470 560 470 560 560 660 710 910 780 955 935 1135
Dia (mm) 9 9 11.2 14 16 20 22.4 B 510 635 530 640 525 615 525 615 680 780 880 1080 865 1040 955 1155
L 6000 12000 6000 12000 8000 12000 8000 12000 8000 12000 8000 12000 8000 12000 E 355 355 390 390 390 390 390 390 495 495 430 430 440 440 535 535
H 450 450 450 450 540 540 660 660 680 680 800 800 950 950 F1 370 370 405 405 425 425 425 425 500 500 575 575 720 720 770 770
A 560 705 560 705 710 810 810 910 830 955 1010 1135 1135 1235 Approx. Dimensions F2 385 385 440 440 440 440 440 440 510 510 540 540 550 550 560 560
B 555 700 555 700 750 850 900 1000 835 960 950 1075 1100 1200 K1 50 125 50 100 55 105 55 105 65 120
(mm)
C 555 700 555 700 715 815 K2 50 75 45 75 50 90 50 90 50 100
E 780 780 780 780 930 930 950 950 1230 1230 1250 1250 1250 1250 W 190 190 230 230 230 230 230 230 280 280 500 500 450 450 600 600
K 480 480 480 480 650 650 650 650 700 700 850 850 1000 1000 M 130 130 155 155 155 155 155 155 180 180 176 176 176 176 224 224
600 600 600 600 750 750 750 750 950 950 1000 1000 1000 1000 N φ80 φ80 φ100 φ100 φ100 φ100 φ100 φ100 φ130 φ130 φ150 φ150 φ150 φ150 φ200 φ200
Approx. Dimensions W
J1 200 200 200 200 225 225 225 225 225 225 260 260 280 280 Q 66 66 50 50 50 50 50 50 74 74 73 73 81 81 72 72
(mm)
J2 220 220 280 280 280 310 370 S 0 25 0 20 0 0 0 0
T 450 450 450 450 535 535 540 540 665 665 690 690 690 690 Approx. weight (kg) 210 260 360 440 450 530 450 530 830 870 950 1050 1450 1600 2200 2350
R 650 900 650 900 900 1150 1150 1300 900 1150 1150 1400 1400 1600
Y 400 700 400 700 560 760 750 950 600 850 790 1040 1040 1240
Min. Radius 4mR 3mR 4.5mR Straight track Straight track Straight track
M 45 45 45 45 45 45 45 45 45 45 56 56 56 56
G 15 15 15 15 20 20 20 20 20 20 20 20 20 20
Standard I beam width (mm) 125 150 175
N1 φ150 φ150 φ150 φ150 φ150 φ150 φ150 φ150 φ200 φ200 φ200 φ200 φ200 φ200
N2 φ178 φ178 φ178 φ178 φ178 φ178 φ178 φ178 φ230 φ230 φ230 φ230 φ230 φ230 ※Dimensions E and Q vary with the rail width.
Approx. weight (kg) 450 500 450 500 770 830 950 1000 1550 1700 2250 2350 2400 2500 ※Please contact us about your requested curve radius.

9 10
 Creep speed Creep speed
Low headroom type ・Motor trolley hoist Double rail type ・Motor trolley hoist

Lower Lower flange

flange
Rail
head
Rail
head

Y or more

Gauge Span R

20t 1t∼5t 2.8t∼20t 30t

●Specification ●Specification ●Specification

Rated Load 20t Rated Load 1t 2t 2.8t 3t 5t Rated Load 2.8t 3t 5t 7.5t 10t 15t 20t 30t

RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT-

RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT- RMT-
Model Model 1 1 2 2 2.8 2.8 3 3 Model
20CTN 20CHTN 5CLTN 2.8CDTN 2.8CDHTN 3CDTN 3CDHTN 5CDTN 5CDHTN 7.5CDTN 7.5CDHTN 10CDTN 10CDHTN 15CDTN 15CDHTN 20CDTN 20CDHTN 30CDTN 30CDHTN
CLTN CLHTN CLTN CLHTN CLTN CLHTN CLTN CLHTN

