BS2752 C50 Neoprene Rubber

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

BS2752 C50 NEOPRENE RAM GASKET MATERIAL DATA SHEET

BS2752 C50 NEOPRENE RUBBER


MATERIAL SPECIFICATION SHEET

PROPERTY VALUE UNIT

Elastomer Neoprene

Quality BS2752: C50

Colour Black

Grade C25

Hardness 50° Shore A

Specific Gravity 1.35 g/cm²

Tensile Strength 13 MPa

Elongation at Break 300 %

Tear Strength 26 Kg/cm

Compression Set 20 %

Abrasion Resistance 140 mm³

Working Temperature -35 to +125 oC

 Good strength and abrasion properties.


 Resists weathering and oxidative ageing.
 Resistant to some inorganic salts and acids and ozone.
 Flame retardant. Moderate resistance to petroleum based products other than aromatic and
halogenated hydrocarbons.
 These are general properties, which will vary between
grades.

The company’s products are used for a multiplicity of purposes and as the company has no control over the method of their applications or use, the 1
company excludes all conditions or warranties, expressed or implied by statute or otherwise, as to their products and/or their fitness for any particular
purpose. Any technical co-operation between the company and the customer is given for customers assistance only and without liability on the part of
the company

Tel: +44 (0)1209 314 700 - www.ramgaskets.com - E-mail:[email protected]

You might also like