6-Axis Mach3 Controller
with Enternet Interface
Manual
contect
Chapter 1 Introduction .............................................................................................................................................. 1
1.1. Product Introduction ............................................................................................................................ 1
1.2. Products specification .......................................................................................................................... 1
1.3. Products Appearance an d struction and size ....................................................................................... 2
1.4. substantival explanation ....................................................................................................................... 3
1.5. Noting and Waring ............................................................................................................................... 5
Chapter 2 Connection ............................................................................................................................................... 6
2.1. Device Power supply Solution ............................................................................................................. 6
2.2. Product connection define and method ................................................................................................ 7
Chapter 3 Software Installation .............................................................................................................................. 21
3.1. MACH3 Install .................................................................................................................................. 21
3.2. MACH3Registration .......................................................................................................................... 24
3.3. NVEM Plug-in installation ................................................................................................................ 24
Chapter 4 Using of software ................................................................................................................................... 25
Chapter 1 Introduction
1.1. Product Introduction
Novusun CNC has engaged in the Numerical control industry for 7 years,specialized in
the research,development and production of various CNC controller systems with high quality
and high reliability.We produce the Brushless DC motor,Stepper motor driver,and also 1 to 6 aixs
CNC motion controllers.。
NVEMv1.1 is the 3-6 axis motion controller we spend 4 years to design.
NVEMv1.1 support Mach3 software and standard MPG,through Ethernet to
communicate with computer,just use the Twine to connect directly or transfer with router.
NVEMv1.1 motion controller adopts the ARM design framework.The ARM design
includes communication,codeanalytic,underlying algorithm and pulse gerneration. Rational
design,reliablecontrol,convenient operation.
This manual introduces operation,connection and usage schedule of our professional
motion controller for engraving machine.Through a lot of the drawing the users can learn
quickly how to use this motion controller.
1.2. Products specification
S 12 ports photoelectric isolated input interface for ordinary digital data；
S 10 ports photoelectric isolated output interface for ordinary digital data；
S 1 port 0-10V spindle speed analog output interface(can change to PWM output)；
S can support 3-6 axis stepper systems,200KHz pulse output for every axis；
S ARM motion control chip；
S main device is 12V-32VDC power supply input,current should higher than 0.5A；
S Compatible with MPG input,support the digital display MPG from our company。
1.3. Products Appearance an d struction and size
■NVEMv1.1 motion controller is with the sealed shell structure,there are 4pcs setting
holes at the bottom.We can fix 4pcs 4mm diameter holes at the cabinet,and install the controller
into the cabinet.The controller appearance as the Figure 1-1 and Figure 1-2 show:
The products overall size is 163.1mm*80.8mm*27.8mm；
The bottom install size is 101.4mm*42.5mm。
Figure 1-1. NVEMV1.1 front appearance and size
Figure 1-2. The other side of NVEMV1.1and installation dimensions
1.4. substantival explanation
When operate the NVEM,where will be a lot of English abbreviation,now we list all of
them for your kindly references:
FRO:Feedingadjust:During the operating process,the F value already set,and need to
adjust the current feeding speed, then we can adjust FRO value to realize it.
SRO: Spindle speed adjust: During the operating process, the S value already set, and need
to adjust the current spindle speed, then we can adjust SRO value to realize it :
Current Speed S#=setting S*SRO.
SRJ:speed adjust manually
During the operating process,as the manual speed already set,and we need to adjust the
current speed,and impossible to fix the value during it is working,then we can revise the SRJ
value to realize it.
Current manual speed FS#=Setting manual speed*SRJ.
F:Feedingspeed,the unit is mm/min.For example F=200,means every minute feeding
2000mm.
S: Spindle Speed. Unit is rad/min.For example S=20000,means 20000 revolution/Minute.
X axis Coordinate
Y axis Coordinate
Z axis Coordinate
A axis Coordinate
B axis Coordinate
C axis Coordinate
Ready:ReadyMode.In the mode we can do any operation,include processing or values
modification or starting 2nd mode.
Reset: Reset mode.In this mode,it should stop every operation.
“Step”:Manual Step Mode. Every axis candonduct the manual step operation at this mode.
MPG: MPG mode.Every axis can conduct the MPG operation at this mode.
2.2. Product connection define and method