Lifting Height (m) 6 12 Lifting Height (m) 6 12 6 12 6 12 6 12 6 Lifting Height (m) 6 12 6 12 8 12 8 12 8 12 8 12 8 12 8 12

S
t 0.075 S
t
0.17 0.13 0.13 0.13 0.12 S 0.13 0.13 0.12 0.083 0.075 0.075 0.075 0.037
a Hoist Lifting 50Hz a Hoist Lifting 50Hz t
a Hoist Lifting 50Hz
n (4.5) n (10) (7.5) (7.5) (7.5) (7) n (7.5) (7.5) (7) (5) (4.5) (4.5) (4.5) (2.2)
d Speed d Speed d Speed
a 0.092 a 0.20 0.15 0.15 0.15 0.14 a 0.15 0.15 0.14 0.10 0.092 0.092 0.092 0.045
r
d m/s (m/min) 60Hz r
d m/s (m/min) 60Hz r m/s (m/min) 60Hz
S
(5.5) S
(12) (9) (9) (9) (8.4) d
(9) (9) (8.4) (6) (5.5) (5.5) (5.5) (2.7)
S
p p p
e
e Hoist Motor kW 22 e
e Hoist Motor kW 2.6 3.7 5.3 5.5 9 e
e Hoist Motor kW 5.3 5.5 9 11 11 18.5 22 18.5
d d d
C 0.0075 C 0.017 0.013 0.013 0.013 0.012 C 0.013 0.013 0.012 0.0083 0.0075 0.0075 0.0075 0.0037
r Hoist Lifting 50Hz r Hoist Lifting 50Hz r Hoist Lifting 50Hz
e (0.45) e (1.0) (0.75) (0.75) (0.75) (0.7) e (0.75) (0.75) (0.7) (0.5) (0.45) (0.45) (0.45) (0.22)
e Speed e Speed e Speed
p 0.0092 p 0.020 0.015 0.015 0.015 0.014 p 0.015 0.015 0.014 0.010 0.0092 0.0092 0.0092 0.0045
m/s (m/min) 60Hz m/s (m/min) 60Hz m/s (m/min) 60Hz
S (0.55) S (1.2) (0.9) (0.9) (0.9) (0.84) S (0.9) (0.9) (0.84) (0.6) (0.55) (0.55) (0.55) (0.27)
p p p
e e e
e Hoist Motor kW 2.6 e Hoist Motor kW 0.75 0.75 0.75 0.75 1.5 e Hoist Motor kW 0.75 0.75 1.5 1.1 1.8 2.6 2.6 2.6
d d d

