Monday, 21 June 2021 8:42 AM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.06.00.138 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= JUL 6, 2021 *
* Time= 20:12:54 *
* *
* Licensed to: only @ ::LAVTeam:: (R) *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.STD
2. START JOB INFORMATION
3. ENGINEER DATE 21-JUN-21
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 0; 2 3.5 0 0; 3 5.5 0 0; 4 8.5 0 0; 5 11.5 0 0; 6 0 0 3; 7 5.5 0 3
9. 8 8.5 0 3; 9 11.5 0 2; 10 8.5 0 2; 11 0 0 6; 12 3.5 0 6; 13 5.5 0 6
10. 14 11.5 0 6; 15 8.5 0 6; 16 5.5 0 8.5; 17 11.5 0 8.5; 18 3.5 0 8.5; 19 0 1.2 0
11. 20 3.5 1.2 0; 21 5.5 1.2 0; 22 8.5 1.2 0; 23 11.5 1.2 0; 24 0 1.2 3
12. 25 5.5 1.2 3; 26 8.5 1.2 3; 27 11.5 1.2 2; 28 8.5 1.2 2; 29 0 1.2 6
13. 30 3.5 1.2 6; 31 5.5 1.2 6; 32 11.5 1.2 6; 33 8.5 1.2 6; 34 5.5 1.2 8.5
14. 35 11.5 1.2 8.5; 36 3.5 1.2 8.5; 37 0 4.2 0; 38 3.5 4.2 0; 39 5.5 4.2 0
15. 40 8.5 4.2 0; 41 11.5 4.2 0; 42 0 4.2 3; 43 5.5 4.2 3; 44 8.5 4.2 3
16. 45 11.5 4.2 2; 46 8.5 4.2 2; 47 0 4.2 6; 48 3.5 4.2 6; 49 5.5 4.2 6
17. 50 11.5 4.2 6; 51 8.5 4.2 6; 52 5.5 4.2 8.5; 53 11.5 4.2 8.5; 54 3.5 4.2 8.5
18. 55 0 7.2 0; 56 3.5 7.2 0; 57 5.5 7.2 0; 58 8.5 7.2 0; 59 11.5 7.2 0
19. 60 0 7.2 3; 61 5.5 7.2 3; 62 11.5 7.2 2; 63 8.5 7.2 2; 64 0 7.2 6
20. 65 3.5 7.2 6; 66 5.5 7.2 6; 67 11.5 7.2 6; 68 8.5 7.2 6; 69 5.5 7.2 8.5
21. 70 3.5 7.2 8.5; 71 3.5 1.2 3; 72 3.5 4.2 3; 73 3.5 7.2 3
22. MEMBER INCIDENCES
23. 1 1 19; 2 19 37; 3 37 55; 4 2 20; 5 20 38; 6 38 56; 7 3 21; 8 21 39; 9 39 57
24. 10 4 22; 11 22 40; 12 40 58; 13 5 23; 14 23 41; 15 41 59; 16 6 24; 17 24 42
25. 18 42 60; 19 7 25; 20 25 43; 21 43 61; 22 8 26; 23 26 44; 24 9 27; 25 27 45
26. 26 45 62; 27 10 28; 28 28 46; 29 46 63; 30 11 29; 31 29 47; 32 47 64; 33 12 30
27. 34 30 48; 35 48 65; 36 13 31; 37 31 49; 38 49 66; 39 14 32; 40 32 50; 41 50 67
28. 42 15 33; 43 33 51; 44 51 68; 45 16 34; 46 34 52; 47 52 69; 48 17 35; 49 35 53
29. 50 18 36; 51 36 54; 52 54 70; 53 19 20; 54 20 21; 55 21 22; 56 22 23; 57 24 71
30. 58 25 26; 59 28 27; 60 29 30; 61 30 31; 62 31 33; 63 33 32; 64 36 34; 65 34 35
31. 66 19 24; 67 24 29; 68 20 71; 69 30 36; 70 21 25; 71 25 31; 72 31 34; 73 22 28
32. 74 28 26; 75 26 33; 76 23 27; 77 27 32; 78 32 35; 79 71 25; 80 71 30; 81 37 42
33. 82 42 47; 83 38 72; 84 48 54; 85 39 43; 86 43 49; 87 49 52; 88 40 46; 89 46 44
34. 90 44 51; 91 41 45; 92 45 50; 93 50 53; 94 37 38; 95 38 39; 96 39 40; 97 40 41
35. 98 42 72; 99 43 44; 100 46 45; 101 47 48; 102 48 49; 103 49 51; 104 51 50
36. 105 54 52; 106 52 53; 107 72 48; 108 72 43; 109 55 60; 110 60 64; 111 56 73
37. 112 65 70; 113 57 61; 114 61 66; 115 66 69; 116 58 63; 117 63 68; 118 59 62
38. 119 62 67; 120 55 56; 121 56 57; 122 57 58; 123 58 59; 124 60 73; 125 63 62

