Jasmoc Jasmoc

⅐ⅽⅺⅺⅳⅱↂⅷⅽⅼ ⅽⅴ ⅐ⅽⅼↁↂↀↃⅱↂⅷⅽⅼ Ⅱⅳⅱⅶⅼⅽⅺⅽⅵⅷⅳↁ
=ⅡⅶⅳℭⅤⅽↀⅺⅲ℺⅐ⅺⅯↁↁ Ⅱⅳⅱⅶⅼⅽⅺⅽⅵⅷⅳↁ ⅽⅴ ⅗ⅯⅾⅯⅼⅳↁⅳ ⅠⅻⅯⅺⅺ Ⅿⅼⅲ ⅚ⅳⅲⅷↃⅻ℺ↁⅷↈⅳⅲ ⅐ⅽⅼↁↂↀↃⅱↂⅷⅽⅼ ⅐ⅽⅻⅾⅯⅼⅷⅳↁ=
JASMOC
Japan Association of Small and Medium-sized enterprises for Overseas Construction
On the Publication of the
"Collection of Construction Technologies"
The Ministry of Land, Infrastructure, Transport and Tourism is pleased to announce the
publication of the "Collection of Construction Technologies", a compilation of the excellent
world-class construction technologies possessed by Japan's small and medium-sized
construction companies.
The infrastructure of Japan has played a role in supporting the dramatic economic and social
development of the country and its subsequent continued growth. The servicing of
this infrastructure has been the task of the Japanese construction industry, said to number
some 470,000 companies, the majority of those being small and medium-sized construction
companies with their roots in their local communities. Two distinctive features of the small and
medium-sized construction companies of Japan that can be pointed to are the
superior technologies that outperform even the major construction companies, perfected
through repeated improvements by each company in its specific field of expertise; and the
exacting professionalism they exhibit, deserving of the term ‘craftsmanship’. However, due to
the constraints imposed by the scale of these companies, networking outside of Japan has
been poor, and overseas PR has not been adequate.
At the same time, among these small and medium-sized construction companies there are
some, driven by a pioneering spirit and readiness to take on a challenge, that have boldly
expanded into overseas infrastructure markets in search of new business opportunities and
have already achieved good results. The strengths of this kind of Japanese Construction
Company in the global infrastructure market may be summarized largely into the following four
points.
1. Contribution to the development of local human resources through the meticulous transfer of
technology
2. Consideration of the life cycle cost, such as a high level of durability and efficient maintenance
3. Excellent disaster-prevention technology, developed in natural-disaster-prone Japan
4. Consideration for the environment backed by experience, such as dealing with environmental
pollution, energy-saving, etc.
It is our firm belief that the expansion of the activities of small and medium-sized Japanese
companies onto the world stage so that they can make the most of these strengths will
contribute to economic growth and the improvement of the quality of life of people in countries
throughout the world, and we consider it to be in accordance with the spirit of the SDGs.
This "Collection of Construction Technologies" puts the focus on small and medium-sized
companies that in spite of their high technical capabilities are not well-known outside Japan,
with the aim of introducing to a wide audience both at home and abroad the strengths of
each company in terms of its specific construction technologies. These are technologies that
have been perfected through repeated improvements in each and every specific area of
expertise, and cover many different fields.
Should you be interested in any of the technologies presented in this compilation, do by all
means contact the company in question. We are sure that you will be able to find technology to
deal with the specific circumstances of each country, region or project, or technology that will
be of use in solving the problems you face.
Nakami Taishi
Senior Director, International Markets Division,
Real Estate and Construction Economy Bureau,
Ministry of Land, Infrastructure, Transport and Tourism
Table of Contents
1. General Construction 9. Plant

Saitagumi Co., Ltd. ................................................ 1 Sanko Co., Ltd. .................................................... 73
Matsuyama Construction Co., Ltd. ........................ 3 Soltec Industries Co., Ltd. ................................... 75
Hashimotogumi Corporation .................................. 5 ITO Corporation ................................................... 77
Hiraiwa Construction Co., Ltd. ............................... 7 Tamada Corporation ............................................ 79
2. Road 10. Electricity, Communication
Sakai Heavy Industries Ltd. ................................... 9 JESCO Holdings, Inc. .......................................... 81
Taiyu Kensetsu Co., Ltd. .......................................11 Yuicom Networks Co., Ltd. .................................. 83
Okasan Livic Co., Ltd........................................... 13 I.B. Technos Co., Ltd. .......................................... 85
Akros Trading Co., Ltd. ........................................ 15 11. Water Environment
3. Bridge Koken Boring Machine Co., Ltd. .......................... 87
Kochi Marutaka Co., Ltd. ..................................... 17 Daiken Co., Ltd. ................................................... 89
Koatsu Kogyo Corporation .................................. 19 Kyowakiden Industry Co., Ltd. ............................. 91
Juntos Co., Ltd. .................................................... 21 Nissaku Co., Ltd. ................................................. 93
Kawakin Core-Tech Co., Ltd. ............................... 23 ES-Waternet Co., Ltd. .......................................... 95
4. Tunnel Abe Nikko Kogyo Co., Ltd. .................................. 97
Yasuda Engineering Co., Ltd. .............................. 25 Sugawara Setsubi Inc. ......................................... 99
Kidoh Construction Co., Ltd. ................................ 27 TBR Co., Ltd. ..................................................... 101
Iseki Poly-Tech, Inc.............................................. 29 Ogushi Drilling Co., Ltd. ..................................... 103
Chiken Enterprise Co., Ltd. ................................. 31 Sawata Construction Co., Ltd. ........................... 105
Sohatsu Systems Laboratory Inc. ........................ 33 12. Repair, Maintenance
5. Port Sakaegumi Corporation ..................................... 107
Nikken Kogaku Co., Ltd. ...................................... 35 Earth Shift Co., Ltd. ........................................... 109
6. Ground Improvement Toyo Kikai Co., Ltd. ............................................. 111
Onoda Chemico Co., Ltd. .................................... 37 KFC Ltd...............................................................113
Tenox Kyusyu Corporation .................................. 39 13. Equipment, Product
Honma giken Co., Ltd. ......................................... 41 Toyo Kensetsu Kohki Co., Ltd. ...........................115
Murakamijuuki Co., Ltd. ....................................... 43 Nikken Lease Kogyo Co., Ltd. ............................117
SST Association Inc. ............................................ 45 Matsuzawa Kawaraten Inc. ................................119
Aomi Construction Co., Ltd. ................................. 47 14. Boring
Heisei Technos Co., Ltd. ...................................... 49 Sanwa Boring Co., Ltd. ...................................... 121
Miho Technos Co., Ltd. ........................................ 51 15. Waterproof
Taiyo Kisokogyo Co., Ltd. .................................... 53 Chubukenzai Co., Ltd. ....................................... 123
7. Piling 16. Design
Ozawa Civil Engineering and Construction Co., Ltd.. .. 55 Archi-Cube Inc. .................................................. 125
Nihon Base Co., Ltd. ........................................... 57
Hassyu Kenki Co., Ltd. ........................................ 59 ■ References
Futaba Corporation .............................................. 61 Japan Construction International Award
Endo-Ecoraise Co., Ltd. ...................................... 63 Awarded Companies ......................................... 127
Marutai Doboku Corporation ............................... 65 Overseas expansion support for small and
8. Slope medium-sized construction enterprises (SMEs) .... 129
Rontai Co., Ltd. .................................................... 67 Index by Overseas Branches ............................ 131
Takino Filter Inc.................................................... 69
Tokyo Rope Mfg. Co., Ltd. ................................... 71
Construction
General
General Construction in Cambodia
Company SAITAGUMI Co., Ltd. Establishment January 1923
Road
Please ask about anything we might be able to help you with in Cambodia
Employees 42 Website http://www.saita-hd.co.jp
Address 1-2-30 Hikarigaoka, Hakata District, Fukuoka City, Fukuoka 812-0874, Japan
Bridge
Name: Tadashi KAKOO Construction Title: Division Director
Contact
Tel: +81-9-4622-3878 E-mail: [email protected]
Overseas Branches Phnom Penh Office, Kingdom of Cambodia
Tunnel
Possible Implementation Areas Cambodia
Supported Languages English, Khmer
Port
Business Overview
Our company is a general construction company which mainly does business activities in Fukuoka
Improvement
Prefecture, and is one company in the SAITA HOLDING Group. 2019 Feb.: Bridges in North Section Package I on National Road No. 5 Improvement Project, Sub-
Ground
Main Business: Civil, Building Works, Water and Sewage Works, Paving Works, Landscaping Works contractor from Tekken, Taiyu JV in Kingdom of Cambodia
Main Clients: Ministry of Land, Infrastructure, Transport and Tourism, Water Resources Agency, Fukuoka
Prefecture, Fukuoka City, Local Government
Achievements in Japan and Overseas
Piling
1993 Mar : Indus Highway Section XI 77 km (ODA Loan) in Islamic Republic of Pakistan
1994 Apr : Indus Highway Section I 59 km (ODA Loan) in Islamic Republic of Pakistan
2003 May : Access Road and Plant Yard in Islamic Republic of Afghanistan
Slope
2008 Sep : Branch Saita Cambodia Founded in Kingdom of Cambodia
2014 Mar : Sihanouk Province Referral Hospital (ODA Grant Aid) Matsuyama JV in Kingdom of
Cambodia
Plant
2019 Feb : Bridges (Five) in Package I North Section on National Road No. 5 sub-contracted from
Tekken, Taiyu JV in Kingdom of Cambodia
2019 Dec : Assembly Hall and Student Dormitory for Teacher Education Colleges sub-contracted from 2019 Feb.: Bridges in North Section Package I on National Road No. 5 Improvement Project, Sub-
Environment Communication
contractor from Tekken, Taiyu JV in Kingdom of Cambodia
Electricity,
Sumitomo Mitsui in Kingdom of Cambodia
General Construction Industry, Geological Survey,
Field Category Construction
Topographic Survey
Technical Overview
Water
[Features of Organization (Saita Cambodia)]
 We are organized to reduce the number of Japanese engineers to the lowest possible level and
Maintenance
Repair,
employ Cambodian engineers, achieving not only high cost performance, but also creating the
opportunity to transfer technology to them and develop human resources through experience.
 Our staff are very familiar with Cambodia, have more experience in construction work in this country,
Equipment,
Product
can use English, Cambodian, and Japanese, gain experience by training foremen and workers, and
Overall View by Drone View of Entrance in turn are helping in the development of Cambodia.
Sihanouk Province Referral Hospital Improvement Project in Kingdom of Cambodia  Our staff has an intimate knowledge of general construction, can organize construction work, building
Boring
work, civil work, water and sewage system work, pavement work, and we have a concrete batching
Work System
plant and agitator trucks which enable us to supply fresh concrete.
Branch Saita Cambodia was founded with the Phnom Penh Office, where there is one General Manager
 Our staff has experience in topographic surveys and geological surveys, and can deal with this work.
(Japanese) and 5 staff consisting of a structural engineer, mechanical engineer, electrical engineer and
Waterproof
two office workers. The staff can use Khmer, English and Japanese, are forming close relationships with Conditions for Using Technology
the local community and are making efforts to facilitate regional development. Please contact us as we will reply individually to your inquiry.
Design
1 2
Construction
General
Cambodia Building Work Centered on Quality
Company MATSUYAMA CONSTRUCTION Co., Ltd. Establishment 1956
Road
http://www.matsuyam High Technique of Hospital Construction
Employees 68 Website
a-k.co.jp/
Address 2-24-23 Takasago, Chuo District, Fukuoka City, Fukuoka, Japan Construction of the medical and surgical wards
Bridge
Name: Mitsuru TSUDA Title: Director
Contact Scope of Work
Tel: +81-92-533-0001 E-mail: [email protected]  ER, Imagery and Operation Building: 1,080 m2
Oversea Branch None  Administration Building (2 story): 1,071 m2
Tunnel
Possible Implementation Areas Cambodia, South East Asia  OB/GY and Pediatric Ward Building: 1,305 m2
 General Medicine and Surgery Ward Building: 945 m2
Supported Languages English
 Service Building: 190 m2
Port
 Elevated Water Tank/Connecting Corridor: 594 m2
Business Overview
Total Area: 5,185 m2
We are a construction company which focuses on the business activities described below. Our main
Improvement
Ground
clients are the Ministry of Land, Infrastructure, Transportation and Tourism, NEXCO, local governments
General Building Works (Include Building Work (Including
and electrical power companies. Field Category
External Works) Mechanical & Electrical Works)
 Civil Works, Building Work, Design and Construction Registration,
2017: Received Letter of Appreciation from Japanese Association in Cambodia
Piling
 Water and Sewage Water System Work Awards
 Port Civil Work, Dredging Work
Technical Overview
 Road Pavement Work
[Technical Features]
Slope
 Landscape Work
Our company takes the experience of techniques in Japan applies them in Cambodia to projects like the
Other ODA Grant Aid, Accepting Trainees from Myanmar
Sihanouk Province Referral Hospital Improvement Project. In Sihanouk Province, the Province Referral
Hospital is a high level public hospital, and we are incorporating the quality needed in this improvement
Project: Sihanouk Province Referral Hospital Project in the Kingdom of Cambodia
Plant
project to provide medical services by constructing a new facility and installing new medical equipment.
(Total Area: 5,185 m2）
 We are directly implementing this project by ourselves. Under the supervision of a Japanese engineer,
Client: Ministry of Health of Kingdom of Cambodia
we employ local engineers to make it easier to prepare the construction equipment and tools
Electricity,
Consultant: The Consortium of Azusa Sekkei Co., Ltd and INTEM Consulting Inc JV
ourselves, and can also manage and control electrical work, mechanical work and medical gas system
Constructed by “Saita, Matsuyama JV” (2016 Feb.)
work.
 We have assigned a total 19 Japanese engineers and local engineers persons to our construction
Water
organization, and take care to train and transfer technology to the local engineers.
 After the referral hospital was constructed, we have noticed that the quality of medical services has
improved, enhancing the lives of people living in the province by providing a high level service and
Maintenance
Repair,
good health.
[Merits of Adopting Technology]
By organizing a Japanese manager and local engineers in a construction organization, it is possible to
Equipment,
Product
prepare the construction equipment and smoothly manage the work, reducing the construction period.
Overall View of Hospital Administration Building
[Contributions to Solving Issues]
Work System
Through the implementation of projects, we provide technical instruction to local engineers who gain
Project Manager: One Japanese person
more knowledge and improve their skills in infrastructure construction in the future.
Boring
Construction Engineering: One Japanese person, one Cambodian person
[Video Link]
Deputy Manager: Four Japanese persons (Architecture, Electrical, Mechanical and Plumbing)
http://www.matsuyama-k.co.jp/
CAD Operator: Six Cambodian persons
Waterproof
Site Engineer: One Japanese person, four Cambodian persons Conditions for Using Technology
Safety Control: One Cambodian person We will reply to you individually, so please contact us.
Total: 19 persons
Design
3 4
Construction
General
Design and building of factories related to the food industry
with Japan quality
Company HASHIMOTOGUMI Corporation Establishment 1922
Road
Design and building of Food factories, Ultra-low temperature cold storage facilities, and
Employees 250 Website www.hashimotogumi.co.jp/
Cleanrooms which are applicable to HACCP
Address 5-9-3 Sakae-cho, Yaizu City, Shizuoka, Japan
Bridge
Name: Hideki MIURA Overseas Preparatory Office Title: Deputy General Manager
Contact
Overseas Branches Vietnam (local corporation)
Tunnel
Possible Implementation Areas Vietnam and neighboring countries
Supported Languages Vietnamese (e-mail), English (e-mail)
Port
MARUIRI FOOD SUPPLY YAMAZAKI
Business Overview
Food Factory, ULT Cold storage Food Factory and R&D Center
[Offices] Headquarters: Shizuoka, Branches: Tokyo, Chiba, Miyagi
Improvement
[Lines of Business] Construction, architecture, civil engineering and property services (general
Ground
construction business), ready-mixed concrete manufacturing and sales (plant
manufacturing capacity 195 m3/hrs)
[Turnover] 133 mil USD @105.25 (2019 fiscal year)
[Classification] Civil Engineering: ports, rivers, roads, land reclamation, water and sewage
Piling
Building Construction: food factories, large cold storage warehouses, commercial
facilities, accommodation facilities, medical facilities, offices and housing
Field Category
Slope
Architecture Design, building, management
The 34th Shizuoka Construction Industry Association MONOZUKURI tournament,
Registration,
Prize for Excellence for “Design and Building of MARUIRI FOOD SUPPLY Food
Awards
Factory ULT Cold storage”
Plant
Technical Overview
Ownership of a A panoramic view of the YAIZU Typical Japanese style hotel [Technical Features]
Electricity,
floating crane barge fisheries port which has facilities which was designed and
(280t) we have designed and built. built by us. ・ We have a long history of surveying, planning, designing, constructing, and maintaining food factories and
ultra-low temperature refrigerated warehouses in Japan. In recent years, we have accumulated a lot of
know-how, especially in order to achieve HACCP (Hazard Analysis Critical Control Point).
[History] 2017: Hired four Vietnamese engineers ・ In the design and construction stages, HASHIMOTOGUMI Corporation is able to take a coordinating role
Water
2019: Established Local Company named “HOPE E&C JSC.” with consultants and electrical and equipment manufacturers to provide optimal solutions to customers.
(HASHIMOTOGUMI Corporation 35%, Ozawa Civil E&C Co., Ltd. 35%, Local Partner 30%) [Merits of Adopting Technology]
[Construction Record] ・ Providing the same level of manufacturing environment in overseas countries as in Japan by realizing
Maintenance
2019 Vietnam Design entrustment of Accommodation facility model house
factories and warehouses of Japanese quality in terms of design and build.
Repair,
[HASHIMOTOGUMI Corporation]
2020 Vietnam Construction management of Underground structure temporary earth ・ In particular, for Japanese companies that relocate their manufacturing bases overseas, we will relieve
retaining wall [HASHIMOTOGUMI Corporation] anxiety concerning the management of the design and build process during construction.
2020 Vietnam Construction Management of Silo repair work [HOPE E&C JSC.] [Contributions to Solving Issues]
Equipment,
Product
2021 China Basic Design and Supervision work of Food Factory [HASHIMOTOGUMI ・ For Japanese companies planning to move their manufacturing bases overseas, creating environment to
Corporation] *Under negotiation facilitate easy expansion of business for companies from the construction point of view.
Work System ・ Employment creation and ripple effect on economy in related industries by expanding business of
[HASHIMOTOGUMI Corporation] companies into Vietnam and neighboring countries.
Boring
・ Vietnamese Engineers are under OJT and Off-JT in both Vietnam and Japan for construction, ・ Creating opportunities for local construction personnel to acquire specialized construction techniques.
design, and estimation. Conditions for Using Technology
・ One engineer got Second Class Engineer for Civil Engineering
・ Compliance with local laws and regulations, including construction-related laws and regulations.
Waterproof
・ In 2020, engineer was involved in temporary earth retaining work in Ho Chi Ming City for 3 months.
・ Please feel free to contact us without any hesitation, including with respect to restrictions depending on
[HOPE E&C JSC.]
the surrounding infrastructure (roads, electricity, water, etc.).
・ Two Vietnamese Engineers are under OJT and Off-JT from Japan.
Design
5 6
Construction
General
Realizing Japan quality factories at a low price
Company HIRAIWA Construction Co., Ltd. Establishment 1946
Road
Vietnam: Support everything from land selection, design and construction, to follow up
Employees 130 Website https://www.hiraiwa.co.jp/
Address 8-19 Minamisumyoshi, Tokorozawa-Shi, Saitama, 359-1188, Japan
Bridge
Name: Tomomi TAMAKOSHI Sales Department Title: Director
Contact
Overseas Branches Vietnam (Ha Noi, Ho Chi Minh City)
Tunnel
Possible Implementation Areas Entire country of Vietnam
Supported Languages English, Vietnamese
We offer construction with resident management by a Japanese engineer
Port
Business Overview
[JAPAN]
Field Construction Category Construction method
Improvement
General construction industry (Building construction, engineering work, water supply facilities)
Ground
Registration, We construct Japan quality at a low cost. As advance support of the company in Japan,
1. Specialized construction (Black kite, earth work, concrete construction) Awards we support various procedures, starting with the choice of land.
2. Renewal construction
3. Earthquake-resistant repair work Technical Overview
Piling
4. Real estate transactions [Vietnam Construction System]
[VIETNAM] Experienced Japanese engineer resides locally and performs

1. Design, construction and repair of factories and warehouses ① Japanese engineer
Slope
construction management at Japan level quality.
2. Offices / store interiors
Japanese engineer will immediately respond to initial defects.
3. Support for selecting industrial parks ② Follow-up service
We also carry out 1 year and 2 year inspections.
Plant
4. Application support for various licenses (ex: ERC, IRC, EIA)
Achievements in Japan and Overseas All on-site meetings will be conducted in Japanese, and
③ Japanese communication
[The construction results in Vietnam] customer requests will be reflected in the construction work.
Electricity,
Hai Phong City: Nomura-Haiphong-IZ Metal parts assembly plant enlargement construction
Materials to be submitted to the customer and the head office in
(completed in May 2020) ④ Report written in Japanese
Japan will also be submitted in Japanese.
Water
We install a fixed point camera and allow you to confirm
⑤ Fixed point camera
construction progress from Japan.
Maintenance
Repair,
Vietnam and Japan HQ will work together to proceed with the
Hung Yen Province: Thang Long2-IP Ceramic parts manufacturing factory interior construction ⑥ Support for Japan HQ
construction. We dispatch a Japanese engineer regularly and
(completed in June 2020)
give tests at the company.
Equipment,
[Video Link]
Product
https://www.hiraiwa.co.jp/works/
https://www.facebook.com/vietnam.hiraiwa.5
About Hiraiwa Vietnam
Boring
Hiraiwa Vietnam is a wholly owned subsidiary of Hiraiwa Corporation, which was established 74 years
Work System (in Vietnam) ago and is headquartered in Tokorozawa City, Saitama Prefecture. We have bases in Ho Chi Minh City
Waterproof
・ Resident management by Japanese engineer * Patrol management of rental factory and Hanoi, and provide Japanese quality construction by Japanese engineers at a low cost. Please feel
・ Submit weekly progress reports with photos in Japanese free to contact us for anything from selecting an industrial park to supporting your business expansion.
Design
7 8
Construction
General
Stabilizer Construction Method
Company Sakai Heavy Industries Ltd. Establishment May 1918
Road
Employees 290 Website http://www.sakainet.co.jp Road paving technology that enables the construction of low cost
and durable pavement using existing road materials
Address 4-8 Shibadaimon 1-Chome, Minato-ku, Tokyo, 105-0012, Japan
Bridge
Name: Hitoshi FUJITA Engineering Sales Division Title: General Manager
Contact
Tel:+81-3-3431-9971 E-mail: [email protected]
Overseas Branches Indonesia, China, USA, Thailand
Tunnel
Possible Implementation Areas Asia, Africa, North and South America, Middle East
Port
Business Overview
Manufacture and sales of construction equipment and industrial machinery, and sales of outsourced
Improvement
industrial machinery. Our main products are described below.
Ground
Stabilizer Training for technical transfer
[Compaction equipment]
 Vibratory Single Drum Rollers, Vibratory Tandem Rollers, Static Pneumatic Tire Rollers, Static Three Field Road pavement construction Category Construction Method, Equipment
Wheel Rollers, Vibratory Pneumatic Tire Rollers, Rammers, Compactors and Walk Behind Rollers Registration,
1st Japan Construction International Award (MLIT)
Piling
Awards
[Road maintenance and repair equipment]
 Road Planers, Road Stabilizers, Asphalt Pavers, Road Cleaners and Water Sprinklers Technical Overview
Achievements in Japan and Overseas [Technical Features]
Slope
In 1929, SAKAI developed the first Road Roller made in Japan. Since then, SAKAI has supplied many  Construction of strong and long life pavement using a stabilizer that crushes the damaged existing
kinds of road rollers to more than 140 countries through our distributers as pioneer of road construction road surface and mixes existing materials with a cement and asphalt emulsion.
 This method is low cost and saves materials because the existing materials are recycled.
Plant
equipment. SAKAI has developed a vibratory pneumatic tire roller that is a one of a kind technology in
 This method can be used widely to improve soil roads, gravel roads and damaged asphalt pavement.
the world. Furthermore SAKAI is engaged in the technical transfer of the stabilizer construction method
to contribute road development in Asian and African countries through ODA projects.  Time saving: The stabilizer crushes and mixes existing materials on-site, reducing the time required.
Electricity,
 Reduction of risk of material procurement and construction cost: This method reuses existing
materials.
 Reduction of life cycle cost: This method strengthens the structural performance and makes the
Water
pavement durable.
 In many countries the volume of traffic volume is increasing more rapidly than roads are expanded.
Maintenance
Repair,
There is concern that the traffic volume will continue to increase, resulting in increased damage to
roads. The biggest problem is using budgets effectively for maintenance and new construction. This
method facilitates effective road infrastructure development by reducing maintenance costs.
Equipment,
Vibratory Pneumatic Tire Roller
Product
 After the technical transfer, introduced country can construct roads itself.
 Quick recovery from natural disasters like earthquakes is possible because of minimum material
Work System
procurement.
The SAKAI global service division is in charge of providing training for machine operation and
[Video Link]
Boring
maintenance in cooperation with distributers, technical transfer of the stabilizer construction method,
100 year anniversary video: https://www.youtube.com/watch?v=JivSOUyzvII&feature=youtu.be
and the dispatch of Japanese technical engineers to countries to introduce material composition design
Conditions for Using Technology
Waterproof
and construction methods. SAKAI produces equipment in Indonesia, China, and the U.S.A where it trains
 Securing of passable road for stabilizer.
local staff and local workers.
 Cement and other additives are available.
Design
9 10
Construction
General
Porous asphalt pavement using asphalt modifier material "TPS"
Company TAIYU KENSETSU CO., LTD Establishment 1928
Asphalt modifier material "TPS" can be used to construct high-performance porous asphalt
Road
Employees 415 Website http://www.taiyu.jp/ pavement anytime, anywhere
Address 5-14-2 Kanayama, Naka-ku, Nagoya, Japan Visibility of the road surface in
rainy weather and at night
Bridge
Name: Asako Nakamura Global Business
Contact
Overseas Branches Vietnam (Ha Noi)
Tunnel
Construction situation
Possible Implementation Areas Asian countries
Supported Languages English (e-mail only)
Port
Business Overview
Asphalt modifier material for Conventional Porous asphalt
1. Construction industry pavement
porous asphalt pavement -TPS Construction situation pavement
Improvement
2. Manufacturing and selling materials for pavement
Ground
Our main business in Japan is road construction with a focus on pavement. Additionally, we produce Field Pavement Category Materials
and sell materials for pavement. Our main business in foreign countries is the sales of materials for Registration, License no: ZL200410043134.8 (China), 109599 (Singapore), HK1075905 (Taiwan)
pavement that we have developed ourselves. Furthermore, we are doing our best to establish a Awards Decision No. 431/QD-BGTVT (Vietnam, 04 February 2016)
trustworthy relationship with the local governments, universities, research organizations, and private
Piling
companies in these countries. Our lineup of materials for pavement consist of Asphalt modifier (TPS) Technical Overview
for porous asphalt pavement, Anti-rutting asphalt modifier (TPP), anti-stripping agent (TFH), cement- [Technical Features]
milk modifier (STP) for semi-flexible pavement, and others. We are eager to proceed with the sales of  Porous asphalt pavement not only has distinguished performance such as noise reduction and high
our materials through technical support to foreign governments or companies. In Vietnam, we durability, but also significantly improves the visibility of road surface on rainy days and at nights, and it
Slope
established “TAIYU VIETNAM CO., LTD.” as a sales base of our materials in February, 2018. For other contributes to traffic safety and driving comfort.
countries, we are selling our products through local agencies or technical cooperation companies.  The core of porous asphalt pavement uses highly modified asphalt. However, highly modified asphalt has
the problem with quality deterioration during storage, making it difficult to export this material to foreign
Achievements in Japan and Overseas countries.
Plant
1. TPS sales results (as of Nov. 2020)  When TPS is used, since there is no problem with quality deterioration, TPS can be exported and used
South Korea: Namhae Expressway (2001) etc., equivalent to 2,200,000 m2 anywhere.
China: Shaanxi Airport Expressway (2003) etc., equivalent to 3,380,000 m2  Based on our long-term experiences, we can provide any country with technical guidance on porous
asphalt pavement in order to meet conditions in the country such as the asphalt plants, aggregates used,
Electricity,
Vietnam: Phap Van – Cau Gie Expressway (2018), equivalent to 610,000 m2 paving system, etc.
Others: Taiwan, Thailand, Kazakhstan, Indonesia, Malaysia, equivalent to 150,000 m2
2. Anti-stripping material (TFH: Tough Fix Hyper)  The only task that needs to be done at the asphalt plant is to put TPS into the asphalt mixer. Special
Used 830,000 tons of Asphalt mixture in Vietnam equipment is not required. (For big projects, an automatic weighing & adding equipment is provided.)
Water
3. Others: Expect to expand sales of semi-flexible pavement modifier material (STP) in the future. Sales  Straight asphalt 60/80 is used as the base asphalt. TPS comprising 12% of the total asphalt is put into the
activities for Anti-rutting asphalt modifier (TPP) being conducted in Vietnam and the Philippines. mixer. Therefore, a normal asphalt mixture can be also produced in parallel with the porous asphalt mixture.
4. 1st Japan Construction International Award (MLIT) SMEs category  We would be happy to provide users with technical support on material selection, mix design, etc.
Maintenance
Repair,
 This technology reduces the adverse effects on economic activities such as logistics due to the rainy
season and squalls. It helps to reduce traffic jams and slow driving speeds due to water splashing and the
reflection of lights that occur when it rains.
Equipment,
 It has superior rutting resistance, crack resistance, and scattering resistance of aggregates, drainage
Product
function, and low noise function, so it is excellent for safety, the environment, and economy compared to
conventional asphalt pavement.
Vietnam: Cau Gie – Ninh Binh China: Shaanxi Airport II [Video Link]
Expressway (test construction, 2014) Expressway (2009) https://youtu.be/7JmpwG8lYho
https://youtu.be/cbGja-lMlrA
Boring
Work System Conditions for Using Technology
Engineers are dispatched from Japan for construction supervision if needed. Regarding TPS, a  Porous asphalt is preferable for expressways, national roads and elevated roads where there is low risk of
consortium for sales has been formed with local companies in Vietnam. In China and South Korea, TPS the air voids being clogged. When porous asphalt is used on streets in cities, adequate discussions should
Waterproof
is being sold by local distributors or technical cooperation companies in conjunction with technical be held on dealing with intersections.
instructions we provide at construction sites. Intensive lectures on our advanced technologies are being  Even when there is concern for possible stripping by aggregates such as granite, the use of the anti-
stripping agent “TFH” together with TPS eliminates the problem of stripping.
regularly given at universities in Vietnam.
Design
11 12
Construction
General
EPS (Expanded Poly-Styrol) Construction Method
Company OKASAN LIVIC CO., LTD. Establishment 1971
Road
Employees 231 Website https://www.okasanlivic.co.jp/ Lightweight embankment method using EPS blocks instead of soil to improve workability
Address Nissin Build. 10F, 1-8-27 Kounan, Minato-ku, Tokyo, 108-0075, Japan
Bridge
Name: Satoshi KOBAYASHI Project Sales Dept. Title: Deputy Director
Contact
Overseas Branches Vietnam
Tunnel
Possible Implementation Areas Vietnam, Myanmar, Philippines, Indonesia
Supported Languages English (e-mail only), Vietnamese (e-mail only)
Port
Business Overview Field test (Vietnam) Buoyancy-resistant block
Road embankment (Japan)
(Reduces buoyancy by 60%)
Construction Material Manufacturer and Supplier
Improvement
 Embankments: Multi-anchored retaining walls, EDO-EPS method, Geogrid (TRIGRID EX), Paralink Field Road embankment, Backfilling of structures Category Method, Material
Ground
(High Strength Web-shaped Geosynthetic) Registration, "EDO-EPS Construction Method Standard" 3rd Revised Edition (2019, Japan)
Awards Applying for Vietnamese Standard “TCCS”
 Steel materials: Liner Plate, Corrugated Pipe
 Maintenance: Pipe Rehabilitation method (ARIS Liner / SW Liner), High durability fences Technical Overview
Piling
 Others: Takino Filter, HDPE pipe, Plastic underground water tanks etc. [Technical Features]
 First construction in Norway in 1972. Introduced in Japan in 1985.
Slope
 Unique technologies have been developed since then.
 Japanese quality EPS blocks can be supplied at low cost.
Plant
Multi-anchored retaining wall Caisson Pile (Liner Plate)  Easy handling, easy installation without heavy machinery.
Achievements in Japan and Overseas  Not restricted by depth and softness of soft layer unlike piles.
Electricity,
1. Overseas Sales  Makes construction less costly and quicker on any ground.
 Products: Geogrid, Paralink, Takino Filter, Liner Plate, Corrugated Pipe
 Countries: Vietnam, Philippines, Pakistan, Nepal, Honduras, Bhutan, China, South Korea [Contributions to Solving Issues]
Water
Test result of EPS block
2. Overseas Expansion  Prevents settlement of embankment on ultra-soft ground. manufactured in Vietnam
2011: Ho Chi Minh City Representative Office founded  Repairs the difference between abutment and approaching road.
Maintenance
2015: OKASAN LIVIC VIETNAM CO.,LTD founded
Repair,
Equipment,
Product
Boring
Geogrid (Nepal) OKASAN LIVIC VIETNAM CO., LTD. Application example to Mekong Delta
Waterproof
Providing Japanese technical advisors for local contractors.  Buoyancy-resistant blocks can be applied in case of high groundwater.
 We can propose the best solution for any site with a track record of over 35 years.
Design
13 14
Construction
General
DENKA (ROAD SURFACE REPAIR MATERIAL)
ESTOPATCH RSR
Company AKROS TRADING CO., LTD. Establishment 1992
Road
Simple road surface repair material, no water or electric mixer required
Employees 307 Website http://www.yk-akros.com/ Can walk on surface in 3 hours after repair, can open to car and forklift traffic in 8 hours
Address 12th Floor, B Wing, Shiba Park Bldg, 4-1 Shiba-Koen 2-chome, Minato-Ku, Tokyo, Japan
Bridge
Name: Yutaka OHNO Special Cement Additives Dept. Title: Sales Manager
Contact
TEL: +81-3-5405-6025 E-mail: [email protected]
Shanghai, Taiwan, Hong Kong, Thailand, Malaysia, Indonesia,
Overseas Branches
Tunnel
Vietnam, India
Shanghai, Taiwan, Hong Kong, Thailand, Malaysia, Indonesia,
Possible Implementation Areas
Vietnam, India
Supported Languages English, Indonesian, Korean, Thai, Pekingese
Port
Business Overview
Improvement
Ground
1. Function: We have been trading in electronic materials, synthetic resin, synthetic rubber, and construction Field Road Surface Repair (Asphalt, Concrete, Steel Plate) Category Material
and building materials to Southeast Asian countries as Denka's trading company since we were established
and started to operate subsidiary companies in Southeast Asian countries in early 1990.
Technical Overview
Piling
2. Features: Indonesian company “PT HISSAN TRADING” has a lot of sales references for quick hardening
cement additives used for tunnel work, road and bridge repairing materials, ground improvement materials
ESTOPATCH RSR
and special tools for the expanding infrastructure market in Southeast Asian countries.
 Simple Application: No water or electric mixing required, road surface can be repaired with only a
Slope
One-Stop Service: Product proposal, Export & Import
trowel
[Original Technology]
 Quick opening: Can walk on surface in 3 hours, open to car and forklift traffic in 8 hours
(1) DENKA NATMIC: Quick hardening cement additives for NATM Tunnels
 Excellent durability: Follows the substrate with high adhesion
Plant
(2) Quick Set: Super rapid hardening cement for urgent road repair
(3) Estopatch RSR: Easy road repair material without using water or electric tools
 Small area / thin coating repair: 2 mm to 10 mm (0.93 to 0.19 m2) / set
 Repairs can be made with a small package.
Electricity,
 Because it is packed in a small package, it can be stored at factories, road management companies
Achievements in Japan and Overseas and construction companies.

