CROWN RD5700 - Spec - GB
CROWN RD5700 - Spec - GB
CROWN RD5700 - Spec - GB
RD 5700 Series
Reach Trucks
RD 5700
Series
C RD 5700 Series Reach Trucks
100 100
4.33/4.34
4.35
100
4.21
825
1040 on RD 5725
1180 on RD 5795S
203
4.4
4.5
4.7 788
25 155 25 155
4.2
2 Ø 102x74
2 Ø 102x104
50 205 50 205
4.71
2 Ø 152x74
2 Ø 152x104
133
4.72 180*** 50** 182 50** 182
2 Ø 127x104
264 RD 5725 2 Ø 127x74
315 RD 5795S
1.9 1.9
4.37
* top tie bar width – 840 for 6095 or 6855 lift height, 890 for 7620 and above
** 25 on lift heights above 8150
*** Height reduces from 180 mm with tyre wear
RD 5700 Series Specifications
Table 1
Type RD 5725-1.35 / RD 5795S-1.35
4.2 Mast collapsed height mm 2260 2415 2720 3025 3330
4.3 Free Lift w. standard 915 mm load backrest mm 1345 1495 1800 2105 2410
4.4 Lift Height mm 5025 5330 6095 6855 7620
4.5 Mast extended height w. load backrest mm 5945 6250 7010 7775 8535
4.7 Height overhead guard mm 2260 2415 2415 2415 2415
Minimum Straddle OD width across outriggers mm 1070
2.1 Truck Weight less battery compartment size
C kg 2720 2770 2915 3045 3275
RD 5725-1.35 D kg 2740 2790 2935 3065 3295
E kg 2765 2815 2960 3090 3320
C kg 2875 2925 3065 3195 3425
RD 5795S-1.35 D kg 2895 2945 3090 3220 3450
E kg 2920 2970 3115 3245 3475
Table 2
RD 5725-1.35 RD 5795S-1.35
Compartment C D E C D E
1.9 Wheel base y 1557 1602 1668 1557 1602 1668/1789
4.20 • Headlength l2 1474 1519 1585 1525 1569 1636/1757
4.33 • 1200 x 1000 deep Ast 2911 2956 3021 2955 2998 3062/3189
4.33 • 1000 x 1200 deep Ast 3013 3058 3123 3057 3100 3164/3291
4.34 • 800 x 1200 deep Ast 2967 3012 3077 3011 3054 3118/3245
4.35 Turning Radius Wa 1825 1870 1935 1869 1912 1976/2103
4.37 Overall Length L7 1976 2021 2087 2027 2071 2185/2259
6.3 Max. Battery Box lxwxh 412x974x785 457x982x785 525x982x785 412x974x785 457x982x785 525x982x785
6.4 Battery max. Ah 750 800 900 750 900 1000
6.5 Battery min. kg 908 1035 1180 908 1035 1180/1270
Capacity 10. High visibility power unit 5. Drive-in rack mast Five-point positioning provides
Model RD 5725-1.35: 1350 kg 11. High visibility mast (RD 5725 only) control and stability, starting with
at 600 mm load center 36 volt 6. Drive-in rack third post the right hand on the multi-task
12. Overhead guard
controller and the left hand on
Model RD 5795S-1.35: 1350 kg 13. 915 mm high load backrest 7. Chain slack kit
the steer tiller. Left foot on the
at 600 mm load center 36 volt 8. Removable outrigger tips
14. Tilting fork carriage brake pedal and the right foot on
15. Tandem articulating load 9. Mesh screen mast guard the presence sensor. The
Batteries wheels 10. Battery retainer with interlock operator’s back is naturally fitted
Battery removal from left or right 16. Lift slow down 300 mm 11. 5th battery compartment against the wrap-around
side of truck. Standard battery from maximum lift height roller support cushion.
compartment rollers for extraction An entry bar with sensors to
17. Lift Limit without override 12. 1065 mm and 1220 mm
with mechanised equipment. automatically slow truck travel,
18. Crown-manufactured AC high load backrests
encourages safe foot positioning
drive and lift motors 13. Crown-manufactured
Standard Equipment inside the truck.
