Fscil NFSC Fscin PS Afct Ansin: PS Asmin: Asm Fsmin: NFSM Sigil: SGSGP 600-1 Mgtil: Afct
Fscil NFSC Fscin PS Afct Ansin: PS Asmin: Asm Fsmin: NFSM Sigil: SGSGP 600-1 Mgtil: Afct
NFSC
FSCIN;
PS
AFCT=
ANSIN:
PS=
ASMIN:
ASM=
FSMIN:
NFSM
SIGIL:
SGSGP=600-1;
MGTIL:
AFCT=
to know the CSN in which MGW:
@MGTIL:AFVT=42-0-5;
@MGTIL:
IDMG='SANF2',IDTR='TDM/62/1/1/',NTRD=1<31,NPT
R=1,AFVT=20-1-1<31,TYTR=TDM;
@MGTIL:NE=200-0-1;
EQTIN:
AFLR=221-0 ;
MGIL;
MGIL:
IDMG = OPNLABMGW01_03 EGR = LOCAL
AF = MGIA01 PRC = H248 CTPMG =
20
PRMG = A7510MRF IPVM = IPV4 IPA = 10-
40-5-217
SG = 100 FONC = IUA
IDMG = OPNLABMGW7515 EGR = LOCAL
AF = MGIA01 PRC = H248 CTPMG =
30
PRMG = A7515V23 IPVM = IPV4 IPA = 10-
40-1-9
@MGTIL:IDMG='OPNLABMGW04_1';
CEN=1/13-05-30/10 H 20 MN 35/LISTAGE
TERMINAISONS MG
TRAITEMENT TPXMGI ACC
IDMG = OPNLABMGW04_1
@IPAMO;
CEN=1/13-05-29/11 H 19 MN 44/MODIFICATION
ADRESSE IP
TRAITEMENT TXTGES ACC
AF = MGIA1 , FCT = MGI
IPA = 10-40-38-129 ---internet protocol
address
NMSK = 255-255-255-255 ---
subnet mask
AF = MGIB1 , FCT = MGI
IPA = 10-40-38-130
NMSK = 255-255-255-255
AF = PUPE , FCT = POOL , GRIP= 01 ---grip 1 ---
pupe1 fulty then go to pupe reserve
IPA = 10-40-38-131
NMSK = 255-255-255-255
AF = PUPE , FCT = POOL , GRIP= 02 -----grip 2 --
--pupe2 hs then go to pupe reserve
IPA = 10-40-38-132
NMSK = 255-255-255-255
AF = PUPE , FCT = M2UA , GRIP= 01
IPA = 10-40-38-133
NMSK = 255-255-255-255
AF = PUPE , FCT = M2UA , GRIP= 02
IPA = 10-40-38-134
NMSK = 255-255-255-255
AF = ANA1 , FCT = IUA
IPA = 10-40-38-135
NMSK = 255-255-255-255
AF = ANB1 , FCT = IUA
IPA = 10-40-38-136
NMSK = 255-255-255-255
TRAITEMENT TXTGES EXC
INTROGATION IN MGW
Command Description
view mgw conf To display Media Gateway Configuration
view ip conf To display IP Configuration
view h termi sum Display termination summary
view h con all Display all call contexts
view h lib stat Termination mgr status
view ip if IP-Interface
view chass To view chas
view route table IP Route Table
view arp tab IP ARP Table
ls To list all files on flash memeory
view version all Version
view alarm active Check Alarms status
view e1 conf
View the configuration of E1
<link number>
view rip con RIP Configuration
view red group To Check the actual redundancy group configu
view tcp sock TCP Sockets In Use
view tftp conf TFTP Configuration
view h st me H248 media format statistics
view syslog con To display System Log Settings
view date To display the date
view voip def VOIP configuration
View port state
to check port state
<port>
vi rmg r Resource overview on reported & usage
vi rmgr st RMGR STATUS INFO
vi rmgr ca Resource Manager C A C H E parameters / sta
vi vmg status To check the VMGs
def vmg scope
To assure that no VMG is selected
none
def vmg scope 1 To select the VMG 1
View vmg links
Verify the links assigned to the VMG.
assigned
view mtp2 link To check the MTP2 link
view m2ua as
Check AS status
<As-id>
view m2ua asp
Check ASP status
<Asp-id>
view mtp2 status Check MTP2 link status
To see the ch configuration and the state of
vi conf ch
boards.
vi mg hwconf To view the H/W configuration.
vi sdh conf To view actual configuration for RS section,
s1.cim1.1 section and HP-path (SCM data)
vi sdh conf s 1 To view actual LP-/VT-path configuration of li
.cim1.1.* s1.cim1.1.1.1 to s1.cim1.1.63.1 (SCM data
vi sdh conf To view actual configuration for RS section,
s1.cim1.*.* section and HP-path (SCM data)
view conf fan To view Fans and Fantrays Configuration
view conf temp To view Temperature configuration
view mgw h To view Media Gateway HW configuration
vi clock state To view clock configuration
7510MG_Stgt2:ACT-
SCM:1.11(r0)>=19:diag:main:vMG53:SGW0# view
h248 termination s1.cim1.3.2
Vi mtp2 link s1.cim1.3.2.16
510MG_Stgt2:ACT-
SCM:1.11(r0)>=27:diag:main:vMG53:SGW0# vi m2ua
param
7510MG_Stgt2:ACT-
SCM:1.11(r0)>=29:diag:main:vMG53:SGW0# vi m2ua
param
7510MG_Stgt2:ACT-
SCM:1.11(r0)>=30:diag:main:vMG53:SGW0# vi mtp2
link
7510MG_Stgt2:ACT-
SCM:1.11(r0)>=31:diag:main:vMG53:SGW0# vi mtp2
link 1
VIEW from MGW side