HDD & DVD P / R D T: Owner's Manual

Introduction
Owner's Manual
Connections
H2080MW8
HDD & DVD PLAYER / RECORDER
WITH DIGITAL TUNER
Basic Setup
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
Recording
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Playback
Editing
Function Setup
Others
Español
© 2007 Funai Electric Co., Ltd.
E2H00UD.indd 1 2007/05/11 10:15:02

PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
CAUTION equilateral triangle, is intended to alert the user to the
RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage” within the
DO NOT OPEN product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT The exclamation point within an equilateral triangle is
REMOVE COVER (OR BACK). NO USER SERVICEABLE intended to alert the user to the presence of important
PARTS INSIDE. REFER SERVICING TO QUALIFIED operating and maintenance (servicing) instructions in the
SERVICE PERSONNEL. literature accompanying the appliance.
The caution marking is located on the rear of the cabinet.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device,
due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the manual. The
user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations
concerning chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain
this information for future reference.
Model No. _____________________
Serial No. _____________________
2 EN
E2H00UD.indd 2 2007/05/11 10:15:04

PRECAUTIONS
Introduction
Important Safeguards
1. Read Instructions - All the safety and operating instructions information with regard to proper grounding of the mast and
should be read before the appliance is operated. supporting structure, grounding of the lead-in wire to an
2. Retain Instructions- The safety and operating instructions antenna discharge unit, size of grounding conductors, location
should be retained for future reference. of antenna-discharge unit, connection to grounding
3. Heed Warnings - All warnings on the appliance and in the electrodes, and requirements for the grounding electrode. (Fig.
operating instructions should be adhered to. A)
Connections
4. Follow Instructions - All operating and use instructions should FIGURE A
be followed. ANTENNA
EXAMPLE OF ANTENNA GROUNDING LEAD
5. Cleaning - Unplug this product from the wall outlet before AS PER NATIONAL ELECTRICAL CODE WIRE
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning. GROUND
CLAMP
EXCEPTION: A product that is meant for uninterrupted service ANTENNA
DISCHARGE UNIT
and, that for some specific reason, such as the possibility of the (NEC SECTION 810-20)
loss of an authorization code for a CATV converter, is not ELECTRIC
SERVICE
Basic Setup
intended to be unplugged by the user for cleaning or any EQUIPMENT GROUNDING CONDUCTORS
(NEC SECTION 810-21)
other purpose, may exclude the reference to unplugging the GROUND CLAMP
appliance in the cleaning description otherwise required in NEC – NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING
S2898A ELECTRODE SYSTEM
item 5. (NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards. 14. Lightning - For added protection for this product during a
7. Water and Moisture- Do not use this product near water, for lightning storm, or when it is left unattended and unused for
example, near a bath tub, wash bowl, kitchen sink, or laundry long periods of time, unplug it from the wall outlet and
tub, in a wet basement, or near a swimming pool, and the like. disconnect the antenna or cable system. This will prevent
Recording
8. Accessories - Do not place this product on an unstable cart, damage to the product due to lightning and power-line surges.
stand, tripod, bracket, or table. The product may fall, causing 15. Power Lines - An outside antenna system should not be located
serious injury to a child or adult, and serious damage to the in the vicinity of overhead power lines or other electric light or
appliance. Use only with a cart, stand, tripod, bracket, or table power circuits, or where it can fall into such power lines or
recommended by the manufacturer, or circuits. When installing an outside antenna system, extreme
sold with the product. Any mounting of care should be taken to keep from touching such power lines
the appliance should follow the or circuits as contact with them might be fatal.
manufacturer’s instructions and should 16. Overloading - Do not overload wall outlets and extension cords
use a mounting accessory recommended as this can result in a risk of fire or electric shock.
Playback
by the manufacturer. An appliance and 17. Object and Liquid Entry - Never push objects of any kind into
cart combination should be moved with this product through any openings as they may touch
care. Quick stops, excessive force, and dangerous voltage points or short-out parts that could result in
uneven surfaces may cause the appliance and cart a fire or electric shock. Never spill liquid of any kind on the
combination to overturn. product.
9. Ventilation - Slots and openings in the cabinet are provided for 18. Servicing - Do not attempt to service this product yourself as
ventilation and to ensure reliable operation of the product and opening or removing covers may expose you to dangerous
to protect it from overheating, and these openings must not voltage or other hazards. Refer all servicing to qualified service
be blocked or covered. The openings should never be blocked personnel.
Editing
by placing the product on a bed, sofa, rug, or other similar 19. Damage Requiring Service - Unplug this product from the wall
surface. This product should not be placed in a built-in outlet and refer servicing to qualified service personnel under
installation such as a bookcase or rack unless proper the following conditions:
ventilation is provided or the manufacturer’s instructions have a. When the power-supply cord or plug is damaged.
been adhered to. b. If liquid has been spilled, or objects have fallen into the
10. Power Sources - This product should be operated only from the product.
Function Setup
type of power source indicated on the marking label. If you are c. If the product has been exposed to rain or water.
not sure of the type of power supply to your home, consult d. If the product does not operate normally by following the
your appliance dealer or local power company. For products operating instructions. Adjust only those controls that are
intended to operate from battery power, or other sources, refer covered by the operating instructions as an improper
to the operating instructions. adjustment of other controls may result in damage and will
11. Grounding or Polarization - This product is equipped with a often require extensive work by a qualified technician to
polarized alternating-current line plug (a plug having one restore the product to its normal operation.
blade wider than the other). This plug will fit into the power e. If the product has been dropped or damaged in any way.
outlet only one way. This is a safety feature. If you are unable to f. When the product exhibits a distinct change in performance
insert the plug fully into the outlet, try reversing the plug. If the this indicates a need for service.
plug should still fail to fit, contact your electrician to replace 20. Replacement Parts - When replacement parts are required, be
Others
your obsolete outlet. Do not defeat the safety purpose of the sure the service technician has used replacement parts
polarized plug. specified by the manufacturer or have the same characteristics
12. Power Cord Protection - Power supply cords should be routed as the original part. Unauthorized substitutions may result in
so that they are not likely to be walked on or pinched by items fire, electric shock or other hazards.
placed upon or against them, paying particular attention to 21. Safety Check - Upon completion of any service or repairs to this
cords at plugs, convenience receptacles, and the point where product, ask the service technician to perform safety checks to
they exit from the appliance. determine that the product is in proper operating condition.
13. Outdoor Antenna Grounding - If an outside antenna or cable 22. Heat - This product should be situated away from heat sources
Español
system is connected to the product, be sure the antenna or such as radiators, heat registers, stoves, or other products
cable system is grounded so as to provide some protection (including amplifiers) that produce heat.
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA No. 70, provides
EN 3
E2H00UD.indd 3 2007/05/11 10:15:04

PRECAUTIONS
Installation Location Supplied Accessories
For safety and optimum performance of this unit: remote control (NB504UD) with batteries (AAAx2)
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields. RF coaxial cable (WPZ0901TM002)
Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our RCA audio/video cables (WPZ0102TM015/WPZ0102LTE01)
Authorized Service Center for servicing.
Moisture Condensation Warning

Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place or
after heating a cold room or under conditions of high
humidity. Do not use this unit at least for 2 hours until its
inside gets dry. owner's manual (1VMN23645)
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by quick guide (1VMN23646)
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
Notice for Progressive Scan Output

Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of picture problems with 525 (480) progressive
scan output, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding your TV set compatibility with
this 525p (480p) DVD player, please contact our customer
service center.
4 EN
E2H00UD.indd 4 2007/05/11 10:15:05

PRECAUTIONS
Introduction
Maintenance
Servicing IR signal check
• Please refer to relevant topics on “TROUBLESHOOTING” If the remote control does not work properly, you can test
on pages 105-108 before returning the product. if the remote control sends out the infrared signal with
• If this unit becomes inoperative, do not try to correct AM radio or a digital camera (including built-in camera
the problem by yourself. There are no user-serviceable of cellular phone). It will help to define the cause of
parts inside. Turn off, unplug the power plug and malfunction.
Connections
please call our help line mentioned on the front page • With an AM radio:
to locate an Authorized Service Center. Tune an AM radio to a station with no
Cleaning the cabinet broadcasting. Press a button on remote
• Use a soft cloth slightly moistened with a mild control toward the radio. Sound will be
detergent solution. Do not use a solution containing fluttering when you press any key and the
alcohol, spirits, ammonia or abrasive. radio receives the signal. This means the
remote control is working.
Cleaning discs
Basic Setup
• With a digital camera (including built-in
• When a disc becomes dirty, clean it with a cleaning
camera of cellular phone):
cloth. Wipe the disc from the center to out. Do not
Direct a digital camera to remote control,
wipe in a circular motion.
press and hold a button on remote control.
• Do not use solvents such as benzine, thinner,
If infrared light appears through digital
commercially available cleaners, detergent, abrasive
camera, the remote control is working.
cleaning agents or antistatic spray intended for analog
records.
Recording
Cleaning the disc lens
• If this unit still does not perform properly “Kodak Picture CD COMPATIBLE” is a trademark of
although you refer to the relevant sections and to Eastman Kodak Company.
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer Manufactured under license from
or an Authorized Service Center for inspection and Dolby Laboratories. “Dolby” and the
cleaning of the laser optical pickup unit. double-D symbol are trademarks of
Disc handling Dolby Laboratories.
Playback
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs. Dolby Digital Recording
• Always store the disc in its protective case when it is “Dolby® Digital Recording enables consumers to record
not used. high-quality video with stereo sound on recordable DVD
HDD handling discs. The technology, when utilized instead of PCM
• HDD is a precision apparatus that is susceptible recording, also saves recordable disc space, allowing for
to vibration, strong impact or dirt. Depending on higher video resolution or extended recording time on
Editing
the installation environment or handling, the unit each DVD. DVDs created using Dolby Digital Recording
may become partially damaged or in the worst will play back on all DVD-video players.”
case, recording or replaying may not be available. Note: This is true when the players are compatible with
Especially while the HDD is in motion, do not subject actual recordable DVD discs.
it to vibration or strong impact or pull out the power
plug. And if a power failure occurs, the content of the
Function Setup
recording / replaying program may be lost.

• HDD rotates at high speed when in operation. Be sure
that rotation has stopped and then move the unit
without subjecting it to strong impact or vibration.
© 2007 Funai Electric Co., Ltd.

Others
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
Español
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN 5
E2H00UD.indd 5 2007/05/11 10:15:05

CONTENTS
Introduction Recording
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INFORMATION ON RECORDING . . . . . . . . . . . . . . . . . . 37
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .9 Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 39
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 BASIC RECORDING &
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 40
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 45
SPECIAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Connections Time Shift Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 15 Overwriting from the Beginning of the Title. . . . . . . . 47
RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 16 Overwriting in the Middle of the Title . . . . . . . . . . . . . . 47
CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 17 Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 19 Information on Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Settings for an External Device . . . . . . . . . . . . . . . . . . . . 50
Recording from an External Device . . . . . . . . . . . . . . . . 51
Basic Setup Selected Title Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 One Title Dubbing (HDD to DVD only) . . . . . . . . . . . . . 54
Finding the Viewing Channel on Your TV . . . . . . . . . . 20 PROTECTING A DISC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Guide to On-Screen Display / Menu. . . . . . . . . . . . . . . . 21 PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . 56
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Switching HDD / DVD Mode . . . . . . . . . . . . . . . . . . . . . . . 24 Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
How to Insert a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CHANNEL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 27
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Switching Analog Mode / Digital Mode . . . . . . . . . . . . 31
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6 EN
E2H00UD.indd 6 2007/05/11 10:15:06

CONTENTS
Introduction
Connections
Playback Editing
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 58 INFORMATION ON EDITING. . . . . . . . . . . . . . . . . . . . . . 74
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Edit Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 61 How to Access the Edit Menu. . . . . . . . . . . . . . . . . . . . . . 75
Playing Back an Audio CD and a CD-RW/-R EDITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
with MP3 / JPEG Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Deleting a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Basic Setup
Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 64 Deleting Selected Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Chapter Marks (Add) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Chapter Marks (Delete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 65 Chapter Marks (Delete All). . . . . . . . . . . . . . . . . . . . . . . . . 82
Variable Skip / Variable Replay. . . . . . . . . . . . . . . . . . . . . 65 Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Deleting a Scene of a Title . . . . . . . . . . . . . . . . . . . . . . . . . 84
Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Protecting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Recording
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 66 Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Time Shift Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Setting an Index Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Simultaneous Playback and Recording. . . . . . . . . . . . . 66 Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Deleting All Titles in HDD. . . . . . . . . . . . . . . . . . . . . . . . . . 92
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Function Setup
Playback
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 72 Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 72
Editing
Switching Virtual Surround System . . . . . . . . . . . . . . . . 73
Others
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 73 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . 107
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Function Setup
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover

Others
Español
EN 7
E2H00UD.indd 7 2007/05/11 10:15:06

FEATURES
This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on
HDD or DVD and edit them after that. The following features are offered with this unit.
Recording Playback
This unit allows you to record on the HDD, a DVD+RW/- HDD DVD
RW (rewritable) and a DVD+R/-R (one-time write). You can
Theater surround sound in your home:
choose any one for your convenience. Even if you choose
When connecting the unit to an amplifier or a decoder
DVD-RW/-R, these discs will automatically be recorded in
which is compatible with Dolby Digital, you can experi-
the DVD+VR mode.
ence the theater surround sound from discs with sur-
HDD DVD round sound system.
Up to 36 program recording: Quick search for what you want to watch:
You can program the unit to record up to 36 programs You can easily find the part you want to watch using the
within a one-month period. Daily or weekly program search functions. You can search for a desired point by
recordings are also available. title, chapter or time.
One-touch timer recording (OTR): Virtual surround system:
You can easily set a recording time as you prefer. Every You can enjoy stereophonic space through your existing
time [REC I] is pressed during recording, the recording 2 channel stereo system.
time will be increased by 30 minutes up to 6 hours. The
Variable skip:
recording automatically stops when the recording time
You can skip forward a certain time, which is specified in
you set is reached or the disc is full.
“Playback” menu in advance, with one-touch while play-
Automatic chapter mark setting: back.
Chapter marks will be put on recordings as you set before
Variable replay:
attempting to record.
You can skip back a certain time, which is specified in
Automatic title list making: “Playback” menu in advance, with one-touch while play-
The unit makes a title list with the index automatically. back.
HDD HDD
80 GB hard disc: Time shift playback:
This unit is equipped with a 80GB hard disc which allows You can play back a title being recorded from the begin-
you to record up to 90 hours (with SLP mode). ning while recording continues.
DVD
Time shift recording:
With [TIME SHIFT] button, you can virtually pause and Playing back MP3/JPEG/Kodak Picture CD files:
resume the live TV broadcast. You can enjoy MP3/JPEG/Kodak Picture CD files which are
recorded on CD-RW/-R.
DVD
Alternate recording:
If there is no recordable disc in the unit, if the disc does Editing
not have enough space to complete the recording, or if
the material is “copy-once” program and prohibited to be HDD DVD
recorded on a DVD, the unit will detect it and automatically Deleting a title:
record to the HDD even when DVD is selected as the record- You can delete a title which you do not need anymore.
ing media. Putting names on titles:
This feature is available only for timer recording. Not avail- You can put your favorite names on titles.
able for one-touch timer recording.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Dubbing Dividing titles:
You can divide a title into 2 or more.
With this unit, you can enjoy bi-directional dubbing
between HDD and DVD. HDD
Deleting a scene of a title:
HDD DVD You can delete a scene from a title as you like.
High speed dubbing (HDD ➔ DVD only):
This feature offers you the dubbing speed of 12 times the DVD
SLP mode dubbing at the maximum. Hiding chapters:
Just dubbing (HDD ➔ DVD only): To keep others from playing back some chapters without
When dubbing from HDD to DVD, if you set the recording permission, you can hide chapters.
mode to “Auto”, the recording mode will automatically be Setting an Index Pictures:
adjusted so the titles will fit nicely in the remaining space You can change pictures for an index.
of the disc. Putting name on disc:
You can put your favorite disc name.
8 EN
E2H00UD.indd 8 2007/05/11 10:15:06

FEATURES
Introduction
Compatibility Symbols Used in this Owner's Manual
Available for playing back discs on a regular DVD
player: To specify for which media type each function is, we put
Recorded discs can be played back on regular DVD the following symbols at the beginning of each item to
players, including computer DVD drives compatible operate.
with DVD-video playback. Although DVD+R are playable * DVD-RW/-R recorded in VR mode or non compatible
on other units without finalization in most cases, it recording format are not playable.
* DVD-RW recorded in the mode other than +VR is not
Connections
is recommended to finalize in order to stabilize the
performance. For DVD-RW/-R, you need to finalize the recordable on this unit unless you erase all contents in
recorded discs to play back on other DVD players. the disc (refer to page 90).
* DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Others
Symbol Description
HDD DVD
For Recording, Playing Back, and Editing
Basic Setup
Progressive scan system:
Unlike conventional interlace scanning, the progressive Description refers to HDD
scan system provides less flickering and images in higher
resolution than that of traditional television signals. Description refers to DVD+RW
Description refers to DVD+R

Description refers to DVD-RW
Recording
Description refers to DVD-R
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to video CD with PBC function
Playback
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
Description refers to CD-RW/-R with JPEG files,
including Kodak Picture CD files
Editing
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Function Setup
Others
Español
EN 9
E2H00UD.indd 9 2007/05/11 10:15:06

FUNCTIONAL OVERVIEW
Front Panel
1 2 3* 4 5 6 7 8* 9 10
14 13 12 11
(*) The unit can also be turned on by pressing these buttons.
1. STANDBY-ON y button 10. CHANNEL / buttons

Press to turn the unit on and off. Use to connect external device with a RCA audio
2. Disc tray cable.
Place a disc when opening the disc tray. 11. AUDIO input jacks (E2)
3. OPEN/CLOSE A button* Use to connect external device with a RCA audio
Press to open or close the disc tray. cable.
4. Display 12. VIDEO input jack (E2)
Refer to “Front Panel Display” on page 14. Use to connect external device with a RCA video
5. HDD button cable.
Press to select the HDD output mode. 13. S-VIDEO input jack (E2)
6. DVD button Use to connect the S-video output of external device
Press to select the DVD output mode. with an S-video cable.
7. STOP C button 14. Infrared sensor window
Press to stop playback or recording. Receive signals from your remote control so that you
8. PLAY B button* can control the unit from a distance.
Press to start or resume playback.
9. RECORD I button
Press once to start a recording. Press repeatedly to
start one-touch timer recording.
10 EN
E2H00UD.indd 10 2007/05/11 10:15:06

FUNCTIONAL OVERVIEW
Introduction
Rear Panel
1 2 3 4
VIDEO VIDEO Y
IN OUT
IN
PB/CB
L L
Connections
OUT
R IN R OUT
PR/CR COAXIAL
AUDIO IN COMPONENT DIGITAL AUDIO OUTPUT
ANTENNA (E1) S-VIDEO AUDIO OUT VIDEO OUT S-VIDEO PCM/BITSTREAM
11 10 9 8 7 6 5
1. ANTENNA IN jack 8. AUDIO OUT jacks
Basic Setup
Use to connect an antenna. Use to connect a TV monitor, AV receiver or other
2. VIDEO IN jack (E1) device with a RCA audio cable.
Use to connect external device with a RCA video 9. S-VIDEO IN jack (E1)
cable. Use to connect the S-video output of external device
3. VIDEO OUT jack with an S-video cable.
Use to connect a TV monitor, AV receiver or other 10. AUDIO IN jacks (E1)
device with a RCA video cable. Use to connect external device with a RCA audio
4. AC Power Cord cable.
Recording
Connect to a standard AC outlet to supply power to 11. ANTENNA OUT jack
this unit. Use to connect an RF coaxial cable to pass the signal
5. DIGITAL AUDIO OUTPUT (COAXIAL) jack from the ANTENNA IN to your TV.
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
6. S-VIDEO OUT jack Note
Use to connect the S-video input of a TV monitor, AV • Do not touch the inner pins of the jacks on the rear
Playback
receiver or other device with an S-video cable. panel. Electrostatic discharge may cause permanent
7. COMPONENT VIDEO OUTPUT jacks damage to the unit.
Use to connect a TV monitor with component video
• This unit does not have the RF modulator.
inputs with a component video cable.
Editing
Function Setup
Others
Español
EN 11
E2H00UD.indd 11 2007/05/11 10:15:08

FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control Using a Remote Control

Install the batteries (AAAx2) matching the polarity Keep in mind the following when using the remote
indicated inside battery compartment of the remote control:
control. • Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
1
Open the cover.
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
2
Insert batteries. approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
16feet (5m) 23feet (7m) 16feet (5m)

30˚ 30˚
STANDBY-ON
Make sure to match + and - on the batteries to 1 18
the marks indicated in the battery compartment. 2 SOURCE DTV/TV DISPLAY OPEN/CLOSE
3 A 19*
3
Close the cover. .@/: ABC DEF
1 2 3
4 GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
SPACE CLEAR
.
5 0 20
6 DISC MENU SETUP
o 21
7
s OK B 22
TITLE RETURN
8 p 23
Note 24*
9 j B i
25
Incorrect use of batteries can result in hazards such as 10 26
leakage and bursting. Please observe the following: 11 F h g C
27
CHANNEL
• Do not mix new and old batteries together. 12 -- +
• Do not use different kinds of batteries together. 13 28
AUDIO HDD DVD TIMER
Although they may look similar, different batteries
may have different voltages. 14 29
• Make sure that the + and - ends of each battery 15 REC
I
REPEAT REC MODE D.DUBBING
30
match the indications in the battery compartment. 16 V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 31
• Remove batteries from battery compartment that is 17 32
not going to be used for a month or more. 33
34
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
12 EN
E2H00UD.indd 12 2007/05/11 10:15:08

FUNCTIONAL OVERVIEW
Introduction
(*) The unit can also be turned on by pressing these buttons.
1. DISPLAY button 20. CLEAR button

• Press to display the display menu on or off. • Press to clear the information once entered, to clear
2. DTV/TV button the marker settings, or to cancel the programming
• Press to switch between digital TV (DTV) mode and for CD, etc.
analog TV (TV) mode. 21. SETUP button
Connections
3. SOURCE button • Press to display the main menu.
• Press to select the appropriate input. • During playback, press and hold for more than 3
4. Number/Character buttons seconds to switch the progressive scanning mode
• Press to select channel numbers. to the interlace mode.
• Press to select a title/chapter/track/file on display. 22. Cursor K / L / { / B buttons
• Press to enter values for the settings in the main • Press to select items or settings.
menu. 23. RETURN button
Basic Setup
• Press to enter title names. • Press to return to the previously displayed menu
5. Confirm ( • ) button screen.
Analog mode: 24. PLAY B button*
• Press to confirm the channel selection made by • Press to start playback or resume playback.
[the Number buttons]. 25. NEXT G button
Digital mode: • During playback, press to skip to the next chapter,
• Press to confirm the major / minor channel track or file.
Recording
selection made by [the Number buttons]. • When playback is in pause, press repeatedly to for-
6. DISC MENU button ward the playback step by step.
• Press to display the disc menu. 26. FFW D button
7. OK button • During playback, press to fast forward the playback.
• Press to confirm or select menu items. • When playback is in pause, press to slow forward
8. TITLE button the playback.
• Press to display the title list. 27. STOP C button
Playback
9. PREV H button • Press to stop playback or recording.
• During playback, press to return to the beginning of • Press to exit from the title list.
the current chapter, track or file. 28. DVD button
• When playback is in pause, press repeatedly to • Press to select the DVD output mode.
reverse the playback step by step. 29. TIMER button
10. REW E button • Press to display the timer programming list.
• During playback, press to fast reverse the playback. 30. REC MODE button
• When playback is in pause, press to slow reverse • Press to switch the recording mode.
Editing
the playback. 31. D.DUBBING button
11. PAUSE F button • During playback, press to start dubbing right away.
• Press to pause playback or recording. • In stop mode, press to display “Dubbing” menu.
12. CHANNEL / buttons 32. TIME SHIFT button (HDD)
• Press to change the channel up and down. • Press twice to time shift recording you are watch-
Function Setup
13. HDD button ing. Press it again to continue watching it.
• Press to select the HDD output mode. 33. RAPID PLAY button
14. AUDIO button • During playback, press to play back in a slightly
• Press to switch the audio language for digital TV. faster/slower mode with keeping the audio quality.
• Press to display the audio menu during playback. 34. V.SKIP button
15. REPEAT button • Skips by the amount of time set in advance.
• Press to display the repeat menu.
16. REC I button
• Press once to start a recording.
Others
• Press repeatedly to start the one-touch timer

recording.
17. V. REPLAY button
• Replays by the amount of time set in advance.
18. STANDBY-ON y button
• Press to turn the unit on and off.
19. OPEN/CLOSE A button*
Español
• Press to open or close the disc tray.
EN 13
E2H00UD.indd 13 2007/05/11 10:15:10

FUNCTIONAL OVERVIEW
Front Panel Display
2 3
DTV BS CS DR CD
1 PM VCR 4
DB HDD
DVD
5
1. 4. Current status of the unit 5. Displays the following
PM : Appears in the afternoon

with the clock display.
: Appears when playback is
paused.
• Elapsed playback time
• Current title / chapter / track /
2. file number
: Appears when playing back
• Recording time / remaining time
a disc.
DTV : Appears when the channel • Clock
is in DTV mode. : Appears when the timer • Channel number
3. Title / track / file and chapter mark programming or OTR has
• Remaining time for one-touch
been set and is proceeding.
: Appears when indicating a timer recording
title / track / file number. : Appears during recording
process.
: Appears when indicating a : Flashes when a recording
chapter number. pauses.
: Appears when a disc is in
this unit.
DB : Appears during dubbing.
HDD : Appears when the unit is in

HDD mode.
DVD : Appears when the unit is in

DVD mode.
Display Message
Appears when the disc tray is Appears when data is being
opening. written on a disc.
Appears when the disc tray is Appears when the PBC function
closing. is activated. (Video CD playback
only. Refer to page 59.)
Appears when a disc is loaded

on the disc tray.
14 EN
E2H00UD.indd 14 2007/05/11 10:15:10

ANTENNA CABLE CONNECTION
Introduction
This section describes how to connect your unit to an antenna, cable box, etc.
1 Disconnect the power cord of your TV from the AC outlet.
2 Disconnect RF coaxial cable from antenna input jack of your TV.
Connections
rear of your TV
VHF / UHF
antenna
2 1
disconnect disconnect
or
RF coaxial cable ANT. IN
cable TV
Basic Setup
company
3 Connect cables to the unit.