19. Offset articulated drive axle sideshifter, 50 mm each way
1. Crown’s Access 1 2 3™ The multi-task control enables
with 190º steer arc 14. Overhead guard mesh
Comprehensive System the operator to manoeuvre the
20. Key switch 15. Fork lengths truck while blending lift and
Control
21. Horn 16. Work lights accessory functions for improved
2. 36 volt system
22. Emergency power 17. Corrosion/freezer productivity. Control handle
3. AC Traction System activation forces are reduced.
disconnect conditioning (freezer
4. OnTrac™ Anti-Slip Traction conditioning includes a 16 The soft grip steer tiller with
23. SBE 320 amp grey battery
Control mm thick power unit skirt electronic power steering
connector
5. AC Hydraulic System with extended coverage of reduces operator fatigue.
24. Large diameter battery
6. Electronic power steering the drive and caster tyres) Operator visibility is improved
rollers
18. Load wheel sizes and with:
7. Operator Compartment 25. Colour-coded wiring
compounds • Low profile power unit
• Variable side stance 26. Third post
19. Work Assist™ Accessories: • High visibility mast
• Flexible five-point 27. InfoPoint® component
positioning • Accessory tube • Angled mast cross bracing
identification system
• Back support with integral • Accessory RF mounting • Angled overhead guard
hip support plate cross bars
Model Specific Standard
• Arm/elbow support • Accessory RF mounting • Variable side stance
Equipment
padding bracket Superior thermal management is
RD 5725
• Padded compartment • Accessory clamp the result of several design
1. Battery removal from left features: reduced heat generating
interior walls • Accessory clip pad
or right side of truck components, positioning of heat
• Operator console with • Accessory hook
2. 1740 cm2 suspended generating components away
work surface and storage • Accessory clip pad and
floorboard area from the compartment, padding
• Suspended floor hook to insulate the compartment
RD 5795S
• Entry bar • Accessory pocket from heat, and improved air
1. Battery removal from left
• Premium urethane side of truck paths through the truck.
floorboard cushion Operator Compartment Clipboard surface and console
2. 2470 cm2 suspended
• Console light floorboard area and 1150 Soft, rounded surfaces make storage pockets are standard.
8. Multi-task control handle cm2 upper footrest area compartment interior more Additional S-Class specific
9. Crown display 3. Adjustable suspended seat, comfortable. Streamlined operator compartment features:
lean seat, backrest, and exterior smooths entry/exit for All S Class double deep reach
• Event code display with
multi-task control armrest the operator. A low walk-in floor trucks include an upper footrest
five (5) key navigation.
height, speeds up entry and exit. area, with smart foot presence
• Hour meters / travel 4. Adjustable steer tiller
A patented suspended pedal and brake control. Using
distance / stop watch floorboard provides comfortable these large, exclusive footrests
• PIN Code access capable Optional Equipment footing. can improve operator comfort.
• Access 1 2 3 diagnostics 1. Rack Height Select and Tilt The brake pedal design allows From the standing position, the
• P1, P2, P3 performance Position Assist variable side-stance positions for ability to lift either leg to a
tuning 2. Capacity monitor the operator. The operator can footrest can reduce fatigue
change positions to increase which increases productivity.
• Battery discharge 3. Camera and colour monitor
indicator, steer wheel comfort and productivity.