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 1 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 2

39. 126 64 65; 127 65 66; 128 66 68; 129 68 67; 130 70 69; 131 73 65; 132 73 61
40. START GROUP DEFINITION
41. FLOOR
42. _2NDFLOOR2WAY 81 TO 92 94 TO 105 107 108
43. _2NDFLR-ROOF2WAY 87 93 103 104 106
44. _3RDROOF2WAY 109 TO 132
45. END GROUP DEFINITION
46. DEFINE MATERIAL START
47. ISOTROPIC CONCRETE
48. E 2.17185E+07
49. POISSON 0.17
50. DENSITY 23.5616
51. ALPHA 1E-05
52. DAMP 0.05
53. G 9.28139E+06
54. TYPE CONCRETE
55. STRENGTH FCU 27579
56. END DEFINE MATERIAL
57. MEMBER PROPERTY
58. 1 TO 52 PRIS YD 0.3 ZD 0.3
59. 53 TO 80 109 TO 132 PRIS YD 0.2 ZD 0.3
60. 81 TO 108 PRIS YD 0.3 ZD 0.25
61. CONSTANTS
62. MATERIAL CONCRETE ALL
63. SUPPORTS
64. 1 TO 18 FIXED
65. DEFINE REFERENCE LOADS
66. LOAD R1 LOADTYPE DEAD TITLE REF LOAD CASE 1
67. SELFWEIGHT Y 1
68. FLOOR LOAD
69. _2NDFLOOR2WAY FLOAD 3.7 GY
70. _2NDFLR-ROOF2WAY FLOAD 0.71 GY
71. _3RDROOF2WAY FLOAD 0.71 GY
72. END DEFINE REFERENCE LOADS

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.

MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE LOADTYPES.

*** NOTE: MASS MODEL FORMED WILL BE USED IN SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY.
IF MASS MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE GENERATED MASS
WILL BE REPLACED BY THE MASS PROVIDED IN INDIVIDUAL LOADING.

73. FLOOR DIAPHRAGM

74. DIA 2 TYPE RIG HEI 1.2 JOINT 19 TO 36 71
75. DIA 3 TYPE RIG HEI 4.2 JOINT 37 TO 54 72
76. DIA 4 TYPE RIG HEI 7.2 JOINT 55 TO 70 73
77. CHECK SOFT STORY ASCE7

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 2 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 3

FLOOR DIAPHRAGM

************************************************************************************

FLOOR DIAPHRAGM UNIT - KN METE

--------------- ----------------

NO. TYPE FL. LEVEL FL. WT CENTRE OF MASS MASTER JOINT NO.
X Z

2 RIGID 1.200 193.25 6.130 3.867 74

3 RIGID 4.200 533.97 5.896 3.612 75
4 RIGID 7.200 200.27 5.658 3.424 76

************************************************************************************

79. DEFINE UBC LOAD

80. ZONE 0.4 I 1 RWX 8.5 RWZ 8.5 STYP 2 CT 0.0731 NA 1 NV 1
81. REFERENCE LOAD Y

*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE

WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

82. R1 1.0
83. LOAD 1 LOADTYPE SEISMIC TITLE EX
84. UBC LOAD X 1 DEC 1 ACC 0.05
85. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 76 NUMBER OF MEMBERS 132

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 18

Using 64-bit analysis engine.

SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 183

TOTAL LOAD COMBINATION CASES = 0 SO FAR.

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 3 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 4

SOFT STORY CHECK

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 1.20 OK OK
2 4.20 OK OK
3 7.20 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

***********************************************************
* *
* X DIRECTION : Ta = 0.321 Tb = 0.289 Tuser = 0.000 *
* T = 0.289, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1176 x 950.39 = 111.81 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 4 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 5

LOAD NO.: 1 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 1.20 0.00 0.00 0.58 0.42 0.00 0.42

2 4.20 0.00 0.00 0.58 0.42 0.00 0.42
3 7.20 0.00 0.00 0.58 0.42 0.00 0.42

************************************************************************

86. CHANGE
87. LOAD 2 LOADTYPE SEISMIC TITLE EZ
88. UBC LOAD Z 1 DEC 1 ACC 0.05
89. PERFORM ANALYSIS

***********************************************************
* *
* Z DIRECTION : Ta = 0.321 Tb = 0.286 Tuser = 0.000 *
* T = 0.286, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1176 x 950.39 = 111.81 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 5 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 6

LOAD NO.: 2 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 1.20 0.00 0.00 0.58 0.42 0.58 0.00

2 4.20 0.00 0.00 0.58 0.42 0.58 0.00
3 7.20 0.00 0.00 0.58 0.42 0.58 0.00

************************************************************************

90. CHANGE
91. LOAD 3 LOADTYPE DEAD TITLE DL
92. REFERENCE LOAD
93. R1 -1.0
94. LOAD 4 LOADTYPE LIVE TITLE LL
95. FLOOR LOAD
96. _2NDFLOOR2WAY FLOAD -1.9 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

**NOTE** about FLOOR GROUP command

All floor panels in a floor group should lie in a single plane.
If not lying in a single plane break single FLOOR GROUP
command into multiple FLOOR GROUP commands where each
floor group lie in a single plane / height.

97. _2NDFLR-ROOF2WAY FLOAD -0.6 GY

98. _3RDROOF2WAY FLOAD -0.6 GY
99. LOAD COMB 5 ULC, 1.2 DEAD + 0.5 LIVE + 1 SEISMIC (1)
100. 3 1.2 4 0.5 1 1.0
101. LOAD COMB 6 ULC, 1.2 DEAD + 0.5 LIVE + 1 SEISMIC (2)
102. 3 1.2 4 0.5 2 1.0
103. LOAD COMB 7 ULC, 1.2 DEAD + 0.5 LIVE + -1 SEISMIC (1)
104. 3 1.2 4 0.5 1 -1.0
105. LOAD COMB 8 ULC, 1.2 DEAD + 0.5 LIVE + -1 SEISMIC (2)
106. 3 1.2 4 0.5 2 -1.0
107. LOAD COMB 9 ULC, 0.9 DEAD + 1 SEISMIC (1)
108. 3 0.9 1 1.0
109. LOAD COMB 10 ULC, 0.9 DEAD + 1 SEISMIC (2)
110. 3 0.9 2 1.0
111. LOAD COMB 11 ULC, 0.9 DEAD + -1 SEISMIC (1)
112. 3 0.9 1 -1.0
113. LOAD COMB 12 ULC, 0.9 DEAD + -1 SEISMIC (2)
114. 3 0.9 2 -1.0
115. LOAD COMB 13 ULC, 1.4 DEAD
116. 3 1.4
117. LOAD COMB 14 ULC, 1.2 DEAD + 1.6 LIVE
118. 3 1.2 4 1.6
119. LOAD COMB 15 ULC, 1.42 DEAD + 0.5 LIVE + 1.25 SEISMIC (1)
120. 3 1.42 4 0.5 1 1.25
121. LOAD COMB 16 ULC, 1.42 DEAD + 0.5 LIVE + 1.25 SEISMIC (2)
122. 3 1.42 4 0.5 2 1.25