Make the basic connection as illustrated below.
VHF / UHF
antenna
Recording
rear of this unit
VIDEO VIDEO
IN OUT
L L
R IN R
RF coaxial IN
AUDIO IN
(E1) S-VIDEO AUDIO OUT
cable VIDEO
OUT
or
L
cable TV
company OUT
rear of your TV RCA video
Playback
ANTENNA
R cable
AUDIO OUT
This connection is for
TV loop through only RF coaxial cable RCA audio
cable
ANT. IN
R L
AUDIO IN VIDEO IN
Editing
4 Plug in the power cord of this unit and your TV to the AC outlet.
rear of your TV
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
Function Setup
• RCA video cable x 1

Please purchase the rest of the necessary cables at your
local store.
connect *Once connections are completed, turn on the TV and
HDMI OUT
begin initial setting.
Channel scanning is necessary for the unit to memorize
L
O OUTPUT
TREAM
all available channels in your area.
rear of this unit (Refer to “INITIAL SETTING” on page 25.)
Others
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack
before moving the unit.
Español
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• Antenna out is for tuner pass through only. HDD/DVD playback through the RF is not possible.
EN 15
E2H00UD.indd 15 2007/05/11 10:15:11

RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available
stereo audio/video RF modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
VHF / UHF rear of this unit

antenna VIDEO VIDEO
IN OUT
Y
IN
L
OUT
R IN OUT COAXIAL
AUDIO IN DIGITAL AUDIO OUTPUT
ANTENNA (E1) S-VIDEO AUDIO OUT S-VIDEO PCM/BITSTREAM
RF coaxial IN
cable VIDEO
RCA video
OUT
or cable
L
cable TV
company OUT
rear of your TV
ANTENNA R
AUDIO OUT
RCA audio cable
ANT. IN
rear of your RF modulator

(not supplied)
RF coaxial cable
RF coaxial cable
3 4 R L
ANT. IN CHANNEL AUDIO IN VIDEO IN TO TV
Set channel 3 or 4

Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
16 EN
E2H00UD.indd 16 2007/05/11 10:15:12

CONNECTION TO A CABLE / SATELLITE BOX
Introduction
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Plug in the power cords of the devices to the AC outlet.
e.g.)
satellite rear of your TV
Connections
dish
This connection is for
TV loop through only VIDEO IN AUDIO IN
R L
or
ANT. IN
cable TV RCA audio
company RCA video cable
Basic Setup
rear of this unit cable
RF coaxial cable VIDEO VIDEO Y
IN OUT
IN
PB/CB
L
OUT
R IN OUT
/CR COAXIAL
RF coaxial cable IN ANTENNA AUDIO IN

(E1) S-VIDEO AUDIO OUT S-VIDEO DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
ANT. IN RF OUT
VIDEO VIDEO
IN OUT
cable/satellite OUT Y
Recording
box L L
AUDIO OUT VIDEO S-VIDEO

R L OUT OUT PB/CB
ANTENNA
R IN R PR/CR OUT
AUDIO IN COMPONENT
(E1
L1) S-VIDEO AUDIO OUT VIDEO OUT S-VIDEO
or RCA video cable
Playback
RCA audio cable
S-video cable

Editing
Note
• Required cables and connecting methods differ depending on the cable/satellite box.
Function Setup
For more information, please contact your cable/satellite provider.

• Instead of using video out jack of this unit, you can also use S-VIDEO OUT jack or COMPONENT VIDEO OUTPUT
jacks for connecting to your TV.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the
cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
Others
Note to CATV system installer

Español
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.
EN 17
E2H00UD.indd 17 2007/05/11 10:15:13

CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your existing device.
Method 1 Method 2 Method 3
analog audio standard picture good picture better picture
TV VIDEO S-VIDEO IN COMPONENT

VIDEO IN
IN
AUDIO IN
Y
R L (Green)
PB/CB
(Blue)
PR/CR
(Red)
RCA
and video or S-video or component
cable cable video cable
RCA
this unit audio cable VIDEO
OUT (Green)
Y
L
VIDEO VIDEO Y PB/CB
IN
L
IN OUT
L
VIDEO (Blue)
OUT
OUT L
R IN R
ANTENNA AUDIO IN
(E1) S-VIDEO AUDIO OUT R (Red)
AUDIO OUT
OUT PR/CR
R
S-VIDEO COMPONENT
VIDEO OUT
AUDIO OUT
COMPONENT
AUDIO OUT VIDEO OUT S-VIDEO OUT
VIDEO OUTPUT

Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT
jack.
To set progressive scan mode, refer to page 103

• This unit is compatible with the progressive scan system. The feature provides you with the higher quality images than the
traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.
18 EN
E2H00UD.indd 18 2007/05/11 10:15:13

CONNECTION TO AN AUDIO SYSTEM
Introduction
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2 Channel Analog Audio Connection Digital Audio Connection
stereo system Dolby Digital decoder, MD deck or DAT deck
Connections
audio COAXIAL
AUDIO IN
R L
digital audio coaxial input

analog audio
jack
input jacks
Basic Setup
RCA audio cable digital audio coaxial cable
VIDEO
this unit
OUT
Recording
L VIDEO VIDEO
VIDEO VIDEO Y
IN OUT IN OUT
IN IN
PB/CB
L L L L
OUT OUT
R R R IN R OUT
IN PR/CR OUT COAXIAL PR/CR COAXIAL
COAXIAL
AUDIO IN COMPONENT DIGITAL AUDIO OUTPUT ANTENNA S-VIDEO AUDIO OUT S-VIDEO
ANTENNA (E1) S-VIDEO AUDIO OUT VIDEO OUT S-VIDEO PCM/BITSTREAM (E1) VIDEO OUT PCM/BITSTREAM
DIGITAL AUDIO OUTPUT

R PCM/BITSTREAM
AUDIO OUT
AUDIO OUT DIGITAL AUDIO OUTPUT
Playback
Setting Setup >General Setting >Playback >Disc Audio >
Editing
Connection Dolby Digital
If output is Dolby Digital encoded audio, connect to a Dolby
Stream
Digital decoder.
Connecting to an MD deck or DAT deck. PCM
Function Setup
If not connected to any external devices. PCM

* To complete these settings, refer to page 98.
Note
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
Others
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Español
EN 19
E2H00UD.indd 19 2007/05/11 10:15:14

BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
1
After you have made all the
STANDBY-ON
necessary connections, press
[STANDBY-ON y] to turn on the unit.
SOURCE DTV/TV DISPLAY OPEN/CLOSE
2
A Turn on your TV.
.@/: ABC DEF • If connected to your VCR make sure it is
1 2 3 switched off or in standby mode before
GHI JKL MNO proceeding.
4 5 6
3
PQRS TUV WXYZ
Press “2” on the TV’s remote control,
7 8 9
SPACE CLEAR
then press channel down button
. 0 repeatedly until you see “Initial
DISC MENU SETUP Setup” menu.
o
Initial Setup
s OK B
TITLE RETURN OSD Language
p English
Français
Español
j B i
F h g C
CHANNEL
-- + This is the correct viewing channel (external
AUDIO HDD DVD TIMER
input channel) for the recorder.
• For some TVs, there may be a button on the
REC REPEAT REC MODE D.DUBBING TV’s remote control that accesses the external
I input channel. It may be labeled “SOURCE”,
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT “AV”, or “SELECT”. In such case, press it
repeatedly. Refer to your TV’s user manual for
details.
• If more than 10 minutes have past since you
have turned on the unit, you may see the
MAGNAVOX screen saver instead of “Initial
Setup” menu.
MAGNAVOX screen saver:
Input Mode Names for Common TV Brands (Example)
Admiral AUX Panasonic TV/VIDEO
Curtis LINE1, LINE2, RCA INPUT, TV/VCR,
Mathis 00, 90, 91, 92, 93 00, 90, 91, 92, 93
GE INPUT, TV/VCR, Samsung TV/VIDEO
00, 90, 91, 92, 93
Hitachi INPUT, AUX Sanyo VIDEO
JVC VIDEO, VIDEO 1, Sharp 00
VIDEO 2, VIDEO 3
Kenwood AUX Sony VIDEO1, VIDEO2,
VIDEO3
4
Proceed to step 2 in “INITIAL
LXI-Series 00 Toshiba TV/GAME SETTING” on page 25.
Magnavox AUX CHANNEL Zenith 00
Note
• Video input selection varies for different brand’s
models of TVs.
• Consult your TV manufacturer if none of the above is
successful.
20 EN
E2H00UD.indd 20 2007/05/11 10:15:14

BEFORE YOU START
Introduction
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc or the disc/file in playback, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
Guide to On-Screen Display / Menu

The on-screen display changes in the following order HDD / DVD Information / Menu
Connections
as you press [DISPLAY].
6 7
OFF
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
DTV Program Guide (only in DTV mode) CH 10
HDD / DVD Information/Menu

5 1 2
Basic Setup
Title Name Information DVD SP 1h53m
(only when DVD+RW/DVD+R/DVD-RW/DVD-R, or HDD

is in playback) 4 3
or
* This is an example screen only for explanation.
File Name Information Displayed items may vary depending on the disc you
Recording
(only when a CD with MP3/JPEG/Kodak Picture CD files insert.
is in playback)
1. Indicates the file type or a disc type and format mode.
(DVD mode only)
2. Indicates a channel number or selected external input
channel.
DTV Program Guide 3. Indicates the component in use, a recording mode and
possible recording time left.
Playback
1 5 The on-screen indication of the possible recording
KABC DTV 6.1 time left on HDD / DVD may differ from the actual
2
5 A Day of Memories recordable time as this unit employs the variable
3
5 English 1/2 bit rate encoding system which varies the recording
A quarter-century ago, which may now
qualify as the good old days of (storage) amount of data in conformity with the
newspapering, run-of-paper sales amount of information on the video.
4
5 accounted for 80 percent of the
industry's advertising revenues. 4. Indicates an operation status.
Editing
5. Each icon means:
: Search : Marker
: Audio : Noise Reduction
1. Broadcast station
2. Program title (max. 2 lines displayed)
: Subtitle : Zoom Function Setup
3. Audio language (“Other” is displayed when the : Angle : Surround
audio language cannot be acquired, or the acquired
: Repeat
languages are other than English, Spanish or French.)
4. Program guide (max. 6 lines displayed) 6. Indicates the current title number/total number of
5. Channel number titles, the current chapter number/total number of
chapters, and time lapse of the current title playback/
Note total duration of the title.
• When the program guide is displayed in more than 7 7. Indicates the component in use.
lines, use [K / L] to scroll. : HDD
Others
• “No description provided” is displayed when the : DVD

program guide is not provided.
Español
EN 21
E2H00UD.indd 21 2007/05/11 10:15:15

BEFORE YOU START
Title/File Name Information
Title Name Information
Title Name
My Title
1
File Name Information
File Name
My File
1
1. Displays title/file name.
Main Menu
Press [SETUP] to display the main menu. Then use 1. General Setting:
[K / L] to select a menu and press [OK] to display the To go to general setting menu.
menu. These menus provide entries to all main functions 2. Timer Programming:
of the unit. To program a timer recording.
3. Title List:
Setup
To call up the title list.
1 General Setting
4. Disc Edit:
2 Timer Programming
3 Title List To set up the DVD setting.

4 Disc Edit 5. HDD Menu:
5
4 HDD Menu
To set up the HDD setting.
6
4 Dubbing
7
4 CD Playback Mode 6. Dubbing:
• To dub the content of the HDD to DVD or vice versa.
• “Dubbing” is available only when a recordable disc is
loaded.
7. CD Playback Mode:
To set up the CD playback setting.
• “CD Playback Mode” is available only when an audio
CD, a video CD, a CD-RW/-R with MP3 / JPEG / Kodak
Picture CD files is inserted into the unit.
General Setting Menu
1. Playback:
1 General Setting 8
2 To set up the unit to play back discs as you prefer.
Playback
3 Display
Video
Parental Lock 2. Display:
Disc Audio
4 Recording Disc Menu Language To set up the OSD screen as you prefer.
5 Clock Audio Language
6
2
Channel
Reset All
Subtitle Language 3. Video:
Angle Icon
7
3 Still Mode To set up the video setting.
Variable Skip / Replay
4. Recording:
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you prefer.
7. Reset All:
To reset the setting to the factory default.
8. :HDD
:DVD
Indicates the available mode for the selected function.
22 EN
E2H00UD.indd 22 2007/05/11 10:15:15

BEFORE YOU START
Introduction
Disc Edit / HDD Menu / Dubbing / CD Playback Mode
<Disc Edit menu (DVD+RW)> 1. Edit Disc Name:
Disc Edit
Allows you to rename the disc.
1 Edit Disc Name
2. Erase Disc: (DVD+RW/DVD-RW only)
2 Erase Disc
Allows you to erase all contents in the disc and format it.
3 Make Edits Compatible
4
Disc Protect OFF ON
3. Make Edits Compatible: (DVD+RW only)
Connections
Allows you to memorize the editing status on the
<Disc Edit menu (DVD-RW)> disc if you have added or deleted chapters, or made
Disc Edit chapters hidden on this unit, and to effect it when
1 Edit Disc Name playing back on the other unit.
2 Erase Disc
3 Finalize Finalize: (DVD+R/DVD-RW/-R only)
Disc Protect OFF ON
4 Allows you to finalize a disc containing recorded titles.
4. Disc Protect :
Basic Setup
<Disc Edit menu (DVD+R/DVD-R)> Allows you to protect a disc from accidental editing or
Disc Edit recording.
1 Edit Disc Name 5. Random Play:
3
2 Finalize
4
3 Disc Protect OFF ON Allows you to activate the random playback feature.
6. Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
<CD Playback Mode menu> 7. PBC (Video CD only):
Allows you to select images or information on the
Recording
CD Playback Mode
5
1 Random Play menu screen by activating PBC (playback control)
6
2 Program Play
7
3 PBC (Video CD only) function.
Slide Show
8
4 8. Slide Show: (JPEG / Kodak Picture CD files only)
Allows you to select the display time of the slide show
<HDD Menu> mode.
HDD Menu
9. Delete All Titles:
9
1 Delete All Titles
Allows you to delete all titles, including the protected
Playback
10
2 Delete All Unprotected Titles
titles, in the HDD title list.
10. Delete All Unprotected Titles:
<Dubbing menu> Allows you to delete all unprotected titles in the HDD
Dubbing title list.
11
1 HDD DVD 11. HDD DVD:
2
12 DVD HDD
Allows you to dub from HDD to DVD.
12. DVD HDD:
Editing
Allows you to dub from DVD to HDD.
Function Setup
Others
Español
EN 23
E2H00UD.indd 23 2007/05/11 10:15:16

BEFORE YOU START
Switching HDD / DVD Mode
Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode)
you wish to operate.
HDD mode DVD mode
Press [HDD] to activate the HDD component. Press [DVD] to activate the DVD component.
STANDBY-ON

A
.@/: ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
SPACE CLEAR
. 0
DISC MENU SETUP
s OK B
TITLE RETURN
p
j B i
DVD button
F h g C
HDD button CHANNEL

HDD button
-- +
AUDIO HDD DVD TIMER DVD button

REC REPEAT REC MODE D.DUBBING
I
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT

How to Insert a Disc

1) Press [OPEN/CLOSE A] to open the disc tray.
2) Place the disc on the disc tray with its label side facing up.
Align the disc to

the disc tray guide.
3) Press [OPEN/CLOSE A] to close the disc tray.

It may take a while to load
the disc.
To eject the disc:

Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning off the unit.
• When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format.

• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.
24 EN
E2H00UD.indd 24 2007/05/11 10:15:17

INITIAL SETTING
Introduction
You need to follow these steps when you turn on this unit for the first time.
1
Follow the procedure in “Finding the
STANDBY-ON Viewing Channel on Your TV” on
page 20 to display “Initial Setup”
SOURCE DTV/TV DISPLAY OPEN/CLOSE menu.
A
Connections
2
.@/: ABC DEF Use [K / L] to select your desired
1 2 3 language, then press [OK].
GHI JKL MNO
4 5 6 Initial Setup
PQRS TUV WXYZ
7 8 9 OSD Language
SPACE CLEAR English

Français
. 0
Basic Setup
Español
DISC MENU SETUP
3
o Use [K / L] to select the type of
broadcasting signal, then press [OK].
s OK B
TITLE RETURN Initial Setup
Recording
Channel Preset
j B i
Make sure the antenna is
connected to “ANTENNA IN” jack.
F h g C Antenna
Cable (Analog)
Cable (Analog / Digital)
CHANNEL
-- + The unit will start getting channels available in
AUDIO HDD DVD TIMER your area.
Antenna:
(When using antenna)
Playback
I
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
Editing
automatically scanned and memorized.
Cable (Analog / Digital):

(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
Function Setup
CH 1
Auto Presetting Now
Entry screen for the clock setting will appear.
4
Proceed to step 5 in “Manual Clock
Setting” on page 30.
Others
• If a PBS (public broadcasting station) is

available in your area, follow “Auto Clock
Setting” on page 29.
Español
EN 25
E2H00UD.indd 25 2007/05/11 10:15:19

CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Auto Channel Scan
1
STANDBY-ON
Press [SETUP] and use [K / L] to
select “General Setting”, then press
SOURCE DTV/TV DISPLAY OPEN/CLOSE [OK].
A “General Setting” menu will appear.
.@/: ABC DEF
1 2 3
2
Use [K / L] to select “Channel”, then
GHI JKL MNO
4 5 6 press [OK].
PQRS TUV WXYZ “Channel” menu will appear.
7 8 9
3
SPACE CLEAR
Use [K / L] to select “Auto Channel
. 0
Preset”, then press [OK].
DISC MENU SETUP
4
s OK B Use [K / L] to select the type of
TITLE RETURN broadcasting signal, then press [OK].
p
Auto Channel Preset
j B i
Antenna
F h g C
Cable (Analog)
Cable (Analog / Digital)
CHANNEL
-- + The unit will start getting channels available in
your area.
AUDIO HDD DVD TIMER
• When aerial antenna is connected, select
“Antenna”.
I • When connected to CATV, select “Cable
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT (Analog)” or “Cable (Analog/Digital)”.
To cancel the auto channel preset during
scanning:
Press [RETURN] or [SETUP] to cancel.
5
When scanning is over, press [SETUP]
to exit.

To cycle through only the memorized channels, use

[CHANNEL / ].
To select a channel directly (including the ones not
memorized), use [the Number buttons].
Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
26 EN
E2H00UD.indd 26 2007/05/11 10:15:20

CHANNEL SETTING
Introduction
Adding / Deleting Channels
You may want to add or delete TV channels if your
1
channel lineup changes or if you no longer watch some Press [DTV/TV] to select the mode
channels. (DTV or TV) to/from which you want
Adding channel is only available for the analog TV
channels.
to add/delete channels.
Connections
Make sure
2
• You perform “Auto Channel Scan” before adding or
deleting the channels. select “General Setting”, then press
[OK].
“General Setting” menu will appear.
STANDBY-ON
3
Basic Setup
SOURCE DTV/TV DISPLAY OPEN/CLOSE press [OK].
A “Channel” menu will appear.
.@/: ABC DEF
1 2 3
4
GHI JKL MNO
Use [K / L] to select “Manual Channel
4 5 6 Preset”, then press [OK].
PQRS TUV WXYZ
7 8 9 Auto Channel Preset
Recording
Manual Channel Preset
SPACE CLEAR
TV Audio Select
. 0
DISC MENU SETUP • If you are adding or deleting analog TV/CATV
o channels, go to ANALOG to continue.
• If you are deleting digital TV/CATV channels, go
s OK B to DIGITAL to continue.
TITLE RETURN
Playback
p
j B i
F h g C
CHANNEL
-- +
AUDIO HDD DVD TIMER
Editing
I
Function Setup

Others
Español
Instructions continue on the next page.
EN 27
E2H00UD.indd 27 2007/05/11 10:15:21

CHANNEL SETTING
ANALOG DIGITAL
5 5
Select the channel number to add or Select the channel number to delete.
delete. • Only the major channel is displayed in “Manual
• Use [CHANNEL / ] to cycle through only Channel Preset” menu. (The channel number
the memorized channels. displayed in the parenthesis is a virtual channel
number)
• Use [{ / B] to cycle through all the channels
including the ones not memorized. • Use [CHANNEL / ] to cycle through only
the memorized channels.
• Use [the Number buttons] to select a channel
directly. • You cannot use [{ / B] for the digital TV
channel selection.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default. • Use [the Number buttons] to select a channel
directly.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a • When a memorized channel is selected, “Add”
default. is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
6
Use [K / L] to select “Add” or default.
“Delete”, then press [OK].
6
Manual Channel Preset Use [K / L] to select “Delete”, then
press [OK]. Then select the next
CH 2
channel to delete.
Add • If the setting is complete, press [RETURN] to
Delete
activate “Manual Channel Preset”.
Manual Channel Preset
Your setting will be activated and it will DTV 2 (CH - - - )
automatically switch to the next channel so that Add

Delete
you can continue adding or deleting channels.
7
Press [SETUP] to exit.
Your setting will be activated.
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
7
28 EN
E2H00UD.indd 28 2007/05/11 10:15:22

SETTING THE CLOCK
Introduction
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 30.
Auto Clock Setting
1
This unit can set the time and date automatically by Press [SETUP] and use [K / L] to
referring to a PBS station. select “General Setting”, then press
Connections
Make sure [OK].
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to page 26.) “General Setting” menu will appear.
• If this unit is connected to a cable/satellite box,
2
select the local PBS station on them to set the clock Use [K / L] to select “Clock”, then
automatically. press [OK].
“Clock” menu will appear.
Basic Setup
STANDBY-ON
3
Use [K / L] to select “Auto Clock
SOURCE DTV/TV DISPLAY OPEN/CLOSE Setting”, then press [OK].
A
.@/: ABC DEF
4
1 2 3 Use [K / L] to select “Auto”, then
GHI JKL MNO
4 5 6
press [OK].
Recording
PQRS TUV WXYZ Auto Clock Setting
7 8 9
OFF
SPACE CLEAR
Auto
. 0 Manual
DISC MENU SETUP
5
s OK B
Playback
TITLE RETURN
p
6
Press [STANDBY-ON y] to turn off
j B i
the unit.
F h g C This unit will search for the time only when the
CHANNEL
power is off. Leave it off for several minutes to
-- + give this unit time to set the clock.
Editing
AUDIO HDD DVD TIMER

I

If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
Function Setup
1
Select “Manual” at step 4, then press
[OK].
2
Use [the Number buttons] or [K / L]

to enter your PBS channel number,
then press [OK].
Others
Set Channel No.
Note CH 1
• The clock may set itself automatically after you

connect the antenna/cable signal and plug in the
3
power cord. Press [SETUP] and turn off the unit.
• Only the analog PBS channel signal is effective for
Español
auto clock setting.