Water
2000: NATM tunnel (20 km) for Taiwan High Speed Railway: Supplied DENKA NATMIC
 By performing road surface repairs just in time, from occurrence → inspection → repair, it is possible
2010: Pahang-Selangor Project Malaysia (44 km): Supplied DENKA PF Mortar
to prevent serious deterioration and increases in the damaged area.
2012: NATAM tunnel for Pesangan Hydro power plant Indonesia (12 km): Supplied DENKA NATMIC
Maintenance
 Performing daily maintenance will lead to a reduction in large-scale regular maintenance costs.
Repair,
2012-: Indonesia CIKAMPEK Toll Road urgent road repairs: Supplied DENKA QUICKSET
[Video Link]
2018: Indonesia･SURAMADU Bridge road surface repairs: Supplied DENKA Estopatch RSR
https://www.youtube.com/watch?v=SOOHNE__Ti4
2020-: NATAM tunnel for ASAHAN 3 Hydro power plant Indonesia (8 km): Supplied DENKA NATMIC
Equipment,
Product
https://www.youtube.com/watch?v=HIepT0Uy0e4
Conditions for utilizing technology
 Curing time will be longer than usual at temperatures below 5℃
Boring
 If the road surface temperature is 50℃ or higher, the pot life will be shorter.
 Although it can adhere to asphalt, concrete, and steel plates, it cannot be installed on roadbeds,
foundations, or areas where soil is exposed. (Please remove dust, dirt, and latency in the area before
Waterproof
Work System repairing.)
We don’t provide construction work services since we are trading company.  Solvent-based paint cannot be applied to the repaired area.
Design
15 16
Construction
General
SqC Pier Method
Company Kochi Marutaka Co., Ltd Establishment 1965
Road
This method enables a safe, high quality temporary bridge to be installed even on steep slopes,
Employees 79 Website https://www.ko-marutaka.co.jp/ and quick installation of a temporary gantry
Address Azono Minami Machi 12-13, Kochi City, Kochi, Japan
Title: Executive officer, Director
Bridge
Name: Osamu YOSHIMOTO Business management
Contact of business management
Overseas Branches Candidate sites: Vietnam, Thailand, Myanmar
Tunnel
Possible Implementation Areas Asia, Africa
Supported Languages Response by email in Chinese, Indonesian or English
Port
Business Overview
1. Specialist in foundation & construction (Large diameter rock drilling, retaining walls, preventive piles,
Improvement
Pakistan Route 70 Repair Work
Ground
bridge foundations, well digging)
2. Bridges (Steel structures and design of construction equipment, structural analysis, production and Field Bridge construction Category Construction Method
construction, general civil engineering, machine and equipment installation) NETIS: QS-020042-VE
[Original Technology] Registration,
Monozukuri Nippon Grand Award: Shikoku Bureau of Economy, Trade and Industry,
Piling
Awards
(1) SqC pier method: For piers and gantries that use steel pipes for piles, after we install the upper tunnel Received Kochi Invention and Innovation award
made in our factory, we drill the bearing pile (steel pile) and attach the upper panel. The other
construction method is to drill the bearing pile (steel pipe) first and then connect a pile head cap to Technical Overview
Slope
the superstructure via the other pile head cap. [Technical Features]
(2) Long span: The upper bridge is extended by a joint structure. We aim for fast installation and removal,  The SqC pier method provides a pier and gantry that uses steel pipes for the pillar piles, and does
prioritizing construction at the same speed as the bridge. An additional benefit to this is that the pin not require foundation work. After installing the upper tunnel made in our factory, the bearing pile
structure can be reused, which can reduce costs. The use of long girder lengths to reduce the number (steel pile) is drilled and the upper panel is attached first. The other construction method is to drill the
Plant
bearing pile (steel pipe) first and connect a pile head cap to the superstructure via the other pile head
of bridge piers makes the process more safe and environmentally friendly.
cap.
(3) Sectional self-propelled work barge: This self-propelled structure is equipped with two engines,  Bridge construction, Road construction, Dam construction, Tunnel construction, Disaster recovery,
eliminating the necessity of a tugboat for the pontoon. The weight that can be transported on water Temporary bridge and Temporary stage, etc.
Electricity,
is 41 tons. However, this will vary depending on the draft determined by equipment such as a cranes, [Merits of Adopting Technology]
backhoe or heavy machine attachments. The barge can be divided into four components consisting 1. Construction period shortened by improving workability: By using steel materials that have been pre-
of one trailer and three mid-size trucks for transport on land, and it can be assembled in a short period formed in the factory, the construction period can be shortened by reducing on-site assembly work.
2. Improvement of safety and quality assurance: Because the superstructure is built first, work in high
of time (NETIS: SK-160002-A).
Water
places can be reduced, realizing a safe construction site. In addition, quality can be improved by
Achievements in Japan and Overseas reducing on-site assembly work, for which it is difficult to ensure accuracy.
3. Applicable to wide range: Can be applied to all areas where the bearing piles can be drilled (such as
2016 to 2019: Pakistan “Pakistan National route N70”
Maintenance
silt, sediment, soft rock and hard rock).
Repair,
Details of constructed bridge: L 381.0 m / W 8.0 m / [Contributions to Solving Issues]
231 steel pipe piles The quick restoration of roads and bridges in disaster areas as where landslides often occur has a direct
2016: Uganda “Cable-stayed bridge on the Nile river” impact on economic activity. This method can help solve problems faster by enabling high-quality
Equipment,
temporary bridges to be constructed and which can be temporarily used, even on steep slopes and in
Product
All-turn preceding DH work, casing extraction work
Details of constructed bridge: Pile length 23 m / highlands.
[Video Link]
Diameter of steel pipe pile Φ630 mm / 27 piles
Pakistan Uganda https://www.ko-marutaka.co.jp
Boring
 In Pakistan and Uganda, technical experts were dispatched to supervise local workers. Natural condition: None in particular
 Monastery school will be opened next year in Myanmar. We will develop human resources there as Site condition: A road is required to carry materials and equipment to the site, a yard is required for the
Waterproof
a solution for the shortage of workers in Japan. assembly of a crawler crane (this can be on the road). A temporary yard is needed. Regarding the type
 Trained personnel from Myanmar and engineers will be employed to facilitate expansion into third of soil, it must allow piles to be installed. From past results, the maximum span length is 12.0 m or more
(upper panel advance erection method), 16.0 m or more (for pile head cap method)
world countries.
Design
17 18
Construction
General
Total Construction of Prestressed Concrete Bridges
Company Koatsu Kogyo Corporation Establishment 1959
Road
Employees 276 Website http://www.koatsuind.co.jp Construction of post-tensioned and pre-tensioned prestressed concrete bridges
Address 5-17-5 Ishiki, Kagoshima-shi, Kagoshima, Japan
Bridge
Name: Hiroki Sugimoto Overseas Business Division Title: Sales Division Manager
Contact
Overseas Branches None
Tunnel
Possible Implementation Areas Kyrgyz, Sri Lanka, Indonesia, Vietnam, Haiti, Togo
Photo-1 Photo-2 Photo-3
Port
Business Overview
Photo-1: Saikoji No.7 Bridge, Length 352 m, PC 4-span continuous rigid frame box girder bridge
1. Design and construction of PC bridges and PC tanks, civil engineering work, foundation pile driving, Photo-2: Koshiki No.4 Bridge, Length 383 m, PC 4-span continuous box girder bridge
Improvement
etc. Photo-3: Kozuka Bridge, Length 54.5 m, PC 2-span continuous T-girder bridge
Ground
2. Design, manufacture and sale of concrete products
Field Bridge construction Category Construction
3. Rental of concrete product molds
Certificate of Excellent Construction Performance Company, 2020
Registration,
4. Manufacture and sale of building materials Kyushu Regional Development Bureau: Suzaki Bridge, Kagoshima Prefecture
Piling
Awards
Excellent Construction Award 2020
5. Design, construction, supervision and contracting for civil engineering and construction works
6. Purchase, sale, rental, exchange and management of real estate and other brokerage business Technical Overview
Slope
7. Residential land development and land development business
By prestressing the concrete, the durability and watertightness of the components are improved,
<PC bridge construction subcontracted from major construction company> resulting in fewer cracks due to load which is concrete’s biggest weakness. As well as lower life-cycle
Plant
costs, reducing the section of the components enables the span to be extended while reducing the
weight of the components.
Electricity,
・ Components can easily be made in any shape and with any section.
・ Reducing on-site work by the use of pre-cast components saves manpower and shortens the work
period.
Water
・ Work and costs involved in long-term repairs are reduced by improved life-cycle costs.
・ The proportion of equipment, materials and manpower procured in the vicinity of the construction site
Project for Reconstruction of Project for Construction of Kara and Koumongou Bridges in Republic of is increased, thus giving back to the local economy.
Maintenance
Kok-Art River Bridge on Togo
Repair,
Bishkek-Osh Road in Kyrgyz Kara Bridge Koumongou Bridge ・ Prestressed concrete technology and bridge construction technology are transferred to local human
Post-tensioned type Post-tensioned type resources.
Post-tensioned 3-span Kara Bridge
continuous T-girder bridge 3-span continuous T-girder bridge, Length 120 m [Construction equipment and prestressed concrete manufacturing plants]
Equipment,
Length: 89 m Koumongou Bridge
Product
4-span continuous T-girder bridge, Length 160 m
Double girder Cantilever erection PC slab production Pre-tensioned girder
Work System
Boring
We have a total of about 60 serious, hardworking and enthusiastic engineers in Japan and abroad,
including some with experience of working overseas.
The erection equipment is brought from Japan. (We have an excellent performance record in Kyrgyz,
Waterproof
Togo and Haiti.)
We accept technical interns in Japan in an endeavor to train engineers. Consideration of weather conditions or restricted work space may be necessary.
Design
19 20
Construction
General
Design, Construction and Investigation of Concrete Bridges
Company Juntos Co., Ltd Establishment 1991
Road
We perform design, construction management, and damage investigation for concrete bridges
Employees 50 Website http://www.juntos.co.jp
Address 4F 7-2 Hakataeki-Chuogai, Hakata-ku, Fukuoka City, Fukuoka, Japan
Bridge
Name: Takashi KATABUCHI Administration Title: Manager
Contact
Tunnel
Possible Implementation Areas Southeast Asia, India, Africa
Supported Languages English, Vietnamese
Port
Business Overview
We are a professional company that consistently designs, constructs and maintains bridges.
Improvement
1. Bridge planning, Bridge type selection, Detailed design, Construction planning
Ground
2. Dynamic & Static Analysis, FEM (Finite Element Method) Analysis
3. Detailed investigation of bridges, Superstructure non-destructive investigation
4. Bridge repair design, Bridge seismic reinforcement design
Piling
Field Bridge construction, Construction management, Bridge design, Bridges
5. Drawings, Quantity calculation, Checking
6. Concrete bridge superstructure work, Bridge repair work, Construction Management Technical Overview
We design according to the standards of the country, and carry out surveys and construction
Slope
management work overseas.
Engineers with a lot of experience in Japan respond in the following fields,
 Concrete bridge superstructure design
Plant
[Bridge design work results in Japan]
 Damage investigation, Repair design, Reinforcement design of existing bridges
 Superstructure design, Substructure design, Seismic design: Annual average number of bridges
 Concrete bridge superstructure construction management
handled; 200
Electricity,
We have the following design software and design in-house,
 Detailed investigation, Repair design: Annual average number of bridges handled; 200
 TDAPⅢ(Non-linear dynamic analysis of arbitrary structures)
 UC-BRIDGE (Placed girder structural design)
[Representative Bridge design work in overseas]
 MIDAS/Civil (Arbitrary bridge design, Seismic design), 50 other bridge design related software
Water
[Malaysia] Type: 9 span connecting T girder bridge
packages
 Responsible work: Load bearing capacity check
Maintenance
 Standards: BS
Repair,
 Various designs meet the design standards of the country.
 Language: English
 We help shorten the required period because we can handle design and construction all at once.
[Myanmar] Type: 9 span connection component bridge
 Specialized bridge engineers will be engaged locally.
Equipment,
Product
 Responsible work: Superstructure design, Drawings
 Standards: AASHTO LRFD
 In particular, we can accurately grasp the condition of the existing bridge and propose optimal repair
 Language: English
plans and preventive maintenance plans.
Boring
Work System
Experienced construction managers and investigators will be engaged locally upon request. Conditions for Using Technology
Please contact us. Steel bridges cannot be designed.
Waterproof
Design
21 22
Construction
General
TAPS – Al-Mg Plasma Arc Thermal Spray
Company Kawakin Core -Tech Co., Ltd. Establishment February 12, 2009
Road
Employees 167 Website http://www.kawakinct.co.jp/english Highly durable anti-corrosion protection system for harsh environments
Address 2-2-7 Kawaguchi, Kawaguchi, Saitama, Japan
Bridge
Name: Masayoshi OGINO International Business Title: Sales Assistant
Contact
Tel: +81 48-259-1117 E-mail: [email protected]
Overseas Branches Vietnam (Hanoi)
Tunnel
Possible Implementation Areas Worldwide (Main Area: Asia)
Business Overview
Port
Kawakin Core-Tech is a top Japanese manufacturer engaged in the development, design, manufacture,
and sales of seismic devices (seismic isolation and dampers), as well as structural bearings and
Improvement
expansion joints for bridges and buildings.
Ground
Achievements in Japan and Overseas Field Bridge construction Category Corrosion protection method
Registration, Jointly developed by three companies in Japan, including West Nippon Expressway
Awards Company Limited.
Piling
Technology Overview
TAPS is an advanced corrosion protection technology with high durability in which modified arc welding
Slope
equipment is used with compressed air to melt and project an aluminum and magnesium alloy wire onto
a steel surface to create a protective coating.
Plant
<Durability> In accelerated cyclic corrosion tests simulating marine environments, the results showed
that the Al-Mg plasma arc thermal spray coating is six times more durable than hot-dip galvanizing,
and it is capable of providing excellent corrosion protection under marine environments for more than
Electricity,
100 years.
<Cost savings> The maintenance cost is much lower than the conventional method, making it more
economical when considering the life cycle cost of the structure.
Water
<Applicability> TAPS can be applied to a wide range of steel parts such as high-strength bolts (including
the threads) without affecting their mechanical properties.
Maintenance
<Portable equipment> It is possible to apply the TAPS anti-corrosion coating directly at the construction
Repair,
site.
<Extensive track record> Critical bridge components such as bridge bearings and expansion joints in
Equipment,
Product
the Japanese highway system are protected against corrosion with TAPS. This technology has also
Work System been applied on bridges located in harsh environments in Bangladesh, the Philippines, etc.
 35% of the market share for rubber bridge bearings in Japan. Conditions for Using Technology
Boring
 Currently expanding international market share with a focus on Asia, Southeast Asia, and Africa.  Highly durable anti-corrosion coating especially suitable for coastal areas.
 Design offices in Vietnam and Japan to provide technical support and project-based designs.  Applicable to high-strength bolts to meet a variety of requirements.
 Plants in Vietnam (Hanoi Factory) and Japan (Ibaraki, Tsukuba & Sapporo) equipped with high-end  Provides superior corrosion protection for critical bridge components such as bridge bearings and
Waterproof
manufacturing and testing equipment to ensure the high quality of our products. expansion joints.
Design
23 24
Construction
General
High-density slurry type pipe jacking method
Company Yasuda Engineering Co., Ltd. Establishment 1975
Road
Employees 145 Website http://www.yasuda-eng.co.jp Technology for constructing sewage and other utility pipelines
by minimizing traffic impact on busy roads
Address 3-2-26, Shiogusa, Naniwa-Ward, Osaka City, 556-0024, Japan
Name: Shigero HAYASHI Construction Business Division Development Leader
Bridge
Contact
Overseas Branches Vietnam (Hanoi, HCMC), Korea (Seoul)
Tunnel
Possible Implementation Areas South East Asia (Vietnam, Myanmar, Indonesia)
Business Overview
Port
1. Pipe Jacking ・Ranking of Sales <Category of Pipe Jacking>
2. General Construction Within top 2 every year for specialized contractors High-density slurry type Showing project site in HCMC
3. Real Estate Business pipe jacking machine in Vietnam
・1st Japan Construction International Award (MLIT) SMEs category
Improvement
[Pipe Jacking]
Ground
Field Urban Tunnel Category Method
Technology for construction of urban tunnels with an inner diameter of 0.3 to 3.0 m. It is used for pipelines
such as water and sewage, gas, electric power, and telecommunications.
The RC pipe is connected to the follow-on of the TBM, and the tunnel is built by pushing it into the ground Technical Overview
with a hydraulic jack installed in the driving shaft. [Technical Features]
Piling
On roads where ground transportation and underground objections are congested, the social burden (Yasuda Engineering can handle slurry type, earth pressure type and small diameter pipe jacking.)
can be reduced compared to the cut and cover tunneling method.
High-density slurry type pipe jacking method consists of the following 5 technologies.
(1) Jyat method: Small diameter pipe jacking method which is equipped with high resolution CCD 1. High-density slurry is injected into the face, and it can excavate without moving ground surface while
Slope
camera and LED target can be curved construction. stabilizing the ground.
(2) Milling Mole Method: Milling Mole machine equipped with magnetic survey sensor, special bits and 2. Equipped with an air-type pinch valve, it can take into the machine up to a gravel diameter of about
hyperslow jack can cut and pass through steel obstructions like sheet pile or left RC pile in the ground. 1/4 of the machine diameter.
Won ISTT Award 2012. 3. By excavating with a slightly larger diameter than the outer diameter of the pipe and filling lubricant
Plant
Achievements in Japan and Overseas into the overcut portion, the frictional force with the ground is reduced, and long-distance construction
2013: Jakarta City, Indonesia “Ciliwung River Underground discharge Channel Project” of 500 m or more and sharply curved pipe jacking construction such as R30 m are possible.
φ3500 mm ΣL=1.3 km ×2 4. It can handle a variety of soils such as sand, gravel, and clay, as well as boulder formations such as
2015: Vietnam “Binh Duong Sewerage Project” φ300 mm ΣL=500 m
Electricity,
200 mm class.
2015: Ho Chi Minh City, Vietnam “Sewerage Project Package G” Tan Son Nhat
タンソンニャット国際空港
φ300 – 1800 mm ΣL=24.7 km International Airport 5. It can respond to direct connection to the existing structure or other various conditions.
2020: Hanoi City, Vietnam “Yen Xa Sewerage System Project PK-1,2” [Merits of Adopting Technology]
φ600 – 2200 mm ΣL=13.4 km  Even on roads with busy traffic, it can build a pipe without affecting traffic except for the shaft part.
Water
 As long-distance pipe jacking is possible, the number of shafts can be minimized, and the impact on
Area of Package G
パッケージＧ施工範囲 traffic can be further reduced.
Maintenance
 In cities in developing countries where ground transportation development is moving ahead and
Repair,
underground infrastructure development is lagging behind, business can be carried out while
suppressing economic and environmental losses due to traffic hindrance.
 Education on and transfer of construction methods and management technologies to local engineers
Equipment,
Product
Showing construction site Maintenance Factory and workers can be performed.
Work System [Video Link]
 50 Japanese Engineers were dispatched to Package G project at the peak, and about 80 Vietnamese http://www.yasuda-eng.co.jp/
workers were trained. Conditions for Using Technology
Boring
 Transported pipe jacking machines from Japan and set up maintenance factory in the suburbs of
HCMC.  Not applicable to urban tunnels with an inner diameter of 800 mm or less. Maximum size is up to 3000
 Slurry type machines of small diameter(φ300 – 600 mm) and high-density slurry type machines for mm.
φ800 – 2000 mm were transported to Vietnam.  Since the excavated soil is muddy with a high water content, it is necessary to secure an appropriate
Waterproof
 Local company was established in Vietnam. We trained Vietnam staff there and sent them to a project disposal site.
in Japan.
 At the same time, well-trained staffs and workers will be sent to third countries (Indonesia, Myanmar)  Difficult to construct in deep areas where groundwater pressures is above 0.25 Mpa.
to drive development of the business.
Design
25 26
Construction
General
Ultimate Method
Company Kidoh Construction Co., Ltd. Establishment 29 October 1946
Road
Employees 103 Website http://www.kidoh.co.jp/ The Ultimate Method makes it possible to excavate tunnels for an extremely long distance
and sharp curves with low propulsion power and high accuracy
Address 4-6-31 Fukushima, Fukushima-ku, Osaka-shi, Osaka, 553-0003, Japan
Bridge
Name: Mitsuo KARIYA Overseas Business Title: General Manager
Contact
Overseas Branches Indonesia (DKI Jakarta), Taiwan (Taipei)
Tunnel
Indonesia, Myanmar, Vietnam, Cambodia, Hong Kong,
Philippines, Malaysia, Singapore, Taiwan etc.
Supported Languages English, Bahasa (Indonesia), Chinese (e-mail only)
Port
Business Overview
1. Construction by pipe-jacking method for water, sewage and other lifeline pipelines (φ0.2 m〜φ4.0 m)
Improvement
Ground
2. Underpasses, utility tunnels, large boxes, shield construction
3. PC bridge construction
4. PC tank construction
Piling
5. Other civil engineering construction and other such work
* In 1948, we performed the first pipe-jacking work in Japan, and now have a track record exceeding
2,500 km in total. We have a top rank in the world, especially for long-distance and curve pipe-jacking. Field Pipe-jacking Construction Category Method
Slope
Kidoh Construction has the #1 domestic share for pipe-jacking work. 1994: CENPRA Curve System (Ultimate Method System) Received Technology
Registration,
Certification from Sewerage New Technology Promotion Organization.
Achievements in Japan and Overseas Awards
1995: CENPRA Curve System won NO-DIG Award.
 JAPAN: Total Jacking Length: More than 2,535 km (2018)
Plant
Total Water Storage Tanks: 1,010 units (2018) Technical Overview
1st Japan Construction International Award (MLIT) SMEs category (2018) [Technical Features]
 TAIWAN: From Incorporation in 2006, total pipeline length of 16,000 m (2019)  By utilizing a special widening ring and the ULTIMATE Lubricant Injection System (ULIS), it is possible
Electricity,
to jack an ultra-long distance of 1 km or more by reducing the peripheral resistance.
 HONG KONG: Expansion by Taiwan Kidoh Engineering from 2012
 Sudden-Curve line pipe jacking is realized by adopting the GYRO Compass and CENPRA Curve
 VIETNAM: φ1500 mm, 200 m×1 span (2008) System.
 INDONESIA: φ3500 mm, 570 m×2 span (2015), φ1800 mm, 260 m×1 span (2012) [Merits of Adopting Technology]
Water
 MYANMAR: φ1100 mm, 815 m×1 span: Bago River-Crossing (2019)  By making long distance, sudden-curve line pipe jacking possible and reducing the number of shafts,
the total cost is reduced and the project period is shortened.
Maintenance
 Reducing the number of shafts lead to a reduction in traffic congestion, reduction in social losses and
Repair,
reduction in carbon dioxide due to congestion.
 Improves road conditions (chronic congestion) in overcrowded urban areas in Southeast Asian
Equipment,
Indonesia Myanmar Taiwan
Product
countries.
Work System  Infrastructure development such as water and sewage that has been delayed due to rapid growth can
contribute to the development of local companies and the transfer of technology.
Past Track Record:
[Video Link]
Boring
 In Indonesia, we arranged equipment from Japan and dispatched up to 13 Japanese engineers, who http//www.kidoh.co.jp/
collaborated with local workers. Currently, two local engineers are being trained. Conditions for Using Technology
 In Taiwan, Japanese engineers and local workers jointly work in construction.
Waterproof
 Rocks, megaliths and other factors need to be considered for soil type.
 In Myanmar, jacking equipment and other items were shipped from Japan and 3 Japanese engineers  Need to pay attention to the quality of jacking pipe for long-distance or curved-line pipe jacking for
were dispatched, who collaborated with local workers. overseas projects.
Design
27 28
Construction
General
Unclemole Method
Company Name Iseki Poly-Tech, Inc. Establishment 1971
Road
Applicable to wide range of soil conditions, pipe types,
Employees 50 Website http://www.iseki-polytech.com and pipe diameters with the eccentric crushing system
Address Akasaka Community Bldg. 1-1-8 Motoakasaka, Minato-ku, Tokyo, Japan
Dept. of Construction Title: Section Chief Pipe Jacking Machine
Bridge
Name: Kazuhiro OKUDA
Contact Machinery Deputy
Tunnel
Possible Implementation Areas Indonesia and rest of the world (please consult with us)
Supported Languages English and Indonesian
Port
Business Overview
1. Manufacturer of Pipe Jacking Machines
Improvement
Operation Board Desandman
Ground
2. Pipe Jacking Construction
Field Jacking Construction Category Pipe Jacking
 Unclemole (please refer to the next page for details)
Japan Institute of Country-ology and Engineering (JICE): Certificate of
Piling
A proprietary system in which the cutter head of the pipe jacking machine rotates eccentrically to General Technology No. 402
crush cobbles while jacking, which is applicable to a wide range of soil. Registration, The International Society for Trenchless Technology (ISTT): No-Dig Award Winner
Easy operation with Reflective Steering Guidance (RSG) Awards (1992, 1995, 2016)
New Technology Information System (NETIS): CB030046
Slope
 Unclemole Shuttle Method (won the ISTT No-dig Award in 2016) http://www.iseki-polytech.com
A method suitable for modern urban areas where construction space is limited in which the machine
Technical Overview
is retrieved from the start shaft if it is not possible to construct an arrival shaft. [Technical Features]
Plant
 Unclemole Mini Unclemole was invented in the 1970’s as a slurry type tunnel boring method. More than 2,500 pipe
Construction from a small shaft is possible with split-start and the use of half-pipes. jacking machines with this method installed have been sold all over the world.
1. Applicable to wide range of soil conditions, pipe types, and pipe diameters
Electricity,
Achievements in Japan and Overseas Unclemole incorporates proprietary technology in the eccentric crushing system for the cutterhead on
Since our establishment in 1971, we have sold more than 2,500 pipe jacking machines all over the world, the machine head.
Unclemole is applicable to a wide range of soil conditions due to the eccentric rotation of the
and provided advanced pipe jacking technology.
cutterhead.
We have also introduced our technology to Asian countries where an increasing amount of pipeline 2. User friendly operation and maintenance
Water
maintenance is expected. For example, we have supported public work projects in Indonesia to install Unclemole incorporates RSG*. Operators who have never operated Unclemole before can easily
operate it.
pipelines. * RSG (Reflective Steering Guidance) is a device that uses a laser beam to confirm the direction of
Maintenance
Repair,
We will continue to contribute to Asia and other regions through underground construction technology. the machine head.
3. Safe operation with remote control
Work System
Operators can operate the pipe jacking machine safely, as the operation board is installed outside the
We dispatch our instructors at your request, to start shaft.
Equipment,
Product
provide instruction on machine operation and * Please consult with us so that we can propose a model that meets your construction and soil
conditions.
maintenance on site. [Contributions to Solving Issues]
We have local staff in Indonesia who can With the Unclemole method, public infrastructure such as water, sewage, gas, and telecommunications
Boring
can be provided to improve the living environment. Traffic congestion is minimized since this is a
provide support in Indonesia.
trenchless method.
Waterproof
 Pipes for jacking method: Hume pipes, steel pipes, resin concrete pipes, FRP pipes with internal
diameters of 200 mm – 3,600 mm
 Applicable soil: Wide range of soil from normal soil, sand and gravel layers, cobble layers, to soft rock
Design
29 30
Construction
General
MM Hole
Company CHIKEN ENTERPRISE Co., Ltd. Establishment 1980
Road
Speedy, Space saving, Safe Manhole Construction
Employees 111 Website https://www.ckn.co.jp/
Address 1-4-1 Bawari Kariya Aichi, 448-0810, Japan
Bridge
Name: KAMESHIMA Oversea section Title: Director
Contact
Tunnel
Possible Implementation Areas Southeast Asian countries
Supported Languages English, Vietnamese, Indonesian, Portuguese
Port
Business Overview
Pipe Jacking / Pipe Rehabilitation / Ground Improvement / Landslide Prevention / Machinery Leasing
Improvement
Nikkei Construction Sales Ranking (Pipe Jacking Category): 7th in 2017, 5th in 2019, 5th in 2020
Ground
*no data in 2018 Field City tunnels Category Method/Material
[Original Technology] Japan Construction Technology Certification (Civil engineering materials / products /
Registration,
(1) Speeder Path Method: technologies, road maintenance technology)
Piling
Awards
Examination number No. 0224
Compared to the conventional method, the speeder path method has the feature of being able to drive
forward in sand layers with a large amount of groundwater by 60 m or more. Technical Overview
In addition to high-precision starting, it is compatible with a wide range of soils and can be started from
Slope
a small shaft (φ1.5 m to φ2.0 m). The MM hole is a revolutionary multipurpose manhole construction method that is used for pipe jacking
Compatible with VP and VM PVC jacking pipes with a nominal diameter of Φ200 mm to 350 mm. shafts by directly press-fitting concrete into the ground by means of rotation.
Plant
(2) MM Hole Method: [Merits of Adopting Technology]
The MM hole method is a revolutionary multipurpose manhole construction method that is used for pipe  Cost savings due to shorter construction period
jacking shafts by directly press-fitting concrete materials into the ground with rotation. No need for earth retaining sheet piles. Therefore, the construction period is greatly shortened, and it
Electricity,
Since the reinforced concrete frame is directly press-fitted, there is no need for temporary earth retaining is cost saving.
nor to pull out the earth retaining sheet pile.  No need for cutting entrance ring
As a result, construction time and costs are significantly reduced. The entrance ring is pre-installed. (Applicable pipe nominal diameter: 500 or less)
Water
Achievements in Japan and Overseas  High-precision construction
2016: Pipe jacking work in Jordan (Northern Syria) All-around press-fitting machine (ART machine) enables installation without misalignment.
Maintenance
2018: Pipe jacking work in Jordan (Balqa Governorate) [Contributions to Solving Issues]
Repair,
2019: Pipe jacking work in Myanmar (Yangon Metropolitan Waterworks Improvement Project) Since there is little vibration and noise, it can be constructed in a short period of time even in urban
2017: JICA SME support project in Indonesia (Survey for Small Diameter Pipe jacking ) areas near underground buried objects and houses.
Equipment,
Product
2019: JICA SME support project in Indonesia (Dissemination of Small Diameter Pipe jacking ) [Video Link]
Work System https://www.nicovideo.jp/watch/sm4500929
 Since 2014, we are accepting technical interns and hiring construction engineers from Vietnam. Conditions for Using Technology
Boring
 From 2021, we are planning to accept Indonesian technical interns. It is applicable for a wide range of soil types. (For welded joints and non-welded joints)
Soil Type Scope Note
Note:
Sandy soil Ｎ≦50
Additional measures may be required in the following cases: Soil
Waterproof
Cohesive soil Ｎ≦30 with unstable excavation bottom, ground with low bearing capacity,
aquifer, consolidated clay and bedrock, etc.
Gravel soil Ｎ≦50 dim≦200 mm
Design
31 32
Construction
General
Jet-fan Inverter Control System JINV
Company Sohatsu Systems Laboratory Inc. Establishment 2000
Road
Employees 25 Website http://www.sohatsu.com/ Tunnel Ventilation Control System - Energy Saving, Fire Safety, Noise Free, Low Cost-
Address San-nomiya Denden Bldg. 64, Naniwa-machi, Chuo-ku, Kobe, 650-0035, Japan
Bridge
Name: M. WAKAMATSU Operations Department Title: Manager
Contact
Tunnel
Possible Implementation Areas Global
Supported Languages English, Vietnamese, Malay, Nepali
Port
Business Overview
[Target Systems]
Improvement
1. Road Tunnel Ventilation Control Systems
Ground
Jet-fan Jet-fan Inverter Control Panel DFSA (Noise Filter)
2. Road Traffic Monitoring Systems
3. Subway Ventilation Control Systems Field Tunnel Ventilation Category System
[Business] Registration, NETIS: KK-130014 Patent No. 5300775, Invention Award, Manufacturing Award
Piling
Planning/Analysis: Energy Saving, Maintenance, Fire Safety, Risk Analysis, Simulation Awards 13th ISAVVT Best Paper Award, JAPAN BLAND PROJECT (2019-2020)
Experiment: Field Test, Simulation Technical Overview

