Scribd
Upload
105 views4 pages

Channel Coding and Spreading Rates of CDMA

The document discusses channel coding and spreading rates used in CDMA networks. It provides 25 multiple choice questions about CDMA concepts like spreading factor, chipping rate, Walsh codes, pilot channels, sync channels and paging channels. The questions cover topics like the bandwidth of CDMA signals based on symbol rate, components of spreading factor, chipping rates in IS-95, spreading factor values, PN offsets, uses of different Walsh codes, traffic channel structure, and differences between CDMA2000 and IS-95.

Uploaded by

niteshg11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
105 views4 pages

Channel Coding and Spreading Rates of CDMA

The document discusses channel coding and spreading rates used in CDMA networks. It provides 25 multiple choice questions about CDMA concepts like spreading factor, chipping rate, Walsh codes, pilot channels, sync channels and paging channels. The questions cover topics like the bandwidth of CDMA signals based on symbol rate, components of spreading factor, chipping rates in IS-95, spreading factor values, PN offsets, uses of different Walsh codes, traffic channel structure, and differences between CDMA2000 and IS-95.

Uploaded by

niteshg11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

channel coding and spreading rates of CDMA

Question 1.The larger the symbol rate the __________the bandwidth of the signal.
1. larger
2. smaller
3. square proportional
4. None of the above
Wrong! Looking for answers(s):1

Question 2. The ratio of the code rate to the information bit rate is called
_______________ of the CDMA system
1. spreading factor
2. processing gain
3. Both 1 & 2
4. None of the above
Wrong! Looking for answers(s):3

Question 3. In IS-95, the chipping rate is ___________.


1. 0.1248
2. 1.2288
3. 2.4488
4. 4.4488
Wrong! Looking for answers(s):2

Question 4. In IS-95, the spreading factor is


1. 8
2. 16
3. 32
4. 64
Wrong! Looking for answers(s):4

Question 5. Different cells and cell sectors all use the same short code, but use different
phases or shifts, which is how the mobile differentiates one base station from another.
The phase shift is known as the _________.
1. PN Roll
2. PN Offset
3. PN Delay
4. None of the above
Wrong! Looking for answers(s):2

Question 6. The moment when the Short code wraps around and begins again is called a
____________.
1. PN Roll
2. PN Offset
3. PN Delay
4. None of the above
Wrong! Looking for answers(s):1

1
Question 7. ______________ are created out of Haddamard matrices and Transform.
1. L Code
2. PN Code
3. Walsh codes
4. None of the above
Wrong! Looking for answers(s):3

Question 8. Orthogonal means that cross correlation between Walsh codes is


__________when aligned.
1. zero
2. one
3. infinty
4. None of the above
Wrong! Looking for answers(s):1

Question 9. A base station can communicate on up to ________channels.


1. 42
2. 55
3. 64
4. 142
Wrong! Looking for answers(s):3

Question 10.CDMA has ______ pilot signal, ________synch channel and


_______paging channels.
1. 1,1,1
2. 1,1,8
3. 1,8,1
4. 1,2,8
Wrong! Looking for answers(s):2

Question 11.Walsh 0 is used by __________


1. Pilot Channel
2. Sync Channel
3. Paging Channel
4. Traffic Channel
Wrong! Looking for answers(s):1

Question 12. Walsh 32 is used by __________


1. Pilot Channel
2. Sync Channel
3. Paging Channel
4. Traffic Channel
Wrong! Looking for answers(s):2

Question 13. Walsh 1-7 is used for __________


1. Pilot Channel
2. Sync Channel
3. Paging Channel

2
4. Traffic Channel
Wrong! Looking for answers(s):3

Question 14.The 9-bit number that identifies the pilot phase assignment is called the
_________________.
1. PN Roll
2. PN Offset
3. Pilot Offset
4. None of the above
Wrong! Looking for answers(s):3

Question 15. The base station can transmit traffic data to as many as ________mobiles at
the same time.
1. 8
2. 54
3. 64
4. 96
Wrong! Looking for answers(s):2

Question 16.The data on the paging channel sent by the base station, includes mobile
____________,and is covered by a long code.
1. MSIN
2. ESN
3. IMSI
4. None of the above
Wrong! Looking for answers(s):2

Question 17.The Synchronization message also notifies the mobile of the paging channel
data rate, which may be _______________.
1. 4800 bits/sec.
2. 9600 bits/sec.
3. either 1 or 2
4. None of the above
Wrong! Looking for answers(s):3

Question 18.The Synchronization message also notifies the mobile of the paging channel
data rate, which may be _______________.
1. 4800 bits/sec.
2. 9600 bits/sec.
3. either 1 or 2
4. None of the above
Wrong! Looking for answers(s):3

Question 19. Walsh codes are used only by the base station and in this fashion, it is a
__________CDMA on the forward link, whereas on the return link it is ______________
CDMA,
1. synchronous , synchronous
2. asynchronous, synchronous
3. synchronous, asynchronous

3
4. asynchronous, asynchronous
Wrong! Looking for answers(s):3

Question 20.The closed loop power control also uses an outer loop power control. This
method measures the __________________both by the mobile and the base station and
then adjusts the power according to whether it is acceptable.
1. Bit Error Rate (BER)
2. Frame Error Rate (FER)
3. Power ratio
4. None of the above
Wrong! Looking for answers(s):2

Question 21. One of the big ways in which CDMA 2000 differs from IS-95 is that it
includes ___________.
1. beam forming
2. frequency
3. spreading code
4. None of the above
Wrong! Looking for answers(s):1

Question 22. The system capacity is a direct function of the processing gain for a given
_____________.
1. Eb/N0
2. Ec/It
3. either 1 or 2
4. None of the above
Wrong! Looking for answers(s):1

Question 23.The data rate of sync channel is always ____________ bps.


1. 600
2. 1200
3. 2400
4. 4800
Wrong! Looking for answers(s):2

Question 24.Which of these forms traffic channel?


1. W1-W7
2. W8-W31
3. W33-W63
4. both 2 & 3
Wrong! Looking for answers(s):4

Question 25.Which of this is categorized as reverse channel?


1. Pilot channel
2. Paging Channel
3. Sync channel
4. Access channel
Wrong! Looking for answers(s):4

You might also like