• The unit receives the clock data at 12:00 a.m. / p.m.
from the PBS channel when the power is off.
EN 29
E2H00UD.indd 29 2007/06/26 11:05:35

SETTING THE CLOCK
Manual Clock Setting Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
1
Press [SETUP] and use [K / L] to automatically adjust the time in order to fit the daylight
select “General Setting”, then press saving time.
[OK]. “ON (MAR - NOV)” has been selected as the default.
1
2
Use [K / L] to select “Clock”, then
press [OK].
[OK].
3
Use [K / L] to select “Clock Setting”,
2
Use [K / L] to select “Clock”, then
then press [OK].
press [OK].
4
Use [K / L] to select calendar or time,
3
Use [K / L] to select “Daylight Saving
then press [OK].
Time”, then press [OK].
Clock Setting
JAN / 01 / 2007 ( MON )
4
12 : 00 AM
Use [K / L] to select “ON (MAR -
NOV)”, “ON (APR - OCT)” or “OFF”,
5
Use [{ / B] to select an item to set, then press [OK].
and use [K / L] to select the contents Daylight Saving Time
to suit your preference, then press ON (MAR - NOV)
[OK] when you finish setting all the ON (APR - OCT)
OFF
contents.
ON (MAR - NOV):
Clock Setting
Move forward one hour on the second Sunday in
JAN / 01 / 2007 ( MON ) March and move back one hour on the first
12 : 00 AM
Sunday in November.
Your setting will be activated. ON (APR - OCT):
The clock start counting when you press [OK]. Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
6
5
Note
• Your setting will be canceled if you press [RETURN]
before pressing [OK] at step 5.
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2007
up to 2056.
30 EN
E2H00UD.indd 30 2007/05/11 10:15:23

TUNER SETTINGS
Introduction
<Digital TV Channels>
Switching Analog Mode / Enter the major and minor channel number with [the
Digital Mode Number buttons] to select a channel you want to watch.
For 1-digit number
You can easily switch the analog TV (NTSC) and digital TV e.g.) 2-2 ch:
(ATSC) with the remote control. major channel [0] + [2] or [2] + [•]
minor channel [0] + [2], [2] + [•] or
Connections
Press [DTV/TV] on the remote control. [2] + leave it for 2 seconds.
• The analog mode and digital mode switch alternately. For 2-digit number
e.g.) 35-16ch:
Note major channel [3] + [5]
minor channel [1] + [6]
• When you switch the analog mode to the digital
mode, it may take about 10 seconds until the digital • If you enter 1 digit for major channel and leave it for 2
channel selection is completed. The following screen seconds, the number will be taken as the major channel
is displayed while switching the mode. and lowest minor channel of the major channel will be
Basic Setup
displayed.
DTV 125. 1
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Now Scanning Note

• It may take up to 5 to 7 seconds to switch the digital
TV channels.
Recording
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
Channel Selection About digital TV broadcasting:

With its high definition broadcast, digital broadcasting far
Select channels by using [CHANNEL / ] or [the surpasses analog broadcasting in both its picture and
Number buttons] found on remote control. sound quality.
Playback
[CHANNEL / ] What is the minor channel?
Use [CHANNEL / ] to change the channel. By using high compression technology, digital
broadcasting offers a service that enables multiple signals
[the Number buttons] to send simultaneously.
Press the channel number with [the Number buttons] to Therefore, you can select more than one program per
select a channel you want to watch. major channel since digital broadcasting technology
<Analog TV Channels> distinguishes between multiple channels broadcast by a
Editing
Enter the channel number with [the Number buttons] to signal network.
select a channel you want to watch.
NTSC (analog mode) [Air Time] ATSC (digital mode)
For 1-digit number 18:00
e.g.) 2 ch: [0] + [2], [2] + [•] or CH4-1 smallest smallest
[2] + leave it for 2 seconds. CH CH
18:30
For 2-digit number
Function Setup
CH4-1 CH4-2 CH4-3

e.g.) 12ch: [1] + [2]
CH4 19:00
CH4-1 smallest CH4-3
CH
19:30
CH4-1 CH4-2 smallest
CH
20:00
major channel minor channel

Others
: change automatically
: change manually by using [CHANNEL / ]
Español
EN 31
E2H00UD.indd 31 2007/05/11 10:15:23

TUNER SETTINGS
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be
recorded.
Selecting TV Audio
Digital TV
1
Press [AUDIO] to cycle through
STANDBY-ON available audio languages.
English 1/2
A
.@/: ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
SPACE CLEAR
.
• When you press [AUDIO], selected language
0 will be displayed on the TV screen.
DISC MENU SETUP
• Every time you press [AUDIO], the language
o
will be switched.
e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3
s OK B
• Available languages differ depending on the
TITLE RETURN
broadcast.
p
• The language information display will
j B i automatically disappear.
• When you record digital TV broadcasting, the
F h g C
audio language you have selected will be
CHANNEL recorded.
-- +
AUDIO HDD DVD TIMER

I

Note
• You cannot change the audio language for the timer
recording of digital TV broadcasting.
• Pressing [AUDIO] does not control external device
audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
32 EN
E2H00UD.indd 32 2007/05/11 10:15:24

TUNER SETTINGS
Introduction
Selecting TV Audio (cont’d)
Analog TV
1
STANDBY-ON
Connections
.@/: ABC DEF
1 2 3
2
GHI JKL MNO
4 5 6 press [OK].
“Channel” menu will appear.
Basic Setup
PQRS TUV WXYZ
7 8 9
3
.
SPACE CLEAR
Use [K / L] to select “TV Audio
0
DISC MENU SETUP
Select”, then press [OK].
o
4
s OK B Use [K / L] to select “Stereo” or
Recording
TITLE RETURN
“SAP”, then press [OK].
p
TV Audio Select
j B i
Stereo
F h g C SAP
CHANNEL Stereo:
-- + Outputs main-audio.
Playback
AUDIO HDD DVD TIMER SAP (secondary audio program):
Outputs sub-audio.
I
5
Editing
Note on recording analog TV audio
Function Setup
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “General Setting” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected Broadcast Disc Audio

audio audio recording output
Stereo STEREO+SAP STEREO STEREO
Others
STEREO STEREO STEREO

MONO+SAP MONO MONO
MONO MONO MONO
SAP STEREO+SAP SAP SAP
STEREO STEREO STEREO
Español
MONO+SAP SAP SAP

MONO MONO MONO
EN 33
E2H00UD.indd 33 2007/05/11 10:15:24

TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
1
STANDBY-ON
[OK].
A
2
.@/: ABC DEF Use [K / L] to select “Display”, then
1 2 3 press [OK].
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
3
7 8 9 Use [K / L] to select “CC Style”, then
SPACE CLEAR press [OK].
. 0
DISC MENU SETUP
OSD Language
Screen Saver
o
FL Dimmer
CC Style
s OK B V-Chip
TITLE RETURN
p
4
Use [K / L] to select “DTV CC”, then
j B i press [OK].
F h g C CC Style
CHANNEL DTV CC
-- + User Setting
Font Size
AUDIO HDD DVD TIMER Font Style
Edge Type
Font Opacity
Font Color
I
Back Opacity
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Back Color
5
Use [K / L] to the desired DTV closed
caption, then press [OK].
DTV CC
OFF
Service1

Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
6
Note
• Even if you set “DTV CC” to anything other than
“OFF”, its effect will temporarily be canceled while
recording.
34 EN
E2H00UD.indd 34 2007/05/11 10:15:25

TUNER SETTINGS
Introduction
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
Connections
1
STANDBY-ON
.@/: ABC DEF
1 2 3
2
GHI JKL MNO
Use [K / L] to select “Display”, then
press [OK].
Basic Setup
4 5 6
PQRS TUV WXYZ
7 8 9
3
.
SPACE CLEAR
Use [K / L] to select “CC Style”, then
0
DISC MENU SETUP
press [OK].
o
OSD Language
Screen Saver
Recording
s OK B FL Dimmer
TITLE RETURN CC Style
V-Chip
p
4
j B i
Use [K / L] to select “User Setting”,
F h g C then press [OK].
CHANNEL CC Style
Playback
-- +
DTV CC
AUDIO HDD DVD TIMER User Setting
Font Size
Font Style
Edge Type
I
Font Opacity
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Font Color
Back Opacity
Back Color
5 Editing
Use [K / L] to select “ON”, then press
[OK].
User Setting
Function Setup
ON
OFF
Others
Español
Instructions continue on the next page.
EN 35
E2H00UD.indd 35 2007/05/11 10:15:26

TUNER SETTINGS
6
Use [K / L] to select the item and <Font Color>
switch the setting for each item you Font color of the displayed caption can be
switched as below.
want to set, then press [OK].
Font Color
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User Transparent
Setting” will be displayed. White
Black
• The setting description for each item is shown Red
below. Green
Blue
Yellow
<Font Size> Magenta
Cyan
Font size of the displayed caption can be
switched as below.
<Back Opacity>
Font Size Background opacity of the displayed caption can
Middle be switched as below.
Large
Small Back Opacity
Solid
<Font Style> Translucent
Font style of the displayed caption can be Flash
switched as below.
<Back Color>
Font Style
Background color of the displayed caption can
Style1 be switched as below.
Style2
Style3 Back Color
Style4 Transparent
Style5 White
Style6 Black
Style7 Red
Style8 Green
Blue
<Edge Type> Yellow
Edge type of the displayed caption can be Magenta
Cyan
switched as below.
Edge Type
7
None Press [SETUP] to exit.
Raised
Depressed
Uniform
L.Shadow
R.Shadow
<Font Opacity>
Font opacity of the displayed caption can be
switched as below.
Font Opacity
Solid
Translucent
Flash
36 EN
E2H00UD.indd 36 2007/05/11 10:15:26

INFORMATION ON RECORDING
Introduction
Before you make a recording, read the following information.
Recordable Discs Unrecordable Discs
This unit can record to DVD+RW, DVD+R, DVD-RW and • DVD-RW recorded in the mode other than +VR is not
DVD-R. recordable on this unit unless you erase all contents in
DVD+R/DVD-R can only be recorded to once. DVD+RW/ the disc (refer to page 90).
DVD-RW can be recorded to and erased many times. • DVD-R recorded in the mode other than +VR is not
Connections
DVD-RW/-R will be recorded in the DVD+VR mode recordable on this unit.
automatically in this unit.
Logo Attributes Maximum recordable numbers of title / chapters
HDD : 600 titles
99 chapters per title
DVD : 49 titles per disc
8cm/12cm, single-sided, 254 chapters per disc
Basic Setup
DVD+RW DVD+R single layer disc 99 chapters per title
Approx. max. recording time
(SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD-RW DVD-R
Recording
• Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x,
DVD-R 8x, DVD-RW 2x
Playback
JVC DVD-RW 4x
Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY DVD+R 4x/8x/16x, DVD+RW 4x
TDK DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
Editing
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 91 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize. Function Setup
Others
Español
EN 37
E2H00UD.indd 37 2007/05/11 10:15:27

INFORMATION ON RECORDING
Recording Mode About HDD
You can select a recording mode among 6 options, and HDD is a special device which has high recording density
the recording time will depend on the recording mode and is suited for long-time recording or high-speed
you select as follows. cueing but by contrast, has many factors which can cause
breakage. Use HDD on the premise that you should dub
Recording Recording Video/sound
Disc size
mode time quality the recorded programs to a DVD to protect your precious
videos.
HQ 18 min (good)
HDD is a temporary storage location:
SP 36 min
HDD is not a permanent storage location of the recorded
8cm Disc SPP 45 min contents. Be sure to use it as a temporary storage location
LP 54 min until you watch the programs once, edit them, or dub
EP 72 min them to a DVD.
SLP 108 min (poor) Be sure to dub (back up) data promptly if you find
HQ 60 min (good) abnormalities in HDD:
SP 120 min If there is mechanical trouble with the HDD, grinding or
SPP 150 min other sounds may be heard or blocky noise may appear
12cm Disc on the image. If you continue to use as it is, deterioration
LP 180 min
EP 240 min
may continue and eventually the HDD may not be used
at all. If you notice these symptoms of a failing HDD,
SLP 360 min (poor)
promptly dub the data to a DVD. When an HDD fails,
HQ 15 hrs (good)
recovery of recorded content (data) may be impossible.
SP 30 hrs About the remaining capacity of HDD recording time:
SPP 37.5 hrs The on-screen indication of the possible recording time
HDD
(Internal) LP 45 hrs left on HDD / DVD may differ from the actual recordable
EP 60 hrs time as this unit employs the variable bit rate encoding
SLP 90 hrs (poor) system which varies the recording (storage) amount of
data in conformity with the amount of information on the
• The recording time is only an estimate. The actual video.
recording time may differ. Before recording to the HDD, ensure there is sufficient
• The audio and video quality gets poorer as the recording space on the HDD by deleting unnecessary titles in
time becomes longer. advance.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed.
Note
• This unit cannot record to CD-RW or CD-R.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
• You cannot record copy-protected program using
this unit. (Copy-protected signal is included in DVD-
video or some satellite broadcasts.)
• You cannot record “copy-once only” program on
DVD.
38 EN
E2H00UD.indd 38 2007/05/11 10:15:27

BEFORE RECORDING
Introduction
Make Recording Compatible Setting for Auto Chapter
You can set a specified time for chapter marks.
Use this feature to make the unfinalized +VR mode discs 1) Press [SETUP] and use [K / L] to select “General
recorded on other unit recordable on this unit. When you Setting”, then press [OK].
Connections
make an additional recording on this unit with “Make
Recording Compatible” set to “ON”, the title menu is
automatically converted to our style.
2) Use [K / L] to select “Recording”, then press [OK].
1) Press [SETUP] and use [K / L] to select “General “Recording” menu will appear.
Setting”, then press [OK].
“General Setting” menu will appear. 3) Use [K / L] to select “Auto Chapter”, then press [OK].
Basic Setup
2) Use [K / L] to select “Recording”, then press [OK]. 4) Use [K / L] to select a desired time option, then
“Recording” menu will appear. press [OK].
Auto Chapter
3) Use [K / L] to select “Make Recording Compatible”, OFF
then press [OK]. 5 minutes
10 minutes
15 minutes
Recording
4) Use [K / L] to select “ON” or “OFF”, then press [OK]. 30 minutes
60 minutes
Make Recording Compatible
ON
OFF 5) Press [SETUP] to exit.
ON: Title list will be replaced when you make
additional recordings to the discs recorded by
other units. Note
Playback
OFF: Prohibiting additional record to the disc that • The interval for auto chapter marks may slightly
has a title list created by other units. differ.
• A blank chapter may be created depending on the
remaining time of the disc.
5) Press [SETUP] to exit.
Editing
Function Setup
Others
Español
EN 39
E2H00UD.indd 39 2007/05/11 10:15:27

BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
If you are recording to the HDD, press [HDD] first, then
proceed to step 2.
STANDBY-ON If you are recording to a disc, press [DVD] first.
1
Insert a recordable disc (refer to page
A
.@/: ABC DEF
24 on how to insert a disc).
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
SPACE CLEAR Align the disc to
. 0 the disc tray guide.
DISC MENU SETUP
o * Make sure the disc is compatible with this unit.

(Refer to page 37 for the list of compatible discs.)
s OK B
TITLE RETURN It may take a while to load
p the disc.
j B i • When inserting a brand-new DVD+RW/DVD-
RW, the unit automatically starts to format.
F h g C (Except when HDD is recording, or when there
CHANNEL is a timer program which starts in 15 minutes.)
-- + • If titles have been recorded on the disc, the
AUDIO HDD DVD TIMER
title list is displayed. Press [STOP C] to exit the
title list.
2
I Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 38.

DVDSP 0h58m
3
Select the appropriate external input
channel by pressing [SOURCE] or
[CHANNEL / ].
Press [DTV/TV] to select analog TV or
digital TV, then use [CHANNEL / ]
or [the Number buttons] to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 31.
CH 12
40 EN
E2H00UD.indd 40 2007/05/11 10:15:28

BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Introduction
4 5
Press [REC I] to start recording. Press [STOP C] to stop recording.
“I HDD” or “I DVD” will be displayed for 5 seconds.
e.g.) DVD As for DVD recording, the title list will appear
automatically after writing to a disc complete.
(Refer to “Guide to a Title List” on page 74.)
e.g.) DVD+R
Connections
I DVD
Press [PAUSE F] to pause recording.

Press [PAUSE F]] or [REC I] again to restart
recording.
To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks
of 30 minutes.
Basic Setup
Writing to Disc 90%
Press [REC I] repeatedly until the desired recording

time (30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
1 SP
I 0h30m NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
0h30m 1h00m
(normal recording)
Recording
EMPTY TITLE
1:41:17 SP
6h00m 5h30m
To change the recording length during the one-
touch timer recording:
Press [REC I] repeatedly until the desired length appear. • Press [STOP C] to exit the title list.
To cancel the one-touch timer recording within the
specified time:
Playback
Press [STOP C].
When the recording is completed, the unit will ask
you whether to turn off the unit except under
conditions listed below.
- If a timer recording is programmed to start in 4 minutes.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
Editing
• The unit will be turned off automatically if you select
“Yes” or if you do not reply in 1 minute.
Note
• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
Function Setup
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 32-33 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
• You can play back a title on one component while making a recording on other. To do so, simply select the
component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD
Others
recording. And then follow the normal playback procedure.

• If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD]
or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
Español
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
EN 41
E2H00UD.indd 41 2007/05/11 10:15:30

TIMER RECORDING
You can program the unit to record up to 36 programs Guide to Timer Programming Display
within a month in advance. Daily or weekly program
recordings are also available. 3 1 2
Before recording, make sure Timer Programming
FEB/20/07 10:30 AM 125.1 SP

• Set the clock before setting a timer programming. SP (1:00) MON FEB/19 11:30AM
• If you are recording to a disc, insert a recordable disc Date Start End CH
with enough recordable space. FEB/20 10:30AM 11:30AM DTV125. 1

New Program
6
STANDBY-ON
1/1

4 5
A
.@/: ABC DEF 1 Title of a timer program (Contains date, time, channel,
1 2 3 recording mode of the program)
GHI JKL MNO
2 Current date and time
4 5 6 3 Recording mode, and length of the recording
PQRS TUV WXYZ 4 Timer program list
7 8 9 5 Total number of pages and current page (6 pages
SPACE CLEAR
maximum)
. 0 6 Recording media
DISC MENU SETUP
1
s OK B
Press [TIMER].
TITLE RETURN
p
2
j i
Use [K / L] to select “New Program”,
CHANNEL
Timer Programming
-- +
AUDIO HDD DVD TIMER MON FEB/19 11:30AM
Date Start End CH

New Program
I
1/1
3
Use [K / L] to enter the date, then
press [B].
Date Start End
FEB/20 --:-- --:--
CH REC To Mode
DTV125. 1 HDD SP
SP 2h00m
JAN/01
When pressing [L] at
p
Daily the current date, the
p date will change as
MON-SAT
p follows.
MON-FRI
p e.g.) January 1st
Note SAT
• If you have not set the clock yet: p
FRI
Entry screen for the clock setting will appear instead p
of the timer programming list at step 1. Continue p SUN
with the step 4 in “Manual Clock Setting” on page 30 p
before setting a timer programming.
JAN/31
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.
42 EN
E2H00UD.indd 42 2007/05/11 10:15:30

TIMER RECORDING
Introduction
4 7
Use [K / L / s / B] or [the Number Use [K / L] to select a recording
buttons] to enter the start and end mode.
time, then press [B]. Date Start End
FEB/20 10 : 30AM 11 : 30AM
Date Start End CH REC To Mode
FEB/20 10 : 30AM --:-- DTV125. 1 DVD SP
CH REC To Mode SP 1h00m
DTV125. 1 HDD SP
SP 2h00m
Refer to “Recording Mode” on page 38.
Connections
• You can check the remaining recordable space
of the disc when you select the recording mode.
5
Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or Date
FEB/20
Start
10 : 30AM
End
11 : 30AM
external input (E1 / E2), then press CH
DTV125. 1
REC To
DVD
Mode
SP
[B]. SP 1h00m
e.g.) external input mode
Basic Setup
Auto recording mode select (DVD only)...
Date Start End
FEB/20 10 : 30AM 11 : 30AM When “Auto” is selected as a recording mode, the unit
E1
CH REC To
HDD
Mode
SP
calculates how much time is available on the disc and
SP 1h00m selects the best recording mode available
automatically to complete recording the program.
To record from external input (e.g., cable/
satellite box), select E1 or E2. Date Start End
FEB/20 10 : 30AM 11 : 30AM
Use [K / L] to select the channel number to
Recording
CH REC To Mode
record. DTV125. 1 DVD Auto

Auto 1h00m
For digital mode, select both major and minor
channels. Refer to “How to select a channel • “Auto” is only available for one program in the timer
number for the timer recording” on page 44 program list.
for more details.
e.g.) analog mode Alternate recording (DVD only)...
If there is no recordable disc in the unit, if the disc does not
Playback
Date Start End
FEB/20 10 : 30AM 11 : 30AM have enough space to complete the recording, or if the
CH REC To Mode
10 HDD SP
material is “copy-once” program and prohibited to be
SP 1h00m recorded on a DVD, the unit will detect it and automatically
record to the HDD even when DVD is selected as the
e.g.) digital mode recording media. If the available space on the HDD is
Date Start End
less than that of DVD, the unit will not perform the
FEB/20 10 : 30AM 11 : 30AM alternate recording. This feature is available only for
CH REC To Mode
timer recording. Not available for one-touch timer
Editing
DTV125. 1 HDD SP
SP 1h00m recording.
8
Press [OK] when all items are
6
Use [K / L] to select the recording
media (“HDD” or “DVD”), then press entered.
[B]. will appear on the front panel display.
Function Setup
e.g.) recording to DVD Timer Programming
FEB/20/07 10:30 AM 125.01 SP

Date Start End SP (1:00) MON FEB/19 11:30AM
FEB/20 10 : 30AM 11 : 30AM
Date Start End CH
CH REC To Mode
FEB/20 10:30AM 11:30AM DTV125. 1
DTV125. 1 DVD SP
New Program
SP 1h00m
1/1
Others
Your program setting is now stored.

• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
Español
• To correct the timer program refer to

“Checking, canceling, or correcting the timer
programming information” on page 44.
EN 43
E2H00UD.indd 43 2007/05/11 10:15:32

TIMER RECORDING
How to select a channel number for the timer recording
Analog TV For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
Digital TV For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
Digital CATV For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
minor channels For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
To stop the timer recording in progress If the timer program did not complete correctly,
Press [STOP C] on the front panel of the unit to stop the error number appears in the timer pro-
the timer recording in progress. gramming list.
[STOP C] on the remote control is not effective.
Timer Programming
Checking, canceling, or correcting the timer FEB/20/07 10:30 AM 125.1 SP

SP (1:00) TUE FEB/20 1:00PM
programming information Date Start End CH
1) Press [TIMER]. E41 FEB/20 10:30AM 11:30AM DTV125. 1
New Program
2) Check the information.
Timer Programming
FEB/20/07 10:30 AM 125.1 SP 1/1

SP (1:00) MON FEB/19 11:30AM
Date Start End CH Each error number means:

FEB/20 10:30AM 11:30AM DTV125. 1
New Program
E1-22 Recording error other E42 No disc when
E37-39 than below recording
E24 Unrecordable disc E43 Already 49 titles
1/1 recorded
E25-26 Copy prohibited E44 Already 254 chapters
3-A) To delete the timer program: program recorded
1 Use [K / L] to select the program you want to E29 Disc protected E45 Copy prohibited
delete, then press [OK]. program
2 Use [K / L] to select “Delete”, then press [OK]. E30 Disc full E46 It is impossible to
Confirmation window will appear. record additionally
E35 PCA full *1 on a disc recorded
3 Use [K / L] to select “Yes”, then press [OK].
E36 Already finalized by other units
3-B) To correct the timer program: video format disc when setting “
1 Use [K / L] to select the program you want to Make Recording
correct, then press [OK]. Compatible” to “OFF”.
2 Use [K / L] to select “Program Change”, then E40 Some portion has E47 Already 600 titles
press [OK]. not been recorded recorded on the HDD
3 Correct the timer program by using because of program
[K / L / { / B], then press [OK]. overlapping. E49 HDD recording is
Recording did not canceled due to the
4) Press [TIMER] to exit. start at the start time.
insufficiency of the
E41 Power failed disc space on the
Note HDD.
• Press [TIMER] to check the timer recording in progress. • E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• As to the timer recording in progress (which is shown
in red in the timer program list), you only can edit • A program with the error number is grayed in the timer
the end time. The changes made during recording programming list.
will be recognized as only specific to that recording • Timer program with an error number will be cleared
in progress and it will not affect the daily or the once the entry screen for the program is displayed.
weekly recording setting. *1 PCA is a disc's space reserved for recording test.
44 EN
E2H00UD.indd 44 2007/05/11 10:15:33

TIMER RECORDING
Introduction
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer
programming will be lost.
• When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to
page 43).
• When a timer recording is completed, the unit will ask you whether to turn off the unit if there is no timer recording
Connections
which starts within 4 minutes, except under conditions listed below.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned off automatically if you select “Yes” or if you do not reply in 1 minute.
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted
and be cleared for redoing.
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you
press [OK] at step 8 on page 43.
Basic Setup
• You cannot change the audio language for the timer recording of digital TV broadcasting.
• Timer recording whose recording time exceeds 12 hours cannot be made.
• It is prohibited to turn off the unit from 4 minutes before the programmed starting time.
• It is prohibited to change channel from 15 seconds before the programmed starting time.
• [REC I] does not work from 2 minutes before the programmed starting time. If it comes to 2 minutes before the
starting time during regular or one-touch timer recording, the recording in progress will be stopped.
• Playback of DVD is prohibited from 2 minutes before the programmed starting time when the recording media is
Recording
DVD. If it comes to 2 minutes before the programmed starting time during DVD playback, the playback will be
stopped.
The Priority of Overlapped Settings

• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
Playback
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
Editing
PROG. A
PROG. B
actual
recording PROG.
PROG.AA PROG. B
Function Setup
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording

• When the recording time of 2 programs are overlapped, or When the end time of the programming
the end time of a program and the start time of another currently being recorded and the start time
program is the same, the first 2 minutes (at the longest) of of the subsequent program are same:
the subsequent program will be cut off. The beginning of the PROG. B may be cut off.
• If the cut-off portion comes up to 3 minute or more, this PROG. A
program will be displayed with error number E40 in the
Others
timer programming list. PROG. B

actual
recording PROG. A PROG. B
The first 2 minutes (at the longest) will be cut off.

Español
EN 45
E2H00UD.indd 45 2007/05/11 10:15:33

SPECIAL RECORDING
Time Shift Recording
With [TIME SHIFT], even if you leave your couch while
you are watching TV through this unit, you can come
STANDBY-ON back and watch the rest of the program from right where
you left at any convenient time with just one touch of a
button.
A
.@/: ABC DEF
1
1 2 3 When you leave the TV, press [TIME
GHI JKL MNO SHIFT] twice.
4 5 6 With the first press, the unit will start recording
PQRS TUV WXYZ
the TV broadcast.
7 8 9
With the second press, the unit will be in the
SPACE CLEAR
. pause mode as soon as it starts the time shift
0 playback (refer to page 66). (It is as if you paused
DISC MENU SETUP
the live TV broadcast.)
o
2
s OK B When you come back, press [TIME
TITLE RETURN SHIFT] again.
p The pause mode will be canceled, and the
playback will start from the point you pressed
j B i
the button for the second time in step 1.
F h g C • While viewing the recorded content, you can
pause and resume the playback by pressing
CHANNEL
-- +
[TIME SHIFT].
AUDIO HDD DVD TIMER Press Stop once to resume Live TV.
Press Stop twice to stop TIME SHIFT MODE.
TIME SHIFT MODE

I

[TIME SHIFT]
Press Stop once to resume Live TV.

Press Stop twice to stop TIME SHIFT MODE.
TIME SHIFT MODE
3
Press [STOP C] once to resume live

TV.
Press [STOP C] twice to stop time
shift mode.
Note
• If you press [TIME SHIFT] when the unit is in DVD
mode, the output mode will automatically be
switched to HDD, and the unit will start the time shift
playback of the title being recorded.
• You can also use the special playback functions such
as [E], [D] etc. during time shift recording mode.
• The programs you recorded with [TIME SHIFT] will
not be stored in the title list.
• [REC I] is invalid during time shift recording mode.
• You can no longer fast forward the playback when it
comes to a few second before the current recording
point.
• Time shift recording mode will stop not only when
you press [STOP C] twice, but also when the disc
runs out of space, when the recording time exceeds
12 hours, or when it comes to 2 minutes before timer
recording.
46 EN
E2H00UD.indd 46 2007/05/11 10:15:34

SPECIAL RECORDING
Introduction
Overwriting from the Beginning of Overwriting in the Middle of the Title
the Title
You can overwrite the existing title from the selected

You can overwrite the existing title from the beginning. position.
1) Press [STANDBY-ON y]. 1) Follow the steps 1, 2 and 4 on the left.
Connections
Make sure that the TV input is set on the unit.
2) Load the disc that includes a title to be overwritten. 2) Use [K / L] to select “Play”, then press [OK].
Playback will start.
It takes a while to display
the title list.
3) Press [PAUSE F] at the point from which you want
Title list will appear. to start overwriting.
If the title list does not appear, press [TITLE].
Basic Setup
3) Press [REC MODE] to select a recording mode. 4) Press [REC I].
Refer to “Recording Mode” on page 38. “F I DVD”, display menu, channel, and the time lapse
will be displayed as illustrated on the left.
4) Use [K / L] to select a title to be overwritten, then
press [OK].
5) Select the channel you want to record.
1 SP
(Refer to page 31 on how to select a channel.)
Recording
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
6) Press [REC I] again.
NOV/22/07 11:35AM CH13 EP
Overwriting recording starts.
NOV/22/07 0:10:33
EMPTY TITLE 7) Press [STOP C] to stop recording.

1:37:52 SP
This operation may take a

while to be completed.
Playback
5) Use [K / L] to select “Overwrite”, then press [OK].
Play
1 SP Note
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP • Recording mode of the overwriting title is the same
NOV/21/07 0:20:44
2
as that of the original (overwritten) title when
overwriting in the middle of the title.
6) Select the channel you want to record. • Title name will not be overwritten.
(Refer to page 31 on how to select a channel.)
Editing
e.g.) DVD+RW
selected title number
to be overwritten
1 1 0:01:00
+RW
CH 12
Function Setup
F I DVD DVD SP 2h00m
7) Press [REC I].

Overwriting recording starts.
The elapsed-time counter starts running.
Others
8) Press [STOP C] to stop recording.

Title name is also overwritten.
Note
Español
• The remaining recording time is displayed on the

bottom right corner of the TV screen during
overwriting.
EN 47
E2H00UD.indd 47 2007/05/11 10:15:34

SPECIAL RECORDING
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:

(overwriting from the beginning of the title)
overwrite 30 - 180 seconds will be cut off.

recording : A after
overwriting
existing title : B title name : A title name : B
When overwriting title is longer than the existing title:

(overwriting from the beginning of the title)
overwrite
recording : A after
overwriting
existing title : B
title name : A
overwrite
recording : A
30 - 180 seconds will be cut off.
after
existing title : B overwriting
title name : A title name : C
existing title : C
When overwriting in the middle of the title:
overwrite 30 - 180 seconds will be cut off.

recording : A after
overwriting
existing title : B
title name : B* title name : B
*Overwritten section and the rest of the sections will

have the same title name as the original existing
title (B).
Note
• When a title name is overwritten, its index picture is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title.
48 EN
E2H00UD.indd 48 2007/05/11 10:15:35

DUBBING
Introduction
Information on Dubbing
You can dub the contents of the HDD to DVD or vice verse. Before you start dubbing, refer to page 37 to see the
recording compatibility.
Guide to Dubbing Menu Display Recording Mode for Dubbing
Connections
“High”
1 HDD DVD
This unit is compatible with the high speed dubbing from

3000 MB 3 HDD to DVD.
Dubbing List
Add High speed dubbing offers you the dubbing speed of 12
2 Delete All
times the SLP mode dubbing. To perform the high speed
Dubbing Start
4 dubbing, set the recording mode to “High”.
• Duration of high speed dubbing will vary depending on
5
Basic Setup
1/1 the recording mode or the title amount.
1 Dubbing direction • High speed dubbing is not available when;
2 Dubbing menu - recording mode is set to other than “High”.
3 Remaining recordable space - dubbing from a DVD to the HDD.
4 Dubbing list - there is not enough space in the disc.
5 Current page number / total number of pages - duration of the title is more than 5 hours.
• During dubbing (except for high speed dubbing), you
only can use [STOP C] on the front panel, and any other
Recording
buttons will be invalid.
“Auto”
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available automatically.
• “Auto” is available only when dubbing from HDD to
Playback
DVD.
• The recording may be cut short when the available
recording space of the disc is too limited.
Note on dubbing
• During normal dubbing, you can watch the playback
picture of the title being dubbed (the audio cannot
Editing
be changed). During high speed dubbing, however,
the playback picture will not appear.
• Dubbing of a “copy-once only” program is not
possible with this unit.
• If you stop the dubbing halfway, the contents will be
dubbed up to the point where you stop the dubbing
Function Setup
(except for the high speed dubbing). With high
speed dubbing, nothing will be dubbed if you stop it
halfway.
• To stop the dubbing in progress, press [STOP C] on
the front panel.
Other modes
Refer to page 38 for the information on other modes.
Others
Español
EN 49
E2H00UD.indd 49 2007/05/11 10:15:36

DUBBING
Settings for an External Device
Connect the external device properly to the unit by using input jacks either E2 (Front) or E1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front).
Use S-video or the RCA audio/video cables for this connection.
or
S-VIDEO VIDEO AUDIO OUT VIDEO AUDIO OUT S-VIDEO
OUT OUT R L OUT R L OUT
external device
(camcorder, VCR etc.)
S-video or RCA RCA RCA RCA S-video

cable video audio video audio cable
cable cable cable cable
or
Y
VIDEO VIDEO
IN OUT
PB/CB
L L
or
R IN R PR/CR OUT
AUDIO IN COMPONENT
(E1
L1) S-VIDEO AUDIO OUT VIDEO OUT S-VIDEO
E2
E1
to E2 IN to E1 IN
VIDEO VIDEO Y
IN OUT
IN
PB/CB
L L
OUT
R IN R OUT
PR/CR COAXIAL
ANTENNA (E1) S-VIDEO AUDIO OUT VIDEO OUT S-VIDEO PCM/BITSTREAM
front of this unit rear of this unit
1
• RCA video cable x 1 [OK].
Please purchase the rest of the necessary cables at your “General Setting” menu will appear.
local store.
2
Use [K / L] to select “Video”, then
press [OK].
STANDBY-ON
Submenu will appear.
3
Use [K / L] to select “Video Input”,
A
.@/: ABC DEF
then press [OK].
1 2 3
GHI JKL MNO
4
4 5 6 Use [K / L] to select desired external
PQRS TUV WXYZ input, then press [OK].
7 8 9
SPACE CLEAR
Video Input
. 0 E1 (Rear)
SETUP
E2 (Front)
DISC MENU
5
Use [K / L] to select the input jack
s OK B
type to connect, then press [OK].
TITLE RETURN
If you want to use VIDEO IN jack, select “Video In”.
p
If you want to use S-VIDEO IN jack, select
j B i “S-Video In”.
E1 (Rear)
F h g C
Video In
CHANNEL S-Video In
-- +
6
AUDIO HDD DVD TIMER Press [SETUP] to exit.
50 EN
E2H00UD.indd 50 2007/05/11 10:15:36

DUBBING
Introduction
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 50. If you are recording to the HDD, press [HDD] first, then
proceed to step 2.
If you are recording to a disc, press [DVD] first.
STANDBY-ON
Connections
1
Insert a recordable disc (refer to page
A
.@/: ABC DEF
It takes a while to load the disc.
1 2 3
GHI JKL MNO
2
4 5 6 Select the appropriate external input
Basic Setup
PQRS TUV WXYZ
channel (E1 or E2) by pressing
7 8 9
SPACE CLEAR
[SOURCE] or [CHANNEL / ].
. 0
• If the external device is connected to the rear
of this unit, select E1.
DISC MENU SETUP
o • If the external device is connected to the front

of this unit, select E2.
s OK B • You can also select E1 or E2 channel by using [the
Recording
TITLE RETURN
Number buttons].
p e.g.) For E1, press [0], [0], [1].
3
j B i
Press [REC MODE] to select a
F h g C recording mode.
CHANNEL Refer to “Recording Mode” on page 38.
-- +
Playback
4
AUDIO HDD DVD TIMER Press [RECORD I] on the unit to start
recording.
I
5
Start playback on the external device
to record from.
6 Editing
Press [STOP C] on the unit to stop
recording.
Function Setup
1 1 6 4
Others
Español
EN 51
E2H00UD.indd 51 2007/05/11 10:15:37

DUBBING
Selected Title Dubbing
Preparing for dubbing (HDD to DVD):

• Insert a recordable DVD.
Preparing for dubbing (DVD to HDD):
• Insert a disc to be dubbed.
1
STANDBY-ON Press [SETUP] in stop mode.

A
2
.@/: ABC DEF
Use [K / L] to select “Dubbing”, then
1 2 3
GHI JKL MNO
press [OK].
4 5 6 Setup
PQRS TUV WXYZ
General Setting
7 8 9 Timer Programming
SPACE CLEAR Title List
. 0 Disc Edit
HDD Menu
DISC MENU SETUP
Dubbing
o
s OK B
TITLE RETURN
3
p
HDD to DVD
j B i
Use [K / L] to select “HDD DVD”,
CHANNEL
DVD to HDD
-- +
AUDIO HDD DVD TIMER

Use [K / L] to select “DVD HDD”,
then press [OK].
REC REPEAT REC MODE D.DUBBING e.g.) HDD ➔ DVD
I
Dubbing
HDD DVD
DVD HDD

4
Use [K / L] to select “Add”, then
press [OK].
HDD DVD
3000 MB
Dubbing List
Add
Delete All
Dubbing Start
1/1
• If you have registered any dubbing before,

they will be listed in the dubbing title list.
52 EN
E2H00UD.indd 52 2007/05/11 10:15:39

DUBBING
Introduction
5 8
Use [K / L / s / B] to select a desired Use [s / B] to select a desired
title, then press [OK]. recording mode, then press [OK].
e.g.) HDD HDD DVD
Title List
ABCDE
12:00AM (10:00:00) JAN/ 1/07 CH10 SP Please select REC MODE.
Connections
High HQ SP SPP LP EP SLP Auto
1 2 3
Dubbing Titles 500 MB
3000 MB
4 5 6
1/6
Confirmation message will appear.
The title is now registered in the dubbing list. • Depending on the dubbing direction, the
Basic Setup
available recording mode varies.
• When dubbing from HDD to DVD, you can
6
Repeat steps 4 to 5 until you register
select “High” to perform the high speed
all the titles to be dubbed. dubbing (refer to “Recording Mode for
Dubbing” on page 49 for more details).
To delete a title:
9
1 Go to the dubbing list, then use [K / L] to Use [K / L] to select “Yes”, then press
select a title. Then press [OK]. [OK].
Recording
2 Use [K / L] to select “Delete”, then press
[OK]. Start Dubbing?
3 Use [K / L] to select “Yes”, then press [OK]. Yes
To move a title: No
1 Go to the dubbing list, then use [K / L] to Dubbing will start.
select a title. Then press [OK].
2 Use [K / L] to select “Move”, then press [OK]. • It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Playback
3 Use [K / L] to select a desired insert point,
then press [OK]. Press [STOP C] on the front panel.
To erase all the titles in the dubbing title list:
1 Use [K / L] to select “Delete All” in the One-touch Dubbing...
dubbing menu, then press [OK].
2 Use [K / L] to select “Yes”, then press [OK]. With one-touch dubbing, you can start dubbing right
Final confirmation message will appear. away with just one touch.
3 Use [K / L] to select “Yes”, then press [OK]. To dub the contents in a DVD which is finalized on
Editing
other unit, use this function.
During playback of the title you want to dub, press
• To go back and forth between dubbing menu [D.DUBBING].
and dubbing list, use [s / B].
If you are playing back a DVD, DVD to HDD dubbing will
start right away.
If you are playing back HDD, HDD to DVD dubbing will
Function Setup
7
After adding all the titles you want, start right away.
use [K / L] to select “Dubbing Start” • The dubbing will start from the beginning of the title
in the dubbing menu, then press being played back.
• The unit will dub only the title being played back.
[OK].
• When dubbing from HDD to DVD, recording mode will
automatically be set to “High” whenever the conditions
are met (refer to page 49). Otherwise, the last selected
recording mode will automatically be applied.
To stop the dubbing in progress:
Others
Press [STOP C] on the front panel.

Español
EN 53
E2H00UD.indd 53 2007/05/11 10:15:40

DUBBING
One Title Dubbing (HDD to DVD only)
This function lets you select one specific title from the
title list for dubbing. Preparing for dubbing:
• Insert a recordable DVD.
Press [HDD] first.
1
Press [TITLE].
STANDBY-ON
2
Use [K / L / s / B] to select a desired
A title to dub, then press [OK].
.@/: ABC DEF
1 2 3
3
GHI JKL MNO
Use [K / L] to select “Dubbing”, then
4 5 6
PQRS TUV WXYZ
press [OK].
7 8 9 Resume Playback
SPACE CLEAR Play From Start
. 0 Edit
DISC MENU SETUP Title Delete
o Delete Multiple Titles
Dubbing
s OK B
TITLE RETURN
4
p Use [K / L] to select “Yes”, then press
[OK].
j B i
Start Dubbing?
F h g C Yes
CHANNEL
No
-- +
Dubbing of the selected title will start.
AUDIO HDD DVD TIMER To stop the dubbing in progress:
Press [STOP C] on the front panel.
I

54 EN
E2H00UD.indd 54 2007/05/11 10:15:40

PROTECTING A DISC
Introduction
To prevent accidental recording, editing or erasing the
titles, you can protect them from “Disc Edit” menu.
1
Press [SETUP].
STANDBY-ON
2
Use [K / L] to select “Disc Edit”, then
Connections
press [OK].
A
.@/: ABC DEF
3
1 2 3 Use [K / L] to select “Disc Protect
GHI JKL MNO
OFF ON”, then press [OK].
4 5 6
PQRS TUV WXYZ
e.g.) DVD+RW
Basic Setup
7 8 9 Disc Edit
SPACE CLEAR Edit Disc Name

. 0 Erase Disc
Make Edits Compatible
Disc Protect OFF ON
DISC MENU SETUP
s OK B
TITLE RETURN
Recording
p
4
j B i
Use [K / L] to select “Yes”, then press
F h g C [OK].
CHANNEL
-- + Protect this disc?
Yes
Playback
AUDIO HDD DVD TIMER
No
Disc is now protected.
I
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT This operation may take a
Editing
Function Setup
Note
To cancel the disc protection:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON” at step 3.
Others
Disc Edit
Edit Disc Name

Erase Disc
Disc Protect ON OFF
Español
To release the protect for the disc, select “Yes” at step 4.
EN 55
E2H00UD.indd 55 2007/05/11 10:15:41

PLAYING THE DISCS ON OTHER DVD PLAYERS
Finalizing a Disc
1
Press [SETUP].
You will need to finalize DVD+R, DVD-RW or DVD-R to
play them back on other DVD players.
Finalizing may take several minutes up to an hour.
2
A shorter recording period on the disc will require a Use [K / L] to select “Disc Edit”, then
longer time period for finalization. Do not unplug the
power cord during finalization.
press [OK].
“Disc Edit” menu will appear.
3
STANDBY-ON
Use [K / L] to select “Finalize”, then
press [OK].
A
.@/: ABC DEF
4
1 2 3 Use [K / L] to select “Yes”, then press
GHI JKL MNO [OK].
4 5 6 e.g.) DVD+R, DVD-R
PQRS TUV WXYZ
7 8 9 Finalize disc?
SPACE CLEAR
Yes
. 0 No
DISC MENU SETUP
o Finalizing will start.
s OK B Finalizing 90%
TITLE RETURN
p
To cancel finalizing...
j B i
(DVD-RW only)
F h g C
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [K / L], then press [OK]. Finalizing is
CHANNEL
canceled and the unit will be in stop mode.
-- +
AUDIO HDD DVD TIMER
Do you want to cancel ?