Research & Development: Software, Hardware, System Development
Slope
Manufacture & Construction: Sensor, Ventilation Control Panel, Jet-fan Inverter Control Panel, Sensor  Noise Filter DFSA: Independently Developed to Realize Jet-fan Inverter Control
Unit, Control Unit, Signal Unit  Reduce The Life Cycle Cost: Energy Saving-Over 30%, Versatility with Peripherals
Plant
Maintenance: Equipment, System, Data Diagnosis, Repair, Overhaul, Periodic Inspection, Remote  Emergency Ventilation Control: Safe Evacuation of Passengers
Maintenance [Merits of Adopting Technology]
Achievements in Japan and Overseas  Cable Length up to 2,000 m: Realized through Technology of DFSA
Electricity,
[Shipping Record]  Non Shielded Cable, Versatility Motor (Our Technologies): Shielded Cable, Special Motor (Existing
 Road Tunnel, Over 100 Jet-fans, Variable Speed Controller JINV (Japan) Technologies)
 Applicable to All Jet-fan manufacturers  Any Type of Jet-fans, Any Manufacturer
Water
 Market Share 100% (Variable Speed Controller, Japan)  Many Type of Simulations: From Planning to Maintenance
 JICA ODA PROJECT (Nepal, Philippines) [Contributions to Solving Issues]
Maintenance
[Evaluation]
Repair,
 (Development Country) Low Quality Air Environment in Tunnel (smoke density and air condition):
 13th ISAVVT Best Paper Award Optimization, Unstable power Supply. Energy Saving and low load Ventilation Control. Necessity of
 Certification (Japan) NETIS, JAPAN BLAND PROJECT, Invention Award, Manufacturing Award Localization (Cost and Technology).
Equipment,
Product
 PIARC Member of Tunnel Ventilation  (Mountains Areas) Higher Fire Risk (Steep Slope): Emergency Ventilation Control
 Collaborative Research (University of Engineering Hanoi, 2019-2023)  (Urban Areas) Complicated Structure and Long Length Tunnel (Need Higher Technology): Ventilation
Work System Control for Fire safety, and High Temperature Countermeasures.
Boring
 Research and Development Hubs (At University of Engineering Hanoi, Vietnam) [Video Link]
 Manufacture Base (Vietnam): All Asian Market (Save Cost, Local Price) http://www.sohatsu.tunneldb.com/
 Manufacture Model (Fabless): Local Partnership Conditions for Using Technology
Waterproof
 Core Technology (DFSA Filter): JAPAN Made (Credibility, Identity)  Two Way Traffic with Jet-fan
Design
33 34
Construction
General
Wave-dissipating Block “RAKUNA-IV”
Company NIKKEN KOGAKU CO., LTD. Establishment 1964
Road
New type of wave dissipating block with 4 hollows on the joint part of 4 legs
Employees 98 Website https://www.nikken-kogaku.co.jp/English/
Address 17F Nittochinishishinjuku Bldg., 6-10-1 Nishishinjuku, Shinjuku-ku, Tokyo 160-0023, Japan
Bridge
Name: Yosuke TOGA International Division Title: Manager
Contact
Overseas Branches Vietnam (Hanoi City)
Tunnel
Possible Implementation Areas East Asia, Southeast Asia, South Asia
Supported Languages English (e-mail)
RAKUNA-IV Breakwater for Chan May Port Breakwater for Nghi Son refinery
in Vietnam in Vietnam
Port
Business Overview
Field Ports and harbors, Fishing ports, Coasts, Rivers Category Products
1. Leasing and product sales of formwork for fabrication of wave-dissipating
blocks and footing-protection blocks NETIS: HRK-080001-VE
Improvement
Registration,
Vietnam National technical Standard: TCVN 9901: 2014, TCCS 02: 2017, TCVN 11736:
Ground
2. Leasing and product sales of formwork for fabrication of river revetment blocks, Awards
etc. 2017
3. Sales of Geosynthetics (Geotextile etc.)
4. Sales of fieldstone products Technical Overview
Piling
[Main Business Development and Activities in Overseas Markets] [Technical Features]
 Supply of formworks for fabrication of “wave-dissipating blocks” and “footing- 1. Compared to conventional products, the hollows and leg toes interlock with each other, which
protection blocks” suppresses damage transmission and improves wave-resistant stability.
 Dispatch supervisors to the site and provide technical guidance to construction 2. The hollows increase the surface roughness, which reduces the energy of the waves and improves
Slope
contractors the wave-dissipating effect.
 Business contract and technical support for hydraulic model experiments 3. The characteristic large hollows increase the porosity, reducing the number of blocks used, and
[Record of Awards] improving economic efficiency.
 May 2013: First Place Winner for “PIANC De Paepe-Willems Award” (first 4. There are many corners in the hollow, which helps the implantation and growth of algae, and the
tranquility of the hollow provides a habitat for marine creatures.
Plant
award in Asia)
Target technology: Breakwater reinforcement method “SUBPLEO FRAME 5. The formwork structure is simple, block fabrication is easy, and high-quality construction is possible
(SPF)” according to the guidelines for installation.
6. It is possible to design appropriately according to the construction site conditions by conducting
 June 2014: Second Place Winner for “PIANC World Congress in San Francisco, YP Award”
Electricity,
hydraulic model experiments.
Target technology: Concrete containing amino acid “Environmentally Active Concrete (EAC)”
 March 2019: Received “The 2nd JAPAN Construction International Award” SMEs Category [Merits of Adopting Technology]
 Compared to general wave-dissipating blocks overseas and those in Europe and the United States,
Achievements in Japan and Overseas the structure is flexible, resilient, and tough due to the high stability of the blocks and the double-layer
Water
Construction
installation method. Therefore, it is hard for the blocks to be destroyed and they have high safety.
Period
Project Name Procuring Entity Summary of the Construction  Since the number of blocks used is reduced due to the high porosity, the amount of concrete used
Pohang Regional Breakwater, Armor block for rubble can be reduced and the block fabrication/installation work period can be shortened. Shortening of the
South Korea: Pohang Young-il construction period will lead to reducing the burden on the environment.
Maintenance
2012 Office of Oceans and mound. Fabrication and installation work
Bay South Breakwater
Repair,
Fisheries of STONE-BLOCK 10t. [Contributions to Solving Issues]
Vietnam: Nghi Son Refinery and
Nghi Son Refinery
Breakwater, Wave-dissipating blocks. Constructing a highly safe breakwater in ports developed in developing countries reduces the risk of
2014 Petrochemical Complex Project,
Petrochemical Ltd.
Fabrication and installation work of stopping operation of the port. In addition, it is easy to maintain and can reduce maintenance costs, so
Route Neuve RAKUNA-IV 8t, 12t. the life cycle cost is excellent.
Equipment,
Product
Breakwater, Wave-dissipating Blocks. [Video Link]
Vietnam: Chan May Port Thua Thien Hue
2018 Fabrication and installation work of
Breakwater Construction Project province
RAKUNA-IV 16t, 32t.
https://www.youtube.com/watch?v=l_2F8pKIb0A
https://www.youtube.com/watch?v=qIJg3oFqjFg
Work System https://www.youtube.com/watch?v=ObNilXKyB1k
Boring
We do not contract for construction work directly, but manufacture formworks for the fabrication of wave-
dissipating blocks locally, such as in Vietnam, and supply them to the construction site after concluding
a contract with a construction company that includes the use of industrial property rights. Also, in order  We conduct hydraulic model experiments to determine the suitable type of breakwater (caisson
Waterproof
to ensure the quality of Japanese technology, we dispatch supervisors to the site at the start of breakwater, sloping breakwater) to make the appropriate design possible.
fabrication and installation of the blocks to provide technical guidance and advice directly to the  In addition to the design standards in japan, it is possible to design based on overseas standards
construction company, as well as guidance based on relevant manuals and guidelines. such as BS6349.
Design
35 36
Construction
General
JMM Method, Onoda FM Method
Company Onoda Chemico Co., Ltd. Establishment January 1923
Road
Methods for improving soft ground to achieve maximum effect with minimum equipment
Employees 344 Website http://www.saita-hd.co.jp
Address JPR Crest Takebashi Bldg., 3-21, Kanda Nishiki-cho, Chiyoda-ku, Tokyo, Japan Ground improvement (JMM method) Lightweight foamed mortar (FM method)
Title: General Affairs Dept.
Bridge
Name: Akira ENOSHITA International Business Division
Contact Manager
Overseas Branches Vietnam, Myanmar
Tunnel
Possible Implementation Areas Vietnam, Myanmar, etc.
Supported Languages English, Vietnamese, Burmese (e-mail only)
Port
Business Overview
We are a special construction company engaged mainly in ground improvement. Centering on design,
Improvement
Ground
sales, construction, testing, and technical development for ground improvement, we undertake the
following:
1. Ground improvement, lightweight material earthworks, and other specialized civil engineering work Field Civil engineering and architecture in general Category Methods, materials
as the main contractor or subcontractor Registration,
JMM method: former KT-030041-V, partially recommended for fiscal 2014
Piling
2. Design, estimation, and consulting for specialized civil engineering work Awards
3. Special concreting (manufacture, sales and repair of super-fast-setting concrete)
Technical Overview
4. Shield tunneling (backfilling, foam injection, eruption prevention, soil/sand transformation system,
Slope
etc.) JMM method:
Of all ground improvement, we are particularly good at solidifying soft ground with a cement-based ・ Combining concepts and experience of jet grouting and mechanical mixing, this method constructs
solidification material. We have diverse high-quality methods that we have developed independently, large-diameter (ø1.2–1.9 m) columns, making it suitable for all kinds of soft ground. The rod head and
thereby contributing to infrastructure enhancement and recovery from earthquakes both in Japan and work execution can be modified with different ones to enable the machine to access the displacement
Plant
object.
abroad in the fields of foundation work, seismic measure, liquefaction protection, and other measures ・ By a special travelling slide base machine with a boring machine is used to achieve high mobility, low
for structures. vibration and low noise. A self-travelling construction machine type is also available, which offers
Currently, we are working to expand our overseas business mainly in Vietnam and Myanmar. efficient construction.
Electricity,
FM method:
・ Cement milk or mortar is injected with foam produced with a special device to manufacture foamed
2006: Vietnam lightweight material.
Saigon East-West Highway Construction Project PK2 (JMM method) ・ Unit weight can be set freely between 0.5 and 1.2 kN/m2.
Water
To prevent of sliding of levee and shore bank, and to increase passive earth pressure, we carried out
JMM method:
from water floating barge. ・ Construction is now possible in narrow spaces inaccessible with large three-point pile drivers and in
On land, we executed the project to prevent the road embankment from subsiding. soft ground with low bearing capacity. Moreover, high-pressure jetting enables contact execution of
Maintenance
2015 to 2019: Vietnam each column, and can therefore be used to increase the earth pressure balance of retaining walls, to
Repair,
HCMC Urban Railroad #1 Construction Project, Zone 1B reinforce objects, and for many other purposes.
FM method:
(JMM method, FM method) ・ This method uses types of soil and sand more lightweight than those applied for embank, thereby
The FM method was used for the zone in front of the Opera House and the new building worksite for Ba reducing consolidation settlement due to rises in embank loads. Carried out with a highly flowable
Equipment,
Product
Son Station. material, this method can be used to fill cavities of certain sizes.
In the subway cut-and-cover zone, the bottom ground was improved with the JMM method. [Contributions to Solving Issues]
・ JMM method: Effective for ground improvement in urban districts and other areas with limitations on
Work System construction conditions.
・ FM method: Effective for consolidation settlement measure by offering a lightweight material for
Boring
 In 2016, an office was opened in Yangon, Myanmar. In 2017, a local subsidiary was set up in Ho Chi
Minh, Vietnam. embank in Southeast Asia, where soft marine clays are widespread.
 The HCMC Subway Construction, Zone 1b, was undertaken by 10 Japanese engineers and 20 Conditions for Using Technology
・ Inapplicable to areas with no cement supply. The FM method requires that an applicable foaming
Waterproof
Vietnamese workers.
agent be imported from Japan.
 We employed and trained HCMC resident personnel (2 Japanese and 2 local recruits) and personnel ・ In principle, the column diameter and strength for the JMM method should be set based on the results
who underwent practical skill training (4 local workers living in Japan). of in-situ trial tests.
Design
37 38
Construction
General
“CCC Method” Chain Conveyor Cutter Method
Company TENOX KYUSYU CORPORATION Establishment December 1987
Road
Ground improvement method - Excavates and Agitates Ground
Employees 160 Website https://www.tnx.co.jp/ by Rotating Scraper connected to Chain Conveyor (vertical direction)
Address 5F Kubara Honke Tenjin Bldg, 4-1-11 Tenjin, Chuo-ku, Fukuoka City, Fukuoka, Japan
Bridge
Name: Jin Yeonho Overseas Department Title: Assistant Manager
Contact
Overseas Branches Vietnam, Myanmar, Cambodia (Corporation), Korea (Branch)
Tunnel
Possible Implementation Areas South-East Asia, Korea
Supported Languages English, Korean
Port
Business Overview
We are a company that specializes in foundation work, centered on the ground improvement method.
Improvement
We have developed and attained vast technological capabilities to carry out foundation work to support
Ground
structures for both buildings and civil engineering structures. We have developed distinctive ground Earth retaining, impermeable work,
Field Category Construction Method
improvement methods (Teno-column method, Column Approach method, Multi-wall method, CCC ground Improvement work
method), piling methods (TN method, CMJ method), and steel piping methods (ATT column method, Registration,
NETIS registration number: QSK-120005-V
Awards
Piling
EAZET method) which are “Eco-friendly”. We are capable of providing a complete foundation work
system from engineering and procurement service to construction.
Technical Overview
Slope
1. We entered Vietnam in 2003 with the introduction of ground improvement technology (Teno-column 1. Direct stirring & mixing method: Capable of creating seamless improved ground even in different
method), and expanded this work as a widely used method for the building foundation and civil geological layers.
engineering fields. 2. Rectangular column: Effective improvement rate (practically 100%).
2. We have completed various projects such as ODA and private projects in Vietnam, Myanmar and 3. Able to improve the ground regardless of the hardness of the ground. → Able to penetrate & mix in
Plant
Singapore, and accumulated vast overseas experience as described below. ground with a maximum N value of 100.
1. Able to achieve consistent and uniformed improved ground as the work is performed in the vertical
Electricity,
direction with a chain conveyor cutter.
2. Can be installed even on ground with a support layer hardness of N value 100.
3. The amount of solidifying material (i.e., Cement), is reduced since the vertical chain conveyor cutter
ground improvement method is able to achieve uniform quality.
Water
When earth retaining and the foundation for the structure are both required, the earth retaining work can
be performed using the CCC (chain conveyor cutter) method, and with the same resources, the
Maintenance
Repair,
foundation work using the Deep Soil Mixing Method can be performed (only by changing the auger motor
attachment). This achieves an effective and productive combination.
Singapore, Thomson East Coast Line T228 Project Overseas achievements (mainly large-scale)
[Video Link]
3. We continue to conduct sales activities with a focus on Southeast Asia.
Equipment,
http://ccc-kyokai.com/index.html
Product
Work System
1. We have a dedicated team which provides foundation work in Vietnam with machinery, materials and [Conditions related to the natural environment]
skilled local staff. The Vietnamese manpower and resources are able to support work in the South-  Can be constructed under most weather conditions throughout Japan.
Boring
East Asia area. For projects in Singapore, we are able to coordinate manpower and materials from  Fall prevention measures for the rig are required in adverse weather conditions.
Japan and Vietnam to tap on the high technical skill and economic viability. This consists of the  Construction under freezing conditions requires mitigation measures to prevent freezing of water.
essential materials & engineers from Japan & skilled labor and materials from Vietnam. [Conditions related to Work Area]
Waterproof
 The footprint size of the machine, i.e. DH658 standard, is about 50 m2 (5 m x 10 m).
2. We can flexibly reconfigure resources to suit the construction conditions and technical difficulties we
 The plant, silo, pump & ETC installation area occupies around 200 m2 with a flexible configuration
may encounter on site.
according to the location of materials.
Design
39 40
Construction
General
MUDIX METHOD, POWER BLENDER METHOD
Company Honma giken Co., Ltd Establishment 1987
Road
These methods can be applied for soft ground and dredged soil
Employees 39 Website http://www.honmagiken.co.jp
Address 983-3 Teraji, Nishi-ku, Niigata-city, Niigata 950-1104, Japan
[MUDIX Method]
Bridge
Name: Akihiro ITO Engineering Department Title: Technical director
Contact
Tunnel
Possible Implementation Areas Vietnam (We have experience in field inspection)
Drilling→Soil carrier→Soil-gathering→Solidification→Curing→Carry out→Reuse
Port
Business Overview [PowerBlender Method]
We are a specialized contractor for construction industry and ground improvement work.
Improvement
e.g.: Soil stabilization, solidification of soft soils and construction of underground continuous walls
Ground
We own suitable machines and manage construction in-house as described below:
1. Ground improvement work
 Dry jet mixing method: 3 units (Maximum penetration depth: 33 m)
Piling
 GI column method (Single-auger deep soil mixing): 1 unit (Maximum construction depth: 24.5 m) Field Weak ground/soil treatment Category Method
 Double Mixing method (Single-auger deep soil mixing): 1 unit (Maximum construction depth: 10 m) Registration, Awards Power blender method NETIS: QS-180038A
 PowerBlender method (Shallow-middle Range Mechanical Mixing): 4 units (Maximum construction
Technical Overview
Slope
depth: 8 m)
 Compaction Grouting Denver-system: 4 units(Liquefaction counter measuring method) 1. MUDIX METHOD
2. Mud treatment work
This method continuously and efficiently mixes soft mud with stabilizing agent in a cylindrical mixing
 MUDIX method (Continuous mud treatment method) 1 unit
Plant
chamber.
3. Underground continuous wall construction work (Excavation Support wall/Water-cut off wall etc.) * Since the stirring efficiency is good and powder / granular material is used, the amount of stabilizing
 Trench cutting re-mixing deep wall method 2 units (Maximum construction depth: 60 m, Wall agent added is decreased and the strength is quickly developed.
Electricity,
thickness: 550 to 1000 mm)
 Safety and non-polluting: The agent is completely contained, and noise and vibration are minimized,
making it relatively safe.
[MUDIX method] processing capability: 100 m3/h [Contributions to Solving Issues]
Applications: To solidify and reuse dredged soil  This is an effective method for dredging/landfilling ports/rivers with reused-dredged soil.
Water
[ Video Link ] https://www.deidoken.gr.jp/
Past achievements for rivers and port in Japan:
 Ibaraki port Hitachi District, 3rd wharf 2. POWER BLENDER METHOD
Maintenance
 Second class river: Ishikawa River [Technical Features]
Repair,
This is a construction method in which soft soil is moved horizontally while stirring in the vertical direction
 First class river: Toyanogata River
while improving material is added to improve the ground.
ሾPowerBlender method] * By continuously stirring in the vertical direction, it is possible to improve the soil even in multi- layered
Applications: To improve soft soil in the original position or use
Equipment,
ground.
Product
pre-improved soft soil for embankments [Merits of Adopting Technology]
 Asahi Atsumi Road: Hihara area Improvement work No. 2 This method provides mobility even under difficult conditions with conventional mechanical agitation
methods, such as on narrow sites and sloping terrain.
 Niigata port, West port area: Embankment work for waste
Boring
disposal areas No. 7 and No. 8  This method can improve the ground in the original location and increase the ground strength around
 Oodori River: 3-year project for ground improvement work existing and new structures at a low cost.
Work System [Video Link] http://www.power-blender.com/
Waterproof
 Dispatch of Japanese engineers and technicians
None in particular. We will consider the detailed construction plan for each case and provide our
 Consider development of local human resources
response.
Design
41 42
Construction
General
MITS Construction Method CMS System
Company Murakamijuuki Co.,Ltd Establishment May 1962
Road
Ground improvement construction method that mixing efficiency is enhanced and base machine is
Employees 68 Website http://www.murakamijuuki.co.jp/ downsized by combining the special mixing blade and middle pressure injection of cement slurry
Address 515 Ikenobe Mikicho, Kitagun, Kagawa, 761-0701, Japan
Bridge
Name: Shusaku MURAKAMI Title: President
Contact
Overseas Branches Vietnam (Ho Chi Minh City)
Tunnel
Possible Implementation Areas Vietnam
Port
Business Overview Revetment Construction Construction from the barge
Murakamijuuki is a nationwide construction company, which is based in Kagawa, Japan and work as a
contractor for foundation works below, transportation and crane works mainly for public works contracted by
Improvement
Drawing of MITS method
Ground
the Ministry of Land, Infrastructure, Transport and Tourism (MLIT), local governments, etc.
1. Construction of cast-in-site diaphragm wall Field Ground improvement Category Construction method
2. Construction of ground improvement - Ministry of Transport: NETIS QS-000013-V, Technology of promotion of utilization in
3. Construction of pile driving and pile pulling 2011, Technology for comparison of design in 2012
Piling
In addition to our many achievements especially in cast-in-site diaphragm wall construction all over Japan, - Advanced Technology Center: Advanced Construction Technology and Technology
Registration,
we have an excellent track record overseas in special ground conditions including cohesive soil and Review Certification, Technology Certification No.2301 acquired on 20th September
Awards
2011
limestone. In November 2019, the ground improvement technology (MITS Construction Method) was
- Ministry of Transport in Vietnam: Technical Specification No.2163/QD-BGTVT issued on
developed in Vietnam, and was expected that it is highly suitable for the soft soil of Mekong delta region. The
Slope
18th November 2019
Ministry of Transport of Vietnam issued TCVN (Technical Standard in Vietnam) certificate to the technology.
We are aiming to receive local construction orders and build relationships with local partners. Technical Overview
Achievements in Japan and Overseas [Technical Features]
Plant
2011: Established Vietnam Office based on overseas expansion plan MITS method has features of both mechanical mixing method and jet-grouting method. It is the deep
2014: Participated in MLIT-led delegation to Vietnam mixing method that mechanical mixing blade drills and mixes, and simultaneously cement slurry is
“Feasibility Survey with the Private Sector for Utilizing Japanese Technologies in ODA Projects for injected with middle pressure under 15Mpa. It can create improved soil-cement column with high
Electricity,
Introduction of Soil Improvement Technology for Mekong Delta Waterway Revetment Construction” of uniformity in short time. The main features are shown below.
Japan International Cooperation Agency (JICA) a. By combining mixing blade and middle pressure injection, its base machine can be downsized, and
June 2016: “Verification Survey with the Private Sector for Disseminating Japanese Technologies for Soil improvement diameter can be increased.
Improvement Technology for Mekong Delta Waterway Revetment Construction” of JICA b. By combining mixing and injection, co-rotation of improvement ground does not occur, and
Water
December 2018: Trial construction was implemented in Vietnam displacement of surrounding ground is curbed.
November 2019: Ministry of Transport of Vietnam has issued TCVN (Technical Standard in Vietnam) c. Quality of improved soil-cement column is enhanced because of middle pressure injection mixing
certificate to the MITS Construction Method and forward/reverse rotation of mixing blade.
Tan Nhut Commune,
Maintenance
Binh Chanh District, Ho d. Increasing mixing efficiency, construction time is shortened. And advantageous in economic
Repair,
Chi Minh City efficiency is increased.
Trial site→ e. It can work flexibly to create improved soil-cement columns for middle-deep depth with low pollution.
Equipment,
Product
It can construct in the narrow site or from barge because machinery is downsized.
←Construction site
[Video Link]
Work System https://www.youtube.com/watch?v=guSQeYYc4fM
Boring
- It can create column with improvement diameter 500 to 1,600 mm for weak clay soil ground.
- In large sized construction which 2 axis type machines can construct without problems, construction
Waterproof
efficiency and economic efficiency become worse since the drill mechanism is one axe type.
- The construction method is dedicated for weak soil. (It is possibility that it cannot agitate and penetrate
when gravel or sand soil with high N value are in the soil characteristics)
Design
43 44
Construction
General
SST Association Inc. SST Method
Company SST Association Inc. Establishment 2001
Road
Employees 34 Website http//www.sstkyokai.co.jp Powerful compaction in both horizontal and vertical directions creates high-strength columns
Address 862-1 Yamadabashi, Ichihara, Chiba 290-0021, Japan

