Catalog 3105/USA Proportional Valves
Technical Information Series DPR103C
General Description
The DPR103C Series, Pressure Control Valve is a
normally-closed valve used for reducing inlet pressure (1)
to 20.7-41.4 Bar (300-600 PSI) (depending on model
and coil wattage). A common application of this valve
is as a transmission-shifter valve where a fixed regu-
(3) (2)
lated pressure is required regardless of inlet pressure.
Operation
With the solenoid coil de-energized, the spool is held
in a closed position by spring force. In this mode, the
regulated pressure port is open to tank and the
pressure inlet port is blocked. As a voltage signal is Pressure (3) (2) Tank
applied to the solenoid coil, the spool will begin to Reg.
travel to a position where the pressure inlet port is (1)
connected to the regulated pressure port. At this point,
reduced pressure becomes a function of the voltage
signal. As long as the voltage signal is constant, the
reduced pressure at the regulated pressure port will
remain fixed regardless of any changes in inlet flow or
inlet pressure. As the voltage signal increases or
decreases, the reduced pressure at the regulated
Specifications
pressure port will change with respect to the change in Rated Flow 22.5 LPM (6 GPM)
the voltage signal. Once a full voltage signal is given,
the reduced pressure of the regulated pressure port Maximum Inlet 210 Bar (3000 PSI)
will be at the maximum reduced pressure for that valve Pressure
(i.e. 20.7 Bar (300 PSI) on Model DPR103C03 with 30 Max. Reducing DPR103C03 - 20.6 Bar (300 PSI)
watt coil and 41.4 Bar (600 PSI) on Model Pressure @ .7 A, 30W Coil
DPR103C06 with 30 watt coils). DPR103C06 - 41.2 Bar (600 PSI)
@ .7 A, 30W Coil
Features
Maximum Internal 82 cc/min. at rated pressure
• Direct acting design Leakage
• Adaptable to regulated analog or PWM Hysteresis 4% Maximum
• Contamination tolerant
Cracking 20% of input signal
• Numerous coil terminals and voltages (Deadband)
• One-piece encapsulated coil
Frequency 100 - 400 Hz (200 Hz Preferred)
• Standard valve bodies and common cavities
• Manual override standard. Seal variations and other
options available
Operating Temp.
Range (Ambient)
-40°C to +93.3°C (Nitrile)
(-40°F to +200°F)
-31.7°C to +121.1°C (Fluorocarbon)
(-25°F to +250°F)
Cartridge Material All parts steel. All operating
parts hardened steel.
Body Material Steel or Aluminum
Filtration ISO Code 16/13,
SAE Class 4 or better
Mounting No restrictions
Cavity Common Cavity No. C10-3
dpr103c.pm6.5, bl, lk
Parker Hannifin Corporation
Hydraulic Valve Division
Hydraulics PV52 Elyria, Ohio 44035 USA
Catalog 3105/USA Proportional Valves
Technical Information Series DPR103C
Performance Curves
Pressure Gain Pressure Drop vs. Flow
PSI Bar Hydraulic Oil 135 SSU @ 100°F (28 cSt) PSI Bar Hydraulic Oil 135 SSU @ 100°F (28 cSt)
800 55 150 10.3
125 8.6
600 41
Pressure Drop (∆P)
DPR103C06M 100 6.9
Pressure
400 28 75 5.2
3
o
2t
50 3.5
200 14 o1
3t
DPR103C03M 25 1.7
0 0
A 0 .4 .8 1.2 1.6 2.0 2.4 LPM 8 15 23 30
0
GPM 2 4 6 8
Input Current Flow (Q)
12 VDC, 30W Coil, 200 Hz
Solenoid Coil Specifications
Voltage 10VDC 12VDC 18VDC 24VDC 36VDC 48VDC
Duty HD. HD. HD. HD. HD. HD.
Watts (Nominal) 30 30 30 30 30 30
Amps 3.20 2.30 1.86 1.20 0.88 0.58
Response Time Within Regulating Zone 150ms Wire Class “H” for all voltages
dpr103c.pm6.5, bl, lk
Parker Hannifin Corporation
Hydraulic Valve Division
Hydraulics PV53 Elyria, Ohio 44035 USA
Catalog 3105/USA Proportional Valves
Dimensions Series DPR103C
*Inch equivalents for millimeter dimensions are shown in (**)
Cartridge Only
40.6 31.8
(1.60) (1.25)
3.4 N.m.
(30 In.-Lbs.)