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 6 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 7

128. 3 1.42 1 1.25

129. LOAD COMB 20 ULC, 1.42 DEAD + 1.25 SEISMIC (2)
130. 3 1.42 2 1.25
131. LOAD COMB 21 ULC, 1.42 DEAD + -1.25 SEISMIC (1)
132. 3 1.42 1 -1.25
133. LOAD COMB 22 ULC, 1.42 DEAD + -1.25 SEISMIC (2)
134. 3 1.42 2 -1.25
135. LOAD COMB 23 ULC, 0.68 DEAD + 1.25 SEISMIC (1)
136. 3 0.68 1 1.25
137. LOAD COMB 24 ULC, 0.68 DEAD + 1.25 SEISMIC (2)
138. 3 0.68 2 1.25
139. LOAD COMB 25 ULC, 0.68 DEAD + -1.25 SEISMIC (1)
140. 3 0.68 1 -1.25
141. LOAD COMB 26 ULC, 0.68 DEAD + -1.25 SEISMIC (2)
142. 3 0.68 2 -1.25
143. PERFORM ANALYSIS

144. LOAD LIST 5 TO 12

145. PRINT STORY DRIFT 0.004200
STORY DRIFT 0.004200

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 7 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 8

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATUS

------------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 238

1 0.00 5 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

6 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
7 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
8 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
9 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
10 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
11 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
12 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

2 1.20 5 0.0362 0.0002 0.0362 0.0002 L / 3313 PASS

6 -0.0001 0.0350 0.0001 0.0350 L / 3429 PASS
7 -0.0368 -0.0001 0.0368 0.0001 L / 3261 PASS
8 -0.0005 -0.0349 0.0005 0.0349 L / 3434 PASS
9 0.0363 0.0001 0.0363 0.0001 L / 3306 PASS
10 -0.0000 0.0350 0.0000 0.0350 L / 3430 PASS
11 -0.0367 -0.0001 0.0367 0.0001 L / 3268 PASS
12 -0.0004 -0.0350 0.0004 0.0350 L / 3433 PASS

3 4.20 5 0.2604 0.0029 0.2242 0.0028 L / 1338 PASS

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 8 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 9

6 -0.0028 0.2573 0.0027 0.2223 L / 1349 PASS

7 -0.2628 0.0003 0.2260 0.0004 L / 1327 PASS
8 0.0005 -0.2540 0.0009 0.2191 L / 1369 PASS
9 0.2607 0.0023 0.2244 0.0021 L / 1337 PASS
10 -0.0026 0.2566 0.0025 0.2217 L / 1353 PASS
11 -0.2626 -0.0003 0.2258 0.0002 L / 1328 PASS
12 0.0007 -0.2547 0.0011 0.2197 L / 1365 PASS

4 7.20 5 0.4159 0.0036 0.1554 0.0007 L / 1930 PASS

6 -0.0016 0.4123 0.0012 0.1551 L / 1934 PASS
7 -0.4082 -0.0009 0.1455 0.0012 L / 2062 PASS
8 0.0092 -0.4096 0.0087 0.1556 L / 1928 PASS
9 0.4142 0.0030 0.1535 0.0007 L / 1954 PASS
10 -0.0032 0.4118 0.0007 0.1551 L / 1934 PASS
11 -0.4099 -0.0015 0.1473 0.0011 L / 2036 PASS
12 0.0075 -0.4102 0.0069 0.1555 L / 1929 PASS
146. PRINT DIA CR
DIA CR

************************************************************

CENTRE OF RIGIDITY UNIT - METE

------------------ -----------

DIAPHRAM FL. LEVEL X-COORDINATE Z-COORDINATE

1 1.200 6.382 3.789

2 4.200 6.431 3.757
3 7.200 6.263 3.704

************************************************************

147. FINISH

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 9 of 10

 Monday, 21 June 2021 8:42 AM

STAAD SPACE -- PAGE NO. 10

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= JUL 6,2021 TIME= 20:12:55 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs castillo.anl Page 10 of 10