Compaction (Reverse rotation of the SST Auger)
Bridge
Name: Minoru KIKUCHI Tokyo Branch Branch Manager, Director of FC Businesses
Contact
Reverse rotation
Overseas Branches Vietnam (Hanoi) (under consideration) Pressure
Tunnel
Hydraulic excavator Injection of improved
Possible Implementation Areas Vietnam (under consideration) soil
Supported Languages English (e-mail only), Vietnamese Auger elevation
Reaction force Reaction force
Port
Auger
Business Overview elevation
Reaction force
Using the SST Method, a column-type ground improvement technology developed by SST Association  Improved soil and peripheral ground Simultaneous
Improvement
 Horizontal and vertical directions powerful compaction
Inc., we are engaged in the following business.
Ground
The SST Method in operation
(1) Development of technology related to the SST Method Field Ground improvement Category Method
(2) Training of engineers in the design and implementation of Registration, NETIS: KT-150002-VR / Building Technology Performance Certificate: GBRC
the SST Method Awards Performance Certificate No. 11-06 Rev. 3 (Mod. 1)
Piling
(3) Dissemination of the SST Method Technical Overview
(4) Contract work using the SST Method [Technical Features]
・ The dedicated auger is designed to excavate the ground efficiently in forward rotation and strongly compact
Slope
Achievements in Japan and Overseas and backfill in reverse rotation.
[Domestic performance] ・ The material for ground improvement is not just conventional cement-based solidifying materials; sand is
added for higher density compaction.
Over 1,700 ground improvement projects for building structures and civil engineering structures (April ・ The SST Method is not an underground agitation system, but a displacement system and work can be
Plant
2006 to March 2020) carried out while visually checking the excavated soil and the condition of the drilling hole from above
ground.
・ High-powered compaction creates high-strength, high-bearing columns, enabling a reduced total number
Electricity,
and length of columns.
・ As the work can be performed with compact equipment without the need for plant facilities, it can be done
in confined sites.
・ As the improved soil and surrounding ground are strongly compressed by compaction, there is basically
no surplus soil other than unsuitable soil.
Water
Apartment building Shopping mall Riverbank retaining wall ・ As the robustness by compaction is apparent immediately afterward, the curing period required with
conventional methods is unnecessary, resulting in a shorter work period.
[Surveys in Vietnam] ・ By carrying out the work with visual checks from above ground, the quality of the columns is improved and
Maintenance
the work can be managed certainly.
Repair,
 November 2017 to present: Field surveys, discussions with Vietnam Institute for Building Science and
・ The SST Method can be applied to soils such as organic soil and soft ground conditions outside the scope
Technology (IBST), FS survey (currently underway) of conventional methods.
 October 2018 to July 2019: Laboratory unconfined compression test using local soil conducted jointly [Contributions to Solving Issues]
・ Cost reductions and shorter work periods promote the development of housing and social infrastructures.
Equipment,
Product
with National University of Civil Engineering ・ The method is effective especially on confined sites where conventional methods are difficult and sites
Work System where the bearing capacity of piles is not required.
・ As the work can be performed with just a dedicated auger and a machine to power it, the method can be
 A team of 3 technical workers works with one set of equipment (dedicated auger, drilling and pole- introduced easily and at low cost.
Boring
erecting vehicle, hydraulic excavator). [Video Link]
https://www.youtube.com/embed/fsKgcNznaU0?rel=0
 2 Vietnamese employed as engineers are currently receiving in-house training. We plan to employ 3
more technical interns.
・ Improvement depth: up to 12 m, long-term ground contact pressure: 300 kN/m2 or less (if more, check by
Waterproof
 We are considering establishing a Vietnamese subsidiary and developing a work system for bringing static loading test)
in dedicated augers, etc. from Japan. ・ Minimum 2.5 m access path and 4 m × 10 m work space are required.
・ The distance from the neighborhood boundary to the center of the column must be more than 600 mm.
Design
45 46
Construction
General
1. KS-EGG Method 2. WILL Method 3. K-DPM Method
Company AOMI Construction Co., Ltd. Establishment 1917
Road
Employees 347 Website https://www.aomi.co.jp Advanced technical knowhow for marine civil engineering and soil improvement
Sumitomo Realty & Development Ochanomizu-building, 2-3 Sotokanda, 2-Chome,
Address 2. WILL Method
Chiyoda-ku, Tokyo, 101-0021, Japan 1. KS-EGG Method
Bridge
Name: Katsumi OOKORI Soil Improvement Department Title: Manager
Contact
Tunnel
Possible Implementation Areas Southeast Asian countries
Port
3. K-DPM Method
Business Overview
Our core businesses are marine civil engineering, land civil engineering, and soil improvement. We are
Improvement
Ground
one of the leading marine constructors in Japan, and excel in marine civil engineering and construction
of port facilities. We have been engaged in marine civil engineering and developed the land in Japan
surrounded by the sea since our foundation.
Piling
Marine civil engineering: Landfill dredging, port maintenance and breakwater construction
Field Soil Improvement Category Method
Land civil engineering: Roads, tunnels, water and sewage systems, river maintenance
Registration, 1. NETIS: KTK-180001-A
Soil improvement: Methods to improve soft ground (liquefaction countermeasures) Awards 3. NETIS: QS-090004-VE (Semi recommended technology 2019)
Slope
Technical Overview
Our soil improvement methods that suppress and prevent liquefaction, fluidization, and sandblasting
which occur during earthquakes include a density-increasing method that increases the strength of the
Plant
1. KS-EGG Method
ground and a method that solidifies the ground and suppresses underground stress. With our soil
The KS-EGG method is a low-noise, vibration-free SCP method on land.
improvement technology, we will reduce the impact of disasters and damage caused by earthquakes.
This is one density improvement method to improve the stability of the ground, such as increasing the
Electricity,
Link: https://www.aomi.co.jp/en/tech/index.html
bearing capacity of viscous ground as a measure against liquefaction of sandy ground.
2. WILL Method
[Domestic Achievements]
This method uses a special stirring blade attached to the tip of a backhoe type base machine to inject a
 Tokyo International Airport
Water
cement slurry into the soft ground while forcibly agitating and mixing in-situ soil to form a stable improver.
 Kansai International Airport This allows not only soft and viscous ground, but also sandy ground and gravel ground with an N value
 Chubu Centrair International Airport exceeding 30 to be accommodated, with a middle layer improvement of up to 10 m depth (Up to 13 m).
Maintenance
Repair,
[Overseas Achievements] 3. K-DPM Method
 Immersed Tunnel Foundation Work in Hong Kong and Macao The K-DPM method is one solidification method for the purpose of recycling dredged soil. A mixed
 Connecting Bridge (People's Republic of China) Hong-Kong Macao loading section is installed diagonally in the middle of the pumping pipe, and cement slurry is added to
Equipment,
Product
 Immersed Tunnel Foundation Work for Busan Port (Republic of Korea) Connecting Bridge the dredged soil that is pumped as plug flow from the solidifying material supply shaft installed in the
 Construction Work for Ehoala Port (Republic of Madagascar) center of the mixing section. By expanding the mixing section and installing it diagonally, a large turbulent
Work System flow is generated in the mixing section, enabling uniform mixing by means of stirring.
Boring
Please feel free to send us an inquiry.
Utilizing our know-how and achievements in marine civil engineering and soil improvement technology
over many year, we make contributions to infrastructure development and construction, especially in the
Waterproof
fields of ports and airports, reclaimed land and artificial island construction.
Design
47 48
Construction
General
JOG (Jacking on Grout) Method
Company Heisei Technos Co., Ltd. Establishment 1989
Road
An efficient way of releveling sunken or tilted structures
Employees 15 Website http://www.heisei1.com
Address 2-8-9 Hishie, Higashiosaka City, Osaka 578-0984, Japan
Development Department,
Bridge
Name: Tetsuya FUJITA Title: Development Leader
Contact Construction Division
Tunnel
Possible Implementation Areas Anywhere in the world
Port
Box culvert General housing - Before/After releveling JR tracks
Business Overview
 Subsidence rehabilitation and rectification Field Chemical grouting Category Construction method
Improvement
 Strengthening of ground bearing capacity NETIS registration number: KK-100010-A
Ground
Registration,
Ground Engineering Award from Kansai Branch of Japanese Geotechnical Society,
Achievements in Japan and Overseas Awards
2004
We have a long and proven track record in subsidence rectification, including releveling buildings and
other structures affected by the Great Hanshin Earthquake, Chuetsu Earthquake, Tohoku Earthquake Technical Overview
Piling
and Kumamoto Earthquake.
In addition to releveling structures affected by consolidation settlement of reclaimed land or soft ground [Technical Features]
or construction of adjacent buildings, in recent years JOG technology is employed as the standard  JOG is a jacking method using grout that eliminates the complex work processes required with more
method of releveling Japan Railways tracks, a task which requires advanced technical capabilities. traditional methods. This groundbreaking and efficient way of robustly releveling and rehabilitating
Slope
structures affected by differential settlement involves injecting a special grout through 20 to 40 mm
diameter holes at fixed intervals in an injection pipe installed in the foundation.
Plant
 JOG is a Heisei Technos patented technology that enables precision releveling to the nearest
millimeter of both light and heavy loads.
Taipei Public Library Taipei department store New Zealand art gallery NZ 7-storey apartment building
Electricity,
 JOG is not only highly effective for subsidence rectification, but also for rectifying differential
[Business Performance (orders received)]
settlement induced by soft ground or liquefaction. (The improvement effect is similar to that of the top-
Taiwan: Foundation improvement for Taipei Public Library Songshan Branch (June 2013), and other
works shaped concrete block foundation method.)
Korea: Construction and ground reinforcement of Smart Techno Tower and building restoration (July
Water
2016), and other works [Contributions to Solving Issues]
New Zealand: Releveling of Christchurch supermarket building (September 2013), and other works  Compared with demolishing and rebuilding structures, time and cost are greatly reduced.
UK and Europe: Various works since 2015  Work is completed in a short time even in factories, warehouses and other businesses that continue
Maintenance
Work System
Repair,
to operate while the work is under way.
[Taiwan]  Only the target structure can be restored without affecting the adjacent structures.
 The machines were stored in a local rental warehouse and 4 or 5 Japanese staff members were
dispatched as needed. Chemicals were exported from Japan when required.  JOG is a structure-friendly leveling method that applies no unreasonable localized force.
Equipment,
Product
 Assistant workers were employed locally for cement mixing and other jobs.
[Korea] [Video Link]
 Initially, in 2000 it was intended to send equipment from Japan and dispatch 2 or 3 employees to work http://www.heisei1.com
as contractors, but later it was decided that a local specialized construction company would purchase
the machines and the Japanese staff would receive a royalty as technical advisors. However, since Conditions for Using Technology
Boring
2004 domestic construction work in Korea has been outsourced to a local specialized construction  It is difficult to apply the JOG method if the foundation and piles are connected. (Depending on the
company.
situation, JOG leveling may be possible by cutting off the edge.)
[New Zealand]
 On the occasion of the Canterbury earthquake in 2011, Heisei Technos formed a business partnership  As the grout is injected immediately beneath the foundation, the foundation slab must be of a certain
Waterproof
with a construction company headquartered in Australia. width. (JOG is not suitable for continuous footing foundations.)
 Equipment was leased and, depending on the project, Japanese staff were dispatched as needed to
 The rigidity of the structure is maintained.
provide construction guidance.
Design
49 50
Construction
General
3SG Construction Method
Company Miho Technos Co., Ltd. Establishment July 30, 1958
Road
Employees 192 Website https://www.miho.co.jp Deep mixing treatment method with outstanding quality
and technology that supports ground safety
Address 25 Showamachi, Yonago City, Tottori, 683-0037, Japan
Land Support Division, Basic
Bridge
Name: Masakazu HASHIMOTO Title: Director
Contact Technology Office
Tunnel
Supported Languages Japanese
Foundation and reinforcement of buildings,
Port
structures and civil engineering, basics of Deep mixing, treatment
Business Overview Field Category
embankment, stabilization measures for method, slurry stirrer
1. General construction industry retaining walls
Improvement
Registration, GBRC Performance proof No. 07-21-2, Japanese Patent No. 4125310
Ground
2. Ground improvement work
Awards NETIS Registration No. KK-180052-A
3. Sales, brokerage and management of real estate
 No. 1 sales as local general contractor in Tottori Technical Overview
Piling
prefecture (2019) [Technical Features]
 Original technology (Belong to association) Construction scenery with 3SG Construction method With the mechanical stirring type deep mixing treatment method (Slurry stirrer), slurry discharge ports
3SG Construction method (Mechanical stirring type deep mixing treatment method) are provided above and below the stirring blade. Discharge is provided from below when excavating and
Slope
 Selection by Ministry of Economy, Trade and Industry Regional future leader stirring, and discharge is provided from above when pulling up and stirring. By discharging the slurry,
 Weekly diamond, 1,100 general contractors nationwide, No. 44 in "Momentum Construction this technology enhances the efficiency of improving the structure.
Company Ranking" in the "power to survive" ranking (December 2016) [Merits of Adopting Technology]
Plant
Achievements in Japan and Overseas  Quality improvement by improving the uniaxial compression strength of piles, and the process is
3SG Construction method shortened by improving the efficiency of structure improvement.
Electricity,
(GBRC Performance proof No. 07-21-2, NETIS Registration No. KK-180052-A)  Improved economic efficiency by reducing labor costs due to shortening of process, and achieving
Based on the deep mixing treatment method for which there are many achievements in the past, the construction in a narrower space.
3SG Construction method has been reborn as a higher quality method with new patented technology.  Because the slurry discharge port can be switched up and down, it is expected that variations in
Currently, there is strong demand for technological support in society, and acquisition of the GBRC strength can be reduced.
Water
Performance proof and NETIS reliable construction methods enables usage nationwide.  About 3 people per construction team, with no need for large-scale temporary construction.
* Completed 9,909 construction projects in Japan (As of November 2020) [Contributions to Solving Issues]
Maintenance
Repair,
 In narrow areas such as developed urban areas, ground improvement work can be done
 Buildings can accommodate houses and low-rise buildings (up to RC4F)
[Video Link]
Equipment,
Product
3SG Construction Method Association HP: http://www.sss-g.com/
NETIS HP: https://www.netis.mlit.go.jp/netis/pubsearch/details?regNo=KK-180052%20
Boring
Low-rise buildings Medium-rise building  Specifications: Maximum depth 20.5 m, Pile diameter φ400 mm - 1,300 mm
Work System  Not applicable for ground with many gravel layers and boulders, ground containing acidity and
sulfates, ground with strong groundwater, spring water, underground water or industrial waste, ground
Waterproof
We are training Vietnamese workers and engineers in Japan to respond to the shortage of workers in
Japan. In the future, we will promote and commercialize the 3SG Construction method with Vietnamese where underground obstacles have accumulated.
workers and engineers by establishing a local corporation and conducting training.
Design
51 52
Construction
General
Excavated mud and gravel recycling system (Pipe processing system)
Company Taiyo Kisokogyo Co., Ltd. Establishment May 3, 1958
Road
Ground improvement technology turns excavated mud and dredged soil into suitable material
Employees 221 Website http://www.taiyoukiso.co.jp
for embankments and banking
Address 107 Yanamori-cho, Nakagawa-ku, Nagoya, Aichi, 454-0871, Japan
Solidifying agent is
Bridge
Name: Toshiya MUTSUGA Sales & Marketing Division Director and General Manager Raw material is Pressure
added Stabilized soil
Contact brought in feeding
and mixed
Tunnel
Possible Implementation Areas Southeast Asia (Other areas will be discussed separately)
Port
Business Overview
Technical Overview
General construction
[Pipe processing system]
Improvement
 Special civil engineering work
Ground
Underground work (diaphragm walls, removal of underground obstacles, ground improvement, This highly efficient mixing system continuously mixes the excavated mud and dredged soil with powder
propulsion, contaminated soil treatment, geological surveys, etc.) or liquid additives inside the pipe during the pressure feed process. As the process is continuous with
Slope stabilization, solar power plant installation no inhibiting of the speed of the mud flow in the pipe, high-volume mixing is possible with light, compact
Piling
 Building work equipment. The system turns excavated mud, dredged soil, etc. into suitable material for embankments
or banking at the site.
[Principle of pipe mixer]
Slope
The gravel and additives are shear stirred and forcibly mixed by the agitator blades attached to the shaft
which rotates inside the pipe at high speed.
The additives are injected directly into the pipe mixer from the injection nozzle on the agitator shaft for
Plant
a highly efficient stirring effect. Gravel injection (Specific gravity adjusting device)
Pipe mixer
Diaphragm wall construction Slope stabilization
Electricity,
Additive injection
 Contract work (powder feeder)
Taiwan: Propulsion work (2 projects)
Water
Additive injection Agitator blade Agitator shaft
Dia.1800 mm mud density system L=276 m nozzle
Pipe mixer principle diagram Continuous
Dia.1000 mm mud density system L=300 m discharge of
stabilized soil
[Features of pipe processing system]
Maintenance
Democratic Republic of the Congo:
Repair,
Ground improvement work (1 project) 1. Continuous mixing enables large-scale processing with a compact system.
Deep mixing method 2. As the plant is movable, the cost of transporting mud, stabilized soil, etc. is reduced.
Dia.1000 mm L=5.1-7.1 m×403 columns 3. The additives are discharged by the pipe mixer shaft for an excellent agitating effect.
Equipment,
Product
 Technical guidance in diaphragm walls (TRD method) 4. The specific gravity of the stabilized soil is kept constant by the specific gravity adjusting device.
Tianjin, China
China (Tianjin, Shanghai, Wuhan, Qingdao/7 projects) Diaphragm wall construction 5. The powder feeder ensures high quality, stable kneading of powders.
USA (Florida/2 projects)
6. Both powder and liquid additives can be applied.
Boring
Work System
7. As the additives are supplied inside the pressure feed pipe, heavy metals can also be handled.
 Special machinery is brought from Japan and general purpose machines are procured locally.
 Construction managers, heavy equipment operators and machine maintenance instructors are
Waterproof
dispatched from Japan and human resources are trained through technical instruction for local  If the mixture contains pebbles, driftwood, waste, etc. bigger than 20 mm, sorting will be necessary.
workers.  The plant yard must be approx. 30 m × 50 m = 1,500 m2.
Design
53 54
Construction
General
Pile press-in method
Ozawa Civil Engineering and
Company Establishment June, 1913
Road
Construction Co., Ltd.
Noise-free and vibration-free press-in method that fundamentally solves the construction
Employees 54 Website http://www.ozawa-doboku.co.jp/ pollution that was previously inevitable for piling work.
Address 6 Morita Cho, Naka Ward, Hamamatsu City, Shizuoka Prefecture, Japan
Bridge
Name: Tomohisa OZAWA Title: President & CEO
Contact
Tunnel
Possible Implementation Areas Please ask.
Supported Languages Vietnamese (phone, e-mail), English (e-mail only)
Construction of revetments without Pier reinforcement under bridge girder Disaster restoration
Port
removing existing revetments
Business Overview
Disaster prevention, environment,
Ozawa Civil Engineering and Construction Co. Ltd. is a company with a history of more than 100 years Field Category Construction method
Improvement
transportation, flood control
which was founded in 1913. Since the introduction of the pile machine in 1957, we have specialized as
Ground
NETIS registration number: SK -190009 -A, SK -170006 -A Registered as GIKEN Ltd.
professional contractors for earth retaining and basic pile work (foundation pile work), and at present 2016 Japan Society of Civil Engineers Award for Technology “Underwater steel sheet
our primary business is in the field of ‘press-in piling’ using the Silent Piler ® manufactured by GIKEN Registration,
pile Press-in method in narrow space below railway bridge”
Ltd. With our highly experienced employees and a large variety of cutting- edge special machinery and Awards Rotary cutting press-in machine “Gyro Piler”: The fifth “Monodzukuri Nippon Grand
equipment, we have gained much experience and accumulated many achievements while successfully Award”, “Minister of Economy, Trade and Industry Prize”
Piling
facing various soil conditions, adapting to different working environments and fulfilling customers'
requirements, and have thus been highly evaluated. Furthermore, we became a GTOSS member and Technical Overview
acquired GM1 category classification offered by Giken Engineering Group in March 2014 in order to
contribute to the development of social infrastructure by making full use of special construction [Technical Features]
Slope
This noiseless and vibration-free pile driving method has fundamentally solved the construction pollution
technology. We are expanding the scope of our activities nationwide, centering on Hamamatsu City, caused by noise and vibration by using the press-in principle, which was inevitable with ordinary pile
Shizuoka Prefecture, which has been our base since our foundation. In addition, the locations where driving.
we can utilize the construction technology we have developed so far is not limited to domestic locations, Since the reaction force is obtained from the existing piles, the weight of the press-in machine itself is
and we are now actively developing activities for overseas projects. not required, enabling the construction machine to be made lightweight and compact.
Plant
Achievements in Japan and Overseas [Merits of Adopting Technology]
・ Can be applied to various field circumstances such as narrow areas, and under girders of bridges
Participated in Japanese Official Development Assistance project (The Kanchpur, where overhead clearance is restricted.
March 2017 Meghna and Gnmti 2nd Bridges Construction and Existing Bridge Rehabilitation ・ Vibration has little impact on neighboring buildings, so it is effective for construction in close proximity
Electricity,
-present: Project) in Bangladesh (Foundation for steel pipe sheet pile well (press-in to buildings in urban areas.
installation with steel pipe piler)) ・ By operating all machinery and equipment on finished piles, "construction without temporary work"
Established a joint venture in Hanoi, Vietnam (Through a joint venture of 3 can be realized, which eliminates the need for temporary work such as temporary piers and roads,
February 2019: enabling all processes to be completed on the piles alone.
companies including Hashimotogumi Corporation) ・ By adopting the press-in method, the total construction cost can be reduced by eliminating the
Water
January 2020 Earth retaining works (steel sheet pile press-in installation by Silent Piler) at Ben temporary structures required with the conventional method.
-present: Thanh Central Station on Ho Chi Minh Metro Line 1 (CP1a) ・ Safe without risk of overturning because the press-in machine is always held by the press-fitted pile.
・ Construction can be carried out without restricting the working hours even in areas where traffic is
Maintenance
heavy and putting restrictions such as road closures in place are difficult even at night.
Repair,
・ Precise control of press-in piles enables construction of complicated construction shapes with high
accuracy.
・ High-quality finished piles can be constructed by checking and controlling the performance of piles in
process.
Equipment,
Product
[Video Link]
https://www.giken.com/en/video_gallery/
https://www.giken.com/ja/video_gallery/
[Our Business Relationship with GIKEN Ltd.]
GIKEN Ltd. is a company that designs, manufactures, and sells Silent Piler ®, a pile press-in and
Boring
Work in in Bangladesh Work in Ho Chi Minh extraction machine, and holds various patents related to the press-in method.
Work System Ozawa Civil Engineering and Construction Co. Ltd. aims to popularize the press-in method in Vietnam
and other countries as a user, and GIKEN Ltd. supports each user in order to widely spread the method
In the above two projects, our employees were assigned to stay in the country to carry out press-in work throughout Japan and overseas.
Waterproof
(including welding work). In the future, we aim to build a human resource development system for
"globalization," which employs Vietnamese employees in Japan and assigns them to overseas
construction work after learning construction techniques which are accepted in the Japanese market. Please consult us.
Design
55 56
Construction
General
NB Piling Method (Inner Excavation with Vibro)
Name Nihon Base Co., Ltd. Establishment 1969
Road
Construction method that enables long pile construction and hard layer breakthrough, which
Employees 43 Website https://nihon-base.co.jp
was not possible with conventional steel pipe sheet pile and steel pipe pile construction
Address 4-22-6 Nishiogu, Arakawa-ku, Tokyo, Japan
Bridge
Name: Tatsuya KOMAZAWA Title: President and CEO
Contact
Overseas Branches Vietnam, Taiwan
Tunnel
Possible Implementation Areas Vietnam, Indonesia, Myanmar, Philippines, etc.
Available Languages English, Vietnamese
Port
Business Overview Field Bridge construction Category Construction method
NETIS: KT-160090-VE
1. Pile foundation construction business: Steel Pipe Sheet Pile, Steel Pipe Pile inner excavation Registration,
Ministry of Land, Infrastructure, Transport and Tourism Chubu Regional Engineering Bureau
Improvement
construction (NB method, Steel Pipe Pile hydraulic hammering method) Awards
Hokusei National Highway Director Award
Ground
2. Existing pile removal business: Large-diameter cast-in-place piles can also be removed, and the pile
Technical Overview
holes after pulling out the piles will be restored to a strength close to that of the original ground. [Technical Features]
3. Underground obstacle removal project: Double auger method, Delta method (Underground obstacle Technology for performing high-precision pile press-fitting by temporarily activating a low-noise, low-vibration NB
removal work using a special compact electric rotary all casing machine in a narrow area) vibro device when breaking through hard ground or soft rock ground while excavating steel pipe sheet piles and
Piling
steel pipe piles in the middle excavation.
2015: Indonesian Jakarta MRT construction PHC piling construction technical guidance ・ Prevents the following pile trouble that occurs with existing hammering methods and enables high-quality
construction.
2016: Indonesian Jakarta MRT construction PHC piling construction proposal 1. Buckling and breakage of piles, deformation and damage of joints in the case of steel pipe sheet piles in the
Slope
2018: Technical explanation to local government agencies regarding PHC piling construction in hammering method. → With the NB method, the inside of the pile is excavated and press-fitted while grasping
the ground condition using the ICT management device, so the pile and steel pipe can be press-fitted to the
Myanmar
support layer without damaging the sheet pile joint.
2019: Signed MOU with FECON (Hanoi), Vietnam regarding technical sales 2. With the hammering method, the pile bends when the stratum is inclined. → With the NB method, the verticality
Plant
In Japan, in the replacement work of the Ise Ohashi bridge over the Nagara River (ordered by the of the pile can be corrected during construction, ensuring high-precision verticality.
3. With the hammering method, the pile is damaged or stays high in the hard intermediate layer. → With the NB
Ministry of Land, Infrastructure, Transport and Tourism), the NB method was adopted to minimize noise method, even if there is a hard intermediate layer, it can be drilled and press-fitted without putting an excessive
for neighboring residents and not to hinder the swimming upstream of ayu, spawning, and the habitat of load on the pile, so the hard intermediate layer can be broken through and the long steel pipe sheet pile
Electricity,
fry. The construction was completed with a significant reduction in environmental load in the field construction of long steel pipe piles is also possible (pile length 100 m based on actual results).
・ Shortening of construction period / reduction of construction cost: If it is necessary to change the construction
environment under vibration and noise measurement, and was commended by the director of the method due to the above trouble with the existing construction method, it is necessary to consider additional
Hokusei Office, Chubu Regional Development Bureau, Ministry of Land, Infrastructure, Transport and auxiliary construction methods and additional construction costs. → NB construction method can avoid the
Tourism. above trouble risk, so from the beginning of design On-site support is possible at the top.
Water
・ Japan's newest pile foundation construction method with excellent earthquake resistance and durability: With
the NB method, piles are constructed while grasping the conditions such as ground hardness and integrated
excavation resistance value according to the depth by ICT management equipment. It is possible to construct
Maintenance
piles with excellent earthquake resistance and durability according to the situation.
Repair,
・ Prevention of river flooding in the rainy season: By adopting steel pipe sheet pile piers for the foundation of
bridges in rivers, the occupancy rate of the piers in the river can be reduced, and river flooding in the rainy
season can be prevented. Compared to the hammering method, the NB method is superior in vertical precision
construction of steel pipe sheet piles, so high-precision steel pipe sheet piles can be constructed.
Equipment,
Product
・ Consideration for environmental load and ecosystem: When piles are driven by the hammering method, loud
noise and vibration are always generated, which places a heavy burden on local residents and environmental
load. The NB Vibro of the NB method is a machine with low noise and low vibration, and at the same time, it
starts up in a short time (about 15 minutes a day on average), so the impact on the surrounding residents and
the natural environment is minimized. This minimizes the impact on fish swimming upstream and spawning in
Boring
Work System rivers, and minimizes the impact on the habitat of rare organisms and spawning of rare birds in forest areas.
・ 2015: Dispatched 4 Japanese engineers and trained about 50 Indonesian workers in Indonesia [Video Link]
https://nihon-base.co.jp/service1
・ Since 2017, hired highly-skilled personnel from Vietnam, and after a three-year training period, they Conditions for Using Technology
Waterproof
will play a leading role in local technical guidance ・ Suitable for construction of long steel pipe sheet piles and steel pipe piles.
・ In 2019, in partnership with Vietnam FECON, we plan to develop as a construction JV on a project ・ Low noise and low vibration. Consideration for local residents and the surrounding natural environment -Can
break through the hard intermediate layer. Compatible with soft rocks.
basis in Vietnam and Southeast Asian countries. ・ Excellent vertical accuracy of piles, suitable for construction of steel pipe sheet piles.
Design
57 58
Construction
General
Revolving casing and reverse circulation combined
cast-in-place pile construction method
Company Hassyu Kenki Co., Ltd. Establishment 1984
Road
Pile construction method that combines the advantages of both CD method and RCD
Employees 69 Website http://www.hassyukenki.com/
method
Address 17 Nishimabashisaiwai-cho, Matsudo-shi, Chiba, Japan
Bridge
Name: Nobuhito NOSAKA Overseas business dept. Title: Dept. Manager
Contact
Overseas Branches Vietnam (Hanoi, Ho Chi Minh city)
Tunnel
Possible Implementation Areas Worldwide
Port
Business Overview
Image 1 (Bangladesh) Image 2 (Bangladesh) Image 3 (Russia) Image 4 (Russia)
We are a contractor specializing in the contracting and construction of civil engineering foundation work
Field Cast-in-place pile (pier, elevated work, steel tower) Category Construction method
Improvement
and building construction.
Ground
[Main construction work] Implemented
Russia, Bangladesh, Vietnam
 Cast-in-place pile construction (RCD method, TBH method, CD method, JSHR method) Countries
 Steel pipe pile construction (NS eco-pile method, vibro hammer method, hydraulic hammer direct
Technical Overview
striking method)
Piling
 Obstacle removal work (CD method, BG method)  Pile foundation method that combines CD method and RCD method (Image 1)
 Cast-in-place pile construction and obstacle removal construction for height restrictions  The pile diameter is compatible with the RT machine, and the rotary table can be placed on the RT
 NS stud construction method machine for pile construction (Image 2).
Slope
[Owned original machine] [Merits of Adopting Technology]
RT200SL: Maximum weight 15.3t, Construction diameter Φ1000-Φ2000 mm, Low-height revolving  By using the casing like a stand pipe, it is possible to remove obstacles on the surface layer and
perform long-depth excavation at the same time, which leads to shortening of construction period and
casing machines MPD45, MPD25; SRD14 low-height reverse machines
reduction of construction costs.
Plant
[Overseas bases]  Even on hard ground where the stand pipe cannot be inserted, the casing can be easily press-fitted.
In 2019, established subsidiary company "HASSYU ASIA CO., LTD." in Vietnam.  The long depth casing will have the effect of preventing water, holding the soil, and guaranteeing the
Achievements in Japan and Overseas verticality with the RCD method.
Electricity,
1997: Construction of Pakse bridge in Lao People's Democratic Republic  Continuous and quick pile construction while removing existing objects and obstacles in the ground
(Image 3).
2005: Construction plan for TLY piles in Sakhalin
 Not only can be constructed on land, but also on barge in deep river and sea is also possible (Image
2006: Construction of Malawi bridge in Republic of Malawi 4).
2008-2010: Construction of bridge in the southern corridor between Mali &  By changing a normal bit to a roller bit or trochoid bit, soft rocks and boulders can also be excavated
Water
Senegal during long-depth excavation.
2008: Construction of piles for Sofia subway in Bulgarian Republic (upper  By combining with the JSHR method (BCJ rating-FD0546-02), expanded piles can also be created.
image) [Contributions to Solving Issues]
Maintenance
 Even in places where there are many obstacles caused by existing objects, natural disasters,
Repair,
2015: Construction of piles to reinforce Can Tho bridge in Vietnam
dumping, etc., piles of 100 m or more can be driven.
2017: Construction of Vam Cong bridge in Vietnam (lower image)
 Excavation can be performed without using Bentonite, making it a construction method that takes the
2016: Construction of Kanchpur bridge, Meghna bridge and Gumti bridge in surrounding environment into consideration (depending on the soil conditions).
Equipment,
Bangladesh
Product
2020: Construction of My Thuan 2 bridge in Vietnam  Applicable range of pile diameter: φ1000 - φ2800 mm, excavation length: - 100 m (Our actual results
We have many other achievements with numerous projects in Japan and with RCD method, only 120 m actual)
overseas.  In the case of hard ground from the surface layer to the pile bottom, it is necessary to remove the core
Boring
Work System by a separate auxiliary method.
 Excavation of sand, silt, clay, etc. can be expected to be carried out quickly.
We established associated company "HASSYU VIETNAM" in Vietnam in 2010, which trains Vietnamese  Soft rocks can also be excavated with roller bits and trochoid bits, but the overall construction speed
engineers and workers. Equipment such as CD machines and RCD machines is being brought from will decrease.
Waterproof
Japan and will be based at the HCM Equipment Center. We will expand to third countries with trained  Because a drilling fluid plant is required for reverse construction, it is not possible to perform
Japanese and Vietnamese supervisors. construction in a confined area (construction can be performed if a plant can be secured in the
vicinity).
Design
59 60
Construction
General
SY Method: Cast-in-place concrete expansion pile
Company Futaba Corporation Establishment 1970
Road
This is a construction method that can obtain a large bearing capacity by excavating the
Employees 50 Website http://www.futaba-311p.com/ expanded bottom section to more than twice the diameter of the shaft section
Address 2-10-15 Tamagawa, Setagaya-ku, Tokyo, Japan
Bridge
Name: Konosuke KAMIDO Title: Director
Contact
Overseas Branches Ho Chi Minh City, Vietnam
Tunnel
Possible Implementation Areas Southeast Asia
Supported Languages Vietnamese
Port
Business Overview
1. Cast-in-place pile construction
Improvement
2. Ready-made pile construction
Ground
3. Underground obstacle removal work Field Construction work Category Construction method
◇Certified Method Registration,
BCJ Rating-FDO345-05, The Building Center of Japan
[SY Method] Awards
Piling
With the SY Method, it is possible to obtain a large bearing capacity by excavating at least twice the Technical Overview
diameter of the shaft. Since the amount of excavated soil and ready-mixed soil can be reduced, it leads [Technical Features]
to a reduction in cost. ・ A mechanism with a maximum inclination angle of 16° miniaturizes the enlarged bucket. Compatible
Slope
[STBC-SR II Method] with small excavators and reaction equipment.
・ Manage reliably with the mechanical limit function by the expansion wing restriction stopper.
The cast-in-place steel pipe concrete pile method is reinforced with a steel pipe that has internal
Plant
protrusions by welding molding on the part where a large bending moment or shearing force acts, such ・ Since it is possible to excavate more than twice the diameter of the shaft, a large bearing capacity
as the head of a conventional cast-in-place concrete pile. can be obtained.
・ With the SY method, the same bearing capacity as a conventional straight pile with a diameter of 2.2
Electricity,
m can be obtained with a shaft diameter of 1.0 m and a bottom expansion section of 2.3 m. In this
2010: New construction project for Japan Coast Guard, Hydrographic and Oceanographic Department case, the amount of concrete used for the pile will be reduced to 1/2 to 1/3, the amount of excavated
2011: Kainan Municipal Hospital New construction project earth and sand will be reduced to 1/4 to 1/5, and the cost of foundation pile construction can be
2012: Dairoku Junior High School in Bukyo-ku Reconstruction project reduced. Since it is possible to excavate more than twice as much, it is possible to obtain a large
Water
bearing capacity.
2014: Seismic evacuation center construction project, Nuclear Science Research Institute
2014: Disaster public housing construction project, Nango, Kesenmuma City ・ Due to its high versatility, it is possible to utilize earth drilling machines that are already widespread in
Maintenance
2014: Nuclear safety engineering research center construction project, Nuclear Science Research each country, and the technology can be easily introduced.
Repair,
Institute ・ Since no special hydraulic system is required, it can be used at many foundation pile construction
sites.
2014: Category 1 urban district redevelopment project in front of Koujiya Station [Video Link]
Equipment,
Product
2015: Soka City Hall second building construction project http://www.futaba-311p.com/movie/index.html
2017: Nagaura office building new construction project (28)
2017: Yotsuya Police Station reconstruction project (28), Metropolitan Police Department
Boring
2020: New construction project, part of Museum of the Imperial Collections development project
Work System
 10 head office employees, 40 field technicians
Waterproof
The size of the bottom expansion bucket that can be used depends on the size of the earth drilling
 November 2019: Employed Vietnamese engineers (office work)
machine used.
 January 2020: Employed Vietnamese engineers (site management)
Design
61 62
Construction
General
L Mole Method (Standing pile)
Company Endo-Ecoraise Co., Ltd. Establishment April 30, 1975
Road
Vibrationless Low-noise Machine, Standardized work, Reduces construction work period
Employees 50 Website http://www.endo-er.co.jp
Address 6-27-16 Nishiarai, Adachi-ku, Tokyo, Japan
Bridge
Name: Tetsushi SAITO Department: Construction Title: Director
Contact
Tunnel
Supported Languages
Port
Business Overview
[Standing pile construction] LMV2000R All-around Machine Hard bit
Improvement
 Steel pipe (φ900 mm - φ5000 mm) L-Mole Method
Ground
Field Sewage system, City Gas, Obstacle removal, Obstacle removal
 Steel sheet pilings (Hard soil possible)
[Propulsion work] Technical Overview
[Liquefaction countermeasure work] [Technical Features]
Piling
 Groundwater lowering method (Gaiamole Method)  Excavation by workers and soil retaining are not needed, enabling safe construction.
[General civil engineering work]  Excavation and soil retaining are performed at the same time.
Slope
Achievements in Japan and Overseas  Press-in machine and excavator are integrated type, and self-propelled movement and installation
2016: Great deep standing pile, Tokyo sewage work station order can be performed easily.
Pile dia,: φ2590 mm, Depth: 26.2 m, Soil quality: Sandy earth (N≧50)
Plant
2017: Second-grade river, Disaster recovery, Unosumai floodgate construction [Merits of Adopting Technology]
Steel pile (IV×15M), hard soil (N≧300)  Construction period and construction costs can be reduced since no supplementary construction work
2017/18: Liquefaction countermeasure work, Chiba-order is needed.
Electricity,
Standing piles: 137 (φ1500 mm - φ2500 mm), Propulsion length: 5,733 m  A lot of works are standardized or eliminated compared to conventional construction techniques.
 Even unskilled workers can build safely with high quality.
Water
 Effective for city engineering by using propelled work (reducing road traffic obstacles).
Maintenance
 Can be used for various types of work, depending on the concept.
Repair,
 Restricted to less than 6 m in height
Equipment,
Product
φ3000 standing pile Disaster recovery (steel pile) Liquefaction countermeasure work  Soil exploration is needed.
Work System
We employ 8 technical intern trainees (including specified skilled workers) from Vietnam and
Boring
Myanmar, also an engineer who graduated from Ho Chi Minh City University of Technology will join us.
We intend to expand our business to overseas by developing human resources and technique
succession.
Waterproof
Design
63 64
Construction
General
Noise prevention device for pile driving work
and construction management by IT
Company Marutai Doboku Corporation Establishment 13 December, 1962
Road
Employees Employees: 130, Workers: 180 Website https://marutaidoboku.co.jp/ Device that can secure reliable bearing capacity using the impact hammer method
without being bound by noise regulations
Address 3-5-17 Kitakasai, Edogawa-ku, Tokyo 134-8631, Japan
Image diagram of noise prevention mechanism
Bridge
Name: Shizuo TANIMOTO Technical Division Title: Manager
Contact Hydraulic * Arrow in the figure indicates
Tel: +81-3-3689-4111 E-mail: [email protected] impact hammer the volume and direction
of noise.
Overseas Branches Philippines (plan) Driving surface
Tunnel
Possible Implementation Areas All over the world Steel pipe pile Upper soundproof room
Supported Languages English ,Vietnamese ,Tagalog ,Thai ,Spanish Lower soundproof room
Port
Business Overview
Noise prevention device: ECOHOUSE “OTONASHI-KUN” Sampling Moire camera and PC for
1. Pile driving/extraction control, recording and drawing
Improvement
2. General civil engineering
Ground
3. Sales and repair of construction machines Field Foundation construction Category Equipment and systems
Our main work is foundation work, consisting of steel pipe sheet driving work and steel pipe pile driving Noise prevention device:
work. We also remove underground obstacles. We have various large machines such as a large Japan Patent Office: Patent No. 6585755 registered on13 September, 2019
Registration,
crawler crane (500t) and large hydraulic impact hammer. We can handle larger and more diversified Center for Environmental Information Science: Technology Development Award in 2019
Piling
Awards
construction work with our newest technology. The Institute of Noise Control Engineering of Japan: Environmental Design Award in 2019
[Original Technology] Pile stop management method: NETIS KT-190085-A registered on 26 November, 2019
(1) Noise prevention device which can decrease the noise of driving piles by hydraulic impact hammer:
Technology Overview
Slope
ECOHOUSE “OTONASHIKUN”.
(2) IT construction management device which can make “driving pile management chart”, “measurement [Technical Features]
record of pile penetration amount” on time by using high-speed camera and automatically measuring 1. The effectiveness of the noise decrease is very high (Can be used for construction under the same noise
level as the ordinary low-noise method)
the penetration amount and rebound amount at the site several tens of meters away from the pile.
2. Installation and removal are easy (Can be used for bulk installation and to ensure the stability only by
Plant
Achievements in Japan and Overseas placing)
3. Condition of pile driving can be confirmed from the outside (Installation of hydraulic impact hammer and
We started overseas projects from 1971.
stop driving work can be performed from outside of the device)
We have achieved 47 projects in 27 countries.
Electricity,
4. IT construction management device enables drawings to be created on time and cessation of driving work
2009: Mexico “Manzanillo LNG terminal” to be confirmed.
Steel pipe pile φ600 – 1200 mm Lmax=38 m Qty. 368 [Merits of Adopting Technology]
Mexico
2015: Solomon Island “Improvement of Honiara Port facilities” The “Impact hammer method” needs only a few machines and the process is simple in comparison with other
Steel pipe sheet pile (Wall) φ600 – 900 mm Lmax=40.5 m Qty. 169 construction methods. It is a very effective method to gain reliable bearing capacity because the resistance
Water
2016: Vietnam “Binkain Bridge North South Highway construction (part J1)” of ground penetration can be confirmed through the pile during striking.
Noise prevention device: ECOHOUSE ”OTONASHI-KUN” achieves this excellent construction method at
Steel pipe sheet pile (Wall) φ1500 mm Lmax=63.5 m Qty. 162
Solomon Islands construction sites subject to noise restrictions. In addition, the use of an IT construction management device
Maintenance
allows the collected and processed data to be utilized on site. This ensures a more reliable and stable
Repair,
2016: Bangladesh “Construction of Kanchupur, Meghana, Gumti 2nd Bridges foundation.
and Rehabilitation of Existing Bridges (Package No. PW-01)” [Contributions to Solving Issues]
Steel pipe sheet pile (Wall) φ1000 mm Lmax=78.0 m Qty. 1125 ・ Construction can be performed in areas with strict noise restrictions near residential areas and hospitals
Equipment,
Bangladesh etc. by reducing the environmental load because of the decrease in noise.
Product
・ Controlling construction data on time makes it easier to perform process management.
Work System ・ This system is very suitable not only for the public facilities which need the details of measured values and
・ We have construction achievements almost all over the world including Asia, Africa, Middle East and records but also for huge structures with large quantities of data.
[Video Link]
Latin America. We can transport pipe driving machines and dispatch Japanese engineers. As of
Boring
Overseas construction achievements: https://marutaidoboku.co.jp/works/14.html
December in 2020, we have projects under construction in Cote d'Ivoire, Bangladesh and Uganda.
・ We are planning to establish a branch in the Philippines in 2021. Video introducing ECOHOUSE “OTONASHI-KUN” ECOHOUSE “OTONASHI-KUN”→
・ In the future we will train the Filipino engineers, and we will promote the localization of branch https://marutaidoboku.co.jp/download/aerial_im introduction video QR-code
Waterproof
operation and build up the construction organization with high mobility. Conditions for Using Technology
No special conditions.
Design
65 66
Construction
General
Greening sheet for slope protection
Company RONTAI CO., LTD. Establishment 1957
Road
Our technology helps to enhance slope greening and prevent slopes
Employees 125 Website https://www.rontai.co.jp from collapsing by simply covering the surface with a rolled up sheet
Address 3-1-11 Kinda-cyo, Moriguchi-shi, 570-0011, Osaka, Japan
Bridge
Name: Yuji SHINUNE Overseas Business Department Title: Department Manager
Contact
Overseas Branches Vietnam (Hanoi), China (Dalian)
Tunnel
Possible Implementation Areas Vietnam, South East Asia
Port
Business Overview
1. Slope greening protection technology
Improvement
2. Development, manufacturing and sales of slope protection 2.
Ground
products
Field Slope planting (Slope protection) Category Product
3. Design and construction of slope protection technology
[Original Technology] Registration, Awards NETIS: KK-120016-VE
The proposed product is a sheet consisting of a non-woven
Piling
fabric that contributes to the drainage of rainwater, a water retention Technical Overview
agent and a layer of seeds and fertilizer that contribute to the [Technical Features]
greening of slopes. Contributes to the greening of slopes and prevention of disasters by attaching sheets that combine seeds
Slope
In South East Asia, the precipitation during the rainy season often and fertilizer
 Drainage function (Non-woven fabric and water retention agent helps to drain water)
exceeds 100 mm/h. Even when a rainwater drainage test was
 Sediment outflow prevention function (The product absorbs water and becomes heavier, which helps
conducted with a standard precipitation of 180 mm/h, it showed that Product structure
to prevent sediment outflow)
Plant
our proposed technology helped to drain 85% of rainwater.  Greening function (Since our sheets contain seeds and fertilizer, slope surfaces can be greened in
Achievements in Japan and Overseas around 2 months)
April 2019: Establishment of representative office in Vietnam  Simple construction process (Construction can be easily done with only a hammer and scissors)
Electricity,
October 2017: Construction of 300 m2 industrial complex in Indonesia  Since the construction process is very easy and fast, our technology saves much more time compared
November 2018: Construction of 600 m2 Indonesian church to the seedling planting method.
September 2019: Construction of 250 m2 National landfill in Palau  Stable quality since product is manufactured in a factory.
February 2020: Widening of 200 m2 Indonesia church [Contributions to Solving Issues]
Water
 3 main functions of Quilket (drainage function, sediment outflow prevention function, greening
March 2020: Construction of 3,500 m2 National landfill in Palau
function) enhances erosion prevention effects, reducing damage due to heavy rain. In this way, our
November 2020: Slope construction for 200 m2 reservoir in Vietnam product helps to reduce damage caused by natural disasters.
Maintenance
 Previous construction methods often failed for slope greening, which leads to reconstruction. With
Repair,
Quiklet, the initial cost may be higher compared to previous methods, but there is no need for
reconstruction, which helps to reduce the total cost efficiently.
[Construction Process]
Equipment,
Product
Boring
Vietnam: Slope construction for reservoir Indonesia: Construction of industrial complex
Work System
 Since the construction process is very easy to follow (with procedure manual), local construction Conditions for Using Technology
Waterproof
worker can perform the job.  Note: Rock greening is not possible
 When necessary, instructions can be provided through a video call.  Seeds used for construction must be examined.
Design
67 68
Construction
General
Erosion Control Mat “Takino Filter“
Company Takino Filter Inc. Establishment June 6, 1994
Road
Employees 49 Website http://www.takino.co.jp/ Takino Filter is an erosion control mat that protects the soil from various environmental conditions
Address 2-904-16 Hayama, Kudamatsu, Yamaguchi, 744-0061, Japan
Bridge
Name: Kenji FUJII International Business Division Title: Section chief
Contact
Tunnel
Possible Implementation Areas Southeast Asia, West Asia, Central and South America, Oceania
SP-45 SP-45wn
Available Languages English, Spanish, French
Just after construction 7 years later
Port
Business Overview Field Slope construction work Category Materials, Products
1. Manufacture and sales of “Takino Filter” soil conservation and greening materials NETIS registered technology (CG-980018-VE)
Registration,
Construction Technology Review and Certificate (No. 0106)
Improvement
2. Investigation of soil and vegetation, and design and construction of “Takino Filter” materials Awards
Ground
Registration of UNIDO Sustainable Technology Promotion Platform (STePP)
What is the “Takino Filter”?
It is a slope protection mat with an erosion control function which was developed with the aim of Technical Overview
creating a vegetation base by itself. It mainly consists of non-woven fabric (web) made of randomly [Technical Features]
Piling
1. Prevents slope and soil erosion caused by heavy rainfall and controls muddy water.
entwined polyester short fibers and is reinforced with a polyethylene net. The web with a porosity of
2. Heat keeping effect prevents erosion caused by freezing and melting in cold regions.
97 to 98% allows the free flow of air and water and protects the soil from any changes in the
3. Covering effect of the mat prevents blown sand in high wind areas.
environment.
Slope
4. Can be applied to the submerged surface of dam lakes etc.
Currently, the new category of "Construction Method with a Vegetation Mat for Erosion Control" has
5. Has the water retentivity, preventing soil from drying out.
been established in the public works of Japan and the “Takino Filter” is registered.
Plant
 Because it is a standard product, the quality is uniform and handling is easy.
2012: Indonesia, "Potential Survey for Development and Wide Deployment of Technologies” by Ministry  No spraying machine is required, so anyone can easily install it.
Electricity,
of Foreign Affairs of Japan  It reduces CO2 emissions and doesn’t create dust, noise or muddy water during construction.
2013: Indonesia, "Pilot Survey for Disseminating SME’s Technology” by JICA  It can be used in combination with slope spraying work.
2016: East Timor, "Asian Development Bank Road Network Improvement Project" 2,000 m2  It enables greening with mainly local plants and leads to permanent greening.
2017: Indonesia, “GIIC Japanese Industrial Park Slope Improvement Work” 38,500 m2  Total cost including maintenance is suppressed, achieving high cost effectiveness.
Water
2018-2019: Philippines, "TCP-III Pilot Project Slope Protection Work” by JICA 4,650 m2 [Contributions to Solving Issues]
2018: Honduras, "Landslide Prevention Work in National Road No. 6” by JICA, 2,630 m2 Because the slope can be protected for a long term after construction, the risk of slope disasters due to
Maintenance
Repair,
2019: El Salvador, "Landslide Prevention Work” by ODA/JICS, 6,000 m2 environmental stresses such as heavy rains during the rainy season and/or climate change is reduced.
Furthermore, greening also contributes to the reduction of CO2 emissions.
[Video Link]
Equipment,
Product
Product introduction: https://www.youtube.com/watch?v=TVjmrDybzDI
Construction method: http://www.takino.co.jp/manual.html
Boring
Restoration of devastated land on Mt. Batur, Bali, Indonesia  Dynamically stable slope
 Soil conditions: Fill soil, cut soil, sandy soil, clayey soil, soil with gravel, various hard soils
Work System
Waterproof
We mainly export our products through Japanese distributors which have overseas sales offices.  Slope angle: If greening is required, the maximum slope angle is 60 (Actual result is 73)
 It is difficult to install on uneven slopes where it cannot be attached close to the surface.
We provide construction guidance to local contractors, but we do not directly perform construction.
Design
69 70
Construction
General
1. Rockfall Countermeasure
2. Bridge Cable
Company TOKYO ROPE MFG. CO., LTD. Establishment April 1887
3. Carbon Fiber Composite Cable (CFCC)
Road
http://www.tokyorope.co.jp/
Employees 1,766 Website
https://tokyorope-intl.co.jp/
Civil engineering using cable and wire technology (design, fabrication, installation)
Address 3-6-2 Nihonbashi, Chuo-ku, Tokyo 103-8306, Japan
Bridge
Name: Takuya AKIBA Engineering Division Title: Manager of Sales Group
Contact
Overseas Branches USA, Kyrgyzstan, Philippines, Russia, Kazakhstan, China, etc.
Tunnel
Possible Implementation Areas All over the world
Supported Languages English, Russian
Port
Business Overview
Tokyo Rope is a leading company in the wire rope industry (wire rope and wire business).
Improvement
Ground
Our six major business segments are shown below, which include cable systems for long span bridges
and rock fall prevention/snow damage prevention products.
Piling
Rockfall countermeasure, bridge cable,
Field Category Material, product, installation
reinforced material against salt damage
Slope
Registration, Rockfall countermeasure: Philippine DPWH "Blue Book" accreditation
Awards Carbon fiber composite cable (CFCC): AASHTO certification
Technical Overview
Plant
1. Rockfall countermeasure: Rich and long experience in Japan, variety of products, high quality and
Electricity,
performance (long life, low maintenance)
2. Bridge cable: Prefabricated main & hanger cable for Akashi straight bridge and others
Rockfall Countermeasure: Philippines (Client: DPWH), Russia, Kazakhstan etc.
3. Carbon fiber composite cable (CFCC): Reinforcing materials used in coastal areas subject to salt
Suspension/Cable Stay Bridge Cable: Turkey "Osman Gazi Bridge" (Izmit Bay Crossing Bridge), Hong
Water
damage and cold regions where snow melting agents are used.
Kong "Stone Cutter Bridge" etc.
Carbon Fiber Composite Cable (CFCC): USA Virginia State "Hampton Roads Bridge-Tunnel Expansion
 High quality product mix (low maintenance & minimum repairs =minimizing Net Present Value)
Maintenance
Repair,
Project" (Client: Virginia Department of Transportation), Reinforcement cable for concrete pile and
precast concrete deck and girder (under construction)
 Utilization of local materials and technology transfer
[Video Link]
Equipment,
Product
https://www.youtube.com/watch?v=Nu7iJGj2HOk&list=PLypNbM48WZ9-n_13oBGXq334qRR7h9Pz1&index=2
https://www.youtube.com/watch?v=p6PK0LWEYAw&list=PLypNbM48WZ9-n_13oBGXq334qRR7h9Pz1&index=4
Boring
 We propose optimum solution based on site investigation and cost analysis.
Work System
 Supervision for installation to achieve total high performance
We provide a full range of services including design, fabrication, transportation, and supervision for
Waterproof
installation. We dispatch our multilingual supervisors all over the world.
Design
71 72
Construction
General
Global One Stop Engineering by SANKO Group
Company SANKO CO., LTD. (SANKO Group) Establishment 1949
Road
We can provide Global One Stop Engineering, from basic planning, procurement, production,
Employees 166 Website https://www.skgr.co.jp/ system integration and construction to maintenance in various industrial fields
Address 2-27-10, Higashi-Ohi, Shinagawa-ku, Tokyo, Japan
Field Plant construction work Category System
Bridge
Name: Aijiro OE Overseas Business Development Title: Manager
Contact
Tel: +81-3-3761-2111 E-mail: [email protected] Technical Overview
Singapore, Malaysia (2 Co.), Thailand (2 Co.), Indonesia, [Outline of Main Technologies of SANKO Group]
Overseas Branches 1. Instrumentation Facility Work
Philippines (2 Co.), Vietnam, USA
Tunnel
Instrumentation facilities are used to monitor and control process volume
Possible Implementation Areas South East Asia, Africa, Middle East, Eastern Europe, USA etc.
(flow, pressure, temperature, level, component etc.) in production runs at
Supported Languages English plants/factories, and realize optimum production and safe operation. We
have a lot of Instrumentation construction experience for overseas plants,
Port
Business Overview including the Middle East and Asia.
2. Electrical / Power Facility Work
The SANKO Group has been evolving with industry, continually taking on challenges and seeking fields
We have conducted work (including explosion-proof work, which requires
Improvement
not only domestically but also around the world in the over 70 years since establishment in 1949. At
Ground
expertise) for substation, distribution facilities, power equipment and
present, we are composed of 6 domestic companies segmented by sector and function and 10 overseas lighting facilities for oil / petrochemical / power plants and pharmaceutical /
companies in South-East Asian countries and the USA, mainly in the engineering field of food factories, covering design, procurement, construction, inspection,
instrumentation/control systems, electrical facilities and piping, with each company pursuing further testing and maintenance.
sophistication of its own technology/services as a professional. By utilizing synergistically collected 3. Piping, Equipment Installation Work
Piling
group strength, we have provided Global One Stop Engineering from basic planning, procurement, We have conducted piping and equipment installation work for LNG/town
production, system integration and construction to maintenance in various domestic and international gas facilities, power plants and industrial gas facilities based on
industrial fields. technology/know-how accumulated in work for nuclear facilities for many
years. Our factory, which has acquired authentication of the welding control
Slope
[Business Outline of SANKO Group]
 Engineering of Instrumentation/Electrical facilities for domestic & international plants/factories process by the Electricity Business Act, has prefabricated piping with high-
 Piping, Equipment Installation quality welding technique/facilities in response to various needs.
4, Control Panel/Sampling Equipment Production
 Engineering & Production of Control Panels/Sampling Equipment
We have produced control panel/sampling & chemical feeding equipment
Plant
 Supervisory Control and Data Acquisition (SCADA) System Integration
etc., consecutively from design, assembly and factory testing to installation
 Instrumentation Maintenance, Calibration of Measuring Equipment
& commissioning after delivery, prioritizing ease of operation &
 Production of Fitting/Valve etc.
maintenance and utilizing clean room & various function simulation devices.
Electricity,
Achievements in Japan and Overseas 5. Supervisory Control System Integration
[Establishment of Overseas Affiliated Companies] We have conducted system integration in the field of batch process /
 Singapore (1979), Philippines 2 Companies (1992, 2011), USA (1995), Indonesia (1996) manufacturing & assembly for pharmaceuticals / fine chemicals / tires / car
 Malaysia 2 Companies (1998, 2000), Thailand 2 Companies (2000, 2015), Vietnam (2016) industry, consecutively from design of supervisory control system
Water
[Recent Major Overseas Construction Experience] * E: Electrical, I: Instrumentation consisting of PC, PLC, development of control software, system
architecture and commissioning to maintenance. In addition, we have
 Singapore: E & I work for Exxon Mobil large-scale petrochemical plant (Fin. 2017)
provided validation services according to latest laws/regulations/ guidelines
 Malaysia: E & I work for semiconductor silicon production plant in Sarawak (Fin. 2013, 2015)
Maintenance
in the pharmaceutical industry.
E & I work for gas recovery & reforming plant in Terengganu (Fin. 2015)
Repair,
6. Instrumentation Maintenance / Calibration
I work for large-scale ethylene plant in Johor (Fin. 2019) Measurement is the principal portion of instrumentation. To maintain quality
 Indonesia: E & I work for PVC raw material production plant in Cilegon, Java Island (Fin. 2016) / safety / stable operation of plant and infrastructure facilities,
 Vietnam: I work for large-scale oil refinery plant in Nghi Son, Thanh Hoa (Fin. 2017)
Equipment,
comprehensive maintenance and calibration of sensors / instruments /
Product
E work for TTC No.2 50MW solar power plant in Tay Ninh (Fin. 2019) analyzers / instrumentation systems are essential. We have regional
Work System service hubs around the nation, and a calibration technical center
(Kawasaki City), which provides calibration services for
 Each overseas affiliate is controlled by a Japanese GM dispatched from the head office, and conducts
instruments/measuring equipment with the nation’s premier calibration
educational training of local staff, engineers and technicians according to its training program.
Boring
equipment traceable to national measurement standards.
 We have mobilized multinational workers ranging from a few hundred to around one thousand for
construction projects. The engineers/workers hired for the project are managed by our own database,
and we have established a structure that enables us to assign the right people in a timely manner
Waterproof
across the group. Please feel free to contact us.
 We have conducted educational training prepensely in Japan, using our intracompany transferee
system.
Design
73 74
Construction
General
Plant construction with integrated technology
Company Soltec Industries Co., Ltd. Establishment 1985
Road
Provide one-stop service for piping work, mounting and
Employees 120 Website http://soltec21.co.jp manufacturing of equipment for all sorts of plants.
Address 2-1-17 Tatsumihigashi, Ikuno Ward, Osaka, Japan
Bridge
Name: Akiko LEE Business Administration Department Title: Managing Director
Contact Tel: +81-60-6757-4550
E-mail: [email protected]
Tel: +63-977-778-3550
Tunnel
Supported Languages English, Vietnamese, Korean, Chinese
Port
Achievements of SOLTEC VIETNAM COMPANY: Manufacturing (including tank design), mounting,
Business Overview
piping work, etc.
1. Manufacturing, mounting and piping work for all sorts of plant equipment.
Improvement
Dust collection equipment, power generation facilities, conveyor facilities, rolling and refining All sorts of plant equipment, Design, fabrication, mounting,
Ground
equipment, all sorts of tanks, structures, etc. Field Category
environment-related equipment piping work
2. Environment-related equipment work
GANBARU (Vibrant) Small and Medium Enterprises 300 (Organization for Small &
Incineration plants, recycling centers, purification plants, sewage ‐ treatment plants, biomass Registration,
generator equipment, etc. Medium Enterprises and Regional Innovation in Japan), Osaka monozukuri spirit,
Awards
Piling
3. Maintenance for all sorts of plant equipment excellent companies in Osaka (Osaka Prefectural Government)
4. Worker dispatching, employment placement business (Advanced engineers in Vietnam, Korea)
Technical Overview
Slope
 Our "integrated technology" based on our entire technology with many achievements enables us to
carry out one-stop equipment manufacturing, mounting and piping work for all sorts of plants.
 Piping work, mounting and manufacturing of environment-related equipment (incinerator plants,
Plant
SOLTECVN - First factory SOLTECVN - Second factory biomass power generation, sewage‐treatment plants, filter plant equipment)
Achievements in Japan and Overseas  Plant equipment (Piping work, mounting and manufacturing for a wide variety of plant equipment such
Electricity,
We can carry out one-stop work from design and manufacturing to mounting and piping work. as power generating units, chemical plant equipment, steelworks)
SOLTEC VIETNAM - a subsidiary is established in 2010. Currently, our production capacity is up to 600  Maintenance work for all sorts of plant facilities.
tons per year in Japan and 4,000 tons per year in Vietnam. We have received orders for large-scale  By acquiring stamp U and stamp S of ASTM, Soltec Vietnam can also manufacture products related
projects in Japan and have many construction records for field erection. In Vietnam, our local employees
to boilers and pressure vessels.
Water
can carry out and we strictly abide by Japanese-style quality, delivery time, and safety. Japan and
Vietnam have tied up to provide services unique to the Soltec Group. We have 35 years of experience  We have secured a production capacity of 600 t/year in Japan and 4,000 t/year in Vietnam.
in manufacturing and field erections in Japan and 10 years in Vietnam.  By increasing the number of design teams and excellent human resources in Vietnam from 2020, we
Maintenance
Repair,
are able to provide design services at a low cost with the design remote lab system.
 You can place complete order from design to manufacturing, mounting and piping work.
Equipment,
Product
Photos of achievements and manufacturing in Vietnam There are many emerging countries that feel nervous about the issues of environment-related equipment
Work System such as water supply and sewerage equipment, wastewater treatment equipment or incinerator plants.
Boring
When the organization was established in Vietnam, Japanese engineers were stationed to guide local Our "integrated technology" helps solve these issues.
engineers. Currently, three Japanese staff (sales, cost management, construction supervision) are [Video Link]
stationed locally. We dispatch instructors from Japan as needed for large-scale construction and
https://youtu.be/xe_YUGx6rno
production projects. Vietnamese employees can now carry out all work from production to construction
Waterproof
by themselves. We will continue to dispatch instructors from Japan for a while to improve the level of Conditions for Using Technology
local engineers. One of our strengths is employing many employees in Vietnam who have three years None
of experience in Japan.
Design
75 76
Construction
General
Sustainable LP Gas & Natural Gas System with Low Environmental Burden
Company ITO Corporation Establishment May 1929
Road
Highly Efficient, Advanced Safety, and Eco Friendly LP Gas & Natural Gas Supply System
Employees 287 Website www.itokoki.co.jp/english/
Address 10-4 Hakodono-cho, Higashiosaka, Osaka, 579-8038, Japan
Bridge
Name: Sakura IWASAKI Overseas Operation Department Title: Manager
Contact
Korea (Gyeonggi-do, Jeju), China (Shanghai), Vietnam (Hanoi, Ho
Overseas Branches
Chi Minh), United Kingdom (Buckinghamshire), Myanmar (Yangon)
Tunnel
Possible Implementation Areas South Korea, China, Vietnam, Myanmar etc.
Supported Languages Korean, Chinese, Vietnamese, English etc.
Port
Business Overview
LPG Supply System LPG Supply System
1. Manufacturing Gas Supply Equipment (METI Certified High Pressure Gas Equipment Manufacturer)
50t Tank 1,500 kg/h Air-heating Vaporizer 25t Tank, Air-heating & Electric Vaporizer
Improvement
and Disaster Prevention and Mitigation Business
Ground
2. Construction and Engineering Business (Special Construction Business Licensed by the Governor of Field LP Gas & City Gas Natural Gas Supplying System Category Manufacturing & Design
Osaka) 1995 Grand Prize by Ministry of Economy, Trade and Industry.
1996 Good Company Award, sponsored by the Medium and Small Business Research Institute “Corporate
Achievements in Japan and Overseas Excellence Prize”
1999 The High Pressure Gas Safety Institute of Japan, Osaka “Distinguished Service to Safety Award”
Piling
1965: Constructed our 1st LP Gas filling station with 2 units of 10t bulk tank in Seoul, South Korea. 2008 The 300 of “Japan’s Vibrant Monozukuri (Manufacturer) SMEs by Ministry of Economy, Trade and Industry.
Contributed to the start of domestic production of LP gas in South Korea. Registration,
2005, 2008 The Japan Gas Associations “Technical Grand Prize” 1998, 2000, 2003, 2009, 2010, 2016, 2020
1998: Established our 1st overseas subsidiary in Anyang, South Korea. Awards “Technical Prize”
2011 The World LP Gas Association Global Technology Conference “Technical Grand Prize”
Our products were adopted by pressure regulating stations for city gas in the Nagano Winter 2013 The World LP Gas Association Global Technology Conference “Technical Grand Prize” Runner Up
Slope
Olympics, Japan. 2014 Higashi Osaka Monozukuri (Manufacturing Engineering) Award “Grand Prize”
2020 Advanced Cogeneration and Energy Utilization Center Japan The Cogeneration Award “Technical Prize”
2001: Established a subsidiary in Japan to expand our overseas business. Participated in the District
Development .Project in Ho Chi Minh, Vietnam and started designing LP Gas supply equipment
and facilities. Technical Overview
Plant
2003: Established a sales company in 2003, and a manufacturing factory in 2005, both in Shanghai, [Technical Features]
CHINA. We design and construct LP gas and city gas natural gas supply systems for midstream and downstream
2006: Designed and constructed LPG facilities for a new terminal at the Tan Son Nhat Int’l Airport in based on Japanese high safety standards. Utilizing our experience in Japan and overseas markets, we
HCM, Vietnam.
Electricity,
can flexibly respond to local conditions and supply LP gas to cover residential buildings and/or shopping
2007: Incorporated our local liaison office in Ho Chi Minh, Vietnam.
malls from LP Gas vaporization & regulation facilities in one place through pipelines. For factories, we
2010: Sold LPG supply equipment for a venue at the Shanghai World Expo in Shanghai, China.
2015: Contracted and installed LPG equipment for a new terminal of the Noi Bai Int’l Airport in Hanoi, support the improvement of existing supply systems or conversion from coal or heavy oil to LPG or NG,
Vietnam. Delivered LPG supply equipment for the ICHTHYS LNG Project in Australia. and suggest unique solutions to help reduce carbon emissions using our eco-friendly products such as
Water
2016: Established a joint venture company in Yangon, Myanmar. our air-heating type vaporizers for LP gas (the ITO eco Rizer).
2018: Applied LPG supply system at the Pyeongchang Winter Olympics in South Korea. [Merits of Adopting Technology]
 Reduce consumer’s risk of danger caused by changing of cylinders. Our “automatic changeover
Maintenance
Repair,
regulators” and other innovative products enable the changing of cylinders without cutting off the LP
gas supply.
 We can design and install an automatic shut-off system that prevents gas leakage even after an
Equipment,
accident or natural disaster using advanced safety devices, and a gas-leakage centralized monitoring
Product
Condominiums at development zone Our Lineup
in Vietnam (Supply Destination) system.
 We optimize design in accordance with local conditions to ensure a safe and reliable supply. Follow-
Work System
up services such as periodic inspections are also available.
 In Vietnam, we have 1 or 2 Japanese technical sales staff stationed and 37 local staff. In Myanmar, 1
Boring
 Reduce CO2 emissions and running costs in factories by introducing air-heating type vaporizers.
Japanese technical sales representative is stationed. Our experienced staff can flexibly handle
projects in neighboring countries. [Contributions to Solving Issues]
 We provide excellent service for residential area distribution using LPG low pressure system, for Ensuring universal access to reliable, sustainable, and modern clean energy services.
Waterproof
commercial facilities with equipment offering a high level of safety, and for complexes and difficult Conditions for Using Technology
industrial facilities which cannot be handled by local agencies. We will support you to enable a safe
Please feel free to contact us.
and reliable supply of gas.
Design
77 78
Construction
General
SF Double Wall Tank
Company TAMADA CORPORATION Establishment 1950
Road
Employees 278 Website https://www.tamada.co.jp/ Hazardous material storage underground tanks with an emphasis on safety, quality and economy
Ha 61-1 Muryojimachi, Kanazawa, Ishikawa 920-0332, Japan
Bridge
Address Name: Takamitsu AKAIKE Overseas R&D Division Title: Manager
Tel : +81-3-5401-3689 E-mail: [email protected]
Overseas Branches Hai Phong Province, Vietnam
Tunnel
Possible Implementation Areas Vietnam, Southeast Asia
Supported Languages English, Vietnamese, Chinese
Port
Business Overview
1. Design and manufacture of underground storage tanks and fire cisterns *No. 1 domestic share (70%)
Improvement
for S&F double wall tanks
Ground
2. Design and construction of hazardous substance facilities
3. Underground Tank Interior Lining (extend the useful life of old tanks)
4. Statistical Inventory Reconciliation for underground storage tanks Field Oil Construction Category Product
Piling
5. AQUA in PIT, AQUA in Angel (Earthquake Resistant Water tanks for Fire protection & Drinking Water Registration, Awards JIS Q 9001:2008 (ISO9001:2015)
Purposes)
Technical Overview
6. Maintenance & Inspection of underground storage tanks and tank trucks
Slope
7. Overseas business (licensing of technology, OEM, delivery of imports, etc.)
<SAFETY>
1. 1 Seamlessly laminating the FRP layer of the outer shell consists of a unique construction method
Plant
1. In 2012 the Japan International Cooperation Agency (JICA) conducted the SDGs Business Model
(multilayerd method) which makes up for the weak point of FRP that has seams with the ordinary
Formulation Survey with the Private Sector for Hazardous Material underground storage tanks (in
construction method, creating a solid underground tank.
Vietnam)
Electricity,
2. No. 1 construction record in the industry (in Japan) thanks to outstanding strength of a steel tank, with
2. In 2013 JICA conducted The Knowledge Co-Creation Program for the Socialist Republic of Vietnam,
no tanks damaged by the Great Hanshin-Awaji Earthquake.
a pilot survey for disseminating small and medium enterprises technologies for SF double shell tanks
3. Pressure gauge is installed and kept in place until the end of tank installation to enable accidents to
to avoid leakage of hazardous materials.
be instantly detected during construction.
Water
3. In 2013 we established a local subsidiary in Vietnam and opened a factory in 2015 to deliver products
4. Can also be used to store fuel containing alcohol.
to Vietnam, Japan, and third countries.
5. Leakage monitor (leakage detection device) detects minute leaks in the tank and provides instant
Maintenance
4. In 2018 1st Japan Construction International Award (MLIT) SMEs category
Repair,
notification with a buzzer.
5. Delivery of SF double wall tanks for gas stations and factory facilities in Vietnam
6. Delivery of chemical storage tank (double wall tank) to the Philippines Since the tank itself has a function to detect leaks, there is no need to install a pit room, and construction
Equipment,
Product
7. Contracted manufacturing of various plate products (tank, ducts, hoppers, stands, etc.) costs and period can be reduced.
8. Licensing of technology (to Thailand, Malaysia, China, Taiwan) [Contributions to Solving Issues]
Work System It is possible to prevent soil contamination by preventing the fluid leaks from the underground tank.
Boring
Our technician will be on hand and provide installation guidance when the tank is installed. [Video Link]
https://www.youtube.com/watch?v=yQv3meo_JxE&t=6s
Waterproof
There are no qualifications. Please feel free to contact us if you have any questions.
Design
79 80
Construction
General
EPC Contractor for Electrical and Wireless communication facilities
Company JESCO Holdings, Inc. Establishment August 1970
Road
Technical capabilities cultivated through 20 years of experience in Vietnam
Employees 584 Website https://www.jesco.co.jp/en/ (Design and material costing, management of construction and construction)
Address Shin Nakano Building, 4-3-4 Chuo, Nakano-ku, Tokyo 164-0011, Japan
Bridge
Name: Masayuki NUMAI Strategic Corporate Planning Office Title: Director
Contact
Vietnam (Ho Chi Minh , Danang , Mekong Delta , Hanoi),
Overseas Branches
Malaysia (Kuala Lumpur), Singapore
Tunnel
Vietnam (Ho Chi Minh City, Da Nang City, Hanoi City, Long An
Province)
JESCO ASIA JSC Design office ACECOOK VIETNAM JHE Field office
Business Overview
Port
Solar power generation equipment *The screen is a 3D-BIM blueprint.
We are an EPC Contractor (Engineering, Procurement and Construction) engaged in the construction
of electrical and wireless communication facilities in Japan and Vietnam, providing one-stop integrated Field Construction, maintenance Category Construction procedure
Improvement
solutions from consulting, engineering, cost control and construction to management of construction and 2018 1st JAPAN Construction International Award (Minister of Land, Infrastructure and
Ground
maintenance. Our main businesses are described below. Registration, Transport Prize), 2016 Engineering Achievement Award (Vietnam, Noi Bai International
(Domestic) Renewable energy such as solar power, mobile communication systems, wireless networks, Awards Airport), 2018 High quality construction award (Vietnam Ministry of Construction), 2019
electrical equipment construction, plant-related construction, power transmission network construction, First-class construction-related ability certificate (Vietnam Ministry of Construction)
and high-voltage power generation and transformation equipment construction
Piling
(Vietnam) Various engineering and cost integration services (Design soft BIM has been introduced),
Technology Overview
electrical equipment work for Vietnam international airports, disaster prevention radio-related works,
solar power generation, highway ITS work, high-rise condominiums (electrical equipment, air [Technical Features]
conditioning, water supply and drainage and fire-fighting systems)
Slope
 We are able to provide consistent services from design and cost estimation of construction,
Achievements in Japan and Overseas construction management, and maintenance.
JESCO ASIA JSC was established as a subsidiary in Vietnam in 2001. Headquarters were established  The design and cost estimating departments in Japan and Vietnam can be connected through a DX-
and branches were set up in Da Nan, Hanoi, and Mekong. In 2014 HOA BINH Group's facility based web conference system, creating a unified virtual space.
Plant
construction company was established as JESCO HOA BINH JSC (JHE) through an M&A by the JESCO [Merits of Adopting Technology]
Group.
 High quality, low cost, and speedy design and cost estimation through the use of offshore resources
In addition to the design, construction, and construction management of several international airport
(Vietnam)
Electricity,
electrical facilities funded by Japanese ODA (Noi Bai, Tan Son Nhat, Long Tan), the company is
expanding its business domain to include disaster prevention radio-related construction and solar power  Total management from cost estimation to construction is possible by adopting the latest BIM
generation. In Ho Chi Minh City, the company boasts a high market share in the construction of electrical, technology.
air conditioning, water supply and drainage, and fire extinguishing systems for high-rise condominiums. [Contributions to Solving Issues]
1. Noi Bai International Airport: Design, construction management, and electrical equipment work  Advanced engineers can be trained by the JESCO Academy, an in-house education system utilizing
Water
2. Hue Province: "Emergency operation and flood management of dams using a water damage
the internet.
management information system
 Contribution to the efficient development of social infrastructure through our experienced construction
3. High-rise condominiums: Electrical equipment, air conditioning, water supply and drainage and fire
Maintenance
fighting systems. management technology.
Repair,
 Expansion of employment of local high-level engineers in Japan (through the use of JESCO Expert
Agent (JEA), the Group's recruitment agency for foreign engineers)
[Video Link]
Equipment,
Product
 Infrastructure improvement : Gateway to the sky Noi Bai International Airport in HANOI
https://www.jesco.co.jp/en/project/story07.html
 Three key people who led a large-scale project to success
https://www.jesco.co.jp/ja/project/story06.html
Boring
1. Noi Bai International Airport 2. Disaster Prevention Map 3. Flora Mizuki Project
Work System  JESCO has provided Vietnam with Japan's high quality EPC business through our localized power
https://www.jesco.co.jp/en/project/story03.html
JESCO ASIA JSC Ho Chi Minh Head office, Da Nang Branch, Mekong (Long An)Branch - Total number
Waterproof
of employees: 166 Conditions for Using Technology
JESCO HOA BINH ENGINEERING Ho Chi Minh Head office – Number of employees: 168
JESCO CNS Vietnam Hanoi – Number of employees: 23 None
Design
81 82
Construction
General
Data collection technology
by integrating sensors and communications
Company Yuicom Networks Co., Ltd. Establishment April 2005
Road
Employees 335 Website http://yuicom.net/ Technology that collects and accumulates data of working people
by fusing communication and sensors
Address 4-29-6 WIS Building 4F, Nishi-Shinjuku, Shinjuku-ku, Tokyo, Japan
Bridge
Name: Ryo SANO Wide Area Engineering Division Title: General Manager
Contact [Point 0 Marunouchi]
Tunnel
Possible Implementation Areas Please contact us
Business Overview
Port
As a partner of telecommunications carriers,
we are working to build systems for IOT-
Improvement
related equipment that will lead to the future.
Ground
1. Access engineering
Build a network using optical fiber cables. Providing office space where you can work Communication environment
2. Mobile engineering Field Category
more efficiently construction
Piling
Comprehensive construction work, from
consulting to construction and maintenance Technical Overview
of mobile phone base stations. [Technical Features]
Introduction to
Comfortable Living 3. IT Solutions As part of the work to build workspace “Point 0 Marunouchi” in an office building in central Tokyo that
Slope
and Helping to We will make full use of the various
Protect a Safe Life incorporates multi-spatial content under the theme of "More efficient office space", we undertook the
technologies and networks that have been development of a communication environment and the installation of IoT devices under the umbrella of
cultivated through the construction of a certain telecommunications company.
Plant
communication facilities up to now to In addition to air conditioning, lighting, sound, fragrance, furniture, and other equipment, the workspace
promote initiatives for higher layers. is designed to suit a variety of office environments, collecting data on the comfort, productivity, and
4. Energy-related business health of the people who work there, and verifying the effectiveness of content and creating new
Electricity,
Construction and maintenance of content. The workspace is designed to suit a variety of office environments by collecting data on the
communications infrastructure facilities comfort, productivity, and health of the people who work there, and not only the equipment such as air
provided by gas suppliers. conditioning, lighting, sound, fragrance, or furniture. We also plan to use feedback from workspace users
5. Temporary staffing services to enhance spatial content.
Water
We dispatch professional engineers who ■ Main content
are well versed in each field with high skills. 1. Automatic interlocking service for air conditioning, lighting, and security linked with location
information in the space
Maintenance
Repair,
2. Meeting room where discussions can proceed smoothly with voice-based sentiment analysis and
[Results in Japan] "scent spraying"
・ Construction of wired transmission lines for telecommunications carriers [Merits of Adopting Technology]
Equipment,
Product
We select and propose various application systems that are suitable for local requests (monitoring
・ Construction of terminal equipment for communication services
systems that utilize sensors, systems that use cameras with high functionality and learning functions,
・ Construction of radio transmission lines for telecommunications carriers
etc.)
・ “IOT” Device System Construction [Contributions to Solving Issues]
Boring
Work System We will proactively administer and teach you communication and sensor fusion facility technology for
local telecommunication engineers.
For the above, we can provide all construction systems.
Waterproof
We also operate a temporary staffing business, so we can dispatch employees overseas upon request.
We can propose applied technologies that integrate communication and sensors.
Design
83 84
Construction
General
Centralized Monitoring System that Provides
Sustainable Comfortable Space
Company I.B. Technos Co., Ltd. Establishment August 1975
Road
Employees 300 Website https://www.ibtechnos.co.jp Highly Scalable Open Monitoring System
Address 3-36-3 Daita, Setagaya-ku, Tokyo, Japan
Bridge
Name: Motohide USUKURA Business Strategy Office Title: Director
Contact
Tunnel
Possible Implementation Areas Vietnam, Indonesia and other ASEAN countries
Port
Business Overview
[Centralized monitoring system for office buildings / commercial buildings / factories / other facilities]
Total business solutions from design, construction management and maintenance, to software
Improvement
development of automated HVAC control systems.
Ground
Notices: Wide Area Monitoring System IB-OPEN
 Support for devices regardless of manufacturer
 Our product line consists of the following open system monitoring solutions: Field Facility Management (energy / wide area) Category System
1. IB-VISION More than 10,000 points can be monitored and controlled. The devices
Piling
used will not be discontinued, so end of life updates are not necessary. Technical Overview
2. IB-OPEN The monitoring devices can be remotely monitored and operated
regardless of manufacturer. There is no need to modify software running
inside existing systems. <IB-VISION> is an open monitoring system that supports connections with any vendors' devices as well
Slope
3. Cloud-based Non-invasive wireless energy sensors send data to the cloud and the data as smooth future device replacement. We have introduced and operated the system at nearly 300
energy monitoring can be automatically visualized in the desired format.
sites.
4. Other solutions We also propose construction of systems other than our own products to
<IB-OPEN> allows operations management of multiple systems (regardless of vendor) over a wide area
Plant
meet customer requirements. In particular, capacity management solutions
for HVAC systems are effective in areas prone to power outages. from a single site via the internet (see drawing). We have installed the system for around 10
customers, and some of them manage operations on their own during the daytime while delegating
[Building management and energy efficiency projects]
Electricity,
In addition to facility management, we provide energy efficiency diagnostics and consulting services, the task to us after hours.
local government reporting form preparation services, and government subsidy advice services.
We are a registered carbon emissions trading verification institute in Tokyo and Saitama Prefecture, and
make use of considerable experience and expertise to ensure high quality, appropriate verification. <IB-VISION>
Water
Achievements in Japan and Overseas  It can be installed at a lower cost compared to large companies. Even in cases where it takes a long
 We usually work under contract to subcontractors to construct / start up automatic HVAC system time to install the system, end of life device updates due to discontinuation are not necessary.
control throughout Japan from government offices, multi-tenant commercial buildings, commercial
Maintenance
 It collects signals as a hub and controls devices regardless of manufacturer across multiple areas.
Repair,
facilities and schools to factories. In particular, we have many years of experience in cleanrooms for
semiconductor manufacturing. [Contributions to Solving Issues]
 We use our own centralized monitoring system to perform operations management. It is an open <Capacity Management> allows HVAC and lighting to be automatically controlled according to priority
system and scalable to accommodate any hardware regardless of manufacturer / model, and can
Equipment,
during peak hours within the contracted power, contributing to energy management and efficiency.
Product
also be used for integrated monitoring.
 We employ I/O devices that manufacturers do not discontinue, therefore there will be no need to <IB-OPEN> enables centralized operations management of facility monitoring devices regardless of
replace all connected devices due to the discontinuation of some devices. vendor from a single site, helping reduce personnel.
 To date, we have focused on doing business domestically, however as our parent company Totech
[Video Link]
Boring
Corporation has a branch office in Jakarta, we believe we will be able to expand into Indonesia and
deliver our services smoothly. https://www.ibtechnos.co.jp/product/
https://www.totech.co.jp/en/company/group/
Waterproof
Work System
 IB-OPEN requires an internet connection.
We are able to send our engineers to the site while requesting Totech Indonesia to send staff which will
 As precision equipment is used, the installation environment needs to be properly maintained.
work together. We aim to increase the number of locally hired engineers in the future.
Design
85 86
Construction
General
Ground Water Purification Plant (Remote Monitoring Type)
Company KOKEN BORING MACHINE CO., LTD. Establishment 1947
Road
Remotely monitored and controlled plant purifies groundwater and enables
https://www.koken-
Employees 230 Website standard water quality, stable water supply and the reduction of water charges
boring.co.jp/en/
Removal of iron and manganese
Address Mejiro Nakano Building 1F, 2-17-22 Takada, Toshima-ku, Tokyo, Japan Membrane filter
Raw Water Tank
Bridge
Treated Water Tank Water Tank
Name: Kazuyoshi MORIYAMA Engineering Division Title: Deputy Section Chief
Contact
Drinking
Tunnel
Sodium hypochlorite Toilet
Possible Implementation Areas Worldwide etc...
Supported Languages English, French, Tamil (India) Alarm system