4. Lift limit with override
direction indicator, OnTrac
Traction Control indicator
RD 5700 Series Technical Information
The S Class model offers a Travel Regenerative motor braking Rolled steel outer channel masts
superior level of flexibility for the Crown’s AC traction system is a helps save energy, and and inner “I” beams roll on
operator with an adjustable closed loop traction control decreases motor temperature. canted, steel, anti-friction roller
suspended seat, lean seat, system that maintains top speed An additional electronically- bearings for minimal current
backrest, armrest, control throughout the battery charge. applied brake on both castor draw and long life. Telescoping
handle and steer tiller. The Access 1 2 3 supplies the wheels work with the motor brake mast sections are staggered to
combination of these features operator with a "fresh from the to provide excellent brake per- reduce truck length. Heavier
lets the operator move from a charger" feeling throughout the formance for the S Class truck. mast cross bracing design
standing, leaning or seated whole battery charge cycle. increases stiffness. Above
driver position. By changing Engineered and manufactured 6860 mm lift height, vertical
postures and using different sets Load Handling mast reinforcement maintains
by Crown, the AC motor,
of muscles, significant controller and drive unit are The optional load handling assist maximum capacity.
ergonomic, physiological and designed specifically for lift truck package provides rack height
orthopedic benefits may result. applications. select and tilt position assist
Reach Mechanism
Crown’s Access 1 2 3™ features.
On a slope or when interfacing Inner arm has a one piece plate
Comprehensive System Control with push-back racking, the The Rack Height Select feature
with continuous welding. Torque
provides optimum performance “truck hold” feature electronically allows the forks to be pro-
plate is also used to give the
and control by offering a commu- brakes the truck when the grammed to stop at preselected
mechanism stiffness to resist
nication interface for operators handle is in neutral. heights. With one-touch of the
twisting for long-lasting dura-
and technicians, intelligent multi-task trigger while lifting or
Selected travel speed remains bility. Outer arms are designed
coordination of lift truck systems lowering, the mast will stop at
constant regardless of surfaces, with large heel to provide more
and simplified service with the next programmed height.
load weight or grades. Less material for stresses to be
advanced diagnostics. Another useful option is the Tilt
throttling of control handle distributed evenly. Robotically
The Crown display is used for means better truck control and Position Assist. This allows the
welded for maximum strength.
easy trouble shooting, accessing less fatigue to the operator. fork tilt to stop at a horizontal
service history and setting position for maximum fork
performance features. There is clearance when entering pallets. Carriage
no laptop with specific software Steering
Also optional, the Capacity A hook-type carriage conforming
or service handset required for The electronic power steering Monitor shows the approximate to ITA / FEM / ISO Class 2A
troubleshooting or parameter uses an AC steer motor and weight on the forks and the fork specifications is used. Load
adjustments. A distribution panel steering control module height. It will alert the operator backrest is standard.
is conveniently located with all integrated with the Access 1 2 3 when the truck capacity is
test points, control fuses and System to provide fast, reliable exceeded for the fork height. It
steering response. Smooth, Safety Regulations
central wiring for easy will also show how high or to
troubleshooting. quiet and responsive steering which lift zone you can raise the Conforms to European safety
control with minimal operator load. standards.
Three modes of performance
can be selected to accommo- effort. Steer tyre rotates 190° for Dimensions and performance
date operator experience or maximum manoeuvrability. data given may vary due to
Mast
application requirements. manufacturing tolerances.
High visibility mast design with Performance is based upon an
Braking
angled cross bracing and angled average size vehicle and is
OnTrac™ Anti-Slip A disc brake on the motor overhead guard braces improve affected by weight, condition of
Traction Control armature shaft combined with visibility for high or low stacking. truck, how it is equipped and the
Crown’s Access 1 2 3 motor regenerative braking
Crown’s patented staging conditions of the operating area.
technology monitors truck provides sure braking with
cushions coupled with lowering Crown products and
dynamics, optimises traction, fewer parts and maintenance
dampers and speed reductions specifications are subject to
reduces spinning during requirements. The offset,
at maximum lift improve overall change without notice.
acceleration, prevents lock-up articulated drive-unit design
load handling control.
during braking, and greatly improves drive tyre brake force.
extends tyre life.
C
European Manufacturing:
Crown Gabelstapler GmbH & Co. KG
RD 5700 SPEC GB 06/09, 10
DIN EN ISO 9002
Roding, Germany
M03455-006-00
Printed in Germany www.crown.com