Torque
See Coil
Information
For Terminal
Connectors
8.5
120.5 (.34)
(4.74)
25.4 (1.00) Hex.
22 N.m.
(190 In.-Lbs.)
Torque
46.1 (2)
7/8
(1.81) 14UNF-2A
(3) Thread
Ø 15.8 (1)
(.62)
Cartridge In Body
0.8
(.03)
34.2
(1.35)
54 2 17.8 54
(2.13) (.70) 66.7 (2.13)
(2.63)
3
1
7.1 3.6 R.
(.28) (.14)
6.4 31.8 Typ.
(.25) (1.25) 15.9
50.8 (.63)
(2.00)
31.8
63.5 (1.25)
(2.50)
THIRD-ANGLE
PROJECTION
dpr103c.pm6.5, bl, lk
Parker Hannifin Corporation
Hydraulic Valve Division
Hydraulics PV54 Elyria, Ohio 44035 USA
Catalog 3105/USA Proportional Valves
Ordering Information Series DPR103C
DPR 10 3C M
Proportional Size Type Rated Override Seals Coil Coil Coil Body
Pressure Pressure Option Voltage Wattage Termination Option
Reducing
Valve
Two Position Code Type
Three Way Code Wattage
Omit Nitrile
V Fluorocarbon Omit Cartridge
without Coil
7/8-14UNF-2B
Threaded Cavity H 30 Watt
Code Description
Omit Cartridge Without Coil
Code Pressure Code Type C 1/2″ NPTF Conduit
Connector with
03 20.7 Bar (300 PSI) M Push Type 24″ Class H Wire
@ 70% of Manual Override
Rated Current with Flush Rod D DIN 43650
(Hirschmann) Plug Face
06 20.7 Bar (600 PSI)
@ 70% of P SAE 1B-0.25 SAE Double
Rated Current Spade (DC Only)
Code Type S1 Single 8-32 screw & nut
internally ground (DC Only)
Omit Cartridge Without Coil
W Double wire 24″ Class H
D010 10 VDC (DC Only)
D012 12 VDC W1 Single wire, internally
ground, 24″ Class H
D018 18 VDC (DC Only)
D024 24 VDC
D036 36 VDC Code Port Size & Material
D048 48 VDC
Omit Cartridge Only
4P 1/4″ NPTF (B10-3-4P) Steel
A4P 1/4″ NPTF (B10-3-A4P) Aluminum
6P 3/8″ NPTF (B10-3-6P) Steel
A6P 3/8″ NPTF (B10-3-A6P) Aluminum
Shipping Weight
Cartridge Only .59 kg (1.3 lbs.) 8P 1/2″ NPTF (B10-3-8P) Steel
Cartridge in Body 1.4 kg (3.0 lbs.) A8P 1/2″ NPTF (B10-3-A8P) Aluminum
6T SAE-6 (B10-3-6T) Steel
SERVICE PARTS A6T SAE-6 (B10-3-A6T) Aluminum
Nitrile Seal Kit: SK10-3 Coil Nut: 118127-00 8T SAE-8 (B10-3-8T) Steel
Fluorocarbon Seal Kit: SK10-3V DIN Connector: A8T SAE-8 (B10-3-A8T) Aluminum
Grey - 692914 Black - 692915
4B 1/4″ BSPG (B10-3-4B) Steel
Coil Assemblies
A4B 1/4″ BSPG (B10-3-A4B) Aluminum
851018****** 30 Watt Conduit Coil 851024****** 30 Watt Double Wire Coil
851020****** 30 Watt DIN 851026****** 30 Watt Single Screw Coil 6B 3/8″ BSPG (B10-3-6B) Steel
(Hirschmann) Coil
851028****** 30 Watt Single Wire Coil A6B 3/8″ BSPG (B10-3-A6B) Aluminum
851022****** 30 Watt Double Spade Coil
8B 1/2″ BSPG (B10-3-8B) Steel
******calls out voltage. For example: 851024-012VDC is a 12 volt, 30 watt DC Double Wire coil. A8B 1/2″ BSPG (B10-3-A8B) Aluminum
dpr103c.pm6.5, bl, lk
Parker Hannifin Corporation
Hydraulic Valve Division
Hydraulics PV55 Elyria, Ohio 44035 USA