Submergible pump 24 hours a day
Port
Deep well
Business Overview
Ground water plant Ground water purification flow diagram
Improvement
We are the only listed company (JASDAQ) among boring machine makers. We can provide one stop
Ground
Groundwater development, Groundwater
Field Category Equipment, system
solutions since we design, manufacture, sell, construct, and maintain a wide variety of boring machines. purification
There are special methods of construction that only we can do, and have obtained many patents. Registration,
Letter of appreciation from residents of Ishima, Tokushima (2010)
Awards
Piling
Technical Overview
Slope
 Taking advantage of the characteristics of the manufacturer, we select the most suitable machine for
the site from a wide variety of boring machines.
 Fully automatic operation for normal water sampling and membrane cleaning.
 An alarm system using IoT automatically notifies the person in charge of an emergency 24 hours a
Plant
day.
・Compact design according to the location of the installation
Electricity,
We provide boring machines, technical guidance, and construct boreholes and waterworks around the  Total support from water well drilling to purification plant installation and maintenance.
world.  Water charges can be reduced.
 Remote monitoring technology ensures quick response in case of trouble
 Significant space saving compared to conventional equipment.
Water
 Even if the existing water supply is cut off, groundwater can be supplied in a stable manner, enabling
Maintenance
factories and hospitals to continue operation.
Repair,
 We can provide safe and secure water to residents of areas with contaminated groundwater.
Mali: Malawi: El Salvador:
 ・The plant capacity can be set according to the customer's request, taking into consideration the
Pakistan
 Water supply facility pumping capacity (groundwater volume) of the well.
Equipment,
 Water supply facility  Machine provision  Machine provision
Product
 Borehole construction  Borehole construction (Disaster prevention) (Deep well)
 Renovation of borehole  Technical guidance Conditions for Using Technology
 Technical guidance
 Technical guidance  It is suitable for businesses (factories, hospitals, hotels, etc.) who want to use water with standard
water quality.
Boring
Work System  It is suitable for businesses that use a lot of water every month which are burdened by water charges.
 Japanese engineers and Indian engineers are in charge of groundwater development.  It is necessary to conduct groundwater exploration before construction to determine whether this
 In the case of construction, several engineers and transport machines will be dispatched from Japan. system can be installed.
Waterproof
 Purification of surface water such as river or lake water is not possible.
 Scheduled to open a branch office in Tamil Nadu, India
 Drainage is the responsibility of the business operator.
Design
87 88
Construction
General
株式会社大建 “Tametotto” Underground Rainwater Storage Tank
Company Daiken Co., Ltd. Establishment 1974
Road
Employees 38 Website http://www.d-ken.jp Easily built tank that stores rainwater with drinking water quality for various types of uses
Address 2-9-12 Minamisho, Sawara-ku, Fukuoka, 814-0031, Japan
Bridge
Name: Kazutoshi OKAMOTO Land Management Division Title: Leader
Contact
Tunnel
Possible Implementation Areas Vietnam, Laos, Indonesia
Patent No. Backfill soil
6771250 Crushed stone layer
Port
Patent No. Cesspipe
Business Overview
6190992
We have received a total of 24 awards from the Ministry of Land, Infrastructure and Transport, and 31 Structure of “Tametotto” Photo of work for “Tametotto” in Kakuma
Improvement
of our 38 employees are technical experts. Rainwater is collected on the roof and stored in the Refugee Camp in Kenya (Sept. 2019)
Ground
(1) Compensation Consultant: Land surveys, land appraisals, property surveys, machine tool surveys, tank with a crushed stone layer. It can be used to flush
business compensation, special compensation, business losses, compensation method toilets and with a hand pump in a disaster.
examination, compensation explanation, business certification, application for adjudication Field Underground water storage tanks, regulating ponds Category System
(2) Construction Consultant: Roads, rivers, sand/mud control, structures, intersections, bridges, water
Registration, Patent No. 6190992, Patent No. 6771250
Piling
supply and sewerage systems, agricultural engineering, parks, biotopes, residential land
Awards Trademark registration (Overseas): Int’l Reg. No. 1499968, (Domestic): No. 6172501
development, development permit application, various types of construction management,
environmental assessment
(3) Residential Development Division: Developer, real-estate transactions, planning, management, Technical Overview
Slope
builder [Technical Features]
(4) Survey Division: Sites, settlement, depth, GPS (1) Enables large volume of rainwater to be stored at a location in close proximity.
(5) Geological Surveys: Machine boring, lab tests (2) Rainwater can be purified to drinking water level quality. When dirty water passes through crushed
(6) Construction Division: Design, management
stone, it is cleaned by contact sedimentation, absorption by microorganisms and oxidative
Plant
decomposition. (3) Low construction costs. (4) Easy maintenance after construction.
(1) “Tametotto” tank that stores large volumes of rainwater while purifying it.
(2) “NCZ Method” which creates robust manmade foundations and underground spaces. (5) Can be used as a park, parking lot, playground or other purpose after construction underground.
(6) Can be used with a hand pump in a disaster. (7) Controls outflow during heavy rainfall (regulating
Electricity,
pond function). (8) Contributes to SDG Goal 6 “Ensure access to water and sanitation for all”
Track Record for “Tametotto” Underground Rainwater Storage Tanks: [Merits of Adopting Technology]
(1) May 2012: “Ogiura Garden Suburb” 18-unit residential complex developed by Daiken in Itoshima, (1) Short construction period
Fukuoka
Water
(2) Materials and equipment that can be locally obtained are used
Storage volume: Approx. 122t x 1 tank, Application: Water for flushing toilets, watering, washing cars,
Users: Approx. 50 persons (3) Local workers can perform work since no special construction capabilities are required
(2) June 2014: UN Habitat “Water for Life Project” in Laos [Contributions to Solving Issues]
Maintenance
Storage volume: Approx. 100t x 2 tanks, Application: Drinking water, Users: Approx. 600 persons (1) Enables water source to be secured in countries with water supply problems (insufficient water during
Repair,
(3) May 2017: UN Habitat “Women’s Facility Construction Project” in Laos dry season, contaminated wells, etc.)
Storage volume: Approx. 150t x 1 tank, Application: Drinking water, Users: Approx. 200 persons (2) Can be more quickly built and at a lower cost near residences compared to dams as a method to
(4) January 2018: UN Habitat “Pilot Project” in Vietnam
Equipment,
secure water source, and cost of water purification plant/piping etc. is eliminated
Product
Storage volume: Approx. 100t x 1 tank, Application: Watering of plants
(5) September 2019: UN Habitat “Kalobeyei Refugee Camp” in Kenya (3) Effectively controls water outflow in the event of torrential rain (regulating pond function)
Storage volume: Approx. 100t x 1 tank, Application: Drinking water, Users: Unknown [Video Link]
(6) 2020 (Planned): Installation of 4 tanks planned in Indonesia by Ministry of Foreign Affairs “N Link” Pamphlet: http://www.d-ken.jp/tank.html Introduction video: http://www.d-ken.jp/movie.html
NGO Cooperation Grant Aid Project
Boring
Work System (1) Confidentiality agreement with local construction company is required
Overseas Construction Track Record (100 ton class) (2) Collection of data for installation location (rainfall, etc.) and region in which water distribution rules
Waterproof
(1) Two Japanese engineers dispatched, built by 7 – 10 local workers. can be proposed after installation
(2) Almost no materials or equipment needs to be brought from Japan, and local materials and heavy
(3) Injection of microorganism activator as necessary
machinery is used to complete work in about one week.
Design
89 90
Construction
General
Small-scale Distributed Desalination Unit
Company Kyowakiden Industry Co., Ltd. Establishment 1948
Road
Produces drinking water from saltwater (Compact unit type) /
Employees 487 Website https://www.kyowa-kk.co.jp/ “Hybrid Energy and Water Purification System” with Solar power and Batteries can
Address 10-2, Kawaguchi-machi, Nagasaki-shi, Nagasaki, 852-8108, Japan operate even under unstable power conditions
Bridge
Name: MATSUZONO Overseas Business Division
Contact
Overseas Branches China (Shenzhen), Vietnam (Ho Chi Minh city, Ving long city)
Tunnel
Possible Implementation Areas China, Vietnam, Taiwan, other Southeast Asia area
Supported Languages English (e-mail only), Chinese (in China), Vietnamese (in Vietnam)
Purification unit (5 m3/D) Solar power and Batteries Remote monitoring
Port
Business Overview
Kyowakiden is a Japanese leading plant contractor for turn-key projects, undertaking a complete range Seawater desalination, Drinking water
Field Category Material, product, system
Improvement
of Engineering, Procurement and Construction (EPC) services through project completion. production
Ground
1. Engineering (System & Machinery for Water treatment /Electrical /Remote monitoring) Registration, Patent No. JP6284798 “Drinking water production system using solar power
2. Manufacturing (Industrial machinery /Water treatment machinery / Control panels) Awards generation”
3. Operation & Maintenance (Water treatment facilities /Production facilities /Rotary machines)
Technical Overview
 Construction and O&M of Japan’s largest Seawater desalination facility (50,000 m3/D)
Piling
 Received “Corporate Excellence Prize” at the 53rd Good Company Award 2019 [Technical Features]
Achievements in Japan and Overseas  High-performance water treatment system which can produce 5 m3/D Safe drinking water from saline
well water and river water etc. using Reverse osmosis (RO) membrane.
[Overseas Business Record]
Slope
 Automatic switching system of Solar power + Batteries + Commercial power supply (or Power
Design & Manufacturing of Small-scale Seawater Desalination units, machinery for water supply and
sewage water treatment facility, and Control panels mainly in Southeast Asian area. generator) supports operation in unstable power supply environment.
<Vietnam> Installation of “Highly Concentrated Waste Liquid Reduction and Purification System”  Remote monitoring system can check and manage the operation status of the equipment remotely.
Plant
<Indonesia> Development and introduction of “Hybrid Energy and Water Purification System” with PV  Pilot plant in Indonesia is still in operation.
system [Merits of Adopting Technology]
Overseas Manufacturing Record (sample)  Short construction period for site work: Purification system is a unit, making installation work easy
Electricity,
 Design and manufacturing of sludge collector, grid collector, hopper, screen and control panel for [Contributions to Solving Issues]
sewage treatment plant  Local production for local consumption of drinking water in remote areas such as islands and rural
 Manufacturing and installation of cranes for water treatment equipment for a resort area areas remote from cities: No need to bring water or go shopping in the city
 Design and manufacturing of control panels for seawater desalination plant  Equipped with solar panels and batteries, this system enables stable water production even in the
Water
Provide optimal design and manufacturing services with SCM in Japan, China and Vietnam event of a power failure, and also prevents equipment failure and shortened product life due to power
[Business by local subsidiaries (China / Vietnam)]
failures.
Maintenance
Engineering Services for Water treatment
 Since the operation status of the equipment can be constantly checked by a remote monitoring
Repair,
Provide engineering services and EPC services
system, the need for an engineer to go to the site is reduced by the predicting and dealing with failures,
such as wastewater treatment, reuse, and water
membrane replacement, etc.
purification systems primarily for various factories.
Equipment,
Product
Photos:
(1) Hopper (Vietnam)  If there is no commercial power supply, a generator can be used instead, but it cannot be used in
(2) Concentrated waste liquid reduction (Vietnam) conjunction with a commercial power supply.
(3) Purification (China)  For remote monitoring, a data communication network or a dedicated mobile phone line is required.
Boring
(4) Wastewater treatment (China)  For water purifiers and batteries in particular, an enclosure is needed to protect against wind and rain.
Work System  The quality of raw water needs to be analyzed in advance. An additional system may be needed in
some cases.
Waterproof
 Dispatch Japanese mechanical, electrical and construction engineers to Southeast Asia as
supervisors  Drainage of raw water and drainage of concentrated water, etc. must be permitted by the relevant
 As needed, dispatch engineers trained in China and Vietnam authorities.
Design
91 92
Construction
General
IoT Compatible Cloud-based Remote Monitoring System
Company NISSAKU CO., LTD. Establishment April 1912 Remote monitoring and alarm signal transmission of well data made possible
Road
Enables early detection of abnormalities
Employees 269 Website https://www.nissaku.co.jp/
Monitor screen example
Address 199-3 Sakuragi-cho 4-chome, Omiya-ku, Saitama-shi, Saitama 330-0854, Japan
Bridge
Name: Masakazu MIZOBUCHI International Division Title: General Manager Cloud
Contact Abnormality notification
Eliminates the need for on-site work
Overseas Branches Nepal (Kathmandu) Well
to confirm initial information
PC/mobile
Tunnel
Possible Implementation Areas Nepal, Benin, Senegal, Zambia, Uganda
Field Well drilling, operation and maintenance Category Systems
Supported Languages English, French (e-mail only)
Technical Overview
Port
Business Overview  Automatically measure and remotely transmit data (groundwater level, water discharge rate etc.)
needed for the operation and maintenance of wells.
In the more than 100 years since we were founded in 1912 as the well construction company that  Also possible to send warning notifications to the mobile phones of managerial staff when
Improvement
introduced the first motorized rotary drilling machine into Japan, we have accumulated extensive measurement data is abnormal.
Ground
experience in groundwater development throughout Japan. Currently we have three main departments:  The lifespan of a well can be extended by monitoring data in real time and detecting abnormalities at
Well drilling and Facility construction, Advanced civil engineering, and Geological survey. We have an early stage in order to take countermeasures.
earned the trust of our customers as a comprehensive engineering company in the field of water and [Contributions to Solving Issues]
 A well is a facility that requires continuous maintenance. Our company contributes to the maintenance
Piling
land by providing a one-stop service, ranging from survey and design to construction and maintenance, of local water environments by making use of our extensive experience and achievements. We make
with a combination of traditional technologies and the latest original technologies. Commencing with well appropriate recommendations regarding the operation and maintenance of wells based on data that
has been obtained through remote monitoring.
construction in Afghanistan in 1958, we have drilled more than 5,000 wells in more than 40 countries Conditions for Using Technology
Slope
throughout the world.  To utilize this technology there just needs to be a water level sensor and a flow meter installed in the
In particular, since 1989, we have been involved in groundwater well, a primary power supply and working mobile phone communications.
supply facility construction projects through ODA grant aid Highly Durable Handpump
cooperation, mainly in African countries.
Plant
[Details of Business] 1. Well drilling 2. Well rehabilitation Achieve a lifting height of 50m with a handpump
A high lift handpump with excellent durability
3. Facility construction 4. Advanced civil engineering
Electricity,
5. Geological surveying, construction consultancy service
Stainless steel rod
6. Overseas business (ODA Groundwater projects)
7. Manufacturing and sales of equipment for wells
Achievements in Japan and Overseas Bellows
Water
[Well Drilling] Installation example 1 (Type A) Installation example 2 (park installation) Installation example 3 (Type B)
2019: Intake well for underground dam, Miyakojima, Okinawa Field Well drilling and pumping equipment Category Products
Maintenance
2019: Hot spring well, Tokyo Technical Overview
Repair,
2020: Subsidence observation well for water-soluble natural gas, Niigata [Technical Features]
・ Realization of a handpump with excellent durability and high lift height by use of pumping method that
[Advanced Civil Engineering] utilizes a bellows and a stainless steel rod.
2019: Expressway Tunnel Landslide Countermeasure (Piling), Yamagata ・ The pump cylinder has a built-in bellows mechanism, which means fewer parts rubbing against each
Equipment,
Product
Site arrangement for well drilling other when pumping water.
2020: Water collecting well for water supply facility, Akajima, Okinawa (Hot spring drilling) [Merits of Adopting Technology]
[Geological Survey]  Eliminates the need for periodic replacement of consumable parts, which greatly reduces pump
2019: Survey of water sources for water supply, Nagano maintenance frequency.
Boring
2020: Hydrological survey of expressway service area, Kanto region  Anti-disaster wells and handpumps are being reevaluated as emergency water sources in times of
[Overseas Business] disaster. Water can be pumped up from a depth of 50 meters with just the small force of a hand pump
even in areas with deep groundwater. Local anti-disaster measures can be enhanced by securing
2017: Water supply and sanitation Improvement in rural areas, Senegal water sources that do not rely on electricity.
Waterproof
(Won the 2nd JAPAN Construction International Award: Water source survey 3D Conditions for Using Technology
https://www.mlit.go.jp/JCIA/award/2/projects/#05) analysis (geophysical survey)  The inside diameter of the well tube must be 100 mm or greater, and to get a pumping water volume
of 10 L/min, the pumping water level must be at a depth of 50 m or less.
Design
93 94
Construction
General
Hydrostatic Water Pressure Control Technology
Company ES-Waternet Co., Ltd. Establishment 1970
Road
System costs can be reduced by water pressure control without using electricity.
Employees 65 Website https://www.es-waternet.co.jp/
Address 4-24-1, Suwa, Tama-shi, Tokyo, 206-0024, Japan “Hydrostatic Water Pressure Control” with a pilot type pressure reducing valve:
Bridge
Name: Yuuki SHIMOGAMA International Marketing & Sales Title: Manager In cases where a butterfly valve is used for pressure reducing,
Contact E-mail: [email protected]
Tel: +81-4-2318-1674 the downstream pressure will be the same as the upstream
[email protected]
when the water flow is shut off.
Tunnel
With a pilot type pressure reducing valve,
Possible Implementation Areas Africa, Asia, Middle East, Latin America
the downstream pressure can be sustained as set
Supported Languages English, French
even when the water flow is stopped.
Downstream
Port
Details: https://www.es-waternet.co.jp/product/list?series_id=94
Business Overview
Under the slogan “Contribute to the development of human beings and society through the water Available Range:
Improvement
Ground
business”, we are involved in the 4 business fields below: We can design economical water pressure control systems using hydrostatic pressure control.
 Agriculture (Field irrigation, Controlling temperature in greenhouses by fogging, etc.)
We can make total proposals such as described below:
 Environment (Sprinkling water on roofs, lawn playgrounds, etc.)
 Industry (Sprinklers for melting snow on railways, etc.) Element Selection Construction
Piling
System Design Transport
 Oversea Projects (Supplying materials for overseas construction projects) Procurement Management
In the field of “Oversea Projects”, we have supplied pipes, valves and other items for water pipelines
and facilities for both public (Official Development Assistance by JICA) and private projects. We are
Slope
involved in the entire flow of the business - from engineering to logistics. Field Water supply, Irrigation Category EPC