I Yes
No
Finalizing 5%
• If appears when pressing [STOP C], you cannot

cancel finalizing because the finalizing has been in
certain progress.
Note
• When selecting “No” and press [OK] or [RETURN],
• Once you have finalized a DVD+R/ DVD-R, you
finalizing will be continued.
cannot edit or record anything on that disc.
• You cannot cancel finalizing the DVD+R/DVD-R once
• There is no need to finalize DVD+RW.
it has started.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
5
Disc Protect ON OFF
Finalizing is completed.
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
* DO NOT power off during finalization, this will result
in malfunction.
56 EN
E2H00UD.indd 56 2007/05/11 10:15:42

PLAYING THE DISCS ON OTHER DVD PLAYERS
Introduction
Auto Finalizing
1
You can finalize discs automatically using this function. select “General Setting”, then press
You can use this function to finalize discs after finishing [OK].
all timer recordings and at the end of the disc space.
Connections
2
Use [K / L] to select “Recording”,
STANDBY-ON
then press [OK].
“Recording” menu will appear.
A
3
.@/: ABC DEF Use [K / L] to select “Auto Finalize”,
Basic Setup
1 2 3 then press [OK].
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
4
7 8 9 Use [K / L] to select “Disc Full” or
SPACE CLEAR “End of Timer Rec”, then press [OK].
. 0
Auto Finalize
DISC MENU SETUP
Recording
o Disc Full
End of Timer Rec
s OK B
5
TITLE
p
RETURN
Use [K / L] to select “ON”, then press
[OK].
j B i e.g.) “Disc Full”
Playback
F h g C Disc Full
CHANNEL ON
-- + OFF
AUDIO HDD DVD TIMER Your setting will be activated.
6
I
Editing
Function Setup

Others
Español
EN 57
E2H00UD.indd 57 2007/05/11 10:15:43

INFORMATION ON PLAYBACK
Before you play back DVD, read the following information.
Playable Discs and Files Unplayable Discs
This unit is compatible to play back the following discs. The following discs will not play back on this unit.
To play back a DVD, make sure that it meets the • CD-ROM • Compact Disc-Interactive (CD-I)
requirements for region codes and color systems as • DVD-RAM • Video Single Disc (VSD)
described below. You can play back discs that have the • DVD-ROM • DVD-audio
following logos will play back on the unit. Other disc • Unfinalized disc
types are not guaranteed to play back.
• DVD contains MP3/JPEG and DVD or CD contains
Windows Media™ Audio/DivX® files
Playable discs Logos
• DVD-R or DVD-RW recorded in VR mode or non
compatible recording format
DVD-video
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
DVD+RW layer cannot be heard.
Color Systems
DVD+R DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
DVD-RW This unit uses NTSC, so DVD you play back must be
(Finalized video mode discs only) recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
DVD-R Region Codes

(Finalized video mode discs only)
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
CD-DA (audio CD) the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
video CD
play back the DVD in this unit.
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
CD-RW
CD-R
Playable files Media

CD-DA
MP3 CD-RW/-R
JPEG
is a trademark of DVD Format/Logo Licensing Corporation.
58 EN
E2H00UD.indd 58 2007/05/11 10:15:44

INFORMATION ON PLAYBACK
Introduction
PBC (playback control) for Video CD Hint for HDD / DVD Playback
You can select images or information on the menu The contents of HDD / DVD are generally divided into
screen by activating the PBC (playback control) function titles. Titles may be further subdivided into chapters.
of the video CD. DVD-video
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function. title 1 title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Ver.1.1 (without PBC function): You can enjoy playback
Connections
picture as well as music CD.
Ver.2.0 (with PBC function): While using a video CD with
PBC function, “PBC” appears on the TV screen.
audio CD, video CD
Note track 1 track 2 track 3 track 4 track 5
• PBC setting turns to “ON” when loading video CD
with PBC function, thus, even after setting PBC to
“OFF” and ejecting the video CD then reloading the
Basic Setup
video CD, this setting turns to “ON” automatically.
MP3, JPEG
• Some operations cannot be performed while PBC folder 1 folder 2
function is on. Cancel PBC function temporarily to
perform those operations by following the file 1 file 2 file 3 file 4 file 5
instruction below.
1) Press [SETUP].
Recording
2) Use [K / L] to select “CD Playback Mode”, then
press [OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then
press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Playback
You can play back interactive software using menu
screens. Refer to instructions in the video CD.
Editing
Function Setup
Others
Español
EN 59
E2H00UD.indd 59 2007/05/11 10:15:45

BASIC PLAYBACK
Direct Playback
If you are playing back the titles in HDD, press [HDD]

first, then proceed to step 2.
If you are playing back the titles in DVD, press [DVD] first.
1
STANDBY-ON
Insert a disc (refer to page 24 on how
to insert a disc).
A
.@/: ABC DEF
1 2 3
GHI JKL MNO
4 5 6 Align the disc to

PQRS TUV WXYZ the disc tray guide.
7 8 9
SPACE CLEAR * Make sure the disc is compatible with this unit.
. 0 (Refer to page 58 for the list of compatible discs.)
DISC MENU SETUP
o It may take a while to load

the disc.
s OK B
TITLE RETURN
2
p Press [PLAY B] to start playback.
If you are playing back a DVD-video or video CD
j B i with PBC function, a menu may appear.
Refer to “Using the Title / Disc Menu” on page
F h g C
64.
CHANNEL
-- +
3
Press [STOP C] once to stop playback
AUDIO HDD DVD TIMER
temporarily.
• Refer to “Resume Playback” on page 65.
I

Note
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 59).
60 EN
E2H00UD.indd 60 2007/05/11 10:15:45

BASIC PLAYBACK
Introduction
Playback from the Title List
If you are playing back the titles in HDD, press [HDD]

first, then proceed to step 2.
STANDBY-ON
If you are playing back the titles in DVD, press [DVD] first.
Connections
1
Insert a disc (refer to page 24 on how
A to insert a disc).
.@/: ABC DEF * Make sure the disc is compatible with this unit.
1 2 3 (Refer to page 58 for the list of compatible discs.)
GHI JKL MNO
4 5 6 It may take a while to load

the disc.
Basic Setup
PQRS TUV WXYZ
7 8 9
SPACE CLEAR
2
. 0 For HDD, press [TITLE] to call up the
DISC MENU SETUP title list. For DVD, the title list will
o automatically appear when you
s OK B
insert a disc. Otherwise, press [TITLE]
or [DISC MENU].
Recording
TITLE RETURN
p • To exit the title list, press [STOP C].
• To resume the title list, press [TITLE].
j B i
3
F h g C Use [K / L // s / B] to select a desired
CHANNEL title, then press [OK].
-- + <HDD title list>
Playback
AUDIO HDD DVD TIMER
Title List
JAN/ 1/07 12:00AM CH10 SP
REC REPEAT REC MODE D.DUBBING 12:00AM (1:00:00) JAN/ 1/07 CH10 SP
I 1 2 3
4 5 6
Editing
1/6
<DVD title list>
1 SP
NOV/21/07 11:00AM CH12 SP

NOV/21/07 0:20:44
Function Setup
2
NOV/22/07 11:35AM CH13 EP

NOV/22/07 0:10:33
EMPTY TITLE
1:37:52 SP
• For Video CD, when “PBC (Video CD only)” in

“CD playback Mode” menu is set to “ON”, the
video CD main menu will appear when
Others
inserting a disc. In such case, select a

numbered menu with [the Number buttons].
• Press [G] (for HDD) / [B] (for DVD) to display
the next page, and press [H] (for HDD) / [{]
(for DVD ) to display the previous page.
Note
Español
• Some discs may start playback automatically.

• You can also start playback by pressing [PLAY B]
instead of [OK] at step 3. Instructions continue on the next page.
EN 61
E2H00UD.indd 61 2007/05/11 10:15:46

BASIC PLAYBACK
Note for DVD title list
4
If you want to see disc information, press [{ ] when the Use [K / L] to select “Play” (for DVD),
first page of the title list is displayed or press [ K ] when or select “Resume Playback” or “Play
the first title is selected but not when “Play”, “Edit” or
“Overwrite” is highlighted.
from Start” (for HDD), then press [OK].
e.g.) DVD
e.g.) DVD+RW
Play 1 SP
Edit
NOV/21/07 11:00AM CH12 SP
Overwrite NOV/21/07 0:20:44
No Disc Name
2
Disc DVD+RW
NOV/22/07 11:35AM CH13 EP
Total Titles 3 NOV/22/07 0:10:33
Disc Space Used 0:30:48
3
Disc Protect OFF
Make Edits Compatible Needed EMPTY TITLE
1:37:52 SP
Playback will start.

e.g.) DVD+R
5
Press [STOP C] once to stop playback
No Disc Name temporarily.
Disc DVD+R
• Refer to “Resume Playback” on page 65.
Total Titles 5
Disc Space Used 1:30:48
Disc Protect OFF
Finalize Finalized
1. Disc name
(Default “No Disc Name”)
2. Disc type
(DVD+RW/DVD+R/ DVD-RW/DVD-R)
3. Total number of title
(include “EMPTY TITLE”)
4. Total time of recorded disc space
5. Status of disc protection
(“ON” is protected disc.)
6. Making edits compatible/finalize
• When DVD+RW is inserted:
If the disc needs to be set “Make Edits Compatible”,
“Needed” is displayed. Otherwise, “Not Needed” is
displayed. (Refer to page 91.)
• When DVD+R, DVD-RW or DVD-R is inserted:
If “Finalize” is done, “Finalized” is displayed.
Otherwise, “Unfinalized” is displayed.
62 EN
E2H00UD.indd 62 2007/05/11 10:15:48

BASIC PLAYBACK
Introduction
Playing Back an Audio CD and a CD-RW/-R with MP3 / JPEG Files
Press [DVD] first.
1
Insert a playable disc (refer to page
STANDBY-ON * Make sure the disc is compatible with this unit.
Connections
(Refer to page 58 for the list of compatible discs.)
It may take a while to load
A
the disc.
.@/: ABC DEF
1 2 3 When an audio CD is inserted, track list will

GHI JKL MNO appear.
4 5 6 When a CD-RW/-R with MP3/JPEG files is
PQRS TUV WXYZ inserted, file list will appear.
Basic Setup
7 8 9 • To exit the track/file list, press [STOP C].
SPACE CLEAR
• To resume the track/file list, press [TITLE].
. 0
DISC MENU SETUP
2
o Use [K / L] to select a desired folder
or track/file, then press [OK].
s OK B e.g.) Audio CD
Recording
TITLE RETURN
File List
p DISC NAME
A
j B i
B
1 JPEG file1
F h g C 2 JPEG file2
3 MP3 file1
CHANNEL 4 MP3 file2
5 MP3 file3
-- + 6 MP3 file4
Playback
AUDIO HDD DVD TIMER 1/ 2

When selecting track/file:
I Playback will start.
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT When selecting the folder (Not available for audio CD):
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK].
Editing
• Press [PLAY B], [OK] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.

Hints for audio CD tracks and MP3 / JPEG files:
Function Setup
• Folders are shown by .
• Audio CD tracks are shown by .
• MP3 files are shown by 3 .
• JPEG files are shown by .
• The system can recognize up to 255 folders, up to 99
tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “...”. Unrecognizable characters will
be replaced with asterisks.
Others
Note • If there are no files in the folder, “No Files” will be displayed.
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck. It is recommended that files to be played back in this
unit are recorded under the following specifications:
• Files whose extension is other than “.mp3(MP3)” or
“.jpg / .jpeg(JPEG)” will not be listed. <MP3>
• Some unplayable folders or files may be listed due to • Sampling frequency : 44.1 kHz or 48 kHz.
the recording status. • Constant bit rate : 112 kbps - 320 kbps
Español
• High-resolution JPEG files take longer to be displayed.

• Progressive JPEG files (JPEG files saved in progressive <JPEG>
format) cannot be played back on this unit. • Upper limit : 6,300 x 5,100 dots.
• Lower limit : 32 x 32 dots.
• File size of image maximum : 12 MB.
EN 63
E2H00UD.indd 63 2007/05/11 10:15:48

BASIC PLAYBACK
Playing Back an Audio CD and a CD- Using the Title / Disc Menu
RW/-R with MP3 / JPEG Files (cont’d)
Kodak Picture CD DVD or video CD with PBC function may contain a title
The Picture CD is a service to convert photographs taken list, which describes the contents of the disc, or a disc
by a conventional film camera into digital data and write menu, which guides you through the available functions
the data on a CD. You can enjoy picture images on the TV in the disc.
set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that Press [DVD] first.
provides developing service of Kodak Inc. 1) Insert a disc (refer to page 24 on how to insert a
1) Press [TITLE]. disc).
Picture CD
* Make sure the disc is compatible with this unit. (Refer
Image 1
to page 58 for the list of compatible discs.)
1 2 3 It may take a while to load the disc.
2) Press [TITLE] or [DISC MENU] to call up the title list
4 5 6 or disc menu.
3) Use [K / L / { / B] to make a selection, and then

1/2
press [OK] to enable your selection.
• To exit the Picture CD thumbnail List, press [TITLE]
again or press [STOP C]. 4) Press [STOP C] to exit.
Arrow icons mean the title list includes a next or
previous page. Use [{ / B] in the direction of the Note
icon you wish to follow. You can also quick review the • You can select a numbered menu with [the Number
six thumbnails at once between the first and last buttons] also.
pages by pressing [H / G].
• Menus vary among discs. Refer to the information
accompanying the disc for details.
2) Use [K / L / { / B] to select a desired track to be • [TITLE] or [DISC MENU] will not always be active
played back, then press [PLAY B] or [OK]. with all DVD.
An image will be played back from the selected track • For video CD, when “PBC (Video CD only)” in “CD
and go to the next one in turn. Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
3) Press [STOP C] to stop playback.
Notes on JPEG and Kodak Picture CD: Pause

• After track is displayed for 5 seconds or 10 seconds
(set in the “Slide Show” on page 69) the display 1) During playback, press [PAUSE F].
moves to the next track. Playback will be paused.
During JPEG or Kodak Picture CD playback, press [B]
or [{] to rotate a picture 90 degrees clockwise or
counterclockwise respectively.
(Not available when the display menu appears.)
2) Press [PLAY B] to return to the normal playback.
Note
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 99.)
64 EN
E2H00UD.indd 64 2007/05/11 10:15:50

SPECIAL PLAYBACK
Introduction
Resume Playback Note
• Forward/reverse speed will be indicated with icons
You can play back from where you stopped playing back as follows.
the disc last.
forward (approx. speed)
1) During playback, press [STOP C]. 2x:
The resume message will appear. 20x:
Connections
40x:
reverse (approx. speed)
Resume ON
5x:
20x:
2) Press [PLAY B]. 40x:
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
Basic Setup
the same point even if you turn off the unit (HDD/DVD Variable Skip / Variable Replay
only).
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped. During playback, you can skip forward or backward by
the amount of time you set in “Playback” menu. To set
For HDD: the time amount, refer to “ 8 Variable Skip / Replay” on
You can set a resume point per every title. page 99.
Recording
For DVD+RW/+R, DVD-RW/-R, Video CD, Audio CD,
MP3 files and JPEG files: During playback, press [V.SKIP] if you want to skip
forward. Press [V.REPLAY] if you want to skip
You can set only one resume point per disc.
backward.
Note
• For MP3/JPEG files, playback will resume from the Rapid Playback
beginning of the file at which playback was stopped.
Playback
• Some video CD with the PBC function resume
playback from the beginning of the track.
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Fast Forward / Fast Reverse Playback Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
Editing
1) During playback, press [RAPID PLAY].
1) During playback, press [D] or [E].
Every time you press [D] or [E], approximate speed B : Press [RAPID PLAY] once during playback.
will be changed as follows. Plays back approximately at 0.8 times of normal
playback.
Fast forward or fast reverse playback across titles (for
Function Setup
HDD/DVD) or files (for MP3) is not possible. B : Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
g g g normal g g g playback.
40x h
20x h
5x h
speed
playback h
2x h
20x h
40x B: Press [RAPID PLAY] 3 times to play back in
normal speed.
For video CD, approximate forward/reverse speeds are No effects.
2x, 8x, 16x.
For audio CD, MP3 files, approximate speed is fixed at 2) Press [PLAY B] to continue the normal playback.
8x with sound (indicated with / ).
Others
2) Press [PLAY B] to return to the normal playback. Note

• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
Español
LPCM sound (2 channel) will be output.
EN 65
E2H00UD.indd 65 2007/05/11 10:15:51

SPECIAL PLAYBACK
Step by Step Playback Time Shift Playback
You can play back a title being recorded from the

beginning while recording continues.
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted. 1) During recording, press [PLAY B].
2) Press [G] repeatedly. Playback of the title you are recording will start from
Playback will advance one frame (or step) at a time the beginning.
when you press [G] with the sound muted. • Elapsed playback time will be displayed in the front
To play back step by step backward: panel display.
Press [H] repeatedly. 2) To stop the playback, press [STOP C] once.
Every time you press the button, the playback will go • The front panel display will switch back to show the
backward by one frame. elapsed recording time.
• Press and hold [H] / [G] to reverse / advance
continuously. Note
3) Press [PLAY B] to continue the normal playback. • If you press [STOP C] twice, it will stop the
recording.
Note • You cannot use the OTR function during time shift
• Only step by step forward playback is available for playback.
playing back video CD.
Simultaneous Playback and Recording

Slow Forward / Slow Reverse Playback
With regard to HDD, you can continue recording a

program while playing back another title in the same
component (HDD).
1) During playback, press [PAUSE F]. Then press To do so, press [TITLE] during recording and select a title
[ D] or [ E]. you like to play back, and then press [PLAY B].
Every time you press [D] or [E], approximate speed (You can also start the playback from the title list menu.)
will be changed as follows. (The sound will remain
muted.) To playback a title being recorded while continuing
to record, refer to “Time shift playback” above
g g g g g g
(available only with HDD).
1/4x h 1/8x h 1/16x h
pause
h 1/16x h 1/8x h 1/3x
Note
To return to the normal playback, press [PLAY B].
• Video CD, audio CD, MP3/JPEG files recorded on a
disc can also be played back during HDD recording.
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
• Only slow forward is available when playing back
video CD.
66 EN
E2H00UD.indd 66 2007/05/11 10:15:53

SPECIAL PLAYBACK
Introduction
Zoom Marker Setting
1) During playback, press [DISPLAY]. This feature allows you to assign a specific point on a title
to be called back later.
Connections
2) Use [{ / B] to select , then press [OK] within 1
second or wait for 1 second to display the selection 1) During playback, press [DISPLAY].
menu.
e.g.) DVD-video 2) Use [{ / B] to select , then press [OK] within 1
second or wait for 1 second to display the marker
1/ 5 1/ 5 0:01:00 / 1:23:45 list.
DVD Video
e.g.) DVD-video
Basic Setup
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired zoom factor to zoom,

then press [OK].
1/ 5 1/ 5 0:01:00 / 1:23:45
3) Use [K / L] to select a desired marker number.
Recording
DVD Video
When it reaches the desired point, press [OK].
× 1.2
× 1.5
1/ 5 1/ 5 0:01:00 / 1:23:45
× 2.0
DVD Video
1 ---
2 ---
3 ---
Zoom menu will appear. 4 ---
5 ---
There are four options 6 ---
(x1.0, x1.2, x1.5 and x2.0), these are displayed
Playback
excluding the current zoom rate.
Zoom area will be displayed. The title (track) number and the time will be displayed.
4) Use [K / L / { / B] to select a desired zoom 4) To return to the marker later:

position, then press [OK]. Use [K / L] to select the desired marker number,
then press [OK].
Editing
Note
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
Function Setup
operations listed below.

– opening the disc tray (CD/DVD only)
Zoom playback will start. – turning off the power (CD/DVD only)
– make additional recording on the disc (DVD only)
Note – editing any title (DVD only)
• When selecting a smaller factor than the current one, – dividing the title (HDD only)
the zoom area will not be displayed. – deleting a scene of the title (HDD only)
• To exit the zoom menu, press [DISPLAY] again at • You can mark up to 6 points.
Others
step 1. • Marker setting is not available when you play back

• To cancel the zoom function, select “x1.0” using the video CD with PBC function.
[K / L], then press [OK].
• You cannot slide the zoomed picture on some JPEG
files.
Español
EN 67
E2H00UD.indd 67 2007/05/11 10:15:55

SPECIAL PLAYBACK
Repeat Playback Note
• Point B for the repeat A-B playback should be set
Available repeat function may vary depending the discs. within the same title or track as point A.
1) During playback press [DISPLAY], then proceed to • To cancel the repeat playback, select “OFF” at step 3.
step 2), or press [REPEAT] then proceed to step 3). The repeat setting will also be canceled when you
stop playback.
2) Use [{ / B] to select , then press [OK] within 1 • You cannot select “Group” during the random
second or wait for 1 second to display the selection playback.
menu. • Repeat playback is not available when you play back
1/ 5 1/ 5 0:01:00 / 1:23:45 the video CD with PBC function.
DVD Video
Random Playback
3) Use [K / L] to select a desired repeat type, then
press [OK].
e.g.) HDD/DVD-video You can play back a disc randomly instead of playing
1/ 5 1/ 5 0:01:00 / 1:23:45 back in the original order.
DVD Video
OFF
1) Press [SETUP].
Title
Chapter 2) Use [K / L] to select “CD Playback Mode”, then press
A–B
[OK].
e.g.) audio CD, video CD “CD Playback Mode” menu will appear.
1/ 5 0:00:15 / 0:05:00 3) Use [K / L] to select “Random Play”, then press
CD [OK].
OFF
Track
Random playback will start.
All
A–B
Note
e.g.) MP3/JPEG files • To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the TV
1/ 5 0:00:15
MP3
screen.
OFF • For video CD with PBC function, the PBC setting will
Track
All be switched to off automatically when you start
Group
random playback.
The selected repeat playback will start.
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD
Repeat
Title
Title (HDD/DVD only):

The current title will be played back repeatedly.
Chapter (HDD/DVD only):
The current chapter will be played back repeatedly.
All (DVD/audio CD/video CD without PBC function/
CD with MP3, JPEG):
All titles in the media will be played back repeatedly.
A-B (HDD/DVD/audio CD/video CD without PBC
function only):
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track (audio CD/video CD without PBC function/
MP3 or JPEG files only):
The current track or file will be played back repeatedly.
Group (MP3/JPEG files only):
The current folder will be played back repeatedly.
68 EN
E2H00UD.indd 68 2007/05/11 10:15:57

SPECIAL PLAYBACK
Introduction
Program Playback Slide Show
You can program the disc to play back in your desired You can select the display time between 5 seconds and
order. 10 seconds.
Connections
1) Press [SETUP]. 1) Follow steps 1 and 2 in “Random Playback” on page
68.
2) Use [K / L] to select “CD Playback Mode”, then press
[OK]. 2) Use [K / L] to select “Slide Show”, then press [OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select the display time, then press
3) Use [K / L] to select “Program Play”, then press [OK].
Basic Setup
[OK].
4) Press [SETUP] to exit.
4) Use [K / L] to select a desired track, then press [OK]
or [B].
CD Playback Mode
Note
Program Play • Large-size JPEG files take a few moments to be
displayed.
Recording
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Total 0:00:00
Repeat this step until you program all the desired

tracks.
Playback
5) Press [PLAY B].
CD Playback Mode
Program Play
09 04 10 06 -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Editing
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Total 0:31:07
Program playback will start. Function Setup
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• Program information will be retained until you power
off the unit or open the disc tray.
Others
• You may also select a desired track using [the

Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
program playback.
Español
EN 69
E2H00UD.indd 69 2007/05/11 10:15:58

SEARCH
Title / Chapter Search Track Search
Using [H] / [G] Using [H] / [G]

1) During playback, press [G] to skip the current 1) During playback, press [G] to skip the current
title or chapter and move to the next. track/file and move to the next.
The title or chapter will move forward by one at a time. The track/file will move forward one at a time.
• If there is no chapter in one title, the current title will To go back to the beginning of the current track/file,
be skipped. press [H].
Press it repeatedly to go to the previous track/file. The
To go back to the beginning of the current title or track/file will move backward one at a time.
chapter, press [H].
Press it repeatedly to go to the previous title or Using [DISPLAY]
chapter. The title or chapter will move backward one
at a time. 1) During playback, press [DISPLAY].
Note 2) Use [{ / B] to select , then press [OK].

