Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    Introduction of Coal

    Uploaded by

    medha
    Coal is a combustible black or brownish-black sedimentary rock composed mostly of carbon and hydrocarbons. It was formed over millions of years from the remains of dead plants. India has the fourth largest coal reserves in the world at over 344 billion metric tons. Coal is primarily used to generate electricity but also has applications in steel production, industries, and domestic use. While coal provides an abundant and inexpensive fuel source, its combustion produces greenhouse gases and other pollutants that impact the environment and human health.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Introduction of Coal

    Uploaded by

    medha
    62 views5 pages
    Coal is a combustible black or brownish-black sedimentary rock composed mostly of carbon and hydrocarbons. It was formed over millions of years from the remains of dead plants. India has the fourth largest coal reserves in the world at over 344 billion metric tons. Coal is primarily used to generate electricity but also has applications in steel production, industries, and domestic use. While coal provides an abundant and inexpensive fuel source, its combustion produces greenhouse gases and other pollutants that impact the environment and human health.

    Original Title

    Introduction of coal

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Coal is a combustible black or brownish-black sedimentary rock composed mostly of carbon and hydrocarbons. It was formed over millions of years from the remains of dead plants. India has the fourth largest coal reserves in the world at over 344 billion metric tons. Coal is primarily used to generate electricity but also has applications in steel production, industries, and domestic use. While coal provides an abundant and inexpensive fuel source, its combustion produces greenhouse gases and other pollutants that impact the environment and human health.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    62 views5 pages

    Introduction of Coal

    Uploaded by

    medha
    Coal is a combustible black or brownish-black sedimentary rock composed mostly of carbon and hydrocarbons. It was formed over millions of years from the remains of dead plants. India has the fourth largest coal reserves in the world at over 344 billion metric tons. Coal is primarily used to generate electricity but also has applications in steel production, industries, and domestic use. While coal provides an abundant and inexpensive fuel source, its combustion produces greenhouse gases and other pollutants that impact the environment and human health.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    Introduction of

    Coal

    Coal, is one of the most important primary fossil fuels, is a solid carbon-rich material that is
    usually brown or black and most often occurs in stratified sedimentary deposits. Coal is defined
    as having more than 50 percent by weight carbonaceous matter produced by the compaction
    and hardening of altered plant remains—namely, peat deposits. Different varieties of coal arise
    because of differences in the kinds of plant material, degree of coalification, and range of
    impurities

    History of coal
    The discovery of the use of fire helped to distinguish humans from other animals. Early fuels
    were primarily wood, straw, and dried dung. References to the early uses of coal are too small
    in amount Coal was used commercially by the Chinese long before it was used in Europe.
    Although no authentic record is available, coal from the Fushun mine in northeastern China may
    have been employed to smelt copper as early as 1000 BCE. Stones used as fuel were said to
    have been produced in China during the Han dynasty.

    Composition of coal
    Coal is mostly carbon with variable amounts of other elements, chiefly hydrogen, sulfur, oxygen,
    and nitrogen. Coal is formed when dead plant matter decays into peat and is converted into coal
    by the heat and pressure of deep burial over millions of years.

    Types of coal
    There are four major types(or “ranks”) of coal. Rank refers to steps in a slow, natural process
    called “coalification,” during which buried plant matter changes into an ever denser, drier, more
    carbon-rich, and harder material. The four ranks or the four types are:

    ● Anthracite
    ● Bituminous
    ● Subbituminous
    ● Lignite
    ● Peat(Peat is not coal, but can eventually transform into coal under the right
    circumstances)
    Process of formation of coal
    The process that creates coal varies slightly in different areas depending on the plants and
    conditions that are present, but the overall process is similar. There are two main phases in coal
    formation: peatification and coalification. Bacterial activity is the main process that creates the
    peat during peatification. Increasing temperature and pressure from burial are the main factors
    in coalification.
    Production of coal in India
    India is the second largest producer of coal in the world, after China. The production of coal was
    730.87 million metric tons in 2019–20, a growth of 0.30% over the previous year. India produced
    12 per cent more coal in the first half of the current financial year, compared to the same period
    last year. The 2021 output is nearly six per cent more than the pre-pandemic year of 2019-
    20.The production of lignite was 42.10 million metric tons in 2018–19, a decrease of 4.92% over
    the previous fiscal. Production of coal and lignite grew by a compound annual growth rate of
    3.58% and 1.23% respectively over the last 10 years.

    There were 36 coal washeries in India as on 31 March 2020 with a total installed capacity of
    143.44 million tonnes per year.