Technical Overview
[Project for the improvement of the drinking water supply of the upper part of the city of Conakry
Plant
(Guinea)]
As a contractor, we installed a ductile iron pipeline (DN1100 mm, 4.46 km length).  Hydrostatic pressure control is performed using a pilot type pressure reducing valve.
Replacing the FRPM pipes with ductile iron pipes has strengthened the  It is possible to maintain the set downstream pressure on the pressure reducing valve.
Electricity,
pipeline, and made the water supply more stable.  The pipe type/size on the downstream side can be selected based on the pressure you set.
 The pressure reducing valve is operated by water and does not require electricity.
Water
 In addition to the pressure reducing function, the following functions can be added as options. Water
level control / Flow rate control / Pressure sustaining / Shutoff in an emergency.
Installing ductile iron pipes
 No new electrical work is required.
Maintenance
(Completed in 2017)
Repair,
[Grant Aid for Environment and Climate Change for Escuela de Ciencias Forestales de la Universidad
 On the downstream side, the pipe type can be selected based on the set pressure. Therefore, the
Mayor de San Simon (Bolivia)]
Equipment,
material cost is more reasonable than cases where butterfly valves are used.
Product
We designed the layout of sprinklers and
plumbing in greenhouses, supplied the whole  It is possible to introduce the system even if the electric power supply is unstable.
system (greenhouses, sprinklers, irrigation Conditions for Using Technology
controller, soil injector, nursery pots, etc.) and  A hydrostatic pressure control system cannot be constructed under conditions that exceed the usage
Boring
dispatched supervisors.
range of the pilot type pressure reducing valves.
Outside and inside of the greenhouse
(Completed in 2019)  The difference between the upstream and downstream pressure shall be 0.07 MPa or more.
Waterproof
Work System  Diameter of pressure reducing valves: DN50-1200 for irrigation, DN50-800 for waterworks.
We have dispatched supervisors and managed the construction work at oversea sites.
Design
95 96
Construction
General
Air Dome Construction Method
Company ABE NIKKO KOGYO CO., LTD. Establishment 1949
Road
Employees 519 Website http://www.abe-nikko.co.jp Method of Constructing a Concrete Dome
Using a Membrane Material Supported by Air Pressure
Gifu Headquarters: 3-13-3 Rokujoomizo, Gifu City, Gifu
Address
Tokyo Headquarters: SK Building-S, 3rd Floor, 2-3-18, Shimoochiai, Shinjuku, Tokyo Dome Roof
Bridge
Name: Hirokazu DEGAWA Overseas Business Department Title: Manager
Contact
Overseas Branches Sri Lanka Liaison Office (Colombo)
Tunnel
Sri Lanka, Bangladesh, Africa, Middle East, South Pacific,
Bhutan, Vietnam, etc.
Supported Languages English, Chinese
Port
Business Overview
Field Water storage tanks Category Construction method
Improvement
[Core business] Construction of bridges and water tanks using prestressed concrete (PC) and
Ground
manufacture of sleepers for railways.
[Characteristics] - Construction of the first PC tank in Japan Technical Overview
- Pioneer of PC tanks --- Over 8,500 units in Japan 1. Applicable to the construction of concrete domes such as the roof of cylindrical PC tanks.
- Top share in domestic market for railway sleepers
Piling
2. Replaces conventional support work and formwork with a construction method in which a dome is
[Business description]
 Design and construction of PC structures (tanks, bridges, placed using a membrane material supported by air pressure and a mortar shell constructed on top
buildings, etc.) of it serves as the formwork support.
Slope
 Design and manufacture of PC sleepers 3. Consists of three parts: Membrane material, mortar, and air control system.
 Design and manufacture of secondary PC products
4. Track record of more than 300 units in Japan.
 Design and construction of reinforced concrete (RC) structures
 Design and manufacture of secondary RC products [Technical Features]
Plant
 Repair and reinforcement work for concrete structures (PC, RC) 1. Improvement of safety
[Main ordering party] In the past, total support was assembled on the inner surface of the tank, but since there is no such
Ministry of Land, Infrastructure, Transport and Tourism, local governments, PC Tank
Electricity,
expressway companies, railway companies including JR (Sri Lanka) process, dangerous work is eliminated and safety is improved.
Achievements in Japan and Overseas 2. Simplification of work

