RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
RS-485 module for Arduino (MAX485 )
Click photo above for details, then hover over upper right for more photos.
This module interfaces an Arduino or similar microcomputer to RS-485. RS485 is used for
Serial Communications over longer distances than direct RS232 or TTL, and supports multiple
units on the same bus (Multi-Drop).
Multiple Units can be connected to the same RS-485 wiring.
All Chip pins are brought out for proper controls
Working voltage: 5V
Board size: 44 (mm) x14 (mm)