    Coal production in India, 1950–2012

    Abundance of coal in India


    India has the fourth largest coal reserves in the world. As of March 2020, India had 344 billion
    metric tons of the resource. The known reserves of coal rose 5.37% over the previous year, with
    the discovery of an estimated 17.5 billion metric tons.The estimated total reserves of lignite coal
    as of March 2020 were 46 billion metric tons,an increase of 0.57% from the previous year. Coal
    deposits are primarily found in eastern and south-central India. Jharkhand, Odisha, and
    Chhattisgarh accounted for almost 70% of the total known coal reserves in India.

    The energy derived from coal in India is about twice that of the energy derived from oil, whereas
    worldwide, energy derived from coal is about 30% less than energy derived from oil.

    The following table shows the estimated coal reserves in India by state as of 31 March 2020.

    State Coal Reserves (in billion Types of


    metric tonnes) Coalfield

    Jharkhand 85.602 Gondwana

    Odisha 84.652 Gondwana

    Chhattisgarh 69.432 Gondwana

    West Bengal 32.937 Gondwana

    Madhya Pradesh 29.285 Gondwana

    Telangana 22.225 Gondwana

    Maharashtra 12.728 Gondwana

    Andhra Pradesh 1.607 Gondwana

    Bihar 2.751 Gondwana

    Uttar Pradesh 1.062 Gondwana

    Meghalaya 0.576 Tertiary

    Assam 0.525 Tertiary

    Nagaland 0.446 Tertiary

    Sikkim 0.101 Gondwana

    Arunachal Pradesh 0.09 Tertiary

    India 344.02

    Uses of coal
    Coal is seemingly the cheapest and most essential source of energy. Here is a list of all the
    major uses of coal.

    Generating Electricity
    Coal is generally used in thermal power generation which further helps in the production of
    electricity. Powdered coal is burnt at high temperature which further turns water into steam. This
    steam is used to turn turbines at high speed in a strong magnetic field. After this, electricity is
    finally generated.

    Production of Steel
    Coal is a very important resource when it comes to producing steel. In the steel industry, coal is
    used indirectly to make steel. Meanwhile, ammonia gas is usually recovered from coke ovens
    and this is used to manufacture nitric acid, ammonia salts and fertilizers.

    Industries
    Coal is used by many industries to produce or make certain products. Some of the popular
    industries which make use of coal are the cement industry, paper and aluminium industry,
    chemical and pharma industry amongst others.

    Gasification and Liquefaction


    Coal can be turned into a synthetic gas which is a mixture of carbon monoxide and hydrogen.
    These gases are an intermediate product that can be further converted into different products.
    Coal can also be turned into liquid known as synthetic fuels.

    Domestic Use
    In cold regions and in developing or underdeveloped countries coal is still used as fuel for
    cooking and a source of heat.

    Advantages and Disadvantages of coal

    Here are the Advantages of Coal:

    1. It is available in an abundant supply.


    Industrialized countries, including the United States, India, China, and Russia, have a large
    amount of coal that is available to them. Some estimates have the US holding enough coal that
    has already been mined to fuel current resources for the next 400 years. Which means we have
    access to this fuel in abundance, allowing societies to focus on other infrastructure needs.

    2. It has a high load factor.


    Using coal as a fuel provides a society with the potential for continuous power. It also provides a
    high load factor, giving us access to an efficient and predictable level of energy through
    combustion.

    3. Coal offers a rather low capital investment.


    Many of our fuel and power generation technologies are already designed to use coal. This
    limits the amount of a capital investment which is required to create a new societal resource,
    especially when compared to nuclear energy resources.
    4. Carbon capture and storage technologies can reduce potential emissions.
    Safe capture and storage of carbon dioxide, referred to as CCS, is a technology that would
    capture and store the carbon dioxide which is produced by combusting this fossil fuel. This limits
    the amount of potential global warming that would be triggered by an increase of coal use.

    Here are the Disadvantage of coal:

    1. It is not a renewable resource.


    At some point, if we are continuously using coal for our power and energy needs, it will
    eventually be exhausted. As a fossil fuel, there is a limited supply, but at some point, there must
    be a backup plan in place that can be implemented.

    2. Coal contains a high level of carbon dioxide per British Thermal Unit.
    When compared with all forms of energy and power production that we use today, coal contains
    the most carbon dioxide for every BTU that is produced.

    3. Coal power can create high levels of radiation.


    A byproduct of burning coal for power, called “coal ash,” produces radiation. This ash then
    settles around the surrounding areas of the coal plant. Coal combustion can also produce
    mercury, nitrous oxide, heavy metals, and other potential environmental dangers.

    4. Coal emissions are linked to health concerns.


    People who are exposed to coal and its emissions have an increased risk of experiencing
    asthma and other problems like that. Breathing in coal dust is also known to be a cause for lung
    cancer development over time. A coal mining disease called “Black Lung'' can impact total lung
    capacity, is incurable, and is often fatal.

    You might also like