Since the work for support work and formwork is greatly reduced, the work of skilled workers such as
1981: Constructed PC tanks and PC bridges as a subcontracting business in Egypt and other countries.
scaffolders and carpenters is reduced, and the work is simplified.
Water
PC sleepers were exported to Vietnam and Indonesia.
2014: Sri Lanka, PC tank, participated in JICA support project 3. Shortening the construction period
"Verification Survey with the Private Sector for Disseminating Japanese Assembling and disassembling formwork support work and dome inner surface anticorrosion work
Maintenance
Technologies for Pre-stressed Concrete Tanks for Water Supply and
Repair,
are eliminated, shortening the construction period.
Sewage Treatment Systems”
2017: Sri Lanka Liaison Office established. 4. No need for anticorrosion measures and maintenance
2018: Dhaka Mass Rapid Transit Line 6 construction started (3 companies Railway PC Sleepers The film is left as is and used as an anticorrosive material.
Equipment,
Product
JV, construction management by prime contractor).
5. Eco-friendly
Work System Since no wood is used as the formwork material, no waste material is generated, which saves
 Cooperate in the design of low temperature tanks in the energy field. resources and is environmentally friendly.
 Cooperate as a subcontractor for construction of bridges, tanks, etc. in more than 15 countries
Boring
overseas.
Dispatch of engineers, design verification, delivery of materials and equipment. Technical guidance Can be applied to tanks with an inner diameter of up to 50 m.
and human resource development for local workers.
Waterproof
 Construction management as a prime contractor for the construction of Dhaka Mass Rapid Transit
Line 6.
Design
97 98
Construction
General
We can handle all plumbing work, from design to construction
Company SUGAWARA SETSUBI Inc. Establishment November 1998
Road
Employees 45 Website http://agile-innovation.co.jp/index.html We have official licenses from Tokyo and Aichi, enabling us to provide highly skilled services
Address 3-21-2 Motoderacho, Tsushimashi, Aichi, 496-0034, Japan
Bridge
Name: Masaki SATO Department: Sales
Contact
Tel: 0567-24-1743 E-mail: [email protected]
Overseas Branches Vietnam (Da Nang City), Myanmar (Da wey City)
Tunnel
Possible Implementation Areas Vietnam (Da Nang City only)
Supported Languages English (e-mail only), Vietnamese
Port
Business Overview
1. We are a member of the Agile Innovation Holding Company group, and provide water supply and Plumbing CAD design Civil engineering work
Improvement
drainage work services in Aichi Prefecture, Japan. Our company has a market share of about 10% in
Ground
Aichi Prefecture.
2. We are establishing a new service to provide training in technical skills within one year using Field Energy, health, poverty and infrastructure Category Method of construction
electronic manuals or remote systems.
Technical Overview
Piling
3. We could provide other construction services in addition to foundation work, such as installation of
side-ditches. [Technical Features]
* Agile Innovation Holding Company is the parent company of SUGAWARA SETSUBI Inc. It provides
Our company handles everything from design to construction by ourselves.
comprehensive services for house builders and individuals, including agency sales of LP gas and
Slope
design services. 1. Take advantage of our experience in installing the plumbing for over 1,000 houses and many small
Achievements in Japan and Overseas apartments per year. This enables us to handle various waterworks projects for houses, apartments, and
2019: We started SUGAWARA VIETNAM Co., Ltd., which provides original plumbing and piping plans. buildings.
Plant
2021: We plan to hire new employees and provide home remodeling to expand the business. 2. We are able to construct all plumbing, including septic tanks, elevated water tanks, and SWBPs which are
SUGAWARA VIETNAM Co., Ltd.: http://sugawaravietnam.com/lien-he.html being adopted in Vietnam.
Electricity,
1. “SUGAWARA VIETNAM Co., Ltd.” can respond quickly to local requests.
2. We can easily exchange ideas with each other concerning the design of the water supply system, and
construction by Vietnamese or Japanese personnel.
Water
1. Our skilled craftsmen instruct local staff on how to do plumbing and design.
Maintenance
Repair,
2. We would like to contribute to the regional economy by recruiting more people and expanding
“SUGAWARA VIETNAM”.
Equipment,
Product
 We are currently preparing to obtain constructing qualifications for plumbing in Vietnam.
Map of SUGAWARA VIETNAM Co,Ltd.  In order to start construction business, we are now investigating local suppliers in Vietnam.
Address: Nguyễn Hiến Lê, Hoà Xuân, Cẩm Lệ, Đà Nẵng 550000 Vietnam
Boring
Work System
 To pass on our knowledge and skills, we hire a few foreign trainees every year.
 To start the development of human resources with a high level technique or design in Vietnam, we
Waterproof
are implementing original remote education services.
 We have more than 30 craftsmen, enabling us to promptly and carefully handle issues.
Design
99 100
Construction
General
Efficient Water Environmental Improvement System
Company TBR Co., Ltd. Establishment June 1960
“BIO-CORD”
Road
Employees 34 Website https://www.tbrjp.co.jp Low-tech water quality improvement sustainable system utilizing microorganisms for
developing countries
Address 4-63, Odabuchi-cho, Toyokawa city, Aichi, 442-0844, Japan
Bridge
Name: T. KINOSHITA Environmental Division Title: Acting General Manager
Contact
Overseas Branches China (Shanghai)
Tunnel
Possible Implementation Areas East Asia, Southeast Asia
Supported Languages English (e-mail only), Chinese
Port
Business Overview
1. River purification business
Improvement
For rivers that are heavily polluted by domestic wastewater, mainly in developing countries, river Installed directly in shallow rivers Aeration type
Ground
purification is carried out by using a contact aeration purification system that is easy to maintain and
Field River purification / water purification Category System
a floating island construction method with BIO-CORD installed.
Registration,
2. Wastewater treatment business 1997: Science and Technology Commissioner's Award
Awards
Piling
Design, proposal and construction to strengthen the functions of wastewater treatment facilities in
Technical Overview
accordance with the wastewater treatment regulations of each country.
3. Manufacture and sales of braided ropes for fisheries, industry, and leisure
Slope
 "Bio-Cord" fixes a large amount of microorganisms to special fibers, and has the effect of increasing
the self-cleaning effect of rivers by simply laying them in rivers.
With a production base in China, we develop our business mainly in East Asia and Southeast Asia.  Compared to small-scale sewerage, the facility area is 1/3 and the maintenance cost can be reduced
Plant
[Original Technology] to 1/6 (in the case of a treatment facility of 500 m3/day).
We have manufacturing technology for microbial fixed beds, fiber filter media, artificial seaweed, etc.  Since oxygen is deficient in rivers with a high pollution load, aeration type is used.
 It is used not only for river purification but also for wastewater treatment in agricultural villages and
using braided rope manufacturing technology.
Electricity,
Achievements in Japan and Overseas landfill leachate treatment.
1995: Established a local subsidiary in Shanghai, China
 There is no difficult construction, allowing installation by workers in developing countries.
2010: Established a sales office in Shanghai, China
 Maintenance can be done by local workers by only removing the inflowing refuse and checking
Water
2010: "Dianchi Lake Water Purification Project", Kunming, China
operation of the equipment.
2012: "GOMBAK River Package 2" Malaysia RIVER OF LIFE Business [Contributions to Solving Issues]
Maintenance
2015: "Water Purification Project of Qiangwei Reservoir" in Lianyungang City, China  It has been adopted as a measure for domestic wastewater treatment until a sewage treatment plant
Repair,
2016: "Jinze Reservoir Water Purification Project", Shanghai, China is built. Since it can be installed in small community units, facilities can be built with a low budget.
2016: "Tainan Technology No. 1 Wastewater Treatment Project Reconstruction Project" Taiwan  Since maintenance can be done by local residents, it contributes to the creation of employment.
Equipment,
Product
2017: "GOMBAK River Package 3A & 3B" Malaysia RIVER OF LIFE Business
2019: "Galaxy Flood Reservoir Water Purification Project" Bekasi, Indonesia  In the location where it is installed directly in the river, it needs to be straight and the flow velocity is
Work System preferably 10 to 30 cm/sec.
 For rivers with a BOD of 100 mg/L or higher, use the aeration type.
Boring
 We have a local subsidiary in China and cooperate with several construction companies.
 Cannot be applied for rivers with a large influx of earth and sand. Therefore, it is better to target small
 Have formed alliances with contractors in Malaysia, Taiwan and Indonesia.
waterways through which only domestic wastewater flows, rather than large-scale rivers.
 In the case of rivers with a BOD of 400 mg/L or more, factory wastewater may flow in, so it is better
Waterproof
to take measurements on the factory side, which is the source of pollution.
Design
101 102
Construction
General
12000 Wells Drilled, 600 Hot Springs Drilled Since 1906
Company Ogushi Drilling Co., Ltd. Establishment 1906
Road
Employees 15 Website http://www.ogushi.co.jp Double Casing Method for Hot Spring Wells
Address Atsuhara 2202, Fuji City, Shizuoka, Japan
Bridge
Name: Hiromi AOKI Tokyo Head Office Title: Office Manager
Contact
Tel: +81 3 6893 2960 E-mail: [email protected]
Overseas Branches Uzbekistan, Afghanistan, China, Korea
Tunnel
English speaking areas in the above countries and surrounding
areas
Port
Business Overview Hot spring pump room: Hot spring: Mikuni Onsen in Fukui
Yugashima Hotel Resort
1. Well Drilling (Groundwater, hot spring, geothermal, gas, oil, earthquake/water quality observation
Improvement
wells) Double Casing method
Ground
2. Surveys incidental to wells (Electrical exploration, electromagnetic exploration, physical logging,
underwater television camera surveys) Field Drilling Groundwater Category Construction method
3. Equipment work incidental to wells (Well pump, hot water pump, air lift, filtration equipment, Registration, "Double casing method"
Piling
gasseparator, water supply / hot water, supply equipment) Awards Hot spring water pumping equipment and pumping method (Patent No. 3101183)
4. Maintenance of wells and equipment
Technical Overview
Slope
(1) Double Casing Method
We developed the "double casing method" as an improved method aiming for a larger amount and a Water from hot springs excavated deep in the earth tend to decrease in volume and go down in
higher temperature of hot water at the source in the event the amount of hot water pumped has temperature over time. As an improvement measure, the "double casing method" technology was
decreased over time. developed with the aim of recovering the volume and temperature of hot water.
Plant
A heat-retaining fiberglass pipe is inserted as a straw tube to the bottom of the hole, and hot water from [Merits of Adopting Technology]
the hot spring is pumped from the hot water vein at the bottom of the hole with a higher temperature. At  Increases the volume and temperature of hot spring water, and recovers the decreased volume and
Electricity,
the same time, the gas dissolved in the hot spring can be eliminated, enabling more efficient hot water
temperature of hot water.
pumping.
 Restoration of existing water sources is lower in cost and quicker than drilling new wells.
1. China: Hot Spring Survey in Lushun Konan Village
Water
The requirements for hot springs are set by the "Hot Spring Law" or related laws in each country.
2. Uzbekistan: Water Source Development in Fergana Region Wide Area
This is especially important in China, Taiwan, and other Asian countries where the development of hot
3. Kazakhstan: Hot spring development in Almaty city (consulting)
Maintenance
springs has been remarkable in recent years. The standards and guidelines are even stricter than in
Repair,
4. Afghanistan: Water source development in Kabul (consulting)
Japan.
The "double casing method" is effective for existing hot springs. It aims to restore aging hot springs that
Equipment,
no longer meet the "hot spring" standards by increasing the volume and temperature of hot water.
Product
[Video Link]
http://www.ogushi.co.jp/technology/
Boring
1.China 2. Uzbekistan 3. Kazakhstan
Work System  The well diameter (casing diameter) of the source must be 150 mm or more.
Uzbekistan: Local joint corporation  We will examine the effectiveness of this method by submitting the casing program and electrical
Waterproof
Afghanistan: Local joint corporation logging results in advance.
China / Korea: Local affiliated companies
Design
103 104
Construction
General
PALTEM Flooring method
Company SAWATA CONSTRUCTION CO., LTD. Establishment 1943
Road
This method regenerates and renovates decript pipes
Employees 86 Website https://www.sawata.com/
Address 1-23 Kaidenishimachi, Hofu, Yamaguchi, Japan
Bridge
Name: Shuji SAWASHIGE General Affairs Department
Contact
Tunnel
Supported Languages Vietnamese (Our two Vietnamese staff can correspond via e-mail.)
Port
Business Overview
1. General Construction Industry : Civil Engineering business, Building Service and design development
Improvement
2. Real Estate development business : Development of real estate for sales
Ground
Weekly Diamond, Japanese Special Journal for Business, ranked us 186 out of 1100 companies in
Japan. We were ranked number 1 in Yamaguchi Prefecture
Piling
(1) Agricultural Civil Engineering: Underdrain Construction, seat pipe method, drains water off farmland Renovation of sewage pipe,
Field Category Construction method
properly. maintenance of water
Registration,
(2) Agricultural Civil Engineering: FOEAS, Farm Oriented Enhancing Aquatic System, maintains We are certified by the PALTEM method association
Slope
Awards
groundwater level.
(3) Civil Engineering: PALTEM FR method, Pipeline Automatic Lining System Flooring method, repairs Technical Overview
Plant
inside of sewage pipe
(4) Cross Laminated Timber method: This method makes wood as strong as concrete We attach high density polyethylene fitting material and surfacing material with an iron ring assembled
inside pipes in the tube axis direction. The space between the existing pipe and renovation facing is
Electricity,
filled with filler in order to renovate the pipes. The renovated pipe is composite of the existing pipe and
[Achievements in Japan]
renovation material.
(1) Seat Pipe Method
(2) FOEAS 1
Water
March 2019 Scheme for Improvement of Agricultural Competitiveness
Our custom-made design can respond all types of requests: Any faults or strength problems in pipes
Infrastructure Scheme for Maintaining Farmland in Ueda Manabe region in Hofu
Maintenance
(3) PALTEM FR method
Repair,
2
September 2020 Scheme for life Elongation of Public Sewage ; improving old and
For the problem of deteriorated sewage pipes and pipes for supplying agricultural water, we preserve
dirty pipe in Hofu
Equipment,
them and prevent these pipes from losing their function.
Product
(4) Cross Laminated Timber method 3
October 2019 Construction of New Head Office Building
[Video Link]
Total Floor Area 1,192.8 m2 CLT used for this building : 97.3853 m3
http://www.paltem.jp/method/movie/fr201212.wmv
Boring
4
Sending our Japanese engineers, supervisor, and contractor is negotiable. Bringing in your equipment Round Form: 800 – 3,000 mm
Waterproof
is also negotiable. Not Round Form: Short side; More than 800 mm, Long side; Less than 5,000 mm
Design
105 106
Construction
General
Crack Repair Method, SAPIS
(Sakae Adjustable Pressure Injection System)
Company SAKAEGUMI Corporation Establishment 1955
Road
Employees 35 Website https://www.sakaegumi.jp/ Enables free adjustment of the injecting pressure, and injection of the crack repair material
Address 9-19-1 Itazawa, Kamigo-cho, Tono-shi, Iwate, Japan
Bridge
Name: Yoshihiro SASAKI
Contact
Overseas Branches Brazil, Indonesia (under preparation)
Tunnel
Possible Implementation Areas Brazil, Indonesia, USA
Supported Languages English, Portuguese
Port
Business Overview
1. General construction business
Improvement
Field Repair of concrete structures Category Construction methods and equipment
2. Repair and reinforcement work for concrete structures
Ground
3. Deterioration investigation, diagnosis, and repair and reinforcement design of concrete structures Registration, NETIS:TH-110002-A (SAPIS Vacuum Adsorption type), TH-110003-A (SAPIS Nozzle
Awards type), Patented in Japan, the U.S., Brazil and Indonesia
4. IP leasing business for Crack Injection technology (33 companies in JAPAN)
5. Management for the Society for Pressure Adjustment Grouting Technology Technical Overview
Piling
[Original Technology] [Technical Features]
(1) Sakae Adjustable Pressure Injection System (SAPIS): Patented in Japan, the U.S., Brazil and Improved repair performance: Injection pressure can be freely adjusted from low to high pressure,
Indonesia injection can even be performed for minute cracks, multiple materials can be injected continuously, and
Slope
(2) Sakae Infrastructure life prolongation work Maintenance Management system original construction management standards have been set.
Ministry of Economy, Trade and Industry: Selected as “Companies Driving Regional Growth” and “Small Excellent versatility and adaptability: All kinds of repair materials can be injected, from organic to
inorganic repair materials for civil engineering structures to buildings.
Plant
to medium enterprises and a small-scale enterprise 300 in 2020”
Achievements in Japan and Overseas Reduction of environmental impact: Zero waste discharge and shortened construction period reduce
environmental impact, and there is less loss of injection materials.
1. Domestic Achievements: 359 construction projects, as of July 2020
Electricity,
2. Overseas Achievements: Selected as [JICA SDGs Business Supporting Surveys 2018 (Partnership [Merits of Adopting Technology]
The following merits can be obtained while maintaining the same construction cost as before.
Promotion Survey) and 2019 (Business Model Formulation Survey)], Technical certification by the
1. It is possible to repair cracks and improve the soundness of the building frame at the same time.
Ministry of Public Works, Indonesia in 2019 (under review)
Water
2. It is possible to apply this technology to various types of cracks that cannot be handled with existing
technologies within the construction period.
Maintenance
Repair,
Extends the service life of existing concrete structures and reduces infrastructure maintenance costs.
The life cycle cost can be reduced and efficient construction investments can be made.
[Video Link]
Equipment,
Product
Repair of bridge piers Sewage Treatment Plant Repair of highway Technical Certification https://www.youtube.com/watch?v=czq1KPpKsK8
(Brasilia) (Sao Paulo) facilities (Jakarta) Board (Bandung)
https://www.youtube.com/watch?v=1GVMFiRXqu8
Work System
https://www.youtube.com/watch?v=D7bjQSwuP_E
We are preparing to set up local subsidiaries in Brazil and Indonesia. Based on these subsidiaries, we
Boring
will provide crack injection equipment and technical services, and promote the spread of preventive
There are no particular natural conditions (weather, temperature, etc.) that restrict construction.
maintenance technology for concrete structures by teaching repair and reinforcement techniques to local
Waterproof
Applicable to high or narrow places as long as there is enough space for manual labor.
engineers. In addition, we will collaborate with local vocational education institutions to train repair and
Work in water is not allowed.
reinforcement technicians and make international contributions.
Design
107 108
Construction
General
Rope Access Technology
Company EARTH SHIFT CO., LTD. Establishment 1983
Road
This technology enables close visual inspection of difficult to access places
Employees 62 Website https://www.earth-shift.co.jp/ such as bridges, dams, and slopes
Address 2-17-16 Yamazaki, Aoi-ku, Shizuoka-shi, Shizuoka, Japan
Bridge
Name: Satoshi MURAKAMI General Department Title: Director
Contact
Tunnel
Field Bridge surveys Category Construction method
Port
Business Overview
Technical Overview
1. General construction
Improvement
2. Infrastructure maintenance
Ground
This technology is an inspection technology that uses rope access. It allows difficult spots to be reached
3. Construction consultant (Design) using a special anchor.
4. Real estate [Merits of Adopting Technology]
The introduction of this technology eliminates the need for aerial work platforms, bridge inspection cars
Piling
and scaffolding. In addition, it does not require traffic restrictions.
(1) “Rope access”: Qualified person performs close visual inspection that cannot be handled by ordinary Conditions for Using Technology
inspection vehicles, such as wind power blades and bridges. Repair work can be done as needed. Natural conditions: It can be installed except in strong winds (over 15 m/s).
Slope
(2) “Single-i technology” (Micro-destructive inspection method inside concrete): With current non- Site conditions: No occupancy on the bridge
destructive tests, the state of fine cracks inside the concrete cannot be grasped. However, this Applicable area: Overseas correspondence is possible
method allows the situation inside the concrete to be grasped on site. As a result, it is possible to
Single-I method Technology
Plant
correctly grasp the damaged state of the floor slab, which is important for deciding on the
maintenance and repair measures for the structure.
Technology that enables damage to be accurately inspected inside concrete on site.
Electricity,
[Bridge inspection results with rope access]
 April 2016 – March 2017: 116 Bridges (EX: Shinsesso Bridge)
 April 2017 – March 2018: 355 Bridges (EX: JR overpass)
Water
 April 2018 – March 2019: 368 Bridges (EX: Highway viaduct)
 April 2019 – March 2020: 409 Bridges (EX: Sakura Bridge)
Maintenance
Field Concrete internal surveys Category Construction method
(EX: Wind power generation blades)
Repair,
 April 2020 – March 2021: 500 Bridges (Plans) (EX: JR overpass) Technical Overview
[Micro destruction survey results by single-i] [Technical Features]
Equipment,
Single-i method doesn’t cut rebar when drilling survey holes.
Product
 April 2018 – March 2021: 18 Bridges (EX: Highway)
Work System
Adhesion inspection of concrete can be accurately performed without any destruction.
Dispatch of Japanese engineers and technical guidance of local workers.  Measurement results can be checked in real time
Boring
We dispatch Japanese engineers to sites for both technologies, and train local engineers to develop  It greatly reduces skeleton damage.
 Due to the small diameter, it is possible to inspect even in places with high reinforcing bar density.
local business.
Waterproof
Natural conditions: Even when it rains, work can be performed by protecting the area.
Unable to work: Underwater
Applicable area: Overseas correspondence is possible
Design
109 110
Construction
General
Developing railway maintenance vehicles tailored to local needs
Company TOYO KIKAI Co., Ltd. Establishment 1947
Road
Employees 100 Website http://www.toyo-kikai.co.jp/ Please contact us concerning problems that need to be solved at the work site.
Address 1-5-30 KimachiDori Aoba-ku Sendai, Miyagi, 980-0801, Japan
Bridge
Name: Hiroshi SASAKI Title: CEO
Contact
Overseas Branches Thailand (Bangkok)
Tunnel
Possible Implementation Areas ASEAN countries
Port
Business Overview
Three Key Components:
1. Maintenance and Repair Services for Railway Maintenance Vehicles.
1. Hi-Brid System (with an engine and motor for dynamic force to avoid stopping on the rails.)
Improvement
Supporting the railway industry by suppling good quality railway maintenance vehicles.
Ground
2. Magnet Clutch (magnetic clutch able to hold high volume driving force with no contact.)
A maintenance agent of; 3. B. M. S. (Battery Management System designed to extend life of lead acid batteries)
Nippon Plasser K.K.
Field Support improving on site work Category Developing machine, equipment
Niigata Transys Co., Ltd.
Piling
Santo Co., Ltd. Technical Overview
NICHIJYO Corporation (cooperation factory)
2. R&D OF SPECIAL MAINTENANCE VEHCLES.
Slope
[Developed Aerial Work Platform]
Developing and manufacturing special vehicles based on customer needs and wants. Used for inspection of high tunnel walls and
3. R&D UNIQUE JIG AND MACHINARY FOR CIVIL ENGINNERING AND RAILWAY INDUSTRY. ceilings. The machine features a platform
Plant
Better tools for improving efficiency of field work for railway and construction business. that can move up and down as well as to
Achievements in Japan and Overseas the left and right a maximum of 400 mm.
[TRAM (Thai Railway Advanced Machinery Co., Ltd.)] A subsidiary company of Toyo-Kikai This function eliminates the need for
Electricity,
Launched office in Bangkok, Thailand in September 2019 workers to reach out from the vehicle to the
Began maintenance and repair activities of railway maintenance vehicles. wall which is unsafe.
We respond to monthly and annual maintenance needs as well as emergency repair work.
Water
Planning to expand business into Asian countries in the near future.
[Dust separator for ballast stone]
Our local partner, Thai Agency Engineering Inc., supports manufacturing capability for TRAM.
Crushed ballast stone must be cleaned at a
Maintenance
TRAM utilizes a human exchange program supported by ATOS to improve local engineering skills.
Repair,
certain interval. Traditionally, ballast stone
was cleaned off site. This machine
[Toyo-Kikai Co., Ltd. Sendai, Japan]
eliminates “stone replacement work” by
Equipment,
Product
Repair and maintenance of more than 400 special vehicles in Japan over 70 years.
performing the job on site.
Have a good reputation for inspection skill and immediate response for emergency trouble.
Dimensions Width: 2,300 mm
Work System
Length: 900 mm Height: 1,530 mm
Boring
JAPAN: 100 employees. 2 plants and 4 branch factories.
We will improve your on-site civil engineering work that entails many difficulties involving unnecessary
Waterproof
work, uneven quality, and unsafe work. We help enhance civil engineering work by developing machines
and equipment that makes your job easier.
Design
111 112
①
Construction
General
NINJA POWER SHEET
Company KFC Ltd. Establishment March, 1965
Road
Repair and reinforcement of various structures with special laminated fiber sheets that
Employees 282 Website https://www.kfc-net.co.jp/ excel in workability and reinforcement effect
Address 3-2-17 Nishi-Tenma, Kita-ku, Osaka, Japan [NINJA POWER SHEET] [Procedure]
Construction and Repair Technology General
Bridge
1 2 1. Applying adhesive
Name: Futoshi MATSUSHIMA
Contact Office, Technical Department Manager 2. Sheet attachment
Tel: +81-6-6363-4108 E-mail: [email protected] 3. Applying impregnating
material
Overseas Branches China (Tangshan, Hebei Province)
Tunnel
3 4 4. Completion
Possible Implementation Areas Thailand
Port
Repair and reinforcement of various types Construction methods and
Field Category
Business Overview of concrete and steel structures materials
[Manufacture and sales]
Improvement
Tunnel excavation materials, construction and civil engineering post- Technical Overview
Ground
construction anchors, rivet screws and other materials for concrete repair [Technical Features]
[Civil engineering business] ・ Special laminated fiber sheet: With this method, special laminated fiber sheets which are layered onto
Road and railway installation, tunnel interior construction and seismic special sheets with carbon fiber are bound to structures with adhesive resin, and then coated with a
retrofitting of civil engineering structures high-performance impregnating material.
Piling
・ Strength in fastening materials, e.g. anchors for construction in civil ・ Easy construction, no experience required for work: No need for deforming work due to highly
engineering permeable impregnating material
・ Top market share in Japan for rock bolts used in NATM for mountain tunneling methods ・ High-weight carbon can be used: Up to 2,400 g/m2 per layer of high-weight carbon fiber sheet can be
・ Abundant experience in Japan for earthquake-resistant shear reinforcement of civil engineering attached.
・ Short construction period: Multi-layered construction can be performed in one layer, enabling short
Slope
structures with RMA method.
[Original Technology] construction periods.
・ Numerous technologies in various fields including concrete repair and reinforcement, tunnel support, ・ Excellent flexibility: The flexible sheet enables easy attachment to corners
seismic retrofitting and safety countermeasures [Merits of Adopting Technology]
Achievements in Japan and Overseas ・ Compared with the conventional method (Continuous fiber sheet method), the construction cost can
Plant
2012: Establishment of Tangshan Rixiang Construction Materials＆Technologies Co., Ltd. in be reduced by shortening the number of construction days.
Tangshan, Hebei Province, People's Republic of ・ The high-performance impregnating material can be completely impregnated, so that high-quality
China; Started production of rock bolts construction workmanship is realized.
Electricity,
[Tunnel Auxiliary Method] ・ Since experience is not necessary for applying and impregnating the sheets, construction workers
can be easily recruited.
2009: Algeria East-West Expressway FIT Method (Long-
precedent construction with GFRP tubing and long- [Contributions to Solving Issues]
scope reinforcement) ・ It is possible to reduce the impact on traffic because the bridge reinforcement construction can be
implemented without restricting traffic in main lanes.
Water
2013: Hong Kong MTR XRL825 Construction Section Me
Method (Small-bore Steel Pipe Injection Type Long- ・ Short construction period reduces congestion caused by traffic regulation under bridges in the case
nose Receiver/Long-span Mirror Reinforcement Work) of construction with a high-lift work vehicle.
2016: Singapore LTA MRT T207 Silica Resin PUIF Construction Method (Resin-based Injection-type ・ Easy construction enables employers easily to recruit construction workers.
Maintenance
・ It is possible to reinforce existing structures inexpensively without carrying out large-scale
Repair,
Front Work)
2019: Indonesian ASAHAN3 Hydropower Plant AGF Method construction work.
(Grouting-type long-nose receiving) [Applicable Structures]
[Waterproof Sheet]
Equipment,
Product
2015: Vietnam Haivan Tunnel Waterproof Sheet (High Panel
SS Sheet)
[NINJA POWER SHEET]
2019: Thailand EXAT (Expressway Authority of Thailand) Trial
construction on actual bridge
Boring
[Rock Bolt]
2020: Nepal Nagdonga Pass Road Tunnel (SN Twist Rock Bridge Tunnel Box culvert
Bolt)
Waterproof
Work System
・ Dries concrete and steel surfaces if they are wet due to condensation etc.
Dispatch Japanese engineers and provide technical guidance to local workers as necessary. ・ Remove the fragile parts on the adhesive surface.
Design
113 114
Construction
General
High-quality and high-precision rebar processing
Company Toyo Kensetsu Kohki Co., Ltd. Establishment 1933
Road
http://www.toyokensetsukohki.co.jp Reformation of rebar industry – achieve sustainable development by saving labor and wastage
/english/
Address 2-4-15 Sangenya-Higashi, Taisho-ku, Osaka 551-0002, Japan
Bridge
Business Development Department,
Name: Ryosuke SONE Supervisor
Contact Global Business
Tunnel
Possible Implementation Areas Asia, Oceania, Middle East, Africa, etc.
Supported Languages English, Chinese, Korean
Port
Business Overview
Improvement
Though we rarely see rebar in our daily life, rebar are incorporated into architectural and civil engineering
Ground
structures, and play an important role in maintaining the strength to withstand disasters and accidents. Field Rebar/reinforcement work Category Machine and system
We at TOYO contribute to safe and secure life by providing the machines and systems to process rebar
Registration, Many patents, for example, rebar counter, combination cutting system, casting
with high quality and high efficiency.
Awards structure to achieve low noise emission, etc.
[Development, manufacture and sale of rebar processing machines]
Piling
We respond to customers’ requests for cutting and bending rebar in various situations based on our
proven trust and performance for over 60 years of experience in the rebar processing machine business. Technical Overview
[Comprehensive proposal of rebar processing factory] [Technical Features]
We propose a line system to increase the efficiency at the site where the rebar is discharged after cutting ・ Preciseness: Processed dimensions ±1 mm, processed angles ±1°excluding the effect of rebar
Slope
and transferred to bending station; and a centralized management system for rebar calculation, raw surface. (This precision does not apply to some models.)
material loading, rebar processing, and transferring & shipment of processed products. ・ Trusted processing quality: To meet the strict construction standards in the earthquake prone country
[Global sales] of Japan.
We provide solutions best-fitted to each customer and after-sales services in cooperation with our local ・ Automatic machine’s productivity per worker: Approx. 3 to 5 times compared to that with conventional
Plant
partners in South Korea, Taiwan, Singapore, Malaysia, Vietnam, Thailand, Indonesia, the Philippines,
manual machines. (Average production per worker with seven hours: 1~2 tons at construction site
Myanmar, Cambodia, etc. We also have an extensive sales record to the Middle East and Africa.
with manual machines, and 5~7 tons in factory with automatic machines)
Achievements in Japan and Overseas ・ Scrap reduction: Rebar scrap can be reduced by cutting out different lengths from one raw material.
Electricity,
1971: First overseas deal triggered by an inquiry from Singapore. [Merits of Adopting Technology]
2008: Delivery of automatic machines to the first rebar processing factory of a major general contractor ・ Uniformly aligned products make the assembling and installation of rebar easier and faster.
in South Korea. ・ Our products can handle the processing of high-strength rebar with higher earthquake resistance and
2012: Our automatic machines selected to meet the very strict requirements for rebar processing for of screw rebars which can reduce the labor on site and shorten the construction period. Our machines
Water
precast concrete elements for Hong Kong-Zhuhai-Macao Bridge construction project. are advancing together with the technology in the industry.
2017: Delivery of automatic machines to the largest steel mill in the Philippines. The machines are used [Contributions to Solving Issues]
for the Manila Metro Rail Transit System construction project. ・ Labor saving machines solve the issues of labor shortages and labor wage hikes.
Maintenance
2018: Delivery of automatic machines to the first rebar processing factory in Myanmar. ・ By processing rebars in a factory, no rebar fabrication space is needed at the construction site and
Repair,
2019: Delivery of rebar benders for high strength rebar to a major general contractor in the Philippines. workers’ safety will be enhanced. Other advantages are reduction of rebar wastage by product
The machines are used for the North-South Commuter Railway construction project site. management and quality control in a factory, and prevention of construction delays due to bad
2019: Achieve over 80 percent market share for rebar processing machines in Japan according to
Equipment,
weather.
Product
Teikoku Databank’s research. [Video Link]
2020: Delivery of automatic rebar processing machine to a major steel manufacturer during Covid-19 Automatic Cutting Machine: CS-185HB
pandemic.
Work System Automatic Bending Machine: TBS-13-6-NC: YouTube Channel
Boring
We basically send our engineer(s) to local customers’ factories at the time of new installation,
commissioning and operation guidance for automatic machines. We are now expanding our service Conditions for Using Technology
network so that we can provide attentive service for our products in cooperation with our local partners. ・ Use at ambient temperature of 0 to 40℃.
Waterproof
In areas without a local partner, we respond as soon as possible by phone, email, messaging app, etc. ・ Make sure to take measures against rainwater when machines need to be installed outdoors.
to cope with customers’ inquiries on operation, maintenance, and troubleshooting. To further improve ・ Use stabilizer or other measures against voltage fluctuation.
customer satisfaction, we are now strengthening support by developing IoT equipment. ・ Consult us regarding voltage, breaker capacity, and other details.
Design
115 116
Construction
General
Wedge-connecting scaffold with preceding handrail “ND System”
Company Nikken Lease Kogyo Co., Ltd. Establishment 1967
Road
Latest scaffolding system, which is safe and quick to assemble, can be fixed in 3 steps
Employees 1,400 Website http://www.nrg.co.jp/nikkenlease
Sumitomo Suidobashi Bldg. 3F, 2-7-8 Kanda Sarugakucho, Chiyoda-ku, Tokyo 101-
Address Smart Locking System with wedge Auto Locking System
0064, Japan
Bridge
Name: Masakazu ENDO Technical Security Headquarters Executive Officer 1 2 3
Contact Wed
Overseas Branches Vietnam, Myanmar, Philippines, Thailand
Tunnel
Possible Implementation Areas Southeast Asia Catchin
Supported Languages Overseas projects are handled by local staff in the local language
Port
Business Overview
Locking part
Our company rents more than 2,500 types of temporary equipment, such as scaffolding, shoring Release
Improvement
formwork and other items used at construction sites, as well
Ground
as temporary houses, desks, chairs, tables, storage lockers, Category External scaffolding and shoring Category System
office automation equipment, and electric appliances, mainly
Registration, NETIS: KT-160006-VE
to the construction industry. We also provide storage and
Awards Patent No. 5264008, Patent No. 5473039
transportation equipment and pallets for the logistics industry,
Piling
and welfare equipment.
Technical Overview
At present, we have more than 120 bases in Japan, and our
professional engineers prepare temporary construction plans [Technical Features]
and strength calculations for scaffolding, shoring, and
1. All components are divided into bar shapes, and the use of φ42.7 pipe makes even the heaviest
Slope
formwork for construction, provide assembly guidance and safety inspections, as well as BIM and CIM
planning. component only 11.1 kg in weight.
Overseas, we have bases in four countries (Vietnam, Myanmar, the Philippines, and Thailand), and we 2. "On-disk method" is adopted to fix the connecting materials. The assembly operation is surprisingly
are developing a rental business of temporary equipment for local construction companies. fast with only 3 steps.
Plant
Achievements in Japan and Overseas 3. "Auto-Locking System" uses standard joints for easy connection and unlocking, and it has excellent
We have participated in various construction and civil engineering projects and large-scale works in visibility.
Japan over the years. During this time, we have been involved in flagship projects listed below, providing
4. Preceding handrails have passed the "100kg fall arrest performance test" of the Temporary
Electricity,
the planning and rental temporary scaffolding and shoring materials for construction companies involved
Construction Industry Association in all directions.
in the building of Shinkansen (bullet train), expressways, and Olympic-related facilities, as well as the
Nhat Tan Bridge, Thai Binh Thermal Power Plant, and the Nghi Son Refinery in Vietnam. In recent years, [Merits of Adopting Technology]
we developed a new product named Darwin (ND System) as a wedge-tensioned scaffold with the  By dividing all the members into bar shapes and adopting thin pipes, the weight of the members
Water
handrail pre-installation method, which has become the mainstream in scaffolding, and has been highly becomes lighter, which improves cost-effectiveness and the speed of erection.
evaluated by customers for its excellent safety and work efficiency. In the field of temporary construction
 Using the on-disk method for wedges (horizontal members), the number of man-hours required for
planning, we are working to strengthen our technical capabilities to respond to BIM and CIM by
erection is decreased and the speed of construction is increased.
Maintenance
anticipating the rapid shift from 2D to 3D.
Repair,
 Preceding handrails are equipped as standard devices, enabling handrails to be maintained at the
top of the scaffold at all times. Accidents during erection and dismantling of scaffolds can be greatly
Equipment,
Product
reduced.
[Video Link]
https://www.youtube.com/watch?v=hof0X2kWkGI&t=9s
Boring
Construction site (Vietnam) Construction site (Thailand) BIM CIM  Do not carry out erection or dismantling work when danger can be anticipated such as during bad
Work System weather, including strong winds, heavy rain, or heavy snow.
Waterproof
1. Vietnam (Hanoi Head Office, Ho Chi Minh City Branch, Da Nang Sales Office), Myanmar (Yangon Strong wind: Wind with an average wind speed of more than 10 meters per second.
Branch), Philippines (Manila Branch), Kingdom of Thailand (Bangkok) Heavy rain: Rainfall of more than 50 millimeters at one time.
2. Overseas staff: 14 Japanese, about 300 locally hired staff (including about 100 CAD operators) Heavy snowfall: Snowfall of more than 25 cm at one time
Design
117 118
Construction
General
Smart Container town UV-C lamp & Off-grid installed
Company MATSUZAWA KAWARATEN Inc. Establishment June, 1948
Road
https://www.yane119.net We provide safe and clean habitat spaces at a low cost and high speed anywhere
https://7tsubaki.com
Address 3-32 Yokobori, Nakagawa, Nagoya City, Aichi Prefecture, Japan
Bridge
Name: Koki MATSUZAWA Overseas Business Department
Contact Tel: +81-70-8422-9287 (JPN)
E-mail: [email protected]
Tel: +63-977-778-3550 (PHIL)
Tunnel
Overseas Branches Philippines (Manila), Vietnam (Hanoi)
Possible Implementation Areas Philippines, Myanmar, Vietnam, Brunei and ASEAN regions
Supported Languages English, Filipino (Tagalog)
Port
Business Overview
Improvement
Nanatsubaki is a 100% subsidiary company of Matsuzawa Kawaraten which handles UV-C lamp Field Energy, health, poverty and infrastructure Category Product, system
Ground
business. Registered: United Nations Industrial Development Organization (UNIDO),
1. OFF-GRID Business: Composed with Solar-panels and LPG gas-generators to provide electricity in Registration, Department of Health, Philippines
unconnected areas. Used batteries are recycled and used as storage batteries. Awards Certificate: Aichi industrial science and technology center, food industry technology
2. UV-C Manufacturing/Sales: Deactivate virus and bacteria with UV-C lamp. center (Bacteria killing certificate)
Piling
3. Container Business: Remodel marine used containers to provide comfortable life-style space.
Combining these 3 technologies may provide COVID-19 treatment facility to ASEAN countries and Africa Technical Overview
regions. [Technical Features]
Slope
Examples: Refurbish marine used containers for habitats, warehouses and other facilities may provide Combining three technologies below enables habitat space, hygienic medical facilities and container
space for various needs. Easier to transport and easy to install. Each container may be adjusted and towns to be created from refurbished containers.
customized for individual needs.  Off-Grid System: Electricity generated by solar panels and LPG gas generator is used to charge
recycled lead-acid batteries. Ordinary household generator was converted to generation with LP gas,
Plant
Facilities composed of containers can be used for habitats, clinics, online education facilities; and toilets
with UV-C lamps may create safe, smart container towns (communities) anywhere. creating effective and sustainable system that recycles lead-acid batteries. The system was
Achievements in Japan and Overseas assembled in the Philippines.
 UV-C Lamp Deactivation system: 254 nm Wavelength UV-C lamp deactivates viruses and bacteria.
Electricity,
2010: Established Nanatsubaki, Started accepting disabled employees.
Moreover, this system safely and effectively deactivates viruses and bacteria in confined spaces
2012: Overseas expansion/Established Kawara factory in Vietnam/Established CAD center in the
under IEC62471 and Japan’s JIS safety standard.
Philippines.
 Container: Container is assembled in the Philippines. Container may be customized for local needs
2016: Vocational training school “Tone-Numata Techno Academy” as Director
Water
like African regions. Marine used containers with modified interiors can be transported by ship.
2020: “Regional disaster prevention cooperation office” and “Designated emergency evacuation
building”, agreement signed with Nagoya-City
 Systems installed in marine used containers can be transported worldwide, and after the container
We have installed more than one hundred UV-C lamps
Maintenance
arrives in the needed country, local staff can easily transport it by truck.
Repair,
in a manufacturing factory
of NIDEC in PEZA zone.
 This technique makes it possible to provide sanitary and safe living space in Africa, and by combining
UV-C 254 and 222 have
many different facilities in containers, it is possible to set up a smart container town in a place where
Equipment,
Product
been installed in toilets,
there is no water or electricity. By installing an online lesson system (online or computer) inside the
factories, canteens and
container, lessons can be provided in depopulated and poor areas in the same manner as in urban
shuttle buses. Installing
areas. The customization possibilities inside the container are endless, such as the enabling of fish
UV-C lamp inside the
farming on land.
Boring
shuttle bus may prevent the virus from outside the factory from entering the factory.
Work System
 Although off-grid has an LPG as generator for backup power, it is difficult to install it in areas with
 There are more than 2 Japanese specialists staying in the Philippines.
Waterproof
extremely heavy rain because it mainly generates electricity from sunlight.
 Holding training sessions and lectures for handling of UV-C lamps safely by local personnel.  For more details, concerns and questions please visit 7tsubaki.com or e-mail at koki-
 Main manufacturing factory is located in Shanghai China. [email protected].
Design
119 120
Construction
General
Sanwa Boring Co., Ltd. Boring technology to collect high-quality cores
Facing Nature and Imagining the Possibilities
Company Sanwa Boring Co., Ltd. Establishment May 4, 1967 Technology that provides useful geological information necessary for the detailed designs
Road
Employees 51 Website http://www.sanwa-boring.co.jp of important structures and the consideration of road disaster measures
Address 464-2 Horikawamachi, Toyama-shi, Toyama, Japan
Bridge
Name: Masaaki YUKAWA Title: President and CEO
Contact
Overseas Branches East Timor (plans to establish a local subsidiary in April of 2021)
High-quality core (left) versus general core (right)
Tunnel
Possible Implementation Areas Indonesia, East Timor * The core on the right contains fine particles and is generally messed up, making it impossible to
accurately determine the actual ground state.
Supported Languages English, Indonesian
The most important thing for collecting high-quality cores is the
control of drilling water. We use an original valve developed by our
Port
Business Overview
company to automatically and continuously supply the right amount
Sanwa Boring was founded in 1967 and mainly handles geological surveys as well as work to respond of water to the core tube with a pressure of 0.5 Mpm. This
to geological conditions. In particular, the company relies on its background in geology to provide
automated drilling water control can also handle cases where, for
Improvement
scientific geological information. The company focuses on work related to the boring of long, large-
Ground
diameter holes and provides expertise in terms of geological surveys and boring work. example, the hole is starting to get blocked, so even relatively
inexperienced operators can collect high-quality cores. This means
(1) Geological survey business
that local workers can more quickly be trained to a competent level.
 Geological surveys, surficial geological surveys
 Landslide surveys, stability analysis, Field Geological surveys, design of civil engineering structures Category System
Piling
countermeasure work design
 Residential geological surveys, ground guarantees Technical Overview
 Soil testing, rock testing [Technical Features]
 Soil contamination surveys The boring control items relevant for collecting high-quality cores are: (1) the management of circulating fluid
Slope
(2) Boring work business (water management), (2) the drilling rotation speed, (3) the drilling rod's penetration/pull-out strength, and (4)
 Various types of landslide countermeasure work, the drilling rod's ascent/descent timing. For our approach, the control items are managed as described below.
various types of slope protection work, ground Control item Method
anchor work A relief valve is used to automatically and continuously supply the
Plant
(1) Circulating fluid management right amount of water to the core tube with a pressure of 0.5 Mpm.
 Falling-rock and avalanche countermeasure work (water management) This approach can also handle changes in the boring-hole situation,
Achievements in Japan and Overseas such as when the hole is starting to get blocked.
Records of the rod rotation speed, amount of supplied water, and
Electricity,
Business name Location Category Client (2) Drilling rotation speed rod ascent/descent during excavation are measured, and this
Toyama Office of River and National information is organized/accumulated for each geological condition
Geological survey of rivers within the jurisdiction Within the jurisdiction Rivers MLIT
Highway (3) Drilling rod's penetration/pull-out and converted to a drilling-technology database. When doing on-
Riverbed material survey of the Jinzu River and Toyama Office of River and National strength site drilling work, digital measuring equipment can be installed to
Within the jurisdiction Rivers MLIT
Sho River Highway (4) Drilling rod's ascent/descent visually compare the drilling situation with past data in real time,
Water
Geological survey of Araya, Toyota Araya, Toyota, Toyama Roads MLIT
Toyama Office of River and National timing and utilized in the operator's drilling judgment during work.
Highway To collect high-quality cores, the general approach is to utilize the experience and intuition of the boring
Geological survey of the Osawano Toyama
Nirehara, Toyama Roads MLIT
Toyama Office of River and National operator to control each relevant item while working. Our company's original approach is to automate and
Minami Road Highway visualize work based on the statistical data analysis skills of veteran operators in order to enable the collection
Maintenance
Geological survey related to traffic safety within Toyama Office of River and National of high-quality cores even by non-veterans.
Repair,
Within the jurisdiction Roads MLIT
Toyama's jurisdiction Highway
Our company collects high-quality cores through boring 1. Boring survey technology for collecting high-quality cores by using survey equipment (boring machines,
that uses original core collection technology, thereby relief valves) can be provided.
Equipment,
2. Geological analysis technology based on the results of boring surveys, etc. as well as evaluation methods
Product
providing advanced geological information. This has
can be transferred to provide technology related to the design of civil engineering structures and road
resulted in an extensive track record of geological survey disaster measures based on useful geological information.
[High-quality core example] results for many infrastructure development projects. [Contributions to Solving Issues]
Work System To vitalize the private economic activity of developing countries, it is necessary to develop transportation
Boring
・ We are planning to send a Japanese engineer to East Timor to train around ten local workers there. networks and enhance the capabilities of both organizations and human resources in charge of managing
such development and follow-up maintenance. With our technology, geological technology at the level of
・ We have brought boring machines (a survey boring machine and rotary percussion drill for ground
Japan and other developed countries can easily be transferred.
anchor work) in from Japan. We are also planning to establish an equipment center in Dili, the capital
of East Timor. Conditions for Using Technology
Waterproof
・ We plan to establish a local subsidiary in East Timor. We will then use that as a base to train human The above technology is suitable for geological surveys of areas with complex ground structures, such as the
resources and help deal with the shortage of workers in Japan. crescent-shaped archipelago of Japan, as opposed to the primarily bedrock-based ground of the continents
・ We will try to use trained East Timor workers and engineers to expand into Indonesia. of Europe and America.
Design
121 122
Construction
General
Urethane・Polyurea spraying system
Company Chubukenzai Co., Ltd. Establishment 1982
Road
Drying time is short (Finger touch: 10 seconds, Walk: 3 minutes),
Employees 10 Website http://chubukenzai.pkit.com
shortening the construction period and reducing cost
Address 4-15-3 Miyoshi, Yatomi-City, Aichi, 498-0046, Japan
Bridge
Name: Chikara ITO Foreign Dep. Title: President
Contact
Tunnel
Possible Implementation Areas Vietnam, Myanmar, Indonesia
Supported Languages English (e-mail, simple conversation)
Port
Business Overview
1. Waterproofing 2. Corrosion protective coverings 3. Insulation 4. Painting
Improvement
Ground
(1) RIM (Reaction Injection Molding) system: This system uses a specific applicator with a 4 ton truck
as the mobile plant for waterproofing and corrosion protective covering. First, the material is heated
Slate roof sprayed with Polyurea Waterproof rooftop sprayed with Urethane
inside the pre-equipment to a temperature of 65 to 70 degree, and then liquid A and B are mixed at
the tip of the spray gun. After spraying, it turns into a gel form, which dries and solidifies in a couple Field Waterproofing work Category Construction method
Piling
of seconds. The sprayed material can be walked on in 3 minutes. This shortens the construction Suwael which is one type of Polyurea
Registration,
period and reduces costs. Conforms with Ordinance No. 15/JWWA K 143 of the Ministry of Health, Labor and
Awards
(2) Insulation spraying: We use the same machine system. The material is heated to approximately 40 Welfare Conformity. Highly safe material (Clean water tanks and fish farms)
degree. It then dries and solidifies in the same manner. It is used on walls, ceilings and floors. It
Slope
makes it warmer in the winter and cooler in the summer, while helping to prevent condensation. Technical Overview
(3) Non-combustible insulation: It is sprayed on the ceilings of elevator pits, machine rooms and walls. [Technical Features]
Fire protection is essential everywhere, including overseas. It is also effective in preventing injuries  Fast molding and solidifying, the material can be walked on in 3 minutes after spraying.
Plant
caused falling ceiling boards in earthquake prone countries.  Good workability on ceilings and vertical walls. There is no dripping and seamless coating is possible.
Achievements in Japan and Overseas  Excellent chemical resistance, weather resistance, and abrasion resistance.
2018, 2019: We participated in overseas support seminars for SMEs (Vietnam, Myanmar) [Merits of Adopting Technology]
Electricity,
2015: Renovation work for gymnasium ceiling at elementary school (1,800 m2)  Spraying system provides following benefits compared to hand-painted waterproofing
2018: Revetment work, Prevention of salt damage in concrete with RIM system (560 m2) 1. Shortens the drying period and construction period
2019: the ceiling insulation (1,400 m2) 2. Reduces labor cost
3. Total reduction of 10% in cost
Water
 At the time of regular factory renovation, our system enables work to be completed in a short period
while the production line is down.
Maintenance
Repair,
 Compared to new replacement of factory equipment, the life of equipment can be extended
 by this spraying system and costs can be effectively reduced (For example, tanks and pits)
 By eliminating waste, the economic cost for the nation can be reduced. It leads to job creation and
Equipment,
the transfer of technology to young people.
Product
[Video Link]
Non-combustible insulation Polyurea spray Insulation spray
http://chubukenzai.p-kit.com
Work System
Facebook: https://www.facebook.com/chubukenzai
Boring
 A local corporation will be established in Vietnam. Based there, we will develop human resources and Conditions for Using Technology
provide technical guidance.
 Can be constructed within 90 meters (the hose is 90 m long).
 We want to expand to Southeast Asia in the future.
 Need to protect from rain in areas where it rains during the rainy season.
Waterproof
 Two Vietnamese and two Chinese are working at the company, and three engineers will be hired
 Done using a specific applicator with a 4 ton truck as the mobile plant for waterproofing and corrosion
soon.
 We will increase the number of staff based on the core human resources and plan to expand. protective covering.
Design
123 124
Construction
General
3D Laser Measurement + Building Information Modeling
Company Archi-Cube INC. Establishment October 2000
Road
Employees 7 Website https://www.archi-cube.com/ This is a method for measuring buildings and their surrounding environment in 3D,
and using the data for everything from design to maintenance management
Address 6-28-2, Joto-dori, Gifu-shi, Gifu-ken, Japan
Bridge
Name: Yoshitomo OISHI Deployment Title: Representative Director
Contact
Tunnel
Possible Implementation Areas Vietnam, Taiwan, Cambodia
Supported Languages English, Vietnamese (e-mail, phone)
Port
Business Overview
We are an architectural design consultant specializing in the design of offices and factories, operating in
Improvement
Ground
the Nagoya region. When we build in a plant, we use a 3D laser scanner to accurately survey the point
clouds and then proceed with the design using the 3D modeling software Autodesk REVIT, so the client
Construction and civil engineering, research,
can make effective use of the space using 3D technology. During the design and construction phase, Field Category System
planning, design and maintenance
Piling
we propose a "visualization" of cost, design, and environmental performance. You can see it in a 3D Registration, The 1st Wooden Architecture AWARD Best of the Best Award
view (VR, etc.) so that your company can share the construction project. The 3D model data can be Awards The 1st Gifu Wooden House Building Contest, Excellence Award
used for facility management during construction and after completion, and in the future when installing Technology Overview
Slope
machine tools or updating lighting fixtures. For your project, our company’s female engineers with rich
experience will be involved in the design process, so we can build an environment where women can
 Design and supervision using 3D models based on Building Information Modeling (BIM) technology
work comfortably. We are also able to provide support for overseas projects in English and Vietnamese.
 Proposal of an efficient design method using a 3D laser scanner to measure the current conditions of
Plant
We have given many lectures at Autodesk University 2020 and other venues throughout Japan.
existing site.
Achievements in Japan and Overseas  Utilization of 3D data for post-construction maintenance (facility management)
Electricity,
[Japan] [Merits of Adopting Technology]
Design and supervision of a logistics warehouse (steel structure, approx. 8,000 m2) (photo at left)  Use VR and 3D views to enable real-time information sharing with people involved in the project.
Design and supervision of an office (steel structure, approx. 2,500 m2) (middle left)  We will show the technology overseas that has already become commonplace for projects in Japan
Water
[Vietnam] Design and construction of a nursery school in Buôn Ma Thuột, Vietnam (middle right photo) and provide a mechanism to utilize it in the future.
Design and construction of an office in Dak Lak Province (Ea Kiết) [Contributions to Solving Issues]
Maintenance
[Taiwan] Design of renovation of Chiayi Prison dormitory in Chiayi (right photo)  We can provide Japanese design and supervision technology and quality.
Repair,
 The technology can be disseminated to third countries through the country of introduction.
 We can expand our business not only in cities but also in rural areas by promoting the introduction of
Equipment,
design systems.
Product
[Video Link]
Work System
Boring
Established a local subsidiary in Vietnam (LIVE+VIETNAM) (Head office: Ho Chi Minh City, Branch Website (Japanese) Website (English) Instagram
office: Buôn Ma Thuột). The company will train Vietnamese engineers who can handle laser
Waterproof
measurement and 3D modeling, and expand its business to Vietnam and other third countries
None in particular
(Cambodia). (The company has business partnerships in Taiwan and Cambodia.)
Design
125 126
Japan Construction International Award Awarded Companies
(honored by the Minister of Land, Infrastructure, Transport and Tourism of Japan)
About Japan Construction International Award TAIYU KENSETSU Co., Ltd. 【1st SME Category】
The Ministry of Land, Infrastructure, Transport and Tourism of Japan established “Japan Construction International Award (honored by the
Minister of Land, Infrastructure, Transport and Tourism of Japan)” in 2017 to commend overseas construction projects as global showcase ●Business Description: Road construction, pavement construction, and others
of Japanese “quality infrastructure” initiatives which demonstrate Japan’s strengths. It also commends small- and medium-sized ●Overseas Business: South Korea, China, Vietnam, Thailand, Malaysia, and Philippines
construction companies(SME) which play leading roles in overseas markets. Through this award, we aim to promote global understanding ●Company Introduction: TAIYU KENSETSU developed excellent asphalt modifier for porous asphalt
of the Japanese campanies’ competitiveness and expect more projects to be carried out by Japanese companies. pavement, which were provisionally approved as new technology by Vietnamese government. With the
provisional approval, the company received orders on a continuous basis.
●Overview of Overseas Business:
● The company started its overseas business from sales of its own technology and pavement material in 2000.
Kidoh Construction Co., Ltd. 【1st SME Category】 ● The company sets asphalt modifier for porous asphalt pavement as main products, explained the products' excellent qualities and strong
effectiveness as well as their production methods, offered and executed trial construction, and evaluated the results from the trials. Through
●Business Description: Underground pipe laying works using various pipes by pipe jacking method such activities, the company was highly evaluated by Vietnamese government and companies, and then received a number of orders.
●Overseas Business: Taiwan, Malaysia, Singapore, Vietnam, Indonesia, and Myanmar ● The porous asphalt pavement using this asphalt modifier was provisionally approved as new technology by Vietnamese government in 2016.
●Company Introduction: Kidoh Construction receives orders in Indonesia and Myanmar on a continuous Then, the company offered and executed trial construction in Thailand and Malaysia and those trials were highly evaluated.
basis through its excellent pipe jacking method technology and its dissemination and market education
activities.
● The Ministry of Foreign Affairs supports ODA-related projects for medium and small companies. Thanks to such support, in 2012, Kidoh
Construction received an order for a dissemination project for pipe jacking method technology in Indonesia.
● The company promoted the superiority of pipe jacking method technology in Southeast Asian countries including Vietnam and Indonesia. At Sakai Heavy Industries Ltd. 【1st SME Category】
the same time, the company cooperated with local parties to prepare specification standards regarding technology and estimation.
● The company has engaged in construction in Malaysia, Singapore, and Vietnam. In addition, the execution of a long-distance pipe jacking
●Business Description: Manufacturing and sales of heavy construction equipment
construction project with full-scale adoption of Japanese technologies in Myanmar has been determined this fiscal year. ●Overseas Business: Indonesia, United States, China, Thailand, and Bahrain
●Company Introduction: Sakai Heavy Industries manufactures and sells excellent heavy construction
equipment and machinery. The company has a business style that it expands its sales routes while
TAMADA CORPORATION 【1st SME Category】 offering technical guidances locally.
● Sakai manufactures and sells road rollers, stabilizers, and road cutters as its main business. The company started its export business from
●Business Description: Design and production of underground tanks and fireproof water tanks
●Overseas Business: Vietnam export of road rollers to Thailand in 1935. Then, after 1950s, the company exported road rollers mainly to Asian countries including
●Company Introduction: The company has a patent of a forming method in Japan. With the patented Philippines.
● Thereafter, the company established manufacturing/sales bases in Indonesia, United States, China, and other countries to sell its products
forming method, the company manufactures and sells double-wall tanks and licenses in lining treatment
(layer laminated with fiber-reinforced plastic) of aged underground tanks. Through such activities, the to more than 130 countries through its networks of over 100 worldwide agencies.
company received orders on a continuous basis.
● Based on a JICA-related project which adopted SF (steel fiber-reinforced plastic) double-wall tanks in Vietnam, Tamada established a local
subsidiary in Vietnam and manufactures canned products including underground tanks and fireproof water tanks and sells them to Southeast
Asian countries. NISSAKU CO., LTD. 【2nd Construction Project Category】
● The company manufactures and sells SF double-wall tanks and licenses technology for lining treatment of such tanks to non-Japanese
manufacturers and contractors in ASEAN countries.