• With regard to HDD, chapter search using [H] / e.g.) audio CD
[G] is available only within the same title. 1/ 5 0:00:15 / 0:05:00
CD
Using [DISPLAY]
1) During playback, press [DISPLAY].
e.g.) MP3 files
2) Use [{ / B] to select , then press [OK]. 1/ 5 0:00:15
e.g.) DVD-video MP3
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
The number next to will be highlighted.
3) Use [K / L] or [the Number buttons] to enter a

The number next to will be highlighted. desired track/file number to search, then press
[OK].
3) Title: After the search, playback will start automatically.
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [OK].
Title search will start.
Note
Chapter:
• During CD playback you can enter a track number
Press [B] to move to the number next to for directly using [the Number buttons] for track search
chapter. without displaying the menu.
Use [K / L] or [the Number buttons] to enter a • Track search is not available when you play back the
desired chapter number to search, then press [OK]. video CD with PBC function.
After the search, playback will start automatically.
Note
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
total number total time

of titles of the title
total number
of chapters
70 EN
E2H00UD.indd 70 2007/05/11 10:15:58

SEARCH
Introduction
Time Search
Connections
2) Use [{ / B] to select , then press [OK].
e.g.) DVD-video
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
Basic Setup
e.g.) audio CD
1/ 5 0:00:15 / 0:05:00
CD
The number next to will be highlighted.
Recording
To move to the number next to , press [B].
When time search is not available, and time
counter are not displayed.
3) Use [K / L / { / B] or [the Number buttons] to

enter a desired time to search, then press [OK].
After the search, playback will start automatically.
Playback
Note
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
Editing
Function Setup
Others
Español
EN 71
E2H00UD.indd 71 2007/05/11 10:16:00

SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles Switching Audio Soundtrack
DVD-video may have subtitles in 1 or more languages. When playing back a DVD-video recorded with 2 or more
Available subtitle languages can be found on the disc soundtracks (these are often in different languages), you
case. You can switch subtitle languages anytime during can switch them during playback. When playing back
playback. video CD, audio CD you can switch “L/R”(stereo), “L”(left)
or “R”(right).
1) During playback press [DISPLAY], then proceed to
2) Use [{ / B] to select , then press [OK] within 1 step 2), or press [AUDIO] then proceed to step 3).
second or wait for 1 second to display the selection
menu. 2) Use [{ / B] to select , then press [OK] within 1
e.g.) DVD-video
menu.
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video 3) Use [K / L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
3) Use [K / L] to select a desired subtitle language, 1/ 5 1/ 5 0:01:00 / 1:23:45
then press [OK]. DVD Video
1.Dolby Digital 5.1ch English

1/ 5 1/ 5 0:01:00 / 1:23:45 2.Dolby Digital 2ch English
DVD Video
OFF
1.English
• If the title contains both main and sub audio, you can
further select “L” (main), “R” (sub), or “L/R” (mixed of
main and sub).
Subtitle will be displayed in the selected language.
For audio CD, video CD
When selecting “OFF”, subtitle will disappear.
• Audio channel will switch.
e.g.) audio CD
Note 1/ 5 0:00:15 / 0:05:00
• Some discs will only allow you to change the subtitle CD
from the disc menu. Press [TITLE] or [DISC MENU] to 1. L/R

2. L
display the disc menu. 3. R
• If a 4-digit language code appears in the subtitle

menu, refer to the “LANGUAGE CODE” on page 109.
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
72 EN
E2H00UD.indd 72 2007/05/11 10:16:01

SELECTING THE FORMAT OF AUDIO AND VIDEO
Introduction
Switching Virtual Surround System Switching Camera Angles
Some DVD-video have scenes shot from 2 or more

angles. Angle information should be on the disc case if
You can enjoy stereophonic virtual space through your the disc contains multi-angle scenes.
existing 2 channel stereo system.
Connections
2) Use [{ / B] to select , then press [OK].
2) Use [{ / B] to select , then press [OK] within 1 e.g.) DVD-video
menu. 1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
e.g.) DVD-video
Basic Setup
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”,

then press [OK]. Angle icon appears when a switching camera angle is
e.g.) DVD-video available.
Recording
Angle will switch each time you press [OK].
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Note
Type 2 • Angle icon does not appear on the TV screen in a
case you set “Angle Icon” to “OFF” in “Playback”
OFF : no effect menu. Refer to page 99.
Type 1 : natural effect
Playback
Type 2 : emphasized effect
Reducing Block Noise
Note
• Select “OFF” in a case sound is distorted.
• The setting will be kept even when the unit is turned
off. This function reduces noise in the playback picture.
Editing
2) Use [{ / B] to select , then press [OK] within 1
menu.
e.g.) DVD-video
Function Setup
1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired option, then press

[OK]. 1/ 5 1/ 5 0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Others

OFF : When playing back titles with a few noises
such as DVD-video.
Type 1 : For the titles recorded in long time mode
such as SLP mode.
Type 2 : Same as type 1, only more effective.
Español
EN 73
E2H00UD.indd 73 2007/05/11 10:16:02

INFORMATION ON EDITING
Guide to a Title List
Title list allows you to check the titles recorded on the HDD or the disc easily. You can choose a title to play back from
this list and easily edit the titles as you prefer.
Press [HDD], then press [TITLE]. Press [DVD], then press [TITLE].
HDD mode DVD mode

2 1 6 7 8 9
Title List
JAN/ 1/07 12:00AM CH10 SP 1 SP
12:00AM (1:00:00) JAN/ 1/07 CH10 SP
NOV/21/07 11:00AM CH12 SP
1 2 3 NOV/21/07 0:20:44
Play
2
Edit
NOV/22/07 11:35AM CH13 EP
4 5 6
3
EMPTY TITLE
1:37:52 SP
1/6
3 4 5 4 11 7 10
e.g.) DVD
+VR Edit
2 Title Delete
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
NOV/22/07 11:35AM CH13 EP

0:00:59
16 15 14 13 12
1. Title name (editable): Recording date, time, channel 9. Recording mode: Currently selected recording mode
and the recording mode will be assigned is displayed here.
automatically as the title name until you edit it. 10. Capacity indicator: Indicating the position and the
2. Title information: Time at which the recording of amount of each title in the disc. The portion for the
the title was started, duration of the title, date selected title is highlighted.
recorded, channel recorded, and the recording mode • It may not indicate the precise capacity of the disc.
in which the title was recorded. • If the duration of a title is too short, it may not be
3. Title List: List of titles recorded on the HDD. Each reflected in the capacity indicator.
title is indicated by its index picture. Following icons 11. Index pictures: A cut from the recorded content is
may be displayed on the index picture. displayed here.
: Indicating the title has never been played back 12. Submenu: Submenus for the selected menu are
yet. displayed here.
: Indicating the title is protected. 13. Title name (editable): If you do not name the title,
: Indicating the title is a copy-protected title. the recorded date, time, channel, and the recording
I : If you call up the title list while recording, “I” mode are displayed here.
will be displayed on the index picture of the 14. Progress bar: Indicating the progress of the
title currently being recorded. playback.
4. Arrow: Indicating there is a previous / next page. 15. Preview window: Preview of the selected title is
5. Title list page number: Current page / total pages. displayed here.
6. Title list: List of the titles recorded on the disc, and 16. Playback status: Indicating the current playback
their information. status of the selected title.
7. Arrow: Indicating there is a previous / next page. Press [STOP C] to exit the title list.
8. Title information: On the first line, title name
(editable) is displayed. On the second line, the length
of the title is displayed.
Empty title: The portion of the disc where there is no
recordings are made. As for the empty title, available
recording time by the selected recording mode is
displayed on the second line.
74 EN
E2H00UD.indd 74 2007/05/11 10:16:04

INFORMATION ON EDITING
Introduction
Edit Menu
Media
HDD DVD
Available Futures
Putting names on titles ✔ ✔
Deleting a title ✔ ✔
Connections
Deleting selected titles ✔
Deleting a scene of a title ✔
Adding / deleting chapter marks ✔ ✔
Hiding chapters ✔
Protecting a title ✔
Dividing a title ✔ ✔ *1
Basic Setup
Setting an index picture ✔
Finalizing a disc ✔
Making edits compatible ✔ *2 Note
Putting name on disc ✔ • Once you have finalized a DVD+R/ DVD-R, you
Setting or Releasing disc protect ✔ cannot edit or record anything on that disc.
Recording
✔ : Available : Not available *1 : -RW/+RW discs only *2 : +RW discs only
How to Access the Edit Menu

HDD DVD
Press [HDD] first. Press [DVD] first.
Playback
1) Press [TITLE]. 1) Press [TITLE].
2) Use [K / L / { / B] to select a desired title, then 2) Use [K / L] to select a desired title, then press [OK].
press [OK].
1 SP
Title List
NOV/21/07 11:00AM CH12 SP
JAN/ 1/07 12:00AM CH10 SP NOV/21/07 0:20:44
12:00AM (1:00:00) JAN/ 1/07 CH10 SP
2
1 2 3
NOV/22/07 11:35AM CH13 EP
Editing
NOV/22/07 0:10:33
3
4 5 6
EMPTY TITLE
1:37:52 SP
1/6
3) Use [K / L] to select “Edit”, then press [OK].

Function Setup
3) Use [K / L] to select “Edit”, then press [OK].

1 SP
Play
Resume Playback Edit
NOV/21/07 11:00AM CH12 SP
Overwrite
Play From Start NOV/21/07 0:20:44
2
Edit
NOV/22/07 11:35AM CH13 EP
Title Delete NOV/22/07 0:10:33
Delete Multiple Titles 3
Dubbing EMPTY TITLE

1:37:52 SP
Others
Edit
1 Scene Delete +VR Edit

Edit Title Name
Chapter Mark
1 Title Delete
Title Dividing
Edit Title Name
Protect
Español
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
JAN/ 1/07 12:00AM CH10 LP
0:02:59
NOV/21/07 11:00AM CH12 SP
0:00:59
EN 75
E2H00UD.indd 75 2007/05/11 10:16:05

EDITING
Deleting a Title
You can delete a title which you do not need anymore.
Please be advised that the title once deleted cannot be If you are editing the titles on HDD, press [HDD] first.
brought back. If you are editing the titles on DVD, press [DVD] first.
1
Press [TITLE].
STANDBY-ON
2
A Use [K / L / { / B] to select a desired
.@/: ABC DEF title to delete, then press [OK].
1 2 3 If you are editing the titles on HDD, proceed to step 4.
GHI JKL MNO
If you are editing the titles on DVD, proceed to step 3.
4 5 6 HDD mode
PQRS TUV WXYZ
7 8 9 Title List
SPACE CLEAR Title 1

12:00AM (1:00:00) JAN/ 1/07 CH10 SP
. 0 1 2 3
DISC MENU SETUP
o
4 5 6
s OK B
TITLE RETURN 1/1
p
DVD mode
j B i
1 SP
F h g C
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
CHANNEL
2
-- +
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
AUDIO HDD DVD TIMER
3
EMPTY TITLE
REC REPEAT REC MODE D.DUBBING 1:37:52 SP
3
Use [K / L] to select “Edit”, then
press [OK].
1 SP
Play
Edit
NOV/21/07 11:00AM CH12 SP
NOV/22/07 11:35AM CH13 EP

NOV/22/07 0:10:33
EMPTY TITLE
1:37:52 SP
Note
• For DVD+RW/DVD-RW, the available disc space will
increase only when the last recorded title in the title
list is deleted. For DVD+R/DVD-R, the disc space will
not be affected.
• Deleted part of the titles in the capacity indicator
changes in color.
• As for DVD+RW/DVD-RW if you delete the title, deleted
title will be displayed as “EMPTY TITLE”.
• For DVD, it may take a while to write the data to the
disc after you press [OK] at step 5.
76 EN
E2H00UD.indd 76 2007/05/11 10:16:06

EDITING
Introduction
4 5
Use [K / L] to select “Title Delete”, Use [K / L] to select “Yes”, then press
then press [OK]. [OK].
HDD mode Final confirmation message will appear. Select
“Yes”, then press [OK].
Resume Playback
Play From Start
Edit The title is now deleted.
Connections
Title Delete Title List
Delete Multiple Titles JAN/ 1/07 12:00AM CH10 SP
12:00AM (1:00:00) JAN/ 1/07 CH10 SP
Dubbing
1 2 3
DVD mode
+VR Edit 4 5
1 Title Delete
Edit Title Name
Basic Setup
Chapter Mark 1/1
Hide Chapter
Index Picture
Title Dividing
1 SP
EMPTY TITLE
NOV/21/07 11:00AM CH12 SP 0:21:14 SP
0:00:59 2
NOV/22/07 11:35AM CH13 EP

Confirmation message will appear. NOV/22/07 0:10:33
Recording
EMPTY TITLE
1:37:52 SP
Playback
Editing
Function Setup
Others
Español
EN 77
E2H00UD.indd 77 2007/05/11 10:16:06

EDITING
Deleting Selected Titles
3
Use [K / L] to select “Delete Multiple
You can delete titles which you do not need anymore. Titles”, then press [OK].
Please be advised that the titles once deleted cannot be
Resume Playback
brought back.
Play From Start
Edit
Title Delete
STANDBY-ON
Delete Multiple Titles
Dubbing
A
4
.@/: ABC DEF Use [K / L / { / B] to select the title
1 2 3 you want to delete, then press [OK].
GHI JKL MNO
Title List
4 5 6
Title 1
PQRS TUV WXYZ 12:00AM (1:00:00) JAN/ 1/07 CH10 SP
7 8 9 1 2 3
SPACE CLEAR
. 0 4 5 6
DISC MENU SETUP
o
1/1
s OK B
Trash mark will appear indicating the title is
TITLE RETURN
marked for deletion.
p
5
j B i Repeat step 4 until you select all the
F h g C
titles you want to delete.
CHANNEL Title List
-- + Title 1
12:00AM (1:00:00) JAN/ 1/07 CH10 SP
AUDIO HDD DVD TIMER 1 2 3

4 5 6
I
1/1
6
Press [CLEAR].
Confirmation message will appear.
7
[OK].
1
Press [HDD], then press [TITLE].
Final confirmation message will appear. Select
Titles are now deleted.
2
Use [K / L / { / B] to select any title, Title List
Title 1
then press [OK]. 12:00AM (1:00:00) JAN/ 1/07 CH10 SP
1 2 3
Title List
Title 1
12:00AM (1:00:00) JAN/ 1/07 CH10 SP
4
1 2 3
1/1
4 5 6
To remove the trash mark from the title:

1/1 Select the title with the trash mark, then press
[OK].
78 EN
E2H00UD.indd 78 2007/05/11 10:16:07

EDITING
Introduction
Putting Names on Titles
You can put title names on the titles and change the
4
names from this menu.
[OK].
+VR Edit - Edit Title Name
STANDBY-ON
Connections
1 Yes
No
A
.@/: ABC DEF
1 2 3
MY FAVORITE
GHI JKL MNO
0:00:59
4 5 6
PQRS TUV WXYZ
The title name is now updated.
Basic Setup
7 8 9
SPACE CLEAR
5
. 0
Press [RETURN] once or repeatedly to
DISC MENU SETUP go back to the title list.
o For DVD, the data will be written onto the disc
momentarily.
s OK B
TITLE RETURN
Recording
p
j B i
Guide to Edit Title Name
F h g C 1) Use [K / L] to select a desired character set, then
press [OK].
2) Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
Playback
When you finish entering a title name, press [OK].
1
Follow steps in “How to Access the Select
Edit Menu” on page 75 to display Press
ABC abc 123 @!?
“Edit” menu. 0 <space> <space> 0 <space>
! ”# $ % & ’( )
2
Use [K / L] to select “Edit Title 1 (*1) (*1) 1 *+,-./:;<=>
Name”, then press [OK].
Editing
?@[]^_{|}
e.g.) DVD 2 ABC abc 2 (*2)
+VR Edit 3 DEF def 3 (*2)
1 Title Delete 4 GHI ghi 4 (*2)
Edit Title Name
Chapter Mark
5 JKL jkl 5 (*2)
Function Setup
Hide Chapter
Index Picture
6 MNO mno 6 (*2)
7
Title Dividing
PQRS pqrs 7 (*2)
NOV/21/07 11:00AM CH12 SP 8 TUV tuv 8 (*2)
0:00:59
9 WXYZ wxyz 9 (*2)
*1 Press 1 , character set will be changed to the “ @!? ”
3
To enter a title name, follow the mode automatically.
steps of “Guide to Edit Title Name” *2 Press 2 to 9 , character set will be changed to the
Others
on this page. previous input mode automatically.

• To delete letters, press [CLEAR] repeatedly.
Edit - Edit Title Name
+VR
Holding [CLEAR] will delete all letters.
1 A B C • Use [s / B] to move the cursor to the left and right.
a b c character set
1 2 3
• You can enter up to 30 letters.
@ ! ?
Note
Español
M
• Undefined letters in a title name are shown by “*”. If
0:00:59
you delete them, adjoining letters may change to “*”
or other.
area for entering title names
EN 79
E2H00UD.indd 79 2007/05/11 10:16:08

EDITING
Chapter Marks (Add)
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
To add a chapter mark:
1
STANDBY-ON Follow steps in “How to Access the
Edit Menu” on page 75 to display
SOURCE DTV/TV DISPLAY OPEN/CLOSE “Edit” menu.
A
2
.@/: ABC DEF
1 2 3
Use [K / L] to select “Chapter Mark”,
GHI JKL MNO then press [OK].
4 5 6 Submenu will appear.
PQRS TUV WXYZ
7 8 9
3
Play back the title up to the point
SPACE CLEAR
. 0
where you want to set a new chapter
DISC MENU SETUP mark.
o When it comes to the desired point, press
[PAUSE F].
s OK B
4
TITLE RETURN
Use [K / L] to select “Add”, then press
p
[OK].
j B i e.g.) DVD
+VR Edit - Chapter Mark
F h g C
CHANNEL 1 Add
Delete
-- + Delete All
Chapter 1/ 1
AUDIO HDD DVD TIMER

I NOV/21/07 11:00AM CH12 SP
0:00:59
5
[OK].
+VR Edit - Chapter Mark - Add
1 Yes
No

Chapter 1/ 1
NOV/21/07 11:00AM CH12 SP
Note for adding or deleting chapter marks 0:00:59
• Maximum number of chapter marks in a title is 99 A new chapter mark is now added.
(for HDD/DVD) and the maximum number of chapter
marks in total is no limit (for HDD) / 254 (for DVD).
If the number of the chapter marks exceed the limit, To add more chapter marks, repeat steps 3 to 5.
you cannot add any more chapter marks.
6
• Only with regard to DVD editing, you may not be Press [RETURN] once or repeatedly to
able to add chapter marks depending on the go back to the title list.
duration of the title or the number of chapters. For DVD, the data will be written onto the disc
• Only with regard to DVD editing, remaining time of momentarily.
the disc may decrease when adding chapter marks or
increase when clearing chapter marks depending on This operation may take a
the recording time or edited contents. while to be completed.
• When you search for a point at step 3, you can also
use the special playback functions such as [G],
[D] etc.
80 EN
E2H00UD.indd 80 2007/05/11 10:16:10

EDITING
Introduction
Chapter Marks (Delete)
STANDBY-ON
To delete a chapter mark:
1
SOURCE DTV/TV DISPLAY OPEN/CLOSE Follow steps in “How to Access the
Connections
A Edit Menu” on page 75 to display
.@/: ABC DEF
“Edit” menu.
1 2 3
GHI JKL MNO
2
4 5 6 Use [K / L] to select “Chapter Mark”,
PQRS TUV WXYZ then press [OK].
7 8 9 Submenu will appear.
SPACE CLEAR
Basic Setup
. 0
3
DISC MENU SETUP
Use [H] / [G] to go to the chapter
o with the chapter mark number you
want to delete, then press [PAUSE F].
s OK B
Chapter mark number is displayed on the
TITLE RETURN
preview screen.
p
e.g.) DVD
Recording
j B i +VR Edit - Chapter Mark
F h g C 1 Add
Delete
CHANNEL Delete All
-- + Chapter 2/ 2
AUDIO HDD DVD TIMER
NOV/21/07 11:00AM CH12 SP
Playback
0:00:59
I
4
Use [K / L] to select “Delete”, then
press [OK].
5 Editing
[OK].
Edit - Chapter Mark - Delete
+VR
1 Yes
No
Function Setup
Chapter 2/ 2
NOV/21/07 11:00AM CH12 SP

0:00:59
The selected chapter mark is now deleted.

To delete more chapter marks, repeat steps 3 to
5.
Others
6
go back to the title list.
For DVD, the data will be written onto the disc
momentarily.
Español
Note
• You cannot delete the chapter mark 1.
EN 81
E2H00UD.indd 81 2007/05/11 10:16:10

EDITING
Chapter Marks (Delete All)
To delete all chapter marks:
1
STANDBY-ON
Follow steps in “How to Access the
A “Edit” menu.
.@/: ABC DEF
2
1 2 3 Use [K / L] to select “Chapter Mark”,
GHI JKL MNO
then press [OK].
4 5 6
PQRS TUV WXYZ
7 8 9
3
SPACE CLEAR Use [K / L] to select “Delete All”,
. 0 then press [OK].
DISC MENU SETUP
4
s OK B Use [K / L] to select “Yes”, then press
TITLE RETURN [OK].
p
+VR Edit - Chapter Mark - Delete All
j B i
1 Yes
No
F h g C
Chapter 2/ 2
CHANNEL
-- + F
AUDIO HDD DVD TIMER NOV/21/07 11:00AM CH12 SP

0:00:59

I
All chapter marks are now deleted.

+VR Edit - Chapter Mark
1 Add
Delete
Delete All
Chapter 1/ 1

NOV/21/07 11:00AM CH12 SP

0:00:59
5
Data will be written onto the disc momentarily.
82 EN
E2H00UD.indd 82 2007/05/11 10:16:11

EDITING
Introduction
Dividing a Title
1
You can divide one title into 2 new titles. Edit Menu” on page 75 to display
“Edit” menu.
Connections
2
STANDBY-ON
where you want to divide the title.
When it comes to the desired point, press
A
[PAUSE F].
.@/: ABC DEF
1 2 3
3
GHI JKL MNO Use [K / L] to select “Title Dividing”,
Basic Setup
PQRS TUV WXYZ
7 8 9
SPACE CLEAR
4
. 0 Use [K / L] to select “Yes”, then press
DISC MENU SETUP [OK].
o The title is now divided into 2 new titles, and it
will go back to the title list automatically. Title
Recording
s OK B name of the divided titles are identical, and
TITLE RETURN index pictures are reset to the first scene at this
p point.
j B i
F h g C
CHANNEL
Playback
-- +
AUDIO HDD DVD TIMER

I
Editing
Function Setup

Note
Others
• If an internal HDD or a DVD contains the maximum

number of titles (HDD: 600, DVD+RW/-RW: 49), you
cannot divide any titles.
• With DVD+RW/-RW, you cannot divide the titles if the
total number of chapters has already reached 254.
• When you search for a point at step 2, you can also
Español
[D] etc.
• For DVD, it may start writing data to the disc as you
complete the editing procedure.
EN 83
E2H00UD.indd 83 2007/05/11 10:16:12

EDITING
Deleting a Scene of a Title
1
You can delete a specific part of a title. Follow steps in “How to Access the
STANDBY-ON
“Edit” menu.
2
A
Use [K / L] to select “Scene Delete”,
.@/: ABC DEF then press [OK].
1 2 3 Edit
GHI JKL MNO
4 5 6 1 Scene Delete
Edit Title Name
PQRS TUV WXYZ Chapter Mark
Title Dividing
7 8 9 Protect
SPACE CLEAR
. 0
JAN/ 1/07 12:00AM CH10 LP
DISC MENU SETUP
1 : 25 : 47
o
3
s OK B
TITLE RETURN
p where you want to set a start point
for the scene to be deleted, then
j B i
press [OK].
F h g C
Edit - Scene Delete
CHANNEL
1 Start
-- + End
Preview
AUDIO HDD DVD TIMER Delete

I
JAN/ 1/07 12:00AM CH10 LP
1 : 00 : 00
Start point is now set, and the highlight

automatically moves to “End”.
4
Press [PLAY B] to start playback
again. Play back the title up to the
point where you want to set an end

point, then press [OK].
Edit - Scene Delete
1 Start
End
Preview
Delete
JAN/ 1/07 12:00AM CH10 LP

1 : 15 : 00
End point is now set, and the highlight

automatically moves to “Preview”.
The portion for deletion is indicated in red in the
progress bar at the bottom of the screen.
Note
• When you search for the start/end point at step 3/4,
you can also use the special playback functions such
as [G], [D] etc.
84 EN
E2H00UD.indd 84 2007/05/11 10:16:13

EDITING
Introduction
5 7
With “Preview” highlighted, press Use [K / L] to select “Yes” then press
[OK] to preview the result. [OK].
Before and after 5 seconds of the deleted scene Edit - Scene Delete
can be previewed every time you press [OK].
• If you are not satisfied with the result, use 1 Yes
No
Connections
[K / L] to go back to “Start” or “End”, and try
setting them again.
• If you are satisfied with the result, proceed to
step 6.
JAN/ 1/07 12:00AM CH10 LP
0 : 07 : 00
start point end point
Before “Yes” using [K / L] and then press [OK].
Basic Setup
editing The selected scene is now deleted.
8
Edited
6
Use [K / L] to select “Delete” then
Recording
press [OK].
Edit - Scene Delete
1 Start
End
Preview
Delete
Playback
JAN/ 1/07 12:00AM CH10 LP
1 : 40 : 00
Editing
Function Setup
Others
Español
EN 85
E2H00UD.indd 85 2007/05/11 10:16:14

EDITING
Protecting a Title
1
To prevent the accidental editing, or erasing of the titles, Edit Menu” on page 75 to display
you can protect them in “Edit” menu.
“Edit” menu.
2
STANDBY-ON Use [K / L] to select “Protect”, then
press [OK].
Edit
A
.@/: ABC DEF 1 Scene Delete
1 2 3 Edit Title Name

Chapter Mark
GHI JKL MNO Title Dividing
Protect
4 5 6
PQRS TUV WXYZ
7 8 9 JAN/ 1/07 12:00AM CH10 LP

SPACE CLEAR 1 : 25 : 47
. 0
DISC MENU SETUP
3
o With “OFF ON” selected, press
[OK].
s OK B
Edit - Protect
TITLE RETURN
p 1 OFF ON
j B i
F h g C
CHANNEL
JAN/ 1/07 12:00AM CH10 LP
-- + 1 : 25 : 47
AUDIO HDD DVD TIMER

The title is now protected.
• If the title is already protected, “ON OFF” will
I appear instead. Press [OK], to release the title
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT from protection.
• The protected title will be marked with
icon.
4

86 EN
E2H00UD.indd 86 2007/05/11 10:16:14

EDITING
Introduction
Hiding Chapters
1
You can hide chapters from the title list. Edit Menu” on page 75 to display
Hidden chapters are skipped during playback.
“Edit” menu.
Connections
2
STANDBY-ON
Use [K / L] to select “Hide Chapter”,
then press [OK].
A Submenu will appear.
.@/: ABC DEF
3
1 2 3 Use [H] / [G] to go to the chapter
GHI JKL MNO
you want to hide, then press [PAUSE
4 5 6
Basic Setup
PQRS TUV WXYZ
F].
7 8 9
4
SPACE CLEAR Use [K / L] to select “Hidden”, then
. 0 press [OK].
DISC MENU SETUP
Edit - Hide Chapter
o +VR
1 Visible
Recording
Hidden
s OK B
TITLE RETURN Chapter 2/ 2 Visible
j B i
NOV/21/07 11:00AM CH12 SP
0:00:59
F h g C
CHANNEL The chapter is now hidden.
Playback
-- +
5
AUDIO HDD DVD TIMER Press [RETURN] once or repeatedly to
I
Editing
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible” at the step 4 on this
page.
Function Setup

After that, title list is displayed.
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed on an index picture of the title
Others
list.
1 SP
Hidden
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
NOV/22/07 11:35AM CH13 EP

NOV/22/07 0:10:33
Español
EMPTY TITLE
1:37:52 SP
EN 87
E2H00UD.indd 87 2007/05/11 10:16:15

EDITING
Setting an Index Picture
1
You can set your desired scene as an index picture for
each title.
“Edit” menu.
2
STANDBY-ON Play back the title to find the scene
you want to use as an index picture.
A
When it comes to the desired point,
.@/: ABC DEF
press [PAUSE F].
1 2 3
3
GHI JKL MNO Use [K / L] to select “Index Picture”,
PQRS TUV WXYZ
7 8 9
SPACE CLEAR
4
. 0 Use [K / L] to select “Yes”, then press
DISC MENU SETUP [OK].
o
+VR Edit - Index Picture
s OK B 1 Yes
No
TITLE RETURN
p
j B i
F
NOV/21/07 11:00AM CH12 SP
F h g C
0:00:59
CHANNEL
-- + A new index picture is now set.
AUDIO HDD DVD TIMER
5
I


Note
• If the selected picture for an index picture is
overwritten, the index picture is reset to the first
scene of the title.
• When you search for the point at step 2, you can also
[D] etc.
88 EN
E2H00UD.indd 88 2007/05/11 10:16:16

EDITING
Introduction
Putting Name on Disc
Press [STOP C] if you are playing back a disc.