T
0.31 T
0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.31 0.31 0.31 0.31
Trolley 50Hz Trolley 50Hz T Trolley 50Hz
r (18.5) r (21) (21) (21) (21) (21) r (21) (21) (21) (21) (18.5) (18.5) (18.5) (18.5)
o Speed o Speed Speed
0.37 0.42 0.42 0.42 0.42 0.42 o 0.42 0.42 0.42 0.42 0.37 0.37 0.37 0.37
l m/s (m/min) 60Hz l m/s (m/min) 60Hz l m/s (m/min) 60Hz
l (22) l (25) (25) (25) (25) (25) l (25) (25) (25) (25) (22) (22) (22) (22)
e e e
y Hoist Motor kW 2×0.75 y Hoist Motor kW 0.2 0.4 0.4 0.4 0.75 y Hoist Motor kW 0.4 0.4 0.75 0.75 0.75 1.5 1.5 2×1.5
Falls 4 Falls 4 4 4 4 4 Falls 4 4 4 4 4 4 4 8
Wire Rope Construction 6×Fi (29) Wire Rope Construction 6×W (19) 6×Fi (29) Wire Rope Construction 6×Fi (29)
Dia (mm) 22.4 Dia (mm) 5 8 9 9 11.2 Dia (mm) 9 9 11.2 14 16 20 22.4 20
L 6000 12000 L 6000 12000 6000 12000 6000 12000 6000 12000 6000 L 6000 12000 6000 12000 8000 12000 8000 12000 8000 12000 8000 12000 8000 12000 8000 12000
H 1750 1750 H 450 450 550 550 650 650 650 650 800 H 450 450 450 450 540 540 660 660 680 680 800 800 950 950 1450 1450
A 1010 1235 A 435 570 520 660 560 705 560 705 660 A 560 705 560 705 710 810 810 910 830 955 1010 1135 1135 1235 1315 1515
B 1055 1280 B 575 710 620 760 615 760 615 760 780 B 615 760 615 760 830 930 980 1080 915 1040 1030 1155 1180 1280 1330 1530
E 535 535 E 355 355 390 390 390 390 390 390 495 C 555 700 555 700 715 815 1465 1665
Approx. Dimensions F1 790 790 Approx. Dimensions Q 66 66 50 50 50 50 50 50 74 E 780 780 780 780 930 930 950 950 1230 1230 1250 1250 1250 1250 1815 1815
(mm) F2 560 560 (mm) D1 320 320 400 400 440 440 440 440 530 K1 460 460 460 460 470 470 470 470 630 630 680 680 680 680 1150 1150
K1 D2 355 355 425 425 495 495 495 495 585 K2 420 420 420 420 505 505 520 520
K2 W 190 190 230 230 230 230 230 230 280 Approx. Dimensions W 600 600 600 600 750 750 750 750 950 950 1000 1000 1000 1000 1300 1300
W 750 1200 M 130 130 155 155 155 155 155 155 180 (mm) J1 200 200 200 200 250 250 260 260 260 260 285 285 300 300
M 224 224 N φ80 φ80 φ100 φ100 φ100 φ100 φ100 φ100 φ130 J2 25 25 15 15
N φ200 φ200 C 390 390 420 420 420 420 420 420 550 T 450 450 450 450 535 535 540 540 665 665 690 690 690 690
Q 72 72 T 75 75 105 105 110 110 110 110 125 R 650 900 650 900 900 1150 1150 1300 900 1150 1150 1400 1400 1600 1800 2200
Approx. weight (kg) 2350 2500 Approx. weight (kg) 290 340 450 530 540 600 540 600 900 Y 400 700 400 700 560 760 750 950 600 850 790 1040 1040 1240
M 45 45 45 45 45 45 45 45 45 45 56 56 56 56 80 80
Min. Radius Straight track Min. Radius 4mR 3mR 4.5mR G 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20
N1 φ150 φ150 φ150 φ150 φ150 φ150 φ150 φ150 φ200 φ200 φ200 φ200 φ200 φ200 φ300 φ300
Standard I beam width (mm) 175 Standard I beam width (mm) 125 150 N2 φ178 φ178 φ178 φ178 φ178 φ178 φ178 φ178 φ230 φ230 φ230 φ230 φ230 φ230 φ340 φ340
Approx. weight (kg) 500 550 500 550 900 960 1000 1050 1550 1700 2300 2400 2450 2550 4000 4250
※Dimensions E and Q vary with the rail width. ※Dimensions E and Q vary with the rail width.
※Please contact us about your requested curve radius. ※Please contact us about your requested curve radius.

11 12
 Ordinary type • Suspended KAMIUCHI HOIST SERIES APPLICABLE FOR ALL APPLICATION
Kamiuchi prepare so many and abundant hoist series that each customer can select according to their application.
Please make the best use of Kamiuchi hoists, being proud of the outstanding actual sales and reliability, for
rationalization and energy saving of transportation works and improvement of operation efficiency.