●Project name: The Project for Safe Water Supply and Improvement of Hygiene Conditions in Rural Areas
●Country of the Location: Senegal
Jesco Holdings, Inc. 【1st SME Category】 ●Project overview:
● This project provided water supply facilities to use safe groundwater and sanitation facilities in rural
areas in Senegal where basic infrastructure, such as electricity and water, was insufficient.
●Business Description: Construction of electric facilities and telecommunication facilities ● New construction of water supply facilities, including deep well drilling, pumping facilities, long-distance
●Overseas Business: Vietnam, Singapore, and Malaysia gravity-based water supply pipes using elevated water tanks, and various types of water faucets for public use.
●Company Introduction: JESCO strategically expands its business in both design, integration, and ● Administrative officers and local residents were taught to perform light repairs, etc. with the aim of continuous maintenance. The project
construction through accurate risk management and receives substantial business in Asian regions. contributed to improving habits and sanitation in public restrooms and at handwashing locations installed in schools and medical facilities.
● Dispatch of engineers from Japan to the construction site for KLCC in Malaysia was an opportunity for JESCO for its full-scale business
penetration into ASEAN countries.
● 2001 in Vietnam, JESCO established a subsidiary, which plays a Strategic role in its overseas business.
● JESCO conducted design, integration, and construction management, which were associated with construction of electric facilities and
telecommunication facilities. The company received a number of orders which were mainly ODA-related infrastructure construction NIKKEN KOGAKU CO.,LTD. 【2nd SME Category】
including construction of Noi Bai International Airport Terminal 2. Based on such track records. the company expanded its business to
receive orders from the neighboring countries.
● In Vietnam, constructions of high-rise condominium are increasing in number. On this background, the company received a large-scale ●Business Description: Development and sales of disaster management technology
project of 760 million yen in 2017. ●Overseas Business: Korea, Vietnam, Indonesia
●Company Introduction: NIKKEN KOGAKU CO.,LTD. established a business development scheme of
promoting of technologies in local markets through verifying effectiveness of its technology by using
network among local universities and researchers.
Yasuda Engineering Co., Ltd. 【1st SME Category】 ●Overview of Overseas Business:
● NIKKEN KOGAKU CO.,LTD. established its business style in mid-long term perspectives, through assessing and evaluating the wave
●Business Description: General construction and propulsion works dissipating block technology to prove its advantage, thus contributing to enhancing its recognition and business activities by collaboration
●Overseas Business: South Korea, Taiwan, Vietnam, and Indonesia with local universities and research institutes.
●Company Introduction: Yasuda Engineering Co., Ltd. utilizes its excellent propulsion-method technology ● In 2012, a representative office was established in Hanoi, Vietnam. Its own technology was registered as the National Standard of Vietnam
and business strategies to secure orders including a large-scale project of approximately 10.4 billion yen. (TCVN) through performance evaluation jointly conducted with Water Resource University in Vietnam. It was applied at a large scale project,
At the same time, the company largely contributed to technical transfer to Vietnam organizations. such as Nghi Son Refinery development project.
●Overview of Overseas Business: ● NIKKEN KOGAKU CO.,LTD. has spread their products which emphasize life-cycle cost by using toughness and resilient structure. In
● Japanese and Vietnamese governments signed a memorandum on technical cooperation regarding sewage technology in 2010. Based on
FY2018, work expanded in Vietnam with a roughly 157-million-yen order for the “Chan May Port Breakwater” Project.
the memorandum, Yasuda started its business expansion in Vietnam.
● Yasuda made presentations of its propulsion-method technology and created Vietnamese-version of codes and standards for the propulsion
method. Through such activities, the company promoted spread of propulsion-method technology.
● Yasuda accepted technical interns, employ them after their return to Vietnam, and, in collaboration with local construction companies,
provides personnel training. Through such activities, Yasuda largely contributes to technical transfer of its propulsion method.
127 128
Overseas
Overseas expansion
expansion support
support for small and medium-sized construction
construction enterprises
enterprises(SMEs)
(SMEs)
The
TheMinistry
MinistryofofLand,
Land,Infrastructure,
Infrastructure,Transport
Transportand
andTourism
Tourismestablished
established the
the Japan
Japan Association
Association of
of Small
Small Past Activities
Activities
and
Past
and Medium-sized Enterprises for Overseas Construction (JASMOC) on June 12, 2017 for the purpose of
Medium-sized Enterprises for Overseas Construction (JASMOC) on June 12, 2017 for the purpose of
assisting
assistingSMEs
SMEswithwithoverseas
overseasexpansion.
expansion.
Purpose
Purposeof
ofJASMOC
JASMOC
Some
Somesmall
smalland
andmedium-sized
medium-sized construction
construction enterprises
enterprises (SMEs)
(SMEs) in in Japan
Japan whose
whose unique
unique skills
skills and
and
technologies
technologies would be well received abroad and that are keen to expand into international markets are
would be well received abroad and that are keen to expand into international markets are
hesitant to do so due to a lack of the necessary knowledge and know-how. To remedy
hesitant to do so due to a lack of the necessary knowledge and know-how. To remedy this, JASMOC this, JASMOC
collaborates
collaborateswith
with corporations,
corporations, industry
industry groups,
groups, expert
expert advisors
advisors and
and support
support organizations
organizations such
such as
government-affiliated agencies and financial institutions. Its activities include sharing important
government-affiliated agencies and financial institutions. Its activities include sharing important informa-informa-
tion
tionand
andissues
issuesrelated
relatedtotooverseas
overseas expansion
expansion and
and hosting
hosting seminars
seminars to to promote
promote greater
greater utilization
utilization of
support
supportmeasures
measuresprovided
providedby byrelevant
relevantorganizations.
organizations.
Overseas expansion
Overseas expansion seminars
seminars in
in Tokyo
Tokyoand
andOkinawa
Okinawa
Composition
Compositionof
ofJASMOC
JASMOC (as
(asof
ofMarch
March2021)
2021)
●Member
●Membercompanies:
companies:226
226small
smalland
andmedium
mediumconstruction
constructionenterprises
enterprises
●Member
●Memberorganizations,
organizations,etc.:
etc.:12
12industry
industrygroups,
groups,etc.
etc.
●Advises:
●Advises:an
anuniversity
universityprofessor,
professor,44SME
SMEmanagement
managementconsultants,
consultants, etc.
etc.
●Supporter:
●Supporter:97
97organizations
organizations
Government-affiliated
Government-affiliated agencies:
agencies: JICA,
JICA, JETRO,
JETRO, Small
Small and
and Medium
Medium Enterprise
Enterprise Agency,
Agency,
Organization
OrganizationforforSmall
Small&&Medium
MediumEnterprises
Enterprises and
and Regional
Regional Innovation,
Innovation, Ministry
Ministry of
of Foreign
Foreign
Affairs,
Affairs,Ministry
Ministryofofthe
theEnvironment,
Environment,diplomatic
diplomaticestablishments
establishments abroad,
abroad, etc.
etc.
Financialinstitutions:
Financial institutions:Banks,
Banks,credit
creditbanks.
banks.
Etc.
Etc.
Activities
Activities
Business
Business matching
matching in
in Hanoi
Hanoi Job
Jobfair
fairininHo
HoChi
ChiMinh
Minh
●Overseasexpansion
●Overseas expansionseminar
seminar
Share information
Share information for for overseas
overseas expansion,
expansion, introduce
introduce examples
examples of of companies
companies that
that have
have actually
actually
expandedoverseas,
expanded overseas,provide
provideinformation
informationfrom
fromsupport
supportorganizations,
organizations,and and share
share advanced
advanced information
information of
overseas delegation before
overseas delegation before dispatching dispatching
●Dispatchingoverseas
●Dispatching overseasdelegation
delegation(consists
(consistsofofMLIT
MLITandandSMEs)
SMEs)
- -Visit
Visitlocal
localgovernments,
governments,local localJapanese
Japaneseconstruction
constructioncompanies,
companies, andand construction
construction sites
sites
- Promote SMEs construction
- Promote SMEs construction technologies technologies
- -Conduct
Conductbusiness
businessmatching
matchingwithwithlocal
localconstruction
constructioncompanies
companies
- Host Job fair with cooperation of local
- Host Job fair with cooperation of local university university
(Pastdispatched
(Past dispatchedcountries:
countries:Vietnam,
Vietnam,Philippine,
Philippine,Cambodia)
Cambodia)
● JASMOCGeneral
●JASMOC Generalmeeting
meeting
Review past JASMOC
Review past JASMOC activities activitiesand
andshare
shareactions
actionsofofnext
nextfiscal
fiscal year
year
●Subcommitteesofofindividual
●Subcommittees individualissues
issues
Considerindividual
Consider individualissues
issuesforforbusiness
businessexpansion
expansionand andshare
sharerelated
related information
information
● Collection of Construction Technologies
●Collection of Construction Technologies
Introduceexcellent
Introduce excellentconstruction
constructiontechnologies
technologiesof of JASMOC
JASMOC members
members inside
inside and
and outside
outside Japan
Japan so
so that
that
they could expand their business
they could expand their business overseas overseas
●JASMOC newsletters
●JASMOC newsletters
Regularly
Regularly send send JASMOC
JASMOC newsletters
newsletters with
with support
support menus
menus from
from support
support organizations
organizations and
and related
related
information for overseas
information for overseas expansion expansion
129
129 130
130
Index
Index
Indexby
by
byOverseas
Overseas
OverseasBranches
Branches
Branches
Socialist
Socialist
SocialistRepublic
Republic
Republicof
ofofViet
Viet
VietNam
Nam
Nam Kingdom
Kingdom
Kingdomofof
ofThailand
Thailand
Thailand Republic
Republic of
Republic of Singapore
of Singapore
Singapore Unites
UnitesStates
Unites States
Statesof
of
ofAmerica
America
America
Hashimotogumi
Hashimotogumi
HashimotogumiCorporation:
Corporation:
Corporation:General
General
GeneralConstruction
Construction
Construction....
....
....555 Sakai
Sakai
SakaiHeavy
Heavy
HeavyIndustries
Industries
IndustriesLtd.:
Ltd.: Road..............................
Ltd.:Road
Road ..............................
..............................99
9 Sanko
Sanko Co.,
Sanko Co., Ltd.:
Co., Ltd.: Plant ...............................................
Ltd.: Plant
Plant ...............................................73
............................................... 73
73 Sakai
SakaiHeavy
Sakai Heavy
HeavyIndustries
Industries
IndustriesLtd.:
Ltd.:
Ltd.:Road
Road ..............................
..............................999
Road..............................
Hiraiwa
Hiraiwa
HiraiwaConstruction
Construction
ConstructionCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:General
General Construction...
GeneralConstruction
Construction ...
...777 Akros
Akros
AkrosTrading
Trading
TradingCo.,
Co.,
Co.,Ltd.:
Ltd.: Road...................................
Ltd.:Road
Road ...................................
...................................15
15
15 JESCO
JESCO Holdings,
JESCO Holdings, Inc.:
Holdings, Inc.: Electricity,
Inc.: Electricity, Communication
Electricity, Communication ....
....81
Communication.... 81
81 Tokyo
TokyoRope
Tokyo Rope
RopeMfg.
Mfg.
Mfg.Co.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Slope
Slope ..............................
..............................71
Slope.............................. 71
71
Taiyu
Taiyu
TaiyuKensetsu
Kensetsu
KensetsuCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Road
Road
Road .................................
.................................
.................................11
1111 Kochi
Kochi
KochiMarutaka
Marutaka
MarutakaCo.,
Co.,
Co.,Ltd.
Ltd.
Ltd.(candidate):
(candidate):
(candidate):Bridge
Bridge ...........
...........
Bridge ...........17 17
17 People’s
People’s Republic
People’s Republic of
Republic of China
of China
China Sanko
SankoCo.,
Sanko Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Plant
Plant ...............................................
...............................................73
Plant............................................... 73
73
Okasan
Okasan
OkasanLivic
Livic
LivicCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Road
Road
Road.....................................
.....................................
.....................................13
13
13 Sanko
Sanko
SankoCo.,
Co.,
Co.,Ltd.:
Ltd.: Plant...............................................
Ltd.:Plant
Plant ...............................................
...............................................73
73
73 Sakai
Sakai Heavy
Sakai Heavy Industries
Heavy Industries Ltd.:
Industries Ltd.: Road..............................
Ltd.: Road
Road ..............................999
.............................. Federative
FederativeRepublic
Federative Republic
Republicof
of
ofBrazil
Brazil
Brazil
Akros
Akros
AkrosTrading
Trading
TradingCo.,
Co.,
Co.,Ltd.:
Ltd.: Road...................................
Ltd.:Road
Road ...................................
...................................15
15
15 Toyo
Toyo
ToyoKikai
Kikai
KikaiCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Repair,
Repair, Maintenance...............
Repair,Maintenance
Maintenance ...............
...............111
111
111 Akros
Akros Trading
Akros Trading Co.,
Trading Co., Ltd.:
Co., Ltd.: Road...................................
Ltd.: Road
Road ...................................15
................................... 15
15 Sakaegumi
SakaegumiCorporation
Sakaegumi Corporation
Corporation(in
(in
(inpreparation):
preparation):
preparation):Repair,
Repair, Maintenance......
Repair,Maintenance
Maintenance ...107
107
107
Kochi
Kochi
KochiMarutaka
Marutaka
MarutakaCo.,
Co.,
Co.,Ltd.
Ltd.
Ltd.(candidate):
(candidate): Bridge...........
(candidate):Bridge
Bridge ...........
...........17
17
17 Nikken
Nikken
NikkenLease
Lease
LeaseKogyo
Kogyo
KogyoCo.,
Co.,
Co.,Ltd.:Equipment,
Ltd.:Equipment, Product...
Ltd.:Equipment,Product
Product ...
...117
117
117 Rontai
Rontai Co.,
Rontai Co., Ltd.:
Co., Ltd.: Slope..............................................
Ltd.: Slope
Slope ..............................................67
.............................................. 67
67
Kawakin
Kawakin
KawakinCore-Tech
Core-Tech
Core-TechCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Bridge
Bridge ........................
........................
Bridge ........................23
23
23 Republic
Republic
Republicof
of
ofthe
the
thePhilippines
Philippines
Philippines Tokyo
Tokyo Rope
Rope Mfg.
Rope Mfg. Co.,
Mfg. Co., Ltd.: Slope..............................
Ltd.: Slope ..............................71
71
Yasuda
Yasuda
YasudaEngineering
Engineering
EngineeringCo.,
Co.,
Co.,Ltd.:
Ltd.: Tunnel.......................
Ltd.:Tunnel
Tunnel .......................
.......................25
25
25 Marutai
Marutai
MarutaiDoboku
Doboku
DobokuCorporation
Corporation
Corporation(plan):
(plan): Piling................
(plan):Piling
Piling ................65
65 ITO
ITO Corporation:
Corporation: Plant...............................................
Corporation: Plant ...............................................77
77
Sohatsu
Sohatsu
SohatsuSystems
Systems
SystemsLaboratory
Laboratory
LaboratoryInc.:
Inc.:
Inc.:Tunnel
Tunnel
Tunnel .................
.................
.................33
33
33 Tokyo
Tokyo
TokyoRope
Rope
RopeMfg.
Mfg.
Mfg.Co.,
Co.,
Co.,Ltd.:
Ltd.: Slope..............................
Ltd.:Slope
Slope ..............................
..............................71
71 Kyowakiden
Kyowakiden Industry
Kyowakiden Industry Co.,
Industry Co., Ltd.:
Ltd.: Water Environment......91
Water Environment 91
Nikken
Nikken
NikkenKogaku
Kogaku
KogakuCo.,
Co.,
Co.,Ltd.:
Ltd.: Port...................................
Ltd.:Port
Port ...................................
...................................35
35
35 Sanko
Sanko
SankoCo.,
Co.,
Co.,Ltd.:
Ltd.: Plant...............................................
Ltd.:Plant
Plant ...............................................
...............................................73
73 TBR
TBR Co.,
Co., Ltd.:
Co., Ltd.: Water
Ltd.: Environment..........................
Water Environment ..........................101
101
Onoda
Onoda
OnodaChemico
Chemico
ChemicoCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Ground
Ground
GroundImprovement
Improvement ......
Improvement ......37...... 37
37 Nikken
Nikken
NikkenLease
Lease
LeaseKogyo
Kogyo
KogyoCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Equipment,
Equipment,
Equipment,Product Product 117
Product ...
... 117 Ogushi
Ogushi Drilling
Drilling Co.,
Drilling Co., Ltd.:
Ltd.: Water
Water Environment
Environment ..........
.......... 103
103
Tenox
Tenox
TenoxKyusyu
Kyusyu
KyusyuCorporation:
Corporation:
Corporation:Ground
Ground Improvement....
GroundImprovement
Improvement ....
....39
39
39 Matsuzawa
Matsuzawa
MatsuzawaKawaraten
Kawaraten
KawaratenInc.:
Inc.:
Inc.:Equipment,
Equipment, Product....
Equipment,Product
Product ....119
119 KFC
KFC Ltd.:
Ltd.: Repair,
Ltd.: Maintenance...............................
Repair, Maintenance
Repair, ...............................113
113
Murakamijuuki
Murakamijuuki
MurakamijuukiCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Ground
Ground
GroundImprovement
Improvement
Improvement.........
.........
.........43
43
43 Republic
Republic
Republicof
of
ofIndonesia
Indonesia
Indonesia Hong
Hong Kong
Kong
Kong
SST
SST
SSTAssociation
Association Inc.
AssociationInc.
Inc.(under
(under
(underexamination):
examination):
examination):Ground
Ground Improvement...
GroundImprovement
Improvement ......45
45
45 Sakai
Sakai
SakaiHeavy
Heavy
HeavyIndustries
Industries
IndustriesLtd.:
Ltd.: Road..............................
Ltd.:Road
Road ..............................
..............................99 Akros
Akros Trading
Trading Co.,
Trading Co., Ltd.: Road...................................
Ltd.: Road ...................................15
15
Ozawa
Ozawa
OzawaCivil
Civil
CivilEngineering
Engineering
Engineeringand
and
andConstruction
Construction
ConstructionCo.,
Co.,
Co.,Ltd.:
Ltd.:
Ltd.:Piling
Piling
Piling...
......55
55
55 Akros
Akros
AkrosTrading
Trading
TradingCo.,
Co.,
Co.,Ltd.:
Ltd.: Road...................................
Ltd.:Road
Road ...................................
...................................15
15 Republic
Republic of
Republic of Korea
of Korea
Korea
Nihon
Nihon
NihonBase
Base
BaseCo.,
Co.,
Co.,Ltd.:
Ltd.: Piling......................................
Ltd.:Piling
Piling ......................................
......................................57
57
57 Kidoh
Kidoh
KidohConstruction
Construction
ConstructionCo.,
Co.,
Co.,Ltd.:
Ltd.: Tunnel.........................
Ltd.:Tunnel
Tunnel .........................
.........................27
27 Yasuda
Yasuda Engineering
Engineering Co.,
Engineering Co., Ltd.:
Ltd.: Tunnel .......................25
Tunnel....................... 25
Hassyu
Hassyu
HassyuKenki
Kenki
KenkiCo.,
Co.,
Co.,Ltd.:
Ltd.: Piling...................................
Ltd.:Piling
Piling ...................................
...................................59
59
59 Sanko
Sanko
SankoCo.,
Co.,
Co.,Ltd.:
Ltd.: Plant...............................................
Ltd.:Plant
Plant ...............................................
...............................................73
73 Tenox
Tenox Kyusyu
Kyusyu Corporation:
Kyusyu Corporation: Ground
Ground Improvement ....39
Improvement.... 39
FutabaCorporation:
Futaba
Futaba Corporation:Piling
Corporation: Piling
Piling .........................................61
.........................................
......................................... 61
61 SakaegumiCorporation
Sakaegumi
Sakaegumi Corporation(in
Corporation (inpreparation):
(in preparation):Repair,
preparation): Repair, Maintenance...
Repair,Maintenance
Maintenance ...107
107 ITO Corporation:
ITO Corporation: Plant...............................................
Corporation: Plant ...............................................77
77
RontaiCo.,
Rontai
Rontai Co.,Ltd.:
Co., Ltd.:Slope
Ltd.: Slope ..............................................67
Slope..............................................
.............................................. 67
67 Malaysia
Malaysia
Malaysia Ogushi Drilling
Ogushi Drilling
Drilling Co.,
Co., Ltd.:
Ltd.: Water Environment..........
Water Environment ..........103
103
SankoCo.,
Sanko
Sanko Co.,Ltd.:
Co., Ltd.:Plant
Ltd.: Plant ...............................................73
Plant...............................................
............................................... 73
73 AkrosTrading
Akros
Akros TradingCo.,
Trading Co.,Ltd.:
Co., Ltd.:Road
Ltd.: Road ...................................15
Road...................................
................................... 15 The Democratic
The Democratic
Democratic Republic
Republic of
of Timor-Leste
Timor-Leste
SoltecIndustries
Soltec
Soltec IndustriesCo.,
Industries Co.,Ltd.:
Co., Ltd.:Plant
Ltd.: Plant ...............................75
Plant...............................
............................... 75
75 SankoCo.,
Sanko
Sanko Co.,Ltd.:
Co., Ltd.:Plant
Ltd.: Plant ...............................................73
Plant...............................................
............................................... 73 Sanwa Boring
Sanwa Boring
Boring Co.,
Co., Ltd.
Ltd. (plan): Boring.....................
(plan): Boring .....................121
121
ITOCorporation:
ITO
ITO Corporation:Plant
Corporation: Plant
Plant ...............................................
...............................................
...............................................77 77
77 JESCOHoldings,
JESCO
JESCO Holdings,Inc.:
Holdings, Inc.:Electricity,
Inc.: Electricity, Communication.... 81
Electricity,Communication
Communication .... 81 Islamic Republic
Islamic Republic
Republic of
ofAfghanistan
Afghanistan
TamadaCorporation:
Tamada
Tamada Corporation:Plant
Corporation: Plant
Plant ........................................79
........................................
........................................ 79
79 Taiwan
Taiwan
Taiwan Ogushi Drilling
Ogushi Drilling
Drilling Co.,
Co., Ltd.:
103
JESCOHoldings,
JESCO
JESCO Holdings,Inc.:
Holdings, Inc.:Electricity,
Inc.: Electricity, Communication....
Electricity,Communication
Communication ....81
.... 81
81 AkrosTrading
Akros
Akros TradingCo.,
Trading Co.,Ltd.:
Co., Ltd.:Road
Ltd.: Road ...................................15
Road...................................
................................... 15 Republic
Republic of
Republic of Uzbekistan
of Uzbekistan
Uzbekistan
KyowakidenIndustry
Kyowakiden
Kyowakiden IndustryCo.,
Industry Co.,Ltd.:
Co., Ltd.:Water
Ltd.: Water Environment...
WaterEnvironment
Environment ......91
91
91 KidohConstruction
Kidoh
Kidoh ConstructionCo.,
Construction Co.,Ltd.:
Co., Ltd.:Tunnel
Ltd.: Tunnel .........................27
Tunnel.........................
......................... 27 Ogushi Drilling
Ogushi Drilling
Drilling Co.,
Co., Ltd.:
103
SugawaraSetsubi
Sugawara
Sugawara SetsubiInc.:
Setsubi Inc.:Water
Inc.: WaterEnvironment
Water Environment
Environment ..............
..............
..............99 99
99 NihonBase
Nihon
Nihon BaseCo.,
Base Co.,Ltd.:
Co., Ltd.:Piling
Ltd.: Piling ......................................57
Piling......................................
...................................... 57 Republic
Republic of
Republic of Kazakhstan
of Kazakhstan
Kazakhstan
NikkenLease
Nikken
Nikken LeaseKogyo
Lease KogyoCo.,
Kogyo Co.,Ltd.:
Co., Ltd.:Equipment,
Ltd.: Equipment,Product
Equipment, Product ......117
Product... 117
117 Kingdomof
Kingdom
Kingdom ofCambodia
of Cambodia
Cambodia Tokyo Rope
Tokyo Rope Mfg.
Mfg. Co.,
Rope Mfg. Co., Ltd.: Slope..............................
Ltd.: Slope ..............................71
71
MatsuzawaKawaraten
Matsuzawa
Matsuzawa KawaratenInc.:
Kawaraten Inc.:Equipment,
Inc.: Equipment,Product
Equipment, Product
Product ....119
....
.... 119
119 SaitagumiCo.,
Saitagumi
Saitagumi Co.,Ltd.:
Co., Ltd.:General
Ltd.: Construction..................
GeneralConstruction
General Construction ..................11 Kyrgyz Republic
Kyrgyz Republic
Republic
Archi-CubeInc.:
Archi-Cube
Archi-Cube Inc.:Design
Inc.: Design ..........................................125
Design..........................................
.......................................... 125
125 TenoxKyusyu
Tenox
Tenox KyusyuCorporation:
Kyusyu Corporation:Ground
Corporation: Ground Improvement....
GroundImprovement
Improvement ....39
.... 39
39 Tokyo
Tokyo Rope
Tokyo Rope Mfg.
Rope Mfg. Co.,
Mfg. Co., Ltd.:
Co., Ltd.: Slope
Ltd.: Slope ..............................
Slope..............................
..............................71
71
71
Republicof
Republic
Republic ofofthe
theUnion
the Unionof
Union ofofMyanmar
Myanmar
Myanmar India
India
India Russian Federation
Russian Federation
Russian Federation
KochiMarutaka
Kochi
Kochi MarutakaCo.,
Marutaka Co.,Ltd.
Co., Ltd.(candidate):
Ltd. (candidate):Bridge
(candidate): Bridge ...........17
Bridge...........
........... 17
17 AkrosTrading
Akros
Akros TradingCo.,
Trading Co.,Ltd.:
Co., Ltd.:Road
Ltd.: Road ...................................15
Road...................................
................................... 15
15 Tokyo
Tokyo Rope
Tokyo Rope Mfg.
Rope Mfg. Co.,
Mfg. Co., Ltd.:
Co., Ltd.: Slope ..............................
..............................71
Slope..............................
Ltd.: Slope 71
71
OnodaChemico
Onoda
Onoda ChemicoCo.,
Chemico Co.,Ltd.:
Co., Ltd.:Ground
Ltd.: GroundImprovement
Ground Improvement......
Improvement ......37
...... 37
37 FederalDemocratic
Federal
Federal DemocraticRepublic
Democratic Republicof
Republic ofNepal
of Nepal
Nepal United
United Kingdom
United Kingdom
Kingdom ofof Great
of Great Britain
Great Britain
Britain andand
and Northern
NorthernIreland
Northern Ireland
Ireland
TenoxKyusyu
Tenox
Tenox KyusyuCorporation:
Kyusyu Corporation:Ground
Corporation: GroundImprovement
Ground Improvement....
Improvement ....39
.... 39
39 NissakuCo.,
Nissaku
Nissaku Co.,Ltd.:
Co., Ltd.:Water
Ltd.: WaterEnvironment
Water Environment ......................93
Environment......................
...................... 93
93 ITO
ITO Corporation:
ITO Corporation: Plant ...............................................
...............................................77
Plant...............................................
Corporation: Plant 77
77
ITOCorporation:
Corporation:Plant
Plant ...............................................
...............................................
...............................................77 77 DemocraticSocialist
SocialistRepublic
Republicof ofSri
SriLanka
Lanka
ITO
ITO Corporation: Plant 77 Democratic
Democratic Socialist Republic of Sri Lanka
SugawaraSetsubi
SetsubiInc.:
Inc.:Water
WaterEnvironment
Environment .............. 99
..............
.............. AbeNikko
NikkoKogyo
KogyoCo.,
Co.,Ltd.:
Ltd.:Water
WaterEnvironment ........ 97
Environment........
........
Sugawara
Sugawara Setsubi Inc.: Water Environment 99
99 Abe
Abe Nikko Kogyo Co., Ltd.: Water Environment 97
97
Nikken Lease Kogyo Co., Ltd.: Equipment, Product ... 117
Nikken
Nikken Lease
Lease Kogyo
Kogyo Co.,
Co., Ltd.:
Ltd.: Equipment, Product...
Equipment, Product ...117
117
131
131
131 132
132
132
Collection of Construction Technologies
－The World-Class Technologies of Japanese Small and Medium-sized Construction Companies－
Published July 2021
International Markets Division, Real Estate and Construction Economy Bureau,

Ministry of Land, Infrastructure, Transport and Tourism
Government of Japan
2-1-3 Kasumigaseki, Chiyoda-ku,
Tokyo, Japan 100-8918
TEL: 03-5253-8280
JASMOC
Japan Association of Small and Medium-sized enterprises for Overseas Construction
July

Jasmoc Jasmoc

Uploaded by

Copyright:

Available Formats

Jasmoc Jasmoc

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Jasmoc Jasmoc

Uploaded by

Copyright:

Available Formats

⅐ⅽⅺⅺⅳⅱↂⅷⅽⅼ ⅽⅴ ⅐ⅽⅼↁↂↀↃⅱↂⅷⅽⅼ Ⅱⅳⅱⅶⅼⅽⅺⅽⅵⅷⅳↁ

=ⅡⅶⅳℭⅤⅽↀⅺⅲ℺⅐ⅺⅯↁↁ Ⅱⅳⅱⅶⅼⅽⅺⅽⅵⅷⅳↁ ⅽⅴ ⅗ⅯⅾⅯⅼⅳↁⅳ ⅠⅻⅯⅺⅺ Ⅿⅼⅲ ⅚ⅳⅲⅷↃⅻ℺ↁⅷↈⅳⅲ ⅐ⅽⅼↁↂↀↃⅱↂⅷⅽⅼ ⅐ⅽⅻⅾⅯⅼⅷⅳↁ=

1. General Construction 9. Plant

We offer construction with resident management by a Japanese engineer

[VIETNAM] Experienced Japanese engineer resides locally and performs

Work System Conditions for Using Technology

Achievements in Japan and Overseas and construction companies.

Experiment: Field Test, Simulation Technical Overview

Address 862-1 Yamadabashi, Ichihara, Chiba 290-0021, Japan

Overseas Branches Vietnam (Hanoi) (under consideration) Pressure

Possible Implementation Areas Vietnam (under consideration) soil

Supported Languages English (e-mail only), Vietnamese Auger elevation

Reaction force Reaction force

[Merits of Adopting Technology]

Taiwan: Propulsion work (2 projects)

workers.  The plant yard must be approx. 30 m × 50 m = 1,500 m2.

Address 2-904-16 Hayama, Kudamatsu, Yamaguchi, 744-0061, Japan

Ha 61-1 Muryojimachi, Kanazawa, Ishikawa 920-0332, Japan

Supported Languages English, French, Tamil (India) Alarm system

Purification unit (5 m3/D) Solar power and Batteries Remote monitoring

Achievements in Japan and Overseas

Achievements in Japan and Overseas 2. Simplification of work

Address 3-21-2 Motoderacho, Tsushimashi, Aichi, 496-0034, Japan

Conditions for Using Technology

Address 9-19-1 Itazawa, Kamigo-cho, Tono-shi, Iwate, Japan

Address 464-2 Horikawamachi, Toyama-shi, Toyama, Japan

manufacturers and contractors in ASEAN countries.

Published July 2021

International Markets Division, Real Estate and Construction Economy Bureau,

You might also like