You can put a name on the disc and change it from this
menu.
1
Press [SETUP].
Connections
STANDBY-ON
2
A press [OK].
.@/: ABC DEF
1 2 3
Basic Setup
3
GHI JKL MNO
4 5 6
Use [K / L] to select “Edit Disc
PQRS TUV WXYZ Name”, then press [OK].
7 8 9 e.g.) DVD+RW
SPACE CLEAR
Disc Edit
. 0
Edit Disc Name
DISC MENU SETUP Erase Disc
o Disc Protect OFF ON
Recording
s OK B A window for entering a title name will appear.
TITLE RETURN
Edit Disc Name
p +VR
A B C
j B i
No Disc Name
a b c
1 2 3
Disc DVD+RW
Total Titles 3 @ ! ?
F h g C Disc Space Used 0:30:48
Disc Protect OFF
Playback
Make Edits Compatible Needed
CHANNEL
-- +
AUDIO HDD DVD TIMER 0:00:00
4
I To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
79.
Editing
When you finish entering a title name, press
[OK].
5
[OK].
Function Setup

The disc name is now updated.
Others
Español
Note
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
EN 89
E2H00UD.indd 89 2007/05/11 10:16:17

EDITING
Erasing Disc

You can erase all titles on a disc.
1
Press [SETUP].
STANDBY-ON
2
SOURCE DTV/TV DISPLAY OPEN/CLOSE Use [K / L] to select “Disc Edit”, then
A
.@/: ABC DEF
press [OK].
1 2 3
GHI JKL MNO
3
4 5 6 Use [K / L] to select “Erase Disc”,
PQRS TUV WXYZ
then press [OK].
7 8 9 e.g.) DVD+RW
SPACE CLEAR
. 0 Disc Edit
DISC MENU SETUP Edit Disc Name

Erase Disc
o Make Edits Compatible
Disc Protect OFF ON
s OK B
TITLE RETURN
p
j B i
F h g C
4
CHANNEL
-- + [OK].
AUDIO HDD DVD TIMER When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
I
Yes
V.REPLAY V.SKIP RAPID PLAY TIME SHIFT No

The contents of the disc is now deleted.

Note
• When you select “Yes” at step 4, all contents of the
disc will be erased.
90 EN
E2H00UD.indd 90 2007/05/11 10:16:18

EDITING
Introduction
Making Edits Compatible

If you have added or deleted chapters, or made chapters
hidden, you must perform “Make Edits Compatible” to
1
see those effects on other unit. Press [SETUP].
Connections
STANDBY-ON
2
press [OK].
A
.@/: ABC DEF
Basic Setup
1 2 3
3
GHI JKL MNO Use [K / L] to select “Make Edits
4 5 6 Compatible”, then press [OK].
PQRS TUV WXYZ
7 8 9
Disc Edit
SPACE CLEAR Edit Disc Name

Erase Disc
. 0 Make Edits Compatible
Disc Protect OFF ON
DISC MENU SETUP
Recording
o
s OK B
TITLE RETURN
p
4
j B i Use [K / L] to select “Yes”, then press
[OK].
Playback
F h g C
CHANNEL Activate the Make Edits Compatible?

-- +
Yes
AUDIO HDD DVD TIMER No
REC REPEAT REC MODE D.DUBBING Data will be written onto the disc momentarily.
I
Editing
Function Setup

Others
Español
EN 91
E2H00UD.indd 91 2007/05/11 10:16:18

EDITING
Deleting All Titles in HDD
STANDBY-ON
1
Press [SETUP].
A
.@/: ABC DEF
2
1 2 3 Use [K / L] to select “HDD Menu”,
GHI JKL MNO
then press [OK].
4 5 6
PQRS TUV WXYZ
7 8 9
3
SPACE CLEAR Use [K / L] to select the desired type
. 0 of deletion, then press [OK].
DISC MENU SETUP Select “Delete All Unprotected Titles” if you want
o to delete only the unprotected titles.
Select “Delete All Titles” if you want to delete all
s OK B titles including the ones protected.
TITLE RETURN
HDD Menu
p
Delete All Titles
Delete All Unprotected Titles
j B i
F h g C
CHANNEL
-- +
AUDIO HDD DVD TIMER
4
I Use [K / L] to select “Yes”, then press
[OK].
Delete entire titles?
Yes
No

Titles are now deleted.

92 EN
E2H00UD.indd 92 2007/05/11 10:16:19

LIST OF SETTINGS
Introduction
The following table is the contents which you can set and the default setting.
Refer to the following table for useful operation.
Setup Items (highlight is the default) Contents
Playback Parental Lock OFF Set the parental level for DVD playback.
Pages 96-99 level 8 [Adult] to 1 [Kid Safe]
Disc Audio Dynamic Range ON Compressing the range of sound volume.
Control OFF
Connections
PCM 48kHz Set whether the sound recorded in 96kHz will
96kHz be down sampled in 48kHz.
Dolby Digital PCM Set the type of sound signal which outputs
Stream from the digital audio output jack.
Disc Menu Language English Set the language for disc menu language.
French
Spanish
Other
Basic Setup
Audio Language Original Set the language for audio.
English
French
Spanish
Other
Subtitle Language OFF Set the language for subtitles.
English
French
Recording
Spanish
Other
Angle Icon ON Set whether or not to display the angle icon.
OFF
Still Mode Auto Set the type of still image in pausing playback.
Field
Frame
Variable Skip / Replay Variable Skip Set the amount of skip time when you press
Playback
General Setting
5 seconds [V.SKIP].
15 seconds
30 seconds
1 minute
5 minutes
Variable Replay Set the amount of rewind time when you
5 seconds press [V.REPLAY].
15 seconds
30 seconds
Editing
1 minute
5 minutes
Display OSD Language English Set the language for OSD (on-screen display).
Pages 100-101 Français
Español
Screen Saver OFF Set the idling time before the screen saver
Function Setup
5minutes starts.
10minutes
15minutes
30minutes
FL Dimmer Auto Set the brightness of the front panel display.
Bright
Dark
CC Style DTV CC OFF Set the type of the DTV closed caption.
Pages 34-36 Service1
Others
Service2
Service3
Service4
Service5
Service6
User Setting ON Set the whether or not CC style setting is
OFF effective.
Font Size Middle Set font size of the displayed caption.
Español
Large
Small
EN 93
E2H00UD.indd 93 2007/05/11 10:16:20

LIST OF SETTINGS
Display CC Style Font Style Style1 Set font style of the displayed caption.
Pages 100-101 Pages 34-36 Style2
Style3
Style4
Style5
Style6
Style7
Style8
Edge Type None Set edge type of the displayed caption.
Raised
Depressed
Uniform
L.Shadow
R.Shadow
Font Opacity Solid Set the font opacity of the displayed caption.
Translucent
Flash
Font Color Transparent Set the font color of the displayed caption.
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Back Opacity Solid Set back opacity of the displayed caption.
Translucent
Flash
General Setting
Back Color Transparent Set back color of the displayed caption.

White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
V-Chip00 Downloadable Rating Set the downloadable rating.
Change Password
Video Progressive Scan ON Set to the progressive scan mode (set to "ON")
Pages 102-103 OFF or to the interlace scan mode(set to "OFF").
TV Aspect 4:3 Letter Box Set a picture size according to aspect ratio of
4:3 Pan & Scan your TV.
16:9 Wide
Video Input E1(Rear) Video In Set the video input type for the external input.
Page 50 S-Video In
E2(Front) Video In
S-Video In
Recording Auto Chapter OFF Insert chapter marks at even time interval.
Page 39 5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Auto Finalize Disc Full ON Set the unit to finalize the disc automatically.
Page 57 OFF
End of Timer Rec ON
OFF
Make Recording Compatible ON Set to prohibiting additional recording (OFF)
Page 39 OFF or to replace the title list after recording (ON).
94 EN
E2H00UD.indd 94 2007/05/11 10:16:20

LIST OF SETTINGS
Introduction
Clock Clock Setting Set the clock.
Pages 29-30 Auto Clock Setting OFF Set the clock automatically.
Auto
Manual
Daylight Saving Time ON(MAR-NOV) Set the clock for the daylight saving time.
General Setting
ON(APR-OCT)
OFF
Connections
Channel Auto Channel Preset Antenna Tune the channels automatically.
Pages 26-28 Cable (Analog)
Cable (Analog/Digital)
Manual Channel Preset Tune the channels manually.
TV Audio Select Stereo Set the analog TV audio type for output and
Page 33 SAP recording.
Reset All Page 104 Yes Set to the default setting.
No
Basic Setup
Note
• Your change to each settings stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
Recording
Playback
Editing
Function Setup
Others
Español
EN 95
E2H00UD.indd 95 2007/05/11 10:16:20

SETUPS
Playback

STANDBY-ON
1
A select “General Setting”, then press
.@/: ABC DEF [OK].
1 2 3 “General Setting” menu will appear.
GHI JKL MNO
4 5 6
2
PQRS TUV WXYZ
Use [K / L] to select “Playback”, then
7 8 9 press [OK].
SPACE CLEAR
General Setting
. 0
Playback
DISC MENU SETUP Display
Video
o Recording
Clock
Channel
Reset All
s OK B
TITLE RETURN
p
j B i
3
F h g C Use [K / L] to select a desired item,
CHANNEL then press [OK].
-- +
1 Parental Lock
AUDIO HDD DVD TIMER
2 Disc Audio
3 Disc Menu Language
REC REPEAT REC MODE D.DUBBING 4 Audio Language
I 5 Subtitle Language
6 Angle Icon
7 Still Mode
8 Variable Skip / Replay
4
Refer to 1 to 8 on pages 97-99 and
set the selected item.

5
When you finish with setting, press
[SETUP] to exit.
96 EN
E2H00UD.indd 96 2007/05/11 10:16:20

SETUPS
Introduction
Playback (cont’d)
1 Parental Lock (Default: OFF) (DVD only) A A password has not been set yet.
Some DVD-video feature a parental lock level. Playback Use [K / L] to select “Yes”. Use [the Number buttons]
will stop if the ratings exceed the levels you set, it will to enter a new password except for 4737, then press
require you to enter a password before the disc will [OK].
Connections
playback. This feature prevents your children from
Change Password? Password Input
viewing inappropriate material.
Yes
Use [K / L] to select the desired level, then press [OK]. No
Yes
Parental Lock Your setting will be activated.
OFF
8 [Adult]
7 [NC 17]
B A password has been set already.
Basic Setup
6 [R]
5 [PG R] • Use [the Number buttons] to enter the current
4 [PG 13] password.
3 [PG]
2 [G] Password Input
1 [Kid Safe]
If a password has not been set yet, proceed to A .

If a password has been set already, proceed to B . Your setting will be activated.
• If you want to change password, use [K / L] to select
Recording
Note “Yes”. Use [the Number buttons] to enter a new
password, then press [OK].
• Parental lock function may not be available to some
discs. <change the password>
• With some DVD, it may be difficult to find if they are Change Password? Password Input
compatible with parental lock. Be sure to check if the
Yes
parental lock function operates in the way that you No
Yes
have set.
Playback
• Record the password in case you forget it. Your setting will be activated.
• If there is a DVD in the unit when you set up the
Note
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level. • Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4,7,3,7
using [the Number buttons] in password input
window. Password will be cleared and parental levels
Editing
will be set to “OFF”.
Function Setup
Others
Español
EN 97
E2H00UD.indd 97 2007/05/11 10:16:21

SETUPS
Playback (cont’d)
2 Disc Audio C Dolby Digital (Default : Stream)

Choose the appropriate audio setting for your external Use [K / L] to select a setting, then press [OK].
device.
Dolby Digital
It will only affect a disc playback.
PCM
Use [K / L] to select a desired item, then press [OK]. Stream
Disc Audio Your setting will be activated.

A Dynamic Range Control PCM : Converts the Dolby Digital into PCM (2 channel).
B PCM When your amplifier/decoder is NOT
C Dolby Digital compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals
When your amplifier/decoder is compatible
A Dynamic Range Control (Default : ON) (DVD only)
with Dolby Digital, set to “Stream”.
Set to “ON” to compress the range between soft and loud
sounds. • With regard to DVD playback, if the audio source is in
Dolby Digital format, set “Dolby Digital” to “PCM” so that
Use [K / L] to select a setting, then press [OK].
you can switch to main audio (L), sub audio (R), or a
Dynamic Range Control combination of both (L / R) using your amplifier /
ON decoder.
OFF
Your setting will be activated. 3 Disc Menu Language (Default : English) (DVD only)
Set the language for disc menu.
Note
• Dynamic range control function is available only with
the titles which are recorded in the Dolby Digital Disc Menu Language
format. English
French
Spanish
B PCM (Default : 48kHz) Other
Use [K / L] to select a setting, then press [OK]. Your setting will be activated.
PCM
4 Audio Language (Default : Original) (DVD only)
48kHz
96kHz Set the audio language.
Your setting will be activated. Use [K / L] to select a setting, then press [OK].
48kHz : If your amplifier/decoder is NOT compatible Audio Language
with 96kHz PCM, select “48kHz”. 96kHz sound Original
will be output in 48kHz. English
96kHz : If your amplifier/decoder is compatible with French
96kHz PCM, select “96kHz”. 96kHz sound will Spanish
Other
be output.
Note • When “Original” is selected, the audio language will be
When playing back disc with copyright protection in the disc’s default language.
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
98 EN
E2H00UD.indd 98 2007/05/11 10:16:22

SETUPS
Introduction
Playback (cont’d)
5 Subtitle Language (Default : OFF) (DVD only) 7 Still Mode (Default : Auto) (DVD only)
Set the subtitle language. Select “Auto” usually.
Use [K / L] to select a setting, then press [OK]. Use [K / L] to select a setting, then press [OK].
Connections
Subtitle Language Still Mode
OFF Auto
English Field
French Frame
Spanish
Other Your setting will be activated.
Your setting will be activated. Auto : Optimum resolution setting (“Field” or
“Frame”) will be selected.
Field : Images in the still mode will be stabilized.
Basic Setup
If “Other” is selected for 3 to 5 , press 4-digit code Frame : Images in the still mode will be highly defined.
using [the Number buttons].
Note
Code Input • Frame is 1 completed video image made up of 2
- - - -
fields (There are 30 frames per second of NTSC video).
• When you finish entering the code, press [OK]. Refer

8
Recording
Variable Skip / Replay
to the language code table on page 109.
Assign [V.SKIP] or [V.REPLAY] to skip or rewind by a
Note certain amount of time when they are pressed.
• Only the languages supported by the disc can be Use [K / L] to select a desired item, then press [OK].
selected.
• Audio language setting may not be available to A Variable Skip
some discs. B Variable Replay
Playback
• You can change or switch off the subtitles on a DVD Refer to the explanations below and set the selected item.
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered A Variable Skip (Default: 30 seconds)
incorrectly.
Sets the amount of skip time for [V.SKIP].
Variable Skip
6 Angle Icon (Default : ON) (DVD only) 5 seconds
15 seconds
Editing
Set to “ON” to show the angle icon during the playback. 30 seconds
Use [K / L] to select a setting, then press [OK]. 1 minute
5 minutes
Angle Icon
ON B Variable Replay (Default: 30 seconds)
OFF
Function Setup
Sets the amount of rewind time for [V.REPLAY].
Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Others
Español
EN 99
E2H00UD.indd 99 2007/05/11 10:16:23

SETUPS
Display

STANDBY-ON
1
A
.@/: ABC DEF
[OK].
1 2 3
2
GHI JKL MNO Use [K / L] to select “Display”, then
4 5 6 press [OK].
PQRS TUV WXYZ
7 8 9
SPACE CLEAR
3
. 0 Use [K / L] to select a desired item,
DISC MENU SETUP then press [OK].
o
1 OSD Language
2 Screen Saver
s OK B
3 FL Dimmer
TITLE RETURN 4 CC Style
p 5 V-Chip
j B i Selection menu will appear.
4
F h g C
Refer to 1 to 5 on page 101 and set
CHANNEL
-- + the selected item.
AUDIO HDD DVD TIMER
• For 4 refer to pages 34-36.
5
REC REPEAT REC MODE D.DUBBING When you finish with setting, press
I

[SETUP] to exit.

100 EN
E2H00UD.indd 100 2007/05/11 10:16:24

SETUPS
Introduction
Display (cont’d)
1) Use [the Number buttons] to enter the access
1 OSD Language (Default : English) password.
Set the language for the on-screen display. If you have not set the password, first, use [the Number
Use [K / L] to select a setting, then press [OK]. buttons] to set the access password, then press [OK].
The number you entered will be stored as the access
Connections
OSD Language password.
English
Français Password Input
Español

2) Use [K / L] to select a desired item, then press [OK].
2 Screen Saver (Default : 10 minutes)
V-Chip
Basic Setup
Set the time to activate the screen saver function on the A Downloadable Rating
TV screen. B Change Password
Screen Saver
A Downloadable Rating
OFF Set the rating system via digital broadcasting, or clear the
5 minutes downloaded ratings.
10 minutes If the broadcasting signal does not have the
Recording
15 minutes downloadable rating information, the message below
30 minutes
will appear.
Downloadable Rating is currently not available.
3 FL Dimmer (Default: Bright)

• This message will also appear when you try to access
Set the front panel display brightness. “DOWNLOADABLE RATING” after you have cleared the
Use [K / L] to select a setting, then press [OK]. downloadable rating information, and the new information has
Playback
not been downloaded since.
FL Dimmer
To set the rating:
Auto Use [K / L] to select “BLOCK SETTING” then press [OK] to
Bright
Dark
show the various types of ratings. Use [K / L] to select a
desired rating to set, then press [OK] to show the levels
You can choose one from “Auto”, “Bright” and “Dark”. for the rating. Use [K / L] to select a level, then press
If “Auto” is selected, the display gets dark when the [OK] to switch “VIEW” or “BLOCK”. If you set one level to
power is off. “BLOCK”, all the higher levels will be turned to “BLOCK”
Editing
automatically.
5 V-Chip To clear the downloadable rating information and its
You can set the viewing limitation for the digital TV setting:
programs to prevent your children from watching Use [K / L] to select “CLEAR DOWNLOADABLE
inappropriate programs. RATING”, then press [OK].
Function Setup
This feature is available only after the digital TV

ratings have been downloaded.
B Change Password
• The ratings can be downloaded by the unit Change the current password.
automatically if it is available in your area. Use [the Number Buttons] to enter new access
password.
Note
• When you forget the access password at step 1),
enter 4,7,3,7 using [the Number buttons] in the
Others
password input window. Password will be cleared.

• Depending on the type of rating system, you may set
the levels individually.
Español
EN 101
E2H00UD.indd 101 2007/05/11 10:16:24

SETUPS
Video

STANDBY-ON
1
A [OK].
.@/: ABC DEF
1 2 3
2
GHI JKL MNO
Use [K / L] to select “Video”, then
4 5 6
PQRS TUV WXYZ
press [OK].
7 8 9
SPACE CLEAR
.
3
0 Use [K / L] to select a desired item,
DISC MENU SETUP
o
then press [OK].
1 Progressive Scan
s OK B 2 TV Aspect
TITLE RETURN 3 Video Input
p
j B i
4
F h g C
Refer to 1 to 2 on page 103 and set
CHANNEL
the selected item.
-- + • For 3 refer to page 50.
AUDIO HDD DVD TIMER
5
When you finish with setting, press
I
[SETUP] to exit.