S-TYPE HOIST series K-TYPE HOIST series

（1t∼3t） （500kg∼60t）

Hoist of handy type and Hoist of high reliability

500kg∼5t 7.5t∼20t
highly economical type. and complying with
various needs.
(Mechanical load brake,
●Specification safety brake, is built in
Ordinary type the gear case.)
Rated Load 500kg 1t 2t 2.8t 3t 5t 7.5t 10t 15t 20t

Low headroom type Ordinary type Creep speed type

RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH- RH-
Model
1/2CN 1/2CHN 1CN 1CHN 2CN 2CHN 2.8CN 2.8CHN 3CN 3CHN 5CN 5CHN 7.5CN 7.5CHN 10CN 10CHN 15CN 15CHN 20CN 20CHN Double rail type Low headroom type High lifting head type

Inverter type Double rail type All chain driving type

Lifting Height (m) 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12

0.17 0.17 0.13 0.13 0.13 0.12 0.083 0.075 0.075 0.075
Hoist Lifting 50Hz
Speed
m/s (m/min) 60Hz
(10)
0.20
(10)
0.20
(7.5)
0.15
(7.5)
0.15
(7.5)
0.15
(7)
0.14
(5)
0.10
(4.5)
0.092
(4.5)
0.092
(4.5)
0.092
Home Hoist Air Hoist
(12) (12) (9) (9) (9) (8.4) (6) (5.5) (5.5) (5.5)
H • Handy tool at home, shop or factory. • Installable anywhere if air feed piping is available.
o kW 1.5 2.6 3.7 5.3 5.5 9 11 11 18.5 22 • Small and light Home Hoist is portable, yet it lifts max. 200kg. • Weighing only 15.5kg.
i Hoist Motor
s
t Pole 4 4 4 4 4 4 6 6 4 4

Rated 200V 50Hz 7.0 11.5 16 24 24 34 48 48 68 86

Current 200V 60Hz 6.6 11.5 16 24 24 34 48 48 68 86
(A) 220V 60Hz 6.6 10.5 15 23 23 32 46 46 64 82
Falls 2 2 2 2 2 2 4 4 4 4
Wire Rope Construction 6×W (19) 6×Fi (29)
Dia (mm) 5 8 10 12.5 12.5 16 14 16 20 22.4
L 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000 6000 12000
H 600 700 870 1020 1020 1250 1140 1350 1550 1600
A 335 405 370 445 430 500 470 560 470 560 560 660 710 910 780 955 935 1135 1010 1235
B 325 395 415 540 420 530 465 555 465 555 600 700 800 1000 785 960 875 1075 975 1200
E 175 205 255 255 255 290 285 330 365 365
F 290 330 365 415 415 475 550 690 750 770
Approx. Dimensions K1
40 75 50 125 50 100 55 105 55 105 65 120
(mm)
K2 40 70 50 75 45 75 50 90 50 90 50 100
M 150 150 220 220 220 240 500 450 600 750 1200
φ 22 22 32 32 32 39 45 45 60 75
N 125 125 150 150 150 200 240 240 240 240
R 25 25 30 30 30 40 45 45 65 75
S 0 0 0 25 0 20 0 0 0 0
Model KL-1E KLC-1E Model AH-1RN AH-2RN
Approx. weight (kg) 110 130 130 150 270 320 330 380 330 380 570 610 600 700 1150 1300 1700 1850 1850 2000
Rated Load 200kg Rated Load 500kg 1000kg
Hoist Lifting 0.050 - 0.083m/s 0 - 0.083m/s Air Pressure 2
58.8Pa (6kg/cm )
Speed (3 - 5m/min) (0 - 5m/min)
Lifting Height 3m
Control Voltage 50/60Hz 100V
Hose Aperture 12.7mm
Hoist Motor 140W
Hoist Lifting Speed 0.23m/s 0.12m/s
Net Weight Approx. 7kg
(Rated load) (14m/min) (7m/min)
Lifting Height 3m · 6m
Chain Link chain (φ5) Air Consumption 1.3m3/min
Control Pushbutton pendant Sheet switch fixed speed Net Weight 15.5kg 21.5kg

13 14