102 EN
E2H00UD.indd 102 2007/05/11 10:16:25

SETUPS
Introduction
Video (cont’d)
1 Progressive Scan (Default : OFF) 2 TV Aspect (Default: 4:3 Letter Box)

This unit is compatible with the progressive scan system. You can select the TV aspect ratio to match the formats of
The feature provides you with the higher definition what you are playing back with the unit and your TV
images than the traditional output system does. To utilize screen (4:3 standard or 16:9 widescreen TV).
Connections
this feature, you must set progressive scan mode to “ON”. Use [K / L] to select a setting, then press [OK].
1) Use [K / L] to select “ON“, then press [OK]. TV Aspect
Progressive Scan 4:3 Letter Box
ON 4:3 Pan & Scan
OFF 16:9 Wide
If you have a standard TV:

2) Use [{ / B] to select “Yes“, then press [OK]. Select “4:3 Letter Box”, so that black bars appear on the
Basic Setup
top and bottom of the TV screen when playing back a
Activating progressive scan:
Check your TV has progressive scan
wide-screen picture. Select “4:3 Pan & Scan” for a full
and connect with component video cable. height picture with both sides trimmed when playing
back wide-screen picture.
NOTE :
If you have a widescreen TV:
If there is no picture or picture is Select “16:9 Wide”.
distorted after selecting “Yes”,
Recording
Wait about 15 seconds for auto recovery.
Activate? Yes No
3) Use [K / L] to select “Yes“ within 15 seconds, then

press [OK].
Playback
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the component
video cable (commercially available) to connect this
unit to the TV. (Refer to “Method 3” on page 18.) If
not, use the RCA video cable and set the progressive
scan to “OFF” or press and hold [SETUP] for more
than 3 seconds during HDD / DVD playback.
Editing
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
Function Setup
Others
Español
EN 103
E2H00UD.indd 103 2007/05/11 10:16:26

SETUPS
Reset All
Reset the setting to default.
1
[OK].
STANDBY-ON “General Setting” menu will appear.
2
Use [K / L] to select “Reset All”, then
A
.@/: ABC DEF
press [OK].
1 2 3
GHI JKL MNO
3
4 5 6 Select “Yes” using [K / L] , then press
PQRS TUV WXYZ
[OK].
7 8 9
SPACE CLEAR
Reset to factory default?
. 0
DISC MENU SETUP Yes
No
o
4
s OK B
Select “Yes” again using [K / L] ,
TITLE RETURN
p then press [OK].
j B i Are you sure?
Yes
F h g C
No
CHANNEL
-- + Your setting in recording will be initialized.
AUDIO HDD DVD TIMER

I

Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
– OSD language setting
– Channel setting
– Clock setting
– Parental lock setting
– V-Chip setting
– Timer programming information
104 EN
E2H00UD.indd 104 2007/05/11 10:16:26

TROUBLESHOOTING
Introduction
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom Remedy
The power does not turn on. • Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
POWER
The unit turns on automatically • The unit turns on automatically 2 seconds before the timer recording.
Connections
without any operation.
The OSD language menu appears • Finish up the language setting procedure by selecting a language in the
every time the power turns on. OSD language menu. Press [OK] to activate the setting.
The unit does not function. • “ ” or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted.
No picture, sound or menu appears on • Check if the connections are made securely and correctly.
Basic Setup
the screen. • Check if the cables are damaged.
• Check if a correct external input channel is selected on your TV. (Refer to
page 20.)
• Check if you have completed the channel setting. (Refer to pages 26 to 28.)
Clock setting and channel setting • If a recording is in progress, these operations cannot be performed.
cannot be performed.
The unit does not operate properly. • Moisture has condensed inside the unit. Remove the disc and leave the
Recording
unit turned on for about 2 hours until the moisture evaporates. (Refer to
page 4.)
GENERAL
“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
Repairing process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
In a case you intend to cancel the • If you intend to cancel the repairing process, press [OPEN/CLOSE A]
repairing process. on the front panel, then select “Yes” and press [OK]. After that, press
Playback
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
Do you want to cancel a repairing
process? When selecting “Yes”,
repairing process MAY NOT work.
the disc may not be usable.
Yes
No
Repairing
The clock display does not appear in • Check that the AC power cord is connected securely.
the front panel display.
Editing
• (In case of power failure) Check the breaker and clock setting.
When you forget the password for • Please cancel the password and the set level. (Refer to page 97.)
parental lock.
TV channels cannot be changed. • Check if the connections are made securely and correctly.
• Check if the cables are damaged.
CHANNEL
Function Setup
• Try channel setting by following the steps on pages 26 to 28.

Only specific channels do not appear. • The channels may be set to be skipped. (Refer to pages 27 to 28.)
The external input channels (such as • This unit does not skip the external input channels. This is not a
E1 or E2) cannot be skipped. malfunction.
The image from the external device • Try pressing [SOURCE] repeatedly.
GENERAL
cannot be displayed or recorded. • Turn on all connected devices.

• Check if the connections are made securely and correctly.
Others
RECORDING
Recording is impossible. • It is prohibited to make a recording from 2 minutes before the

programmed start time of a timer recording.
• This unit cannot record programs that contain copy protection signal.
HDD / DVD
This is not a malfunction.

• The space of the recording media may be used up. Try deleting
unnecessary titles, or exchange it with the recordable media.
• The maximum number of titles or chapters has exceeded. Delete the
Español
unnecessary titles to make enough space or insert a new recordable media.

EN 105
E2H00UD.indd 105 2007/05/11 10:16:27

TROUBLESHOOTING
Timer recording cannot be • The internal clock of the unit may have been stopped due to a power
HDD/DVD
performed. failure that lasted for more than 30 seconds. Reset the clock. (Refer to
pages 29 to 30.)
Titles which were supposed to be • Titles recorded by the time shift recording function will not be stored
recorded by the time shift in the title list. They may be stored temporarily in the title list, but will
recording function cannot be found be deleted when you exit the time shift recording mode. Time shift
HDD
in the title list. recording mode will stop not only when you press [STOP C] twice, but
RECORDING
also when the disc runs out of space, when the recording time exceeds
12 hours, or when it comes to 2 minutes before timer recording. This is
not a malfunction.
Recording is impossible. • Copy-once programs cannot be recorded on DVD. This is not a
malfunction.
• Check if the disc is protected or finalised. Undo the protection or the
finalisation.
• DVD-RW once formatted on other unit cannot be recorded on this unit
DVD
unless all the contents in the disc are erased.

The indication • “ Writing to Disc 100% ” may remain on screen for the
“ Writing to Disc 100% ” maximum of 20 seconds even after it reached 100%. This is not a
does not disappear. malfunction.
TV aspect ratio does not match • Check the TV aspect ratio. (Refer to page 103.)
your TV screen. • A different aspect ratio will be used when the aspect ratio specified by
the disc is not supported by this unit.
Playback picture is distorted. • During fast forward or fast reverse, playback picture may be distorted.
Color of the picture is abnormal. This is not a malfunction.
GENERAL
• Connect to TV directly. When you connect this unit with the television
via VCR or other devices, the picture may be distorted due to the copy-
protection signal.
• Check if the cables are damaged.
• Keep the equipment which may cause electrical disturbances, such as a
cellular phone, away.
There is no sound, or no subtitle. • Turn on all connected devices.
• Check if the external input channel is set correctly.
Playback does not start from the • Resume function may be activated. Refer to page 65 to cancel the
HDD HDD/DVD
beginning. resume point.

PLAYBACK
HDD playback suddenly stops. • When DVD recording finishes during HDD playback, the unit will stop
the HDD playback, and start writing data to the DVD. This is not a
malfunction.
Playback cannot be performed. • Check if the playable disc is inserted.
• Check if the disc is loaded correctly with the labeled side facing up.
• Discs made on other devices or on personal computers cannot be
played back on this unit unless it is finalised on the device.
Even if it is finalised, the performance of those discs are not guaranteed
on this unit.
• The disc may be dirty or flawed. Clean the disc.
• Check if all the connections are made correctly.
DVD
• Check the parental lock setting. (Refer to page 97.)

• Playback of DVD is prohibited from 2 minutes before the programmed
start time of a timer recording when the recording media is DVD.
There is no sound, or no subtitle. • Check if the “Disc Audio” is set correctly. (Refer to page 98.)
• There is a possibility that the selected subtitle language is not
supported by the disc.
Digital audio setting cannot be • If the audio source is in the Dolby Digital format, set the Dolby Digital
changed to main audio (L), sub Setting to “PCM” in “Playback” menu. (available only for DVD) (Refer to
audio (R) or combination of both. page 98.)
106 EN
E2H00UD.indd 106 2007/05/11 10:16:27

TROUBLESHOOTING
Introduction
Audio language or the subtitle • Multilingual subtitles are not supported by the disc.
language of the DVD cannot be • Some audio languages or the subtitle languages can be changed only
changed. from the disc menu. Please refer to the disc’s manual.
PLAYBACK
Camera angles cannot be changed. • Even though the multi-angle feature is supported by the disc, that does
DVD
not mean all the scenes are shot from multi-angles. Changing angles are
available only for those scenes shot from the multi-angle.
The disc cannot be played back on • Some DVD players do not play back the disc made on other recorder.
Connections
other player even though it is Refer to the manual of the unit.
finalized properly.
Titles cannot be edited or deleted. • The titles or the disc itself may be protected. Cancel the protection by
HDD / DVD
following the steps on page 86 for title protection and page 55 for disc
protection.
Dubbing cannot be executed. • When the number of the titles or the chapters exceeds the maximum
recordable number, the dubbing will not be executed.
Basic Setup
EDITING
• Dubbing of a “copy-once only” program is not possible with this unit.

Titles cannot be edited or deleted. • The titles in the DVD+R/-R cannot be edited or deleted if they are
finalised. If it is DVD-RW, undo the finalisation by following the steps on
page 56.
DVD
The capacity of the disc doesn’t • With DVD+RW/-RW, the disc space will increase only when the last
increase even if the recorded title in the original is deleted. With DVD-R/+R, deleting a title will not
program is deleted. increase the disc space.
Recording
Dubbing cannot be executed. Check if the disc is compatible for recording (refer to page 37).
The remote control does not function. • No batteries in the remote or the batteries may be weak. Replace the
REMOTE CONTROL
batteries.
• Make sure there is no obstacle between the remote and the unit.
• Try getting closer to the unit. (Refer to page 12.)
• If above solutions do not solve the problem, please call an Authorized
Service Center.
Playback
Frequently Asked Questions
– Can I record to CD-RW/-R? No, this unit records only HDD/DVD.
Editing
– Can I play back DVD-video that is bought in another Possible when the region code of the disc is 1 and All.
country?
– Can I connect the unit to my PC? No, you cannot control the unit by PC. Function Setup
– Can I program a timer recording with cable/satellite Yes, you can. Select “E1” or “E2” as your recording
box? channel, and leave the cable / satellite box on (pages 17,
42-45).
– Can I record one channel while watching another It depends on your connection configurations. For
channel using a cable / satellite box? more details, please kindly contact your cable / satellite
provider.
– Can I connect this unit directly to a TV which only has No. You need an RF modulator (commercially available)
an antenna in jack using an RF coaxial cable? to connect this unit to a TV which only has an antenna in
Others
jack (page 16). This unit does not have an RF modulator.
– Can I change the channels on the cable / satellite box No. Changing the channels on the cable / satellite box
using the remote control of this unit? using this unit’s remote control is not possible. You
need to use the remote control supplied with the cable /
satellite box to change the channels on the cable / satellite
box.
Español
EN 107
E2H00UD.indd 107 2007/05/11 10:16:27

TROUBLESHOOTING
Error message Cause Solution
Disc Error • Unplayable disc is inserted in the unit. • Insert the standardized disc which bear
— Please eject the disc. — • The disc is upside down. the marks on page 58.
Playback feature may not be available on • Insert the disc with the labeled side
this Disc. facing up.
Region Error • Playback is not authorized in the region • Insert the DVD-video with region codes
— Please eject the disc. — of the DVD-video which you inserted in 1 or ALL.
Playback is not authorized in your region. the unit.
Parental Lock On • The current selected parental level • Check “Parental Lock” setting in
The current selected parental level prohibits playback. “Playback” menu (page 97).
prohibits playback.
Recording Error • The recording function encountered • You cannot record copy prohibited
This program is not allowed to be the copy prohibited program. programs.
recorded.
Recording Error • You are trying to record the copy-once • You cannot record the copy-once
This program is not recordable in +VR program. program.
mode.
Recording Error • You are trying to record onto the disc • Insert the recordable disc, and ensure
Cannot record on this disc. which is unrecordable, or the disc status the disc status satisfies the recording
is unable to record. requirements (page 37).
• The disc is dirty. • Clean the disc with a cleaning cloth.
• The disc is damaged. • Replace the disc.
Recording Error • You are trying to record on to the • Release the disc protect setting in “Disc
This disc is protected and not recordable. protected disc which is set in “Disc Edit” Edit” menu (page 55).
menu.
Recording Error • You are trying to record onto the disc • Insert the recordable disc with enough
Disc is full. which has no space for recording. recording space.
(No area for new recording)
Recording Error • You are trying to record onto the disc • Delete unnecessary titles (pages 76-77).
You cannot record more than 49 titles on on which the number of recording titles
one disc. comes up to the maximum (49).
(The maximum is 49)
Recording Error • You are trying to record onto the • Delete unnecessary chapter marks
You cannot record more than 254 chapters DVD+RW or DVD-RW on which the (pages 81-82).
on one disc. number of recording chapters comes
(The maximum is 254) up to the maximum (254).
Recording Error • When recordings are performed • Insert a new disc.
You cannot record on this disc as Power repeatedly onto an unstable disc, this
Calibration Area is full. area may come up to be full.
• Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record full
49 titles.
Recording Error • You are trying to record onto the disc • Release the finalizing for this disc
This disc is already finalized. already finalized. (page 56).
Recording Error • You are trying to record onto the • Set “Make Recording Compatible” to
The disc has no recording compatibility. disc that had been recorded by other “ON” to rewrite the menu, after that you
Set “Make Recording Compatible” to recorders. will record to disc (page 39).
“ON” to convert the disc.
Recording Error • You are trying to record onto the HDD • Delete unnecessary titles (pages 76-77).
You cannot record more than 600 titles when total title number is already at its
on HDD. (The maximum is 600). limit.
Recording Error • The internal HDD is dirty or damaged. • Contact the customer service center.
Cannot record on this HDD. • There is not enough space on the • Delete unnecessary titles (pages 76-77).
internal HDD.
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
108 EN
E2H00UD.indd 108 2007/05/11 10:16:27

LANGUAGE CODE
Introduction
Language Code Language Code Language Code
Abkhazian 4748 Hungarian 5467 Russian 6467
Afar 4747 Icelandic 5565 Samoan 6559
Afrikaans 4752 Indonesian 5560 Sangho 6553
Albanian 6563 Interlingua 5547 Sanskrit 6547
Connections
Amharic 4759 Interlingue 5551 Scots Gaelic 5350
Arabic 4764 Inupiak 5557 Serbian 6564
Armenian 5471 Irish 5347 Serbo-Croatian 6554
Assamese 4765 Italian 5566 Sesotho 6566
Aymara 4771 Japanese 5647 Setswana 6660
Azerbaijani 4772 Javanese 5669 Shona 6560
Bashkir 4847 Kannada 5760 Sindhi 6550
Basic Setup
Basque 5167 Kashmiri 5765 Singhalese 6555
Bengali;Bangla 4860 Kazakh 5757 Siswat 6565
Bhutani 5072 Kinyarwanda 6469 Slovak 6557
Bihari 4854 Kirghiz 5771 Slovenian 6558
Bislama 4855 Kirundi 6460 Somali 6561
Breton 4864 Korean 5761 Spanish 5165
Recording
Bulgarian 4853 Kurdish 5767 Sundanese 6567
Burmese 5971 Laothian 5861 Swahili 6569
Byelorussian 4851 Latin 5847 Swedish 6568
Cambodian 5759 Latvian; Lettish 5868 Tagalog 6658
Catalan 4947 Lingala 5860 Tajik 6653
Chinese 7254 Lithuanian 5866 Tamil 6647
Playback
Corsican 4961 Macedonian 5957 Tatar 6666
Croatian 5464 Malagasy 5953 Telugu 6651
Czech 4965 Malay 5965 Thai 6654
Danish 5047 Malayalam 5958 Tibetan 4861
Dutch 6058 Maltese 5966 Tigrinya 6655
English 5160 Maori 5955 Tonga 6661
Esperanto 5161 Marathi 5964 Tsonga 6665
Editing
Estonian 5166 Moldavian 5961 Turkish 6664
Faroese 5261 Mongolian 5960 Turkmen 6657
Fiji 5256 Nauru 6047 Twi 6669
Finnish 5255 Nepali 6051 Ukrainian 6757
French 5264 Norwegian 6061 Urdu 6764
Function Setup
Frisian 5271 Occitan 6149 Uzbek 6772

Galician 5358 Oriya 6164 Vietnamese 6855
Georgian 5747 Oromo (Afan) 6159 Volapuk 6861
German 5051 Panjabi 6247 Welsh 4971
Greek 5158 Pashto; Pushto 6265 Wolof 6961
Greenlandic 5758 Persian 5247 Xhosa 7054
Guarani 5360 Polish 6258 Yiddish 5655
Others
Gujarati 5367 Portuguese 6266 Yoruba 7161

Hausa 5447 Quechua 6367 Zulu 7267
Hebrew 5569 Rhaeto-Romance 6459
Hindi 5455 Romanian 6461
Español
EN 109
E2H00UD.indd 109 2007/05/11 10:16:28

GLOSSARY
Analog Audio PBC (playback control) (video CD only)
An electrical signal that directly represents sound. This function enables you to play back interactive
Compare this to digital audio which can be an electrical software using a menu screen. See also “Video CD”.
signal, but is an indirect representation of sound. See also
“Digital Audio”.
PCM (pulse code modulation)
The most common system of encoding digital audio,
Aspect Ratio found on CD and DAT. Excellent quality, but requires a
The width of a TV screen relative to its height. lot of data compared to formats such as Dolby Digital
Conventional TVs are 4:3 (in other words, the TV screen and MPEG audio. For compatibility with digital audio
is almost square); widescreen models are 16:9 (the TV recorders (CD, MD and DAT) and AV amplifiers with
screen is almost twice as wide as it is high). digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Chapter
Just as a book is split up into several chapters, a title on a Progressive Scan (525p/480p)
DVD is usually divided into chapters. See also “Title”. A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
Component Video Output of each frame in order. Progressive scan provides less
Each signal of luminance (Y) and component (PB/CB, PR/ flickering and higher image resolution than traditional
CR) is independent to output so that you can experience (525i/480i) TV signals. Refer to page 103 for instructions
picture color as it is. on selective progressive scan mode.
Also, due to compatibility with progressive video
(525p/480p), you can experience higher-density picture Region Code
than that in interlace (525i/480i). Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
Digital Audio compatible region codes. You can find the region code
An indirect representation of sound by numbers. During of your unit by looking on the rear panel. Some discs are
recording, the sound is measured at discrete intervals compatible with more than one region (or all regions).
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers. Sampling Frequency
On playback, a digital-to-analog converter generates The rate which sound is measured by a specified interval
an analog signal based on these numbers. See also to turn into digital audio data. The numbers of sampling
“Sampling Frequency” and “Analog Audio”. in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Dolby Digital
The system to compress digital sound developed by SAP (secondary audio program)
Dolby Laboratories. It offers you sound of stereo(2ch) or Sub-audio channel which is delivered separately from
multi channel audio. main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
Finalize
To make DVD, which have been recorded on, possible to S-Video Output
play back in DVD players. With this unit, it is possible to It delivers independently each signal of color(C) and
finalize DVD+R, DVD-RW, and DVD-R. luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
JPEG (joint photographic experts group)
JPEG is a method of compressing still image files. You can Title (DVD only)
copy JPEG files on CD-RW/-R from a computer and play A collection of chapters on DVD. See also “Chapter”.
back the files on this unit.
Track
MP3 (MPEG audio layer 3) Audio CD use tracks to divide up the content of a
MP3 is a method of compressing files. You can copy MP3 disc. The DVD equivalent is called a chapter. See also
files on CD-RW/-R from the computer and play back the “Chapter”.
files on this unit.
Video CD
A digital format for store video data in compact disc.
110 EN
E2H00UD.indd 110 2007/05/11 10:16:28

SPECIFICATIONS
Introduction
General
System DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R
Power requirements 120V AC +/-10%, 60Hz +/-5%
Power consumption 33W (standby: 5.5W)
Dimensions (width x height x depth) 16 9/16 x 2 3/8 x 11 7/16 inches (420 x 59 x 290mm)
Weight 7.5 lbs. ( 3.4kg )
Connections
Operating temperature 41°F (5°C) to 104°F (40°C)
Operating humidity Less than 80% (no condensation)
TV format ATSC / NTSC-M TV standard
Recording
Recording format +VR (video recording) format
DVD+Rewritable, DVD+Recordable
Recording discs
DVD-Rewritable, DVD-Recordable (+VR mode only)
Basic Setup
Video recording format
Sampling frequency 13.5 MHz
Compression format MPEG 2
Audio recording format
Sampling frequency 48 kHz
Compression format Dolby Digital
Tuner
Recording
Tuning system Channel frequency synthesized tuning system
Channel coverage (ATSC / NTSC)
Terrestrial VHF 2~13, UHF 14~69
CATV 2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A
Terminals
Audio input
RCA jack x 2 2V rms (input impedance: more than 22kΩ)
Playback
Front
Video input
RCA jack x 1 1Vp-p (75Ω)
S-video input
Mini DIN 4-pin x 1 Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)
VHF/UHF/CATV input and output
F-type 75Ω unbalanced
Audio input
Editing
RCA jack x 2 2V rms (input impedance: more than 22kΩ)
Audio output
RCA jack x 2 2V rms (output impedance: more than 1kΩ)
Video input
Video output
Rear
Function Setup
S-video input
S-video output
Component video output
RCA jack x 3 Y: 1Vp-p (75Ω) PB/CB: 700mVp-p (75Ω) PR/CR: 700mVp-p (75Ω)
Coaxial digital audio output
RCA jack x 1 500mVp-p (75Ω)
Others
Español
Note
• The specifications and design of this product are subject to change without notice.
EN 111
E2H00UD.indd 111 2007/05/11 10:16:28

HDD & DVD P / R D T: Owner's Manual

Uploaded by

Copyright:

Available Formats

HDD & DVD P / R D T: Owner's Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HDD & DVD P / R D T: Owner's Manual

Uploaded by

Copyright:

Available Formats

Introduction

NEED HELP FAST?

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

© 2007 Funai Electric Co., Ltd.

E2H00UD.indd 1 2007/05/11 10:15:02

The caution marking is located on the rear of the cabinet.

A NOTE ABOUT RECYCLING

E2H00UD.indd 2 2007/05/11 10:15:04

E2H00UD.indd 3 2007/05/11 10:15:04

Avoid the Hazards of Electrical Shock and Fire

Moisture Condensation Warning

Notice for Progressive Scan Output

E2H00UD.indd 4 2007/05/11 10:15:05

recording / replaying program may be lost.

© 2007 Funai Electric Co., Ltd.

E2H00UD.indd 5 2007/05/11 10:15:05

E2H00UD.indd 6 2007/05/11 10:15:06

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover

E2H00UD.indd 7 2007/05/11 10:15:06

E2H00UD.indd 8 2007/05/11 10:15:06

Description refers to DVD+R

Description refers to audio CD

Description refers to video CD with PBC function

E2H00UD.indd 9 2007/05/11 10:15:06

1. STANDBY-ON y button 10. CHANNEL / buttons

E2H00UD.indd 10 2007/05/11 10:15:06

1. ANTENNA IN jack 8. AUDIO OUT jacks

E2H00UD.indd 11 2007/05/11 10:15:08

Installing the Batteries in the Remote Control Using a Remote Control

16feet (5m) 23feet (7m) 16feet (5m)

E2H00UD.indd 12 2007/05/11 10:15:08

1. DISPLAY button 20. CLEAR button

• Press repeatedly to start the one-touch timer

• Press to open or close the disc tray.

E2H00UD.indd 13 2007/05/11 10:15:10

PM : Appears in the afternoon

DB : Appears during dubbing.

HDD : Appears when the unit is in

DVD : Appears when the unit is in

Appears when a disc is loaded

E2H00UD.indd 14 2007/05/11 10:15:10

1 Disconnect the power cord of your TV from the AC outlet.

2 Disconnect RF coaxial cable from antenna input jack of your TV.

3 Connect cables to the unit.

rear of your TV RCA video

• RCA video cable x 1

E2H00UD.indd 15 2007/05/11 10:15:11

VHF / UHF rear of this unit

rear of your RF modulator

Supplied cables used in this connection are as follows:

E2H00UD.indd 16 2007/05/11 10:15:12

RF coaxial cable IN ANTENNA AUDIO IN

AUDIO OUT VIDEO S-VIDEO

Supplied cables used in this connection are as follows:

For more information, please contact your cable/satellite provider.

Note to CATV system installer

E2H00UD.indd 17 2007/05/11 10:15:13

Method 1 Method 2 Method 3

analog audio standard picture good picture better picture